Cyanogenmod vs Stock - Galaxy Tab 8.9 General

Hi there,
i have a Galaxy Tab 8.0 P7300. I want to know if there is a *better* cyanogenmod rom than the ICS stock rom?
I don't like putting new roms on my device every other week and want something that just works, but i don't know how stable the CM roms really are?!
I ask because the devices is not the fastes and im looking for a way to tune it a little bit.

Insignificant said:
Hi there,
i have a Galaxy Tab 8.0 P7300. I want to know if there is a *better* cyanogenmod rom than the ICS stock rom?
I don't like putting new roms on my device every other week and want something that just works, but i don't know how stable the CM roms really are?!
I ask because the devices is not the fastes and im looking for a way to tune it a little bit.
Click to expand...
Click to collapse
Well, CM is good and has way more features than the stock one, but if you use your tab for heavy games playing
then stock ICS is the best cuz CM (9,10,10.1,10.2) is kinda laggy while playing heavy games
in my personal experience, the best ROM for our tab is an optimized stock ICS like this one:
http://forum.xda-developers.com/showpost.php?p=48307877

omarainea said:
Well, CM is good and has way more features than the stock one, but if you use your tab for heavy games playing
then stock ICS is the best cuz CM (9,10,10.1,10.2) is kinda laggy while playing heavy games
in my personal experience, the best ROM for our tab is an optimized stock ICS like this one:
http://forum.xda-developers.com/showpost.php?p=48307877
Click to expand...
Click to collapse
Thanks I will try that one. One question can i use odin to flash it? I don't have CWM installed, or does it requiere to use CWM?!

Insignificant said:
Thanks I will try that one. One question can i use odin to flash it? I don't have CWM installed, or does it requiere to use CWM?!
Click to expand...
Click to collapse
You can't flash it or any other ROMs by odin, you have to install CWM through odin first,
Then you'll be able to flash it through odin.
You can find odin and CWM that can be flashed through odin in the second post in the same thread
http://forum.xda-developers.com/showpost.php?p=48307917

omarainea said:
You can't flash it or any other ROMs by odin, you have to install CWM through odin first,
Then you'll be able to flash it through odin.
You can find odin and CWM that can be flashed through odin in the second post in the same thread
http://forum.xda-developers.com/showpost.php?p=48307917
Click to expand...
Click to collapse
Thanks a lot

Are current builds of CM 10.2 still laggy with Netflix? I tried it a few months back (a September build) and it worked pretty well EXCEPT for the Netflix lagging/buffering problems.

drwtsn32x said:
Are current builds of CM 10.2 still laggy with Netflix? I tried it a few months back (a September build) and it worked pretty well EXCEPT for the Netflix lagging/buffering problems.
Click to expand...
Click to collapse
Seems pretty good on C-O-M's latest build of CM10.2. I only checked it for a minute, but it ran smooth.

