Database Develop

[Q] I will pay for the solution to my semi-bricked HTC One M7

Hey Guys,
I have posted another thread but i do not seem to be getting anywhere at present. I am willing to transfer £20 via PayPal to the first person who gets my phone out of this state. I will outline below where i currently stand. My phone will not boot up after a failed flash attempt.
Upon trying to flash ARHD 30.0, my whole phone appears to be wiped, this means Everything. all i have left when trying to "Install from SD Card" are 2 directories on \sdcard. \sdcard\0 & \sdcard\clockworkmod.
When i Choose the option "Install zip from sideload" it shows "failed to open driver control: no such file or directory" twice. I am unable to sideload anything via my computer and "adb devices" shows no devices.
In CWM i am unable to mount or unmount either the SDcard or internal SD card.
Now, when loading up bootloader, it loads fine. If i choose fast boot whilst connected to my computer via usb it shows "fastboot usb" after clicking down 1 option. ADB still however shows "no devices" and i am unable to load anything on.
the only time ADB shows a device is when trying to reboot the phone and it hangs on the HTC welcome screen (the one with the red descriptive text at the bottom).
my phone is as follows:
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.17.3250.14
OpenDSP-v26.120.274.0202
eMMC-boot
apr 12 2013, 12:10:45:-1
The first post with instructions for me to follow will receive the £20 as soon as it is successful.
Thank you great team

sneakers2606 said:
Hey Guys,
I have posted another thread but i do not seem to be getting anywhere at present. I am willing to transfer £20 via PayPal to the first person who gets my phone out of this state. I will outline below where i currently stand. My phone will not boot up after a failed flash attempt.
Upon trying to flash ARHD 30.0, my whole phone appears to be wiped, this means Everything. all i have left when trying to "Install from SD Card" are 2 directories on \sdcard. \sdcard\0 & \sdcard\clockworkmod.
When i Choose the option "Install zip from sideload" it shows "failed to open driver control: no such file or directory" twice. I am unable to sideload anything via my computer and "adb devices" shows no devices.
In CWM i am unable to mount or unmount either the SDcard or internal SD card.
Now, when loading up bootloader, it loads fine. If i choose fast boot whilst connected to my computer via usb it shows "fastboot usb" after clicking down 1 option. ADB still however shows "no devices" and i am unable to load anything on.
the only time ADB shows a device is when trying to reboot the phone and it hangs on the HTC welcome screen (the one with the red descriptive text at the bottom).
my phone is as follows:
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.17.3250.14
OpenDSP-v26.120.274.0202
eMMC-boot
apr 12 2013, 12:10:45:-1
The first post with instructions for me to follow will receive the £20 as soon as it is successful.
Thank you great team
Click to expand...
Click to collapse
hey try getting the official RUU for your device and get back stock software. From there re-root ect.

sneakers2606 said:
Hey Guys,
I have posted another thread but i do not seem to be getting anywhere at present. I am willing to transfer £20 via PayPal to the first person who gets my phone out of this state. I will outline below where i currently stand. My phone will not boot up after a failed flash attempt.
Upon trying to flash ARHD 30.0, my whole phone appears to be wiped, this means Everything. all i have left when trying to "Install from SD Card" are 2 directories on \sdcard. \sdcard\0 & \sdcard\clockworkmod.
When i Choose the option "Install zip from sideload" it shows "failed to open driver control: no such file or directory" twice. I am unable to sideload anything via my computer and "adb devices" shows no devices.
In CWM i am unable to mount or unmount either the SDcard or internal SD card.
Now, when loading up bootloader, it loads fine. If i choose fast boot whilst connected to my computer via usb it shows "fastboot usb" after clicking down 1 option. ADB still however shows "no devices" and i am unable to load anything on.
the only time ADB shows a device is when trying to reboot the phone and it hangs on the HTC welcome screen (the one with the red descriptive text at the bottom).
my phone is as follows:
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.17.3250.14
OpenDSP-v26.120.274.0202
eMMC-boot
apr 12 2013, 12:10:45:-1
The first post with instructions for me to follow will receive the £20 as soon as it is successful.
Thank you great team
Click to expand...
Click to collapse
adb doesnt work in bootloader, thats why it doesnt show anything. get rid of cwm. Get latest twrp img for your device. Make sure you get the img and not the install thing.
load bootloader "fastboot flash recovery twrp**.img"
load twrp and try "adb devices", if it shows up, use "adb push rom.zip /data/media" I choose this directory because everytime I have bricked, "0" doesnt exist. You can go in twrp file explorer and see what directories exist and just send it there. Even if its "adb push rom.zip /" If file starts transferring, it takes a while. Do not pay attention to % as mine has always just sat at 1% and then finished. I recommend the smallest rom you can find, google play edition is pretty small. Once rom is there try installing, remember where you pushed it to as you will have to select it under install.
if not, go to advanced and choose adb sideload, use "adb sideload rom.zip" <-- the sideload has never worked for me. Everytime I bricked, I have used "adb push"
if you cant get adb to work in twrp, you will need to find factory encrypted ruu. The ruu MUST match your hboot,OS, cid, mid. "fastboot getvar all" will tell you your os "firmware", cid, mid. I repeat, MUST match. Do not flash with another firmware. Once you get this thing working again, SOFF so you dont have to worry about bricking and can always fix with ease. You can buy me a pack of smokes if you get it working.

