Hello, I have a rooted international HTC One currently running 4.3 Android with Sense 5.0. I am trying to perform an OTA system update that I have received... I downloaded the new 4.4 Android (1.1 GB) and I have selected "Install Update". But when the phone restarts, it just enters recovery and opens TWRP by itself!
So then I try to flash the downloaded OTA file via TWRP, but that also fails... Does anyone know how I can get 4.4 on my HTC One? Thank you
arbank94 said:
Hello, I have a rooted international HTC One currently running 4.3 Android with Sense 5.0. I am trying to perform an OTA system update that I have received... I downloaded the new 4.4 Android (1.1 GB) and I have selected "Install Update". But when the phone restarts, it just enters recovery and opens TWRP by itself!
So then I try to flash the downloaded OTA file via TWRP, but that also fails... Does anyone know how I can get 4.4 on my HTC One? Thank you
Click to expand...
Click to collapse
You can't apply ota with a custom recovery, you need your stock recovery.
arbank94 said:
Hello, I have a rooted international HTC One currently running 4.3 Android with Sense 5.0. I am trying to perform an OTA system update that I have received... I downloaded the new 4.4 Android (1.1 GB) and I have selected "Install Update". But when the phone restarts, it just enters recovery and opens TWRP by itself!
So then I try to flash the downloaded OTA file via TWRP, but that also fails... Does anyone know how I can get 4.4 on my HTC One? Thank you
Click to expand...
Click to collapse
Depending on whats been done to the phone you can eather flash stock recovery and try the update from their or you have to ruu back to stock and take the update that way.
fastboot getvar all will tell you what stock recovery you need or what ruu to use
alray said:
You can't apply ota with a custom recovery, you need your stock recovery.
Click to expand...
Click to collapse
So would you recommend getting stock recovery following nkk71's guide in your signature, or should I just flash a 4.4 rom?
arbank94 said:
So would you recommend getting stock recovery following nkk71's guide in your signature, or should I just flash a 4.4 rom?
Click to expand...
Click to collapse
Do what cIsA said. Check the output of "fastboot getvar all". Look at your main-ver # and find the corresponding stock recovery. There is a thread in general section with a collection of stock recovery.
You can post the output of getvar here minus imei/sn and we will link you the correct recovery.
Okay so I ran a fastboot getvar all, and apparently there is no RUU for my device, because it is Latin American with a CID of HTC_332. (I searched almost everywhere)
Now, after flashing a 4.4 rom I downloaded, my HTC device wasn't turning on anymore (it was getting stuck at the HTC boot logo). So I restored from a backup I made in TWRP, and that didn't work either. So now my problem just got 1000x worse because of a mistake I just made now of completely wiping my device and the OS.
So for the moment I'll try to flash a new boot.img, get S-OFF again, and change the CID to 11111111 (as I have read) where I will then download a RUU I can use. I'll let you know what happens.
Whoa there.. No need to flash boot.IMG.
What's you're steps? I think you are about to make it worse
sent from my mobile device
Okay well I'm in a tight situation atm.
My phone is completely wiped, with no OS or anything. The only thing I have access to is fastboot, and the TWRP bootloader. Also considering my phone is wiped, I believe I have S-ON as well.
So what is the first step to just get a boot going? (unless I'm not completely screwed that is..)
EDIT- I have successfully flashed Android Revolution to my phone from TWRP by pushing the zip via adb fastboot. Got my phone running again. Step 1 complete.
Step 2 now is to get S-OFF again...
Step 3- Change my CID to 11111111 using the SuperCID method (there is no RUU for my Latin American CID; HTC_332)
Step 4- Use an appropriate RUU to get 4.4 stock after I have changed my CID.
Before I continue with these steps, can anyone confirm with me if I am on the right path?
Step 2 - Confirmed.
Step 3 & Step 4 ... What is an appropriate RUU? You have not yet posted a fastboot getvar all output yet. (remove imei)
SaHiLzZ said:
Step 2 - Confirmed.
Step 3 & Step 4 ... What is an appropriate RUU? You have not yet posted a fastboot getvar all output yet. (remove imei)
Click to expand...
Click to collapse
I had the same cid when I bought mine. Irc, MID was PN0711000 with s.w. X.XX.599.X.
so he could use the 1.29.401.2 ruu on htc1guru but he have to change cid.
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
arbank94 said:
EDIT- I have successfully flashed Android Revolution to my phone from TWRP by pushing the zip via adb fastboot. Got my phone running again.
Before I continue with these steps, can anyone confirm with me if I am on the right path?
Click to expand...
Click to collapse
You could just stay with arhd, its a very good rom...
alray said:
You could just stay with arhd, its a very good rom...
Click to expand...
Click to collapse
Agreed!:laugh:
alray said:
I had the same cid when I bought mine. Irc, MID was PN0711000 with s.w. X.XX.599.X.
so he could use the 1.29.401.2 ruu on htc1guru but he have to change cid.
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
You could just stay with arhd, its a very good rom...
Click to expand...
Click to collapse
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>adb push htcrom2.zip /sdcard/
3455 KB/s (1180577030 bytes in 333.659s)
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH392W901414
(bootloader) imei: **************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__332
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e0349bfc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
So yeah... there's no RUU as I said.
alray, in order to use that 1.29.401.2 RUU, what do I have to change my CID to?
EDIT: I'll just stick with your suggestion alray and stay with ARHD lol. (but in case I change my mind, what CID should I change to for that RUU?... so that I won't have to bump this thread or make a new one later)
arbank94 said:
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>adb push htcrom2.zip /sdcard/
3455 KB/s (1180577030 bytes in 333.659s)
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH392W901414
(bootloader) imei: **************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__332
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e0349bfc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
So yeah... there's no RUU as I said.
alray, in order to use that 1.29.401.2 RUU, what do I have to change my CID to?
EDIT: I'll just stick with your suggestion alray and stay with ARHD lol. (but in case I change my mind, what CID should I change to for that RUU?... so that I won't have to bump this thread or make a new one later)
Click to expand...
