I take NANDROID backup yeseterday of harshjelly rom (with cocore kernel). now i m on jelly bean stock (rooted), jelly bean stock lagging hanging on rooted also so i m decided to restore my harshjelly nandroid backup, my question is when i restored can It get bootloop ??????? plzz tell???
becoz of cocore kernel it get bootloop or stuck?????
Sorry for my bad english
What you can do is flash cocore kernel and then restore nandroid backup. You won't end up in a bootloop.
archies20 said:
becoz of cocore kernel it get bootloop or stuck?????
Click to expand...
Click to collapse
szzlgupta said:
What you can do is flash cocore kernel and then restore nandroid backup. You won't end up in a bootloop.
Click to expand...
Click to collapse
Is it right that says @szzlgupta, in addition if you happen to get bootloop, go into recovery and do Wipe Cache and Dalvik, and everything got be just fine. :good:
NANDROID can backup cocore kernel or not????
archies20 said:
NANDROID can backup cocore kernel or not????
Click to expand...
Click to collapse
i think not., it just backs up phones system.
Flash cocore kernel and restore the backup
archies20 said:
NANDROID can backup cocore kernel or not????
Click to expand...
Click to collapse
szzlgupta said:
i think not., it just backs up phones system.
Flash cocore kernel and restore the backup
Click to expand...
Click to collapse
The Nandroid Backup is a snapshot of your device (it means everything on your phone – your apps, data, your current ROM and even the kernel is backed up) at the time you do the back up. If you restore the back up, it changes your phone BACK to that state. You will need custom recovery (CWM/TWRP). So make sure you have CWM or TWRP on your device.
http://forum.xda-developers.com/showthread.php?t=2190211
R_a_z_v_a_n said:
The Nandroid Backup is a snapshot of your device (it means everything on your phone – your apps, data, your current ROM and even the kernel is backed up) at the time you do the back up. If you restore the back up, it changes your phone BACK to that state. You will need custom recovery (CWM/TWRP). So make sure you have CWM or TWRP on your device.
http://forum.xda-developers.com/showthread.php?t=2190211
Click to expand...
Click to collapse
At the restored time can temporary CWM help to restored nandroid backup????
i mean can i use temporary CWM for restoring nandroid backup???
archies20 said:
At the restored time can temporary CWM help to restored nandroid backup????
Click to expand...
Click to collapse
Yes.
szzlgupta said:
i think not., it just backs up phones system.
Flash cocore kernel and restore the backup
Click to expand...
Click to collapse
R_a_z_v_a_n said:
The Nandroid Backup is a snapshot of your device (it means everything on your phone – your apps, data, your current ROM and even the kernel is backed up) at the time you do the back up. If you restore the back up, it changes your phone BACK to that state. You will need custom recovery (CWM/TWRP). So make sure you have CWM or TWRP on your device.
http://forum.xda-developers.com/showthread.php?t=2190211
Click to expand...
Click to collapse
Oh sorry
archies20 said:
K guys thanks for reply's :laugh: :good:
Click to expand...
Click to collapse
Simply press THANKS button, without posting thanks to those who help you. :highfive:
I´ve got the same problem and another possibility is after restore via odin you can root and open up update.zip for cwm or twrp recovery.I prefer Cwm..Then flash cocore kernel e/ep 8.0 or 8.2 higher is not recommended,because you can get into trouble like bootlop.
After flashing wipe/format user data wipe cache and dalvik:fingers-crossed:
reboot...pass
If you want to use cocore 8.6 you can flash from now via recovery menue
nandroid can backuped /preload partition. ????? if not It will bootloop i think?? @R_a_z_v_a_n
archies20 said:
nandroid can backuped /preload partition. ????? if not It will bootloop i think?? @R_a_z_v_a_n
Click to expand...
Click to collapse
You shouldn't get a bootloop when you do nandroid backup restore. Just when you do it from CM10.2 and CM11 it will get a bootloop because of preload partition.
shut_down said:
You shouldn't get a bootloop when you do nandroid backup restore. Just when you do it from CM10.2 and CM11 it will get a bootloop because of preload partition.
Click to expand...
Click to collapse
I am on harshjelly rom (update 5) and cocore kernel 8.6 can it will get bootloop???
archies20 said:
I am on harshjelly rom (update 5) and cocore kernel 8.6 can it will get bootloop???
Click to expand...