Flash philz touch recovery and try to mount it again
Sent from my HTC One X using xda app-developers app

Download openrecovery-twrp-2.6.3.0-m7.img to your pc from here http://goo.im/devs/OpenRecovery/m7/openrecovery-twrp-2.6.3.0-m7.img
Save the recovery in directory where adb is.
Reboot phone to fastboot usb
Open command window in directory where adb is (hold shift key , then press right click mouse, then select open command window here )
Then type
fastboot flash recovery openrecovery-twrp-2.6.3.0-m7.img
Then
fastboot reboot-bootloader
Then select recovery options
(Use volume key up or down to highlight recovery, then press power to select)
Then as other posts
Select advanced, then sideload
Then in command window
Type
adb sideload nameofrom.zip
Make sure the Rom you're trying to flash is also in directory where adb is .
Ps don't want money to help, just press thanks button if it helps you.
Sent from my HTC One using xda app-developers app

My ADB stopped working after doing a firmware update
kept getting the no devices error figured, out my ADB and fastboot files needed to be updated to the latest version to work again.
you can download the latest adb and fastboot from this guys post...
http://forum.xda-developers.com/showthread.php?t=2430521
you should be able to get adb to work again after that.

Rather than everyone tell him different things, how about we get some more info?
OP, can you connect your Snooper via USB when in fastboot and use the following command
fastboot getvar all
And post up the results (blank out your IMEI and serial number though!)
Once we have that we can give you CORRECT advice and should be able to get it up and running again

EddyOS said:
Rather than everyone tell him different things, how about we get some more info?
OP, can you connect your Snooper via USB when in fastboot and use the following command
fastboot getvar all
And post up the results (blank out your IMEI and serial number though!)
Once we have that we can give you CORRECT advice and should be able to get it up and running again
Click to expand...
Click to collapse
+1
and as paul_59 said, it's not about the money here on xda!!

Thanks for all the help guys,
paul_59 helped me tremendously. It seems my Windows 8.1 wasnt installing the drivers correctly so my device wasnt recognised. Following Pauls instructions i was able to boot back up again. I have left Paul_59 a thanks but i am a man of my word, he has saved me £££'s, £20 is a blessing to give away.

sneakers2606 said:
Thanks for all the help guys,
paul_59 helped me tremendously. It seems my Windows 8.1 wasnt installing the drivers correctly so my device wasnt recognised. Following Pauls instructions i was able to boot back up again. I have left Paul_59 a thanks but i am a man of my word, he has saved me £££'s, £20 is a blessing to give away.
Click to expand...
Click to collapse
I am happy to have helped, like others helped me when I needed help.
Your thanks is sufficient, money that you kindly offered is not required, but thanks for offering.
Sent from my HTC One using xda app-developers app

So I'm having a very similar problem only I do not think fastboot is working correctly i have let is send the recovery img for a very long time and it doesnt seem to be doing anything. also every time I try and use adb sideload it says "error:device not found". also how long on average is it supposed to take fastboot to flash? also when i get it to work it fails and says "remote access denied" .please help

[Q] Android - File - Info error - HTC One

Hi,
I rooted my HTC one last night and then tried to install an add-on Advanced Power Menu mod, but for some unknown reason got stuck into the boot logo issue. I have tried searching on the web for possible solutions, but nothing seems to work for me.
1. ADB is not activated. Hence, can't push any file into my sdcard and flash using custom recovery.
2. RUU file - tried using the RUU zip from HTC1GURU, but getting the error "Read file zipped android-Info.txt failed".
Kindly let me know if anyone can help me as I love this. I believe I haven't bricked it and I am just missing some basics.
I am not an expert in all of this stuff, but able to work around a bit by following instructions.
Eagerly awaiting a reply to my issue.
Mods: Please re-direct me if I am posting in the wrong section and delete this thread.

You should be able to mount the "sdcard" from recovery, and then copy the new ROM.

TWRP > Advanced > Sideload..
then adb sideload romname.zip ?
This doesn't work?
If not, your OS? and output of fastboot getvar all (minus IMEI&SN)

BenPope said:
You should be able to mount the "sdcard" from recovery, and then copy the new ROM.
Click to expand...
Click to collapse
The HTC one only has internal memory and no SD card facility. So, I doubt I can copy anything to the phone and use TWRP

noteebse
SaHiLzZ said:
TWRP > Advanced > Sideload..
then adb sideload romname.zip ?
This doesn't work?
If not, your OS? and output of fastboot getvar all (minus IMEI&SN)
Click to expand...
Click to collapse
I tried ADB SideLoad, but it doesn't work. Seems like the enable usb debugging option is turned off before I got into the problem and hence the device is not recognized.
I am using Windows 7. I am at office right now, but will definitely provide you the details as soon as I reach home.

vivekanandarao said:
The HTC one only has internal memory and no SD card facility. So, I doubt I can copy anything to the phone and use TWRP
Click to expand...
Click to collapse
But the internal memory is partitioned and then some of it mounted at /sdcard, which is usually treated as an external sdcard.

vivekanandarao said:
I tried ADB SideLoad, but it doesn't work. Seems like the enable usb debugging option is turned off before I got into the problem and hence the device is not recognized.
I am using Windows 7. I am at office right now, but will definitely provide you the details as soon as I reach home.
Click to expand...
Click to collapse
In TWRP, there is no USB debugging option. ADB is available in sideload mode.

SaHiLzZ said:
In TWRP, there is no USB debugging option. ADB is available in sideload mode.
Click to expand...
Click to collapse
Ok. But sorry for asking this again. Can you give me a step by step instruction as to what needs to be done now.
In TWRP, if I click on ADB Sideload, it gives me two options
1. Wipe Dalvik Cache
2. Wipe Cache.
I didn't select either and swiped to start Sideload.
I get this message.
ADB Sideload Complete.
Failed

BenPope said:
But the internal memory is partitioned and then some of it mounted at /sdcard, which is usually treated as an external sdcard.
Click to expand...
Click to collapse
Yes, I can see that there is a directory by the name /sdcard. But I really don't know how to copy the files to this directory.
At this moment, I can only access Fastboot & TWRP.

vivekanandarao said:
Yes, I can see that there is a directory by the name /sdcard. But I really don't know how to copy the files to this directory.
At this moment, I can only access Fastboot & TWRP.
Click to expand...
Click to collapse
As I said, in TWRP, mount the sdcard and then use the PC to copy the file. I'm sure this works.