Related

Couple of ROM questions

Hello, SGS newbie here (phone not actually arrived yet, will be here Monday).
I think the phone looks amazing, only thing I'm not mad on is the iPhone look and feel Samsung have gone for with the home screens, so I'm thinking of either customising it or putting a different ROM on the device. Cyanogen, Darky's and MIUI are the ones I've read about the most.
What is Darky's? Is it more or less a stock Android with LauncherPro, or is it more than that?
Edit: also wondering - is the Samsung Gingerbread ROM worth trying, does it solve some of the performance problems of earlier versions?
Everything is worth trying! If you want to skip the usual newbie routine, then jump straight ahead to an AOSP ROM like CM7 or MIUI... You won't regret it.
Try Tweaky's AOSP
click on my signature to check out Tweaky's AOSP rom - a slim and quick Nexus S (purer Android) look-a-like rom
oh....and I expect your phone will come with GB installed any way...if not, depending on your supplier, Kies may offer you the firmware upgrade when you install it, and despite some reports (in my opinion) it represents a big improvement over 2.2 Froyo.
All the new custom roms are based on 2.3.3 gingerbread any way
Also pretty newbified here, but is it possible to get GB simply on a kernel flash and stay on stock rom, or will i have to flash a custom rom to do this. I have froyo 2.2 but speedmods kernel - pretty happy but would like to try out GB.
wangchung_sucks said:
Also pretty newbified here, but is it possible to get GB simply on a kernel flash and stay on stock rom, or will i have to flash a custom rom to do this. I have froyo 2.2 but speedmods kernel - pretty happy but would like to try out GB.
Click to expand...
Click to collapse
Just flash the JVH gingerbread with bootloaders.
STOCK.
wangchung_sucks said:
Also pretty newbified here, but is it possible to get GB simply on a kernel flash and stay on stock rom, or will i have to flash a custom rom to do this. I have froyo 2.2 but speedmods kernel - pretty happy but would like to try out GB.
Click to expand...
Click to collapse
Navigate to Ramad's stock rom thread, choice of stock 2.3.3 rom there, both odexed and deodexed
Cm7 is pretty much same as nexus s rom with lots of additions( theme manager,dsp,cyanogenmod settings,etc). You can also try sammy gb roms if you wish( flash with odin,there is guides about it just google) but you have to downgrade the bootloaders before you go back to cm7 ( I bet you will)
Thanks for the info folks. I guess I'll stay on the stock rom at least for a few weeks and get used to it although I reckon I'll use launcherpro with it as I don't like the samsung launcher.
Vivasanti said:
JVH
Click to expand...
Click to collapse
That's something else I meant to ask, what are these three letter codes I see around - are they version numbers for the Samsung roms?
That's something else I meant to ask, what are these three letter codes I see around - are they version numbers for the Samsung roms?[/QUOTE]
ABC ABD ABG versions of firmware build 2.2.1 version ABC followed by ABD etc
samfirmware.com for build list ..
jje

[Q] Which rom should i install ?

Hi
I've just bought a Galaxy I9000 & wondered which is the best stable Rom to use daily,
also, do i have to change the kernel for certain roms ?
Thanx in advance
It really depends what you want from the phone but... the best full custom ROM to go use for daily use I truly believe is CyanogenMod, there are two main CyanogenMod releases for the i9000.
First of all you have CyanogenMod 9 which is based upon Ice Cream Sandwich. If you download this make sure you get version 9.1.0 stable.
Secondly you have CyanogenMod 7 which is based upon Gingerbread. If you download this make sure you get version 7.2.0 stable.
You don't have to change the kernel for either of these ROM's (or any ROM as far as I know) but you can if you want more from the phone like having the ability to overclock it for example.
If you have to ask... yes CyanogenMod 10 is available but it has not yet been given the green light for a stable release so you may want to stay away from it until it reaches stable status.
Thanx for a spot on answer, just what i wanted to know. Thanx again.
the stock one!
manimaluk said:
Hi
I've just bought a Galaxy I9000 & wondered which is the best stable Rom to use daily,
also, do i have to change the kernel for certain roms ?
Thanx in advance
Click to expand...
Click to collapse
Hi,
I suggest you to use for some time the "stock" samsung rom, in order that you can experience what features and apps you are missing (if any). In my case, when I was on the stock samsung rom I used to change the launcher because the defautl one didn't support display rotation. But this is me: I have several friend that decided to stay with the stock rom.
I personally use cyanogen, with stock kernels. You might very well change the kernel too (if you need special features, which is not my case).
Otherwise, if you just wanna have fun, go and install cyanogen. but be careful!! remember to make a backup of the efs folder (look around here how to do), beacuse if it is dameged during flashing you night end up with an unusable phone...
ciao,
marco
zuphus said:
but be careful!! remember to make a backup of the efs folder (look around here how to do), beacuse if it is dameged during flashing you night end up with an unusable phone...
Click to expand...
Click to collapse
When this happens we flash back to stock with a stock ROM from SamMobile or a stock based ROM, fixes lost EFS info But good shout, backups do save a lot of headaches!
manimaluk said:
Hi
I've just bought a Galaxy I9000 & wondered which is the best stable Rom to use daily,
also, do i have to change the kernel for certain roms ?
Thanx in advance
Click to expand...
Click to collapse
I prefer the stock rom are most stable, but i will root and try to delete or freeze the unlike/seldom use stock app. personnel opinion.
Thanx to everyone for the sound advice,i quite like the stock rom.
I tried cyanogen 7.2 briefly,but when i went to the file manager,it showed nothing on my sd card when really it has plenty of music files and apps on it.
Dunno why that was, anyway back on stock for now, might try again soon. Thanx again.
Best rom daily use C-Rom bean 1.5.0 (Cm10) @aways #aways
Greenlight is coming next week
playing GTA3 / nova3/maxpayne/
Batterylife is nice OTA Update Works
Don't w8
Sent from my GT-I9000 using xda premium

