Flash 4.4 Kitkat - One (M7) Q&A, Help & Troubleshooting

Hi everyone,
Now i in 4.3 custom rom can i direct flash 4.4 viper or ARHD to it with full wipe on AROMA?
device status
S-on
HBoot 1.54
recovery : cwm 6.0.3.4

If you are allready on an custom ROM, yes

Grobsen said:
If you are allready on an custom ROM, yes
Click to expand...
Click to collapse
last time i flash 4.4 leep bootloop, some ppl say is because i s-on.
so i not sure is s-on or cwm version issue.

boonteong12345 said:
last time i flash 4.4 leep bootloop, some ppl say is because i s-on.
so i not sure is s-on or cwm version issue.
Click to expand...
Click to collapse
If u are S-ON u have to flash the kernel Manually from fastboot......
Did u do that last time........?????

You do NOT need to be S-off, and there is absolutely no need to flash the boot.img or kernel separately. But Unlocked is necessary, also latest TWRP recovery is required.
As always, do a Nandroid of your current ROM.
GPE is a different matter, though. I am not familiar with GPE ROMs as I never tried them. The One with Sense is too good to miss! But not relevant as both ROMs you mentioned are Sense ROMs!
Sent from my HTC One using XDA Premium HD app

[email protected] said:
If u are S-ON u have to flash the kernel Manually from fastboot......
Did u do that last time........?????
Click to expand...
Click to collapse
normally after i flash custom rom (4.3), i also will flash bulletproof kenal.
last time when i flash 4.4 (with fullwipe in AROMA) it bootloop after flash the rom.(with old version CWM)

hardstuffmuc said:
You do NOT need to be S-off, and there is absolutely no need to flash the boot.img or kernel separately. But Unlocked is necessary, also latest TWRP recovery is required.
As always, do a Nandroid of your current ROM.
GPE is a different matter, though. I am not familiar with GPE ROMs as I never tried them. The One with Sense is too good to miss! But not relevant as both ROMs you mentioned are Sense ROMs!
Sent from my HTC One using XDA Premium HD app
Click to expand...
Click to collapse
Oh, so if i want flash 4.4 must use twrp 2.6.33 or latest recovery rite?
i never do nandoid, but i got keep old rom in internal storage.(need do nandroid next time.)
I just flash stock rom, because love sense and dislike GPE rom interface.

boonteong12345 said:
normally after i flash custom rom (4.3), i also will flash bulletproof kenal.
last time when i flash 4.4 (with fullwipe in AROMA) it bootloop after flash the rom.(with old version CWM)
Click to expand...
Click to collapse
Because the recovery was not yet adjusted.
You should do regularly a Nandroid...it is easy enough, and keep it on the internal storage.
For now, flash the latest TWRP recovery in fastboot mode, then flash any Sense ROM, and boot up first into it to check that all is good., then do another Nandroid of the now successfully booted Sense ROM. (OTG cable and USB drive come in handy here as you can Nandroid directly to external storage, or to have a collection of different Nandroids to free up internal storage space, as well as added security as you can always flash also a ROM from USB drive should things go wrong!)
After that you can try different kernels if you must.
I am running InsertCoin 7.0.5 with ElemntalX 10.4 for several weeks now and this combination has fantastic battery performance as well as it is totally stable!

hardstuffmuc said:
Because the recovery was not yet adjusted.
You should do regularly a Nandroid...it is easy enough, and keep it on the internal storage.
For now, flash the latest TWRP recovery in fastboot mode, then flash any Sense ROM, and boot up first into it to check that all is good., then do another Nandroid of the now successfully booted Sense ROM. (OTG cable and USB drive come in handy here as you can Nandroid directly to external storage, or to have a collection of different Nandroids to free up internal storage space, as well as added security as you can always flash also a ROM from USB drive should things go wrong!)
After that you can try different kernels if you must.
I am running InsertCoin 7.0.5 with ElemntalX 10.4 for several weeks now and this combination has fantastic battery performance as well as it is totally stable!
Click to expand...
Click to collapse
i just flash twrp 2.6.33, later will try insert coin 7.0.5 too...
may i know what is ur setting for ElemntalX? i using bulletproof because my previous setting fail...
you enable s2w function?

No settings, all default!

