[Q] Native tethering on VZW Non dev Moto X - rooted - Moto X Q&A

I have tried CJ's method, but I keep losing it and the subscription check takes over again. I cannot do the write protection hack (if that has anything to do with this, not sure) because the script fails when searching for ADB for whatever reason and I use ADB all the time.
I just want to be able to tether with my unlimited data. Any ideas?

tluley51 said:
I have tried CJ's method, but I keep losing it and the subscription check takes over again. I cannot do the write protection hack (if that has anything to do with this, not sure) because the script fails when searching for ADB for whatever reason and I use ADB all the time.
I just want to be able to tether with my unlimited data. Any ideas?
Click to expand...
Click to collapse
i was able to successfully pull framework-res.apk and take out the entitlement check, but i ran into problems recompiling it so i'm not comfortable posting it yet until those are resolved. the method for doing it is out there (on this forum actually somewhere but i don't have the link in front of me), but i ran into a few things. here's the post i made about trying to resolve those issues...
http://forum.xda-developers.com/showpost.php?p=49260289&postcount=7
everything SEEMS to work so far, including native tethering without the entitlement check (knock on wood), but i haven't gotten to give it any real good testing and the framework file is about 3mb smaller than the original. not sure if that's good, bad or indifferent...

If you go into the bootloader, volume down to recovery, press volume up to select it, Android will reboot without write protection enabled and THEN do CJ's method, it works!! Courtesy of Coderedpl