Click to collapse
These CID:
HTC__001
HTC__J15
HTC__A48
HTC__M27
are compatible with the 1.29.401.2 ruu.zip so i'll suggest you to use HTC__001 if you change your mind. Personally, I would stay on ARHD. No benefit to flash that RUU vs ARHD. ARHD is always up to date...
Related
Please help, I have a big problem!
I accidently flashed a rom that required S-off but my device is S-on and now it keeps rebooting. After that I tried to install Stock Sense(fflashable .zip) but when it almost completed, it failed. Now if I reboot it it doesn't go further than the HTC logo screen. I did some research to flash the stock sense on it but I don't know which RUU I have to flash. My the device is the international version unlocked (m7ul). My radio is radio-4a.17.3250.14
my getvar:
bootloader version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.17.3250.14
version-clpd: None
version-microp: None
version-main:
version-misc: PUT SHIP S-ON
serialno:
imei:
meid: 000000000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC_E11
battery-status: good
battery-voltage: 3914 mV
partition-layout: Generic
security: on
build-mode: ship
boot-mode: fastboot
commitno-bootloader: dirty-d959c75800
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. Total time 0.048s
Please help me
Thanks
LMH1998 said:
Please help, I have a big problem!
I accidently flashed a rom that required S-off but my device is S-on and now it keeps rebooting. After that I tried to install Stock Sense(fflashable .zip) but when it almost completed, it failed. Now if I reboot it it doesn't go further than the HTC logo screen. I did some research to flash the stock sense on it but I don't know which RUU I have to flash. My the device is the international version unlocked (m7ul). My radio is radio-4a.17.3250.14
my getvar:
bootloader version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.17.3250.14
version-clpd: None
version-microp: None
version-main:
version-misc: PUT SHIP S-ON
serialno:
imei:
meid: 000000000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC_E11
battery-status: good
battery-voltage: 3914 mV
partition-layout: Generic
security: on
build-mode: ship
boot-mode: fastboot
commitno-bootloader: dirty-d959c75800
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. Total time 0.048s
Please help me
Thanks
Click to expand...
Click to collapse
read this thread to look for your stock ROM: here and flash it
then if you want S-OFF then follow this detailed guide: here
kamilmirza said:
read this thread to look for your stock ROM: here and flash it
if you want S-OFF then follow this detailed guide: here
Click to expand...
Click to collapse
I don't get any devica-main code so I really don't know which one to download, but I've downloaded one, but when I try to flash it, It always fails at: (boatloader) checking signature.
LMH1998 said:
I don't get any devica-main code so I really don't know which one to download, but I've downloaded one, but when I try to flash it, It always fails at: (boatloader) checking signature.
Click to expand...
Click to collapse
this is because you the tried to flash something (ROM or any other package) with S-ON
you have to flash it with custom recovery, CWM or TWRP
which one you selected?
kamilmirza said:
this is because you the tried to flash something (ROM or any other package) with S-ON
you have to flash it with custom recovery, CWM or TWRP
which one you selected?
Click to expand...
Click to collapse
So I'll tell you my story.
First it was on sense, then I installed OneDroid using TWRP v2.6.3.3, It worked perfectly fine but battery drain was to bad so I decided to return to Sense, so I flashed a flashable .zip. Eveyrthing worked ok. Then I heard that AOKP had better battery life so I downloaded it, but it didn't want to install, It kept saying ERROR. Then I've thought of flashing the Google Play Edition. So here everything went wrong. it tried to flash with TWRP but It got failed aswell. then I flashed CWM on it, installed the Google Play Edition rom and rebooted my phone, after 3 seconds it reboots, and it keeps on rebooting. but eventually I got back into Recovery and flashed the Sense rom that I still had on my phone. But when I was installing that, It got failed. Then I tried to flash TWRP to install the Sense rom, but after I flashed TWRP, I couldn't go back into recovery. Then the phone get stuck on the HTC logo screen.
So now I want to flash Sense with RUU but I don't know which one to install and it fails when I flash the .zip with cmd. It fails at "checking signature".
PLEASE PEOPLE HELP ME, it's my brother phone's and I messed up
LMH1998 said:
So I'll tell you my story.
First it was on sense, then I installed OneDroid using TWRP v2.6.3.3, It worked perfectly fine but battery drain was to bad so I decided to return to Sense, so I flashed a flashable .zip. Eveyrthing worked ok. Then I heard that AOKP had better battery life so I downloaded it, but it didn't want to install, It kept saying ERROR. Then I've thought of flashing the Google Play Edition. So here everything went wrong. it tried to flash with TWRP but It got failed aswell. then I flashed CWM on it, installed the Google Play Edition rom and rebooted my phone, after 3 seconds it reboots, and it keeps on rebooting. but eventually I got back into Recovery and flashed the Sense rom that I still had on my phone. But when I was installing that, It got failed. Then I tried to flash TWRP to install the Sense rom, but after I flashed TWRP, I couldn't go back into recovery. Then the phone get stuck on the HTC logo screen.
So now I want to flash Sense with RUU but I don't know which one to install and it fails when I flash the .zip with cmd. It fails at "checking signature".
PLEASE PEOPLE HELP ME, it's my brother phone's and I messed up
Click to expand...
Click to collapse
are you on TWRP?
if so when you select the ROM to flash, uncheck the verification md5 something
kamilmirza said:
are you on TWRP?
if so when you select the ROM to flash, uncheck the verification md5 something
Click to expand...
Click to collapse
I can't get back into recovery. Getting into the boatloader is the only thing I can do
Please try to find me the right RUU and a RUU that doesn't requires S-off, that would be awesome!
LMH1998 said:
I can't get back into recovery. Getting into the boatloader is the only thing I can do
Please try to find me the right RUU and a RUU that doesn't requires S-off, that would be awesome!
Click to expand...
Click to collapse
tell me your CID, can you remember your main?
flash TWRP via fastboot method (bootloader)
kamilmirza said:
tell me your CID, can you remember your main?
flash TWRP via fastboot method (bootloader)
Click to expand...
Click to collapse
Sorry but I'm super noob in HTC ONE devolpment, I'm more into Xperia devolping but where can I find the CID?
I really can't remember the main.
but the device is bought in Belgium, Europe. Maybe that can help you to find it.
