CWM Restore - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Hello!
I have installed Cocore kernell (8.2 and 8.6.4) a few times in my stock JB rom (LQL) but when I install CM 10.2 and if i need to go back to my stock rom i tried to restore my backup made it with the CWM that comes with cocore, it's pass without problems but when the rom start, stop a lot of process making impossible to work in it, and start in configuration wizard
someone have the same problem, there is a way to fix it?
Thanks in advance guys!!!

If you are on Android 4.3 after restoring your backup you need to reboot to recovery (recovery will change as you are on Cocore kernel) and then => format preload, then reboot, should work fine
Sent from Italy using Tapatalk

T.M. said:
someone have the same problem, there is a way to fix it?
Click to expand...
Click to collapse
From @Paul L. quote:
Paul L. said:
Format /preload as ext4
download the cocore TWRP kernel, install it, (re-)reboot to recovery, go to advanced (on TWRP, yes, it needs to be TWRP), terminal command, press enter (to select the directory to work from, which should be "/"), and run
make_ext4fs /dev/block/mmcblk0p9
(DANGER: IF YOU FORMAT WHATEVER ELSE IT MAY BRICK YOUR DEVICE, just check that our /dev/block/mmcblk0p9 is 0p9 at the end, it CAN'T BE ANYTHING ELSE.)
Then, go back and onto mount menu, and mount /preload partition. And then just install whatever ROM you want.
I am saying this because re-installing the stock ROM from ODIN can be dangerous if the power it's cut out or the USB is suddenly disconnected. Just format preload partition (there is nothing critical there, so it's safe, or safer than ODIN that's it)
Click to expand...
Click to collapse

R_a_z_v_a_n said:
From @Paul L. quote:
Click to expand...
Click to collapse
Yeah, I noticed it but it's actually not necessary
Sent from Italy using Tapatalk

Thanks mates!

Toni5830 said:
If you are on Android 4.3 after restoring your backup you need to reboot to recovery (recovery will change as you are on Cocore kernel) and then => format preload, then reboot, should work fine
Sent from Italy using Tapatalk
Click to expand...
Click to collapse
Is this valid for 4.4? thanks in advance and sorry my poor English:good:

raan4 said:
Is this valid for 4.4? thanks in advance and sorry my poor English:good:
Click to expand...
Click to collapse
Ehm, I don't know
Sent from Italy using Tapatalk

raan4 said:
Is this valid for 4.4? thanks in advance and sorry my poor English:good:
Click to expand...
Click to collapse
Yes, since some version of CM10.2 TeamJanice uses preload partition for swap. So it must be formated, if that do not work - flash stock JB.

shut_down said:
Yes, since some version of CM10.2 TeamJanice uses preload partition for swap. So it must be formated, if that do not work - flash stock JB.
Click to expand...
Click to collapse
Thanks for your attention
I have a question
Then the steps to back to stock rom would be:
1-recovery (cwm)
2-format preload
3 restore stock
?????
Thanks in advance and sorry my poor English

raan4 said:
Thanks for your attention
I have a question
Then the steps to back to stock rom would be:
1-recovery (cwm)
2-format preload
3 restore stock
?????
Thanks in advance and sorry my poor English
Click to expand...
Click to collapse
You can go back like that, or you can flash stock fb, root, install cocore and restore your backup (if you want to go back to your backup).
Послато са GT-I9070 уз помоћ Тапатока

so basically you need the CWM?
if so here you go HERE

br4infreze said:
so basically you need the CWM?
if so here you go HERE
Click to expand...
Click to collapse
No, he already have it on CM10.2. He need to repartition /preload partition.

shut_down said:
No, he already have it on CM10.2. He need to repartition /preload partition.
Click to expand...
Click to collapse
ohhhh