Related

[GUIDE] Changing your Bluetooth/Wi-Fi MAC Address

Hi guys
Well, I had an Atrix for a few days, but had some issues with AT&T and had to return it and deal with some customer service issues before I can re-purchase the device. I didn't let that slow me down though
While I had it, I made a few dumps of the NAND, and have been working on disassembling things. Thanks to the help from a number of great people on IRC (#xda-devs irc.freenode.net) I have been able to successfully change the Bluetooth and Wi-Fi MAC addresses, and discovered a way to write to the flash, bypassing the bootloader security.
The full writeup can be found at pocketnow.com
I will be posting more info about the bootloader bypass as soon as I get it 100% working, right now we are able to write data directly to the NAND, bypassing bootloader security, and also provide a false signature, allowing the device to boot. However there are some remaining issues (a custom kernel that was flashed to the device failed to boot properly) - stay tuned
You the man, thanks for the efforts !
Sweeeet!
Wonderful work!
Excellent, can't wait to see the end result. Hopefully custom kernels and ROMs will be coming soon.
Devs you guys are amazing! Thank you for the hard work that is put into all this! I know the challange is fun for you all, but it really helps us non dev ppl out a lot!
Sent from my MB860 using XDA App
nicely done Da-G.... great work as always glad to see you again and i hope to continue using your work as i did back in old winmo cooking !!!
quick question, is there really a reason why to change the bluetooth/wifi MAC drivers??? are there any benefits or basically just the same exact reasons when you do it on pc's
Main reason to change MAC address is to be able to join Wi-Fi networks that have whitelisting.
You could also use it to simplify device administration on your network.
Beyond that I can also imagine a few black-hat reasons to do it
Atrix is one of the few smartphones that can pull it off easily though, others I am aware of are the LG Optimus One and the SGS series (although it's not so easy on SGS)
There are plenty of other interesting datas in /pds, it is the device provisioning partition (NVRAM) and is equivalent to /efs on the i9000/Captivate (which is the last device I used, so easy for me to compare with)
Careful messing with it though, on the Captivate changing the wrong bit would kill your cellular radio until you restored an EFS backup, I suspect the same danger is here with the Atrix too! And we don't have a quick way to restore a PDS backup yet like with odin on SGS (although I am hot on the heels of a method to do so)
Omfg I'm excited! If this device gets real ROMs an even custom kernels, its going to be an even more amazing device
Sent from my MB860 using XDA Premium App
i'm exited about the bootloader bypass, i thought the firmware would do a complete checksum of it, so if it's partial then we should be able to find out exactly what gets checked.
i'm curious to see if you have been able to find something regarding sim unlock, just like the sgs was holding the lock very easily changeable with a simple hex editor. i bought the code already but maybe other people will get lucky
I've asked for a backup of /pds prior to and after locking over in the general forum, hopefully a few people can send those my way. I suspect a good hard look at that will reveal the location and provide an easy unlock method (I think I located it already, but as /pds is not restored via flashing the leaked SBF, i'm loathe to have someone else try it in fear of brickage)
I'll hammer it out once I get my device back in hand, whenever AT&T decides to allow me to purcahse
Da_G said:
I've asked for a backup of /pds prior and after locking over in the general forum, hopefully a few people can send those my way. I suspect a good hard look at that will reveal the location and provide an easy unlock method (I think I located it already, but as /pds is not restored via flashing the leaked SBF, i'm loathe to have someone else try it in fear of brickage)
I'll hammer it out once I get my device back in hand, whenever AT&T decides to allow me to purcahse
Click to expand...
Click to collapse
i will do it, but i am getting a permission denied.
Code:
C:\Users\fjleon\Desktop\android-sdk-windows\platform-tools>adb shell tar zcvpf /
sdcard-ext/pds-backup.tar.gz /pds/
tar: can't open '/sdcard-ext/pds-backup.tar.gz': Permission denied
i tried adb shell su and accepted super user on the phone, but i still cannot do it
wow bypass= custom roms...... this would be ingenious hope u get it working....
how does rsd lite 5 flashing work??? it seems to create an image and then re sign it.... would backtracking and try to use the same method work?
@franciscojavierleon:
Make sure you don't have usb internal/sd storage mounted when you issue the command, or the sd card will be unaccessible from device
@ahjdmarchi:
I didn't study the program too much yet. I'll look to that if the current method i'm working on proves to be a failure
Da_G said:
@franciscojavierleon:
Make sure you don't have usb internal/sd storage mounted when you issue the command, or the sd card will be unaccessible from device
@ahjdmarchi:
I didn't study the program too much yet. I'll look to that if the current method i'm working on proves to be a failure
Click to expand...
Click to collapse
heres a tattoo that i have on my chest
"failure is not an option" good luck brudda hope all turns well
Da_G said:
@franciscojavierleon:
Make sure you don't have usb internal/sd storage mounted when you issue the command, or the sd card will be unaccessible from device
Click to expand...
Click to collapse
i unmounted it and tried again and still get the same error. i killed root explorer first since i had it open and no dice
@franciscojavierleon:
Try this instead.
Code:
adb shell tar zcvpf /data/local/tmp/pds-backup.tar.gz /pds/
adb pull /data/local/tmp/pds-backup.tar.gz
adb shell rm /data/local/tmp/pds-backup.tar.gz
RadioComm
You really need to take a look at RadioComm if you haven't yet.
The BT MAC address can be edited directly in the NVM on all Motorola devices.
On CDMA chipset devices it is located in seem 01bf record 0001 bytes 0006 and there is also a module and special set of TCI commands for managing this called HOB restore.
There are also flags set in the firmware for whether the HOB is verified during the flash cycle or not.
just an FYI!
@cellzealot:
Checked out RadioComm already, but none of the commands work for Atrix. Have you tried it? Perhaps you have a more updated version?
Edited. Nevermind just saw you needed it before unlock as well. I've got my PDS folder from my unlocked phone if you need it (not sure)
i should get my unlock between today and tomorrow, so with my locked pds backup i will do a diff to see if anything gets changed at all.

[SCRIPT] GladRoot v4.3 (Bell 0.37.4, AT&T 1.26/1.52/1.57/1.83 Supported)

