[Q] Signal Issue - RAZR i Q&A, Help & Troubleshooting

I flashed omars rom about a week ago and everything was going great until this morning. I woke up and have no signal at all. Rang my operator, they said there's nothing wrong with the network. I've tried everything I can think but nothing. I've flashed different roms, kernels and ended up using rsd lite to go back to stock, and still no good. Anyone have any ideas? Any help would be greatly appreciated!!

It can be hardware issue. If flashing full stock rom didn't help it shouldn't be software issue.
Download any app to enter radio settings and change to only 2g but it must be changed in radio settings, not just phone menu setting. If it wint help on stock full rom for 90% it gonna be hardware issue.
Wysłane z Motorola RAZR i.

Related

[Q] unable to get data connection

Hi guys,
I'm being annoyed by my SGS about his data connection. Hope someone could help me!
Few days ago I flashed MIUI Mintberry 2.1.20 and everything was working like a charm, but this morning data connection switch failed several times.
I've tried to wipe everything, re-flash Mintberry and even to flash JVU stock with Odin, but I still can't switch on my data connection.
I can't even see any icon on the status bar.
Any idea? Is my phone broken?
kpaolo said:
Hi guys,
I'm being annoyed by my SGS about his data connection. Hope someone could help me!
Few days ago I flashed MIUI Mintberry 2.1.20 and everything was working like a charm, but this morning data connection switch failed several times.
I've tried to wipe everything, re-flash Mintberry and even to flash JVU stock with Odin, but I still can't switch on my data connection.
I can't even see any icon on the status bar.
Any idea? Is my phone broken?
Click to expand...
Click to collapse
Hmm this is strange, so you turned data on but theres no symbol, right? Have you tried installing another kernel (maybe also applying the Kernel Cleaning Script)?
I' ve tried everything with Odin, and at the moment I have a beautiful black screen of death.
Odin cannot recognize my phone... I'm very frustrated
EDIT: Upgrading Kies'drivers, I managed to connect the phone with Odin again, so I've flashed the lastest official stock firmware to check my antennas. In the worst case, I'll be able to go to the shop for assistance without problems.
Have u tried typin ur apn maually?
Sent from my GT-I9000 using xda premium
Sounds like a settings issue. Never heard of anyone have this problem before - I've flashed every version of mintberry including betas.
I just had this issue
I just had this and figured out what is wrong, its a easy fix too! Just go to settings and wireless and change the access point for your mobile connection. I had 2 access points and just switched it to the other one and my data started working again!
Hope I could help
Hi guys! thank you for all these answers!
I've tried to set APN manually, to change custom ROM and custom kernels and coming back to stock too, but still no data connection icon (neither data connection itself).
At the moment, I'm on JVO, the latest official italian firmware, everything is fine but 3g data connection.
Other ideas? Shall i need of Samsung customer service (I hope no!)?
Solved...
MIUI default settings fault: SMS notification has ran out my money and my provider has blocked 3g connection.
My phone is safe!

[Q] Problem with Slim ICS 3.5

Hi guys,
i have been using Krarvind's Slim ICS 3.5 for about 10 days and I absolutely loved it. I have just updated to 3.6 which caused my phone to bootloop
So, after an hour or so of labouring and trying to work my way back in to it i'm now back on 3.5, but I have absolutely no signal/3G coverage. Wi-Fi works no problems, just no signal!
I went in to the APNs and there is nothing there - I tried to save a new APN and it wont let me - has anyone encountered this before?
Thanks in advance
Haven't experienced this myself but a few things come to mind...
First would be to check if you imei number correct? If not you would need to restore this from a backup.
If IMEI number appears correct then I would try flashing the modem again or a different modem. Modems found here: http://forum.xda-developers.com/showthread.php?t=1158783
If this doesn't work you can try flashing 3.5 base and essentials again.
If that doesn't work search the threads and google or hope someone else can give you an answer. If you don't find any help then as a last resort you can flash a stock rom with Odin although I'm sure there must be an easier way.
wondersteve said:
Hi guys,
i have been using Krarvind's Slim ICS 3.5 for about 10 days and I absolutely loved it. I have just updated to 3.6 which caused my phone to bootloop
So, after an hour or so of labouring and trying to work my way back in to it i'm now back on 3.5, but I have absolutely no signal/3G coverage. Wi-Fi works no problems, just no signal!
I went in to the APNs and there is nothing there - I tried to save a new APN and it wont let me - has anyone encountered this before?
Thanks in advance
Click to expand...
Click to collapse
I've had a similar problem, the updating to 3.6 just went wrong. No bootloop but loads of FC.
My solution has been going back to recovery, do a full wipe (wipe data/restore factory settings) and install 3.6 again. Everything seems to work now but I have to re-install and configure all my apps... :-(
Hope it helps...
Check in About > Phone
Under baseband does it say UNKNOWN ?
this happened to me once, need to reflash the modem. No need for wipes etc

[Q] Droid 3 CM10.1 No service Problems

I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
edhogan1224 said:
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had the exact same problem. I went insane scouring the web for hours trying to find a single person with the same problem until I finally gave up. Does anyone know the last version that actually worked?
I also have this problem, do anyone have any idea how to fix this problem?
edhogan1224 said:
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had similar problems on cm10.1. I have no idea if this will work (I'm outside the US, and my phone asked me to activate the phone), but I also had no service, no data. I changed my network mode from GLOBAL to GSM/WCDMA auto. Now I have service and data (Data after applying the correct carrier apn settings)
I hope this helps you all
P.S. after this step I made factory resets without the need to do the above step again (You only need to put the correct apn settings again if your on networks other than Verizon)

[Q] no LTE/data after flashing ExistenZ

This morning i flashed the larest ExistenZ 3.5 and everything went fine , phone works , can make calls etc... Was on wi-fi so never saw the issue,
Now the LTE/Data does not work , i've tried setting the bell apn , lookimg if I was on lte in settings etc.
Nothing seems to fix the issue, so before going back to an other rom id like to see if someone had this issue and a fix, since i really like the rom and if posible fix it. But if theres no fix ill go back no normal and find an other rom.
Thank you
Xperia Z c6616
I had a similar issue with 3.0 where I could only get a data connection after switching to airplane mode then back. It was really annoying. I'm not sure what fixed it in the end, but I did end up reflashing the baseband, and doing a clean install of 3.5 and now it works fine. Hope his helps.
I know this post is old, but do you have any news regarding to this? I've just flashed eXistenZ v4 and I have the same issue.
I reflashed again (full, fresh stock .228 install) and I got the same problem even before installing eXistenZ, as soon as the flash finished...
Thanks!

[Q] T-Mobile lost signal after factory flash 5.1

Hey Guys,
I have seen multiple threads about 5.1 having an issue with SMS/MMS. My problem is that I do not get a signal at all. I did a full factory flash to Android 5.1 and now i get no connection what so ever. I have tried multiple combinations with toggling Enhanced 4G LTE mode and Preferred network type and nothing makes any difference. If I flash back to SOKP rc1 5.0.2 it works great. I have the latest bootloader and radio. Has anyone experenced this or have any tips?
Thank You,
DFL
Have you tried changing your APN? Try these settings https://support.t-mobile.com/docs/DOC-17581 ... Then delete all other APNs you're not using
@YankInDaSouth yeah, i did do that. after much trial and error i got it working. i ended up re-flashing the radio via fastboot, reset and the data/voice cam in.
thank you for the help,
dfl
Glad you got it all worked out!!
611 works for you?
611 not working for me. On stock rooted ROM.

Categories

Resources