LMH1998 said:
I can't get back into recovery. Getting into the boatloader is the only thing I can do
Please try to find me the right RUU and a RUU that doesn't requires S-off, that would be awesome!
Click to expand...
Click to collapse
i understand you are anxious, but please calm down, before you end up with a brick; (and please don't cross-post, it just get's everybody confused)
I'll be back in a little while, but in the meantime can you confirm,
1- you have bootloader unlocked
2- what OS are you running (Win7 / 8 / 8.1, Ubuntu, Mac)
3- do not type the output of "fastboot getvar all", use copy/paste
nkk71 said:
i understand you are anxious, but please calm down, before you end up with a brick; (and please don't cross-post, it just get's everybody confused)
I'll be back in a little while, but in the meantime can you confirm,
1- you have bootloader unlocked
2- what OS are you running (Win7 / 8 / 8.1, Ubuntu, Mac)
3- do not type the output of "fastboot getvar all", use copy/paste
Click to expand...
Click to collapse
1. I relocked the boatloader because I watched a tutorial on how to flash stock rom so my boatloader is locked.
2. I'm running Windows 7 64bit Ultimate
3. C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4062mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
LMH1998 said:
1. I relocked the boatloader because I watched a tutorial on how to flash stock rom so my boatloader is locked.
2. I'm running Windows 7 64bit Ultimate
3. C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4062mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
Click to expand...
Click to collapse
remove your SERIALNO and IMEI from your post
be patient and good luck :good:
@nkk71 will guide you through and now you are in good hands
kamilmirza said:
remove your SERIALNO and IMEI from your post
be patient and good luck :good:
@nkk71 will guide you through and now you are in good hands
Click to expand...
Click to collapse
i hope you're right.
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
LMH1998 said:
1. I relocked the boatloader because I watched a tutorial on how to flash stock rom so my boatloader is locked.
2. I'm running Windows 7 64bit Ultimate
3. C:\fastboot>fastboot getvar all
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
finished. total time: 0.046s
Click to expand...
Click to collapse
so hboot 1.54 (HTC__E11) = 2.24.401.x firmware.
so first, get yourself unlocked again, we need s-off
use HTCdev to get an unlock token and unlock...
[/QUOTE]so hboot 1.54 (HTC__E11) = 2.24.401.x firmware.
so first, get yourself unlocked again, we need s-off
use HTCdev to get an unlock token and unlock...[/QUOTE]
I unlocked my bootloader again
nkk71 said:
i hope you're right.
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
so hboot 1.54 (HTC__E11) = 2.24.401.x firmware.
so first, get yourself unlocked again, we need s-off
use HTCdev to get an unlock token and unlock...
Click to expand...
Click to collapse
I unlocked my boatloader again
LMH1998 said:
I unlocked my boatloader again
Click to expand...
Click to collapse
:good::good:
do you have a functioning ROM? you'll need to use rumrunner to get s-off
i believe you need a rooted ROM, preferably with unsecured kernel.
what recovery are you on, and what ROM?
nkk71 said:
:good::good:
do you have a functioning ROM? you'll need to use rumrunner to get s-off
i believe you need a rooted ROM, preferably with unsecured kernel.
what recovery are you on, and what ROM?
Click to expand...
Click to collapse
Tha problem is that I don't have any ROM on it now, but I do have a ROM on the memory of the phone(Sense rom) and I'm using TWRP v2.6.3.3 but I can't go into recovery Don't know why...
Nevermind I can get back into recovery but everything got erased
LMH1998 said:
Tha problem is that I don't have any ROM on it now, but I do have a ROM on the memory of the phone(Sense rom) and I'm using TWRP v2.6.3.3 but I can't go into recovery Don't know why...
Nevermind I can get back into recovery but everything got erased
Click to expand...
Click to collapse
i need to go for about an hour (+ or -), can you check your PM....
nkk71 said:
i need to go for about an hour (+ or -), can you check your PM....
Click to expand...
Click to collapse
Yeah ok I can do that.
and btw my CID is HTC__E11
LMH1998 said:
Yeah ok I can do that.
and btw my CID is HTC__E11
Click to expand...
Click to collapse
Sorry didn't come back yesterday, but I'll be online a bit later...
In the meantime, flash the ROM I sent you, and use http://rumrunner.us/ to get s-off
to get the rom to your phone, go to custom recovery (CWM or TWRP), then use one of the following methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip
example of adb push:
Code:
C:\ADB2>[B]adb push Guru_Reset_M7_3.62.401.1.zip /data/media/0/[/B]
2922 KB/s (1102709591 bytes in 368.450s)
note that adb push will not show any kind of progress until it completes (about 5 to 10 minutes).
and finally choose "install" in CWM or TWRP and install it.
then use rumrunner; remember reading the rumrunner instruction (especially the firewall/antivirus etc).
I have been reading a lot of guides and I am still not sure how I can take my Bell phone and bring it back to stock. I have S-OFF and GPE right not which I installed via a zipped RUU.
Now, if I want to get the latest 4.2.2 that Bell made available for the HTC One, I have to somehow be able to get the OTA and have no custom recovery. I could not find an RUU ZIP or EXE for bell (666), only a stock ROM. I could install that but comes the OTA, it won't install because of the custom recovery.
How can I go back to stock from here? I have been told by a few to just stick to the GPE edition but I would like to got back to sense.
Thank you.
Nic2112 said:
I have been reading a lot of guides and I am still not sure how I can take my Bell phone and bring it back to stock. I have S-OFF and GPE right not which I installed via a zipped RUU.
Now, if I want to get the latest 4.2.2 that Bell made available for the HTC One, I have to somehow be able to get the OTA and have no custom recovery. I could not find an RUU ZIP or EXE for bell (666), only a stock ROM. I could install that but comes the OTA, it won't install because of the custom recovery.
How can I go back to stock from here? I have been told by a few to just stick to the GPE edition but I would like to got back to sense.
Thank you.
Click to expand...
Click to collapse
post output of "fastboot getvar all"
remove S/N & IMEI before posting
kamilmirza said:
post output of "fastboot getvar all"
remove S/N & IMEI before posting
Click to expand...