BenPope said:
As I said, in TWRP, mount the sdcard and then use the PC to copy the file. I'm sure this works.
Click to expand...
Click to collapse
I tried following your instructions, but it didn't work.
In TWRP, I get only three options under mount - System, Cache & USB-OTG, but I am unable to select option USB-OTG.
But in My Computer, I can see there is a new Removable Disk appearing everytime when I go under this option but can't open it because of the above.
Feeling a bit low as I don't have any other handset with me, and I am unable to take/make any calls/messages

SaHiLzZ said:
In TWRP, there is no USB debugging option. ADB is available in sideload mode.
Click to expand...
Click to collapse
Hi,
I am back at home and here is the output from FASTBOOT GETVAR ALL
vrsion: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.363.04
version-cpld:None
version-microp: None
version-main: 3.63.708.3
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_u1
platform: HBOOT-8064
modelid: PN0714000
cidnum: HTC__622
battery-status: good
battery-voltage: 4314mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-14eb688c
hbootpreupdate: 11
gencheckpt: 0
Please let me know if this helps and kindly point out, if I have included anything that shouldn't be here.

Just a quick update guys.
I tried to push files using ADB sideload. Fortunate enough that my device was detected and was able to push RUU file & Cyanogenmod files but when I tried flashing either of the zips, it just fails.
I now think I am close enough but the problem is with the files.
Any suggestions please please help me.
One more update
I tried copying the superuser zip and flash it. but every time I am getting the same error.
"Error flashing zip"
"Updating partition details...."

Today, I tried using the RUU file and it was working for the first time. Problem was with the processes running in background. After killing all processes in task manager, I was able to execute RUU.exe but this also failed after 15 minutes due to the wrong version of RUU used.
I then searched a lot on the web but was unable to find any RUU for my phone model which has the OS 3.63.708.3.
I really need help from people now.

At last, I got it fixed folks. Thanks for everyone's guidance. Here is what I did.
1. Flashed the boot.img from the OTA Update for 3.63.708.3 found on HTC1GURU.COM
2. Downloaded Hasoon2000's HTC One All-In-One Toolkit
3. Executed Perm Root from the Toolkit as my SuperSU was missing
4. Executed ADB Sideload a ROM with CM 10.2.0-m7ul
5. Re-boot
vola!!!! your phone is alive now
few points to note here - when I tired to execute the ADB Sideload I got an error
skipping MD5 check : no MD5 file found
assert failed: getprop("ro.product.device") == "
E: Error executing updater binary in zip '/sdcard
E: Error installing zip file.......
this post saved my life.
http://forum.cyanogenmod.com/topic/75631-updated-bootloader-still-getting-assert-failed/
I just removed assert device statement (first few lines from the update-script file) and all worked fine.
Again - Thanks everyone

[SOLVED] htc one is booting in recovery

so i tried to install Android_Revolution_HD-One_81.0 to my htc one
i manage to install it using the AIO kit by hasoon2000 v3.1 and cwm touch
i think i miss some step because after the finish of the installation in wont boot up,it boot in recovery mod(first boot sequence is with the htc logo and the then it restarts itself in recovery and stays there)
so im stuck in the recovery mod with TAMPERED RELOCKED
version: 0.5
version bootloader: 1.57.0000
version baseband: 4T.27.3218.14
version cpld: none
version microp: none
version main:5.12.901.3
version misc: PVT SHIP S-on
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modeling: PN0710000
cidnum: TIM__401
battery status: good
battery voltage: 4011mV
parition-layout: Generic
security: on
build-mode:SHIP
boot-mode: FASTBOOT
commitno-bootloader : dirty-1f512bb6
hbootreupdate: 11
gencheckpt: 0
i stiil have the .rar revolution hd on the sd
what should i do im a bit scared
someone could give me some help please!!??

scriciu said:
so i tried to install Android_Revolution_HD-One_81.0 to my htc one
i manage to install it using the AIO kit by hasoon2000 v3.1 and cwm touch
Click to expand...
Click to collapse
That is your problem right there. You need twrp. (This is in the arhd OP.)

iElvis said:
That is your problem right there. You need twrp. (This is in the arhd OP.)
Click to expand...
Click to collapse
so what would be the next step
ive done oem lock so im blocked in the recovery mode..

scriciu said:
so what would be the next step
ive done oem lock so im blocked in the recovery mode..
Click to expand...
Click to collapse
unlock the bootloader, flash twrp 2.6.3.3 and reflash arhd

Also, you can't boot up with a custom recovery when you relock.

alray said:
unlock the bootloader, flash twrp 2.6.3.3 and reflash arhd
Click to expand...
Click to collapse
it enters in clockworkmode recovery v6.0.3.4 after the unlock..then how i flash twrp?
this it will work?http://forum.xda-developers.com/showthread.php?t=2247900

scriciu said:
it enters in clockworkmode recovery v6.0.3.4 after the unlock..then how i flash twrp?
this it will work?http://forum.xda-developers.com/showthread.php?t=2247900
Click to expand...
Click to collapse
download TWRP 2.6.3.3 for the M7 and save it to your adb/fastboot folder
with your phone in bootloader mode and connected to PC with USB, open a cmd prompt from your adb/fastboot folder:
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
then enter in recovery and flash your rom

alray said:
download TWRP 2.6.3.3 for the M7 and save it to your adb/fastboot folder
with your phone in bootloader mode and connected to PC with USB, open a cmd prompt from your adb/fastboot folder:
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
then enter in recovery and flash your rom
Click to expand...
Click to collapse
ok it booted in recovery project 2.6.3.3 but i cant find the .rar for installation so what is the comand to install it from cmd ?