Just recently bought the Galaxy S, looking for some ROM recommendations...

Hello, I recently bought myself a new Galaxy S i9000 for mostly multi-media purposes. I was looking for a smartphone that would suit my audiophilia needs and after lots of googling I found out that this is just the phone for that, so I bit the bullet and bought an unlocked one
Came in the mail today and I need your help with this! I've had androids before so I am somewhat familiar with the ecosystem, however since I joined the galaxy S bandwagon quite late, I'm REALLY behind on Roms and such.
Obviously, since I bought such an old device, I had my reasons; which are music. I'm gonna root this soon and I wanna install a rom with these sort of features.
I need a rom thats:
-Smooth as it can be
-Has the Voodoo Sound Kernal (according to everybody, that's how one unleashes the full potential of the sound)
-....won't get rid of my unlock
I don't care for customization, games, social media, etc. I just want a rom that's smooth, responsive, and has voodoo so I can enjoy my music on the go
Thanks!
If you want to go for custom ROMs then CM 10 all the way, its nighty so is still has bugs. But is good enough for daily usage. And damn is smooth I will never go back to GB or anything else...
You can try also CM 9, there is a stable version. Look for it in the development section.
This phone once unlocked, will never lock again!! unless you want to
dukuletz said:
If you want to go for custom ROMs then CM 10 all the way, its nighty so is still has bugs. But is good enough for daily usage. And damn is smooth I will never go back to GB or anything else...
You can try also CM 9, there is a stable version. Look for it in the development section.
This phone once unlocked, will never lock again!! unless you want to
Click to expand...
Click to collapse
CM10 Definitely LOOKS smooth, but is it fast and responsive? I've seen youtube videos (the very few there are) of single core phones that can only handle CM10 somewhat OK....they are somewhat smooth, but unresponsive when it comes to opening apps and menus (lots of loading and stuff). So is CM10 for this phone fast as well as smooth?
ReDDs3D said:
Hello, I recently bought myself a new Galaxy S i9000 for mostly multi-media purposes. I was looking for a smartphone that would suit my audiophilia needs and after lots of googling I found out that this is just the phone for that, so I bit the bullet and bought an unlocked one
Came in the mail today and I need your help with this! I've had androids before so I am somewhat familiar with the ecosystem, however since I joined the galaxy S bandwagon quite late, I'm REALLY behind on Roms and such.
Obviously, since I bought such an old device, I had my reasons; which are music. I'm gonna root this soon and I wanna install a rom with these sort of features.
I need a rom thats:
-Smooth as it can be
-Has the Voodoo Sound Kernal (according to everybody, that's how one unleashes the full potential of the sound)
-....won't get rid of my unlock
I don't care for customization, games, social media, etc. I just want a rom that's smooth, responsive, and has voodoo so I can enjoy my music on the go
Thanks!
Click to expand...
Click to collapse
JB Custom Rom C-RoM Mix or C-RoM BeaN are highly recommended. You won't get disappointed with these Roms.
I've tried several Custom Roms, but i found C-RoMs to be the best, very fast, smooth, responsive, and stable.
This JB Custom C-RoM was benchmarked by Ratborg to be the fastest JB Custom Rom.
The kernel (Semaphore) supports Voodoo Sound.
http://forum.xda-developers.com/showpost.php?p=32493954&postcount=1
http://forum.xda-developers.com/showpost.php?p=29086242&postcount=1
http://forum.xda-developers.com/showpost.php?p=30930948&postcount=1
GrippingSphere said:
JB Custom Rom C-RoM Mix or C-RoM BeaN are highly recommended. You won't get disappointed with these Roms.
I've tried several Custom Roms, but i found them to be the best, very fast, smooth, responsive, and stable.
This JB Custom C-RoM was benchmarked by Ratborg to be the fastest JB Custom Rom.