I'm on Viper 4.2.0 with ElemntlX with s2w and dt2wake
No Problems so far and great battery life.
If you get bootloops try "fastboot erase cache"

hardstuffmuc said:
No settings, all default!
Click to expand...
Click to collapse
ok,thanks..
dunno why after i do something in Xposed, it ask me reboot and bootloop, then i flash the rom again

Grobsen said:
I'm on Viper 4.2.0 with ElemntlX with s2w and dt2wake
No Problems so far and great battery life.
If you get bootloops try "fastboot erase cache"
Click to expand...
Click to collapse
ok, thanks for ur solution...
now i trying incer coin, mayb will try viper soon

Related

[Q] Boot Loop after Battery Circle Mod

So I had AOSP Gingerbread mod working fine with Deca kernel. I wanted to install the circle battery mod so I rebooted to recovery and wiped cache and cleared Davlik and installed the mod. Now my phone is constantly boot looping. I assume I have to RUU back to stock? Is there a certain RUU I should use?
I've tried two different RUU's and I keep getting ERROR[130]: MODEL ID ERROR
I've tried to USB FASTBOOT:
RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver and
HTC Sprint Hero MR 2.27.651.6
Sounds like you didn't flash the correct one for your ROM. Just flash the ROM over itself with no wipe and you should boot up. You don't need to RUU, just use the GB ROM.
Make sure you download the Battery Mod that matches the ROM version your are running. You need to do it with each ROM you flash and they are not cross-ROM compatible.
How do I flash the ROM over itself if it is boot looping? Can I get into ClockworkMod Recovery somehow?
beand1p said:
How do I flash the ROM over itself if it is boot looping? Can I get into ClockworkMod Recovery somehow?
Click to expand...
Click to collapse
- Pull your battery and put it back in. That will obviously stop the loop
- Press and hold the home key and power at the same time
- Hold until recovery comes up
- Flash the ROM
Thanks. Got it. Sorry, I'm new to all this.
No problem. Glad you got it.
Sent from my HTC Hero CDMA using XDA App
ranger61878 said:
Sounds like you didn't flash the correct one for your ROM. Just flash the ROM over itself with no wipe and you should boot up. You don't need to RUU, just use the GB ROM.
Make sure you download the Battery Mod that matches the ROM version your are running. You need to do it with each ROM you flash and they are not cross-ROM compatible.
Click to expand...
Click to collapse
Thanks for the fix. I bootlooped mine doing the same thing and this fixed it. You rock!
if you have a backupof your stock, flash that, then unroot with superone click
davidevan said:
if you have a backupof your stock, flash that, then unroot with superone click
Click to expand...
Click to collapse
hhahha well i really need to read the whole thread,
well thats an easy way to unroot fyi

Not boot after flash HolicsROM

HolicsROM V1.3 Official with Holics Kernel
My vivid is S-OFF, i've used TWRP recovery (i don't know what version, i flash TWRP in windroid tool), and WCX Recovery, and still stuck in HTC Logo, i wait about 5-10 min and flash RUU, i've wipe cache, factory reset, android_secure, and system by instruction, if i skip wipe system step, it boot but still stock RUU no change. Please help i love HTC sense, but it drain battery so murch, i think this rom is perfect for me, i don't want to use CM rom becase camera is bad .
toila6congau said:
HolicsROM V1.3 Official with Holics Kernel
My vivid is S-OFF, i've used TWRP recovery (i don't know what version, i flash TWRP in windroid tool), and WCX Recovery, and still stuck in HTC Logo, i wait about 5-10 min and flash RUU, i've wipe cache, factory reset, android_secure, and system by instruction, if i skip wipe system step, it boot but still stock RUU no change. Please help i love HTC sense, but it drain battery so murch, i think this rom is perfect for me, i don't want to use CM rom becase camera is bad .
Click to expand...
Click to collapse
please report at the rom thread, maybe you'll find the answer
nasheich said:
please report at the rom thread, maybe you'll find the answer
Click to expand...
Click to collapse
Thanks but it need 10 post to reply in dev thread
toila6congau said:
Thanks but it need 10 post to reply in dev thread
Click to expand...
Click to collapse
ooo, sorry i forgot about it
i'll report it if you want, just give me the link of the rom
It appears the ROM is not flashing properly... What version of TWRP
Sent from my Vivid 4G using Tapatalk
Try flashing with WCX because TWRP sometimes screws up when flashing to partitions.
nasheich said:
ooo, sorry i forgot about it
i'll report it if you want, just give me the link of the rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1585373
thanks