scriciu said:
ok it booted in recovery project 2.6.3.3 but i cant find the .rar for installation so what is the comand to install it from cmd ?
Click to expand...
Click to collapse
first this should be a zip file, not a rar. You have to push or sideload the file to your phone prior to installing it.
Code:
adb push name_of_rom.zip /sdcard/

alray said:
first this should be a zip file, not a rar. You have to push or sideload the file to your phone prior to installing it.
Code:
adb push name_of_rom.zip /sdcard/
Click to expand...
Click to collapse
im trying to push the file with no succes
in recovery mode-error device not found
in recovery project daemon still not runningerror: cannot connect to daemon
what i do wrong?

im still blocked..i just want to use the phone..it will be great if it will run the cmw but im fine even with the stock
for now it dont boot-up..what should i do?

scriciu said:
im still blocked..i just want to use the phone..it will be great if it will run the cmw but im fine even with the stock
for now it dont boot-up..what should i do?
Click to expand...
Click to collapse
Boot the phone into TWRP
go to your pc fastboot folder
right click / command prompt here
in command window type
adb devices
your serial number here / recovery
type
adb push name_of_rom.zip /sdcard
make sure the rom is in the same folder as adb fastboot

clsA said:
Boot the phone into TWRP
go to your pc fastboot folder
right click / command prompt here
in command window type
adb devices
your serial number here / recovery
type
adb push name_of_rom.zip /sdcard
make sure the rom is in the same folder as adb fastboot
Click to expand...
Click to collapse
it runs all fine until adb push file it gives me: error: device offline while im sure that the phone is in twrp main menu
when adb devices it give my serial and it write offline"SHxxxxxxx offline"

maybe it will be just fine if i install the ruu
can someone explain how to do it and what ruu file to download please???im downloading RUU Zip M7 UL JB 50 HTC Europe 1.20.401.1 Radio 4A.13.3227.06 10.27.1127.01 Release 308001 Signed 2 4 the exe file..it is the right one??
basicaly it seems i dont have any os on the phone.what should i do now..i read aboud the OTG cable..it is an other way to make my phone back to normal?
i really need some help!!!!

scriciu said:
maybe it will be just fine if i install the ruu
can someone explain how to do it and what ruu file to download please???im downloading RUU Zip M7 UL JB 50 HTC Europe 1.20.401.1 Radio 4A.13.3227.06 10.27.1127.01 Release 308001 Signed 2 4 the exe file..it is the right one??
basicaly it seems i dont have any os on the phone.what should i do now..i read aboud the OTG cable..it is an other way to make my phone back to normal?
i really need some help!!!!
Click to expand...
Click to collapse
when you get the device is offline error
reboot the phone and PC and start again... it usually have to do with the adb server still running / stuck from a previous attempt

clsA said:
when you get the device is offline error
reboot the phone and PC and start again... it usually have to do with the adb server still running / stuck from a previous attempt
Click to expand...
Click to collapse
i solve the offline error now im stuck again
i manage to copy it somehow with twrp v2.7.1.1 but it failed to install with this messeage in twrp
E:unable to tount /data/media/twrp/. twrps when trying to read settings file.
E:unable to mount '/data'
Error flashing zip '/sdcard/rom1.zip'
E:unable to mount internal storage
it is something wrong with the S-on??
there is no other way to bring back to life my one?some RUU or something

scriciu said:
i solve the offline error now im stuck again
i manage to copy it What is "it" somehow with twrp v2.7.1.1 but it failed to install with this messeage in twrp
E:unable to tount /data/media/twrp/. twrps when trying to read settings file.
E:unable to mount '/data'
Error flashing zip '/sdcard/rom1.zip'
E:unable to mount internal storage
it is something wrong with the S-on??
there is no other way to bring back to life my one?some RUU or something
Click to expand...
Click to collapse
what did you try and do from TWRP ..those errors are meaningless to me.
were you trying to sideload ? push ? flash ? wipe ?

to install Android_Revolution_HD-One_81.0 .zip file and RUU Zip M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed

scriciu said:
to install Android_Revolution_HD-One_81.0 .zip file and RUU Zip M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
Click to expand...
Click to collapse
Copy paste the command prompt window here
i have no idea what your trying to do or how to fix it

clsA said:
Copy paste the command prompt window here
i have no idea what your trying to do or how to fix it
Click to expand...
Click to collapse
from start to end of the story
in messup my phone and now i have no os at all so i am using the twrp v.2.7.1.1 to try to install the os
i am trying to install from the twrp insallation menu the rom that i downloaded and i pushed it from cmd "adb push filename.zip /sdcard/"
but when i try to install it "swipe to confirm flash" it faield the instalation
i explain it clear enough?
L.E
so this
E:unable to tount /data/media/twrp/. twrps when trying to read settings file.
E:unable to mount '/data'
Error flashing zip '/sdcard/rom1.zip'
E:unable to mount internal storage
is the result of the failed instalation message where the rom1.zip is the zip that i downloaded