Click to collapse
I did lot of nandroid restores, and if backup is not corrupted I never had a bootloop. Even if you get one, you can do wipe cache, wipe dalvik cache, if that do not help do factory reset. And still if that do not help - flash stock JB firmware with Odin.
Послато са GT-I9070 уз помоћ Тапатока
shut_down said:
I did lot of nandroid restores, and if backup is not corrupted I never had a bootloop. Even if you get one, you can do wipe cache, wipe dalvik cache, if that do not help do factory reset. And still if that do not help - flash stock JB firmware with Odin.
Послато са GT-I9070 уз помоћ Тапатока
Click to expand...
Click to collapse
how to find out backup are corrupted or not???
archies20 said:
I am on harshjelly rom (update 5) and cocore kernel 8.6 can it will get bootloop???
Click to expand...
Click to collapse
First of all you must flash a lower kernel like cocore 8.0 or 8.2 .Wipe dalvik cache and format.Then flash version harshjelly 1 (reboot to generate dalvik cache) and after that (update5).reboot.
Now you can go into recovery and flash 8.6 or 8.8 but right now the harsh jelly tweaker isn´t working so well.
Happymaker said:
First of all you must flash a lower kernel like cocore 8.0 or 8.2 .Wipe dalvik cache and format.Then flash version harshjelly 1 (reboot to generate dalvik cache) and after that (update5).reboot.
Now you can go into recovery and flash 8.6 or 8.8 but right now the harsh jelly tweaker isn´t working so well.
Click to expand...
Click to collapse
i know how to flash i m asking about restored -_-
archies20 said:
how to find out backup are corrupted or not???
Click to expand...
Click to collapse
You will know when you fail to recover. But it will not happen 99%.
archies20 said:
how to find out backup are corrupted or not???
Click to expand...
Click to collapse
Your backup is corrupt only if you removed/played with some of it's files and you deleted it.
If it's intact as made, he can be corrupt.
Related
My phone running panadroid rom, after wipe data cache and install 4.1.1 rom leak my phone got bootloop. I mean stop at GT 7000 screen or samsung logo or enter the language choice screen then automatic reboot....
Can anybody upload the nandroid backup of 4.1.1 leak. I need it to restore my phone i think that's only way to my phone come up to 4.1.1
Did you tried to reflash the rom?
Or just flash a Safe Kernel like Hydracore first, then full wipes and flash stock ics rom via Odin.
Then reflash Safe Kernel and retry to flash 4.1.1 ROM.
joosh3 said:
Did you tried to reflash the rom?
Or just flash a Safe Kernel like Hydracore first, then full wipes and flash stock ics rom via Odin.
Then reflash Safe Kernel and retry to flash 4.1.1 ROM.
Click to expand...
Click to collapse
Yes i was. But also stop at language choosing screen .
Oh, try to flash another ROM based on XXLS2 Leaked or some custom ROM
Load the *.zip of the ROM on your SD Card and do format /system and all wipes (remember to use safe kernel)
Then flash and i hope it work :crying:
joosh3 said:
Oh, try to flash another ROM based on XXLS2 Leaked or some custom ROM
Load the *.zip of the ROM on your SD Card and do format /system and all wipes (remember to use safe kernel)
Then flash and i hope it work :crying:
Click to expand...
Click to collapse
I haved try alot of custom rom and also stay at language choosing then reboot. I must using nandroid backup to restore to panadroid rom. I thing my devide have problem with flashchip and i need nandroid backup file of 4.1.1 to update to leakrom
Can any body upload your nandroid backup file of 4.1.1 (( Many thankssssssss
That's bad, you never did some Nandroid backup of previous ROM's you used?
If yes try to restore it.
If not im sorry, i don't have what you need :crying:
joosh3 said:
That's bad, you never did some Nandroid backup of previous ROM's you used?
If yes try to restore it.
If not im sorry, i don't have what you need :crying:
Click to expand...
Click to collapse
Yes i have backup of panadroid and restore successfully. But now i can't install JB TW rom anymore
godoflove1988 said:
Yes i have backup of panadroid and restore successfully. But now i can't install JB TW rom anymore
Click to expand...
Click to collapse
The best thing is that your device isn't bricked. Did you tried as i said before? flashing Stock ICS ROM via Odin (not only custom Roms) , then Safe Kernel and start to flash JB ROM from this?
joosh3 said:
The best thing is that your device isn't bricked. Did you tried as i said before? flashing Stock ICS ROM via Odin (not only custom Roms) , then Safe Kernel and start to flash JB ROM from this?