Click to collapse
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ...
(bootloader) imei: ...
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3975mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.076s
Nic2112 said:
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ...
(bootloader) imei: ...
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3975mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.076s
Click to expand...
Click to collapse
your previous CID was BM_001, right?
look into nkk71 SuperGUIDE in my signature
kamilmirza said:
post output of "fastboot getvar all"
remove S/N & IMEI before posting
Click to expand...
Click to collapse
NKK71 helped me bring the phone back to stock GPE, but I'm getting weird problems and I am not sure why, but I remember I didn't have those problems with stock. Stuff like streaming not working over WiFi, MMS messages not sent when I have WiFi enabled, stuff like that.
The problem is that Bell (x.xx.666x.) has no RUU that I can find, only a nandroid which I could use but that won't give me the option to get the OTA (I think)
kamilmirza said:
your previous CID was BM_001, right?
Click to expand...
Click to collapse
I believe so, yes.
Nic2112 said:
NKK71 helped me bring the phone back to stock GPE, but I'm getting weird problems and I am not sure why, but I remember I didn't have those problems with stock. Stuff like streaming not working over WiFi, MMS messages not sent when I have WiFi enabled, stuff like that.
The problem is that Bell (x.xx.666x.) has no RUU that I can find, only a nandroid which I could use but that won't give me the option to get the OTA (I think)
Click to expand...
Click to collapse
yes sadly there is only nandroid of BM right now
I just updated the firmware today, the one I had was for 4.3 so I upgraded that. I'm just not sure if the problems come from the fact that there is no HTC One google edition in Canada and that either my radios or firmware are not working perfectly on bell.
Nic2112 said:
I just updated the firmware today, the one I had was for 4.3 so I upgraded that. I'm just not sure if the problems come from the fact that there is no HTC One google edition in Canada and that either my radios or firmware are not working perfectly on bell.
Click to expand...
Click to collapse
yeah maybe that could be the problem
why not try the nandroid and see how it goes?
Hmm, you are going to have a HBOOT mismatch if you run the Canadian Restock method in my guide posted in my signature, as it uses 1.55HBOOT for 4.3 JB, but you are on 1.56 HBOOT.
However if you run the RUU ZIP file for TELUS, you will get the right HBOOT. http://www.htc1guru.com/dld/ruu-zip...157-04_release_336571_signed_2_decrypted-zip/
Download and rename to Telus.zip
See if you can do this:
fastboot oem writecid TELUS001
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip Telus.zip
fastboot flash zip Telus.zip (You will need to run this command twice due to HBOOT downgrade)
fastboot reboot (if it doesn't reboot automatically)
NOTE: I have not personally ran the ZIP file above, but it should be fine.
Oh Wow, there is a guide for Canadian HTC One, didn't know that!
Are you sure that a Telus RUU will work on a Bell phone? They use different networks I think
SaHiLzZ said:
Hmm, you are going to have a HBOOT mismatch if you run the Canadian Restock method in my guide posted in my signature, as it uses 1.55HBOOT for 4.3 JB, but you are on 1.56 HBOOT.
However if you run the RUU ZIP file for TELUS, you will get the right HBOOT. http://www.htc1guru.com/dld/ruu-zip...157-04_release_336571_signed_2_decrypted-zip/
Download and rename to Telus.zip
See if you can do this:
fastboot oem writecid TELUS001
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip Telus.zip
fastboot flash zip Telus.zip (You will need to run this command twice due to HBOOT downgrade)
fastboot reboot (if it doesn't reboot automatically)
NOTE: I have not personally ran the ZIP file above, but it should be fine.
Click to expand...
Click to collapse
As I said, i have no personally tested it, but thats the only way to bring your HBOOT down to 1.55.
Other option will be to go all the way down to 1.44 HBOOT. You NEED to be comfortable with using adb/fastboot commands REGARDLESS whichever options you decide to go with.
SaHiLzZ said:
As I said, i have no personally tested it, but thats the only way to bring your HBOOT down to 1.55.
Other option will be to go all the way down to 1.44 HBOOT. You NEED to be comfortable with using adb/fastboot commands REGARDLESS whichever options you decide to go with.
Click to expand...
Click to collapse
I know how to go back to 1.44, I have done that before.
So what you are saying is that if I have the nandroid installed, and stock recovery from your thread, the phone will detect the OTA? It should install no problem because it will be a standard recovery.
Yes 1.44 HBOOT, 1.44 Compatible BELL Nandroid, and Stock recovery will give you future OTAs.
SaHiLzZ said:
Yes 1.44 HBOOT, 1.44 Compatible BELL Nandroid, and Stock recovery will give you future OTAs.
Click to expand...
Click to collapse
Thatk you, one last question before I try this, the OTA, will it replace the radios and firmware as well to Bell's? I guess it depends on what they put in the OTA.
Yes, OTA generally contain new OS, HBOOT, Recovery, and RADIO, practically a full RUU replacement, but not all. IF you are S-ON, you will need to lock bootloader after loading stock recovery, but if you are S-OFF, that doesnt matter, and I will suggest to stay S-OFF!
Please help
I have bell HTC one M7 one Hboot 1.56 the phone boot loader is unlocked rooted and soff the mic is not working on phone I need to set back to stock I can have warranty fix phone can anyone please help me get back to stock so they cant tell it was touched
ginuwine96 said:
I have bell HTC one M7 one Hboot 1.56 the phone boot loader is unlocked rooted and soff the mic is not working on phone I need to set back to stock I can have warranty fix phone can anyone please help me get back to stock so they cant tell it was touched
Click to expand...
Click to collapse
Check the signature block of the previous post (nkk71's SuperGUIDE to returning 100% back to stock) or this one Return to 100% Stock Guide and follow it.
Not sure what file I need
majmoz said:
Check the signature block of the previous post (nkk71's SuperGUIDE to returning 100% back to stock) or this one Return to 100% Stock Guide and follow it.
Click to expand...
Click to collapse
This is my phones Info I am not sure what file to use for it ?
bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4258mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
ginuwine96 said:
This is my phones Info I am not sure what file to use for it ?
