Hello all
Here is attached latest version of twrp recovery for gflex.
As I have an d955 hardware with 4.4.2 rooted, this work great on it.
Please DON'T use it if You don't know what this is and if You don't know how to unbrick recovery partition.
Thx to twrp guys for this great stuff.
Untar
adb push recovery.img /sdcard/recovery.img
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
adb reboot recovery
Have a fun.
Has the .img been "bumped" or is this ready to flash. Reason I ask is I can add a meta-inf folder with updater-script so we can flash to update to the latest twrp
Hello. It is alredy bumped
fergy said:
Hello. It is alredy bumped
Click to expand...
Click to collapse
Hey ferg, i see you are an ex kernel builder.... any chance of you building a kernel for the cm that playfulgod has abandoned?
podagee said:
Hey ferg, i see you are an ex kernel builder.... any chance of you building a kernel for the cm that playfulgod has abandoned?
Click to expand...
Click to collapse
Ya, sure... Is there any specific version of kernel what You are mentioned? Gotta link?
fergy said:
Ya, sure... Is there any specific version of kernel what You are mentioned? Gotta link?
Click to expand...
Click to collapse
Its in the developement section. Just a kernel that has sound cause we were facing no sound no calling,etc.
podagee said:
Its in the developement section. Just a kernel that has sound cause we were facing no sound no calling,etc.
Click to expand...
Click to collapse
Please link Me that.
Thank You
fergy said:
Please link Me that.
Thank You
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2780892
podagee said:
http://forum.xda-developers.com/showthread.php?t=2780892
Click to expand...
Click to collapse
Which defconfig is used for building kernel, d955 or z-xxx-perf?
fergy said:
Which defconfig is used for building kernel, d955 or z-xxx-perf?
Click to expand...
Click to collapse
Not too sure but i have a d950
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
fergy said:
Which defconfig is used for building kernel, d955 or z-xxx-perf?
Click to expand...
Click to collapse
Dont know what playfulgod used as his base kernel.....
podagee said:
Not too sure but i have a d950
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
Dont know what playfulgod used as his base kernel.....
Click to expand...
Click to collapse
Ok, let's then ask Him.
fergy said:
Ok, let's then ask Him.
Click to expand...
Click to collapse
Unless.you have a rom.to share?
podagee said:
Unless.you have a rom.to share?
Click to expand...
Click to collapse
Regarding configuration, probably this is used (until PlayfulGod response):
Code:
TARGET_KERNEL_CONFIG := d959_defconfig
EDIT: Anyway, I don't know why He use 959 configuration for 950
Regarding rom, You have PM.
I think we are now the last/only 3 peep left in the FLEX ZONE. Lmao. Figures
mattwheat said:
I think we are now the last/only 3 peep left in the FLEX ZONE. Lmao. Figures
Click to expand...
Click to collapse
Nope.
Patience is a virtue
Sent from my LG-D959 using XDA Free mobile app
4
I am just a bystander in all of what's been happening....but I want to just say thanks for working on what it is that you guys are doing. :thumbup::beer:
Sent from my LG-D950 using XDA Free mobile app
@fergy...im pledging $20 if you can please make a working kernel to fix our issues w the CM rom. Thanks in advance for any and all that u and the rest of the devs that have taken the time to work on this!
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
I hope other flex owners will be kind enough to pledge some funds as well!
jasonmastertech said:
@fergy...im pledging $20 if you can please make a working kernel to fix our issues w the CM rom. Thanks in advance for any and all that u and the rest of the devs that have taken the time to work on this!
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
I hope other flex owners will be kind enough to pledge some funds as well!
Click to expand...
Click to collapse
What are issues with CM kernel You use?
So, here is some fixes in this kernel for CM11 (don't use it with stock image because display will be black due to changed mdp structure), so please be free to test and let Me know what work and what not work.
boot.img
Note: flash with Flashify. It is already bumped.
Related
Hello update is finally here:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP990/AITADW/V20l_00/V20L_00.kdz
so is this for europe?? anybody try?