need help with flashing android hd 62.0

hello there,
so earlier i was trying to flash my htc one m7 with android 62.0 but it seems it wasn't a success because now my phone is just stuck in a boot loop and i cant get into recovery mode anymore. Now its been awhile since i flashed a rom, i had android hd 31.0 before that so i thought id update it but its seems its gonna be a bit harder that that. my phone is showing s-on with hboot 1.55 and i used clockwork to flash the rom. now could i get some advice as to how i could get this android hd 62.0 to work on my htc? or should i just try to revert to what i used to but the problem is the old rom isn't on my phone anymore and i was never able to find the stock rom for my phone (rogers canada m7). any advice here ?
If you have an old CWM, try upgrading it first. With newer OSs, something in the Android install procedure has changed. You need a recovery that's at least as new as TWRP 2.6.3.3. To get back to recovery, try using the power+volume down button to get to fastboot mode, and use the computer for "fastboot erase recovery" and "fastboot erase cache". Then boot to recovery.
fenstre said:
If you have an old CWM, try upgrading it first. With newer OSs, something in the Android install procedure has changed. You need a recovery that's at least as new as TWRP 2.6.3.3. To get back to recovery, try using the power+volume down button to get to fastboot mode, and use the computer for "fastboot erase recovery" and "fastboot erase cache". Then boot to recovery.
Click to expand...
Click to collapse
hey there fenstre thanks for answering so quickly,
so i was able to install a most recent cwm version, i tried to flash the same rom again but this time it just stay stuck on the htc screen.i tried to clear the cache..not really sure what else i should try at this point is there anything else i might be doing wrong ?
deerome said:
so i was able to install a most recent cwm version, i tried to flash the same rom again but this time it just stay stuck on the htc screen.i tried to clear the cache..not really sure what else i should try at this point is there anything else i might be doing wrong ?
Click to expand...
Click to collapse
Do you need to wipe data? Did you wipe data within the ARHD installer? (For me, it doesn't ever work unless I do this. You can make a nandroid backup before if you want.)
fenstre said:
Do you need to wipe data? Did you wipe data within the ARHD installer? (For me, it doesn't ever work unless I do this. You can make a nandroid backup before if you want.)
Click to expand...
Click to collapse
i didint wipe the data the first time i tried flashing i thought i didint need to but guess i was wrong but i did try to flash it a second time while wiping it and it still seem to stay stuck on the htc logo..grr would there be another way to go around about it ? could the rom be not compatible with my phone?
deerome said:
i didint wipe the data the first time i tried flashing i thought i didint need to but guess i was wrong but i did try to flash it a second time while wiping it and it still seem to stay stuck on the htc logo..grr would there be another way to go around about it ? could the rom be not compatible with my phone?
Click to expand...
Click to collapse
Could be--is your phone the m7-ul, the international HTC One? If so, did you wipe cache and dalvik cache in recovery, and data inside the ARHD installer? If you've done all that, I'm about out of ideas...
ARHD requires TWRP 2.6.3.3 CWM will not work and will just bootloop
http://techerrata.com/browse/twrp2/m7
ARHD 2.7 has known issues
Sent from my GT-I9505 using XDA Premium 4 mobile app
fenstre said:
Could be--is your phone the m7-ul, the international HTC One? If so, did you wipe cache and dalvik cache in recovery, and data inside the ARHD installer? If you've done all that, I'm about out of ideas...
Click to expand...
Click to collapse
yea i even tried that and it didint work.if i found a stock rom for my htc carrier (roger) would i be able to install that on my phone ?
deerome said:
yea i even tried that and it didint work.if i found a stock rom for my htc carrier (roger) would i be able to install that on my phone ?
Click to expand...
Click to collapse
Yes, do it from the bootloader (after re-locking it). You'll have to find the instructions somewhere...
bored_stupid said:
ARHD requires TWRP 2.6.3.3 CWM will not work and will just bootloop
http://techerrata.com/browse/twrp2/m7
ARHD 2.7 has known issues
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
that was the issue this fixed my problem your a genius ! thanks :good:
deerome said:
that was the issue this fixed my problem your a genius ! thanks :good:
Click to expand...
Click to collapse
Your welcome
Sent from my GT-I9505 using XDA Premium 4 mobile app

