Help Restoring to Full MJ5 Stock - AT&T Galaxy Note 3 Q&A, Help & Troubleshooting

XDA - Hoping for some help getting my note back to full MJ5 stock...
I was originally able to root with Kingo on MJ5 and had run some scripts and long story short I followed this http://forum.xda-developers.com/showthread.php?t=2559715 ...
But now I have MI9 Build and MJ5 Baseband which works okay but I am prompted to update OTA... When I run that, it gets to 38% (ATT logo) and reboots then hangs at the ATT boot logo. If I try to update as specified in the thread using the 2400258.zip package the same thing happens and I have to go back and reflash the MI9 image
Any help, ideas or links? I've scoured through all the pages of most of the threads in this forum and coming up empty
Thanks in advance.

lehighkid said:
XDA - Hoping for some help getting my note back to full MJ5 stock...
I was originally able to root with Kingo on MJ5 and had run some scripts and long story short I followed this http://forum.xda-developers.com/showthread.php?t=2559715 ...
But now I have MI9 Build and MJ5 Baseband which works okay but I am prompted to update OTA... When I run that, it gets to 38% (ATT logo) and reboots then hangs at the ATT boot logo. If I try to update as specified in the thread using the 2400258.zip package the same thing happens and I have to go back and reflash the MI9 image
Any help, ideas or links? I've scoured through all the pages of most of the threads in this forum and coming up empty
Thanks in advance.
Click to expand...
Click to collapse
Currently it isn't possible, from my understanding the stuff to Odin back to full mj5 hasn't been released so the only option is the hybrid from evilpotatoeman right now ?
Sent from my rooted Note 3

lehighkid said:
XDA - Hoping for some help getting my note back to full MJ5 stock...
I was originally able to root with Kingo on MJ5 and had run some scripts and long story short I followed this http://forum.xda-developers.com/showthread.php?t=2559715 ...
But now I have MI9 Build and MJ5 Baseband which works okay but I am prompted to update OTA... When I run that, it gets to 38% (ATT logo) and reboots then hangs at the ATT boot logo. If I try to update as specified in the thread using the 2400258.zip package the same thing happens and I have to go back and reflash the MI9 image
Any help, ideas or links? I've scoured through all the pages of most of the threads in this forum and coming up empty
Thanks in advance.
Click to expand...
Click to collapse
I have the files that will restore you back to stock rooted mj5...PM me and I'll send you the links and process...you must have safestrap recovery installed
Mega

Just wanted to update and let everyone know the issue was due to using an unmodified version of the MI9 system.img.ext4 file instead of the MI9_fix.img.ext4 file in the thread.
I am back on rooted fully stock MJ5 thanks to Mega and the thread referenced in the OP!

Related

HELP - restore to stock for warranty replacement

i was on 4.3 and used safestrap to install a kitkat rom, and instead of going back to 4.3 via safestrap i just followed this link
http://rootzwiki.com/topic/110386-return-to-stock-mj5-works/
that got me back to 4.3 but the OTA to kitkat is not working, it is failing in recovery. Also when i reboot, where is says "Note 3", right under it is CUSTOM with a unlocked symbol. i followed the link i provided twice with it still not working... what can i do?
http://forum.xda-developers.com/showthread.php?t=2703006
andygev35 said:
http://forum.xda-developers.com/showthread.php?t=2703006
Click to expand...
Click to collapse
ty! trying now !
okay so the files still worked, BUT i had to use triangle away to get the customer log to go away
thank you !
Glad it worked.