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-main: 4.19.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
Click to expand...
Click to collapse
If you're going to follow my guide, you'll need to use CWM method, using this nandroid: http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-bm___001-1-29-666-5-zip/
make sure to have read it once or twice, to be sure you're comfortable with the process
Help please?? I am trying to RUU my HTC One. I successfully relocked my bootloader.
However, when I start the process, it fails (unknown error). I am told that I need to use the "correct" RUU and try again. My problem is that the one I am using claims to be correct. Sprint_HTD_One_m7wls_1.29651.10_RUU.zip
I have noticed that when I am going through the RUU process I am shown the screen that asks to compare the current version with the new one. The current image version is blank. Nothing there. No current image version at all.
slaldrich said:
Help please?? I am trying to RUU my HTC One. I successfully relocked my bootloader.
However, when I start the process, it fails (unknown error). I am told that I need to use the "correct" RUU and try again. My problem is that the one I am using claims to be correct. Sprint_HTD_One_m7wls_1.29651.10_RUU.zip
I have noticed that when I am going through the RUU process I am shown the screen that asks to compare the current version with the new one. The current image version is blank. Nothing there. No current image version at all.
Click to expand...
Click to collapse
post the output of ''fastboot getvar all'' except imei and sn
alray said:
post the output of ''fastboot getvar all'' except imei and sn
Click to expand...
Click to collapse
Here it is:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: N/A
version-cpld: none
version-microp:none
version- main:
version -misc: PVT SHIP S-ON
serialno: (you asked this not be included) but it is present
meid: number present, not included
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery status: good
battery voltage: 4280mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate 11
gencheckpt: 0
I also notice that on the fastboot screen, it reads:
**TAMPERED**
**RELOCKED**
**SECURITY WARNING**
m7_WLS PVT SHIP S-ON RH
HBOOT- 1.56.0000
OpenDSP- v32. 120.274.0909
OS- (blank)
eMMC-boot 2048 MB
Jan.23 2014, 22:11:35.0
thanks for looking at this!
slaldrich said:
Here it is:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: N/A
version-cpld: none
version-microp:none
version- main:
version -misc: PVT SHIP S-ON
serialno: (you asked this not be included) but it is present
meid: number present, not included
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery status: good
battery voltage: 4280mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate 11
gencheckpt: 0
thanks for looking at this!
Click to expand...
Click to collapse
The RUU you are trying to flash is a downgrade, thats why you can't flash it. 1.29.651.10 is for hboot 1.44 and you are on 1.56. You need s-off to downgrade with a ruu.
Refer to the sprint htc one forum to see if this is possible to s-off your phone on hboot 1.56 and then downgrade using the ruu
or
flash a rom for sprint htc one.
alray said:
The RUU you are trying to flash is a downgrade, thats why you can't flash it. 1.29.651.10 is for hboot 1.44 and you are on 1.56. You need s-off to downgrade with a ruu.
Refer to the sprint htc one forum to see if this is possible to s-off your phone on hboot 1.56 and then downgrade using the ruu
or
flash a rom for sprint htc one.
Click to expand...
Click to collapse
I understand s-off isn't possible. can you give me direction for getting started with your second suggestion "flash a rom for sprint htc one"?
slaldrich said:
I understand s-off isn't possible. can you give me direction for getting started with your second suggestion "flash a rom for sprint htc one"?
Click to expand...
Click to collapse
first your bootloader is relocked, you'll need to unlock it.
flash twrp recovery for M7WLS (sprint variant)
then download a sprint compatible rom. You can find them here .
push it to your phone and flash it.
If you have questions about how to do any of these steps ask me here, we'll go step by step...
alray said:
first your bootloader is relocked, you'll need to unlock it.
flash twrp recovery for M7WLS (sprint variant)
then download a sprint compatible rom. You can find them here .
push it to your phone and flash it.
If you have questions about how to do any of these steps ask me here, we'll go step by step...
Click to expand...
Click to collapse
My basic problem is that my radios were not connecting with Sprint at all. So, I understand that I need to do a RUU to fix that. Flashing a custom rom won't fix that (?). Now, I am unlocked with S-on. I have TWRP available. When I reboot, I am taken to the HTC lock screen, but if I unlock it, I get a white HTC screen that lets me do nothing.
I just want to get it back to what I had when I took it out of the box. If you can walk me though this, I would appreciate it. I am NH if we can do this vocally.
slaldrich said:
I just want to get it back to what I had when I took it out of the box. If you can walk me though this, I would appreciate it. I am NH if we can do this vocally.
Click to expand...
Click to collapse
With s-on, its not possible to use the available ruu. You could use the latest guru reset rom available for your phone. Select the option to wipe, install stock recovery and stock radio.
http://www.htc1guru.com/dld/guru_reset_m7_sprint_3-04-651-2-zip/
alray said:
With s-on, its not possible to use the available ruu. You could use the latest guru reset rom available for your phone. Select the option to wipe, install stock recovery and stock radio.
Is it possible to get my s-off again? If so, how might I do that?
Click to expand...
Click to collapse
slaldrich said:
alray said:
With s-on, its not possible to use the available ruu. You could use the latest guru reset rom available for your phone. Select the option to wipe, install stock recovery and stock radio.
Is it possible to get my s-off again? If so, how might I do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2633276
Click to expand...
Click to collapse
alray said:
slaldrich said:
okay, I got s-off. now, how do I downgrade hboot?
or
where do I go from here?
and... I really appreciate this!!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
slaldrich said:
alray said:
slaldrich said:
okay, I got s-off. now, how do I downgrade hboot?
or
where do I go from here?
and... I really appreciate this!!
Click to expand...
