Related
Was running icecoldsandwich but decided to go back to stock
Downloaded ruu vivo .exe and flashed but now stuck on white htc screen
Cant get into recovery anymore as when i click on it just takes me to a picture of a phone with red triangle and exclamation mark
I put the rom.zip file and renamed to PG32IMG and flashed via fastboot but still stuck on white screen.
Been searching for fix for 5 hours but dont know what to do. Need phone for work tomorrow what a mess !!
Any help really really appreciated
If you unlocked using htcdev.com you still have to flash the boot.img manually, otherways it will be stuck at white screen with HTC in green letters.
MrSenne said:
If you unlocked using htcdev.com you still have to flash the boot.img manually, otherways it will be stuck at white screen with HTC in green letters.
Click to expand...
Click to collapse
Can you please expand mate? i flashed via the ruu vivo .exe file
How did you unlock your phone? By Revolutionary or trough the www.htcdev.com way?
MrSenne said:
How did you unlock your phone? By Revolutionary or trough the www.htcdev.com way?
Click to expand...
Click to collapse
revolutionary
So you have S-OFF?
MrSenne said:
So you have S-OFF?
Click to expand...
Click to collapse
yes mate s off
Rerun the ruu.exe, but while you're still in the setup, find the rom.zip somewhere in your Temp folder on your computer.
Rename to PG32IMG.zip and put at the root of your SD card.
Now reboot in bootloader.
Maybe this works but I'm not sure, and don't blame me if something goes wrong, because I'm still new here.
MrSenne said:
Rerun the ruu.exe, but while you're still in the setup, find the rom.zip somewhere in your Temp folder on your computer.
Rename to PG32IMG.zip and put at the root of your SD card.
Now reboot in bootloader.
Maybe this works but I'm not sure, and don't blame me if something goes wrong, because I'm still new here.
Click to expand...
Click to collapse
Already tried that , as i said in my first post but thanks tho
fishytale said:
Was running icecoldsandwich but decided to go back to stock
Downloaded ruu vivo .exe and flashed but now stuck on white htc screen
Cant get into recovery anymore as when i click on it just takes me to a picture of a phone with red triangle and exclamation mark
I put the rom.zip file and renamed to PG32IMG and flashed via fastboot but still stuck on white screen.
Been searching for fix for 5 hours but dont know what to do. Need phone for work tomorrow what a mess !!
Any help really really appreciated
Click to expand...
Click to collapse
OK, since you are S-OFF using Revolutionary, you will not be able to install the latest Sense 3.0 RUU because Revolutionary is preventing the RUU from overwriting its HBOOT with the locked HBOOT 2.00. The reason you are getting stuck on the white screen is because the Sense 3.0 RUU requires the locked HBOOT 2.00 be present.
Look in the Development section This is a stock, rooted ROM based on the Sense 3.0 RUU that you can flash since you are S-OFF. First you will need to reinstall ClockworkMod recovery and then you can flash the stocked, rooted ROM or any custom ROM.
If you really want to return to stock using the Sense 3.0, then you need to search this forum for the way to return to S-ON and then you can flash the RUU.
Hope this helps.
tpbklake said:
OK, since you are S-OFF using Revolutionary, you will not be able to install the latest Sense 3.0 RUU because Revolutionary is preventing the RUU from overwriting its HBOOT with the locked HBOOT 2.00. The reason you are getting stuck on the white screen is because the Sense 3.0 RUU requires the locked HBOOT 2.00 be present.
Look in the Development section This is a stock, rooted ROM based on the Sense 3.0 RUU that you can flash since you are S-OFF. First you will need to reinstall ClockworkMod recovery and then you can flash the stocked, rooted ROM or any custom ROM.
If you really want to return to stock using the Sense 3.0, then you need to search this forum for the way to return to S-ON and then you can flash the RUU.
Hope this helps.
Click to expand...
Click to collapse
great help thanks as thought I may somehow
Managed to mess up partitions
can't use USB as get a malfunction message when plug into pc
what will be best way to re install clockwork mod?
Extract the ROM and flash the boot.img using adb.
Amar-S said:
Extract the ROM and flash the boot.img using adb.
Click to expand...
Click to collapse
Can't connect via usb. can I flash via fastboot or any other way than usb?
Amar-S said:
Extract the ROM and flash the boot.img using adb.
Click to expand...
Click to collapse
Please read the OP again. He has attempted to flash an official HTC RUU, not a custom ROM. The boot.img is not the issue, it is a HBOOT issue!
---------- Post added at 09:47 AM ---------- Previous post was at 09:42 AM ----------
fishytale said:
great help thanks as thought I may somehow
Managed to mess up partitions
can't use USB as get a malfunction message when plug into pc
what will be best way to re install clockwork mod?
Click to expand...
Click to collapse
fishytale said:
Can't connect via usb. can I flash via fastboot or any other way than usb?
Click to expand...
