Related
Hi, I've been looking high and low for an IP4 type bumper for the O2X. Either hard plastic or silicone/TPU, and only covering the edge of the device and not the back of it.
Anybody know where to find one?
Thanks!
Yes ebay, quick search
http://www.ebay.co.uk/itm/Purple-Bu...446498?pt=PDA_Accessories&hash=item35b3c74062
http://www.ebay.co.uk/itm/Silicone-..._MobilePhonesCasesPouches&hash=item45fdd3d723
HoundDK said:
only covering the edge of the device and not the back of it.
Click to expand...
Click to collapse
Yeah I'd be quite interrested in one of these but both of those cover the back...
http://www.ebay.co.uk/itm/Aluminum-...802025?pt=PDA_Accessories&hash=item2566c25629
http://www.ebay.co.uk/itm/Blue-Cove...550794?pt=PDA_Accessories&hash=item4aae48414a
http://www.ebay.co.uk/itm/ALUMINUM-...016450?pt=PDA_Accessories&hash=item3cbdc7a8c2
found this, doesn't look great but shows they exist.
Hi,
Has anyone seen a back replacment combined with QuickWindow front?
For the int. ver D802
Maybe you'll find one on ebay.
I did search ebay. All l found were the kind that goes over the back. Adds thickness...
Never mind
kobyz said:
Hi,
Has anyone seen a back replacment combined with QuickWindow front?
For the int. ver D802
Click to expand...
Click to collapse
Here it is.
http://www.ebay.co.uk/itm/Genuine-L...lePhonesCasesPouches&var=&hash=item4d153bae75
Looks great thanks!
I wonder if its compatible with d802 it says f320
Also a bit pricy...
kobyz said:
Looks great thanks!
I wonder if its compatible with d802 it says f320
Also a bit pricy...
Click to expand...
Click to collapse
You will have a hole in the up right corner where the stylus from f320 version is. See pictures on ebay.
Also the hole from audio jack is not completly round.
All in all i think will fit.
Thanks for the help!
kobyz said:
Thanks for the help!
Click to expand...
Click to collapse
If you do pick one up, could you be our guinea pig and let us know how it fits, and take a few pics? Thanks!
PeatCoal said:
If you do pick one up, could you be our guinea pig and let us know how it fits, and take a few pics? Thanks!
Click to expand...
Click to collapse
sure
And, what are your experiences?
Lebber said:
And, what are your experiences?
Click to expand...
Click to collapse
Didn't buy that one. Got a cheap over-the-back cover+front door.
Just to get the feel for the front cover to see if I like it.
I don't.
Went back to bare naked phone as god intended it to be.
Hello,
When I buy a Wallet Case for my Nexus6, do I have to consider buying a wallet with an opening on the Wireless Charging point (The M Symbol) ? Like this one.
Will the Wireless Charging work if there is no opening ?
This one doesn't have that opening.
Please suggest.
Thanks.
The center of the coil is about 1/3 of the way up from the bottom, so in a way it is exactly opposite the dimple.
I use a Ringke SLIM which is solid on the back and have no issues with Qi charging, other than the need to skew the phone bit high on the charger to center up the coils.
If it'll charge through a Ballistic Tough Jacket Maxx (and it does...), then you have nothing to worry about.
Hurry up and HIDE the ugly M logo.
Hello,
I need a Nexus6 Wallet with cut-offs for camera, power & volume buttons, 2 speakers, charger & audio ports, Moto Logo (not necessary). Do you know any Wallets that meets these requirements ? For most wallets, the cut-off for power & volume buttons won't be there. There will be buttons instead.
What about the Magnet Flap like this ?
Will it be dangerous for the data ?
Thanks.
aniyan.rajan6 said:
Hello,
I need a Nexus6 Wallet with cut-offs for camera, power & volume buttons, 2 speakers, charger & audio ports, Moto Logo (not necessary). Do you know any Wallets that meets these requirements ? For most wallets, the cut-off for power & volume buttons won't be there. There will be buttons instead.
What about the Magnet Flap like this ?
Will it be dangerous for the data ?
Thanks.
Click to expand...
Click to collapse
It shouldn't be able to harm your data in any way. The storage isn't magnetic these days. It might harm any credit cards you put in it though if you put them in the wrong way. Spigen even includes a note about that telling you which way the magnetic strip should go.
Looks like a good wallet case to be honest. The first one I've seen with a magnetic closure as well as cutouts for both speakers. Kind of want one myself now.
Obscure Reference said:
It shouldn't be able to harm your data in any way. The storage isn't magnetic these days. It might harm any credit cards you put in it though if you put them in the wrong way. Spigen even includes a note about that telling you which way the magnetic strip should go.
Looks like a good wallet case to be honest. The first one I've seen with a magnetic closure as well as cutouts for both speakers. Kind of want one myself now.
Click to expand...
Click to collapse
Good to hear that it helped you. I'm also looking for a similar one, but with cutout for the Power and Volume buttons in additional. I'm not going to store my cards in the phone wallet anyway.