Related

Prob:Restoring nandroid stock rom backup

Hey guys im using miracle v4 (cm7)
But now i want to revert to stock rom...
I tried to restored backup of original stock rom via nandroid (cwm) but my ace got stucked on logo
..
Can someone pls give a step by step guide on how to restore it only via cwm (not odin)?
Please
If you used the search button you would have found the answer. In a nutshell, cm7 and stock use different file systems so you cannot use can to revert. Either change file system or use Odin......
Sent from my GT-N7000
PJ147 said:
If you used the search button you would have found the answer. In a nutshell, cm7 and stock use different file systems so you cannot use can to revert. Either change file system or use Odin......
Sent from my GT-N7000
Click to expand...
Click to collapse
I searched a lot dude but couldnt found an exact solution on how to change file system ..
manishpatil said:
I searched a lot dude but couldnt found an exact solution on how to change file system ..
Click to expand...
Click to collapse
Did you wipe everything before restore (including /system) ?
This was sent from a Galaxy Ace. Problem?
EmoBoiix3 said:
Did you wipe everything before restore (including /system) ?
This was sent from a Galaxy Ace. Problem?
Click to expand...
Click to collapse
Ya i did that .! Is it right ? Or i should nt have done that?
manishpatil said:
Ya i did that .! Is it right ? Or i should nt have done that?
Click to expand...
Click to collapse
Then that's weird . It's impossible to make a backup of an rfs filesystem
This was sent from a Galaxy Ace. Problem?
Well same problem here. "You can't restore a rfs based partition backup on ext based partition."
You have to flash with odin to go back to Stock.
Or try this, i'm not sure if it'll work:
Download "ext4 manager" app by cf-root team> then convert filesystem to rfs> Restore backup after that.
Hope it'll work
1. Flash original firmware with Odin.
2. Install CWM recovery.
3. Restore original firmware backup.
It's the easiest way and it worked for me.
abhibnl said:
Well same problem here. "You can't restore a rfs based partition backup on ext based partition."
You have to flash with odin to go back to Stock.
Or try this, i'm not sure if it'll work:
Download "ext4 manager" app by cf-root team> then convert filesystem to rfs> Restore backup after that.
Hope it'll work
Click to expand...
Click to collapse
Where could i get this ext4 manager n cf root kernl... ?
epint said:
1. Flash original firmware with Odin.
2. Install CWM recovery.
3. Restore original firmware backup.
It's the easiest way and it worked for me.
Click to expand...
Click to collapse
Use this method bro. Let odin change filesystem to rfs.
Sent from my GT-S5830 using Tapatalk 2
Odin backup a stock ROM use cfroot, after that I can use cwm to restore it
Sent from my HTC Explorer using XDA
manishpatil said:
Where could i get this ext4 manager n cf root kernl... ?
Click to expand...
Click to collapse
Google dude. Search for ext4 manager apk, download app, put in system/app, set permission and there you go
Thanks guys i sorted out my problem..
manishpatil said:
Thanks guys i sorted out my problem..
Click to expand...
Click to collapse
mind elaborating how?
abhibnl said:
mind elaborating how?
Click to expand...
Click to collapse
First of all i flashed sgsII v.7.2 then it has ext4manger inbuilt..
Through that i converted system into rfs .. and then tried to restore the backup of stock rom i made earlier.... it was successfull
manishpatil said:
First of all i flashed sgsII v.7.2 then it has ext4manger inbuilt..
Through that i converted system into rfs .. and then tried to restore the backup of stock rom i made earlier.... it was successfull
Click to expand...
Click to collapse
Well told ya that method already. Nice to see it worked
manishpatil said:
Thanks guys i sorted out my problem..
Click to expand...
Click to collapse
can u post the link for downloading ext4 manager

Problem to change rom

Hi All,
i installed [Team Canjica] OmniROM 4.3 rom, but i want try other.
I have many problem to do this because TWRP version 2.6.3.0 can't mount sdcard and i can't see a new file zip (i have error when try to factory reset) also i have problem with root permission.
how can resolve this ?
thanks a lot
CyberTop86 said:
Hi All,
i installed [Team Canjica] OmniROM 4.3 rom, but i want try other.
I have many problem to do this because TWRP version 2.6.3.0 can't mount sdcard and i can't see a new file zip (i have error when try to factory reset) also i have problem with root permission.
how can resolve this ?
thanks a lot
Click to expand...
Click to collapse
Omni must be rooted again. It is not prerooted. And if you want to go to some rom before CM10.2 you must flash stock firmware with Odin. Because preload partifion is partitioned on other way than those roms use.
Sent from my GT-I9070 using Tapatalk
to make root work you need to flash this in recovery:
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip
shut_down said:
Omni must be rooted again. It is not prerooted. And if you want to go to some rom before CM10.2 you must flash stock firmware with Odin. Because preload partifion is partitioned on other way than those roms use.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Thanks for your help.
How can root it ?
i want to try this rom [Team Canjica] [WIP] CyanogenMod 11, how can do it ?
thank you
I think this is original android dev section....not Q&A
rodaven said:
to make root work you need to flash this in recovery:
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip
Click to expand...
Click to collapse
Sorry, but how can install it if i can't mount sdcard ?
CyberTop86 said:
Sorry, but how can install it if i can't mount sdcard ?
Click to expand...
Click to collapse
Repartition sd card. Another user had similiar problem lately, but that fixed it. Search How to repartition external sd card. Backup it before that, it will wipe data from it. And partition it in fat32.
Or you can install stock JB with Odin, and then install CM from stock recovery.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Repartition sd card. Another user had similiar problem lately, but that fixed it. Search How to repartition external sd card. Backup it before that, it will wipe data from it. And partition it in fat32.
Or you can install stock JB with Odin, and then install CM from stock recovery.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I try it but does not work :crying:
CyberTop86 said:
I try it but does not work :crying:
Click to expand...
Click to collapse
Than install stock firmware with Odin.
Sent from my GT-I9070 using Tapatalk

