Hi there,
Im facing an issue with this HTC One im trying to root. For some reason, neither TWRP or Clockworkmod can mount the /system and the /cache partitions, so i can't flash the root zip. I have tried several stuff but still got the same error. Anyone knows whats happening?
I have the Sprint Variant, bootloader is already unlocked. Here is a picture of the bootloader for more info.
View attachment 2502223
BUMP. Anyone?
You should be posting in the SPrint HTC One QA.. Potentially you have installed the international Recovery and that has messed up your partition. You will need to run your stock RUU or restrore atleast recovery to try to fix system/cache.
How to fix corrupt sdcard partitions on your HTC One.
Make sure you're in the bootloader go into fastboot and make sure the downloaded image is in the same folder as your fastboot. recovery.img below is your STOCK recovery, not custom.
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
Go into bootloader and then choose Factory Reset - let that finish running <<< Important!
Phone will go out and start bootlooping. Now power off and go back to bootloader mode:
Go into fastboot
fastboot flash recovery <custom recovery>.img
fastboot erase cache
fastboot reboot-bootloader
Now you can go into custom recovery and you should be good to go now.
Click to expand...
Click to collapse
SaHiLzZ said:
You should be posting in the SPrint HTC One QA.. Potentially you have installed the international Recovery and that has messed up your partition. You will need to run your stock RUU or restrore atleast recovery to try to fix system/cache.
Click to expand...
Click to collapse
i have same problem all three partitions /cache, /system, /data can't be mounted in Recovery. and the above solution didn't work for me. any other suggestions?? thx
SaHiLzZ said:
You should be posting in the SPrint HTC One QA.. Potentially you have installed the international Recovery and that has messed up your partition. You will need to run your stock RUU or restrore atleast recovery to try to fix system/cache.
Click to expand...
Click to collapse
Hi,
Thanks a lot, this did it...
I couldn't get the partitions back (I tried even with ext4 partitioning over fastboot shell).
This is just perfectly elegant solution.
Nik
Corrupted Partition - HTC One (AT&T)
SaHiLzZ said:
You should be posting in the SPrint HTC One QA.. Potentially you have installed the international Recovery and that has messed up your partition. You will need to run your stock RUU or restrore atleast recovery to try to fix system/cache.
Click to expand...
Click to collapse
It didn't worked for me. the process which helped me was:
find the original Stock recovery.img for your device.
Boot your device in Bootloader and flash stock recovery
fastboot flash recovery recovery.img
go back to bootloader menu and select FACTORY RESET
once again boot into Bootloader and Flash any custom Recovery CWM or TWRP
boot into recovery and thats it. This SOLVED my /data mounting problem and adb devices not detecting my phone problem as well
Good luck
Oops wrong !
This really made my day.
Am using HTC One M7 Dual SIM (DS) m7cdwg. And this method works smoothly. Thanks Bro, for the information
khalidnisar said:
It didn't worked for me. the process which helped me was:
find the original Stock recovery.img for your device.
Boot your device in Bootloader and flash stock recovery
fastboot flash recovery recovery.img
go back to bootloader menu and select FACTORY RESET
once again boot into Bootloader and Flash any custom Recovery CWM or TWRP
boot into recovery and thats it. This SOLVED my /data mounting problem and adb devices not detecting my phone problem as well
Good luck
Click to expand...
Click to collapse
"how to install correctly? TWRP says Failed to mount '/system' (Invalid argument). Where is arguments? how can I change the arguments? Previous ROM was Team Galaxy Project's OREO ROM."
I've posted wrong forum here I was looking at DevBase rom of G930. Sorry guys
Related
My first post but I've been lurking for years. Pretty good with search, etc.
If anyone could help I would really appreciate it. I've been working on this for 12 hours!
I updated to Cyanogen 4.1.999
I successfully installed the new radio and fastboot confirms 2.22.19.261
Here's where I made the mistake in the following directions:
I have CMRecovery Image 1.4
-Go to http://developer.htc.com/adp.html
-DL the 1.6 "recovery image" the file name is - signed-dream_devphone_userdebug-ota-14721.zip
-Then DL CyanogenMod-4.1.99
http://n0rp.chemlab.org/android/expe....99-signed.zip
-put them both on your SD card
-Boot up into CM recovery image 1.4 by rebooting and holding the home button, do a wipe.
