Problem to change rom - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Hi All,
i installed [Team Canjica] OmniROM 4.3 rom, but i want try other.
I have many problem to do this because TWRP version 2.6.3.0 can't mount sdcard and i can't see a new file zip (i have error when try to factory reset) also i have problem with root permission.
how can resolve this ?
thanks a lot

CyberTop86 said:
Hi All,
i installed [Team Canjica] OmniROM 4.3 rom, but i want try other.
I have many problem to do this because TWRP version 2.6.3.0 can't mount sdcard and i can't see a new file zip (i have error when try to factory reset) also i have problem with root permission.
how can resolve this ?
thanks a lot
Click to expand...
Click to collapse
Omni must be rooted again. It is not prerooted. And if you want to go to some rom before CM10.2 you must flash stock firmware with Odin. Because preload partifion is partitioned on other way than those roms use.
Sent from my GT-I9070 using Tapatalk

to make root work you need to flash this in recovery:
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip

shut_down said:
Omni must be rooted again. It is not prerooted. And if you want to go to some rom before CM10.2 you must flash stock firmware with Odin. Because preload partifion is partitioned on other way than those roms use.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Thanks for your help.
How can root it ?
i want to try this rom [Team Canjica] [WIP] CyanogenMod 11, how can do it ?
thank you

I think this is original android dev section....not Q&A

rodaven said:
to make root work you need to flash this in recovery:
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip
Click to expand...
Click to collapse
Sorry, but how can install it if i can't mount sdcard ?

CyberTop86 said:
Sorry, but how can install it if i can't mount sdcard ?
Click to expand...
Click to collapse
Repartition sd card. Another user had similiar problem lately, but that fixed it. Search How to repartition external sd card. Backup it before that, it will wipe data from it. And partition it in fat32.
Or you can install stock JB with Odin, and then install CM from stock recovery.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Repartition sd card. Another user had similiar problem lately, but that fixed it. Search How to repartition external sd card. Backup it before that, it will wipe data from it. And partition it in fat32.
Or you can install stock JB with Odin, and then install CM from stock recovery.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I try it but does not work :crying:

CyberTop86 said:
I try it but does not work :crying:
Click to expand...
Click to collapse
Than install stock firmware with Odin.
Sent from my GT-I9070 using Tapatalk