The kernel (Semaphore) supports Voodoo Sound.
http://forum.xda-developers.com/showpost.php?p=32493954&postcount=1
http://forum.xda-developers.com/showpost.php?p=29086242&postcount=1
http://forum.xda-developers.com/showpost.php?p=30930948&postcount=1
Click to expand...
Click to collapse
Wow this is great, thanks alot friend!
Umm, but could you help me out I've flashed ROMS before but I've never flashed a kernel ever. How do I safely and efficiently do that? I just rooted my device and am now running stock 2.2 . How do I go on about flashing the kernal and the Rom? This looks amazing!
ReDDs3D said:
Wow this is great, thanks alot friend!
Umm, but could you help me out I've flashed ROMS before but I've never flashed a kernel ever. How do I safely and efficiently do that? I just rooted my device and am now running stock 2.2 . How do I go on about flashing the kernal and the Rom? This looks amazing!
Click to expand...
Click to collapse
The Rom contains the Kernel already, so unless you want to change or upgrade the built-in Kernel that's the time you have to flash it.
Flashing of Rom or Kernel usually can be made through CWM by going into Recovery Mode.
If you're coming from Gingerbread, the safest procedure is to flash an ICS CM9 first before this recommended C-RoM (which is based on CM10 and AOKP), this is to avoid getting your IMEI invalid.
During flashing of a Rom, you will have to re-flash twice or sometimes 3x before getting successful due to Android system and Partition Layout differences.
Don't forget to backup your important database and applications via Titanium Backup or GoBackup so you can restore them back after successfully flashing the new Rom.
Good luck and enjoy flashing.
Try this configuration, i have it my self... it runs really well, is not unresponssive at all, maybe some hiccups but overall is good.
http://forum.xda-developers.com/showpost.php?p=30500816&postcount=3
GrippingSphere said:
JB Custom Rom C-RoM Mix or C-RoM BeaN are highly recommended. You won't get disappointed with these Roms.
I've tried several Custom Roms, but i found C-RoMs to be the best, very fast, smooth, responsive, and stable.
This JB Custom C-RoM was benchmarked by Ratborg to be the fastest JB Custom Rom.
The kernel (Semaphore) supports Voodoo Sound.
http://forum.xda-developers.com/showpost.php?p=32493954&postcount=1
http://forum.xda-developers.com/showpost.php?p=29086242&postcount=1
http://forum.xda-developers.com/showpost.php?p=30930948&postcount=1
Click to expand...
Click to collapse
GrippingSphere said:
The Rom contains the Kernel already, so unless you want to change or upgrade the built-in Kernel that's the time you have to flash it.
Flashing of Rom or Kernel usually can be made through CWM by going into Recovery Mode.
If you're coming from Gingerbread, the safest procedure is to flash an ICS CM9 first before this recommended C-RoM (which is based on CM10 and AOKP), this is to avoid getting your IMEI invalid.
During flashing of a Rom, you will have to re-flash twice or sometimes 3x before getting successful due to Android system and Partition Layout differences.
Don't forget to backup your important database and applications via Titanium Backup or GoBackup so you can restore them back after successfully flashing the new Rom.
Good luck and enjoy flashing.
Click to expand...
Click to collapse
Alright so this ROM contains the "sephamore" kernal with voodoo sound itself? Cool! Um, so I first flash a CM9 ROM, and then from there flash this?
ReDDs3D said:
Alright so this ROM contains the "sephamore" kernal with voodoo sound itself? Cool! Um, so I first flash a CM9 ROM, and then from there flash this?
Click to expand...
Click to collapse
Yes the Rom contains Semaphore kernel and yes you have to flash CM9 first and from there flash C-RoM.
Semaphore kernel supports vodoo sound but i think you have to install an application that produces the voodoo sound itself. I'm not sure but you have to further research on this.
Sent from my GT-I9000 using xda app-developers app