Note to all users: This thread is now closed. I will no longer be updating GladRoot as there are more reliable and simpler methods for obtaining root on the newer firmwares. Support can still be found through PM for the older firmware versions.​Note to all users on non-AT&T/Bell devicesThis is currently untested on anything but AT&T and Bell phones. You can run this on any phone, and at the very worst, it just won't work. There's almost 0 chance you will harm your phone by running this, so feel free to try. Please report back what firmware version you tried it on, and if it worked or not and I'll update the first post here to reflect. I don't have any device but an AT&T Atrix so I can't test any of the other versions myself, I need your help!​GladRoot v4.3 (AT&T 1.83 Update Supported - READ DIRECTIONS)
In the interest of cleaning things up and putting all the current information into one place, with links to everything you'll need to get this working.
Basically, there's a ton of misinformation floating around about current root methods. This is your one stop shop for all your root needs. To explain, the SuperOneClick method installs busybox a second time. The Atrix already has busybox installed, so there's no need to install a duplicate. This can cause issues with other mods. GladRoot will take care of everything SuperOneClick did. I've contacted the developer to see if there's a way around this.
Start Here
If you have an AT&T Atrix and want to update to 1.57/1.83 with root, follow the first set of instructions.
If you have a Bell Atrix or an AT&T Atrix on 1.26 or 1.52 and just want to root, go to the second set of instructions.
Please, please, PLEASE, read the whole first post before asking questions. Chances are your question is already covered in the directions.
If you have any features requests or notice any bugs, please PM me, I might miss them in this thread.
To unroot, just run unroot.bat
Note to users seeing "Unable to detect device" error: Disable USB debugging, and turn it back on. Make sure your connection type is set to None. If you need the drivers, they are available here: 32-bit Drivers and 64-bit Drivers
Little bit of additional info here:
This will root your phone. There is no need to run aRoot before this, and you should NOT be running SuperOneClick anymore.
This has options to enable sideloading and the tethering APN. Enabling sideloading will not add an Unknown Sources checkbox, it will just enable it. I don't see any reason for the need to disable this, so unless someone can make a case for the checkbox (that makes sense for users), it will remain this way.
Unlike v1, the scripts are fully automated. You need only click "allow" to superuser when prompted for certain steps.
If you are already on 1.57/1.83 and do not have root, you MUST flash back to 1.26 for this to work. NO EXCEPTIONS.​
Installation instructions: 1.26 to 1.57/1.83
Read the directions.
Read the directions again.
Read the directions a third time. If you do not understand a step, ASK before starting.
Download the script
Extract the GladRoot folder and files to C:\. Do not install anywhere else. Having it inside a folder with a space will cause the script to FAIL.
Make sure your device is 1.2.6 and is not running any mods, I recommend a fresh SBF flash of 1.2.6. Download links and installation instructions here
Enable USB debugging (Settings -> Applications -> Development).
Connect your phone (I recommend setting USB Connection to 'None').
Run gladroot.bat and follow the on-screen directions (If you're using Windows 7, run as admin by holding down control and double-clicking).
Verify that there are no errors before updating.
Go to Settings -> About phone -> System updates
Follow the on-screen instructions. First download the update (you will need a Wi-Fi connection for this), then it will prompt you to install.
The update will reboot the device and install itself. If this part fails it's because you are not on stock 1.2.6 firmware. Start over and read the directions.
When it boots back up, verify USB debugging is still on. Some users report that disabling and re-enabling USB debugging solves a few issues with the script detecting your device (Settings -> Applications -> Development).
Run afterupdate.bat (If you're using Windows 7, run as admin by holding down control and double-clicking).
Make sure you allow the superuser request on your phone or it WILL fail.
All done! Enjoy your rooted Atrix on 1.57/1.83!
​Screenshots**REMOVED FOR NOW UNTIL I GET A CHANCE TO UPDATE**​Installation instructions: 1.26, 1.52 and Bell Atrix
Read the directions.
Read the directions again.
Read the directions a third time. If you do not understand a step, ASK before starting.
Download the script
Extract the GladRoot folder and files to C:\. Do not install anywhere else. Having it inside a folder with a space will cause the script to FAIL.
Make sure your device is the correct version. Go to Settings -> About phone -> Build number and make sure it matches one of the following:
OLYFR_U4_1.2.6
OLYFR_U4_1.5.2
OLYLA_U4_0.37.4
If you need to flash an SBF first, Download links and installation instructions here.
Enable USB debugging (Settings -> Applications -> Development).
Connect your phone (I recommend setting USB Connection to 'None').
Run gladroot.bat and follow the on-screen directions.(If you're using Windows 7, run as admin by holding down control and double-clicking).
When you get to the step that asks if you're updating to 1.57, just say no.
Verify that there are no errors.
All done! Enjoy your rooted Atrix!
​DISCLAIMER
I am not responsible if this bricks your phone or if it doesn't work properly for you. I've done everything I can to ensure smooth execution.