Big news! Could you tell me which country the rom comes from?
Mine is from Italy =)
wow~~ you're quick! just want to do the same things! hope some pro can make a custom rom out of this!
ray8898 said:
wow~~ you're quick! just want to do the same things! hope some pro can make a custom rom out of this!
Click to expand...
Click to collapse
i'm sure that Topogigi and Paul will give us something in a couple of day =)
thx for this update
Is there a guide somewhere to flash KDZ files?
Does it come with a new baseband? If so I'll flash this and "extract" the .fls files.
ryaneu said:
Is there a guide somewhere to flash KDZ files?
Click to expand...
Click to collapse
There you go mate:
http://forum.xda-developers.com/showthread.php?t=1287236
Is there a guide somewhere to flash KDZ files?
Click to expand...
Click to collapse
Code:
http://forum.xda-developers.com/showthread.php?t=1264289
remczar69 said:
There you go mate:
http://forum.xda-developers.com/showthread.php?t=1287236
Click to expand...
Click to collapse
Thanks!
btw anyone successfully flashed this yet? please show some screen shots. thanks.
Too bad both files are on filesonic, so I need to wait 15 minutes to download the second file
After it's done, I'll let you know if it worked.
updated but SuperOneCòick dont work
I wrote this guide in p920 secton.
I tested it on Optimus 3d
Please confirm if it's working on p990.
KeePeeR26 said:
updated but SuperOneCòick dont work
Click to expand...
Click to collapse
NVFlash CWM. Then you can install the su stuff.
remczar69 said:
Too bad both files are on filesonic, so I need to wait 15 minutes to download the second file
After it's done, I'll let you know if it worked.
Click to expand...
Click to collapse
You need only first file with flasher
Drivers are not neccesary if u have installed it.
It's sad to hear that no new baseband and kernel.
Here is a new post for rooting GB:
http://forum.xda-developers.com/showthread.php?p=18946498#post18946498
Thx to TrymHansen
---------- Post added at 09:45 AM ---------- Previous post was at 09:44 AM ----------
@rexren you are right.
Craxx said:
Here is a new post for rooting GB:
http://forum.xda-developers.com/showthread.php?p=18946498#post18946498
Thx to TrymHansen
---------- Post added at 09:45 AM ---------- Previous post was at 09:44 AM ----------
@rexren you are right.
Click to expand...
Click to collapse
Hi Craxx,
any noticeable improvements or changes in v20L?
Hello guys
myself speed_bot aka Ajay katwe.. i have been working on a kernel for desire c(golfu) from past month or so ..
here is my kernel source.its fully under gplv2 and is based off stock sources from htcdev.com
https://github.com/speedbot/android_kernel_htc_golfu
i will try to implement more features but i need to make an initial release.as i dont have a device i need you guys to help me out...
here's the link
http://www.mediafire.com/?mie2jhax2hsjjjh
report if it boots or not..
speed_bot said:
Hello guys
myself speed_bot aka Ajay katwe.. i have been working on a kernel for desire c(golfu) from past month or so ..
here is my kernel source.its fully under gplv2 and is based off stock sources from htcdev.com
https://github.com/speedbot/android_kernel_htc_golfu
i will try to implement more features but i need to make an initial release.as i dont have a device i need you guys to help me out...
here's the link
http://www.mediafire.com/?mie2jhax2hsjjjh
report if it boots or not..
Click to expand...
Click to collapse
Flashing procedure is same
erase cache and flash boot.img via fastboot
Yes, it boots.
TheRedHunter said:
Yes, it boots.
Click to expand...
Click to collapse
really? can you do this and upload the file here..
cat /proc/last_kmsg
after bootup?
speed_bot said:
really? can you do this and upload the file here..
cat /proc/last_kmsg
after bootup?
Click to expand...
Click to collapse
Of course I'll help you with that, I only need to know how.
---------- Post added at 09:11 PM ---------- Previous post was at 09:09 PM ----------
TheRedHunter said:
Of course I'll help you with that, I only need to know how.
Click to expand...