[Q] How to avaoid post-flash bootloop?

Hello people,
This has without a doubt been asked before but I haven't been able to find an answer. My problem is this:
A while back I flashed the then latest available version of the MIUI.us ROM for my international SGS i9000. Everything went fine with the flashing; I had to flash the ROM four times in part due to the new CM10 partition layout. Since the flashing was done late at night, I turned my phone of and plugged in the charger for it to charge during the night. The next day when I tried booting it up, the phone never got beyond the kernel screen. I didn't pay to much attention to this since I already had been thinking about flashing the CM10 ROM anyway and this seemed like a good time to do so.
I saw no other solution to escape the bootloop but to go back to stock (2.3.3 for my region) and then root the phone again (CF's method) and proceed with flashing my ROM of choice. I did not use a PIT-file in going back to stock. I flashed stock using ODIN v1.7 (I think). My computer at the time was running 64-bit Windows 7. The stock ROM I used, I found on a stock ROM collection thread here on XDA since the stock ROM from sammobile.com only got stuck in bootloop already at the first boot up after the flash with ODIN was complete.
Next I flashed the M2-version of the CM10 ROM and everything went fine. Since my phone already had the new partition layout from previously having flashed the MIUI.us ROM, I only needed to flash the CM10 ROM once.
The CM10 ROM worked like a dream for about two weeks. I stayed on the M2 during this time. After two weeks though, my phone again got stuck in bootloop unable to get beyond the kernel screen. Again it had been turned off and plugged to the charger during the night preceding the bootloop; a thing very common in my use case.
In neither of the cases did I change anything about the ROM I flashed; no custom kernels, no custom modems, everything was as it came with the ROM.
My question then is this:
What do I have to do in order to avoid ending up in bootloop again?
My thought was that I should return to stock and do everything from scratch again but this time use a PIT-file in order to make things "the right way". The thing is that half the flash-guides say one should use a PIT-file and the other half advice you not use a PIT-file since this would increase the risk of bricking your phone. Is there any point in using a PIT-file when flashing the stock ROM since flashing the CM10 ROM would change the partition layout anyways?
Am I taking the wrong approach to this? I really liked CM10 and would like to try out the stable version.
Sorry for the very long post.
Thanks in advance.
The pit file contains information about the partition layout. When you go back to stock from JB, you should use it. Try again going to stock with pit file and then flashing cm9 and then cm10. This way is the safest.
Search next time:
http://forum.xda-developers.com/showthread.php?t=987314
Sent from my GT-I9000
amerkiller1995 said:
The pit file contains information about the partition layout. When you go back to stock from JB, you should use it. Try again going to stock with pit file and then flashing cm9 and then cm10. This way is the safest.
Search next time:
http://forum.xda-developers.com/showthread.php?t=987314
Sent from my GT-I9000
Click to expand...
Click to collapse
Seems legit. I'll try that. That particular thread did not show up when I was searching for solutions to my problem. Thank you for your answer and for your patience.
Glad I helped. Please post here when the problem is solved.
Sent from my GT-I9000
amerkiller1995 said:
Try again going to stock with pit file and then flashing cm9 and then cm10. This way is the safest.
Sent from my GT-I9000
Click to expand...
Click to collapse
I just got to thinking. As you might have heard the CM-team changed the partition layout after a certain version of their CM10 release. When going from Stock to CM9 and then to CM10 is it all right if I flash the stable version of each release or should I go from Stock to CM9 to CM10 pre-partition layout change to CM10 post-partition layout change?
Also: should I prefer the Stock ROM found at sammobile.com or are the files found on this thread better?
Thanks in advance.
kayjay7 said:
I just got to thinking. As you might have heard the CM-team changed the partition layout after a certain version of their CM10 release. When going from Stock to CM9 and then to CM10 is it all right if I flash the stable version of each release or should I go from Stock to CM9 to CM10 pre-partition layout change to CM10 post-partition layout change?
Also: should I prefer the Stock ROM found at sammobile.com or are the files found on this thread better?
Thanks in advance.
Click to expand...
Click to collapse
go to the stable edition of each version
about the stock rom, use either, it doesnt matter
amerkiller1995 said:
go to the stable edition of each version
about the stock rom, use either, it doesnt matter
Click to expand...
Click to collapse
Aight! Will try that out and see what happens. Thanks again for your reply. Btw, should I go with the CM9 stable or the CM9.1 stable? Maybe it doesn't matter in my case since CM10 stable is the final aim of the project? As I understand it CM9.1 stable is only a maintenance release?
Sorry again and thanks for your patience.
kayjay7 said:
Aight! Will try that out and see what happens. Thanks again for your reply. Btw, should I go with the CM9 stable or the CM9.1 stable? Maybe it doesn't matter in my case since CM10 stable is the final aim of the project? As I understand it CM9.1 stable is only a maintenance release?
Sorry again and thanks for your patience.
Click to expand...
Click to collapse
no need to be sorry, i like helping
you're right, it doesn't matter, maybe for the placebo effect use 9.1
amerkiller1995 said:
no need to be sorry, i like helping
you're right, it doesn't matter, maybe for the placebo effect use 9.1
Click to expand...
Click to collapse
I'll do that and report back later this week. Thanks again for your time.
Well I finally had time to flash my phone. I flashed stock using the 512 PIT-file. Then I flashed CM9.1 stable and finally CM10 stable; like you advised me to. The only problem when flashing stock was that the single-file stock ROM found on sammobile.com does not seem to work for me; I get stuck in bootloop when I flash this file (doesn't matter if I use a PIT-file or not when doing so). I tried using the three-file stock ROM found on the XDA forums (with PIT) and this time it worked. Other than that everything went fine. I hope the post-flash bootloop phenomenon I've experienced earlier does not appear again.
One more thing: I also flashed the 4.2 keyboard with the swype-like function through recovery [Android4.2_Keyboard_v2_gnufabio.zip]. How do I go about uninstalling it?
kayjay7 said:
Well I finally had time to flash my phone. I flashed stock using the 512 PIT-file. Then I flashed CM9.1 stable and finally CM10 stable; like you advised me to. The only problem when flashing stock was that the single-file stock ROM found on sammobile.com does not seem to work for me; I get stuck in bootloop when I flash this file (doesn't matter if I use a PIT-file or not when doing so). I tried using the three-file stock ROM found on the XDA forums (with PIT) and this time it worked. Other than that everything went fine. I hope the post-flash bootloop phenomenon I've experienced earlier does not appear again.
One more thing: I also flashed the 4.2 keyboard with the swype-like function through recovery [Android4.2_Keyboard_v2_gnufabio.zip]. How do I go about uninstalling it?
Click to expand...
Click to collapse
You'll have to extract the cm10 keyboard apk from the cm10 zip file and put it in /system/app folder.
Tip: If you don't like cm10 or want something cool, then you can download flash another JB ROM, eg Slimbean, C-Rom, Remics-JB, X-bean etc.
Sent from my GT-I9000
To answer my own question: apparently the multi-file ROM found at sammobile.com is meant to be used with Heimdall. But as I understand it Odin is better for going back to Stock WITH re-partiotion (PIT-file). Am I wrong?
amerkiller1995 said:
You'll have to extract the cm10 keyboard apk from the cm10 zip file and put it in /system/app folder.
Click to expand...
Click to collapse
I was wondering how to uninstall the 4.2 keyboard I installed not the stock AOSP keyboard that comes preinstalled with CM10.
amerkiller1995 said:
Tip: If you don't like cm10 or want something cool, then you can download flash another JB ROM, eg Slimbean, C-Rom, Remics-JB, X-bean etc.
Click to expand...
Click to collapse