[q] plzz help guys

I take NANDROID backup yeseterday of harshjelly rom (with cocore kernel). now i m on jelly bean stock (rooted), jelly bean stock lagging hanging on rooted also so i m decided to restore my harshjelly nandroid backup, my question is when i restored can It get bootloop ??????? plzz tell???
becoz of cocore kernel it get bootloop or stuck?????
Sorry for my bad english
What you can do is flash cocore kernel and then restore nandroid backup. You won't end up in a bootloop.
archies20 said:
becoz of cocore kernel it get bootloop or stuck?????
Click to expand...
Click to collapse
szzlgupta said:
What you can do is flash cocore kernel and then restore nandroid backup. You won't end up in a bootloop.
Click to expand...
Click to collapse
Is it right that says @szzlgupta, in addition if you happen to get bootloop, go into recovery and do Wipe Cache and Dalvik, and everything got be just fine. :good:
NANDROID can backup cocore kernel or not????
archies20 said:
NANDROID can backup cocore kernel or not????
Click to expand...
Click to collapse
i think not., it just backs up phones system.
Flash cocore kernel and restore the backup
archies20 said:
NANDROID can backup cocore kernel or not????
Click to expand...
Click to collapse
szzlgupta said:
i think not., it just backs up phones system.
Flash cocore kernel and restore the backup
Click to expand...
Click to collapse
The Nandroid Backup is a snapshot of your device (it means everything on your phone – your apps, data, your current ROM and even the kernel is backed up) at the time you do the back up. If you restore the back up, it changes your phone BACK to that state. You will need custom recovery (CWM/TWRP). So make sure you have CWM or TWRP on your device.
http://forum.xda-developers.com/showthread.php?t=2190211
R_a_z_v_a_n said:
The Nandroid Backup is a snapshot of your device (it means everything on your phone – your apps, data, your current ROM and even the kernel is backed up) at the time you do the back up. If you restore the back up, it changes your phone BACK to that state. You will need custom recovery (CWM/TWRP). So make sure you have CWM or TWRP on your device.
http://forum.xda-developers.com/showthread.php?t=2190211
Click to expand...
Click to collapse
At the restored time can temporary CWM help to restored nandroid backup????
i mean can i use temporary CWM for restoring nandroid backup???
archies20 said:
At the restored time can temporary CWM help to restored nandroid backup????
Click to expand...
Click to collapse
Yes.
szzlgupta said:
i think not., it just backs up phones system.
Flash cocore kernel and restore the backup
Click to expand...
Click to collapse
R_a_z_v_a_n said:
The Nandroid Backup is a snapshot of your device (it means everything on your phone – your apps, data, your current ROM and even the kernel is backed up) at the time you do the back up. If you restore the back up, it changes your phone BACK to that state. You will need custom recovery (CWM/TWRP). So make sure you have CWM or TWRP on your device.
http://forum.xda-developers.com/showthread.php?t=2190211
Click to expand...
Click to collapse
Oh sorry
archies20 said:
K guys thanks for reply's :laugh: :good:
Click to expand...
Click to collapse
