Database Develop

[kernel] [testers required] [sense] Testers required here

Hello guys
myself speed_bot aka Ajay katwe.. i have been working on a kernel for desire c(golfu) from past month or so ..
here is my kernel source.its fully under gplv2 and is based off stock sources from htcdev.com
https://github.com/speedbot/android_kernel_htc_golfu
i will try to implement more features but i need to make an initial release.as i dont have a device i need you guys to help me out...
here's the link
http://www.mediafire.com/?mie2jhax2hsjjjh
report if it boots or not..

speed_bot said:
Hello guys
myself speed_bot aka Ajay katwe.. i have been working on a kernel for desire c(golfu) from past month or so ..
here is my kernel source.its fully under gplv2 and is based off stock sources from htcdev.com
https://github.com/speedbot/android_kernel_htc_golfu
i will try to implement more features but i need to make an initial release.as i dont have a device i need you guys to help me out...
here's the link
http://www.mediafire.com/?mie2jhax2hsjjjh
report if it boots or not..
Click to expand...
Click to collapse
Flashing procedure is same
erase cache and flash boot.img via fastboot

Yes, it boots.

TheRedHunter said:
Yes, it boots.
Click to expand...
Click to collapse
really? can you do this and upload the file here..
cat /proc/last_kmsg
after bootup?

speed_bot said:
really? can you do this and upload the file here..
cat /proc/last_kmsg
after bootup?
Click to expand...
Click to collapse
Of course I'll help you with that, I only need to know how.
---------- Post added at 09:11 PM ---------- Previous post was at 09:09 PM ----------
TheRedHunter said:
Of course I'll help you with that, I only need to know how.
Click to expand...
Click to collapse
Wait, that should be somewhere in my system folder, yes?

TheRedHunter said:
Of course I'll help you with that, I only need to know how.
---------- Post added at 09:11 PM ---------- Previous post was at 09:09 PM ----------
Wait, that should be somewhere in my system folder, yes?
Click to expand...
Click to collapse
check this post for all methods of getting logs
http://forum.xda-developers.com/showpost.php?p=40638589&postcount=4

need a quick answer

Guys I have a doubt ....
should I flash new kernel after restoring backed up rom ...I mean I am on .254 kernel (4.1.2)...I restored existenz that was backed up earlier ....should I flash 4.3 kernel before booting up after restoring process ...

Yes,you must!

MixoMaxoViper said:
Yes,you must!
Click to expand...
Click to collapse
really quick ...thanks a lot

No problem
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
But i have a question for you
What software is better .266 or .254

MixoMaxoViper said:
No problem
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
But i have a question for you
What software is better .266 or .254
Click to expand...
Click to collapse
I always like newer in everything..I mean in technology .may be its bad .....
to be frank .266 is better many new rich features ....ram management is so poor ...hopefully bug fixing update fixes everything

MixoMaxoViper said:
Yes,you must!
Click to expand...
Click to collapse
pchetan2 said:
Guys I have a doubt ....
should I flash new kernel after restoring backed up rom ...I mean I am on .254 kernel (4.1.2)...I restored existenz that was backed up earlier ....should I flash 4.3 kernel before booting up after restoring process ...
Click to expand...
Click to collapse
Actually you don't need to if you have an unlocked bootloader. The kernel is also backed up in the Nand backup.
If you have a locked bootloader, your recovery won't be able to restore the backup so you have to flash it.
Sent from my C5303 using Tapatalk

i was just about to say the same as pec0ra no need to flash

D955: TWRP v2.8.5.0 beta

Hello all
Here is attached latest version of twrp recovery for gflex.
As I have an d955 hardware with 4.4.2 rooted, this work great on it.
Please DON'T use it if You don't know what this is and if You don't know how to unbrick recovery partition.
Thx to twrp guys for this great stuff.
Untar
adb push recovery.img /sdcard/recovery.img
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
adb reboot recovery
Have a fun.