Related

[Q] Phone memory disappeared after installing custom ROM Avatar3.0

Hello,
I recently rooted my phone and flashed it with "PhilZ-cwm6 v5.00.4 with CWM 6.0.3.1 based recovery" and then flashed "Avatar ROM 3.0"
Before flashing ROM, i followed these steps:
1. Select ‘wipe data/factory reset’
2. Subsequently ‘wipe cache partition’
3. wipe dalvick
The installation completed succesfully and after reboot i face following problems:
1. Can't open gallery, camera, theme chooser etc as it says no external memory found.
I have a micro sd card of 2 GB and the internal phone memory is 8GB.
But in the storage i find this:
Internal storage
Total Space: 1.97GB
Available: 1.88GB
Internal Storage
SD Card
Total Space: 1.90 GB
Available: 149MB [As i have songs and other files in the card]
USB Storage
MOUNT SD Card
Insert an SD card for mounting [Cannot click on this option]
Please help as it was my first time that i flashed a ROM.
Flashed new ROM but still the same problem with memory
I tried flashing ParanoidAndroid ROM and then CM ROM but still the phone memory is not detected and hence cannot open gallery, camera....
Please help!!!!
After flashing these roms did you flash gapps?
Cm based roms do not include any Google apps such as play store, or anything, gapps includes these. You need to flash that first, then deal with your memory issue which I don't think you have.
Sent from my GT-N7000 using xda premium
yes i have installed gapps
SpyderTracks said:
After flashing these roms did you flash gapps?
Cm based roms do not include any Google apps such as play store, or anything, gapps includes these. You need to flash that first, then deal with your memory issue which I don't think you have.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes I have installed the compatible version of gapps and I can access these.
But my problem still lies with internal SD card (phone memory)
pratik069 said:
Yes I have installed the compatible version of gapps and I can access these.
But my problem still lies with internal SD card (phone memory)
Click to expand...
Click to collapse
Are you able to see your SD card and internal memory in a root explorer? Sometimes permissions can get messed up.
Sent from my GT-N7000 using xda premium
SD Card data not visible by ROOT Explorer
SpyderTracks said:
Are you able to see your SD card and internal memory in a root explorer? Sometimes permissions can get messed up.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hello SpyderTracks,
I tried to access sd card using Root browser as well as ES file explorer but the folder is empty. I can view the data of extsdCard.
One more thing i have noticed is when i'm in recovery mode and try to install new zip from sd card, I can see all the folders which my phone memory has. Why is it visible at that time?
Please Help its really urgent!!!
-Flash stock recovery
Check if it is fine
If Not
-Wipe cahce and data (Factory reset)on safe kernel
still as it is
-Flash ROM with 'PIT'
Hope after that there shouldn't have issue.
Edit :sorry op, i have just found it is for n7000, actually i have responded to your pm so couldn't make it is for note1. As now a days not visiting q/a section of note1.
Don't wipe on stock kernel.
dr.ketan said:
-Flash stock recovery
Check if it is fine
If Not
-Wipe cahce and data (Factory reset) with STOCK recovery
still as it is
-Flash ROM with 'PIT'
Hope after that there shouldn't have issue.
Click to expand...
Click to collapse
Dr. K, good to see ya
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Dr. K, good to see ya
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thank you
Your msg reminded me it is note1 thread.
Sent from my GT-N7100 using xda premium
dr.ketan said:
Thank you
Your msg reminded me it is note1 thread.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Lol, are you note 2 now?
Sent from my GT-N7000 using xda premium
Solved on flashing factory firmware
Thank you SpyderTracks and Dr. ketan. I got my phone working after flashing factory firmware. Thanks a ton.
pratik069 said:
Thank you SpyderTracks and Dr. ketan. I got my phone working after flashing factory firmware. Thanks a ton.
Click to expand...
Click to collapse
Good news, glad it's sorted.
Sent from my GT-N7000 using xda premium
Need your help please please
Dear Sir,
I have installed custom ROM SuperNexus 2.0 milestone 1 at my gt-n7000.. I have rooted my cellphone using Philtz 5.0 version with CWM 6.0.3 version..After successful completion of custom Rom, my cellphone is not showing file manager, or my internal and external memory is not detected.
After going to Storage option, it shows Mount your external card, but it not highlighted so unable to click it.
Other thing I want to tell you that before installing above custom ROM, I took the backup of my jelly bean 4.1.2 ( I had installed it using odin to upgrade from ICS) using Philtz 5.0.. and when I used to restore to 4.1.2 JB from SuperNexus due to facing above mentioned problem, gallery is missing and setting option is also missing..
Please please guide me..
I will be grateful to you.
Warm Regards
Please help.. I have same problwm
dr.ketan said:
-Flash stock recovery
Check if it is fine
If Not
-Wipe cahce and data (Factory reset)on safe kernel
still as it is
-Flash ROM with 'PIT'
Hope after that there shouldn't have issue.
Edit :sorry op, i have just found it is for n7000, actually i have responded to your pm so couldn't make it is for note1. As now a days not visiting q/a section of note1.
Don't wipe on stock kernel.
Click to expand...
Click to collapse
I have same problem.. But.. I dont understand thd flash aith PIT part and I dont have my stock recovery.. But im in latest philz recovery.. Any helps?
I recently rooted my phone and flashed with a custom ROM. Now my phn memory is disappeared. How can I sovle it?pls help me