I find CM10 to be awsome. As I understand it basically *all* other ROMs are based off of CM. Out of the alternative ROMs you mentioned I would probably try out X-Bean and Slim Bean; I really like the look and feel of Vanilla Android. One thing I do miss in CM10 is the kill all button in the task manager. And that apps really close and release their memory when I close them.
kayjay7 said:
I was wondering how to uninstall the 4.2 keyboard I installed not the stock AOSP keyboard that comes preinstalled with CM10.
I find CM10 to be awsome. As I understand it basically *all* other ROMs are based off of CM. Out of the alternative ROMs you mentioned I would probably try out X-Bean and Slim Bean; I really like the look and feel of Vanilla Android. One thing I do miss in CM10 is the kill all button in the task manager. And that apps really close and release their memory when I close them.
Click to expand...
Click to collapse
I am not sure, but i think that when you installed the 4.2 keyboard, it replaced the aosp one, so you wil have to open the CM10 zip file, find the aosp keyboard .apk and put it on your phone in /system/app and then set the permissions accordingly.
Regarding other ROMs, yes they are based off cm10, but some people say cm10 is a bit slow so they prefer other versions, some with extra feautures, themes or removed things.
amerkiller1995 said:
I am not sure, but i think that when you installed the 4.2 keyboard, it replaced the aosp one.
Click to expand...
Click to collapse
Nope, both are still there. The main reason I would like to uninstall the 4.2-version is because the swype functionality only supports English (I'm multilingual). I was hoping I wouldn't need to install the Swype keyboard if the 4.2 stock keyboard worked completely with all my preferred languages. No need to have an extra keyboard installed if I'm not gonna use it.
amerkiller1995 said:
Regarding other ROMs, yes they are based off cm10, but some people say cm10 is a bit slow so they prefer other versions, some with extra features, themes or removed things.
Click to expand...
Click to collapse
Out of X-Bean and Slim Bean which one would you recommend and why? What are you running yourself? I don't know why but it just *feels* like CM10 is more stable (although, admittedly, I haven't tried any of the ROMs you listed). I guess in a way CM10 is the Official Custom ROM with the most up-to-date developer support. For instance CM10 went to Android v4.1.2 quite a while ago (when compared with other ROMs). When it comes to CM10 being a bit slow, lets face it; the i9000, although being a very good phone, is more than two years old at this point.
kayjay7 said:
Nope, both are still there. The main reason I would like to uninstall the 4.2-version is because the swype functionality only supports English (I'm trilingual). I was hoping I wouldn't need to install the Swype keyboard if the 4.2 stock keyboard worked completely with all my preferred languages. No need to have an extra keyboard installed if I'm not gonna use it.
Out of X-bean and Slim Bean which one would you recommend and why? What are you running yourself?
Click to expand...
Click to collapse
If both are there then delete the 4.2 apk and reboot your system. I dont think there is a way to uninstall it.
I use Remics-JB because of the S3 look. X-bean and slimbean are from the top of my head,both of them are focused on speed. There are many more, choose the one you like.
amerkiller1995 said:
If both are there then delete the 4.2 apk and reboot your system. I dont think there is a way to uninstall it.
Click to expand...
Click to collapse
The thing is it came as a ZIP-file; not an apk. I had to install it through recovery mode.
kayjay7 said:
The thing is it came as a ZIP-file; not an apk. I had to install it through recovery mode.
Click to expand...
Click to collapse
Flashing a zip just places some files in some directories. When you flashed the keyboard, all it did was copy the apk to /system/app.
Delete it and you should be OK.
Sent from my GT-I9000
amerkiller1995 said:
Flashing a zip just places some files in some directories. When you flashed the keyboard, all it did was copy the apk to /system/app.
Delete it and you should be OK.
Sent from my GT-I9000
Click to expand...
Click to collapse
Seems about right. I can't figure out which apk it is though. None of the ones listed has a name even suggesting it is a keyboard.
Open the keyboard zip you flashed and check the name of the apk
Sent from my GT-I9000