Click to collapse
download this ruu.zip http://www.htc1guru.com/dld/ruu-zip-m7_wls_jb_50_sprint_1-29-651-10_ruu_decrypted-zip/
save it in the same folder where adb and fastboot are
reboot your phone in bootloader mode, select fasboot, plug your usb cable.
open your command prompt from fastboot/adb folder
type:
Code:
fastboot oem rebootRUU
(make sure you use capital letter for RUU)
your phone will reboot in ruu mode, a black screen with a silver HTC logo
then type:
Code:
fastboot flash zip <name_of_ruu_you_have_downloaded>.zip (without < and >)
wait for the ruu to flash. It will probably output something like: failed, flush image again so do the same command again
Code:
fastboot flash zip <name_of_ruu_you_have_downloaded>.zip (without < and >)
then
Code:
fastboot reboot
your phone should boot to your stock rom.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
the download link from htcguru is broken... no download available there
Is there anything else I can use? a different link, perhaps?
slaldrich said:
the download link from htcguru is broken... no download available there
Is there anything else I can use? a different link, perhaps?
Click to expand...
Click to collapse
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
alray said:
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
Click to expand...
Click to collapse
The download has begun working but all my attempts truncate/stop at around 20MB... Nowhere near 1gb. I will keep trying -- because right now I have an HTC One with working Cyanogenmod... but no connectivity at all with Sprint.
Do you happen to have a copy you can throw in dropbox for me?
And... this is the first time I've ever used these forums, so, I am still learning what I am doing. Thanks for your patience
I did download a rom called
Sprint_HTC_One_3.04.651.2_Stock_Rooted_Odexed.zip
If I flash this, will it fix my radios or will it just put me deeper in the hole?
I am on my 10th try for the htc1guru ... but none has made it past 40mb
alray said:
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
Click to expand...
Click to collapse
I finally was able to download the entire file. Then, I carefully followed instructions as you sent...
At last step, I received a "failed 32 header error"
so, I repeated the flashboot flash zip command again. same error
repeated a third time. same error
did fastboot reboot and.... nothing still at cyanogenmod with no connectivity. It didn't take.
It went as planned up until the Failed message.
Please tell me you have another idea or a way to deal with this.
alray said:
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
Click to expand...
Click to collapse
I did finally get the entire file... and did everything you suggested. Unfortunately, I got a Failed remote "32 header error"
I repeated the whole procedure a second time. Still nothing. I checked the MD5 of the file and it apparently was corrupt.
SO... I was back to Cyanogenmod 11 with no Sprint. As a last ditch try before retiring to bed, I came upon a zip file that said it had Sprint radio files. I figured, heck, what have I got to lose? So, I flashed the small zip. and POOF... works! My phone is back AND I didn't have to go back to stock.
I do want to say THANK YOU for all your help. Knowing you were there to help me along encouraged me not to throw my phone under a passing truck. I am sure that once we got that dang file downloaded correctly, it would have worked.
Even though it didn't turn out as we started.... your help was immeasurable for me. Thanks again.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA34NS902058
(bootloader) imei: 99-------------------1
(bootloader) meid: 99-----------------
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3885mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
after flash custom rom imei & baseband gone plezzzzzz help n i can not flash any RUU or official rom
smrussel said:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA34NS902058
(bootloader) imei: 99-------------------1
(bootloader) meid: 99-----------------
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3885mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
after flash custom rom imei & baseband gone plezzzzzz help n i can not flash any RUU or official rom
Click to expand...
Click to collapse
Did you flashed a sprint compatible custom rom? You can't flash custom roms for the M7_UL on your m7_wls, both phones haves different partitions layout. Reflash a sprint custom Ron using a sprint compatible custom recovery or flash the latest sprint ruu from htc website (Google search: htc support rom download).
Sent from my HTC One using XDA Labs
alray said:
Did you flashed a sprint compatible custom rom? You can't flash custom roms for the M7_UL on your m7_wls, both phones haves different partitions layout. Reflash a sprint custom Ron using a sprint compatible custom recovery or flash the latest sprint ruu from htc website (Google search: htc support rom download).
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
i tried to flash with sprint Ruu but flash could not complete due to an error
I just bought an HTC M7 and I can't update OTA although it prompted me with an update
It says variant system version and something
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.708.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3907mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-14eb688c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
and this is the bootloader screen
***LOCKED***
M7_UL PVT SHIP S-OFF RH
CID-1111111
HBOOT-1.55.0000
RADIO 4A.21.3263.04
OPENDSP-V32.120.274.0909
OS-3.63.708.3
EMMC-BOOT 2048MB
OCT 29 2013 17:34:05:0
TakChan said:
I just bought an HTC M7 and I can't update OTA although it prompted me with an update
It says variant system version and something
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.708.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3907mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-14eb688c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
and this is the bootloader screen
***LOCKED***
M7_UL PVT SHIP S-OFF RH
CID-1111111
HBOOT-1.55.0000
RADIO 4A.21.3263.04
OPENDSP-V32.120.274.0909
OS-3.63.708.3
EMMC-BOOT 2048MB
OCT 29 2013 17:34:05:0
Click to expand...
Click to collapse
you have s-off and super cid and most likely custom recovery
you need stock recovery and and the missing files from unlocking the bootloader. This is discussed 100's of times in the forums. Your choice is flash a RUU (loose everything) and take all the OTA updates. Or locate the stock recovery and missing files and restore them then take the OTA update.
clsA said:
you have s-off and super cid and most likely custom recovery
you need stock recovery and and the missing files from unlocking the bootloader. This is discussed 100's of times in the forums. Your choice is flash a RUU (loose everything) and take all the OTA updates. Or locate the stock recovery and missing files and restore them then take the OTA update.
Click to expand...
Click to collapse
I think I prefer RUU
Can you kindly do a step by step or just share a link to the guide?
TakChan said:
I think I prefer RUU
Can you kindly do a step by step or just share a link to the guide?
Click to expand...
Click to collapse
Seems their is no RUU for 3.63.708.3 only an OTA that may contain the files you need. >> http://www.htc1guru.com/dld/ota_m7_...-24-708-4_release_339322l8015akovncw94nh-zip/
clsA said:
Seems their is no RUU for 3.63.708.3 only an OTA that may contain the files you need. >> [
Click to expand...
Click to collapse
I've downloaded the file
What to do now? ._.
TakChan said:
I just bought an HTC M7 and I can't update OTA although it prompted me with an update
It says variant system version and something
Click to expand...
Click to collapse
Your problem here is the modelid (MID) is shown as a EU MID - PN0710000
and the correct MID for xx.x.708.x is PN0714000
Do you have root in your current ROM ?