Click to collapse
Wait, that should be somewhere in my system folder, yes?
TheRedHunter said:
Of course I'll help you with that, I only need to know how.
---------- Post added at 09:11 PM ---------- Previous post was at 09:09 PM ----------
Wait, that should be somewhere in my system folder, yes?
Click to expand...
Click to collapse
check this post for all methods of getting logs
http://forum.xda-developers.com/showpost.php?p=40638589&postcount=4
I tried many versions including xposed-v78-sdk21-arm64.zip on stock rom but always bootloop occurs, any idea?
mysarasaid said:
I tried many versions including xposed-v78-sdk21-arm64.zip on stock rom but always bootloop occurs, any idea?
Click to expand...
Click to collapse
so did i........never got boot loop......i tried it on S142 & S152..........currently using xposed-v79-sdk-arm64.zip......
its better than v78........consumes less battery
bladehunter said:
so did i........never got boot loop......i tried it on S142 & S152..........currently using xposed-v79-sdk-arm64.zip......
its better than v78........consumes less battery
Click to expand...
Click to collapse
Thanks, worked
mysarasaid said:
Thanks, worked
Click to expand...
Click to collapse
is that means working on the 153 ?
habibimroncn said:
is that means working on the 153 ?
Click to expand...
Click to collapse
Yea.....but the latest one is also better......
bladehunter said:
Yea.....but the latest one is also better......
Click to expand...
Click to collapse
I've tried the latest version and it works well. Thank's :good:
Help me. installed xposed v80 arm 64 zip through twrp recovery. when i reboot the system it is stuck at lenevo logo..
Android version 5.0.. Flashed supersu first and then trying to flash xposed got stuck at lenevo logo... Any one can help me???
bladehunter said:
so did i........never got boot loop......i tried it on S142 & S152..........currently using xposed-v79-sdk-arm64.zip......
its better than v78........consumes less battery
Click to expand...
Click to collapse
Thanks It Works To ME
bladehunter said:
Yea.....but the latest one is also better......
Click to expand...
Click to collapse
Hey brother, I need some help for my phone Lenovo a7000 regarding xposed installer. Can you help me please? My contact no is 9821109861, pls whatsapp me asap. Ty
---------- Post added at 08:48 PM ---------- Previous post was at 08:44 PM ----------
bladehunter said:
so did i........never got boot loop......i tried it on S142 & S152..........currently using xposed-v79-sdk-arm64.zip......
its better than v78........consumes less battery
Click to expand...
Click to collapse
Hey brother, I need some help for my phone Lenovo a7000 regarding xposed installer. Can you help me please? My contact no is 9821109861, pls whatsapp me asap. Ty
Does this also works on custom roms???
yea it works on custom roms as well....
---------- Post added at 07:01 PM ---------- Previous post was at 07:00 PM ----------
hdjrocks said:
Hey brother, I need some help for my phone Lenovo a7000 regarding xposed installer. Can you help me please? My contact no is 9821109861, pls whatsapp me asap. Ty
---------- Post added at 08:48 PM ---------- Previous post was at 08:44 PM ----------
Hey brother, I need some help for my phone Lenovo a7000 regarding xposed installer. Can you help me please? My contact no is 9821109861, pls whatsapp me asap. Ty
Click to expand...
Click to collapse
bro whats the problem if its how to flash xposed then plez google it there are lots of guides..........
even for noobs like me.....
but in simple terms u first have to flash a custom boot.img along with your recovery......
then u have to root your phone.....
and then flash xposed........via custom recovery......
This is a permissive kernel for the Samsung Galaxy A9pro SM-A9100 Qualcomm MSM8976.
This is up for testing, hopefully to get some development going.
It may boot it may not.
Please take note of what happens and give details.
This boot image has DM-Verity and encryption removed so this requires your device is not using encryption.
Disclaimer: Flashing this will trip your knox counter and possibly void your warranty.
Install:
Make a backup of your current boot partition with TWRP in case you need to restore.
Flash the file below with ODIN in the AP slot or extract the boot.img and flash with TWRP.