-update using any zip to that "recovery image" (signed-dream_devphone_userdebug-ota-14721.zip)
(it should auto reboot install radio then reboot again and load back up to the CMrecovery img screen)
I mistakenly rebooted normally instead of applying the update in the next step. This is when the black screen began.
-Then update any zip usig CyanogenMod-4.1.99 (update-cm-4.1.99-signed.zip)
-Then power on the phone
I am stuck at the black screen of death.
I can fastboot and I've fastbooted the pimp recovery and still can't access recovery. Just get the triangle.
So, during update after new radio I rebooted normally instead of updating with the final build update got a black screen and have no recovery.
I've tried fastboot flash recovery and fastboot update.
fastboot flash recovery is succesful
fastboot update or fastboot flashall give me the "archive does not contain android-info.text and android-product.text" errors.
Any ideas would be greatly appreciated.
this should be posted in Q/A not development.
cingall said:
this should be posted in Q/A not development.
Click to expand...
Click to collapse
Sorry!
Mod please move. Thanks!
if you have access to fastboot, do a fastboot flash everything... from radio, system, and what not (forgetting something)
if that doesn't work... do a fastboot of the radio and boot and system, do everything.
basically do a fastboot of the normal dev 1.6 system....
its on htc's website.... gl dude
theomajigga said:
if you have access to fastboot, do a fastboot flash everything... from radio, system, and what not (forgetting something)
if that doesn't work... do a fastboot of the radio and boot and system, do everything.
basically do a fastboot of the normal dev 1.6 system....
its on htc's website.... gl dude
Click to expand...
Click to collapse
any ideas on the commands to flash them as flashall? HTC's site has them as separate files so I can only flash the "recovery" file.
I'm sorry to be somewhat of a noob with the actual codes. Could you be more specifc with which files to flash with which commands?
TIA!
Using the HTC website 1.6 "recovery" with fastboot update I get the following:
Error: update package has no android-info.txt or android-product.txt
I can't figure out how to flash the radio or system files in any other way than update in fastboot.
Did you erase the recovery? When this happened to me, just installing CM 1.4 from fastboot did not work, I had to erase the recovery then install. Hope this helps.
Also remove your SD card while booting, as prior stuff in your ext3 partition can cause black screens during boot. If that fixes it, you need to reformat your ext3.
The triangle you see is the standard recovery, to access it you need to do alt-L?or alt-x cant remember. To fix you need to flash cm-recovery to do this reboot into the boot loader (power + camera) plug in usb and hit the back button you should see "fastboot" then run
fastboot erase recovery
fastboot flash recovery cm-recovery-1.4.img
seehttp://forum.xda-developers.com/showthread.php?t=523558
then install rom as normal
okay this happened to me as well. I just made sure that I wiped, then started allover again. i had to do it a couple of times but it worked. just make sure that you still have the files on your SD card.
Good Luck!!!!
brnbock said:
Did you erase the recovery? When this happened to me, just installing CM 1.4 from fastboot did not work, I had to erase the recovery then install. Hope this helps.
Click to expand...
Click to collapse
You are a STAR!! Thank you, thank you, thank you!! I knew it was something stupid!
Back at the recovery console! woot!!!
Mods please close this thread!
Please Help "Brick" with Cyanogen's newest upate
Do you still need help bricking your phone???
took 30 min to post a re.. sorry i was late
fastboot erase recovery
fastboot flash recovery *name of recovery*
fastboot flash system system.img
fastboot flash userdata data.img
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
That should fix it.
ugh, now I am stuck at the g1 screen after a reboot of a successful update.
reformatted sd and all probs are solved!
mghtyred said:
Please Help "Brick" with Cyanogen's newest upate
Do you still need help bricking your phone???
Click to expand...
Click to collapse
Hi mghtyred (of tmobile forums) welcome to XDA
Hi Xda
Forgive me for what you are about to read, as I have carried out some dumb ### noobness:
I was running Sinless 5.1Gpe rom (great rom) anyways I wanted to return to a sense based rom so decided to go for ARHD 40.2 fter reading a number of posts mentioning doing a complete wipe of the phone including SDCARD. I checked the process of pushing via adb and all seemed simple enough.
I initially did a test and it pushed the file, so then i carried out the complete wipe (no OS, no rom on sd card to flash). I then tried to push the rom and it failed. I tried a number of different ways sideload too.
I managed to get the rom to push in the end using the lastest TWRP of which it would not allow me to do rom failed to flash...
