Database Develop

CyanogenMod 10.1 Experimental Builds [p1c cdma]

Q&A isn't the ideal place, but I'm not yet able to post in the dev forum, so...
I've been using the cm10.1 experimental build (p1c) posted by cdesai for the last week or so.
It's very smooth but about once a day the Sleep of Death (I think) strikes.
It never happens when I'm using the tab. A full reset brings it back, but if I don't catch it quickly it will very rapidly drain my battery and turn the tab into a small space heater. Aggravating.
Anyone else have the issue? Any ideas?
Sent from my SCH-I800 using Tapatalk 2

set your brightness to 20% and always turn-off wifi when its not in use ....its works for me....played my tab for 30 minutes and my tablet consumed only 15% of the battery
SORRY FOR MY BAD ENGLISH
*i also turn off mobile data......when i dont need to use the internet....

frrambo said:
Q&A isn't the ideal place, but I'm not yet able to post in the dev forum, so...
I've been using the cm10.1 experimental build (p1c) posted by cdesai for the last week or so.
It's very smooth but about once a day the Sleep of Death (I think) strikes.
It never happens when I'm using the tab. A full reset brings it back, but if I don't catch it quickly it will very rapidly drain my battery and turn the tab into a small space heater. Aggravating.
Anyone else have the issue? Any ideas?
Sent from my SCH-I800 using Tapatalk 2
Click to expand...
Click to collapse
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.

imadork said:
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
Click to expand...
Click to collapse
Thanks, I'll give it a shot.

imadork said:
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
Click to expand...
Click to collapse
I always get encryption failed when installing alroger builds - I guess you are not running CDMA (p1c) ?
If you are using a p1c then you are lucky to have alroger working.
cdesai builds work great on p1c but usb tether doesn't seem to work on any CM10.x build yet which is annoying

Re: CyanogenMod 10.1 Experimental Builds
Yup.
I tried alroger's p1c and had the encryption problem. Back to cdesai's build for now.
Sent from my SCH-I800 using Tapatalk 2

frrambo said:
Yup.
I tried alroger's p1c and had the encryption problem. Back to cdesai's build for now.
Click to expand...
Click to collapse
Yeah alroger's newest builds are broken on p1c but if you go back to his first p1c release it actually works okay http://goo.gl/QBsmn
Actually I came back to the tab tonight and it was constantly rebooting in a loop so I may go back to cdesai too.
The one I am really waiting for is AOKP 4.2.2 for p1c, apparently his build machine is broken but hopefully he will post it soon.
But I cannot do usb tether or otg in any 4.1.x or 4.2.x build yet which is frustrating.
CM9.1 is very stable but missing all the 10.1 niceties.
You should put "p1c cmda" in the thread title here so we can have a 10.1 "club" for p1c folks.

I am running alrogers latest builds without any problem on my p1. Fast reliable and without any problems

I noticed fewer problems of unattended sleep or reboot after I flushed Dalvik and partition caches.
But the device still drains battery faster than the lastest CM10 nightlies (screenshots included) did, mostly because of the radio (30% - veille GSM) and while inactive (21% - tablette inactive).
Do you experience the same? Do you know where it could come from? (since I'm not able to post to dev section yet, too).

Re: CyanogenMod 10.1 Experimental Builds
If you have unknown baseband also, then the cause has been widely known. Broken modem.
Download JPZ modem zip from the development forum, unzip it and paste modem.bin to /radio to replace the one there.
Sent from my GT-I9300 using xda app-developers app

alroger's newest build from 20130328 now has working usb tether and works on my cdma (p1c)
but it's missing an adb toggle, cannot find it for the life of me
aha! found it - in CM10 you have to go to settings -> about tabet -> build number -> tap 7 times (to enable dev mode)

So several days after reflashing cdesai's experimental build I'm happy to report only one SoD compared to one or two previously.
With a bootlooping recovery, I used Heimdall to re-stock (mostly, I used a CWM kernal). I then reflashed with the same proceedure as before, wiping cache/dalvic, flashed gapps and I'm good to go.
Aside from the USB tether and BT issues (maybe someday...), my only problem now is that the screen orientation is sometimes unresponsive. Even the battery life is good, better than I had on CM 9.
I've not had any radio problems, at least none that Better Battery Stats could show me. The modem is the likely culprit.
Good suggestion on the title change p1c needs more love! :highfive:

Of course now with _ck_'s news that alroger has USB tether working, I'm tempted to try it again. Just can't leave well enough alone.