[Q] AHD won't boot into custom roms

New to me AHD will not boot into any custom roms, I'm confused as to why. But here's what I've done:
Root (motochopper)
Unlock bootloader
Using mythtools, flashed recovery
enter recovery, factory reset, also format /system (CWM Touch 6.0.4.4)
flash CM and Gapps
Afterwards, phone just sits at boot logo. I used mythtools to reflash stock firmware, and that boots and works fine, but when I repeat the process of flashing recovery and flashing a rom, the phone will no longer boot. What am I misssing?
If you're flashing CM, make sure you flash a nightly from BEFORE July 1st, or flash milestone release M8. Then report back results.
Any CM-based ROM from after those dates won't flash because of bootloader issues related to the fact that the Atrix HD hasn't been upgraded to Motorola's latest bootloader yet.
quasihellfish said:
If you're flashing CM, make sure you flash a nightly from BEFORE July 1st, or flash milestone release M8. Then report back results.
Any CM-based ROM from after those dates won't flash because of bootloader issues related to the fact that the Atrix HD hasn't been upgraded to Motorola's latest bootloader yet.
Click to expand...
Click to collapse
Thanks. I was trying to flash M8. Guess I'm going to try and reroot and reunlock boot loader, though it's already done.
mustafu said:
Thanks. I was trying to flash M8. Guess I'm going to try and reroot and reunlock boot loader, though it's already done.
Click to expand...
Click to collapse
M8 should work. It's still JB bootloader compatible.
palmbeach05 said:
M8 should work. It's still JB bootloader compatible.
Click to expand...
Click to collapse
Same goes with validus 6.0
It's like fastboot isn't working...keep trying to flash recovery from it and it doesn't seem to work. Going to check those threads.
Went through the whole process again, still bootloops. rom and gapps flash fine with no errors, the only strangeness I notice is that while flashing rom in recovery, it doesn't seem to take very long (15-20 secs at most). I remember it being considerably longer, the gapps take longer to flash than the rom does. MD5 is good, rom is intact. I'm at a loss of what to do.
mustafu said:
Went through the whole process again, still bootloops. rom and gapps flash fine with no errors, the only strangeness I notice is that while flashing rom in recovery, it doesn't seem to take very long (15-20 secs at most). I remember it being considerably longer, the gapps take longer to flash than the rom does. MD5 is good, rom is intact. I'm at a loss of what to do.
Click to expand...
Click to collapse
Which recovery are you using?
mustafu said:
Went through the whole process again, still bootloops. rom and gapps flash fine with no errors, the only strangeness I notice is that while flashing rom in recovery, it doesn't seem to take very long (15-20 secs at most). I remember it being considerably longer, the gapps take longer to flash than the rom does. MD5 is good, rom is intact. I'm at a loss of what to do.
Click to expand...
Click to collapse
Instead of CWM Touch, try flashing Philz Advanced recovery (I think it's what most users use). Download latest from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960/
I've never had an issue using Philz. I'm on version 6.43.6 now (which is based on CWM 6.0.4.8)
bylithium said:
Which recovery are you using?
Click to expand...
Click to collapse
CWM Touch 6.0.4.4
quasihellfish said:
Instead of CWM Touch, try flashing Philz Advanced recovery (I think it's what most users use). Download latest from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960/
I've never had an issue using Philz. I'm on version 6.43.6 now (which is based on CWM 6.0.4.8)
Click to expand...
Click to collapse
Thank you, will give it a try.
mustafu said:
CWM Touch 6.0.4.4
Thank you, will give it a try.
Click to expand...
Click to collapse
I recommend philz. What rom are you flashing?
bylithium said:
I recommend philz. What rom are you flashing?
Click to expand...
Click to collapse
Was trying unified CM M8 still.
mustafu said:
Was trying unified CM M8 still.
Click to expand...
Click to collapse
How did philz go for you? I'm running sokp ?
bylithium said:
How did philz go for you? I'm running sokp ?
Click to expand...
Click to collapse
Was another no-go on PhilZ Back on Stock 4.1 again, unfortunately. Didn't even bootloop this time, just sat at the Moto logo. Strangely, I don't have the Bootloader Unlocked warning screen, just a red Moto logo, not sure how that got changed.
mustafu said:
Was another no-go on PhilZ Back on Stock 4.1 again, unfortunately. Didn't even bootloop this time, just sat at the Moto logo. Strangely, I don't have the Bootloader Unlocked warning screen, just a red Moto logo, not sure how that got changed.
Click to expand...
Click to collapse
Damn, I've messaged you.
So after a little this and that, I've realized that the md5 of the ROM isn't matching anymore, and no matter what browser and how many times I download the ROM, the md5 will now never match. Using the md5 checker on PhilZ latest. The gapps match every time when I check.
I've been using my Kingston SD card to store the ROMs and gapps, will try storing them on the phone and see how it fares.
Sent from my MB886 using Tapatalk
It's working now. Flashed the ROM, phone sat at the boot logo for 20 minutes, then the cm boot animation came on and booted from there. This is the 3rd AHD I've owned but the 1st to have this very strange behavior.