[Q] Seeking Lollipop update after switching from AT&T to T-mobile

Hi, I was told to post my question here. I bought my Note 3 with AT&T but switched to T-mobile with sim unlock. The device runs fine. My device is currently running N900A....NC2 (4.4.2). It is rooted, however not much has been done after rooting. I'm able to download OTA update. However, the installation fails after 25%. It is unclear if it is because I'm no longer with AT&T or is it because my device is rooted. I tried calling T-mobile but didn't get much help from them. What are my options at this point? I'm pretty new at this so any help is appreciated. Thanks in advance.
Your update fails because you were rooted. You'll need to Odin back to stock NC2 before you can take the OTA. Everything you need to accomplish what you're trying to do is located here: http://forum.xda-developers.com/showthread.php?t=2703006.
The NC2 files are near the bottom of the first post.
andygev35 said:
Your update fails because you were rooted. You'll need to Odin back to stock NC2 before you can take the OTA. Everything you need to accomplish what you're trying to do is located here: http://forum.xda-developers.com/showthread.php?t=2703006.
The NC2 files are near the bottom of the first post.
Click to expand...
Click to collapse
Thank you so much.
ctjay911 said:
Thank you so much.
Click to expand...
Click to collapse
Happy to help.

[Q] Unable to download any new software updates

Whenever I used to try to update my phone from 4.4.2 to 4.4.4, my phone would say the installation was interrupted, and kies would say my firmware is up to date. At the time I didnt care much, but now that 5.0 is out, I want to figure this out. When I got my phone in September I flashed the original software to root, then reflashed 4.4.2. Since then I unrooted and restores my phone to try and resolve the problem, but neither have helped. Does anyone know a solution? If any more information is needed I can definitely provide it.
SyslogPlease said:
Whenever I used to try to update my phone from 4.4.2 to 4.4.4, my phone would say the installation was interrupted, and kies would say my firmware is up to date. At the time I didnt care much, but now that 5.0 is out, I want to figure this out. When I got my phone in September I flashed the original software to root, then reflashed 4.4.2. Since then I unrooted and restores my phone to try and resolve the problem, but neither have helped. Does anyone know a solution? If any more information is needed I can definitely provide it.
Click to expand...
Click to collapse
I have the same problem on my side. I haven't even ever rooted the phone. Always the same error. I have posted this issue here, lets see if some one replies.
http://forum.xda-developers.com/att...ipop-coming-soon-t3030721/page18#post59986756
SyslogPlease said:
Whenever I used to try to update my phone from 4.4.2 to 4.4.4, my phone would say the installation was interrupted, and kies would say my firmware is up to date. At the time I didnt care much, but now that 5.0 is out, I want to figure this out. When I got my phone in September I flashed the original software to root, then reflashed 4.4.2. Since then I unrooted and restores my phone to try and resolve the problem, but neither have helped. Does anyone know a solution? If any more information is needed I can definitely provide it.
Click to expand...
Click to collapse
I had the same issue I used the files from this thread http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 under troubleshooting I first downloaded and then flashed the file to downgrade to nce. Then downloaded the nce to ng3 ota file and sideloaded and flashed in stock recovery after that I have been able to download and update via the ota. hope this helps
doing that process