If you have any issues, feel free to PM me, reply to this thread, or come find me on IRC (I'm Fenrir or fen|works on IRC)​Special Thanks
Sogarth for adb wizardry, shawnbuck for the concept and getting the ball moving, designgears for the initial aRoot script method, and everyone on XDA and IRC who helped contribute and test.​Changelog
Version 4.3
Cleaned up script a tiny bit
Added textual support for 1.83 (the method hasn't changed, it's always worked)
Version 4.2
Added Uknown Sources checkbox to sideloading, as well as enabling it.
Added unroot script.
Version 4.1
Fixed a few minor aesthetic errors in the script
Version 4
Added a pause after the superuser request so if it fails, users can read the output.
Started mapping out log process for error catching.
Removed abd kill-server from the beginning of the file as I think it might be causing problems on slower machines.
Version 3
Removed option to root, it just roots. This will not harm your phone if you're already rooted.
Added support to root all devices, including Bell Atrix.
Cleaned up and improved script.
Changed name from Root v2 to GladRoot (Which is Root v3)
Version 2
Massive improvements to deployment script
Removed need to manually enter commands
Version 1
Initial Release
​
I love you guys lol!
So will this method (or the idea behind it) work for future updates (like the supposed ones for HSUPA, voice quality and one day eventually maybe gingerbread?)
Or do we have no idea about those?
Vigneshd said:
I love you guys lol!
So will this method (or the idea behind it) work for future updates (like the supposed ones for HSUPA, voice quality and one day eventually maybe gingerbread?)
Or do we have no idea about those?
Click to expand...
Click to collapse
I would assume so, unless Moto closes this hole? Not sure if this is a root exploit like psneuter or not.
Also flashing my phone 1.2.6 and will attempt this, will post back my results
So do this version allow sideloading?
awww yeahhh
PixoNova said:
I would assume so, unless Moto closes this hole? Not sure if this is a root exploit like psneuter or not.
Also flashing my phone 1.2.6 and will attempt this, will post back my results
Click to expand...
Click to collapse
Unfortunately, it is possible to close this hole, but I don't think moto is going to get it for a little while.
plmiller0905 said:
So do this version allow sideloading?
Click to expand...
Click to collapse
i assume so. i'm able to sideload
After failing with the previous version, I failed again with this version. I get the screen shot below every time.
I installed JDK and SDK. I did aroot. I rebooted Atrix and my PC. I tried in None and Mass Storage. The Atrix is recognized by my PC as it is listed under Computer and connects with Media Sync. I put the new retainroot folder in C:\.
Nothing works.
Have I missed something?
Any ideas?
drjim said:
After failing with the previous version, I failed again with this version. I get the screen shot below every time.
I installed JDK and SDK. I did aroot. I rebooted Atrix and my PC. I tried in None and Mass Storage. The Atrix is recognized by my PC as it is listed under Computer and connects with Media Sync.
Nothing works.
Have I missed something?
Any ideas?
Click to expand...
Click to collapse
open command prompt and type:
Code:
adb devices
What does it return?
drjim said:
After failing with the previous version, I failed again with this version. I get the screen shot below every time.
I installed JDK and SDK. I did aroot. I rebooted Atrix and my PC. I tried in None and Mass Storage. The Atrix is recognized by my PC as it is listed under Computer and connects with Media Sync.
Nothing works.
Have I missed something?
Any ideas?
Click to expand...
Click to collapse
USB debugging on?
USB mode set as None?
Ririal said:
open command prompt and type:
Code:
adb devices
What does it return?
Click to expand...
Click to collapse
I'm in C:\Users\My Name>
Is that the directory I should be in? If not, which and how to get there (I'm not great with cmd)?
shawnbuck said:
Unfortunately, it is possible to close this hole, but I don't think moto is going to get it for a little while.
Click to expand...
Click to collapse
So is this a hole that allows us to exploit another hole?
s0dhi said:
USB debugging on?
USB mode set as None?
Click to expand...
Click to collapse
Yes to both.
drjim said:
I'm in C:\Users\My Name>
Is that the directory I should be in? If not, which and how to get there (I'm not great with cmd)?
Click to expand...
Click to collapse
I changed directory to C:\ in cmd and typed in adb devices. Its response: List of devices attached.
Only thing I haven't done is flash SBF (whatever that is). But I'm dling it now...along with RSDlite (whatever that is).
Any ideas why I got all the way to the second command prompt with permission denied? I never got the super user prompt on my phone. Can I still put the phone in debug mode and rerun afterupdate.bat to re-root?
PixoNova said:
So is this a hole that allows us to exploit another hole?
Click to expand...
Click to collapse
This isn't quite a hole, just a little magic-show type trickery really.
tdamocles said:
Any ideas why I got all the way to the second command prompt with permission denied? I never got the super user prompt on my phone. Can I still put the phone in debug mode and rerun afterupdate.bat to re-root?
Click to expand...
Click to collapse
What do you mean second command prompt?
Failed backup?
OK, I'm on stock 1.2.6, said yes to already rooted and yes to side load and no to tether. It starts and says pushing backupsu.sh... then retval = and backup failed to execute properly. What am I doing wrong? I have developer on and usb = none. Can't seem to get it to work...
when i run beforeupdate i get backup failed to execute properly
am i missing something?

