Hi
Do you where I can find stock kernal. I want it in .zip. I want to flash it via recovery.
I didn't know you can flash kernels through recovery !
I only knew via PC...
UltraWelfare said:
I didn't know you can flash kernels through recovery !
I only knew via PC...
Click to expand...
Click to collapse
I don´t think you can flash a firmware at all using CWM.. the file doesn´t have a .ftf extension for nothing
I agree with nanostray.
I think there is no way of flashing a kernel with CWM.
CWM supports .zip files but it can't support .ftf files.
I see. Thank all for correcting me. Could you please give me the download link for stock kernal .ftf
aqua9teen1 said:
I see. Thank all for correcting me. Could you please give me the download link for stock kernal .ftf
Click to expand...
Click to collapse
I think this is the thread you are searching for
UltraWelfare said:
I think this is the thread you are searching for
Click to expand...
Click to collapse
Thank you for the link. Just to make sure, if we flash the stock file via flashtool, the custom rom and the custom kernal will be revert back to original(stock)? I want to know since now I'm using custom ROM and custom kernal. I'm noob since that modification were done by my cousin.
If you want just to revert back to full stock you could also try repairing your phone with SEUS
---------- Post added at 06:56 PM ---------- Previous post was at 06:34 PM ----------
I also found this thread.
It gives all (I am not sure if all) the stock firmwares for Xperia SP.
UltraWelfare said:
If you want just to revert back to full stock you could also try repairing your phone with SEUS
---------- Post added at 06:56 PM ---------- Previous post was at 06:34 PM ----------
I also found this thread.
It gives all (I am not sure if all) the stock firmwares for Xperia SP.
Click to expand...
Click to collapse
Be careful with the offline-charging bug. Kernels on the collection page tend to have this bug. I use the .ftf from a repair with SEUS and my offline charging is working correctly
Related
According to the German android-hilfe.de Website,
http://www.android-hilfe.de/lg-p970-optimus-black-forum/190466-p970-v20n-verfuegbar.html
here it is - 2.3.4 - V20N :
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ADEUTL/V20n_00/V20N_00.kdz
OMG!!!
REALLLLYYYY!!!...thankkksssss!!!!..will test right now!!!...i lovveee YOUUUUUUU!! (btw, just 2 clarify,am not gay!! )
StiflersMom said:
According to the German android-hilfe.de Website,
http://www.android-hilfe.de/lg-p970-optimus-black-forum/190466-p970-v20n-verfuegbar.html
here it is - 2.3.4 - V20N :
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ADEUTL/V20n_00/V20N_00.kdz
Click to expand...
Click to collapse
WOHOOOOOOOOOOO! Only revert to original rom via CMW and then lets go get the UPDATE!!!
Danke Mann! Thanks MAN!
Hey, I just posted my thread, but now v20N released? Great...!!! Waiting for rooted device, then perhaps I'll cook this one...
Thanks for the information...
I got Nova v8, can i flash GB without come back to stock rom?
wt a good news!!!!
eventually....we have the official update! !!!!!
Sent from my LG-P970 using Tapatalk
Great ! Please upload CWM image.
You lazy man! ;-) Flash, root and put here a CWM image ;-)
Very good news.
Still not available by B2C tool but will test the kdz.
Change ur Country to Germany, maybe u can see it there as well Under Germany Open... Not even the support knew bout this
---------- Post added at 05:11 PM ---------- Previous post was at 05:06 PM ----------
If any1 can tell me which kind of rooting might work, i will try it and then make a CWM backup and put it here, since i cant make a flashable zip...
waiting for CWM image
@StiflersMom did you get 2 root it???
N00BY0815 said:
Change ur Country to Germany, maybe u can see it there as well Under Germany Open... Not even the support knew bout this
---------- Post added at 05:11 PM ---------- Previous post was at 05:06 PM ----------
If any1 can tell me which kind of rooting might work, i will try it and then make a CWM backup and put it here, since i cant make a flashable zip...
Click to expand...
Click to collapse
Tried that and it didn't work. "Global" didn't work either.
Maybe because I'm on V10F PORTUGAL, but I'm downloading the KDZ.
No, didn't install the update cause i'm going on vacation tomorrow. Too risky having a buggy phone and no time this evening for installing and configuring 100 apps. Sorry.