I can manage the first flash but I'm not really that good at this so how would I go about doing that second flash?
SyslogPlease said:
I can manage the first flash but I'm not really that good at this so how would I go about doing that second flash?
Click to expand...
Click to collapse
You need to place the update file on your ext sdcard then boot into stock recovery and update from ext sdcard.
wildcard30 said:
I had the same issue I used the files from this thread http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 under troubleshooting I first downloaded and then flashed the file to downgrade to nce. Then downloaded the nce to ng3 ota file and sideloaded and flashed in stock recovery after that I have been able to download and update via the ota. hope this helps
Click to expand...
Click to collapse
Last questions are how to go into stock recovery and once I do that its all normal again?
How to boot Samsung Galaxy S5 Recovery Mode:
Power off your device completely.
Boot recovery mode by pressing and holding Volume Up, Home and Power, all at the same time.
Release all buttons when the Galaxy S5 screen flickers and the main Recovery screen will appear.
Once I updated to ng3 through the stock recovery I was able to take the ota updates for 4.4.4 and 5.0 normally.
Thanks, I'm going to try this now. Hope I don't lose any data!
SyslogPlease said:
Thanks, I'm going to try this now. Hope I don't lose any data!
Click to expand...
Click to collapse
you will when you flash through stock recovery.
Back up your data
It all went smoothly and I can update again! Thanks so much!
You are welcome.
I tried the instructions in that thread but I get an error when I try to install the first update.
The error mentions unexpected contents
What I did is copy the file to the SD card, booted into recovery and then selected install from external
What did I do wrong?
Hi there. Thank you so much for this. Question is that I am already on NG3 and I still dont have the update option! Would I need to go to OA1 one? Which I believe is 4.4.4? Then get the update for lollipop? A little confusion. And if that is the case, where can I get the file thing for OA1?
juliusgy said:
I tried the instructions in that thread but I get an error when I try to install the first update.
The error mentions unexpected contents
What I did is copy the file to the SD card, booted into recovery and then selected install from external
What did I do wrong?
Click to expand...
Click to collapse
I have the same problem, except I used adb sidoload
juliusgy said:
I tried the instructions in that thread but I get an error when I try to install the first update.
The error mentions unexpected contents
What I did is copy the file to the SD card, booted into recovery and then selected install from external
What did I do wrong?
Click to expand...
Click to collapse
Did you do the downgrade to NCE through Odin first?
Yes I did. I tried it again and I see that I'm on NG3 now, I guess I have to do the other one Now.
juliusgy said:
Yes I did. I tried it again and I see that I'm on NG3 now, I guess I have to do the other one Now.
Click to expand...
Click to collapse
Once I was on NG3 I was able to upgrade using the OTA.
wildcard30 said:
Once I was on NG3 I was able to upgrade using the OTA.
Click to expand...
Click to collapse
I am on NG3 and I am not getting any OTA for OA1 which is 4.4.4! I need that to go to 5.0? How can I manually update it? Dont care for root and other gimmicks. Completely stock!
ThuGzta said:
I am on NG3 and I am not getting any OTA for OA1 which is 4.4.4! I need that to go to 5.0? How can I manually update it? Dont care for root and other gimmicks. Completely stock!
Click to expand...
Click to collapse
You could always try sideloading the NG3 to OA1 update then flashing through stock recovery from the other thread I mentioned.