[Q] Can't Boot Up Stock ROM. Stuck

*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
M_PUT SHIP S-ON RH
HBOOT-1.57.0000
OpenDSP-v32.120.274.0909
OS-5.502.2
eMMC-bot 2048MB
Apr 22 2014, 01:10:58.0
HTC One (M7) AT&T
^^^^^^^^^^^^^^^^^^^^^^^^^^
Above is my information on my phone when booting up into the fastboot, recovery, factory reset, etc menu
I don't have an OS as well
Now the problem I have here is that I can't load my stock ROM when rebooting. I already loaded up a ZIP file of the specific stock ROM that I'm suppose to be on but nothing happens when on command prompt!
This is what happens:
>fastboot flash zip Guru_Reset_M7_5.12.502.2_clsA.zip
target reported max download size of 1514139648 bytes
sending 'zip' (1245080 KB)...
OKAY [ 57.277s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 180.581s
Very frustrating especially with the fact that there isn't a EXE file version so I can't go and try that way either. Running out of options. Hoping somebody here to diagnosis this situation

AndroidHTC2013 said:
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
M_PUT SHIP S-ON RH
HBOOT-1.57.0000
OpenDSP-v32.120.274.0909
OS-5.502.2
eMMC-bot 2048MB
Apr 22 2014, 01:10:58.0
HTC One (M7) AT&T
^^^^^^^^^^^^^^^^^^^^^^^^^^
Above is my information on my phone when booting up into the fastboot, recovery, factory reset, etc menu
I don't have an OS as well
Now the problem I have here is that I can't load my stock ROM when rebooting. I already loaded up a ZIP file of the specific stock ROM that I'm suppose to be on but nothing happens when on command prompt!
This is what happens:
>fastboot flash zip Guru_Reset_M7_5.12.502.2_clsA.zip
target reported max download size of 1514139648 bytes
sending 'zip' (1245080 KB)...
OKAY [ 57.277s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 180.581s
Very frustrating especially with the fact that there isn't a EXE file version so I can't go and try that way either. Running out of options. Hoping somebody here to diagnosis this situation
Click to expand...
Click to collapse
The Guru Reset your trying to flash is flashed in custom recovery
Unlock the bootloader first then
Flash TWRP 2.6.3.3 >> http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
now boot to recovery and push the Guru reset to the phone
adb push rom.zip /sdcard/
just put the rom in the same folder as adb and fastboot and rename it rom.zip
the last step is to install the rom in TWRP / Install
During the install you can choose to keep the custom recovery you have now or return to stock recovery so you can recieve OTA updates again .. that's up to you

clsA said:
now boot to recovery and push the Guru reset to the phone
adb push rom.zip /sdcard/
just put the rom in the same folder as adb and fastboot and rename it rom.zip
the last step is to install the rom in TWRP / Install
Click to expand...
Click to collapse
Okay up until this point everything was going great except when I typed "adb push rom.zip /sdcard/" (I copied and pasted what you wrote) into the command prompt and this message appeared:
>adb push rom.zip /sdcard/
cannot stat 'rom.zip': No such file or directory
Now what did I do wrong? I renamed the file as rom.zip just like you said and I placed it in the same folder as adb and fastboot. Was I suppose to go to a specific part of TWRP recovery? ADB sideload? I already tried ADB sideload but nothing happened....

AndroidHTC2013 said:
Okay up until this point everything was going great except when I typed "adb push rom.zip /sdcard/" (I copied and pasted what you wrote) into the command prompt and this message appeared:
>adb push rom.zip /sdcard/
cannot stat 'rom.zip': No such file or directory
Now what did I do wrong? I renamed the file as rom.zip just like you said and I placed it in the same folder as adb and fastboot.
Click to expand...
Click to collapse
if your using windows you probably renamed it rom.zip.zip
in the command window type adb push then leave a space and drag the rom.zip to the window now finish the command with a space then /sdcard/

clsA said:
if your using windows you probably renamed it rom.zip.zip
in the command window type adb push then leave a space and drag the rom.zip to the window now finish the command with a space then /sdcard/
Click to expand...
Click to collapse
I don't understand this part; do you mean to actually drag and drop the rom.zip to command prompt? It didn't work
Sorry if I'm making this more harder than it should be, and yes I'm using Windows as my operating system

AndroidHTC2013 said:
I don't understand this part; do you mean to actually drag and drop the rom.zip to command prompt? It didn't work
Sorry if I'm making this more harder than it should be, and yes I'm using Windows as my operating system
Click to expand...
Click to collapse
in the command window type dir and hit enter ... now whats the name of your rom.zip

clsA said:
in the command window type dir and hit enter ... now whats the name of your rom.zip
Click to expand...
Click to collapse
Okay so I left the ZIP file as "rom" and then I re-did the whole process again. After that I finally got that GURU Reset file in the SD card. But when trying to install it it just gave me an error message! I'm assuming that it wasn't compatible with my software even though it match specifically with mines. Do you think I may have gotten the wrong software even though it's HTC One (M7) Sense 6 5.502.2(which was the last stock rom I got before rooting) ? Is there even a version released in the US specifically?

AndroidHTC2013 said:
Okay so I left the ZIP file as "rom" and then I re-did the whole process again. After that I finally got that GURU Reset file in the SD card. But when trying to install it it just gave me an error message! I'm assuming that it wasn't compatible with my software even though it match specifically with mines. Do you think I may have gotten the wrong software even though it's HTC One (M7) Sense 6 5.502.2(which was the last stock rom I got before rooting) ? Is there even a version released in the US specifically?
Click to expand...
Click to collapse
what error message ? did aroma start or did TWRP give the error ?
did you md5 check your download ?
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
MD5: 3b4013265e9134bc6916cf3c5fd14406

clsA said:
what error message ? did aroma start or did TWRP give the error ?
did you md5 check your download ?
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
MD5: 3b4013265e9134bc6916cf3c5fd14406
Click to expand...
Click to collapse
TWRP gave me the message. No I didn't let MD5 check my download... am I suppose to?