If yes then you need to change the MID to PN0714000
See this thread on how-to : http://forum.xda-developers.com/showthread.php?t=2490792
post #2 - for other gsm international m7_ul PN0714000
TakChan said:
I've downloaded the file
What to do now? ._.
Click to expand...
Click to collapse
Nothing ... until you fix the wrong MID
Or make a total change to EU version, then you can start with a EU RUU with lower version and do many OTA to the latest version.
ckpv5 said:
Your problem here is the modelid (MID) is shown as a EU MID - PN0710000
and the correct MID for xx.x.708.x is PN0714000
Do you have root in your current ROM ?
If yes then you need to change the MID to PN0714000
See this thread on how-to : http://forum.xda-developers.com/showthread.php?t=2490792
post #2 - for other gsm international m7_ul PN0714000
Nothing ... until you fix the wrong MID
Or make a total change to EU version, then you can start with a EU RUU with lower version and do many OTA to the latest version.
Click to expand...
Click to collapse
I fixed the MID to PN0714000 and it fixed the "variant version" prompt but then it boot into twrp and it wont update
TakChan said:
I've downloaded the file
What to do now? ._.
Click to expand...
Click to collapse
open it in 7zip and extract the firmware.zip to your desktop
this has the stock recovery in it.
then back in 7zip you need the system/priv-app folder
this should contain the missing files from unlocking the bootloader. They could also be in system/app. You'll have to check what errors you get during the update to see what files are failing the check / Missing
TakChan said:
I fixed the MID to PN0714000 and it fixed the "variant version" prompt but then it boot into twrp and it wont update
Click to expand...
Click to collapse
Great ... you fixed the main problem.
And the second problem is the recovery, as mentioned before you need a stock recovery
Grab it here : http://d-h.st/7di
You may have another problem ... how to flash this stock recovery.
Since you managed to fix the variant version problem, then I guess you have root in your ROM.
Unlock the bootloader with this guide : http://forum.xda-developers.com/showthread.php?t=2475914
see : to UNLOCK your bootloader,enter the following:
then fastboot flash the stock recovery
try again and see whether you have any error. The only one I can guess is your ROM may not have the preload files ... fix this one later if there is a problem. If no problem then everything should be good.
---------- Post added at 02:18 AM ---------- Previous post was at 01:52 AM ----------
clsA said:
open it in 7zip and extract the firmware.zip to your desktop
this has the stock recovery in it.
then back in 7zip you need the system/priv-app folder
this should contain the missing files from unlocking the bootloader. They could also be in system/app. You'll have to check what errors you get during the update to see what files are failing the check / Missing
Click to expand...
Click to collapse
Correct ... the stock recovery can be extracted from firmware.zip
And I think he may need files from /data/preload/
ckpv5 said:
Great ... you fixed the main problem.
And the second problem is the recovery, as mentioned before you need a stock recovery
Grab it here : http://d-h.st/7di
You may have another problem ... how to flash this stock recovery.
Since you managed to fix the variant version problem, then I guess you have root in your ROM.
Unlock the bootloader with this guide : http://forum.xda-developers.com/showthread.php?t=2475914
see : to UNLOCK your bootloader,enter the following:
then fastboot flash the stock recovery
try again and see whether you have any error. The only one I can guess is your ROM may not have the preload files ... fix this one later if there is a problem. If no problem then everything should be good.
---------- Post added at 02:18 AM ---------- Previous post was at 01:52 AM ----------
Correct ... the stock recovery can be extracted from firmware.zip
And I think he may need files from /data/preload/
Click to expand...
Click to collapse
well, just did the update like normal after i flashed the stock recovery and everything went fine
Thanks, guys
TakChan said:
well, just did the update like normal after i flashed the stock recovery and everything went fine
Thanks, guys
Click to expand...
Click to collapse
Great :good::good:
ckpv5 said:
Great :good::good:
Click to expand...
Click to collapse
Not rooted Stock ROM 5.12.707.3, stock Recovery, S-OFF, relock bootloader but why I still cannot install OTA? After finishing download and verified the file, I got a message that I have modified firmware and the update fail. I have downloaded the OTA file from your link 6.13.707.1, what should I do next How to update manually?
wildanw2 said:
Not rooted Stock ROM 5.12.707.3, stock Recovery, S-OFF, relock bootloader but why I still cannot install OTA? After finishing download and verified the file, I got a message that I have modified firmware and the update fail. I have downloaded the OTA file from your link 6.13.707.1, what should I do next How to update manually?
Click to expand...
Click to collapse
Modified firmware = variant system version error
You can't update automatically or manually when you have this error
Check that you have CID HTC__044 and MID PN0714000
If no ... read a few post that mentioned before
Also note that "relock bootloader" is not necessary
ckpv5 said:
Modified firmware = variant system version error
You can't update automatically or manually when you have this error
Check that you have CID HTC__044 and MID PN0714000
If no ... read a few post that mentioned before
Also note that "relock bootloader" is not necessary
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: CID__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3912mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.376s
do I have to factory reset first? I have modified splash screen, Is it the cause?
Aah...I made a mistake in writing the CID. I have rewrite it into HTC_044, How to update manually?
wildanw2 said:
Aah...I made a mistake in writing the CID. I have rewrite it into HTC_044, How to update manually?
Click to expand...
Click to collapse
CID__044 is wrong and HTC_044 also wrong.
The correct one is HTC__044 (notice the double underscore)
To make thing easier why don't change it to SuperCID
fastboot oem writecid 11111111
(there 8 of 1)
I don't advise to manually update OTA, since you insist :
1. Put the OTA.zip on the root of sdcard
2. Boot to hboot and select recovery
3. press power + volume up to enter recovery
4. select install from phone storage
5. select 0 then select the OTA.zip
6. the system will install and it will ask you to reboot to flash firmware
7. reboot and let the system do its task
8. system will reboot and done
ckpv5 said:
To make thing easier why don't change it to SuperCID
fastboot oem writecid 11111111
(there 8 of 1)
Click to expand...
Click to collapse
Can we still get OTA and install it by using SuperCID?