Simply press THANKS button, without posting thanks to those who help you. :highfive:
I´ve got the same problem and another possibility is after restore via odin you can root and open up update.zip for cwm or twrp recovery.I prefer Cwm..Then flash cocore kernel e/ep 8.0 or 8.2 higher is not recommended,because you can get into trouble like bootlop.
After flashing wipe/format user data wipe cache and dalvik:fingers-crossed:
reboot...pass
If you want to use cocore 8.6 you can flash from now via recovery menue
nandroid can backuped /preload partition. ????? if not It will bootloop i think?? @R_a_z_v_a_n
archies20 said:
nandroid can backuped /preload partition. ????? if not It will bootloop i think?? @R_a_z_v_a_n
Click to expand...
Click to collapse
You shouldn't get a bootloop when you do nandroid backup restore. Just when you do it from CM10.2 and CM11 it will get a bootloop because of preload partition.
shut_down said:
You shouldn't get a bootloop when you do nandroid backup restore. Just when you do it from CM10.2 and CM11 it will get a bootloop because of preload partition.
Click to expand...
Click to collapse
I am on harshjelly rom (update 5) and cocore kernel 8.6 can it will get bootloop???
archies20 said:
I am on harshjelly rom (update 5) and cocore kernel 8.6 can it will get bootloop???
Click to expand...
Click to collapse
I did lot of nandroid restores, and if backup is not corrupted I never had a bootloop. Even if you get one, you can do wipe cache, wipe dalvik cache, if that do not help do factory reset. And still if that do not help - flash stock JB firmware with Odin.
Послато са GT-I9070 уз помоћ Тапатока
shut_down said:
I did lot of nandroid restores, and if backup is not corrupted I never had a bootloop. Even if you get one, you can do wipe cache, wipe dalvik cache, if that do not help do factory reset. And still if that do not help - flash stock JB firmware with Odin.
Послато са GT-I9070 уз помоћ Тапатока
Click to expand...
Click to collapse
how to find out backup are corrupted or not???
archies20 said:
I am on harshjelly rom (update 5) and cocore kernel 8.6 can it will get bootloop???
Click to expand...
Click to collapse
First of all you must flash a lower kernel like cocore 8.0 or 8.2 .Wipe dalvik cache and format.Then flash version harshjelly 1 (reboot to generate dalvik cache) and after that (update5).reboot.
Now you can go into recovery and flash 8.6 or 8.8 but right now the harsh jelly tweaker isn´t working so well.
Happymaker said:
First of all you must flash a lower kernel like cocore 8.0 or 8.2 .Wipe dalvik cache and format.Then flash version harshjelly 1 (reboot to generate dalvik cache) and after that (update5).reboot.
Now you can go into recovery and flash 8.6 or 8.8 but right now the harsh jelly tweaker isn´t working so well.
Click to expand...
Click to collapse
i know how to flash i m asking about restored -_-
archies20 said:
how to find out backup are corrupted or not???
Click to expand...
Click to collapse
You will know when you fail to recover. But it will not happen 99%.
archies20 said:
how to find out backup are corrupted or not???
Click to expand...
Click to collapse
Your backup is corrupt only if you removed/played with some of it's files and you deleted it.
If it's intact as made, ​​he can be corrupt.