Now this is the stupid part, TWRP became unresponsive, and every time I tried to boot into recovery it would kick me out to the spash screen and bootloop. I did the fastboot erase cache without any success.
I managed to switch to CWM but could not mount anything so came across a post about switching to stock....This is the really stupid part. I flashed a stock recovery and also I now have a relocked bootloader.
Is this phone now bricked??
I have fastboot available
I am S-off
I can boot into stock recovery (Red triangle)
I cannot use ADB (device not recognised)
I cannot re unlock bootloader (tried twice and failed) - I will try again as it got to 4am and had to be up for work at 6am.
Any help really really apreciated.
Many thanks
Mick
I will get there said:
Now this is the stupid part, TWRP became unresponsive, and every time I tried to boot into recovery it would kick me out to the spash screen and bootloop. I did the fastboot erase cache without any success.
I managed to switch to CWM but could not mount anything so came across a post about switching to stock....This is the really stupid part. I flashed a stock recovery and also I now have a relocked bootloader.
Is this phone now bricked??
I have fastboot available
I am S-off
I can boot into stock recovery (Red triangle)
I cannot use ADB (device not recognised)
I cannot re unlock bootloader (tried twice and failed) - I will try again as it got to 4am and had to be up for work at 6am.
Any help really really apreciated.
Many thanks
Mick
Click to expand...
Click to collapse
How did you unlock the first time? HTCDev or S-OFF?
Can you post the error you get when you try to unlock?
I will get there said:
Hi Xda
I have fastboot available
I am S-off
I can boot into stock recovery (Red triangle)
I cannot use ADB (device not recognised)
I cannot re unlock bootloader (tried twice and failed) - I will try again as it got to 4am and had to be up for work at 6am.
Any help really really apreciated.
Many thanks
Mick
Click to expand...
Click to collapse
if you have s-off you should flash back a custom recovery:
fastboot erase cache
fastboot flash recovery <name of recovery>.img
fastboot erase cache
fastboot reboot-bootloader
-> enter RECOVERY, and adb should be working again,
use this to unlock your phone: http://forum.xda-developers.com/showthread.php?t=2475914
there's also a handy Guru Bootloader Reset (flashable zip): http://forum.xda-developers.com/showthread.php?t=2527194
but it needs either CWM 6.0.3.2+, or TWRP 2.6.3.3+ to work.
or even "revone -u"
I will get there said:
Hi Xda
Forgive me for what you are about to read, as I have carried out some dumb ### noobness:
I was running Sinless 5.1Gpe rom (great rom) anyways I wanted to return to a sense based rom so decided to go for ARHD 40.2 fter reading a number of posts mentioning doing a complete wipe of the phone including SDCARD. I checked the process of pushing via adb and all seemed simple enough.
I initially did a test and it pushed the file, so then i carried out the complete wipe (no OS, no rom on sd card to flash). I then tried to push the rom and it failed. I tried a number of different ways sideload too.
I managed to get the rom to push in the end using the lastest TWRP of which it would not allow me to do rom failed to flash...
Now this is the stupid part, TWRP became unresponsive, and every time I tried to boot into recovery it would kick me out to the spash screen and bootloop. I did the fastboot erase cache without any success.
I managed to switch to CWM but could not mount anything so came across a post about switching to stock....This is the really stupid part. I flashed a stock recovery and also I now have a relocked bootloader.
Is this phone now bricked??
I have fastboot available
I am S-off
I can boot into stock recovery (Red triangle)
I cannot use ADB (device not recognised)
I cannot re unlock bootloader (tried twice and failed) - I will try again as it got to 4am and had to be up for work at 6am.
Any help really really apreciated.
Many thanks
Mick
Click to expand...
Click to collapse
If you can get to the stock recovery press volume up then power button and quickly release both buttons and you should be in stock recovery. From here you should be able to follow any of the posted steps to flash a RUU back to pure stock.
solbirn said:
How did you unlock the first time? HTCDev or S-OFF?
Can you post the error you get when you try to unlock?
Click to expand...
Click to collapse
Hi thanks for your response, I initially HTCDev then rumrunner to gain s-off.