Has the .img been "bumped" or is this ready to flash. Reason I ask is I can add a meta-inf folder with updater-script so we can flash to update to the latest twrp

Hello. It is alredy bumped

fergy said:
Hello. It is alredy bumped
Click to expand...
Click to collapse
Hey ferg, i see you are an ex kernel builder.... any chance of you building a kernel for the cm that playfulgod has abandoned?

podagee said:
Hey ferg, i see you are an ex kernel builder.... any chance of you building a kernel for the cm that playfulgod has abandoned?
Click to expand...
Click to collapse
Ya, sure... Is there any specific version of kernel what You are mentioned? Gotta link?

fergy said:
Ya, sure... Is there any specific version of kernel what You are mentioned? Gotta link?
Click to expand...
Click to collapse
Its in the developement section. Just a kernel that has sound cause we were facing no sound no calling,etc.

podagee said:
Its in the developement section. Just a kernel that has sound cause we were facing no sound no calling,etc.
Click to expand...
Click to collapse
Please link Me that.
Thank You

fergy said:
Please link Me that.
Thank You
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2780892

podagee said:
http://forum.xda-developers.com/showthread.php?t=2780892
Click to expand...
Click to collapse
Which defconfig is used for building kernel, d955 or z-xxx-perf?

fergy said:
Which defconfig is used for building kernel, d955 or z-xxx-perf?
Click to expand...
Click to collapse
Not too sure but i have a d950
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
fergy said:
Which defconfig is used for building kernel, d955 or z-xxx-perf?
Click to expand...
Click to collapse
Dont know what playfulgod used as his base kernel.....

podagee said:
Not too sure but i have a d950
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
Dont know what playfulgod used as his base kernel.....
Click to expand...
Click to collapse
Ok, let's then ask Him.

fergy said:
Ok, let's then ask Him.
Click to expand...
Click to collapse
Unless.you have a rom.to share?

podagee said:
Unless.you have a rom.to share?
Click to expand...
Click to collapse
Regarding configuration, probably this is used (until PlayfulGod response):
Code:
TARGET_KERNEL_CONFIG := d959_defconfig
EDIT: Anyway, I don't know why He use 959 configuration for 950
Regarding rom, You have PM.

I think we are now the last/only 3 peep left in the FLEX ZONE. Lmao. Figures

mattwheat said:
I think we are now the last/only 3 peep left in the FLEX ZONE. Lmao. Figures
Click to expand...
Click to collapse
Nope.
Patience is a virtue
Sent from my LG-D959 using XDA Free mobile app

4

I am just a bystander in all of what's been happening....but I want to just say thanks for working on what it is that you guys are doing. :thumbup::beer:
Sent from my LG-D950 using XDA Free mobile app

@fergy...im pledging $20 if you can please make a working kernel to fix our issues w the CM rom. Thanks in advance for any and all that u and the rest of the devs that have taken the time to work on this!
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
I hope other flex owners will be kind enough to pledge some funds as well!

jasonmastertech said:
@fergy...im pledging $20 if you can please make a working kernel to fix our issues w the CM rom. Thanks in advance for any and all that u and the rest of the devs that have taken the time to work on this!
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
I hope other flex owners will be kind enough to pledge some funds as well!
Click to expand...
Click to collapse
What are issues with CM kernel You use?

So, here is some fixes in this kernel for CM11 (don't use it with stock image because display will be black due to changed mdp structure), so please be free to test and let Me know what work and what not work.
boot.img
Note: flash with Flashify. It is already bumped.

[KERNEL] Galaxy A9 SM-A9100

This is a permissive kernel for the Samsung Galaxy A9pro SM-A9100 Qualcomm MSM8976.
This is up for testing, hopefully to get some development going.
It may boot it may not.
Please take note of what happens and give details.
This boot image has DM-Verity and encryption removed so this requires your device is not using encryption.
Disclaimer: Flashing this will trip your knox counter and possibly void your warranty.
Install:
Make a backup of your current boot partition with TWRP in case you need to restore.
Flash the file below with ODIN in the AP slot or extract the boot.img and flash with TWRP.
A9100_permissive_boot_130816
.