[Q] Sd card won't mount in recovery

Hey guys i just rooted my friends galaxy using odin , i also installed superuser, downladed rom recovery manager , updated it , downloaded rom and google apps files and then from rom manager rebooted into recovery but sd card is not appearing! I also uninstalled rom manager and entered in recovery using volume up button but the same result, any suggestions?
DrGreem said:
Hey guys i just rooted my friends galaxy using odin , i also installed superuser, downladed rom recovery manager , updated it , downloaded rom and google apps files and then from rom manager rebooted into recovery but sd card is not appearing! I also uninstalled rom manager and entered in recovery using volume up button but the same result, any suggestions?
Click to expand...
Click to collapse
Is your sdcard mounted in the recovery options?
Sent from my GT-I9070 using xda app-developers app
Phoneboot said:
Is your sdcard mounted in the recovery options?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I don't know, how can i check that?
Go to recovery and see if your card is mounted.
DrGreem said:
Hey guys i just rooted my friends galaxy using odin , i also installed superuser, downladed rom recovery manager , updated it , downloaded rom and google apps files and then from rom manager rebooted into recovery but sd card is not appearing! I also uninstalled rom manager and entered in recovery using volume up button but the same result, any suggestions?
Click to expand...
Click to collapse
Search "repartition SD card" here on xda.
shut_down said:
Search "repartition SD card" here on xda.
Click to expand...
Click to collapse
hey guys when i press home button and volume down button this is the screen whitch appears, but in the recovery i only see phone memory.. ;/
Dafuq?
DrGreem said:
hey guys when i press home button and volume down button this is the screen whitch appears, but in the recovery i only see phone memory.. ;/
Dafuq?
Click to expand...
Click to collapse
1. That is stock recovery.
2. Root your phone, HOW: http://www.youtube.com/watch?v=jij-Bssni1s
3. Install CoCore HOW: Download it from here, unzip it and put kernel.bin.md5 to your phone (remeber where you put it). Use one with CWM, it is most similiar with stock one (that you do not get confused) Then install Universal kernel flash and ES File explorer. In Universal kernel flash thread is explanation how to use it, read it.
4. Reboot to recovery like you did (now it will not be stock one) and than you can install custom rom.
You can't install custom rom from stock recovery, that is why you need to do all this.
Dude the video you sent me has already costum recovery, i dont! And i rooted the phone already using this guide here http://www.androidrooting.com/how-to-root-samsung-galaxy-s-advance-i9070-gingerbread-2-3-6/
Ok i am flashing the kernel but the program crashes after 4 seconds of execution ;/
DrGreem said:
Dude the video you sent me has already costum recovery, i dont! And i rooted the phone already using this guide here http://www.androidrooting.com/how-to-root-samsung-galaxy-s-advance-i9070-gingerbread-2-3-6/
So shall i proceed to step 2 ?
Click to expand...
Click to collapse
Wait, that root method is for Gingerbread? You have GB?
If that is correct than install custom rom for gb only. Your solution is to repartition sd card. That's why you can't see it. I had the same problem, and I am telling you from my expirience. Search xda with "how to repartition sd card". Like I told you on my first post on this thread.
Послато са GT-I9070 користећи Тапаталк 4
shut_down said:
Wait, that root method is for Gingerbread? You have GB?
Послато са GT-I9070 користећи Тапаталк 4
Click to expand...
Click to collapse
Yes lol
Gingerbread
EDIT:
Finally flashed costum kernel entered in recovery and flashed cyanogen! thanks a lot for help
DrGreem said:
Yes lol
Gingerbread
EDIT:
Finally flashed costum kernel entered in recovery and flashed cyanogen! thanks a lot for help
Click to expand...
Click to collapse
Just to know, now if you want to go back to gb you can't just flash fw from sammobile. You need to use guide for going back to gb.
Послато са GT-I9070 користећи Тапаталк 4
shut_down said:
Just to know, now if you want to go back to gb you can't just flash fw from sammobile. You need to use guide for going back to gb.
Послато са GT-I9070 користећи Тапаталк 4
Click to expand...
Click to collapse
So everything seemed ok i flashed cyanogen 10.1 but sim card would't work so i flashed jetmod but nothing happens after booting i mean i stucks in the samsung galaxy screen so i tried reflash cyanogen but i get the following error.. Any suggestions??? :S
DrGreem said:
So everything seemed ok i flashed cyanogen 10.1 but sim card would't work so i flashed jetmod but nothing happens after booting i mean i stucks in the samsung galaxy screen so i tried reflash cyanogen but i get the following error.. Any suggestions??? :S
Click to expand...
Click to collapse
Yes. For begining would you read my post that you just quoted. JetMOD is GB ROM. You can't just install GB ROM over CM. You can't even install JB ROM over CM (you need to change kernel first).
For JetMOD downgrade to GB, root and install custom recovery and than JetMOD.
http://forum.xda-developers.com/showthread.php?t=2100642
If you want to be on JB still, then download your firmware from sammobile.com and flash it with Odin. http://forum.xda-developers.com/showthread.php?t=1985398
Do you have I9070P??? If you do do not install non P firmware, you will HARD BRICK PHONE!!! That error 7 was shown because you used wrong version of CM, if you have P than you should download for P.
P.S. Your sim card will work if you do FACTORY RESET. It should be always done on every ROM change.
shut_down said:
Yes. For begining would you read my post that you just quoted. JetMOD is GB ROM. You can't just install GB ROM over CM. You can't even install JB ROM over CM (you need to change kernel first).
For JetMOD downgrade to GB, root and install custom recovery and than JetMOD.
http://forum.xda-developers.com/showthread.php?t=2100642
If you want to be on JB still, then download your firmware from sammobile.com and flash it with Odin. http://forum.xda-developers.com/showthread.php?t=1985398
Do you have I9070P??? If you do do not install non P firmware, you will HARD BRICK PHONE!!! That error 7 was shown because you used wrong version of CM, if you have P than you should download for P.
P.S. Your sim card will work if you do FACTORY RESET. It should be always done on every ROM change.
Click to expand...
Click to collapse
Ok so now im downloading firmware from sammobile, then i just flash it using odin right?
EDIT ok i installed stock firmware and everything is ok, thanks again

