I have the stock rom sml29, and I'm trying to put the pi-llama 1.5, but after spending the motorola logo, it appears 'ready device' and automatically restarts.
I've tried any other rom, but it only works with sml29.
Can anyone help me?
Grateful.
mattzsep said:
I have the stock rom sml29, and I'm trying to put the pi-llama 1.5, but after spending the motorola logo, it appears 'ready device' and automatically restarts.
I've tried any other rom, but it only works with sml29.
Can anyone help me?
Grateful.
Click to expand...
Click to collapse
sml19 = ics?
which android version is it?
maybe you first need a regular update to 4.1.2 JB.
is your bootloader unlocked and a custom recovery installed?
regards
pangyaaaaaa said:
sml19 = ics?
which android version is it?
maybe you first need a regular update to 4.1.2 JB.
is your bootloader unlocked and a custom recovery installed?
regards
Click to expand...
Click to collapse
jelly bean sml29 retail brasil
have released bootloader and recovery installed
I've used other roms, but now I can not change ...
grateful
Related
Hi,
I got this phone today, and unlocked the bootloader using the htcdev website. I then flashed a rom, and wiped, and then flashed the boot.img using fastboot. It worked fine, but the cyanogenmod nightly wasn't very stable. I decided to flash a different rom, but I couldn't get anything else to work. The roms, now including the previous rom, don't boot past their boot animations and shut down and boot again. Any help would be much appreciated!
Also, when I power down from the bootloader it tries to start up again. I have to pull the battery.
Also, it's an AT&T version. ROM recommendations are needed, because I can't get anything to work. :'( Preferably de-sensitized. I've check the dev thread with all the ROMS and links.
Make sure you are doing full wipes for each rom and also flashing the boot image.
Sent from my HTC One
I do that
WildfireDEV said:
Make sure you are doing full wipes for each rom and also flashing the boot image.
Click to expand...
Click to collapse
Yeah, I do that, using the factory reset in twrp and then install the rom, and then I flash the boot image using
fastboot flash boot boot.img
which flashes it no problem. I did actually get the cyanogenmod to work, which is interesting.
Update
I've gotten a ROM to work. It's http://forum.xda-developers.com/showthread.php?t=1428726 A sensed ROM. Hmm...
Geckodudes said:
I've gotten a ROM to work. It's http://forum.xda-developers.com/showthread.php?t=1428726 A sensed ROM. Hmm...
Click to expand...
Click to collapse
You need to update to ICS first, otherwise it won't boot any JB or KitKat ROM.
Then S-off your device, it's really easy
Viajanteluz said:
You need to update to ICS first, otherwise it won't boot any JB or KitKat ROM.
Then S-off your device, it's really easy
Click to expand...
Click to collapse
Thanks! I'm running the "leaked" RUU which is supposed to update the firmware to ICS, right? Can you provide a link to S-off? I can't find anything. Well actually I can, but I can't understand it. :/
There you go: http://forum.xda-developers.com/showthread.php?t=2521157
I've changed CiD? because of Vodafone not updating to ICS.
Then upgraded with an AT&T ICS RUU - http://forum.xda-developers.com/showthread.php?t=2013122
Solved.
Viajanteluz said:
There you go: http://forum.xda-developers.com/showthread.php?t=2521157
I've changed CiD? because of Vodafone not updating to ICS.
Then upgraded with an AT&T ICS RUU - http://forum.xda-developers.com/showthread.php?t=2013122
Click to expand...
Click to collapse
Thanks. I updated to ICS and all the roms I've tried work great. Thanks a lot!
Geckodudes said:
Thanks. I updated to ICS and all the roms I've tried work great. Thanks a lot!
Click to expand...
Click to collapse
You're Welcome! :good:
Hi, Im trying to unlock my phone and the method im trying requires JB 4.1.1 stock from samsung (or 4.1.1 stock based ROM).
I've been looking around but I've only found the 4.1.2. Does anyone know where could I find a stock or stock based 4.1.1 ROM? I have a latin american s3 mini (GT-I8190L).
Thanks.
Arrrroz said:
Hi, Im trying to unlock my phone and the method im trying requires JB 4.1.1 stock from samsung (or 4.1.1 stock based ROM).