The error I get is:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\Michael\Desktop\Adb And Fastboot>fastboot flash unlocktoken Unlock_code
.bin
target reported max download size of 1514139648 bytes
error: cannot load 'Unlock_code.bin': No error
C:\Users\Michael\Desktop\Adb And Fastboot>
nkk71 said:
if you have s-off you should flash back a custom recovery:
fastboot erase cache
fastboot flash recovery <name of recovery>.img
fastboot erase cache
fastboot reboot-bootloader
-> enter RECOVERY, and adb should be working again,
use this to unlock your phone: http://forum.xda-developers.com/showthread.php?t=2475914
there's also a handy Guru Bootloader Reset (flashable zip): http://forum.xda-developers.com/showthread.php?t=2527194
but it needs either CWM 6.0.3.2+, or TWRP 2.6.3.3+ to work.
or even "revone -u"
Click to expand...
Click to collapse
Hey thanks for your response
I cant flash custom recovery the error i get is similar to trying to unlock.(above)
I cannot also use that thread because I cannot access adb (even though my phone recognises fastboot in device manager, when I go to what is now stock recovery is disappears from device manager)
I have no OS so cannot open up emulator for revone.
loughary said:
If you can get to the stock recovery press volume up then power button and quickly release both buttons and you should be in stock recovery. From here you should be able to follow any of the posted steps to flash a RUU back to pure stock.
Click to expand...
Click to collapse
Hey thanks for responding
I can get into stock android recovery(3e) it enters after notifying me that it failed to mount sd card 5 times then finishes with cannot mount sdcard (no such file or directory)
then finally write host_mode:0 done
any further suggestions?
I will get there said:
Hi thanks for your response, I initially HTCDev then rumrunner to gain s-off.
The error I get is:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\Michael\Desktop\Adb And Fastboot>fastboot flash unlocktoken Unlock_code
.bin
target reported max download size of 1514139648 bytes
error: cannot load 'Unlock_code.bin': No error
C:\Users\Michael\Desktop\Adb And Fastboot>
Hey thanks for your response
I cant flash custom recovery the error i get is similar to trying to unlock.(above)
I cannot also use that thread because I cannot access adb (even though my phone recognises fastboot in device manager, when I go to what is now stock recovery is disappears from device manager)
I have no OS so cannot open up emulator for revone.
Hey thanks for responding
I can get into stock android recovery(3e) it enters after notifying me that it failed to mount sd card 5 times then finishes with cannot mount sdcard (no such file or directory)
then finally write host_mode:0 done
any further suggestions?
Click to expand...
Click to collapse
You're getting "cannot load"? That just means the filename is wrong, as simple as that. If ur on Windows, check for .img.img (double extension)
Sent from my HTC One using Tapatalk
nkk71 said:
You're getting "cannot load"? That just means the filename is wrong, as simple as that. If ur on Windows, check for .img.img (double extension)
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Thanks @nkk71
I now have an unlocked bootloader
I have also now flashed CWM 6.0.4.5 however I still do not have adb available. The difference now is fastboot is recognised in device manager as before but when I boot into CWM instead of it dissapearing, it moves to 'other devices' one (with yellow exclamation) I know it did this before because of drivers not being installed/recognised but I have htc sync manager installed which in theory has installed the drivers??!
Anything else I can try without adb?
Again many thanks for your assistance, I see you in a number of threads helping people...top bloke!
Further update
I downgraded my hboot back to 1.55 and now TRWP is now functioning, I have now pushed a rom to the phone, however flash fails due to "unable to mount to internal storage"
Is there a fix for this?
Many thanks
I will get there said:
Further update
I downgraded my hboot back to 1.55 and now TRWP is now functioning, I have now pushed a rom to the phone, however flash fails due to "unable to mount to internal storage"
Is there a fix for this?
Many thanks
Click to expand...
Click to collapse
I suggest that you downgrade to Hboot 1.44, keep the bootloader locked and run the 1.28.401.7 RUU to be completely stock. Then its up to you whether you re staying stock or flashing sth custom.
Ivanovic said:
I suggest that you downgrade to Hboot 1.44, keep the bootloader locked and run the 1.28.401.7 RUU to be completely stock. Then its up to you whether you re staying stock or flashing sth custom.
Click to expand...
Click to collapse
Thanks @Ivanovic
I have since moved on a little further, i have now managed to push a rom via sideload, when i then go to flash it says:
Updating partion details....
E:unable to open zip file.
Error flashing zip /sdcard/sideload.zip
updating partition..details
failed
do you know a workaround this, if not could you direct me to a page with both hboot 1.44 and the RUU please
I will get there said:
Thanks @Ivanovic
I have since moved on a little further, i have now managed to push a rom via sideload, when i then go to flash it says:
Updating partion details....