Click to expand...
Click to collapse
Yes i was flash N7000DXLR2_N7000OLBLR1_N7000DXLR1_HOME.tar. And Phil kernel and then stuck at language choosing menu => reboot automatically
godoflove1988 said:
Yes i was flash N7000DXLR2_N7000OLBLR1_N7000DXLR1_HOME.tar. And Phil kernel and then stuck at language choosing menu => reboot automatically
Click to expand...
Click to collapse
Try to flash this one: N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5
You can download it from here: N7000XXLRQ_N7000DBTLRQ_DBT.zip
After download extract it and flash via Odin.
Hope it work (remember safe kernel)
godoflove1988 said:
Yes i was flash N7000DXLR2_N7000OLBLR1_N7000DXLR1_HOME.tar. And Phil kernel and then stuck at language choosing menu => reboot automatically
Click to expand...
Click to collapse
Just boot into Philz recovery and do factory reset. Phone should boot properly after that
Sent from my GT-N7000 using xda app-developers app
How to get Samsung touchwiz in CM 10 ROM ? i Don't like trabuchet Launcher .. .
Heartstoler1991 said:
How to get Samsung touchwiz in CM 10 ROM ? i Don't like trabuchet Launcher .. .
Click to expand...
Click to collapse
I think it is not possible, it needs TW framework. Find some TW theme for CM10.
Heartstoler1991 said:
How to get Samsung touchwiz in CM 10 ROM ? i Don't like trabuchet Launcher .. .
Click to expand...
Click to collapse
If you just want the TouchWiz launcher then take a look at this, this or this
Sami Kabir said:
If you just want the TouchWiz launcher then take a look at this, this or this
Click to expand...
Click to collapse
Yes ... its working fine .. !! One more question does CM supports cocore kernel ?
Heartstoler1991 said:
Yes ... its working fine .. !! One more question does CM supports cocore kernel ?
Click to expand...
Click to collapse
Nope. It can only be used with cm kernel. But then, cm kernel is also made by cocafe, so it's basically almost the same as cocore.
arffrhn said:
Nope. It can only be used with cm kernel. But then, cm kernel is also made by cocafe, so it's basically almost the same as cocore.
Click to expand...
Click to collapse
i dont have CWM backup of my stock jellybean...( i have TWRP backup ).. But if i want go back ..so i need to flash stock jellybean again via odin ? or any other way to restore TWRP backup ??
Heartstoler1991 said:
i dont have CWM backup of my stock jellybean...( i have TWRP backup ).. But if i want go back ..so i need to flash stock jellybean again via odin ? or any other way to restore TWRP backup ??
Click to expand...
Click to collapse
Flash CoCore Kernel with TWRP from your CM's CWM and then advance>>reboot to recovery. Then restore your backup with TWRP
Heartstoler1991 said:
i dont have CWM backup of my stock jellybean...( i have TWRP backup ).. But if i want go back ..so i need to flash stock jellybean again via odin ? or any other way to restore TWRP backup ??
Click to expand...
Click to collapse
I see. If it's about restoring, then:
1. Wipe data, cache, dalvik.
2. Format system (be careful).
3. Flash your preferred cocore kernel and advanced>>reboot revocery
4. Restore backup (might need to mount first).
5. Done. :good:
arffrhn said:
I see. If it's about restoring, then:
1. Wipe data, cache, dalvik.
2. Format system (be careful).
3. Flash your preferred cocore kernel and advanced>>reboot revocery
4. Restore backup (might need to mount first).
5. Done. :good:
Click to expand...
Click to collapse
can I flash cocore kernel using UKF ..in CM ?
Heartstoler1991 said:
can I flash cocore kernel using UKF ..in CM ?
Click to expand...
Click to collapse
As using cocore on cm will cause bootloops. So I don't think you can flash it with ukf in cm. Maybe you can but it would be unwise to do so. Plus, it's easier to flash it in recovery.
Sent from my GT-I9070 using xda app-developers app
Heartstoler1991 said:
can I flash cocore kernel using UKF ..in CM ?
Click to expand...
Click to collapse
yes but then u need restart to recovery otherwise system not boot or brick your phone
Hi everyone!
Maybe I have a basic doubt, but because I don´t understand, I like have clear this. Yesterday I decided root, replace the recovery and install a custom rom on my Note (N7000). I choose the kernel from PhilZ and install following the recommended method (very easy).