CWM Restore

Hello!
I have installed Cocore kernell (8.2 and 8.6.4) a few times in my stock JB rom (LQL) but when I install CM 10.2 and if i need to go back to my stock rom i tried to restore my backup made it with the CWM that comes with cocore, it's pass without problems but when the rom start, stop a lot of process making impossible to work in it, and start in configuration wizard
someone have the same problem, there is a way to fix it?
Thanks in advance guys!!!
If you are on Android 4.3 after restoring your backup you need to reboot to recovery (recovery will change as you are on Cocore kernel) and then => format preload, then reboot, should work fine
Sent from Italy using Tapatalk
T.M. said:
someone have the same problem, there is a way to fix it?
Click to expand...
Click to collapse
From @Paul L. quote:
Paul L. said:
Format /preload as ext4
download the cocore TWRP kernel, install it, (re-)reboot to recovery, go to advanced (on TWRP, yes, it needs to be TWRP), terminal command, press enter (to select the directory to work from, which should be "/"), and run
make_ext4fs /dev/block/mmcblk0p9
(DANGER: IF YOU FORMAT WHATEVER ELSE IT MAY BRICK YOUR DEVICE, just check that our /dev/block/mmcblk0p9 is 0p9 at the end, it CAN'T BE ANYTHING ELSE.)
Then, go back and onto mount menu, and mount /preload partition. And then just install whatever ROM you want.
I am saying this because re-installing the stock ROM from ODIN can be dangerous if the power it's cut out or the USB is suddenly disconnected. Just format preload partition (there is nothing critical there, so it's safe, or safer than ODIN that's it)
Click to expand...
Click to collapse
R_a_z_v_a_n said:
From @Paul L. quote:
Click to expand...
Click to collapse
Yeah, I noticed it but it's actually not necessary
Sent from Italy using Tapatalk
Thanks mates!
Toni5830 said:
If you are on Android 4.3 after restoring your backup you need to reboot to recovery (recovery will change as you are on Cocore kernel) and then => format preload, then reboot, should work fine
Sent from Italy using Tapatalk
Click to expand...
Click to collapse
Is this valid for 4.4? thanks in advance and sorry my poor English:good:
raan4 said:
Is this valid for 4.4? thanks in advance and sorry my poor English:good:
Click to expand...
Click to collapse
Ehm, I don't know
Sent from Italy using Tapatalk
raan4 said:
Is this valid for 4.4? thanks in advance and sorry my poor English:good:
Click to expand...
Click to collapse
Yes, since some version of CM10.2 TeamJanice uses preload partition for swap. So it must be formated, if that do not work - flash stock JB.
shut_down said:
Yes, since some version of CM10.2 TeamJanice uses preload partition for swap. So it must be formated, if that do not work - flash stock JB.
Click to expand...
Click to collapse
Thanks for your attention
I have a question
Then the steps to back to stock rom would be:
1-recovery (cwm)
2-format preload
3 restore stock
?????
Thanks in advance and sorry my poor English
raan4 said:
Thanks for your attention
I have a question
Then the steps to back to stock rom would be:
1-recovery (cwm)
2-format preload
3 restore stock
?????
Thanks in advance and sorry my poor English
Click to expand...
Click to collapse
You can go back like that, or you can flash stock fb, root, install cocore and restore your backup (if you want to go back to your backup).
Послато са GT-I9070 уз помоћ Тапатока
so basically you need the CWM?
if so here you go HERE
br4infreze said:
so basically you need the CWM?
if so here you go HERE
Click to expand...
Click to collapse
No, he already have it on CM10.2. He need to repartition /preload partition.
shut_down said:
No, he already have it on CM10.2. He need to repartition /preload partition.
Click to expand...
Click to collapse
ohhhh