SOLVED -- [XT860] Softbricked, Help...

So I'm a bit of genius and decided I'd try to fully fix my 99% functional phone and have now made it so it won't boot into home screen... I believe I corrupted blur-services.apk and/or blurcontacts.apk, so I get greeted with a series of crash screens.
What I did? I copied over some Bell XT860 system files (including blur-services.apk) from a system dump in Root Explorer, which caused a crash in the middle of copying. After rebooting the phone, it won't properly go into home screen. I tried a system recovery with no luck, oops.
So I'm hoping/assuming that copying over blur-services.apk properly through ADB might solve the issue, but I can't get into ADB on my phone. I've tried using bp-tools & psouza's tool for temp ADB rooting, with no luck -- it won't pickup the connection, even though my phone's storage is available on my computer and clearly connects. Granted, I might be missing a step somewhere...
If someone could guide me into getting into ADB, I can push the blur-services files properly and hopefully regain control over my phone again...
I must say... if I can get this phone operational again, I will stop messing with it!
Two issues...
1) I could use a non-corrupted copy of each of these files [along with their respective odex files]...
2) I can't get into ADB on my phone. I've tried using bp-tools & psouza's tool for temp ADB rooting, with no luck -- it won't pickup the connection, even though my phone's storage is available on my computer and clearly connects.
I must say... if I can get this phone operational again, I will stop messing with it!
Update:
Luckily for me, I was still able to access my gmail and launched Android Market from there. This allowed me to download Go Launcher, GO Contacts, etc. and at least restore functioning to my phone. Most importantly, this enabled me to check off USB debugging (which I lost when I foolishly reset my phone).
So now I've got a semi-functional phone that gives me error messages at least every 30 seconds about one of the .com applications closing.
However, there is hope that I can get her fully functional since I can now obtain ADB access!
---------- Post added at 02:08 AM ---------- Previous post was at 01:44 AM ----------
Sweet, after being able to check USB debugging, I was able to save my self again using psouza4's tools and guidance.... I really have no idea where noobs like me would be without his help!
Main Lessons:
1) Don't play with your phone too much without a proper SBF
2) If you're like me and can't resist, DO NOT FACTORY RESET YOUR PHONE. This only makes the problem worse.