After this all work perfect, I do a full backup of actual system (this is nandroid backup, right?) and after this I install the CM 10.1.3 that also work well. I not rememeber exactly, but following some steps to install this ROM I do before or after install this procedures also: WIPE/DATA FACTORY RESET, WIPE CACHE, WIPE DALVIK CACHE. This procedures are correct?
The device work well, but I have a big doubt because if I boot into recovery I not see anymore the PhilZ touch interface, now I see:
CWM Based Recovery 6.0.3.6
that is other recovery, right? Is normal this behavior? I not understand in what step I change the PhilZ recovery to CWM.
Thanks in advance for all info and help to clear this
This is the CWM recovery same as philz, the difference is that, the version you used before.. It was touch, and after flashing the recovery changes as the CM 10.1 flashed their own kernel...
so it is the same recovery, do not worry
and yes, AOSP/CM roms have their specific kernels, so please do not flash philz on the current recovery...
and one more thing... the process is correct, do a wipe data and factory reset and then format system and preload
Thanks NoteboyTech, yes, I know that work basically like PhilZ, but my main doubt is in what moment of all procedures are installed the CWM Based Recovery. This mean that this CWM are installed in the moment that I install the CM 10.1.3?
Now if I like keep the PhilZ, is safe if I boot again in recovery and install from the .zip file from PhilZ again? or not recommend this?
The wipe: I need made the wipe factory, cache and dalvik before each time that I like restore a ROM or also kernel?
Thanks!!!
You are using a cm rom. Philz kernel Tw doesn't work with cm rom. If you flash philz on cm, phone won't boot.
There is no need to wipe if you just changing the kernel.
If you want the touch recovery, you can install nx kernel which includes philz recovery and is a cm based kernel.
Sent from my GT-I9500 using xda premium
DroidAR said:
Thanks NoteboyTech, yes, I know that work basically like PhilZ, but my main doubt is in what moment of all procedures are installed the CWM Based Recovery. This mean that this CWM are installed in the moment that I install the CM 10.1.3?
Now if I like keep the PhilZ, is safe if I boot again in recovery and install from the .zip file from PhilZ again? or not recommend this?
The wipe: I need made the wipe factory, cache and dalvik before each time that I like restore a ROM or also kernel?
Thanks!!!
Click to expand...
Click to collapse
Read my post again, I edited it!!!
Thanks to all!
Now I believe that understand a bit more
Perfect. This mean that if I like keep the PhilZ as recovery I need install the nx kernel, right?
Now, if for example in the future I like try one new version or actual version of my stock ROM, is safe to download from Samsung Updates website, install from .zip like I do with the CM, and ready, I have the stock ROM. Is correct?
OK, I not need wipe anything for kernel installations, but yes for ROMs, right?
Only data/factory and cache or also dalvik?
This wipes I need made before install the ROM or after?
Thanks for all!
Stock rom has be be installed using odin not like the cm
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
Stock rom has be be installed using odin not like the cm
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Thanks!, ah, right, because stock rom´s should be installed using download mode instead recovery mode, right?
And the last: all the native apps from Samsung like SPen, etc, that go with the stock rom, I can download from any place or installed now into the CM 10.1 or future versions of CM? Thanks!
DroidAR said:
And the last: all the native apps from Samsung like SPen, etc, that go with the stock rom, I can download from any place or installed now into the CM 10.1 or future versions of CM? Thanks!
Click to expand...
Click to collapse
Sorry bro, CM roms cannot do TW features like SNOTE, SPEN, and all.. so with CM you loose all samsung goodies..
NoteboyTech said:
Sorry bro, CM roms cannot do TW features like SNOTE, SPEN, and all.. so with CM you loose all samsung goodies..
Click to expand...
Click to collapse
Ups! :S Small detail Thanks!
One more that I detect: when I boot into recovery (CWM-based Recovery v6.0.3.6) I see that the last and bottom line on main screen say this message bellow. Its important this? Thanks!
Code:
Warning: No file_contexts
Nothing wrong with it. Comes on new Cwm recovery.
Sent from my GT-I9500 using xda premium
Today I try make a complete nandroid backup, but can be possible that the CWM Based Recovery 6.0.3.6 don´t have this option?
Some days back, with the PhilZ recovery, I can do very easy.