[CWM][DEV] ClockWorkMod 6.0.1.2 - BroadcomCM [COOPERVE]

CLOCKWORKMOD RECOVERY 6.0.1.2
Click to expand...
Click to collapse
This is the CWM recovery found on the latest CM9 sources.
INSTALLATION
Click to expand...
Click to collapse
Download the update.zip found here
Place it on your SD card
Flash it on your actual recovery (doesn't matter if it's stock one)
USAGE
Click to expand...
Click to collapse
Press home + volume up + home button to enter
Our sources can be found on BroadcomCM Github
reserved
Wow ..well done ..
Sent from my GT-S5830i using Tapatalk 2
Wondered.....nice work bro....:thumbup::beer:
Send from Tapatalk 2
When I tried to wipe cache with this version, my phone stopped detecting the cache partition :/ Doing it again with version 5 put it back to normal,, but yeah.
Sent from my HP Pavilion g6 Notebook PC using Tapatalk
Sorry for english.
Bug: If i unmount /system and i can mount this again. Error: Error mounting /system
This problem is and with /data and /cache..
With /sdcard work good.
Other problem is..i can mount /sd-ext ..i have ext3 partition.
I can try to make backup (for testing) because i can remount /data /system /cache..
Prob with "STATUS 7"
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Cool vats said:
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Click to expand...
Click to collapse
cn u xplane properly
i cnt getit..
if ur getting problem with cmw
then
Flash via odin
In PDA section
https://docs.google.com/file/d/0BzmTivDo1WcYTmp1N0hibG9UMTg/preview?pli=1
hit thnx if i help u
Sent from my GT-S5830i using Tapatalk 2
Here is the Solution!!
Cool vats said:
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Click to expand...
Click to collapse
Flash via odin
In PDA section :good:Download it from attached files!!
https://docs.google.com/file/d/0BzmT.../preview?pli=1
NOTE!! Flash in PDA Section only!!
:victory:
Cool vats said:
Flash via odin
In PDA section :good:Download it from attached files!!
https://docs.google.com/file/d/0BzmT.../preview?pli=1
NOTE!! Flash in PDA Section only!!
:victory:
Click to expand...
Click to collapse
exactly what i said in previous post
:silly:
Hit thnks if i help you
Sent from my GT-S5830i using Tapatalk
dj88 said:
exactly what i said in previous post
:silly:
Hit thnks if i help you
Sent from my GT-S5830i using Tapatalk
Click to expand...
Click to collapse
I think he even copied your link LOL.
No, Bt i kw from whre you people get this..
Dont act smart!!
Sent from my GT-S5830i using Tapatalk 2
Cool vats said:
No, Bt i kw from whre you people get this..
Dont act smart!!
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I didn't said that
just shared link..
Hitesh2626 said:
I think he even copied your link LOL.
Click to expand...
Click to collapse
lol
Installation problem
Hi everyone
A friend gave me a S5839i and I tried to install cwm a hundred times, and It was completely impossible. I access to the stock recovery, apply the update from sd card and after selecting the approppiate file cwm appears on screen, but when you access again to recovery, goes to stock one. ¿Anybody can help me?
Thanks in advance
miguelagarcia2 said:
Hi everyone
A friend gave me a S5839i and I tried to install cwm a hundred times, and It was completely impossible. I access to the stock recovery, apply the update from sd card and after selecting the approppiate file cwm appears on screen, but when you access again to recovery, goes to stock one. ¿Anybody can help me?
Thanks in advance
Click to expand...
Click to collapse
What kernel your use? On Raphael Kernel you cannot replace CWM without flash with odin (boot.img)
il3gal said:
What kernel your use? On Raphael Kernel you cannot replace CWM without flash with odin (boot.img)
Click to expand...
Click to collapse
It is stock, I'm triying to flash another rom
Enviado desde mi GT-I8190N mediante Tapatalk
Getting Status 0 error while installing cm-11 from your link with this CWM 6.0.1.2
I don't know but how i have the CWM 6.0.1.2 as default after trying lot of things and my phone directly boots to 6..0.1.2 instead of stock recovery.
Please help how to install CM-11. Even CM-10 will do but not sure how to get the working build with my above CWM.
kingsdeb said:
Getting Status 0 error while installing cm-11 from your link with this CWM 6.0.1.2
I don't know but how i have the CWM 6.0.1.2 as default after trying lot of things and my phone directly boots to 6..0.1.2 instead of stock recovery.
Please help how to install CM-11. Even CM-10 will do but not sure how to get the working build with my above CWM.
Click to expand...
Click to collapse
MTD build does not required a oldest recovery. Find CWM 6.0.5.3 at Discussion thread. Restore back to stock and flash again. Well, it should be work for now.
RevolutionBolt said:
MTD build does not required a oldest recovery. Find CWM 6.0.5.3 at Discussion thread. Restore back to stock and flash again. Well, it should be work for now.
Click to expand...
Click to collapse
How to restore back to stock recovery ? I have some 6.0.5.3 CWM as well but not working. A little more explanation will help.
kingsdeb said:
How to restore back to stock recovery ? I have some 6.0.5.3 CWM as well but not working. A little more explanation will help.
Click to expand...
Click to collapse
Well, to get to stock recovery, download XXLK1 firmware anywhere. And restore with Odin. Make sure you put files in right places. And install back CM11 with latest nightly with CWM 6.0.5.3. It should work for now. You'll be fine after install but don't forget install Galaxy Y MODEM after installed CM11. It's bug on our CM11 if you don't install, we can't boot without install it. If you know this already, just leave it.