Hello,
I have a question regarding this kind of Wallet. I am very doubtful, whether the Power & Volume Buttons on the case will damage the actual Power & Volume Buttons on the phone. I feel that it would be safer if I could press those buttons on the phone with my finger, as the buttons on the Wallet Case may be in a wrong position. What is your opinion about this ? Anyone having such problems ?
Thanks.
aniyan.rajan6 said:
Hello,
I have a question regarding this kind of Wallet. I am very doubtful, whether the Power & Volume Buttons on the case will damage the actual Power & Volume Buttons on the phone. I feel that it would be safer if I could press those buttons on the phone with my finger, as the buttons on the Wallet Case may be in a wrong position. What is your opinion about this ? Anyone having such problems ?
Thanks.
Click to expand...
Click to collapse
Please look through the accessories forum, here:
http://forum.xda-developers.com/nexus-6/accessories
aniyan.rajan6 said:
Hello,
I have a question regarding this kind of Wallet. I am very doubtful, whether the Power & Volume Buttons on the case will damage the actual Power & Volume Buttons on the phone. I feel that it would be safer if I could press those buttons on the phone with my finger, as the buttons on the Wallet Case may be in a wrong position. What is your opinion about this ? Anyone having such problems ?
Thanks.
Click to expand...
Click to collapse
I've been using this case for 2 months now, and I'm not entirely happy with it.
The protection is excellent, also the buttons are perfectly aligned so no risk there. It's just easy to press the wrong one.
The main problem is that this case is really, REALLY bulky and heavy (keep in mind that I'm not new to phablets, I've been using them exclusively for 3 years now), because of the flat back. Also, the leather is wearing out quite a lot at the corners.
veesix said:
I've been using this case for 2 months now, and I'm not entirely happy with it.
The protection is excellent, also the buttons are perfectly aligned so no risk there. It's just easy to press the wrong one.
The main problem is that this case is really, REALLY bulky and heavy (keep in mind that I'm not new to phablets, I've been using them exclusively for 3 years now), because of the flat back. Also, the leather is wearing out quite a lot at the corners.
Click to expand...
Click to collapse
Thanks bari for the info. So which one do you suggest ?
aniyan.rajan6 said:
Thanks bari for the info. So which one do you suggest ?
Click to expand...
Click to collapse
I'm not sure, actually, haven't searched yet for a replacement. I'd suggest to look for a wallet case that follows the curved back of the phone.
veesix said:
I'm not sure, actually, haven't searched yet for a replacement. I'd suggest look for a wallet case that follows the curved back of the phone.
Click to expand...
Click to collapse
You are right. But I think that can be only found in a Back Cover Protector (Bumper). I think all the wallets that I have seen are flat at the back side.
aniyan.rajan6 said:
You are right. But I think that can be only found in a Back Cover Protector (Bumper). I think all the wallets that I have seen are flat at the back side.
Click to expand...
Click to collapse
That stilgut book case you posted looks fine and follows the shape of the phone. Sure, it's quite expensive.
veesix said:
That stilgut book case you posted looks fine and follows the shape of the phone. Sure, it's quite expensive.
Click to expand...
Click to collapse
Yes , I remember it is curvy at the back side. But too much expensive in my place (India). It is around 3 times the price of that Spigen Wallet S. It might be good quality, but I can buy a phone for that price Also another disadvantage with Stilgut is that it doesn't cover (protection) the top and bottom at all. No magnetic closure etc.
aniyan.rajan6 said:
Yes , I remember it is curvy at the back side. But too much expensive in my place (India). It is around 3 times the price of that Spigen Wallet S. It might be good quality, but I can buy a phone for that price Also another disadvantage with Stilgut is that it doesn't cover (protection) the top and bottom at all. No magnetic closure etc.
Click to expand...
Click to collapse
Well, as I said, the protection is excellent with the Spiegen. Some pictures, so you can judge by yourself:
veesix said:
Well, as I said, the protection is excellent with the Spiegen. Some pictures, so you can judge by yourself:
Click to expand...
Click to collapse
Yes I can see the leather worn out at the corners. It also seems bulky. Have you tried Qi Wireless charging with this wallet ?
Thanks.
aniyan.rajan6 said:
Yes I can see the leather worn out at the corners. It also seems bulky. Have you tried Qi Wireless charging with this wallet ?
Thanks.
Click to expand...
Click to collapse
You're welcome
I don't have a wireless charger, so no, I haven't tried.
veesix,
This one has a curvy back, with cutouts for all ports. But the top and bottom side of the phone are still open. Actually, there is no perfect wallet or case
aniyan.rajan6 said:
veesix,
This one has a curvy back, with cutouts for all ports. But the top and bottom side of the phone are still open. Actually, there is no perfect wallet or case
Click to expand...