I've been looking around but I've only found the 4.1.2. Does anyone know where could I find a stock or stock based 4.1.1 ROM? I have a latin american s3 mini (GT-I8190L).
Thanks.
Click to expand...
Click to collapse
look here
http://www.tsar3000.com/Joomla/inde...iii-mini-firmwares&catid=55:samsung&Itemid=82
Ahmed.ragab said:
look here
http://www.tsar3000.com/Joomla/inde...iii-mini-firmwares&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
Thanks a lot. What recovery should i use?
Arrrroz said:
Thanks a lot. What recovery should i use?
Click to expand...
Click to collapse
Flash it via odin not recovery
Ahmed.ragab said:
Flash it via odin not recovery
Click to expand...
Click to collapse
Yeah, i did but i get stocked in the boot animation. I tried flashing the stock recovery that I found on a guide for installing 4.1.2 but I had the same issue. The problem might be that i need the 4.1.1. stock recovery, but I cant find it anywhere.
Arrrroz said:
Yeah, i did but i get stocked in the boot animation. I tried flashing the stock recovery that I found on a guide for installing 4.1.2 but I had the same issue. The problem might be that i need the 4.1.1. stock recovery, but I cant find it anywhere.
Click to expand...
Click to collapse
i think stock recovery or custom recovery not affecting in flashing via odin ?
I was trying to flash a new ROM (Viper One) and followed the instructions to update the firmware. I got as far as getting into the fastboot and relocking the device so I could update the firmware to the latest version (per the instructions). I tried to no avail to unlock the bootloader and came across a thread saying I need to have a stock kernel to unlock the bootloader again. What I didnt count on was that the previous custom kernel was still loaded on the device even though I did a factory reset (again per instructions). I have searched for a stock 4.3 kernel but cant find one so I can finish this.
Ideas?
Thanks so much, in advance!
Sheik_Yerbutay said:
I was trying to flash a new ROM (Viper One) and followed the instructions to update the firmware. I got as far as getting into the fastboot and relocking the device so I could update the firmware to the latest version (per the instructions). I tried to no avail to unlock the bootloader and came across a thread saying I need to have a stock kernel to unlock the bootloader again. What I didnt count on was that the previous custom kernel was still loaded on the device even though I did a factory reset (again per instructions). I have searched for a stock 4.3 kernel but cant find one so I can finish this.
Ideas?
Thanks so much, in advance!
Click to expand...
Click to collapse
You can find the Stock Kernel here.
StormyNight said:
You can find the Stock Kernel here.
Click to expand...
Click to collapse
Thanks!
I was able to get my phone back to where it was before (viperOne ROM thats running v 4.1.2 and Sense 5.0). I am trying to get this back to stock before I take to Sprint to replace the phone for the purple camera bug.
I guess what Im looking for is the stock kernel for v4.1.2 so I can then flash it and take it in. The one you had linked to was for v4.4.x and will not work.
Thanks in advance!
Sheik_Yerbutay said:
Thanks!
I was able to get my phone back to where it was before (viperOne ROM thats running v 4.1.2 and Sense 5.0). I am trying to get this back to stock before I take to Sprint to replace the phone for the purple camera bug.
I guess what Im looking for is the stock kernel for v4.1.2 so I can then flash it and take it in. The one you had linked to was for v4.4.x and will not work.
Thanks in advance!
Click to expand...
Click to collapse
Since, I don't know which version you are looking for you can pull the kernel out of the firmware for that version. You can check this site: http://forum.xda-developers.com/showthread.php?t=2576995 or this one: http://forum.xda-developers.com/showthread.php?t=2658910.
Hello guys,
I bought this Used G2 yesterday its Verizon version but its unlocked i don't know how they unlocked it but my non Verizon sim is working fine in it.
Now i want to upgrade to Android L.
I was checking the android version in phone and i saw that Chinese logo i have uploaded the image.
I Don't understand this what is this ?
My phone is currently using:
Code:
Baseband:
VS98024A-M8974A-AAAANAZM-2.0.20046
Kernel:
3.4.0-perf-gdf89a11
[email protected]
Build:
KOT49l.VS98024A
Software ver:
VS98024A
Don't know anything about recovery.