Format /system

Hi!
If I format /system after installed Maclaw ROM, what will happen?
I want to install GApps, but I couldn't, because I haven't got enought space. (~240mb, and I have ~200mb)
Gun22 said:
Hi!
If I format /system after installed Maclaw ROM, what will happen?
I want to install GApps, but I couldn't, because I haven't got enought space. (~240mb, and I have ~200mb)
Click to expand...
Click to collapse
You will not have system. Phone will be stuck in Samsung logo at the boot until you install ROM or flash firmware again. Look for mini gapps, it is not hard to find it on Xda.
So if I format /system in recovery, I must istall rom again?
Gun22 said:
So if I format /system in recovery, I must istall rom again?
Click to expand...
Click to collapse
Yes, of course. Unless you're tired of using your device's.
783
It cause any error/fault?
Gun22 said:
It cause any error/fault?
Click to expand...
Click to collapse
Nope, read well what @shut_down said...
Inviato dal mio GT-I9505
If I have now 4.4.4, and format /system, I must install again 4.1.2, then install 4.4.4 or just 4.4.4?
Gun22 said:
If I have now 4.4.4, and format /system, I must install again 4.1.2, then install 4.4.4 or just 4.4.4?
Click to expand...
Click to collapse
You can install 4.4.4 again.
BUT THERE IS NO POINT OF FORMATING SYSTEM PARTITION FOR WHAT YOU NEED, YOU CAN'T GET THAT GAPPS INSTALLED THAT WAY.
Use Mini gapps from here: http://forum.xda-developers.com/showthread.php?t=2397942

Categories

Resources