Just came back to my tablet to wake it up and the screen shows "encryption unsuccessful" wtf
Maybe alrodger build is not quite ready.
Spent an hour getting everything right again but not messing around this time, did both Titanium backup and clockwork backup.

[Q] streaming flash content cm10.1 4.2.2 issue

Any help would be greatly appreciated.Hello all thank you for you time. I'm running cm10.1 unofficial nightly build 05.22.13 on my touchpad with the latest adobe flash apk and Firefox app from Googleplay.
The issue that I'm having is my display would go to sleep as configure per my display setting while I'm streaming flash content at full screen. Not sure why this is happening and not sure if this is just my device. I didn't have this issue with cm9. Only notice this with cm10 and now 10.1. Theodd thing is that this issue is also happening with my nook color and nexus 7 with cm10.1
My current work around is setting display to time out 30 mins and touch the display every now and then.
Any help would be greatly appreciated
Thanks again

I did a quick search and found this app for you. I haven't tried it, but its worth a try.
https://play.google.com/store/apps/details?id=it.android.keepscreenon

nickster1 said:
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
Thank you. I went back to cm9 for stability but will keep this app in the back pocket . I was just curious to know if I was the only one experiencing this flash problem or its the same for everyone else. If its just me I wonder wat I did wrong with the install
Click to expand...
Click to collapse

imanobe said:
nickster1 said:
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
Thank you. I went back to cm9 for stability but will keep this app in the back pocket . I was just curious to know if I was the only one experiencing this flash problem or its the same for everyone else. If its just me I wonder wat I did wrong with the install
Click to expand...
Click to collapse
Flash is being phased out and anything past 4.1 either doesnt work or partially works.
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse

gradular said:
imanobe said:
Flash is being phased out and anything past 4.1 either doesnt work or partially works.
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse
Flash is phased out but that doesn't mean you can't get it to work well. Its working great for me on my phone and tablet. Both running 4.2.2
Click to expand...
Click to collapse

nickster1 said:
gradular said:
Flash is phased out but that doesn't mean you can't get it to work well. Its working great for me on my phone and tablet. Both running 4.2.2
Click to expand...
Click to collapse
I,ve been flasing custom roms since the touchpad and nook color was out so i'm curious to know what I did wrong with these installs. I've had this issue happened to me with multiple devices. Nexus 7 nook color and my touchpad . All install were done with complete wipe of device.
Click to expand...
Click to collapse

imanobe said:
nickster1 said:
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
Thank you. I went back to cm9 for stability but will keep this app in the back pocket . I was just curious to know if I was the only one experiencing this flash problem or its the same for everyone else. If its just me I wonder wat I did wrong with the install
Click to expand...
Click to collapse
Flash has never worked well on 4.1+ ROMs on the Touchpad in my experience. Flash isn't supported on 4.1+ but on other devices its still smooth so its a Touchpad Android issue not a Flash issue.
If you want Flash stay with CM9. I went back to CM9 after being on CM10 a while because I wanted stable Flash and couldn't really think of any new CM10 features that I needed.
Click to expand...
Click to collapse