[Q] Help, My I9000 Cannot mount system and data even after flashing stock Firmware.

Hello to All,
I was on Stock JVU firmware non rooted, After getting Battery discharge, I charge the phone and power on it since than My phone got FC of all apps, so I decided to flash again stock firmware as per standard flashing guide. but My phone got booted but does not appears any apps even Touchwiz launcher also and getting FC. Also all previous apps does not wipe out and getting Force closes.
My I9000 Cannot mount system and data even after flashing stock Firmware in recovery.
Any good solutions are welcome.
hemal_4404 said:
Hello to All,
I was on Stock JVU firmware non rooted, After getting Battery discharge, I charge the phone and power on it since than My phone got FC of all apps, so I decided to flash again stock firmware as per standard flashing guide. but My phone got booted but does not appears any apps even Touchwiz launcher also and getting FC. Also all previous apps does not wipe out and getting Force closes.
My I9000 Cannot mount system and data even after flashing stock Firmware in recovery.
Any good solutions are welcome.
Click to expand...
Click to collapse
What do you mean it doesn't mount? When you boot or when you get into recovery?
Gokulbalram said:
What do you mean it doesn't mount? When you boot or when you get into recovery?
Click to expand...
Click to collapse
When I boot my phone.
Sent from my GT-I9300 using XDA Premium 4 mobile app
hemal_4404 said:
When I boot my phone.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If /system doesn't mount at boot, It'd be stuck at Kernel Image
Gokulbalram said:
If /system doesn't mount at boot, It'd be stuck at Kernel Image
Click to expand...
Click to collapse
So now what should I do for that Dear ?
hemal_4404 said:
So now what should I do for that Dear ?
Click to expand...
Click to collapse
You said that your phone boots and apps FC. Also, have you tried Repartitioning via Odin/Heimdall? (You'll ned a PIT file)
Gokulbalram said:
You said that your phone boots and apps FC. Also, have you tried Repartitioning via Odin/Heimdall? (You'll ned a PIT file)
Click to expand...
Click to collapse
yes i tried with odin with 512 MB PIT file.
hemal_4404 said:
yes i tried with odin with 512 MB PIT file.
Click to expand...
Click to collapse
Try this, Flash Stock with Repartitioning ticked. Flash the Root kernel, wipe /system and /data then flash your ROM
Gokulbalram said:
Try this, Flash Stock with Repartitioning ticked. Flash the Root kernel, wipe /system and /data then flash your ROM
Click to expand...
Click to collapse
After flashing stock should I allow to reboot ?
hemal_4404 said:
After flashing stock should I allow to reboot ?
Click to expand...
Click to collapse
Yeah.
Gokulbalram said:
Yeah.
Click to expand...
Click to collapse
done as mentioned by you but no difference....
custom rom booted and started but giving force closes of all prevoisly installed apps and also showing previous apps in launcher.
hemal_4404 said:
done as mentioned by you but no difference....
Custom rom booted and started but giving force closes of all prevoisly installed apps and also showing previous apps in launcher.
Click to expand...
Click to collapse
you didn't wipe data!!!!!!!
Gokulbalram said:
you didn't wipe data!!!!!!!
Click to expand...
Click to collapse
offcource did...
hemal_4404 said:
offcource did...
Click to expand...
Click to collapse
No you didn't, that's why the FC and Previous Apps. Try rebooting into recovery, wipe /system, /data, /cache, /datadata (if it's shown) and then flash the ROM
Gokulbalram said:
No you didn't, that's why the FC and Previous Apps. Try rebooting into recovery, wipe /system, /data, /cache, /datadata (if it's shown) and then flash the ROM
Click to expand...
Click to collapse
ok one more try giving.
hemal_4404 said:
ok one more try giving.
Click to expand...
Click to collapse
sorry dear again same happens, phone booted with custom rom but giving FC with prevoiusly installed apps.
One more thing my internal SD card is not able to unmount in Recovery, so that I can format that also but not able to format internal SD card.
Try clearing init.d if you can
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
Gokulbalram said:
Try clearing init.d if you can
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
Click to expand...
Click to collapse
Sorry Dear for being late reply, I don't know hot to clear init.d, Can you explain ?
hemal_4404 said:
Sorry Dear for being late reply, I don't know hot to clear init.d, Can you explain ?
Click to expand...
Click to collapse
Stop calking me dear, I feel uncomfortable. Init.d can be cleared via advanced in recovery mode
PFFFFFFFFFFFFFFFFTTT, sent from my i9000

[CWM][DEV] ClockWorkMod 6.0.1.2 - BroadcomCM [COOPERVE]