Now in phone it says its rooted
but when i try to install SuperSU it gives me this error (check the image)
Code:
"there is no Su binary installed and supersu cannot install it this is a problem!
Now my question is how do i upgrade this phone to Android 5.0 ? without loosing the ability to run my non Verizon sim.
Phone will always work with other sims since it is GSM unlocked . About that weird logo of yours, i couldn't really help but what i would do is flashing the 39A firmware once and for all so you can have Lollipop. Once from there, i suggest you to flash CloudyG2 3.3 so you wont suffer from battery draining and slow charge.
Good luck.
Luis_D1 said:
Phone will always work with other sims since it is GSM unlocked . About that weird logo of yours, i couldn't really help but what i would do is flashing the 39A firmware once and for all so you can have Lollipop. Once from there, i suggest you to flash CloudyG2 3.3 so you wont suffer from battery draining and slow charge.
Good luck.
Click to expand...
Click to collapse
Thanks for your reply.
I am new to Android i am a iOS user so can you tell me how do i flash this 39A a firmware ? and where do i find it ? (can you give me a link to a guide or something) ? also currently my phone is rooted or not and what kind of firmware its using currently ?
syedfaraz5 said:
Thanks for your reply.
I am new to Android i am a iOS user so can you tell me how do i flash this 39A a firmware ? and where do i find it ? (can you give me a link to a guide or something) ? also currently my phone is rooted or not and what kind of firmware its using currently ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2432476
Hello.
Got a K50-T3s and have a few questions, if someone can help me.
My stock version is vibeui_v3.0_1604_7.209.1_ST_K50-T3s (Android 5.1)
Tried to OTA update it but it is giving me this error "Network resquest failed or model is not fit"
Thinking to update it via flash tools. This is the latest stock rom to be applied via FT? vibeui_v3.5_1621_7.62.1_dev_k50-t3s_wc66355725.
Or should i flash a custom recovery and flash a custom rom like this one? http://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537.
Or should i do anything different thanks.
inouext said:
Hello.
Got a K50-T3s and have a few questions, if someone can help me.
My stock version is vibeui_v3.0_1604_7.209.1_ST_K50-T3s (Android 5.1)
Tried to OTA update it but it is giving me this error "Network resquest failed or model is not fit"
Thinking to update it via flash tools. This is the latest stock rom to be applied via FT? vibeui_v3.5_1621_7.62.1_dev_k50-t3s_wc66355725.
Or should i flash a custom recovery and flash a custom rom like this one? http://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537.
Or should i do anything different thanks.
Click to expand...
Click to collapse
Hi, I'm in your same situation, did you solve it?
Can you please post it how?
Jonny993 said:
Hi, I'm in your same situation, did you solve it?
Can you please post it how?
Click to expand...
Click to collapse
I installed a custom recovery CWM and flashed a stock mm rom via CWM.
inouext said:
I installed a custom recovery CWM and flashed a stock mm rom via CWM.
Click to expand...
Click to collapse
Thanks for reply!
Did you know a way to get back the 800Mhz frequency somehow?
I once read that if you flash a certain custom rom (Cuoco92's one for example) it will unlock the missing frequency because the T3S and T50 model are the same except for the fact that in t3s they disabled that frequency..
But I can't find any confirmation about it..
inouext said:
Hello.
Got a K50-T3s and have a few questions, if someone can help me.
My stock version is vibeui_v3.0_1604_7.209.1_ST_K50-T3s (Android 5.1)
Tried to OTA update it but it is giving me this error "Network resquest failed or model is not fit"
Thinking to update it via flash tools. This is the latest stock rom to be applied via FT? vibeui_v3.5_1621_7.62.1_dev_k50-t3s_wc66355725.
Or should i flash a custom recovery and flash a custom rom like this one? http://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537.
Or should i do anything different thanks.
Click to expand...
Click to collapse
I have exactly the same problem too.
Your link is for the K50a40. Does it work with the k50-t3s ?
Also, I am concerned that the FDD mode should still work