.621 Root Method - For new OTA Update

***Root method for .621 update***
THIS IS FOR USERS WITH THE .621 UPDATE ONLY. IF YOU HAVE NOT UPDATED DO NOT USE THIS METHOD.
*****DO NOT USE WINDOWS*****DO NOT USE RSDLITE*****
Instructs are made by Skelente
1.) Download the latest Ubuntu iso for your system. Most processors these days are 64 bit, but if you're running on an older computer or do not know if you have a 32 or 64 bit processor I'd recommend doing 32 bit just to be safe (64 bit processors can run both 32 and 64 bit distributions, but 32 bit systems cannot run 64 bit distributions.) Side note: you can download other distributions, but if you do you will not be able to create the persistent drive using the USB method. It should also be noted that some older systems cannot boot from USB, most newer systems (post 2000/2001 IIRC) can boot from USB, however you should consult Google to verify for your system.
2.) Burn the iso:
2.a If you have a cd burner and blank disc, this is the easiest method but, again, you will not have a persistent drive you will just have a Live CD. Use an iso burner to burn to cd, then skip to step 3a.
2.b If you do not have a burner, a blank disc (or don't feel like wasting a DVD disc) but have a free USB drive (with at least 2 GB of memory, bit overkill but it has to be big enough to hold the iso + changes + the persistent "drive") then I recommend downloading either unetbootin or universal USB installer. Go to either web site and follow their instructions. If you use Ubuntu, you'll have the option of creating a persistent drive, which is basically a fake-partition that allows you to save files to when you reboot Linux after running this Live USB. I would recommend using a persistent size of at least 200 mb so we can save the SBF file and sbf_flash. If you created a persistent drive go to step 4. If you opted out of this, skip to step 4.
3.a So you have a Live CD now. If you have a spare flash drive, load up the 604 SBF and sbf_flash. Either way, you'll need to proceed to booting into linux, go to step 4.
3.b Once the respective application has finished, copy the SBF and sbf_flash file to the persistent drive listed in windows.
4. Now we need to boot from your Live image. Restart your computer. When your computer is booting up it should give you two options, "Enter BIOS" and "Select Boot Order" or similar. For my Lenovo Laptop, I can hit F12 to change the boot order, and from there I can select my USB port and it'll boot from there. If you do not see a boot order option, you will need to go into your bios and change the boot order manually. Again, you will need consult Google for this as the menu selections vary by system. It really isn't that hard to figure out if you go through the menus, but I strongly, strongly, strongly recommend and encourage you to google your motherboard's manual to verify what you need to change if you don't know what you are doing. You are responsible for any changes you make on your system. Your BIOS is crucial for your system to function properly. Once you have found where to change your boot order, select the respective drive (USB, or your CD/DVD drive). These will be listed by the manufacture name (so SamsungXXXX for a Samsung drive or PNYXXXX if you're using a PNY usb stick.)
5. When Ubuntu boots up, it'll give you an option to run "Live" from the CD/USB. Select this option. Installing to your hard drive could mess up your current OS install, and I'm not going to get into partitioning here. Once you've gotten into Ubuntu, select "Dash Home" in the upper left hand corner, and then type terminal in the search box. Click terminal, then open it up.
6. Now you'll need to get to where ever you have the SBF and sbf_flash stored through the terminal. If you chose to use the boot cd, and did not have an available flash drive, you will need to download the SBF from here, as well as sbf_flash and then extract them to the same folder. The default is "Downloads" and I recommend just extracting them to that directory for simplicity.
6.a If you had to download the SBF/sbf_flash, getting there through terminal is rather easy. All you'll need to do is type these commands into the terminal:
cd Downloads
chmod +x sbf_flash
./sbf_flash mb809-2.3.5.sbf
And then let the program do it's work. When it's done, go to step 7.
6.b If you already copied the required files to a USB drive, we need to get there through terminal. Type these commands:
cd /
cd /media/
ls (This command will list all the drives connected to your system, cdrom, usb, etc. If you used the Universal USB installer it will list the USB drive as "PENDRIVE", I'm not sure what the default is for Unetbootin but you should be able to figure it out and if you just used a spare device it could be completely random.)
cd drivename (obvioiusly this will vary based on the USB method, for me its "cd PENDRIVE"
If your files were just on the main drive, you don't need to do anything else but the following commands. If you put them in another folder, you will need to do "cd foldername" without the quotes obviously. When you're in the directory with both the SBF and sbf_flash you will need to do these commands (again, ignoring the '-'):
chmod +x sbf_flash
./sbf_flash mb809-2.3.5.sbf
And then let the program do it's work. When it's done, go to step 7.
7.) After sbf_flash is done, you'll need to restart your computer. Its recommended you remove your boot media (cd or usb drive) so that Windows can boot normally. If you changed the boot order in bios you will need to change it back to what it was before, otherwise whenever you have a CD/USB stick plugged in your computer will automatically try to boot from it, and get pissy if it can't boot from the media.
8.) Once you're back in windows you'll need to run the zergrushv4 root method. From there you can do whatever you want. You still cannot SBF to previous versions (602 or 605) and you cannot run Froyo roms.
Downloads:
sbf_flash
SBF File & root tools
*HELP*
If you flashed with RSD Lite and have no data here is your options...
Flash stock .621 sbf and...
Switch devices on your account to reactivate the data
or
Call verizon to have them reporvision your data...
Once you are on the milestone system you can flash a custom rom.
You must SBF in Linux using sbf_flash, otherwise .604's radio will flash over .621's and your phone will no longer be able to take or place phone calls.
Edit: It may just be data, instead of phone capabilities. But still, flashing in Linux is much easier than having to spend time with Verizon's incompetent phone operators.
Sent from my Transformer TF101 using Tapatalk