[How-To] Unbrick or Flash Back to Stock(NCE) - G900A Only

***The steps below will work on all Bootloader versions except OC4(Android 5.0), Do not use this process if you have taken the OC4 ota update!***
1. Download the G900A_Downgrade_to_NCE.rar and extract the .tar.
2. Go into Download Mode by pressing and holding the Home, Volume Down, and Power keys on your device until the phone powers on and displays warning screen, then press Volume Up key.
3. Flash the G900A_Downgrade_to_NCE.tar using Odin's PDA slot(AP in Odin v3.09+).
Note: The most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Attention! If you have taken the OC4 ota update and need to unbrick after attempting to downgrade try flashing the: G900A_OC4_Stock_Partitions
So why is it that the g900a is the only gs5 that can't downgrade from 5.0? even Verizon can???
I had a different Downgrade to NCE file. Tried this one and my phone is back up and running. Phew!! Thanks so much!!
Is it safe to flash over ND3? I'm not recieving any ota. Will I receive Ota After flashing this?
DIME8611 said:
Is it safe to flash over ND3? I'm not recieving any ota. Will I receive Ota After flashing this?
Click to expand...
Click to collapse
Yes. You can OTA all the way to OC4.
Sent from my SAMSUNG-SM-G900A
Added G900A_OC4_Stock_Partitions to the OP for those that took the OC4 ota update and bricked while attempting to downgrade.
muniz_ri said:
Added G900A_OC4_Stock_Partitions to the OP for those that took the OC4 ota update and bricked while attempting to downgrade.
Click to expand...
Click to collapse
Muniz do u think there will be root method for those on 5.0 ota unrooted? ???
Phone gets stuck up!
For some reason. i tried to unbrick my phone from the rooted stock firmware 5.0 and it ended up with the boot loop. Already tried the downgrade to NCE. Now it gets worse because all I can see so far is the logo of ATT and that's it. Anyone could help me out with that???
NVQT said:
For some reason. i tried to unbrick my phone from the rooted stock firmware 5.0 and it ended up with the boot loop. Already tried the downgrade to NCE. Now it gets worse because all I can see so far is the logo of ATT and that's it. Anyone could help me out with that???
Click to expand...
Click to collapse
I'm sure you probably already tried this but if not pull the battery for a few seconds and then try going back into download mode and try the process again.
How did you upgrade to 5.0 (which method) You may have to provide more detail, there are a lot people who have way more knowledge than I do, but I hope this helps
Good luck and give the forums a search
unk2009 said:
I'm sure you probably already tried this but if not pull the battery for a few seconds and then try going back into download mode and try the process again.
How did you upgrade to 5.0 (which method) You may have to provide more detail, there are a lot people who have way more knowledge than I do, but I hope this helps
Good luck and give the forums a search
Click to expand...
Click to collapse
Thanks for the reply! I actually upgraded to 5.0 by the flashfire method since before that I already got the rooted 4.4.4. Just yesterday, when I left my phone for a while and came back, it started to stick with the bootloop, , the only method which could help it out is to plug it into the power source. I tried everything which includes removing battery and wiping factory downgrading, flashing original firmware, reinstalling the OTA 5.0 update through sdcard. None of that worked. If you have any information to help me out,I would be way happy to listen! Thank you !
I've had this same problem. Are you still bootlooping?
Sent from my SAMSUNG-SM-G900A
THANK YOU...
I'm with archie above - I tried a different downgrade file and it didn't work either - this one DID.
Thanks so much...
Thank you so much for this. Worked perfectly for a downgrade from 4.4.4. You're the best!
Currently installing updates OTA.
Hi muniz, I posted in your KeepRoot for 5.0 thread and then I saw this one. My phone seems to have spontaneously softbricked (system crashes and then it bootloops). Will flashing the stock 5.0 make me lose root?
EDIT: Fixed with a battery pull!
muniz_ri said:
Attention! If you have taken the OC4 ota update and need to unbrick after attempting to downgrade try flashing the: G900A_OC4_Stock_Partitions
Click to expand...
Click to collapse
Just to clarify, my S5 is on the OC4 build. Will I be able to downgrade to KK using the above file, or is it ONLY to fix a device that got bricked while trying to downgrade? If the latter, are OC4 users just hosed? I have scoured this site, but would appreciate links to any instructive threads that I may have missed. Thanks!
muniz_ri said:
***The steps below will work on all Bootloader versions except OC4(Android 5.0), Do not use this process if you have taken the OC4 ota update!***
1. Download the G900A_Downgrade_to_NCE.rar and extract the .tar.
2. Go into Download Mode by pressing and holding the Home, Volume Down, and Power keys on your device until the phone powers on and displays warning screen, then press Volume Up key.
3. Flash the G900A_Downgrade_to_NCE.tar using Odin's PDA slot(AP in Odin v3.09+).
Note: The most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Attention! If you have taken the OC4 ota update and need to unbrick after attempting to downgrade try flashing the: G900A_OC4_Stock_Partitions
Click to expand...
Click to collapse
HI, i flash using this method, everything pass and after rebooting, it got stock on a black screen and the LED light is blue, and i can´t use my pone and i don´t know how to , please help.
---------- Post added at 04:01 PM ---------- Previous post was at 03:56 PM ----------
javierascua said:
HI, i flash using this method, everything pass and after rebooting, it got stock on a black screen and the LED light is blue, and i can´t use my pone and i don´t know how to , please help.
Click to expand...
Click to collapse
and another thing before doing this downgrade i was on 5.0 but using flashfire
Vol4Ever said:
Just to clarify, my S5 is on the OC4 build. Will I be able to downgrade to KK using the above file, or is it ONLY to fix a device that got bricked while trying to downgrade? If the latter, are OC4 users just hosed? I have scoured this site, but would appreciate links to any instructive threads that I may have missed. Thanks!
Click to expand...
Click to collapse
Yes, those that took the OC4 ota are out of luck.
Muniz_ri, thxs very much i use your flash downgrade and solve my problem
Omg i love you!!!!!
It totally work for me, i downgrated from briked lolipop, and safe my phone!!!!!
help please
alright so i accidently flashed the gs5 active kernel onto my g900A and its completely bricked, like i cant even get into download or safemode from power off. please tell me therres a possible solution?!?