CLOCKWORKMOD RECOVERY 6.0.1.2
Click to expand...
Click to collapse
This is the CWM recovery found on the latest CM9 sources.
INSTALLATION
Click to expand...
Click to collapse
Download the update.zip found here
Place it on your SD card
Flash it on your actual recovery (doesn't matter if it's stock one)
USAGE
Click to expand...
Click to collapse
Press home + volume up + home button to enter
Our sources can be found on BroadcomCM Github
reserved
Wow ..well done ..
Sent from my GT-S5830i using Tapatalk 2
Wondered.....nice work bro....:thumbup::beer:
Send from Tapatalk 2
When I tried to wipe cache with this version, my phone stopped detecting the cache partition :/ Doing it again with version 5 put it back to normal,, but yeah.
Sent from my HP Pavilion g6 Notebook PC using Tapatalk
Sorry for english.
Bug: If i unmount /system and i can mount this again. Error: Error mounting /system
This problem is and with /data and /cache..
With /sdcard work good.
Other problem is..i can mount /sd-ext ..i have ext3 partition.
I can try to make backup (for testing) because i can remount /data /system /cache..
Prob with "STATUS 7"
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Cool vats said:
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Click to expand...
Click to collapse
cn u xplane properly
i cnt getit..
if ur getting problem with cmw
then
Flash via odin
In PDA section
https://docs.google.com/file/d/0BzmTivDo1WcYTmp1N0hibG9UMTg/preview?pli=1
hit thnx if i help u
Sent from my GT-S5830i using Tapatalk 2
Here is the Solution!!
Cool vats said:
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Click to expand...
Click to collapse
Flash via odin
In PDA section :good:Download it from attached files!!
https://docs.google.com/file/d/0BzmT.../preview?pli=1
NOTE!! Flash in PDA Section only!!
:victory:
Cool vats said:
Flash via odin
In PDA section :good:Download it from attached files!!
https://docs.google.com/file/d/0BzmT.../preview?pli=1
NOTE!! Flash in PDA Section only!!
:victory:
Click to expand...
Click to collapse
exactly what i said in previous post
:silly:
Hit thnks if i help you
Sent from my GT-S5830i using Tapatalk
dj88 said:
exactly what i said in previous post
:silly:
Hit thnks if i help you
Sent from my GT-S5830i using Tapatalk
Click to expand...
Click to collapse
I think he even copied your link LOL.
No, Bt i kw from whre you people get this..
Dont act smart!!
Sent from my GT-S5830i using Tapatalk 2
Cool vats said:
No, Bt i kw from whre you people get this..
Dont act smart!!
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I didn't said that
just shared link..
Hitesh2626 said:
I think he even copied your link LOL.
Click to expand...
Click to collapse
lol
Installation problem
Hi everyone
A friend gave me a S5839i and I tried to install cwm a hundred times, and It was completely impossible. I access to the stock recovery, apply the update from sd card and after selecting the approppiate file cwm appears on screen, but when you access again to recovery, goes to stock one. ¿Anybody can help me?
Thanks in advance
miguelagarcia2 said:
Hi everyone
A friend gave me a S5839i and I tried to install cwm a hundred times, and It was completely impossible. I access to the stock recovery, apply the update from sd card and after selecting the approppiate file cwm appears on screen, but when you access again to recovery, goes to stock one. ¿Anybody can help me?
Thanks in advance
Click to expand...
Click to collapse
What kernel your use? On Raphael Kernel you cannot replace CWM without flash with odin (boot.img)
il3gal said:
What kernel your use? On Raphael Kernel you cannot replace CWM without flash with odin (boot.img)
Click to expand...
Click to collapse
It is stock, I'm triying to flash another rom
Enviado desde mi GT-I8190N mediante Tapatalk
Getting Status 0 error while installing cm-11 from your link with this CWM 6.0.1.2
I don't know but how i have the CWM 6.0.1.2 as default after trying lot of things and my phone directly boots to 6..0.1.2 instead of stock recovery.
Please help how to install CM-11. Even CM-10 will do but not sure how to get the working build with my above CWM.
kingsdeb said:
Getting Status 0 error while installing cm-11 from your link with this CWM 6.0.1.2
I don't know but how i have the CWM 6.0.1.2 as default after trying lot of things and my phone directly boots to 6..0.1.2 instead of stock recovery.
Please help how to install CM-11. Even CM-10 will do but not sure how to get the working build with my above CWM.
Click to expand...
Click to collapse
MTD build does not required a oldest recovery. Find CWM 6.0.5.3 at Discussion thread. Restore back to stock and flash again. Well, it should be work for now.
RevolutionBolt said:
MTD build does not required a oldest recovery. Find CWM 6.0.5.3 at Discussion thread. Restore back to stock and flash again. Well, it should be work for now.
Click to expand...
Click to collapse
How to restore back to stock recovery ? I have some 6.0.5.3 CWM as well but not working. A little more explanation will help.
kingsdeb said:
How to restore back to stock recovery ? I have some 6.0.5.3 CWM as well but not working. A little more explanation will help.
Click to expand...
Click to collapse
Well, to get to stock recovery, download XXLK1 firmware anywhere. And restore with Odin. Make sure you put files in right places. And install back CM11 with latest nightly with CWM 6.0.5.3. It should work for now. You'll be fine after install but don't forget install Galaxy Y MODEM after installed CM11. It's bug on our CM11 if you don't install, we can't boot without install it. If you know this already, just leave it.

Categories

Resources