To restore a nandroid backup I need use the same recovery or the generated files are compatible with all recovery?
????
CWM 6 versions are compatible.. it can be restored using any recovery.
Why can you make a nandroid back on 6.0.3.6?
Main Menu> Backup & Restore> Backup to Internal or External SD
nokiamodeln91 said:
????
Click to expand...
Click to collapse
Thanks nokiamodeln91!, maybe yesterday when I try Im a bit sleepy at night Also in this moment I found a "nandroid" name into the menu.
Have a link to read how backup the IMEI number?
Can be possible that I detect that after I made all these changes (change the recovery, root, install new rom, etc) the Serial number of the device has changed? I can change from any area to the original one?
Option to backup efs is in the philz recovery. Or you can use ktool from the playstore to backup efs. This has to be done as soon as you root. There is no point of backup if the imei has already changed.
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
Option to backup efs is in the philz recovery. Or you can use ktool from the playstore to backup efs. This has to be done as soon as you root.
Click to expand...
Click to collapse
OK, as already tell me I can´t install the PhilZ recovery on CM 10.2, this mean that my only option is install the ktool and backup EFS (this backup the IMEI), right?
nokiamodeln91 said:
There is no point of backup if the imei has already changed.
Click to expand...
Click to collapse
No, the IMEI is correct, the change is in the SERIAL NUMBER of the device, not IMEI. This can be fixed writing the correct serial number?
Not sure how to correct the serial number.
Ktool is a good tool to backup efs.
Sent from my GT-I9500 using xda premium
Hello!
I have installed Cocore kernell (8.2 and 8.6.4) a few times in my stock JB rom (LQL) but when I install CM 10.2 and if i need to go back to my stock rom i tried to restore my backup made it with the CWM that comes with cocore, it's pass without problems but when the rom start, stop a lot of process making impossible to work in it, and start in configuration wizard
someone have the same problem, there is a way to fix it?
Thanks in advance guys!!!
If you are on Android 4.3 after restoring your backup you need to reboot to recovery (recovery will change as you are on Cocore kernel) and then => format preload, then reboot, should work fine
Sent from Italy using Tapatalk
T.M. said:
someone have the same problem, there is a way to fix it?
Click to expand...
Click to collapse
From @Paul L. quote:
Paul L. said:
Format /preload as ext4
download the cocore TWRP kernel, install it, (re-)reboot to recovery, go to advanced (on TWRP, yes, it needs to be TWRP), terminal command, press enter (to select the directory to work from, which should be "/"), and run
make_ext4fs /dev/block/mmcblk0p9
(DANGER: IF YOU FORMAT WHATEVER ELSE IT MAY BRICK YOUR DEVICE, just check that our /dev/block/mmcblk0p9 is 0p9 at the end, it CAN'T BE ANYTHING ELSE.)
Then, go back and onto mount menu, and mount /preload partition. And then just install whatever ROM you want.
I am saying this because re-installing the stock ROM from ODIN can be dangerous if the power it's cut out or the USB is suddenly disconnected. Just format preload partition (there is nothing critical there, so it's safe, or safer than ODIN that's it)
Click to expand...
Click to collapse
R_a_z_v_a_n said:
From @Paul L. quote:
Click to expand...
Click to collapse
Yeah, I noticed it but it's actually not necessary
Sent from Italy using Tapatalk
Thanks mates!
Toni5830 said:
If you are on Android 4.3 after restoring your backup you need to reboot to recovery (recovery will change as you are on Cocore kernel) and then => format preload, then reboot, should work fine
Sent from Italy using Tapatalk
Click to expand...
Click to collapse
Is this valid for 4.4? thanks in advance and sorry my poor English:good:
raan4 said:
Is this valid for 4.4? thanks in advance and sorry my poor English:good:
Click to expand...
Click to collapse
Ehm, I don't know
Sent from Italy using Tapatalk
raan4 said:
Is this valid for 4.4? thanks in advance and sorry my poor English:good:
Click to expand...
Click to collapse
Yes, since some version of CM10.2 TeamJanice uses preload partition for swap. So it must be formated, if that do not work - flash stock JB.
shut_down said:
Yes, since some version of CM10.2 TeamJanice uses preload partition for swap. So it must be formated, if that do not work - flash stock JB.
Click to expand...
Click to collapse
Thanks for your attention
I have a question
Then the steps to back to stock rom would be:
1-recovery (cwm)
2-format preload
3 restore stock
?????