E:unable to open zip file.
Error flashing zip /sdcard/sideload.zip
updating partition..details
failed
do you know a workaround this, if not could you direct me to a page with both hboot 1.44 and the RUU please
Click to expand...
Click to collapse
IF you re flashing a 4.4 ROM then use TWRP 2.6.3.3 or latest CWM
IF you re flashing a 4.3/4.2 ROM then use TWRP 2.6.3.0 or older CWM
Link for the RUU http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
I will get there said:
Thanks @Ivanovic
I have since moved on a little further, i have now managed to push a rom via sideload, when i then go to flash it says:
Updating partion details....
E:unable to open zip file.
Error flashing zip /sdcard/sideload.zip
updating partition..details
failed
do you know a workaround this, if not could you direct me to a page with both hboot 1.44 and the RUU please
Click to expand...
Click to collapse
http://www.htc1guru.com/downloads/ruu-file-downloads/
I had to use the exe version to get it working when I had a similar issue.
Sent from my One using Tapatalk
Yes there is a fix. Install stock recovery. Go to bootloader and select factory reset. It will go to stock recovery and do it's thing and should go into a Bootloop . install custom recovery you should be good
Hi All
Just a quick note, to say all back up and running, thanks for all the respondants who helped.
I wanted add how i got it up and running, so if anyone has similar issues they can use it:
I believe the biggest culprit was the newest Firmware and TWRO 2.3.3.3 in which it did not want to load.
I downgraded by Hboot to firmware 3.xxx and then flashed TWRP 2.3.3.0 and it let me in instead of kicking me out to a bootloop.
I then had access to ADB sideload, which did not work for me in the 1st instance that led me to my problem, This i believe was due to not having the lastest SDK.(upgrade this).
Make sure the Rom you are pushing works well for that downgraded firmware i.e. a solid 4.3 based rom in my case.
Also to note I wiped my external SD card and was unable to mount this to flash, let TWRP sort this by doing a factory reset prior to flashing.
Hope this helps anyone who experienced similar symptoms to me.
Hi,
I was gonna flash the ROM Android Revolution HD Sense when i came from CM11. I did wipe/factory reset and after that installed the ARHD but when i did the reboot i got stuck at the HTC logo and now i can´t acess cwm recovery. when i press power+volume down i see the recovery logo and it says swipe to right to enter but after that im stuck at HTC logo again.....
Plz help me
Karlzzzon said:
cwm recovery
Click to expand...
Click to collapse
Like sais in the ARHD thread the rom MUST be flashed with TWRP 2.6.3.3 or higher.
Android Revolution HD 53.0
--- MD5 Checksum: DF9854F79C6E6928BEFD6EC43EC9F4A5 ---
You need TRWP 2.6.3.3 recovery!
Flashing KitKat F.A.Q. - click here
Click to expand...
Click to collapse
alray said:
Like sais in the ARHD thread the rom MUST be flashed with TWRP 2.6.3.3 or higher.
Click to expand...
Click to collapse
It depends on the ARHD version.
As far as i know you can flash the v31.6 with cwm. Or am i wrong?
@Karlzzzon: Which version do you want to flash? 31.6, 53 or 60?
You need to do
fastboot erase cache
That will allow you to get into recovery.
R34LY said:
It depends on the ARHD version.
As far as i know you can flash the v31.6 with cwm. Or am i wrong?
@Karlzzzon: Which version do you want to flash? 31.6, 53 or 60?
Click to expand...
Click to collapse
correct Arhd versions with android 4.4+ require twrp 2.6.3.3 not arhd 31.6
Same issue...
Hi guys,
I stupidly did exactly the same mistake as @Karlzzzon... I'm currently stuck with the HTC logo and have no access to the recovery.
I understood from your previous answers that I should have flashed with TWRP 2.6.3.3, which I'd like to do now. But how am I supposed to do that considering that I can't get to the recovery ?
Thanks in advance for your answers !
VieuMa
VieuMa said:
Hi guys,
I stupidly did exactly the same mistake as @Karlzzzon... I'm currently stuck with the HTC logo and have no access to the recovery.
I understood from your previous answers that I should have flashed with TWRP 2.6.3.3, which I'd like to do now. But how am I supposed to do that considering that I can't get to the recovery ?