Awesome, will check it out.
Installed now i only need to root it... what might be the best way?
DO u think the v10c way might work?
Tell me - why they release 2.3.4 instead of 2.3.5 ? Don't get it. Anyway thank you.
Is it just me or does it look exactly like 2.2.2?...
Oh ur right... Strange thing
It might be smoother ill give it that.. But seriously.. everything looks the same
hi guys
i want to root my xperia tx
cause i updated to J B 9.1.B.1.67 of Hong Kong
I tested the previous method, but did not succeed like in this video https://www.youtube.com/watch?v=7EpkrCq1gfM&list=FLEt_UG7H6K4u6945C-4s8hw&index=2
is there new root for new update ??
i_othman said:
hi guys
i want to root my xperia tx
cause i updated to J B 9.1.B.1.67 of Hong Kong
I tested the previous method, but did not succeed like in this video https://www.youtube.com/watch?v=7EpkrCq1gfM&list=FLEt_UG7H6K4u6945C-4s8hw&index=2
is there new root for new update ??
Click to expand...
Click to collapse
flash old kernel from previous JB kernel
root using Binary method
then flash new kernel without wipe anything
Yenkazu said:
flash old kernel from previous JB kernel
root using Binary method
then flash new kernel without wipe anything
Click to expand...
Click to collapse
does it work?
but i think 67kernel and baseband would cause reboot even u got root permission on 411kenel
Leo said:
does it work?
but i think 67kernel and baseband would cause reboot even u got root permission on 411kenel
Click to expand...
Click to collapse
I dunno it will work IMHO
XD
Some people claim it will works, I read in Chinesse forum
LoL
XD
Try it, and report back
=)
In Chinesse forum, they root using advanced stock kernel with CMW, even they CWM write in Chinesse language, so I'm using Doom kernel
XD
---------- Post added at 06:35 AM ---------- Previous post was at 06:16 AM ----------
Try this, maybe useful
XD
Link 1
http://forum.xda-developers.com/showthread.php?t=2130276
Link 2
http://forum.xda-developers.com/showthread.php?t=2122682
Yenkazu said:
I dunno it will work IMHO
XD
Some people claim it will works, I read in Chinesse forum
LoL
XD
Try it, and report back
=)
In Chinesse forum, they root using advanced stock kernel with CMW, even they CWM write in Chinesse language, so I'm using Doom kernel
XD
---------- Post added at 06:35 AM ---------- Previous post was at 06:16 AM ----------
Try this, maybe useful
XD
Link 1
http://forum.xda-developers.com/showthread.php?t=2130276
Link 2
http://forum.xda-developers.com/showthread.php?t=2122682
Click to expand...
Click to collapse
hahah
u must read that from angeeks bbs right ?
up to now, no way to root except a unlocked BL flashing advanced kernel
im going to try the methods above :thumbup:
if there is no root
please tell me how return to previous version of J B 9.1.B.0.411
i_othman said:
if there is no root
please tell me how return to previous version of J B 9.1.B.0.411
Click to expand...
Click to collapse
Flash a ftf from the all in one thread....
gregbradley said:
Flash a ftf from the all in one thread....
Click to expand...
Click to collapse
give the steps please cauce this is the first time for me
i_othman said:
give the steps please cauce this is the first time for me
Click to expand...
Click to collapse
1) First and only step that is needed is to read post 2 from the all in one thread. Its the very first thread in the Q&A section. Its all explained there.
gregbradley said:
1) First and only step that is needed is to read post 2 from the all in one thread. Its the very first thread in the Q&A section. Its all explained there.
Click to expand...
Click to collapse
thank you so much :good:
i did it
and i will return from the bottom :""(
HELLO WORLD:
plz:angel: may someone help me if there is any way to keep root access when I ll update my xperia z to JB 4.3, I dont want lose my root access
syrianelf said:
HELLO WORLD:
plz:angel: may someone help me if there is any way to keep root access when I ll update my xperia z to JB 4.3, I dont want lose my root access
Click to expand...
Click to collapse
no u cant keep old root just clean install 4.3 then flash Advanced Stock kernel (with recovery) + flash superSU_ fix.zip to root ur device
follow this post http://forum.xda-developers.com/showthread.php?t=2167381
OK thx
mtayabkk said:
no u cant keep old root just clean install 4.3 then flash Advanced Stock kernel (with recovery) + flash superSU_ fix.zip to root ur device
follow this post http://forum.xda-developers.com/showthread.php?t=2167381
Click to expand...