AndroidHTC2013 said:
TWRP gave me the message. No I didn't let MD5 check my download... am I suppose to?
Click to expand...
Click to collapse
Please check your downloads

clsA said:
Please check your downloads
Click to expand...
Click to collapse
I just tried intalling MD5 on TWRP and it said:
Updating partition details...
Error flashing zip '/sdcard/md5.zip'
Failed
WHAT?

AndroidHTC2013 said:
I just tried intalling MD5 on TWRP and it said:
Updating partition details...
Error flashing zip '/sdcard/md5.zip'
Failed
WHAT?
Click to expand...
Click to collapse
Wow ... it a pc app just unzip it to your desktop

clsA said:
Wow ... it a pc app just unzip it to your desktop
Click to expand...
Click to collapse
It said that they don't match... Now what?

AndroidHTC2013 said:
It said that they don't match... Now what?
Click to expand...
Click to collapse
re-download it, you can't flash it if it's corrupt

clsA said:
re-download it, you can't flash it if it's corrupt
Click to expand...
Click to collapse
That link for the GURU Reset you gave me didn't work. I re-downloaded it again but still the same result
Is there any other places where I can redownload HTC One M7 Sense 6 AT&T version

AndroidHTC2013 said:
That link for the GURU Reset you gave me didn't work. I re-downloaded it again but still the same result
Is there any other places where I can redownload HTC One M7 Sense 6 AT&T version
Click to expand...
Click to collapse
What ??
Their are 9 mirrors on that link
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274

clsA said:
What ??
Their are 9 mirrors on that link
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
Click to expand...
Click to collapse
I tried all of them. Not one matched! I think something occurred between the day that they were put out and now that caused this to happen...
Want proof? I 've attached a screenshot of what I've been getting. This occurred over the nine different places that the ROM was from
Is there any chance of a EXE file version of this? Or any other places for a complete ZIP file? Oh and just to let you know the website said 1.2 GB, but the actual downloaded file had only 1.18 GB, not sure if this helps or not, just to let you know

AndroidHTC2013 said:
I tried all of them. Not one matched! I think something occurred between the day that they were put out and now that caused this to happen...
Want proof? I 've attached a screenshot of what I've been getting. This occurred over the nine different places that the ROM was from
Is there any chance of a EXE file version of this? Or any other places for a complete ZIP file? Oh and just to let you know the website said 1.2 GB, but the actual downloaded file had only 1.18 GB, not sure if this helps or not, just to let you know
Click to expand...
Click to collapse
man your are something else
try using the actual MD5 in the box that says Paste next to it
3b4013265e9134bc6916cf3c5fd14406
did you actually think the MD5 was 5.502.2 ?????
@Danny201281 ...please help before i shoot myself

clsA said:
man your are something else
try using the actual MD5 in the box that says Paste next to it
3b4013265e9134bc6916cf3c5fd14406
did you actually think the MD5 was 5.502.2 ?????
@Danny201281 ...please help before i shoot myself
Click to expand...
Click to collapse
No actually that was my computer that automatically set it. And, I'm still stuck at the TWRP installation again but this time it says:
Updating partition details...
E: Unable to mount '/cache'
E: Unable to mount '/cache'
E: Unable to mount '/cache'
Sorry I'm losing your patience here, if it helps I'll donate, because I'm getting help at least! I WILL DONATE

AndroidHTC2013 said:
No actually that was my computer that automatically set it. And, I'm still stuck at the TWRP installation again but this time it says:
Updating partition details...
E: Unable to mount '/cache'
E: Unable to mount '/cache'
E: Unable to mount '/cache'
Sorry I'm losing your patience here, if it helps I'll donate, because I'm getting help at least! I WILL DONATE
Click to expand...
Click to collapse
LOL sorry man it's fine, I just expect a lot from those i'm helping.
the cache error is meaningless you erased the cache so you get the error ...it has nothing to do with flashing the guru reset
what happens when you go to install the rom (post a picture if possible)

Phone won't open after format through TWRP..

So, a couple of months ago I deleted videos and wanted to get them back, so I searched a bit and installed TWRP. Anyway, the videos were lost, could not recover anything, so installing TWRP was of no use to me.
I checked last week for updates and found out I have the latest Lollipop update available, so tried to download and install and I couldn't, because of TWRP..
Next thing was to try and uninstall it from the phone, but getting lost inside multiple internet pages, I reached a bad moment and formatted data.. my mistake.
After this my phone won't boot into the system, it always opens me in recovery mode and Team Win menu.
I tried to make my Macbook recognise it as adb device, but it will not do it, whatever I do on terminal with instructions I found again in various pages on the internet..
Now: what I should do? I am desperate, as I don't have a phone and would love to get it back working soon enough.
Any ideas??? Thanks in advance, Kosm.

post the output of "fastboot getvar all". Remove your IMEI and Serialno before posting.