Thanks in advance and sorry my poor English
raan4 said:
Thanks for your attention
I have a question
Then the steps to back to stock rom would be:
1-recovery (cwm)
2-format preload
3 restore stock
?????
Thanks in advance and sorry my poor English
Click to expand...
Click to collapse
You can go back like that, or you can flash stock fb, root, install cocore and restore your backup (if you want to go back to your backup).
Послато са GT-I9070 уз помоћ Тапатока
so basically you need the CWM?
if so here you go HERE
br4infreze said:
so basically you need the CWM?
if so here you go HERE
Click to expand...
Click to collapse
No, he already have it on CM10.2. He need to repartition /preload partition.
shut_down said:
No, he already have it on CM10.2. He need to repartition /preload partition.
Click to expand...
Click to collapse
ohhhh
Well, it so happened that I was on omni rom 4 3.1 with cocore kernel twrp recovery and I saw in a thread that we can theme our recovery by adding a ui.zip file in the theme folder of twrp. Ever since then, my phone boots in recovery only (without the three button combination). Plus in twrp, the theme is applied but I get a super zoomed view of the recovery so I can't restore nandroid as well. Of course, I used my last resort and brought back my phone to stock through odin but the problem is what did I do wrong and what should I take care of to prevent this sort of **** from happening in the future?
Sent from my GT-I9070 using xda app-developers app
Why did you use the co-core kernel for a cm ROM??
The rom shouldn't boot if you did this..
BTW You are getting the super zoomed recovery maybe because you are using the ui.zip designed for a mdpi/ldpi screen resolution.
Our screen is hdpi.
Sent from my GT-I9070 using Tapatalk
But I used the ui.zip for hdpi devices only.. and I dont know.. the rom just flashed when I used cocore. By the way.. I dont see any other method for obtaning recovery except shaan's temporary cwm.. is there any other method as well??
Sent from my GT-I9070 using xda app-developers app
RazaVakil7995 said:
Well, it so happened that I was on omni rom 4 3.1 with cocore kernel twrp recovery and I saw in a thread that we can theme our recovery by adding a ui.zip file in the theme folder of twrp. Ever since then, my phone boots in recovery only (without the three button combination). Plus in twrp, the theme is applied but I get a super zoomed view of the recovery so I can't restore nandroid as well. Of course, I used my last resort and brought back my phone to stock through odin but the problem is what did I do wrong and what should I take care of to prevent this sort of **** from happening in the future?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Do not mess with something that you are not sure that works on our phone. If you read that someone that has I9070 phone is using something, you can use it. Searching and using stuff from other phones can make you mess like that you got.
Omni MUST use its kernel, you CAN'T use COCORE on it. You will end up with a bootloop if you use COCORE on OMNI.
What you need to do is to flash stock FIRMWARE with ODIN. Download CoCore kernel, UNPACK it and use KERNEL.BIN.MD5 (copy to phone memory). Install UKF and ROOT EXPLORER. Open Universal kernel flasher and follow the procedure to install COCORE. Install, reboot and you have permanent recovery (CWM or TWRP depends what CoCore version you choose).
Perhaps you guys misunderstood me.. I did not flash cocore on Omni.. I flashed cocore on stock and then I flashed omni rom.. so I guess I have permanent recovery..
Im sorry if I sound like a noob but hey, every expert was once a noob, Im learning
I agree to the part of messing with things that people Dont use on our phone, I'll see to that in future..
Sent from my GT-I9070 using xda app-developers app
RazaVakil7995 said:
Perhaps you guys misunderstood me.. I did not flash cocore on Omni.. I flashed cocore on stock and then I flashed omni rom.. so I guess I have permanent recovery..
Im sorry if I sound like a noob but hey, every expert was once a noob, Im learning
I agree to the part of messing with things that people Dont use on our phone, I'll see to that in future..
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I missunderstood. Because you wrote: "that I was on omni rom 4 3.1 with cocore kernel twrp"
P.S. Maybe that theme problem have something to do with version of TWRP. But I can't tell for sure.
dagger said:
Why did you use the co-core kernel for a cm ROM??
The rom shouldn't boot if you did this..
BTW You are getting the super zoomed recovery maybe because you are using the ui.zip designed for a mdpi/ldpi screen resolution.