I flashed the above A9100_permissive_boot_130816.tar but it get stuck in bootlogo. So I flashed your A9100ZCU1APF1_no_encryptable_boot.tar and it boots fine again. But this is with stock rom.
I saved the last_kmsg.txt from this new kernel. But It's to big for pastebin...

This is highly annoying. Could you upload the log somewhere such as Tinyupload.com?

http://s000.tinyupload.com/index.php?file_id=80470715515642760697
I hope you can unlock this samsung mess. Thanks!

If anyone can get this going, the OP is the person to do it. He worked wonders on the Tab S2!! I would have this phone if it had actual US Lte bands. This is what the Note7 should have been.

We had an issue like this with the lollipop kernel source for the Tab A.
Even though it compiled no issues it just would not boot.
Well I say that I actually did find a way but it wasn't satisfactory.
Samsung would not admit to an issue with the source code. However when MM was released the source code was fixed.
Might be a similar case here and I'm sure this device will be getting MM.

I understand, that's all stopped?

Can I ask what compression method you used please

ballerd said:
Can I ask what compression method you used please
Click to expand...
Click to collapse
Compression method for the kernel or boot image?

ashyx said:
Compression method for the kernel or boot image?
Click to expand...
Click to collapse
Both if possible would you mind having a look at my second attempt at kernel for a310F 2016 hear is link if you don't mind https://drive.google.com/file/d/0B2XSl4S2GfBMM1Q4aVJtRElMSHc/view?usp=docslist_api and if you could give me any pointers don't expect to be spoon fed I really appricate what work you do ever since I started to learn and I aspire to be a developer and I think its amazing what you do
---------- Post added at 06:48 PM ---------- Previous post was at 06:40 PM ----------
ballerd said:
Both if possible would you mind having a look at my second attempt at kernel for a310F 2016 hear is link if you don't mind https://drive.google.com/file/d/0B2XSl4S2GfBMM1Q4aVJtRElMSHc/view?usp=docslist_api and if you could give me any pointers don't expect to be spoon fed I really appricate what work you do ever since I started to learn and I aspire to be a developer and I think its amazing what you do
Click to expand...
Click to collapse
Plus I doing all work no PC just using phone digital ocean server and vncserver its a ***** having to use pbkne keyboard ha

ballerd said:
Both if possible would you mind having a look at my second attempt at kernel for a310F 2016 hear is link if you don't mind https://drive.google.com/file/d/0B2XSl4S2GfBMM1Q4aVJtRElMSHc/view?usp=docslist_api and if you could give me any pointers don't expect to be spoon fed I really appricate what work you do ever since I started to learn and I aspire to be a developer and I think its amazing what you do
---------- Post added at 06:48 PM ---------- Previous post was at 06:40 PM ----------
Plus I doing all work no PC just using phone digital ocean server and vncserver its a ***** having to use pbkne keyboard ha
Click to expand...
Click to collapse
What's the issue with your boot.img? I can't really test it because I don't have the a310f.

U don't no haven't flashed coz no pc I would like you to look at contents to see if it looks OK

ballerd said:
U don't no haven't flashed coz no pc I would like you to look at contents to see if it looks OK
Click to expand...
Click to collapse
Honestly I wouldnt be able to tell anything by looking at it.
Just flash it with twrp and see.

help me, please
Hi bro,
my a7 phone is from china model a7100 (link rom: http://www.sammobile.com/firmwares/database/SM-A7100/) using chip qualcom 8939, so can i flash other rom (http://www.sammobile.com/firmwares/download/86847/A710FXXU1BPH1_A710FDODD1BPG1_INS/) for it? I haven't flashed any rom for it because i am afraid it will be brick when i flash rom outside china region. Can i flash it? Sorry because my English not well.
Thanks.