I cannot do this on my Mac, do I certainly need a windows computer?
edit: I found the fastboot folder in my mac, but got this message:
-bash: ./fastboot: cannot execute binary file

kosmkosm said:
I cannot do this on my Mac, do I certainly need a windows computer?
Click to expand...
Click to collapse
Sure you can use fastboot on a mac.
edit: I found the fastboot folder in my mac, but got this message:
-bash: ./fastboot: cannot execute binary file
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1917237

Hello, I also found a windows machine to try, but it makes no difference to trying on my mac.. thing is, I dont think I enabled usg debugging, before I come into this problem, so now that I cannot enter my phone, it doesn't get recognised as a phone anywhere.. it only sees it as D:, where I cannot do nothing..
Can I activate usb debugging from inside TWRP somewhere?
Thanks for supporting my noob questions with such patience!!

kosmkosm said:
Hello, I also found a windows machine to try, but it makes no difference to trying on my mac.. thing is, I dont think I enabled usg debugging, before I come into this problem, so now that I cannot enter my phone, it doesn't get recognised as a phone anywhere.. it only sees it as D:, where I cannot do nothing..
Can I activate usb debugging from inside TWRP somewhere?
Thanks for supporting my noob questions with such patience!!
Click to expand...
Click to collapse
You don't need usb debugging. usb debugging is only needed to use ADB commands when the phone is booted in the OS. You can use FASTBOOT commands from the bootloader and ADB commands from custom recovery both without USB Debugging.
What version of windows is your computer running?
What is your phone hboot version? (you can see when booted in bootloader)
When your phone is booted in bootloader mode/fastboot usb, go in windows device manager. The phone should be listed there if its detected. Is you phone in the list? Does it says "Android USB devices --> My HTC" ?

1. windows 8.1
2. 1.57.0000
3. Yes, it finds it, only when I boot into HBOOT/fastboot USB. If I let it open as it does alone at TWRp, it doesn't find it.

kosmkosm said:
3. Yes, it finds it, only when I boot into HBOOT/fastboot USB.
Click to expand...
Click to collapse
So whats the problem with "fastboot getvar all" ?
Boot your phone in bootloader/fastboot usb mode (hold power and volume down until it reboots to the bootloader or from twrp recovery select "reboot" --> "Bootloader") and then open your command prompt form your adb/fasboot folder on your computer:
Code:
fastboot getvar all
Btw if you want me to reply faster, then quote me using the REPLY button below my posts instead of the "POST REPLY" button at the buttom of the page. I'm no notified when you are not quoting me.

alray said:
So whats the problem with "fastboot getvar all" ?
Boot your phone in bootloader/fastboot usb mode (hold power and volume down until it reboots to the bootloader or from twrp recovery select "reboot" --> "Bootloader") and then open your command prompt form your adb/fasboot folder on your computer:
Code:
fastboot getvar all
Btw if you want me to reply faster, then quote me using the REPLY button below my posts instead of the "POST REPLY" button at the buttom of the page. I'm no notified when you are not quoting me.
Click to expand...
Click to collapse
Sorry, didn't see that. New to the forums, in general!!
Here is the getvar all:
version: 0.5
version-bootloader: 1.57.0000
version-basehand: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.12
version-misc: PUT SHIP S-OFF
serialno: ....................
imei: ....................
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN071****
cidnum: 11111111
battery-status: good
battery-voltage: 4332mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
all: done!
finished. total time: 0.073s

kosmkosm said:
Sorry, didn't see that. New to the forums, in general!!
Here is the getvar all:
version: 0.5
version-bootloader: 1.57.0000
version-basehand: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.12
version-misc: PUT SHIP S-OFF
serialno: ....................
imei: ....................
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN071****
cidnum: 11111111
battery-status: good
battery-voltage: 4332mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
all: done!
finished. total time: 0.073s
Click to expand...
Click to collapse
Download and save this rom to the root of your phone storage: https://www.androidfilehost.com/?fid=95916177934521261
then in twrp recovery select "install" then choose "One_6.09.401.12_odexed.zip"
then you can re flash the stock recovery which can be found here: https://www.androidfilehost.com/?fid=95864024717072472
Save it in the same folder where you have adb and fastboot on your computer. WIth your phone booted in bootloader/fastboot usb mode:
Code:
fastboot flash recovery M7_UL_Stock_Recovery_6.09.401.12.img
fastboot erase cache
fastboot reboot
Then you are back to 100% stock and ready to take the ota update.

alray said:
Download and save this rom to the root of your phone storage: https://www.androidfilehost.com/?fid=95916177934521261
then in twrp recovery select "install" then choose "One_6.09.401.12_odexed.zip"
then you can re flash the stock recovery which can be found here: https://www.androidfilehost.com/?fid=95864024717072472
Save it in the same folder where you have adb and fastboot on your computer. WIth your phone booted in bootloader/fastboot usb mode:
Code:
fastboot flash recovery M7_UL_Stock_Recovery_6.09.401.12.img
fastboot erase cache
fastboot reboot
Then you are back to 100% stock and ready to take the ota update.
Click to expand...
Click to collapse
Thank you for the quick reply. I am downloading the files now. How can I save this rom to the root of my phone storage? HTC sync manager doesn't see my phone.. :/
edit: This way?
adb push [source] [destination]
Function: Copy files from your computer to your phone.
The push command allows you to copy files from your computer to your phone without touching your device. This is particularly handy for copying large files from your computer to your phone like movies or ROMs. In order to use this command, you'll need to know the full file path for both your source and destination. If the file you want to copy is already in your tools folder (where ADB lives), you can simply enter the name of the file as the source.

kosmkosm said:
Thank you for the quick reply. I am downloading the files now. How can I save this rom to the root of my phone storage? HTC sync manager doesn't see my phone.. :/
edit: This way?
adb push [source] [destination]
Function: Copy files from your computer to your phone.
The push command allows you to copy files from your computer to your phone without touching your device. This is particularly handy for copying large files from your computer to your phone like movies or ROMs. In order to use this command, you'll need to know the full file path for both your source and destination. If the file you want to copy is already in your tools folder (where ADB lives), you can simply enter the name of the file as the source.
Click to expand...
Click to collapse
Get rid of HTC sync, it can cause issue when using adb and fastboot. Uninstall it (but don't uninstall the drivers).
Then you can use adb push like you said:
Code:
adb push name_of_rom.zip /sdcard
Command prompt will be unresponsive for like 5-10 minutes, its normal.
Or if you have twrp 2.8.4.0+ you will see your phone like a storage device on your computer when booted in recovery so you just need to drag and drop the file to your storage.