2.3.5?

Ok im getting a used phone that is stocked never been rooted and ill update to 2.3.5. What is best stable rom with battery life and OC after i odin and corn kk_4 v705 and do i need BL drs or not necessary?
Many ROMs are stable. Best ROM is the one you like most.
For people with no experience with Captivate I always recommend this Guide. It shows step-by-step how to update the OS from GB to CM10.x stable. CyanogenMod is the most popular ROM, CM10.1.3 Stable is JB 4.2.2 based, CM10.2 Stable is JB 4.3.1 based. Don't flash beta or experimental ROMs as your first custom ROM. Read the guide VERY carefully and try to understand what you are doing.
Ive had Cappy back in the day with Heimdall days and 2.2 lol. Im getting a used Cappy this week it will be 2.1. Yes i already have latest stable 10 and gapps downloaded and ready and wanted to know if i can use the s3 touch wiz after all is said and done? Sec launcher signed or unsigned? Can i use neat kernel on this or what do you recommend for OC`ing?
- You can't upgrade to CM10.x starting from Eclair, read the Guide.
- You can get TouchWiz style theme and/or TouchWiz launcher, whatever you like.
- Be careful what kernel/version you are looking at, different kernels are for different Android versions.
- I wouldn't recommend OC over 1.2GHz. Default CM kernel supports step OC to 1.2GHz.
- Careful with CM10.2 Android 4.3.1 based, kernel change may break the ROM.
I see you are in a hurry to transform your Captivate to something awesome, but please read more and understand what you are doing. All the information needed is already here on XDA. Use Search and you'll fund what you are looking for. Upgrading from 2.1 to 2.3.x includes bootloaders flash and a risk to brick your device. I recommend you to use KIES for this process, follow the instructions closely.
I meant after ive done the kies and 2.3.5
OK
- you can use whatever you want launcher with CM10.x
- Neat kernel is for different Android version (4.4.x), don't flash it
- for CM10.2 my recommendation is to use default CM kernel
hello, mine is CM10.1.3 but I was able to use the JB 4.3 but its running real slow. do I need to update it for something?
Wolgast1 said:
hello, mine is CM10.1.3 but I was able to use the JB 4.3 but its running real slow. do I need to update it for something?
Click to expand...
Click to collapse
CM11 Android 4.4.2 based nightly builds are quite stable. Some features are still missing, but coming back soon. I'm currently running latest 20131215 and I have no issues whatsoever. In my opinion, CM11 runs better than CM10.2 and uses less RAM. Leave ART alone for now, it's in experimental stage and more potent hardware is needed to show real advantages; use default Dalvik VM.
Keep in mind, that once the phone is repartitioned to run CM10.2/CM11 there is no easy way to go back to CM10.1. You'll need to go back to stock GB, flash Corn kernel, flash CM10.1 to repartition, flash CM10.1 again to install the ROM.
thank you! but can I directly update it to CM11? since Im running CM 10.1 or do I first need to update it to CM10.2?
Wolgast1 said:
thank you! but can I directly update it to CM11? since Im running CM 10.1 or do I first need to update it to CM10.2?
Click to expand...
Click to collapse
Follow the instructions:
http://forum.xda-developers.com/showthread.php?t=2557481
once you get a custom recovery on the phone, then it becomes a much easier process. I only really found trying to unlock the phone as the main difficult item.

Categories

Resources