Our screen is hdpi.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
By the way, why did you tell the rom should not boot? Is it because the cocorekernel is only supported on android 4.1 or some other reason?
shut_down said:
I missunderstood. Because you wrote: "that I was on omni rom 4 3.1 with cocore kernel twrp"
P.S. Maybe that theme problem have something to do with version of TWRP. But I can't tell for sure.
Click to expand...
Click to collapse
And when I went from omni rom to cm11 by maclaw, my recovery changed to cwm... any idea why did this happen because I was supposed to have permanent twrp
RazaVakil7995 said:
And when I went from omni rom to cm11 by maclaw, my recovery changed to cwm... any idea why did this happen because I was supposed to have permanent twrp
Click to expand...
Click to collapse
The recovery in our phone is dependent on the kernel.
So if the kennel changes, the recovery changes..
Sent from my GT-I9070 using Tapatalk
custom recovery in cm11
So if i flash from stock rom jb to cm11 (tc) , the recovery changes to cwm , no matter if u had CoCore+cwm or CoCore+ TWRP in stock rom.
What happens to the kernel in cm11?
i have done nandroid backup with TWRP, but since recovery changes to cwm in cm11 , will i no longer be able to restore the backup ?
Would it be better to do a nandroid backup with CoCore+Cwm then?
[email protected] said:
So if i flash from stock rom jb to cm11 (tc) , the recovery changes to cwm , no matter if u had CoCore+cwm or CoCore+ TWRP in stock rom.
What happens to the kernel in cm11?
i have done nandroid backup with TWRP, but since recovery changes to cwm in cm11 , will i no longer be able to restore the backup ?
Would it be better to do a nandroid backup with CoCore+Cwm then?
Click to expand...
Click to collapse
If you flash stock JB firmware you get stock recovery (not CWM or TWRP). And you can't use nandroid backup of JB if you are on CM11 because Preload partition is used for SWAP, and it will be non usable for JB. You must flash script to repartition it or flash stock JB firmware. If you have TWRP backup, flash stock JB, root it, install CoCore with TWRP recovery and there you go...
Backup
shut_down said:
If you flash stock JB firmware you get stock recovery (not CWM or TWRP). And you can't use nandroid backup of JB if you are on CM11 because Preload partition is used for SWAP, and it will be non usable for JB. You must flash script to repartition it or flash stock JB firmware. If you have TWRP backup, flash stock JB, root it, install CoCore with TWRP recovery and there you go...
Click to expand...
Click to collapse
Thank you. So i understand that nandroid backup is useful only when something goes wrong during the process of upgrading from stock JB to CM11 .
one more doubt, I have also backed up app user data + system data with Titanium Backup Pro. That can be used to restore all data after i upgrade to cm11 right? Will Titanium Backup Pro take care of efs ( related to IMEI no.) if something goes wrong after flashing cm11. Btw i have also backed up efs with Samsung Tools app.
Also could you enlighten me about my first question in previous post " what happens to kernel in cm11" ?
[email protected] said:
Thank you. So i understand that nandroid backup is useful only when something goes wrong during the process of upgrading from stock JB to CM11 .
one more doubt, I have also backed up app user data + system data with Titanium Backup Pro. That can be used to restore all data after i upgrade to cm11 right? Will Titanium Backup Pro take care of efs ( related to IMEI no.) if something goes wrong after flashing cm11. Btw i have also backed up efs with Samsung Tools app.
Also could you enlighten me about my first question in previous post " what happens to kernel in cm11" ?
Click to expand...
Click to collapse
CM11 ROM 4.4.2 or 4.4.3 is the result of an update of version 4.1.2 of Android Jelly Bean. If right now, you have a backup system and applications that have been stored in the system when you are Jelly Bean. Then you want to restore the backup to the CM11, then I guess you will get an error. Because the system is Jelly Bean, and Kitkat system is 2 different things in the context of the "system". So you can do this while using TB Pro applications only restore data only, such as: backup contacts, sms / mms, third-party applications such as, apk, application of playstore etc.. Not the whole system ROM previously, JB.
Related to the kernel, system jelly bean, and kitkat system, has different kernel. In this case the kernel is owned by CM11 ROM, not the stock ROM 4.4.2/4.4.3 by samsung. CM11 kernel 4.4.2/4.4.3 allows us to perform GPU OC and CPU OC/UC/OV/UV In the default kernel Stock ROM (JB), you will not be able to do it, unless you replace it with a custom kernel, as the Cocore kernel. Hopefully it can be more clear.