Click to collapse
Ok thx alot u mean that I have to install 4.3 then follow steps in the post after that i have to flash superSU_fix.zip!!!!
ok how I can downlod that "superSU_fix.zip". sorry am Syrian and my english not that good and thx anyway:angel:
syrianelf said:
Ok thx alot u mean that I have to install 4.3 then follow steps in the post after that i have to flash superSU_fix.zip!!!!
ok how I can downlod that "superSU_fix.zip". sorry am Syrian and my english not that good and thx anyway:angel:
Click to expand...
Click to collapse
here you go http://nut.xperia-files.com/?dlid=U3VwZXJTVV9maXg=
---------- Post added at 02:48 PM ---------- Previous post was at 02:46 PM ----------
mtayabkk said:
here you go http://nut.xperia-files.com/?dlid=U3VwZXJTVV9maXg=
Click to expand...
Click to collapse
u must have unlocked bootloader to root for 4.3 other wise u will stuck at bootloop...
Guys I have a doubt ....
should I flash new kernel after restoring backed up rom ...I mean I am on .254 kernel (4.1.2)...I restored existenz that was backed up earlier ....should I flash 4.3 kernel before booting up after restoring process ...
Yes,you must!
MixoMaxoViper said:
Yes,you must!
Click to expand...
Click to collapse
really quick ...thanks a lot
No problem
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
But i have a question for you
What software is better .266 or .254
MixoMaxoViper said:
No problem
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
But i have a question for you
What software is better .266 or .254
Click to expand...
Click to collapse
I always like newer in everything..I mean in technology .may be its bad .....
to be frank .266 is better many new rich features ....ram management is so poor ...hopefully bug fixing update fixes everything
MixoMaxoViper said:
Yes,you must!
Click to expand...
Click to collapse
pchetan2 said:
Guys I have a doubt ....
should I flash new kernel after restoring backed up rom ...I mean I am on .254 kernel (4.1.2)...I restored existenz that was backed up earlier ....should I flash 4.3 kernel before booting up after restoring process ...
Click to expand...
Click to collapse
Actually you don't need to if you have an unlocked bootloader. The kernel is also backed up in the Nand backup.
If you have a locked bootloader, your recovery won't be able to restore the backup so you have to flash it.
Sent from my C5303 using Tapatalk
i was just about to say the same as pec0ra no need to flash
all the Developers,
please help to develop this variant.
please, give some of your time in this model. we (sm-g531f) users badly need custom kernel & rom for our model. where others got many custom kernels, roms, there we dont have ONE things of customized rom or kernel.
plzz, Develop this...
Yes..
aamnahid said:
all the Developers,
please help to develop this variant.
please, give some of your time in this model. we (sm-g531f) users badly need custom kernel & rom for our model. where others got many custom kernels, roms, there we dont have ONE things of customized rom or kernel.
plzz, Develop this...
Click to expand...
Click to collapse
Yes, Everyone Needs it (including me) Selinux and many security in official kernel... many features not work, and some apps run in limited access. more bad things
aamnahid said:
all the Developers,
please help to develop this variant.
please, give some of your time in this model. we (sm-g531f) users badly need custom kernel & rom for our model. where others got many custom kernels, roms, there we dont have ONE things of customized rom or kernel.
plzz, Develop this...
Click to expand...
Click to collapse
TheSMGCraft said:
Yes, Everyone Needs it (including me) Selinux and many security in official kernel... many features not work, and some apps run in limited access. more bad things
Click to expand...
Click to collapse
You can try the kernel made by @doesntexits maybe that works for g531f its for gt31h but i guess it will work but make sureu make a full backup and have oem unlock ticked in developer mode as if this isnt ticked your phone qont boot even if the kernel worksfor your phone and i take no responsibility for any loss try at your own risk
Backup in Recovery?
waleeds1 said:
You can try the kernel made by @doesntexits maybe that works for g531f its for gt31h but i guess it will work but make sureu make a full backup and have oem unlock ticked in developer mode as if this isnt ticked your phone qont boot even if the kernel worksfor your phone and i take no responsibility for any loss try at your own risk
Click to expand...
