Hi, Im trying to unlock my phone and the method im trying requires JB 4.1.1 stock from samsung (or 4.1.1 stock based ROM).
I've been looking around but I've only found the 4.1.2. Does anyone know where could I find a stock or stock based 4.1.1 ROM? I have a latin american s3 mini (GT-I8190L).
Thanks.
Arrrroz said:
Hi, Im trying to unlock my phone and the method im trying requires JB 4.1.1 stock from samsung (or 4.1.1 stock based ROM).
I've been looking around but I've only found the 4.1.2. Does anyone know where could I find a stock or stock based 4.1.1 ROM? I have a latin american s3 mini (GT-I8190L).
Thanks.
Click to expand...
Click to collapse
look here
http://www.tsar3000.com/Joomla/inde...iii-mini-firmwares&catid=55:samsung&Itemid=82
Ahmed.ragab said:
look here
http://www.tsar3000.com/Joomla/inde...iii-mini-firmwares&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
Thanks a lot. What recovery should i use?
Arrrroz said:
Thanks a lot. What recovery should i use?
Click to expand...
Click to collapse
Flash it via odin not recovery
Ahmed.ragab said:
Flash it via odin not recovery
Click to expand...
Click to collapse
Yeah, i did but i get stocked in the boot animation. I tried flashing the stock recovery that I found on a guide for installing 4.1.2 but I had the same issue. The problem might be that i need the 4.1.1. stock recovery, but I cant find it anywhere.
Arrrroz said:
Yeah, i did but i get stocked in the boot animation. I tried flashing the stock recovery that I found on a guide for installing 4.1.2 but I had the same issue. The problem might be that i need the 4.1.1. stock recovery, but I cant find it anywhere.
Click to expand...
Click to collapse
i think stock recovery or custom recovery not affecting in flashing via odin ?
Related
I have the stock rom sml29, and I'm trying to put the pi-llama 1.5, but after spending the motorola logo, it appears 'ready device' and automatically restarts.
I've tried any other rom, but it only works with sml29.
Can anyone help me?
Grateful.
mattzsep said:
I have the stock rom sml29, and I'm trying to put the pi-llama 1.5, but after spending the motorola logo, it appears 'ready device' and automatically restarts.
I've tried any other rom, but it only works with sml29.
Can anyone help me?
Grateful.
Click to expand...
Click to collapse
sml19 = ics?
which android version is it?
maybe you first need a regular update to 4.1.2 JB.
is your bootloader unlocked and a custom recovery installed?
regards
pangyaaaaaa said:
sml19 = ics?
which android version is it?
maybe you first need a regular update to 4.1.2 JB.
is your bootloader unlocked and a custom recovery installed?
regards
Click to expand...
Click to collapse
jelly bean sml29 retail brasil
have released bootloader and recovery installed
I've used other roms, but now I can not change ...
grateful
Hi Guys,
I'm new here. Well, i would like to know on how do i revert back to S Advance stock firmware and recovery, as currently i'm on CM10.1.
Thanks in advance.
marshalz said:
Hi Guys,
I'm new here. Well, i would like to know on how do i revert back to S Advance stock firmware and recovery, as currently i'm on CM10.1.
Thanks in advance.
Click to expand...
Click to collapse
Flash stock Jelly Bean with Odin and everything will be ok.
R_a_z_v_a_n said:
Flash stock Jelly Bean with Odin and everything will be ok.
Click to expand...
Click to collapse
So i just flash the stock firmware, and recovery mode will revert to stock as well? I'm planning to revert to Gingerbread, as JB slows down my phone.
marshalz said:
So i just flash the stock firmware, and recovery mode will revert to stock as well? I'm planning to revert to Gingerbread, as JB slows down my phone.
Click to expand...
Click to collapse
Ok then, first you must flash with Odin Jelly Bean, and after that follow this guide to downgrade to Ginge Bread.
[ Solved ] How to Downgrade JB 4.1.2 to GB 2.3.6
I was trying to flash a new ROM (Viper One) and followed the instructions to update the firmware. I got as far as getting into the fastboot and relocking the device so I could update the firmware to the latest version (per the instructions). I tried to no avail to unlock the bootloader and came across a thread saying I need to have a stock kernel to unlock the bootloader again. What I didnt count on was that the previous custom kernel was still loaded on the device even though I did a factory reset (again per instructions). I have searched for a stock 4.3 kernel but cant find one so I can finish this.
Ideas?
Thanks so much, in advance!
Sheik_Yerbutay said:
I was trying to flash a new ROM (Viper One) and followed the instructions to update the firmware. I got as far as getting into the fastboot and relocking the device so I could update the firmware to the latest version (per the instructions). I tried to no avail to unlock the bootloader and came across a thread saying I need to have a stock kernel to unlock the bootloader again. What I didnt count on was that the previous custom kernel was still loaded on the device even though I did a factory reset (again per instructions). I have searched for a stock 4.3 kernel but cant find one so I can finish this.
Ideas?
Thanks so much, in advance!
Click to expand...
Click to collapse
You can find the Stock Kernel here.