A9100_permissive_boot_130816
.
I flashed the above A9100_permissive_boot_130816.tar but it get stuck in bootlogo. So I flashed your A9100ZCU1APF1_no_encryptable_boot.tar and it boots fine again. But this is with stock rom.
I saved the last_kmsg.txt from this new kernel. But It's to big for pastebin...
This is highly annoying. Could you upload the log somewhere such as Tinyupload.com?
http://s000.tinyupload.com/index.php?file_id=80470715515642760697
I hope you can unlock this samsung mess. Thanks!
If anyone can get this going, the OP is the person to do it. He worked wonders on the Tab S2!! I would have this phone if it had actual US Lte bands. This is what the Note7 should have been.
We had an issue like this with the lollipop kernel source for the Tab A.
Even though it compiled no issues it just would not boot.
Well I say that I actually did find a way but it wasn't satisfactory.
Samsung would not admit to an issue with the source code. However when MM was released the source code was fixed.
Might be a similar case here and I'm sure this device will be getting MM.
I understand, that's all stopped?
Can I ask what compression method you used please
ballerd said:
Can I ask what compression method you used please
Click to expand...
Click to collapse
Compression method for the kernel or boot image?
ashyx said:
Compression method for the kernel or boot image?
Click to expand...
Click to collapse
Both if possible would you mind having a look at my second attempt at kernel for a310F 2016 hear is link if you don't mind https://drive.google.com/file/d/0B2XSl4S2GfBMM1Q4aVJtRElMSHc/view?usp=docslist_api and if you could give me any pointers don't expect to be spoon fed I really appricate what work you do ever since I started to learn and I aspire to be a developer and I think its amazing what you do
---------- Post added at 06:48 PM ---------- Previous post was at 06:40 PM ----------
ballerd said:
Both if possible would you mind having a look at my second attempt at kernel for a310F 2016 hear is link if you don't mind https://drive.google.com/file/d/0B2XSl4S2GfBMM1Q4aVJtRElMSHc/view?usp=docslist_api and if you could give me any pointers don't expect to be spoon fed I really appricate what work you do ever since I started to learn and I aspire to be a developer and I think its amazing what you do
Click to expand...
Click to collapse
Plus I doing all work no PC just using phone digital ocean server and vncserver its a ***** having to use pbkne keyboard ha
ballerd said:
Both if possible would you mind having a look at my second attempt at kernel for a310F 2016 hear is link if you don't mind https://drive.google.com/file/d/0B2XSl4S2GfBMM1Q4aVJtRElMSHc/view?usp=docslist_api and if you could give me any pointers don't expect to be spoon fed I really appricate what work you do ever since I started to learn and I aspire to be a developer and I think its amazing what you do
---------- Post added at 06:48 PM ---------- Previous post was at 06:40 PM ----------
Plus I doing all work no PC just using phone digital ocean server and vncserver its a ***** having to use pbkne keyboard ha
Click to expand...
Click to collapse
What's the issue with your boot.img? I can't really test it because I don't have the a310f.
U don't no haven't flashed coz no pc I would like you to look at contents to see if it looks OK
ballerd said:
U don't no haven't flashed coz no pc I would like you to look at contents to see if it looks OK
Click to expand...
Click to collapse
Honestly I wouldnt be able to tell anything by looking at it.
Just flash it with twrp and see.
help me, please
Hi bro,
my a7 phone is from china model a7100 (link rom: http://www.sammobile.com/firmwares/database/SM-A7100/) using chip qualcom 8939, so can i flash other rom (http://www.sammobile.com/firmwares/download/86847/A710FXXU1BPH1_A710FDODD1BPG1_INS/) for it? I haven't flashed any rom for it because i am afraid it will be brick when i flash rom outside china region. Can i flash it? Sorry because my English not well.