If you SBF'd using RSD Lite, you flashed the 605 baseband over the 621. I didn't think this would mess up texts/phone calls but just your data connection, but correct me if I'm wrong I'm just going from memory (I had a dx2, just been watching the threads.) This was a big problem for the people over at rootz and they had a few different tactics on how to solve it. Some were able to call VZW and ask the tech support to "re-provision their data" although that was with mixed results (it depended who ya got on the phone, some people had no luck and other people had their data start back up no problems.) You would need to sbf back to 621 and call from a separate phone, however. Another user (skreelink) theorized that it was merely the AUTH code that was being messed up, and suggested that (for those with a secondary smart phone) you just go onto VZW.com, switch out phones for your number, wait 15 minutes, then go back to the website and switch back to your DX. I'm not sure if anyone has had any success with the latter but I know the former worked for a handful of people (with others getting tech support who had no idea what they were talking about.) If you call and don't get someone knowledgeable, I'd just cross your fingers and call back another time and hope you get someone different.
link not working
anyone have updated link that works to download this?
yea i learned about the radio the hard way, but i found a quick fix... maybe...
If you flashed with windows and now cant get data if you have a old smartphone that is compatible with you plan just go online and switch devices and then switch them back. Saves from having to call verizon But some people may not have a extra
I am probably one of those people who will also need to use this alternative root method but I have a question -
I have been recently acquainted to this dilemma on my "new" Droid X. I mistakenly started downloading the .621 update on my Droid X . I quickly realized what was happening and pulled the battery before the download was complete. (data disabled on phone) . I turned off my router. I reinstalled the battery and turned off all of the data on the phone. I tried clearing the cache but get a message the triangle that it will try to download it again. I pulled the battery and do not plan on powering up the phone with any data connection until I can get some clarification on what to do . The phone has little value to me if it can't be rooted . Is there anyway to stop the train at this point and go back to .605 ( i believe that was the previous one) . - Thanks
bamx2 said:
I am probably one of those people who will also need to use this alternative root method but I have question -
I have been recently acquainted to this dilemma on my "new" Droid X. I mistakenly started the downloading the .621 update on my Droid X . I quickly realized what was happening and pulled the battery before the download was complete. (data disabled on phone) . I turned of my router. I reinstalled the battery and turned off all of the data on the phone. I tried clearing the cache but get a message the triangle that it will try to download it again. I pulled the battery and do not plan on powering up the phone with any data connection until I can get some clarification on what to do . The phone has little value to me if it can't be rooted . Is there anyway to stop the train at this point and go back to .605 ( i believe that was the previous one) . - Thanks
Click to expand...
Click to collapse
If you disabled the download you are still on .605.
Turn your phone on, quickly root it with Pete's Motorola Root Tools, install Titanium Backup and freeze the "2.3.3 Updater" application.
Afterwards, reboot your phone and you should be golden.
Sent from my DROIDX using Tapatalk
nfazzdar - Thanks for the reply . I did a factory reset and that got rid of the yellow triangle. I then rooted as you suggested and installed TiBu . I really is too bad that M and V are pullin this cr#p .
I am going to update the post and host the files. There is also some extra stuff i will put up for download.
For people who don't want to pay for Titanium Backup to have the freeze feature, use a free app called gemini app manager.
Good to know. I think that I will also install OTA Rootkeeper as well.
deboyz1014 said:
For people who don't want to pay for Titanium Backup to have the freeze feature, use a free app called gemini app manager.
Click to expand...
Click to collapse
using linux mint and have a ?
I've followed everything, I believe, but when I run the commands in linux everything runs then it says "reboot into bootloader" and just sits there. I've tried doing it in bootloader and get a message 'waiting on phone:failed Are you root? Can someone steer me in the right direction I gotta get this phone on another ROM. Thanks in advance.
BRANDENDEUCE said:
I've followed everything, I believe, but when I run the commands in linux everything runs then it says "reboot into bootloader" and just sits there. I've tried doing it in bootloader and get a message 'waiting on phone:failed Are you root? Can someone steer me in the right direction I gotta get this phone on another ROM. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same problem here too.
Sent from my HTC Flyer P510e using XDA
landonotis said:
Exactly the same problem here too.
Sent from my HTC Flyer P510e using XDA
Click to expand...
Click to collapse
You need to either:
Code:
sudo su
./sbf_flash
or
Code:
sudo ./sbf_flash
Note: if using
Code:
sudo su
be sure that the terminal shows a "#" instead of a "$" after you input the command. This shows that you are root.
Sent from my DROIDX using Tapatalk
infazzdar said:
You need to either:
Code:
sudo su
./sbf_flash
or
Code:
sudo ./sbf_flash
Note: if using
Code:
sudo su
be sure that the terminal shows a "#" instead of a "$" after you input the command. This shows that you are root.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
When exactly do we need to input the code? I am assuming this is in terminal on linux?
BRANDENDEUCE said:
When exactly do we need to input the code? I am assuming this is in terminal on linux?
Click to expand...
Click to collapse
Sorry for not specifying, but you assume correctly.
Sent from my Transformer TF101 using Tapatalk
What roms can we use now?
Now that we have root and su on the droid x/milestone what roms are we able to flash? I know they can't be froyo based but do they now have to be related to the milestone roms, droid x, or both? I've tried a few and it's always an abort so I'm just needing some direction here...
BRANDENDEUCE said:
Now that we have root and su on the droid x/milestone what roms are we able to flash? I know they can't be froyo based but do they now have to be related to the milestone roms, droid x, or both? I've tried a few and it's always an abort so I'm just needing some direction here...
Click to expand...
Click to collapse
I believe this thread will be of help to you. =D
http://rootzwiki.com/index.php?/topic/21337-[ROMS]-Multi-ROM-Thread---Blur-Based-ROMs-for-those-on-.621/.604!
Sent from my DROIDX using Tapatalk 2 Beta-5
This worked great.
Any cwm kernels are we able to use?
Just wondering if we can flash custom kernels since we can do roms? If so any help would be appreciated.