StormyNight said:
You can find the Stock Kernel here.
Click to expand...
Click to collapse
Thanks!
I was able to get my phone back to where it was before (viperOne ROM thats running v 4.1.2 and Sense 5.0). I am trying to get this back to stock before I take to Sprint to replace the phone for the purple camera bug.
I guess what Im looking for is the stock kernel for v4.1.2 so I can then flash it and take it in. The one you had linked to was for v4.4.x and will not work.
Thanks in advance!
Sheik_Yerbutay said:
Thanks!
I was able to get my phone back to where it was before (viperOne ROM thats running v 4.1.2 and Sense 5.0). I am trying to get this back to stock before I take to Sprint to replace the phone for the purple camera bug.
I guess what Im looking for is the stock kernel for v4.1.2 so I can then flash it and take it in. The one you had linked to was for v4.4.x and will not work.
Thanks in advance!
Click to expand...
Click to collapse
Since, I don't know which version you are looking for you can pull the kernel out of the firmware for that version. You can check this site: http://forum.xda-developers.com/showthread.php?t=2576995 or this one: http://forum.xda-developers.com/showthread.php?t=2658910.
Hello
I'm with a custom rom that have android 6.0.1. Can I downgrade to another custom with 5.1.1??
xd3ath said:
Hello
I'm with a custom rom that have android 6.0.1. Can I downgrade to another custom with 5.1.1??
Click to expand...
Click to collapse
Yes just check if you have the right booloader and modem.
Soufiansky said:
Yes just check if you have the right booloader and modem.
Click to expand...
Click to collapse
And if I don't have? Will hardbrick my phone? And How to do that?
My experience is very limited
xd3ath said:
And if I don't have? Will hardbrick my phone? And How to do that?
My experience is very limited
Click to expand...
Click to collapse
No there is no hardbrick . If you are not on the right bootloader and modem the rom may not boot , so you just flash the right ones.
If you want to came back to LP flash lollipop last booloader and modem and you are ready to go.
Basically , bootloader allows you to boot the rom , modem is everything related to signal , wifi...etc if you are in the wrong one you will not have signal or some things working
xd3ath said:
Hello
I'm with a custom rom that have android 6.0.1. Can I downgrade to another custom with 5.1.1??
Click to expand...
Click to collapse
Yes, you can. First backup your android 6.0.1 from your recovery, in case something go wrong, you can go back.
Won't flashing/ downgrading the bootloader brick the phone ? How do you flash the LP bootloader and modem?Please can you give a step by step guide and where the correct files can be found? Thanks
Hello.
Got a K50-T3s and have a few questions, if someone can help me.
My stock version is vibeui_v3.0_1604_7.209.1_ST_K50-T3s (Android 5.1)
Tried to OTA update it but it is giving me this error "Network resquest failed or model is not fit"
Thinking to update it via flash tools. This is the latest stock rom to be applied via FT? vibeui_v3.5_1621_7.62.1_dev_k50-t3s_wc66355725.
Or should i flash a custom recovery and flash a custom rom like this one? http://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537.
Or should i do anything different thanks.
inouext said:
Hello.
Got a K50-T3s and have a few questions, if someone can help me.
My stock version is vibeui_v3.0_1604_7.209.1_ST_K50-T3s (Android 5.1)
Tried to OTA update it but it is giving me this error "Network resquest failed or model is not fit"
Thinking to update it via flash tools. This is the latest stock rom to be applied via FT? vibeui_v3.5_1621_7.62.1_dev_k50-t3s_wc66355725.
Or should i flash a custom recovery and flash a custom rom like this one? http://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537.
Or should i do anything different thanks.
Click to expand...
Click to collapse
Hi, I'm in your same situation, did you solve it?
Can you please post it how?
Jonny993 said:
Hi, I'm in your same situation, did you solve it?
Can you please post it how?
Click to expand...
Click to collapse
I installed a custom recovery CWM and flashed a stock mm rom via CWM.
inouext said:
I installed a custom recovery CWM and flashed a stock mm rom via CWM.
Click to expand...
Click to collapse
Thanks for reply!
Did you know a way to get back the 800Mhz frequency somehow?
I once read that if you flash a certain custom rom (Cuoco92's one for example) it will unlock the missing frequency because the T3S and T50 model are the same except for the fact that in t3s they disabled that frequency..
But I can't find any confirmation about it..
inouext said:
Hello.
Got a K50-T3s and have a few questions, if someone can help me.
My stock version is vibeui_v3.0_1604_7.209.1_ST_K50-T3s (Android 5.1)
Tried to OTA update it but it is giving me this error "Network resquest failed or model is not fit"
Thinking to update it via flash tools. This is the latest stock rom to be applied via FT? vibeui_v3.5_1621_7.62.1_dev_k50-t3s_wc66355725.
Or should i flash a custom recovery and flash a custom rom like this one? http://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537.
Or should i do anything different thanks.
Click to expand...
Click to collapse
I have exactly the same problem too.
Your link is for the K50a40. Does it work with the k50-t3s ?
Also, I am concerned that the FDD mode should still work