Click to collapse
No, there's no such thing as a perfect case
I wouldn't mind if the top and bottom of the phone are less protected. Most important thing is the screen, and I don't want to use a screen protector.
Can anyone recommend a phone mount for a road bike?
GripR said:
Can anyone recommend a phone mount for a road bike?
Click to expand...
Click to collapse
This is what I use, http://www.quadlockcase.com/. You really need to have a dedicated case though, because you have to stick a lock piece to it.
This one is also good http://www.witrigs.com/universal-bicycle-mount-holder-for-smart-phone-black.
spotmark said:
This is what I use, http://www.quadlockcase.com/. You really need to have a dedicated case though, because you have to stick a lock piece to it.
Click to expand...
Click to collapse
I use the Quadlock as well. I used it for my S4. Still looking for a case for my G4 to use with it. What case do you use?
flamadiddle said:
I use the Quadlock as well. I used it for my S4. Still looking for a case for my G4 to use with it. What case do you use?
Click to expand...
Click to collapse
I actually haven't bought a case for my G4 yet, but I think it's going to be this one, http://www.amazon.com/gp/product/B00VY35YR6?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00.
spotmark said:
I actually haven't bought a case for my G4 yet, but I think it's going to be this one, http://www.amazon.com/gp/product/B00VY35YR6?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00.
Click to expand...
Click to collapse
I have a similar TPU case, which Quadlock does not recommend for their universal adapter. I was wondering because I imagine it will be difficult getting it to hold well with the G4's curved back. Didn't know if you had already figured out a solution.
Excellent kickstand mechanism, very slippery but retains the exact ergonomics as the devices original design.
Does the kickstand on this case use a magnet to keep it closed? I read somewhere the the magnet will have an adverse affect on the signal.
Chuckd610 said:
Does the kickstand on this case use a magnet to keep it closed? I read somewhere the the magnet will have an adverse affect on the signal.
Click to expand...
Click to collapse
I heard that too but this is a second revision. That and the spen issue have been resolved. Everything is perfect
This ACTUALLY looks legit. Where did you pick this up at?
FormeriPhoney said:
Excellent kickstand mechanism, very slippery but retains the exact ergonomics as the devices original design.
Click to expand...
Click to collapse
Chuckd610 said:
Does the kickstand on this case use a magnet to keep it closed? I read somewhere the the magnet will have an adverse affect on the signal.
Click to expand...
Click to collapse
FormeriPhoney said:
I heard that too but this is a second revision. That and the spen issue have been resolved. Everything is perfect
Click to expand...
Click to collapse
sebastianraven said:
This ACTUALLY looks legit. Where did you pick this up at?
Click to expand...
Click to collapse
I have two colors for this case from reviewing it. I love this case however I find the buttons are very stiff and hard to press. Anyone else have this experience?
Iskateforfree said:
I have two colors for this case from reviewing it. I love this case however I find the buttons are very stiff and hard to press. Anyone else have this experience?
Click to expand...
Click to collapse
That's weird bc I think these are one of the best button feedback of any case I have.. Besides the UAG
sebastianraven said:
This ACTUALLY looks legit. Where did you pick this up at?
Click to expand...
Click to collapse
Amazon
FormeriPhoney said:
That's weird bc I think these are one of the best button feedback of any case I have.. Besides the UAG
Click to expand...
Click to collapse
Really? Wow. I must have installed it incorrectly or something. I'll double check it again in a few minutes and report back.
Iskateforfree said:
Really? Wow. I must have installed it incorrectly or something. I'll double check it again in a few minutes and report back.
Click to expand...
Click to collapse
No joke. This thing is a pain in the ass to get on right. You have to make sure the inner trim is in the volume and power key then put the power side in first, then press the bottom in hard. Ridiculous lol
FormeriPhoney said:
No joke. This thing is a pain in the ass to get on right. You have to make sure the inner trim is in the volume and power key then put the power side in first, then press the bottom in hard. Ridiculous lol
Click to expand...
Click to collapse
Just installed the case like you described. The buttons feel a little bit better but I wonder if these are the types of buttons that need a "break in" period. I know cases have that and the buttons feel a lot better after some time.
How slippery?
Sent from my SM-N920T using Tapatalk
The bottom near the charging port is messed up...
Sent from my SM-N920P using Tapatalk
A nice case. I like the clear case look to it and mos def cool kick stand. I as well as the a few comments above, would like to know how slippery is the case in hand?
david_b01 said:
The bottom near the charging port is messed up...
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
I didn't push it down all the way.. It's flush now
tw1n5nak35 said:
A nice case. I like the clear case look to it and mos def cool kick stand. I as well as the a few comments above, would like to know how slippery is the case in hand?
Click to expand...
Click to collapse
If you think the device is slippery naked then yes. The bottom and lip are you so that helps
FormeriPhoney said:
If you think the device is slippery naked then yes. The bottom and lip are you so that helps
Click to expand...
Click to collapse
That helps alot in making my descion for a case. I work with diesel engines on the regular and cant do slippery.