Boot Loop S On Help

Hi
I had cm11 installed but then tried to install a kernel which put my htc one m7 into a boot loop
now in the recovery screen it says:
TAMPERED
RELOCKED
S-ON
I didnt have a nandroid backup and I am in need of urgent help Please
elnino-1990 said:
Hi
I had cm11 installed but then tried to install a kernel which put my htc one m7 into a boot loop
now in the recovery screen it says:
TAMPERED
RELOCKED
S-ON
I didnt have a nandroid backup and I am in need of urgent help Please
Click to expand...
Click to collapse
Never relock your bootloader if your using a custom rom or recovery, so first of all, get it unlocked again.
which kernel did you flash ?
bulletproof kernel.. is there a guide to do that or can i follow the following one:
http://www.xda-developers.com/android/how-to-unlock-the-htc-one-bootloader-xda-developer-tv/
elnino-1990 said:
bulletproof kernel.. is there a guide to do that or can i follow the following one:
http://www.xda-developers.com/android/how-to-unlock-the-htc-one-bootloader-xda-developer-tv/
Click to expand...
Click to collapse
I believe bullet proof is a sense only kernel, CM is an asop rom not a sense rom.
Just unlock your bootloader at HTC Dev,
Once its unlocked, you might get lucky and just be able to flash a correct kernel to get booting again, failing that you'll either have to flash a new rom or restore your backup.
Sorry that took long it now says unlocked. How do i go about install cyanogenmod again or do i have to install a stock?
elnino-1990 said:
Sorry that took long it now says unlocked. How do i go about install cyanogenmod again or do i have to install a stock?
Click to expand...
Click to collapse
Try flashing an AOSP kernel now, something like this one, hopefully after that your phone will boot back to CM.
http://forum.xda-developers.com/showthread.php?t=2789806
is your backup a CM rom or a sense rom ?
Seanie280672 said:
Try flashing an AOSP kernel now, something like this one, hopefully after that your phone will boot back to CM.
http://forum.xda-developers.com/showthread.php?t=2789806
is your backup a CM rom or a sense rom ?
Click to expand...
Click to collapse
Thing is i did a factory rest so I wont have CM on the phone anymore will I? Also i didnt make a backup
elnino-1990 said:
Thing is i did a factory rest so I wont have CM on the phone anymore will I? Also i didnt make a backup
Click to expand...
Click to collapse
yes the rom will still be there if it was only a factory reset, if you did an advanced wipe inside something like TWRP then it wont.
Factory reset just restores whatever rom is on your phone to the state it was at when you first installed it, ie you will just have to set it back up again with email addresses and passwords, carrier and country etc after it boots.
Seanie280672 said:
yes the rom will still be there if it was only a factory reset, if you did an advanced wipe inside something like TWRP then it wont.
Factory reset just restores whatever rom is on your phone to the state it was at when you first installed it, ie you will just have to set it back up again with email addresses and passwords, carrier and country etc after it boots.
Click to expand...
Click to collapse
oh ok. as the kernel is in a zip do I have to extract it or use fastboot ?
elnino-1990 said:
oh ok. as the kernel is in a zip do I have to extract it or use fastboot ?
Click to expand...
Click to collapse
you will need to enter recovery, push or sideload it to your internal sdcard and then flash it in recovery.
Seanie280672 said:
you will need to enter recovery, push or sideload it to your internal sdcard and then flash it in recovery.
Click to expand...
Click to collapse
i sideloaded the kernel in recovery and nothing. it instaleld it but after a reboot it is stuck on the htc logo. also the same when i push the kernel to sd card

Categories

Resources