spunker88 said:
imanobe said:
Flash has never worked well on 4.1+ ROMs on the Touchpad in my experience. Flash isn't supported on 4.1+ but on other devices its still smooth so its a Touchpad Android issue not a Flash issue.
If you want Flash stay with CM9. I went back to CM9 after being on CM10 a while because I wanted stable Flash and couldn't really think of any new CM10 features that I needed.
Click to expand...
Click to collapse
First and foremost thank you for your input. It is true that flash is no longer supported on 4.1 + but it can and should be stable once installed. One example I can provide is with my nexus seven. With stock rom and latest flash APk installed it runs Smoth no problem but when it is rooted and custom rom installed display issue occurs. There must be some config in the rom where display would remain awake when certain apps are running at full screen. Also its hard to see that its a touch pad issue because this is happening to other devices that I've installed custom 4.1+ rom. I'm currently back with cm9. For stability until cm 10.1 is more stable will switch.
Click to expand...
Click to collapse

imanobe said:
spunker88 said:
First and foremost thank you for your input. It is true that flash is no longer supported on 4.1 + but it can and should be stable once installed. One example I can provide is with my nexus seven. With stock rom and latest flash APk installed it runs Smoth no problem but when it is rooted and custom rom installed display issue occurs. There must be some config in the rom where display would remain awake when certain apps are running at full screen. Also its hard to see that its a touch pad issue because this is happening to other devices that I've installed custom 4.1+ rom. I'm currently back with cm9. For stability until cm 10.1 is more stable will switch.
Click to expand...
Click to collapse
Samsung probably built in some code to be more flash-compitable.
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse

Flash runs smooth on my Droid3 with CM10.1 even though the rom is far from stable. Also runs well on the Razr with stock 4.1.2 update. Its just on the Touchpad that 4.1+ have issues with flash in my experience.
Sent from my cm_tenderloin using Tapatalk HD

[Q] Most Stable ROM

Hi everyone,
I recently installed android on my friend's Touch Pad. Which ROM do you recommend as the most stable/usable ROM? (While being new and hopefully rather current as - like Android 4.1 or 4.2). My friend is definitely not familiar with flashing or anything like that, but she knows how to use android. As I will be moving out of the state at the end of this week, I want to leave her with a good ROM that will be nice and stable and easy for her to use. What do you all suggest? Thanks!

Tough one just have to flash them all and test I would go for cm10 night lies because they'll constantly update it and all you have to do is go into settings and update it.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
Tough one just have to flash them all and test I would go for cm10 night lies because they'll constantly update it and all you have to do is go into settings and update it.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I'm trying a couple. I had a 4.2.2 mashup of CM, AOKP, and PA. It was a bit buggy, and probably too confusing for my friend. She does really like the PIE controls though so I'm trying to get a stable one with those. If not I'll just go for the CM10 nightlies probably. Thank you sir!

for me, the most stable roms are the standard CM9 nightlies.
they benchmark higher than any of the 4.2.2 builds, and has working bluetooth and no UI issues as noted on the CM10 and CM10.1 builds.
every few weeks I backup my HP touchpad and install some of the latest roms and always come back to CM9. it just works better, and best of all, it has a better UI (while the tablet UI mod helps with CM10 and 10.1, it does not fix all of the issues. and for CM10.1 there is no 120dpi so you are stuck with everything being oversized for the screen
while with cm9 all you need is the CWM flashable 120dpi patch which still works with the latest nightly builds and takes care of any market place issues.
Overall for everyday use, CM9 is still the way to go.
I attached the 120dpi patch that I use. It only works on CM9
screenshot of 120DPI http://i.imgur.com/qnJ1BKM.jpg

dag1337 said:
Hi everyone,
I recently installed android on my friend's Touch Pad. Which ROM do you recommend as the most stable/usable ROM? (While being new and hopefully rather current as - like Android 4.1 or 4.2). My friend is definitely not familiar with flashing or anything like that, but she knows how to use android. As I will be moving out of the state at the end of this week, I want to leave her with a good ROM that will be nice and stable and easy for her to use. What do you all suggest? Thanks!
Click to expand...
Click to collapse
I've used both CM9 & CM10 and found them to be very stable.