Thanks.
thnam35 said:
Hi bro,
my a7 phone is from china model a7100 (link rom: http://www.sammobile.com/firmwares/database/SM-A7100/) using chip qualcom 8939, so can i flash other rom (http://www.sammobile.com/firmwares/download/86847/A710FXXU1BPH1_A710FDODD1BPG1_INS/) for it? I haven't flashed any rom for it because i am afraid it will be brick when i flash rom outside china region. Can i flash it? Sorry because my English not well.
Thanks.
Click to expand...
Click to collapse
I doubt odin will allow it to flash.
ashyx said:
I doubt odin will allow it to flash.
Click to expand...
Click to collapse
hi bro
can it be brick when i flash russia's rom? my phone is from china (SM-A7100)
ashyx said:
This is a permissive kernel for the Samsung Galaxy A9pro SM-A9100 Qualcomm MSM8939.
This is up for testing, hopefully to get some development going.
It may boot it may not.
Please take note of what happens and give details.
This boot image has DM-Verity and encryption removed so this requires your device is not using encryption.
Disclaimer: Flashing this will trip your knox counter and possibly void your warranty.
Install:
Make a backup of your current boot partition with TWRP in case you need to restore.
Flash the file below with ODIN in the AP slot or extract the boot.img and flash with TWRP.
A9100_permissive_boot_130816
.
Click to expand...
Click to collapse
It does not work on a9100
---------- Post added at 11:52 ---------- Previous post was at 11:51 ----------
Why do this? Here to discuss anything other than a9100
dadimon29 said:
It does not work on a9100
Click to expand...
Click to collapse
We're working on it.
ashyx said:
We're working on it.
Click to expand...
Click to collapse
It may need help in testing? to speed up the process?
---------- Post added at 12:28 ---------- Previous post was at 12:15 ----------
ashyx said:
This is a permissive kernel for the Samsung Galaxy A9pro SM-A9100 Qualcomm MSM8939.
Click to expand...
Click to collapse
Here error processor MSM8976
dadimon29 said:
It may need help in testing? to speed up the process?
---------- Post added at 12:28 ---------- Previous post was at 12:15 ----------
Here error processor MSM8976
Click to expand...
Click to collapse
Don't worry about it, it's just a typo. Corrected.
all the Developers,
please help to develop this variant.
please, give some of your time in this model. we (sm-g531f) users badly need custom kernel & rom for our model. where others got many custom kernels, roms, there we dont have ONE things of customized rom or kernel.
plzz, Develop this...
Yes..
aamnahid said:
all the Developers,
please help to develop this variant.
please, give some of your time in this model. we (sm-g531f) users badly need custom kernel & rom for our model. where others got many custom kernels, roms, there we dont have ONE things of customized rom or kernel.
plzz, Develop this...
Click to expand...
Click to collapse
Yes, Everyone Needs it (including me) Selinux and many security in official kernel... many features not work, and some apps run in limited access. more bad things
aamnahid said:
all the Developers,
please help to develop this variant.
please, give some of your time in this model. we (sm-g531f) users badly need custom kernel & rom for our model. where others got many custom kernels, roms, there we dont have ONE things of customized rom or kernel.
plzz, Develop this...
Click to expand...
Click to collapse
TheSMGCraft said:
Yes, Everyone Needs it (including me) Selinux and many security in official kernel... many features not work, and some apps run in limited access. more bad things
Click to expand...
Click to collapse
You can try the kernel made by @doesntexits maybe that works for g531f its for gt31h but i guess it will work but make sureu make a full backup and have oem unlock ticked in developer mode as if this isnt ticked your phone qont boot even if the kernel worksfor your phone and i take no responsibility for any loss try at your own risk
Backup in Recovery?
waleeds1 said:
You can try the kernel made by @doesntexits maybe that works for g531f its for gt31h but i guess it will work but make sureu make a full backup and have oem unlock ticked in developer mode as if this isnt ticked your phone qont boot even if the kernel worksfor your phone and i take no responsibility for any loss try at your own risk
Click to expand...
Click to collapse
Full Backup in TWRP?
TheSMGCraft said:
Full Backup in TWRP?
Click to expand...