alray said:
Get rid of HTC sync, it can cause issue when using adb and fastboot. Uninstall it (but don't uninstall the drivers).
Then you can use adb push like you said:
Code:
adb push name_of_rom.zip /sdcard
Command prompt will be unresponsive for like 5-10 minutes, its normal.
Or if you have twrp 2.8.4.0+ you will see your phone like a storage device on your computer when booted in recovery so you just need to drag and drop the file to your storage.
Click to expand...
Click to collapse
too bad I don't have a new version of TWRP, checked and it is 2.6.3.0..
got rid of HTC sync, but kept the drivers as is. Also now that the zip is downloaded, I tried to run the command 'adb push', but it gives me error: device not found... is that logical? :/
I am desperate, seems that nothing works for me, what am I doing wrong?

kosmkosm said:
too bad I don't have a new version of TWRP, checked and it is 2.6.3.0..
got rid of HTC sync, but kept the drivers as is. Also now that the zip is downloaded, I tried to run the command 'adb push', but it gives me error: device not found... is that logical? :/
I am desperate, seems that nothing works for me, what am I doing wrong?
Click to expand...
Click to collapse
Your phone drivers are not installed correctly. When booted in twrp recovery go in windows device manager again. Is the device listed or its a " ! " logo? If yes then install the drivers: http://www.mediafire.com/download/msfud4uem3gew2d/HTC-Mobile-Driver_v4.14.0.001.exe
You might want to update your twrp as well, will be easier to deal with the rom.
you can find twrp 2.8.5.0 here: http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.8.5.0-m7.img
save it in the same folder where you have adb and fastboot installed. Reboot your phone in bootloader mode / fastboot usb
Code:
fastboot flash recovery openrecovery-twrp-2.8.5.0-m7.img
fastboot erase cache
fastboot reboot-bootloader
Then enter in recovery mode, you should see your phone when going to "My computer" --> "One". Copy the rom to "My Computer\One\Internal Storage"
then in twrp select "install" and then choose the rom and swipe to install.

alray said:
Your phone drivers are not installed correctly. When booted in twrp recovery go in windows device manager again. Is the device listed or its a " ! " logo? If yes then install the drivers: http://www.mediafire.com/download/msfud4uem3gew2d/HTC-Mobile-Driver_v4.14.0.001.exe
You might want to update your twrp as well, will be easier to deal with the rom.
you can find twrp 2.8.5.0 here: http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.8.5.0-m7.img
save it in the same folder where you have adb and fastboot installed. Reboot your phone in bootloader mode / fastboot usb
Code:
fastboot flash recovery openrecovery-twrp-2.8.5.0-m7.img
fastboot erase cache
fastboot reboot-bootloader
Then enter in recovery mode, you should see your phone when going to "My computer" --> "One". Copy the rom to "My Computer\One\Internal Storage"
then in twrp select "install" and then choose the rom and swipe to install.
Click to expand...
Click to collapse
I ran the drivers installer, told me they exist, so did a repair.
Later, I was able to run the command and write the TWRP 2.8.5.0 recovery properly.
I restarted the phone to enter recovery mode, but it gets stuck forever in the first white page, saying Entering recovery..., the HTC logo and the message 'this build is for development purposes...blah blah'. I did all as you said.

kosmkosm said:
I ran the drivers installer, told me they exist, so did a repair.
Later, I was able to run the command and write the TWRP 2.8.5.0 recovery properly.
I restarted the phone to enter recovery mode, but it gets stuck forever in the first white page, saying Entering recovery..., the HTC logo and the message 'this build is for development purposes...blah blah'. I did all as you said.
Click to expand...
Click to collapse
Try to restore your phone using a RUU then. YOu have s-off, super CID and "super MID". you can use any RUU you want. The latest version is 7.19.401.2 and available here: https://drive.google.com/file/d/0B17smFr95pleSFhvZHd2a0RkTFE/view. Rename the file "ruu" (ruu.zip) and save it in the same folder where you have adb and fastboot
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot

alray said:
Try to restore your phone using a RUU then. YOu have s-off, super CID and "super MID". you can use any RUU you want. The latest version is 7.19.401.2 and available here: https://drive.google.com/file/d/0B17smFr95pleSFhvZHd2a0RkTFE/view. Rename the file "ruu" (ruu.zip) and save it in the same folder where you have adb and fastboot
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
Click to expand...
Click to collapse
renamed to ruu, saved in the same folder, 'fastboot oem rebootRUU' finished in 0.047 secs, then tried to 'fastboot flash zip ruu.zip', but the fastboot.exe quits...

kosmkosm said:
renamed to ruu, saved in the same folder, 'fastboot oem rebootRUU' finished in 0.047 secs, then tried to 'fastboot flash zip ruu.zip', but the fastboot.exe quits...
Click to expand...
Click to collapse
try with this fastboot.http://forum.xda-developers.com/showpost.php?p=59412137&postcount=38
looks like the newer ruu must be flashed with htc_fastboot unlike older ones.

alray said:
try with this fastboot.http://forum.xda-developers.com/showpost.php?p=59412137&postcount=38
looks like the newer ruu must be flashed with htc_fastboot unlike older ones.
Click to expand...
Click to collapse
you are right! downloaded the htc_fastboot and it started sending the ruu.zip. Fingers crossed, I will let you know how it goes. Thanks again for the continuous support!

kosmkosm said:
you are right! downloaded the htc_fastboot and it started sending the ruu.zip. Fingers crossed, I will let you know how it goes. Thanks again for the continuous support!
Click to expand...
Click to collapse
Any news? Is your phone booting now?