Root to recover wifi passwords

Hello:
I've had my Moto X4 in service for over 4 years now...long past due for an upgrade. I've finally gone and done it, and have transferred my active service to my new phone.
I was using Google's backup service, which supposedly will sync wifi passwords over, but it did not work (not surprised). My research indicates I need to root my phone to gain access to /etc/wpa_supplicant.conf (a file I'm familiar with on linux).
So, now that I'm not using this phone anymore, all I am trying to do is get the last vestiges of data off of it before it gets wiped and possibly pressed into "retirement service" (eg, wifi smart device interface, child's play phone, etc).
I found many guides to rooting the X4, but they all say you will loose all your data first...That is counter-productive in this case, as the only reason I am rooting is to get a good backup.
Is there a solution to my issue (currently non-rooted, need to retrieve my very long list of saved wifi passwords accumulated over 4 years as an IT tech at hundreds of businesses.....)?
Thanks!
--Jim
If you go to your saved networks, you can click on any Wifi/SSID name and then press the "Share" button (usually with a QR Code icon). Next, take a screenshot of this code. By using a simple QR Code scanner to scan these QR Codes, the details of the codes will be converted to text. From there, you can clearly see the SSID and password of the network.
You can either painstakingly extract these details (for say, if you need them on a PC etc.), or click on the QR Code icon next to the add network button (recommended), and then scan these images on your other phone, adding them to its list of saved networks.
Note: This feature isn't in every phone, and I believe it's only in android 9/10+ (cannot confirm though)
Yep, not available on this phone (moto X4), unfortunately. I've been missing this repeatedly
This is Android version 9, Google Fi version. Is there somewhere I need to go to turn this on?
I think it comes as a built-in feature. It's included in AOSP android 10+ (confirmed), but some manufacturers, cough cough oneplus cough cough, choose not to add it.
Unfortunately, all other methods of recovery (including apps) seem to require root.
You could try to use the adb pull command to extract the file your looking for from your phone and paste in onto your pc, but I don't have enough knowledge regarding it to guide you on that. It doesn't require root though.
Before you try the adb pull option (as its a bit lengthy and could be difficult for some), try to root your phone using KingoRoot (not to be confused with KingRoot). Try its one-click root app first. It may fail multiple times, but after a couple of tries it should work. If it does work, it won't wipe your data, which is why I'm recommending it.
Unfortunately, Kingoroot apk fails at 90% each time, with error code 0x11DD99. It recommends me try the pc app, which it appears all downloads for it are down/broke, so I haven't been able to get it.
Any more suggestions?
adb pull?
you'll need to look up how it works and its syntax, but it should be able to copy files from your phone onto your pc.
you can also copy files from your pc onto your phone using adb push
i cant really guide you on this as ive only done it once, and that was a really long time ago
To get access to root data, you need root access...
I guess you can root your stock rom without erasing data.
Boot to twrp
Sideload magisk
Finway said:
To get access to root data, you need root access...
I guess you can root your stock rom without erasing data.
Boot to twrp
Sideload magisk
Click to expand...
Click to collapse
He can't get into TWRP without unlocking though..?
Finway said:
To get access to root data, you need root access...
I guess you can root your stock rom without erasing data.
Boot to twrp
Sideload magisk
Click to expand...
Click to collapse
PhotonIce said:
He can't get into TWRP without unlocking though..?
Click to expand...
Click to collapse
Otherwise, he could've used the twrp file manager to get the data, even without root.
Apparently it can be done via DroidKit, don't know if that's free though..
https://www.imobie.com/android-recovery/restore-saved-wifi-passwords-on-google.htm

Categories

Resources