Need help downgrading to KitKat 4.4.2 from Lollipop

I've been trying to downgrade to KitKat from Lollipop for the last 4 hours and haven't been able to find the right files to accomplish this. Could someone point me to all the odin files I need to downgrade??
Thanks, Mike
This is the only file you'll need. http://bit.ly/1q98wGU. Place it in the PDA/AP slot. I'd recommend doing a factory restore afterward. This is provided that you have the AT&T variant of the note 3.
Thanks for the file! I just tried to use odin 3.09 to flash it and it completed successfully and after a reboot with the android robot and a progress bar and another reboot it showed the AT&T ball and just stays on a white screen with the AT&T ball and doesn't do anything else..... I then tried an odin with NAND erase ALL and same thing.
Any Ideas?
Thanks, Mike
Try going into the stock recovery, do a factory restore, then reboot. It'll take several minutes to complete the boot (it'll stay on the white AT&T ball boot screen). Just let it sit. Afterwards it should bring you to the factory set up process.
Thanks that solved my problem, just needed to wipe the userdata and it worked perfect, thanks!!! Now if I can only prevent AT&T from updating the phone again!
NEMike said:
Thanks that solved my problem, just needed to wipe the userdata and it worked perfect, thanks!!! Now if I can only prevent AT&T from updating the phone again!
Click to expand...
Click to collapse
Root it with Towelroot, install Titanium Backup and freeze AT&T Software Update.
Could you point me to a safe download location for towelroot? Also what info I found about using towelroot on Note 3 won't work on 4.4.2 ??
Thanks again for all your help really awesome!
NEMike said:
Could you point me to a safe download location for towelroot? Also what info I found about using towelroot on Note 3 won't work on 4.4.2 ??
Thanks again for all your help really awesome!
Click to expand...
Click to collapse
Just go to http://towelroot.com and click on the lambda symbol. It does work on note 3 4.4.2, that's exactly what I am running.
hey andygev......if I were to follow these instructions,would I need to unzip this file? I traded my s5 for a att note 3. ive always had the note brand and didn't like the size of the s5. anywho,im stock. no root LL.....and absolutely hate it. I received the phone with 5.0 installed. sooooo,,,,unzip?
harley1rocker said:
hey andygev......if I were to follow these instructions,would I need to unzip this file? I traded my s5 for a att note 3. ive always had the note brand and didn't like the size of the s5. anywho,im stock. no root LL.....and absolutely hate it. I received the phone with 5.0 installed. sooooo,,,,unzip?
Click to expand...
Click to collapse
Don't unzip the file. If it doesn't end with the .md5 extension when u download it, just change it to md5 and load it into the AP slot.
Thanks again! Took a little bit to get it working (turning off security etc and purchasing the titanium backup pro so I could freeze) but it's working great!!! Thanks again for everything!
andygev35 said:
This is the only file you'll need. http://bit.ly/1q98wGU. Place it in the PDA/AP slot. I'd recommend doing a factory restore afterward. This is provided that you have the AT&T variant of the note 3.
Click to expand...
Click to collapse
Thanks a million! Everything ive found is out-of-date. Much appreciated!

Categories

Resources