thnam35 said:
Hi bro,
my a7 phone is from china model a7100 (link rom: http://www.sammobile.com/firmwares/database/SM-A7100/) using chip qualcom 8939, so can i flash other rom (http://www.sammobile.com/firmwares/download/86847/A710FXXU1BPH1_A710FDODD1BPG1_INS/) for it? I haven't flashed any rom for it because i am afraid it will be brick when i flash rom outside china region. Can i flash it? Sorry because my English not well.
Thanks.
Click to expand...
Click to collapse
I doubt odin will allow it to flash.

ashyx said:
I doubt odin will allow it to flash.
Click to expand...
Click to collapse
hi bro
can it be brick when i flash russia's rom? my phone is from china (SM-A7100)

ashyx said:
This is a permissive kernel for the Samsung Galaxy A9pro SM-A9100 Qualcomm MSM8939.
This is up for testing, hopefully to get some development going.
It may boot it may not.
Please take note of what happens and give details.
This boot image has DM-Verity and encryption removed so this requires your device is not using encryption.
Disclaimer: Flashing this will trip your knox counter and possibly void your warranty.
Install:
Make a backup of your current boot partition with TWRP in case you need to restore.
Flash the file below with ODIN in the AP slot or extract the boot.img and flash with TWRP.
A9100_permissive_boot_130816
.
Click to expand...
Click to collapse
It does not work on a9100
---------- Post added at 11:52 ---------- Previous post was at 11:51 ----------
Why do this? Here to discuss anything other than a9100

dadimon29 said:
It does not work on a9100
Click to expand...
Click to collapse
We're working on it.

ashyx said:
We're working on it.
Click to expand...
Click to collapse
It may need help in testing? to speed up the process?
---------- Post added at 12:28 ---------- Previous post was at 12:15 ----------
ashyx said:
This is a permissive kernel for the Samsung Galaxy A9pro SM-A9100 Qualcomm MSM8939.
Click to expand...
Click to collapse
Here error processor MSM8976

dadimon29 said:
It may need help in testing? to speed up the process?
---------- Post added at 12:28 ---------- Previous post was at 12:15 ----------
Here error processor MSM8976
Click to expand...
Click to collapse
Don't worry about it, it's just a typo. Corrected.

Honor 3C Baseband Unknown

Hi, How to fix or solve Honor 3C Baseband Unknown?? plz help me....

Nouman_Khan said:
Hi, How to fix or solve Honor 3C Baseband Unknown?? plz help me....
Click to expand...
Click to collapse
Though i am not pro but the little knowledge i have look like you flash the wrong Area ROM please get the exact Phone type by getting your phone in download mode

dinokhan said:
Though i am not pro but the little knowledge i have look like you flash the wrong Area ROM please get the exact Phone type by getting your phone in download mode
Click to expand...
Click to collapse
Thanx for ans. i already checked all stock roms & custom roms but problem is still there and also tried modem fix zip flashed but no result.problem is came after flashing the TWRP-3.0.0.0. If have any other way like a write file in system to solve this prob?? plz reply if anyone know

Nouman_Khan said:
Thanx for ans. i already checked all stock roms & custom roms but problem is still there and also tried modem fix zip flashed but no result.problem is came after flashing the TWRP-3.0.0.0. If have any other way like a write file in system to solve this prob?? plz reply if anyone know
Click to expand...
Click to collapse
That post might help
https://forum.xda-developers.com/android/development/huawei-honor-3c-imei-fix-t3288020

dinokhan said:
That post might help
https://forum.xda-developers.com/android/development/huawei-honor-3c-imei-fix-t3288020
Click to expand...
Click to collapse
Thanx Bro I will try this

Baseband issue can be fixed by flashing stock rom , plz try

Probably wiping data Nd flashing modem.img will fix this

Nouman_Khan said:
Thanx Bro I will try this
Click to expand...
Click to collapse
Can i know which chipset does honor 3c use ?

do you have twrp backup of stock rom?
---------- Post added at 06:02 PM ---------- Previous post was at 06:01 PM ----------
if you do just delete nvram folder and got to recovery and restore nvram and oem info partition
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
and report back