I downloaded. And installed the LCD density trick. Fonts are too small for me. How can I undo it?
Sent from my cm_tenderloin using Tapatalk 2

ccheung said:
I downloaded. And installed the LCD density trick. Fonts are too small for me. How can I undo it?
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
If you are on CM10 and the 120dpi is too small, to undo it flash the 160dpi file
the CWM dpi patches are the only ones that have worked for me, I have tried android 4.1 and 4.2 and the only recommendations for adjusting the dpi is using apps from the market place and all of the recommended ones for me have not worked, most causes the rom to not boot fully.
The main thing holding me back from going to anything higher than CM9, is the lack of stable bluetooth support, the new android 4.1+ UI that is just a more screen space wasting version of the cellphone UI (not tablet optimized at all), and the issue with no 120DPI mod working with it.

Have been using CM9 for a long time with no complaints other than battery life. I think there may be some kernels that are better, but I like when the battery runs out and my kids have to put it down. A timer of sorts. I have not found a combination that can compare to WebOS for battery life. But, Android has all the latest stuff now for the kids, so, Android it is. I still use WebOS, though, when I can.

CM10.1 nightlies by milaq have been very stable for me. I experienced random crashing of the default browser in CM9 nightlies but none in CM10.1.
Obviously the missing Bluetooth in CM10.1 may be an issue for some but I haven't really used BT for anything.

Iipe said:
CM10.1 nightlies by milaq have been very stable for me. I experienced random crashing of the default browser in CM9 nightlies but none in CM10.1.
Obviously the missing Bluetooth in CM10.1 may be an issue for some but I haven't really used BT for anything.
Click to expand...
Click to collapse
I forgot to mention that no more random reboots for me with CM10.1. They were daily with CM9.

Try milaq's new cm10.2 nigtly! It's even more stable and faster!

Zippo2000 said:
Try milaq's new cm10.2 nigtly! It's even more stable and faster!
Click to expand...
Click to collapse
i beg to differ. I would go with shumash 4.2.2. ROM

[Q] I need a stable AOSP room with good battery life, can you help?

THIS IS URGENT
I'm in dire need of help, this is for my gf's phone,
It all started when she was suffering with lack of space on her phone, so I tought well, AOSP roms occupy less space so I went and installed a Maclaw's rom, the one with CM10.2, she says it phone have a battery life of 1 to 3 hours with this rom, so I tried a CM11 rom and she now has a decent battery life but with constant reboots.
The thing is she is going on a 20 day trip tomorrow with her family and I wanna give her something stable with a good battery life, I dont care if its AOSP or stock based actually, I just want something stable until she gets back and I can deal with that situation. If its an AOSP based better, but I need a stable one with a good batery life, something that wont leave her hanging by a thread when she is on the road, please help!

Soy_Filipo said:
THIS IS URGENT
I'm in dire need of help, this is for my gf's phone,
It all started when she was suffering with lack of space on her phone, so I tought well, AOSP roms occupy less space so I went and installed a Maclaw's rom, the one with CM10.2, she says it phone have a battery life of 1 to 3 hours with this rom, so I tried a CM11 rom and she now has a decent battery life but with constant reboots.
The thing is she is going on a 20 day trip tomorrow with her family and I wanna give her something stable with a good battery life, I dont care if its AOSP or stock based actually, I just want something stable until she gets back and I can deal with that situation. If its an AOSP based better, but I need a stable one with a good batery life, something that wont leave her hanging by a thread when she is on the road, please help!
Click to expand...
Click to collapse
did you turn off some setting?like location?google location setting? and try slimrom from maclaw,i have use that rom and it stable and battery life so good

masjack said:
did you turn off some setting?like location?google location setting? and try slimrom from maclaw,i have use that rom and it stable and battery life so good
Click to expand...
Click to collapse
What are you using right now? Are you still using it?

Soy_Filipo said:
What are you using right now? Are you still using it?
Click to expand...
Click to collapse
yep im still using slim rom,never had random reboot,battery life good almost 8-10 hours without charging with 3G signal,play some game,using some media social and other XD.