Thanks in advance for your answers !
VieuMa
Click to expand...
Click to collapse
flash twrp recovery
erase cache
boot recovery
install the rom
alray said:
flash twrp recovery
erase cache
boot recovery
install the rom
Click to expand...
Click to collapse
Thanks @alray for your quick answer !
I just have one more question : how can I flash TWRP without using the recovery ?
VieuMa said:
Thanks @alray for your quick answer !
I just have one more question : how can I flash TWRP without using the recovery ?
Click to expand...
Click to collapse
even if its possible to flash a recovery.zip directly from recovery, the usual way to flash it is from fastboot using a recovery.img
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
assuming your phone is a M7_UL or M7_U:
download twrp 2.6.3.3 from here (make sure MD5 match 72067aefb69541d40e8420d7aa46408d) and save it to your adb folder then:
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
your rom.zip should still be there so just install it again
if not
adb push it to your /sdcard
alray said:
even if its possible to flash a recovery.zip directly from recovery, the usual way to flash it is from fastboot using a recovery.img
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
assuming your phone is a M7_UL or M7_U:
download twrp 2.6.3.3 from here (make sure MD5 match 72067aefb69541d40e8420d7aa46408d) and save it to your adb folder then:
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
your rom.zip should still be there so just install it again
if not
adb push it to your /sdcard
Click to expand...
Click to collapse
Alright, I didn't remember using fastboot in the past, only adb.
Worked like a charm, thanks a LOT for your time and your complete answers !
VieuMa said:
Alright, I didn't remember using fastboot in the past, only adb.
Worked like a charm, thanks a LOT for your time and your complete answers !
Click to expand...
Click to collapse
np, happy flashing
So I'm having a hard time here LOL.
I come from a soft brick and after some issues I got my m7_ul back to stock, which is great as it is alive again Now I want to flash a decent ROM, I have thought about ViperOne. However my TWRP 2.7.1.1 seems corrupted, I can't even enter it and I have had a couple of scary moments as the phone won't boot to system. Finally pressing the power button for like 30 seconds did the job and it booted to system. Stock ROM sucks but it is better than a brick haha.
My phone is international m7_ul, my HBOOT is 1.44 and I have Tampered and Unlocked labels, not sure what should I do exactly. Just want the basic strategy to get my custom ROM running and later on I will add a soundmod but that should be easier.
Dani84 said:
So I'm having a hard time here LOL.
I come from a soft brick and after some issues I got my m7_ul back to stock, which is great as it is alive again Now I want to flash a decent ROM, I have thought about ViperOne. However my TWRP 2.7.1.1 seems corrupted, I can't even enter it and I have had a couple of scary moments as the phone won't boot to system. Finally pressing the power button for like 30 seconds did the job and it booted to system. Stock ROM sucks but it is better than a brick haha.
My phone is international m7_ul, my HBOOT is 1.44 and I have Tampered and Unlocked labels, not sure what should I do exactly. Just want the basic strategy to get my custom ROM running and later on I will add a soundmod but that should be easier.
Click to expand...
Click to collapse
If you returned to stock you have re flash custom recovery
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7ul
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
Suggest re-download, the re-flash TWRP, flash in fastboot fastboot flash recovery <name of recovery.img> and then fastboot erase cache, this should allow you to enter recovery.
wow that was fast thanks, problem solved, I'm now running TWRP 2.6.3.4
so now I just place the desired ROM flash it, wipe dalvik and cache, and voila, right? will try to find if viperone is compatible with m7ul, I had a problem with ARHD 71.1
Dani84 said:
wow that was fast thanks, problem solved, I'm now running TWRP 2.6.3.4
so now I just place the desired ROM flash it, wipe dalvik and cache, and voila, right? will try to find if viperone is compatible with m7ul, I had a problem with ARHD 71.1
Click to expand...
Click to collapse
They will both work great with your current recovery installed
clsA said:
If you returned to stock you have re flash custom recovery
Click to expand...
Click to collapse
Hello I flashed twrp recovery through twrp manager app which showed an error but after pressing reboot to twrp it did but I got a red triangle error sign his can I fix it?
CostasV23 said:
Hello I flashed twrp recovery through twrp manager app which showed an error but after pressing reboot to twrp it did but I got a red triangle error sign his can I fix it?
Click to expand...
Click to collapse
simply flash twrp using fastboot. Easy, fast and reliable.