Click to collapse
Full Backup in TWRP?
TheSMGCraft said:
Full Backup in TWRP?
Click to expand...
Click to collapse
No only backup of system and boot img but if u i repeat check if oem unlock is checked. Btw backup of boot is enough but its better and safer if u have a backup of system too and flash the v2.3 of the kernel as the cpu is overclocked to 1400 mhz
waleeds1 said:
You can try the kernel made by @doesntexits maybe that works for g531f its for gt31h but i guess it will work but make sureu make a full backup and have oem unlock ticked in developer mode as if this isnt ticked your phone qont boot even if the kernel worksfor your phone and i take no responsibility for any loss try at your own risk
Click to expand...
Click to collapse
kernel don't modify look of android?
TheSMGCraft said:
kernel don't modify look of android?
Click to expand...
Click to collapse
Lock of Android? i dont get u
Kernel...
waleeds1 said:
Lock of Android? i dont get u
Click to expand...
Click to collapse
nothing.. http://forum.xda-developers.com/gal...kernel-core2013266073-kernel-samsung-t3410112
this kernel?
Look of android ooh no
---------- Post added at 07:58 PM ---------- Previous post was at 07:56 PM ----------
TheSMGCraft said:
nothing.. http://forum.xda-developers.com/gal...kernel-core2013266073-kernel-samsung-t3410112
this kernel?
Click to expand...
Click to collapse
No not that that is for other phone
so which kernel ?
TheSMGCraft said:
nothing.. http://forum.xda-developers.com/gal...kernel-core2013266073-kernel-samsung-t3410112
this kernel?
Click to expand...
Click to collapse
This kernel http://forum.xda-developers.com/gra...e-kernel-samsung-galaxy-grand-t3443632/page12
---------- Post added at 08:00 PM ---------- Previous post was at 07:59 PM ----------
waleeds1 said:
This kernel http://forum.xda-developers.com/gra...e-kernel-samsung-galaxy-grand-t3443632/page12
Click to expand...
Click to collapse
But still the kernel is made for g531h so try on your own risk and only try if u know how to deal with bootloops
Selinux
waleeds1 said:
This kernel http://forum.xda-developers.com/gra...e-kernel-samsung-galaxy-grand-t3443632/page12
---------- Post added at 08:00 PM ---------- Previous post was at 07:59 PM ----------
But still the kernel is made for g531h so try on your own risk and only try if u know how to deal with bootloops
Click to expand...
Click to collapse
This Kernel Contain Selinux Permissive right?
TheSMGCraft said:
This Kernel Contain Selinux Permissive right?
Click to expand...
Click to collapse
Yes
ok i will flash it
waleeds1 said:
Yes
Click to expand...
Click to collapse
I will flash kernel through TWRP and Backup then upload result here
TheSMGCraft said:
I will flash kernel through TWRP and Backup then upload result here
Click to expand...
Click to collapse
First backup because if anything goes wrong u can restore it and surely tell me the results
Sorry for many questions.
waleeds1 said:
First backup because if anything goes wrong u can restore it and surely tell me the results
Click to expand...
Click to collapse
download 2.3 version of kernel ? or that test kernel?
TheSMGCraft said:
download 2.3 version of kernel ? or that test kernel?
Click to expand...
Click to collapse
Not the test because it isnt official and rven i did not try that
---------- Post added at 08:33 PM ---------- Previous post was at 08:18 PM ----------
TheSMGCraft said:
download 2.3 version of kernel ? or that test kernel?
Click to expand...
Click to collapse
Any news?
---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------
Or did u get a bootloop
waleeds1 said:
Not the test because it isnt official and rven i did not try that
---------- Post added at 08:33 PM ---------- Previous post was at 08:18 PM ----------
Any news?
---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------
Or did u get a bootloop
Click to expand...
Click to collapse
i start flash now ... backup ended a while ago
TheSMGCraft said:
i start flash now ... backup ended a while ago
Click to expand...
Click to collapse
I wish it to work with your phone
Nothing...
TheSMGCraft said:
i start flash now ... backup ended a while ago
Click to expand...
Click to collapse
i booted into recovery and flashed Core_kernel_2.3.zip, it ended fast and successful, phone booted normally and no changes are made