Thank you, I updated my One successfully
Dear Xda team,
I recently unlocked my phone via HTC dev site and I also made a backup of stock and I decided to upgrade to Custom Rom Android revolution 81..0 and since then I have had issues, I wiped all datas and now I am left with NO OS. I also tried Android revolution google play edition, it successfully installed but unforuntately boot loops because of S-ON and I dont know TWRP compatibility issues. I am confused.
Ideally, I want to get back my STOCK make an adb back up of stock, Make it S-OFF and then try all custom ROMS. I need all possible help. I am also posting other device info.
***** TAMpered*****
*****Unlocked******
M7_UL PVT SHIP S- ON RH
HBOOT- 1.57.0000
RADIO- 4T.29.3218.08
OpenDSP- boot 2048 MB
Jul1 28 2014, 18:52:08.0
Above is HBOOT display info about the device. Please kindly help me and guide me with an easy step by step process.
Awaiting replies....Cheers in advance.
Bond114 said:
Dear Xda team,
I recently unlocked my phone via HTC dev site and I also made a backup of stock and I decided to upgrade to Custom Rom Android revolution 81..0 and since then I have had issues,
Click to expand...
Click to collapse
What version of twrp are you using? Use 2.6.3.3 to flash ARHD
Ideally, I want to get back my STOCK make an adb back up of stock, Make it S-OFF and then try all custom ROMS. I need all possible help. I am also posting other device info.
***** TAMpered*****
*****Unlocked******
M7_UL PVT SHIP S- ON RH
HBOOT- 1.57.0000
RADIO- 4T.29.3218.08
OpenDSP- boot 2048 MB
Jul1 28 2014, 18:52:08.0
Click to expand...
Click to collapse
Returning back to stock will probably require s-off first so you can flash a RUU with a lower version. Better to post a complete "fastboot getvar all" (remove emei and sn) so we can determine what is the best solution for you.
alray said:
What version of twrp are you using? Use 2.6.3.3 to flash ARHD
Returning back to stock will probably require s-off first so you can flash a RUU with a lower version. Better to post a complete "fastboot getvar all" (remove emei and sn) so we can determine what is the best solution for you.
Click to expand...
Click to collapse
Version is twrp-2.6.3.0 .
getvar all info
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.0
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4276mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s.....
hope this will give better picture....thanks for your prompt response.
Bond114 said:
Version is twrp-2.6.3.0 .
getvar all info
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.0
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: REMOVE!
(bootloader) imei: REMOVE!
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4276mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s.....
hope this will give better picture....thanks for your prompt response.
Click to expand...
Click to collapse
I'm 100% sure that TWRP 2.6.3.0 was the cause of your trouble when flashing ARHD. Flashing twrp 2.6.3.3 should resolve that issue
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
Your stock version is the pretty standard WWE version X.XX.401.X so it should not be difficult to find a nandroid backup of this version over here.
You can also just update the recovery to 2.6.3.3, flash arhd, s-off the phone. With s-off you'll be able to flash every rom you want including GPE and you'll also have the ability to use a RUU like 4.19.401.9 or 1.28.401.7 to restore your phone back to stock so your adb backup will not be required.
alray said:
I'm 100% sure that TWRP 2.6.3.0 was the cause of your trouble when flashing ARHD. Flashing twrp 2.6.3.3 should resolve that issue
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
Your stock version is the pretty standard WWE version X.XX.401.X so it should not be difficult to find a nandroid backup of this version over here.
You can also just update the recovery to 2.6.3.3, flash arhd, s-off the phone. With s-off you'll be able to flash every rom you want including GPE and you'll also have the ability to use a RUU like 4.19.401.9 or 1.28.401.7 to restore your phone back to stock so your adb backup will not be required.
Click to expand...
Click to collapse
U mean i should ARHD Google play edition or ARHD 81.0.... can u also post links for nandroid backup...thankx again.
Bond114 said:
U mean i should ARHD Google play edition or ARHD 81.0.... can u also post links for nandroid backup...thankx again.
Click to expand...
Click to collapse
I tried flashing 2.6.3.3 and stuck up ......screen says ' Entering Recovery...... no activity...help pls
Bond114 said:
U mean i should ARHD Google play edition or ARHD 81.0.... can u also post links for nandroid backup...thankx again.
Click to expand...
Click to collapse
flash arhd Sense version,
then s-off, (try firewater first, if you get the "whelp" message ---> Sunshine s-off.
then you are free to do whatever you want cause you have s-off.
---------- Post added at 10:47 AM ---------- Previous post was at 10:42 AM ----------
Bond114 said:
I tried flashing 2.6.3.3 and stuck up ......screen says ' Entering Recovery...... no activity...help pls
Click to expand...
Click to collapse
have you erased the cache and reboot the bootloader first?
alray said:
flash arhd Sense version,
then s-off, (try firewater first, if you get the "whelp" message ---> Sunshine s-off.
then you are free to do whatever you want cause you have s-off.
---------- Post added at 10:47 AM ---------- Previous post was at 10:42 AM ----------
have you erased the cache and reboot the bootloader first?
Click to expand...
Click to collapse
Yes i did it.... i just flashed ARHD successfully....Gr8
it worked...no words .....thanks a ton....it was a nightmare ...i have been at it for nearly 19 hours......
thanks bro....all i can say is thanks....
Bond114 said:
Yes i did it.... i just flashed ARHD successfully....Gr8
it worked...no words .....thanks a ton....it was a nightmare ...i have been at it for nearly 19 hours......
thanks bro....all i can say is thanks....
Click to expand...
Click to collapse
you're welcome glad it worked :highfive:
alray said:
you're welcome glad it worked :highfive:
Click to expand...
Click to collapse
Bro, I tries S-OFF firewater and also murmurunner. No result. It says my firmware has an antipatch. Sunshine is asking for money. Any solution to S-OFF without much fuss.
please let me know. cheers.
Bond114 said:
Bro, I tries S-OFF firewater and also murmurunner. No result. It says my firmware has an antipatch. Sunshine is asking for money. Any solution to S-OFF without much fuss.
please let me know. cheers.
Click to expand...
Click to collapse
Sunshine is your only hope