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
alray said:
simply flash twrp using fastboot. Easy, fast and reliable.
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
The thing that did the trick for me was downloading the .img file from the twrp site and flashing with flashify after that it worked . thanks for your time
CostasV23 said:
The thing that did the trick for me was downloading the .img file from the twrp site and flashing with flashify after that it worked . thanks for your time
Click to expand...
Click to collapse
Yep, thats a way to do it, I prefer to use fastboot but if you don't have a computer to work with then its a good alternative. :good:
CostasV23 said:
Hello I flashed twrp recovery through twrp manager app which showed an error but after pressing reboot to twrp it did but I got a red triangle error sign his can I fix it?
Click to expand...
Click to collapse
alray said:
simply flash twrp using fastboot. Easy, fast and reliable.
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
wholly smokes this thread is 2 years old how did it come back ? I feel like Ive been resurrected
clsA said:
wholly smokes this thread is 2 years old how did it come back ? I feel like Ive been resurrected
Click to expand...
Click to collapse
That's my bad actually . I was searching how to install a recovery after the red triangle for the s4 mini plus which is a completely different device and it wasn't until later I realised this thread is for the m7 and I couldn't delete it afterwards so my bad yeah
I have a soft brick. I cannot make the phone to boot.
My cid is vodap001 uk, 2.24.161.1 ,hboot 1.54
The phone is on bootlloop and I cannot access recovery but I can access fastboot.
I flashed all the recoveries twpr , cwm , stock but I cannot get into recovery ,it also loops
The phone in only unlocked ,it is still s-on.
Someone please upload the 2.24.161.1 vodaphone ruu because I cannot find it anywhere in xda the htc1guru site is down and all the links are also down.
I would be very greatful if someone could help.
seilogeo said:
I have a soft brick. I cannot make the phone to boot.
My cid is vodap001 uk, 2.24.161.1 ,hboot 1.54
The phone is on bootlloop and I cannot access recovery but I can access fastboot.
I flashed all the recoveries twpr , cwm , stock but I cannot get into recovery ,it also loops
The phone in only unlocked ,it is still s-on.
Someone please upload the 2.24.161.1 vodaphone ruu because I cannot find it anywhere in xda the htc1guru site is down and all the links are also down.
I would be very greatful if someone could help.
Click to expand...
Click to collapse
here you go >> http://www.thehtcguru.com/GuruResets/Guru_Reset_M7_2.24.161.1.zip
Use TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Thanks a lot for that.
I started downloading , I will keep you updated!!
Still I cannot boot into recovery, it is very strange .
Can I flash this zip with fastboot or not?
seilogeo said:
Thanks a lot for that.
I started downloading , I will keep you updated!!
Still I cannot boot into recovery, it is very strange .
Can I flash this zip with fastboot or not?
Click to expand...
Click to collapse
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
then boot in recovery, push the rom to your phone and install it.
You can't flash a rom from fastboot, it must be done from recovery.
alray said:
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
then boot in recovery, push the rom to your phone and install it.
You can't flash a rom from fastboot, it must be done from recovery.
Click to expand...
Click to collapse
This is my biggest problem I cannot boot into recovery, it bootloops after 15 seconds I choose it in the fastboot menu. I even tried to (fastboot boot recovery. img) and it also bootloops.
I cannot boot into android also, I am in big trouble. Any ideas??
seilogeo said:
This is my biggest problem I cannot boot into recovery, it bootloops after 15 seconds I choose it in the fastboot menu. I even tried to (fastboot boot recovery. img) and it also bootloops.
I cannot boot into android also, I am in big trouble. Any ideas??
Click to expand...
Click to collapse
First are you sure you have flashed the recovery and then erased cache and rebooted before attempting to boot in recovery mode?
Have you checked the MD5 value of your recovery before flashing?
"fastboot boot recovery.img" was only available on hboot 1.44
alray said:
First are you sure you have flashed the recovery and then erased cache and rebooted before attempting to boot in recovery mode?
Have you checked the MD5 value of your recovery before flashing?
"fastboot boot recovery.img" was only available on hboot 1.44
Click to expand...
Click to collapse
I literally tried all of the recovery images I found for that device , I always check the md5 , and erase cache.
It looks like it is finishes flashing properly with no errors , but when I try to boot into recovery it bootloops.
Ok I found it no worries
If someone can help me find the ruu for vodap001 x. xx. 161.x would be my savior right now