Soy_Filipo said:
What are you using right now? Are you still using it?
Click to expand...
Click to collapse
Ok I'm going to use that one, latest one right? It has no bugs? I've read that one has some weird screen glitches
Sent from my Galaxy Nexus using xda app-developers app

Soy_Filipo said:
Ok I'm going to use that one, latest one right? It has no bugs? I've read that one has some weird screen glitches
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
idk i dont feel that glitch just a normal rom XD.

CM 10.2 and CM 11 are working flawlessly and completely bug-free. You shouldn't get any reboots nor a poor battery life. I'm getting about 12-14 hours of intense use with kitkat.
Slimrom is not so optimized as cm 11, which is actually the last and more up-to-date rom that maclaw realeased. Try again. Are you following all the steps? Try a clean install, format system, data, cache, and dalvik-cache. Or you could just simply flash odin. Tell us how it went later

agusaon said:
CM 10.2 and CM 11 are working flawlessly and completely bug-free. You shouldn't get any reboots nor a poor battery life. I'm getting about 12-14 hours of intense use with kitkat.
Slimrom is not so optimized as cm 11, which is actually the last and more up-to-date rom that maclaw realeased. Try again. Are you following all the steps? Try a clean install, format system, data, cache, and dalvik-cache. Or you could just simply flash odin. Tell us how it went later
Click to expand...
Click to collapse
Thanks, I will try the latest cm11 then, I'm gonna format everything again

[Kernel] 4.2.2 ION/PMEM

This is taken from cars1198 cm10.1 rom. ALL CREDITS TO HIM all i did was extract it out for others to use on other 4.2.2 based roms.
CLARIFICATION UPDATE:
PMEM BASED ROMS wifi and camcoder breaks. Everything else should work including newer maps and better 3d performance.
ONLY ROMS THAT ARE ION BASED ARE IN MASS CM BY CARS1198
AND JFBS CM11
http://d-h.st/AtF

TripFX said:
This is taken from cars1198 cm10.1 rom. ALL CREDITS TO HIM all i did was extract it out for others to use on other 4.2.2 based roms. I have tested it on AOIP 1.5 and it works fine aside from camcorder. Thanks cars1198
http://d-h.st/AtF
Click to expand...
Click to collapse
Very nice! I'm not sure what I did, but the camcorder apparently now works on my CM 10.1 install. The first recording played back garbled, but now it records perfectly. Maps should now work great on 4.2 roms.

Jorge_007 said:
Very nice! I'm not sure what I did, but the camcorder apparently now works on my CM 10.1 install. The first recording played back garbled, but now it records perfectly. Maps should now work great on 4.2 roms.
Click to expand...
Click to collapse
it does i just test it. ill see if camcorder works in aoip. did noticed that wifi is broke in aoip but i dirty flashed. will test clean install later tonite. working on cm11 fix now.

TripFX said:
it does i just test it. ill see if camcorder works in aoip. did noticed that wifi is broke in aoip but i dirty flashed. will test clean install later tonite. working on cm11 fix now.
Click to expand...
Click to collapse
Wifi worked on CM 10.1, so a clean flash may solve your problem. Good luck on the fix
---
I tested a clean install of AOIP and Wi-Fi is broken. For those of you who want to try CM 10.1 with ION/PMEM here is the link to the download. "http://d-h.st/8QA"

Jorge_007 said:
Wifi worked on CM 10.1, so a clean flash may solve your problem. Good luck on the fix
---
I tested a clean install of AOIP and Wi-Fi is broken. For those of you who want to try CM 10.1 with ION/PMEM here is the link to the download. "http://d-h.st/8QA"
Click to expand...
Click to collapse
thanks for the test. wondering about aokp if wifi will break or not.