Click to collapse
No only backup of system and boot img but if u i repeat check if oem unlock is checked. Btw backup of boot is enough but its better and safer if u have a backup of system too and flash the v2.3 of the kernel as the cpu is overclocked to 1400 mhz
waleeds1 said:
You can try the kernel made by @doesntexits maybe that works for g531f its for gt31h but i guess it will work but make sureu make a full backup and have oem unlock ticked in developer mode as if this isnt ticked your phone qont boot even if the kernel worksfor your phone and i take no responsibility for any loss try at your own risk
Click to expand...
Click to collapse
kernel don't modify look of android?
TheSMGCraft said:
kernel don't modify look of android?
Click to expand...
Click to collapse
Lock of Android? i dont get u
Kernel...
waleeds1 said:
Lock of Android? i dont get u
Click to expand...
Click to collapse
nothing.. http://forum.xda-developers.com/gal...kernel-core2013266073-kernel-samsung-t3410112
this kernel?
Look of android ooh no
---------- Post added at 07:58 PM ---------- Previous post was at 07:56 PM ----------
TheSMGCraft said:
nothing.. http://forum.xda-developers.com/gal...kernel-core2013266073-kernel-samsung-t3410112
this kernel?
Click to expand...
Click to collapse
No not that that is for other phone
so which kernel ?
TheSMGCraft said:
nothing.. http://forum.xda-developers.com/gal...kernel-core2013266073-kernel-samsung-t3410112
this kernel?
Click to expand...
Click to collapse
This kernel http://forum.xda-developers.com/gra...e-kernel-samsung-galaxy-grand-t3443632/page12
---------- Post added at 08:00 PM ---------- Previous post was at 07:59 PM ----------
waleeds1 said:
This kernel http://forum.xda-developers.com/gra...e-kernel-samsung-galaxy-grand-t3443632/page12
Click to expand...
Click to collapse
But still the kernel is made for g531h so try on your own risk and only try if u know how to deal with bootloops
Selinux
waleeds1 said:
This kernel http://forum.xda-developers.com/gra...e-kernel-samsung-galaxy-grand-t3443632/page12
---------- Post added at 08:00 PM ---------- Previous post was at 07:59 PM ----------
But still the kernel is made for g531h so try on your own risk and only try if u know how to deal with bootloops
Click to expand...
Click to collapse
This Kernel Contain Selinux Permissive right?
TheSMGCraft said:
This Kernel Contain Selinux Permissive right?
Click to expand...
Click to collapse
Yes
ok i will flash it
waleeds1 said:
Yes
Click to expand...
Click to collapse
I will flash kernel through TWRP and Backup then upload result here
TheSMGCraft said:
I will flash kernel through TWRP and Backup then upload result here
Click to expand...
Click to collapse
First backup because if anything goes wrong u can restore it and surely tell me the results
Sorry for many questions.
waleeds1 said:
First backup because if anything goes wrong u can restore it and surely tell me the results
Click to expand...
Click to collapse
download 2.3 version of kernel ? or that test kernel?
TheSMGCraft said:
download 2.3 version of kernel ? or that test kernel?
Click to expand...
Click to collapse
Not the test because it isnt official and rven i did not try that
---------- Post added at 08:33 PM ---------- Previous post was at 08:18 PM ----------
TheSMGCraft said:
download 2.3 version of kernel ? or that test kernel?
Click to expand...
Click to collapse
Any news?
---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------
Or did u get a bootloop
waleeds1 said:
Not the test because it isnt official and rven i did not try that
---------- Post added at 08:33 PM ---------- Previous post was at 08:18 PM ----------
Any news?
---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------
Or did u get a bootloop
Click to expand...
Click to collapse
i start flash now ... backup ended a while ago
TheSMGCraft said:
i start flash now ... backup ended a while ago
Click to expand...
Click to collapse
I wish it to work with your phone
Nothing...
TheSMGCraft said:
i start flash now ... backup ended a while ago
Click to expand...
Click to collapse
i booted into recovery and flashed Core_kernel_2.3.zip, it ended fast and successful, phone booted normally and no changes are made