TripFX said:
This is taken from cars1198 cm10.1 rom. ALL CREDITS TO HIM all i did was extract it out for others to use on other 4.2.2 based roms. I have tested it on AOIP 1.5 and it works fine aside from camcorder. Thanks cars1198
http://d-h.st/AtF
Click to expand...
Click to collapse
I am psyched to try it with Slimbean. To flash a new kernel, do I need to wipe anything first, or is a dirty flash sufficient? I will make a nandroid first, just to make sure everything is copacetic. Exactly what does ION/PMEM give us that we did not have? Besides finally being able to upgrade to the latest build of Maps?

Proud2banoob said:
I am psyched to try it with Slimbean. To flash a new kernel, do I need to wipe anything first, or is a dirty flash sufficient? I will make a nandroid first, just to make sure everything is copacetic. Exactly what does ION/PMEM give us that we did not have? Besides finally being able to upgrade to the latest build of Maps?
Click to expand...
Click to collapse
some 3d games i got to try work better. dirty flash should be fine. report any errors you find with slimbeam so i can add it to notes

TripFX said:
some 3d games i got to try work better. dirty flash should be fine. report any errors you find with slimbeam so i can add it to notes
Click to expand...
Click to collapse
Well, I just installed it and it seems fine. The phone is definitely faster. I will try to upgrade maps. Skype I'm leaving with the old version for other reasons.
It's like a new phone.... So smooth and fast. Wow! Still restarts if I try to start USB download mode, but I suspect I would have to reload the rom to fix that and it's not a big enough problem. It's too bad I lost my little startup screen android, but such is life.
Oops. Wi-Fi is no good. I will see if I hit the 4g ceiling. I suspect I will. Last time I went without Wi-Fi I hit the ceiling in a week. I don't want to wipe anything before I install, as this is my work phone.
Camera works but camcorder does not. So, seemingly the same problems others have had. I honestly did not try the camcorder with the old kernel, though.
Sent from my SGH-T679 using xda app-developers app

Proud2banoob said:
Well, I just installed it and it seems fine. The phone is definitely faster. I will try to upgrade maps. Skype I'm leaving with the old version for other reasons.
It's like a new phone.... So smooth and fast. Wow! Still restarts if I try to start USB download mode, but I suspect I would have to reload the rom to fix that and it's not a big enough problem. It's too bad I lost my little startup screen android, but such is life.
Oops. Wi-Fi is no good. I will see if I hit the 4g ceiling. I suspect I will. Last time I went without Wi-Fi I hit the ceiling in a week. I don't want to wipe anything before I install, as this is my work phone.
Camera works but camcorder does not. So, seemingly the same problems others have had. I honestly did not try the camcorder with the old kernel, though.
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
using 10.1cm cars1198 cm mass op works perfectly camcorder, wifi, and all which is where i took this kernel from.

TripFX said:
using 10.1cm cars1198 cm mass op works perfectly camcorder, wifi, and all which is where i took this kernel from.
Click to expand...
Click to collapse
Annoying I can't get wifi to work. I guess Slimroms took out a key component when they made the rom "slimmer."

Proud2banoob said:
Annoying I can't get wifi to work. I guess Slimroms took out a key component when they made the rom "slimmer."
Click to expand...
Click to collapse
no its the same with aoip and aokp and im sure others as cars mentioned it was for ion based roms.

Proud2banoob said:
Annoying I can't get wifi to work. I guess Slimroms took out a key component when they made the rom "slimmer."
Click to expand...
Click to collapse
Most definitely not that is ur dev n kernels problem
HERCULES S²

Maybe slims kernel has issues or maybe a bad flash. Try reflashing or another gapps. People are having problems with kernels/gapps on the jfbs rom.

helppppp
the kernel filee is missing im on a cm 10.1 and i want a good kernel so i can optimize my phone ..... please help

Andresakapaco04 said:
the kernel filee is missing im on a cm 10.1 and i want a good kernel so i can optimize my phone ..... please help
Click to expand...
Click to collapse
its old you are much better off getting the cm10.1 rom from cars1198 cm mass op. all 3 versions are on there 10.1, 10.2 and 11