Click to collapse
OK, if you can't connect with USB then FASTBOOT USB mode isn't an option. You need to create a PG32IMG.zip with the CWM recovery.img file in it, copy it to your SD card and flash it from HBOOT mode.
tpbklake said:
Please read the OP again. He has attempted to flash an official HTC RUU, not a custom ROM. The boot.img is not the issue, it is a HBOOT issue!
---------- Post added at 09:47 AM ---------- Previous post was at 09:42 AM ----------
OK, if you can't connect with USB then FASTBOOT USB mode isn't an option. You need to create a PG32IMG.zip with the CWM recovery.img file in it, copy it to your SD card and flash it from HBOOT mode.
Click to expand...
Click to collapse
Here is a PG32IMG.zip file that contains CWM 5.0.2 that you can copy to your SD card and flash from HBOOT.
fishytale said:
great help thanks as thought I may somehow
Managed to mess up partitions
can't use USB as get a malfunction message when plug into pc
what will be best way to re install clockwork mod?
Click to expand...
Click to collapse
Double post. Please ignore.
tpbklake said:
Here is a PG32IMG.zip file that contains CWM 5.0.2 that you can copy to your SD card and flash from HBOOT.
Click to expand...
Click to collapse
Class mate will update when I get home from work
Please read the OP again. He has attempted to flash an official HTC RUU, not a custom ROM. The boot.img is not the issue, it is a HBOOT issue!
Click to expand...
Click to collapse
I am telling this from my experience , None other worked for me.
flash the boot.img and it will work.
Amar-S said:
I am telling this from my experience , None other worked for me.
flash the boot.img and it will work.
Click to expand...
Click to collapse
This will not work with the official Sense 3.0 RUU/ROM that he is using!!!! You can flash that boot.img all you want, but if you do not have HBOOT 2.00 installed on the phone, this ROM and boot.img will not work! It will bootloop on the white screen.
That boot.img requires that HBOOT 2.00 be installed because it uses a new /LIB partition to be mounted and HBOOT 2.00 is the only one that supports it.
tpbklake said:
This will not work with the official Sense 3.0 RUU/ROM that he is using!!!! You can flash that boot.img all you want, but if you do not have HBOOT 2.00 installed on the phone, this ROM and boot.img will not work! It will bootloop on the white screen.
That boot.img requires that HBOOT 2.00 be installed because it uses a new /LIB partition to be mounted and HBOOT 2.00 is the only one that supports it.
Click to expand...
Click to collapse
Thank you very much all systems go again , panic over
Really do appreciate you taking the time to help
Today i got the ota rom from HTC but when i tried to install it it failed. I already know thats because i use a custom recovery and rooted th e phone. But i want to install the original kitkat how can i do that. I also read on xda that in order to go back i need to have s-off(i know have s-on) to install the new rom.zip but this is also impossible because in order to go back i need a ruu file.
Is there anyone who can tell me how to go back to stock and go original i dont need root privileges anymore.
Im from holland and i have unlocked m7 with vodafone sim.
Please help
baleno_467 said:
Today i got the ota rom from HTC but when i tried to install it it failed. I already know thats because i use a custom recovery and rooted th e phone. But i want to install the original kitkat how can i do that. I also read on xda that in order to go back i need to have s-off(i know have s-on) to install the new rom.zip but this is also impossible because in order to go back i need a ruu file.
Is there anyone who can tell me how to go back to stock and go original i dont need root privileges anymore.
Im from holland and i have unlocked m7 with vodafone sim.
Please help
Click to expand...
Click to collapse
post the output of ''fastboot getvar all'' (without your IMEI and SN)
baleno_467 said:
Today i got the ota rom from HTC but when i tried to install it it failed. I already know thats because i use a custom recovery and rooted th e phone. But i want to install the original kitkat how can i do that. I also read on xda that in order to go back i need to have s-off(i know have s-on) to install the new rom.zip but this is also impossible because in order to go back i need a ruu file.
Is there anyone who can tell me how to go back to stock and go original i dont need root privileges anymore.
Im from holland and i have unlocked m7 with vodafone sim.
Please help
Click to expand...
Click to collapse
Okay, custom recovery, rooted. Custom ROM? You didn't say. In any event, you will need to flash stock recovery and unroot. I think both can be done with AIO Tools. Then you can update. If on custom ROM, S-Off, flash stock recovery, downgrade HBoot, and RUU.
hack14u said:
Okay, custom recovery, rooted. Custom ROM? You didn't say. In any event, you will need to flash stock recovery and unroot. I think both can be done with AIO Tools. Then you can update. If on custom ROM, S-Off, flash stock recovery, downgrade HBoot, and RUU.
Click to expand...
Click to collapse
I dont have custom rom i only rooted the phone for the gamkiller app. On the other hand i always tought that s-off is not okay because Its possible to damage your phone.
A few years ago i had the htc hd2 and when i wanted to go back to stock i just installed the original ruu from pc and it flashed it to the phone isnt that possible anymore?
So now the specs of my phone..
UNLOCKED
M7_UL PVT SHIP S-ON RH
HBOOT 1.55.0000
RADIO-4A.21.3263.04
OPENDSP-V32.120.274.0909
OS-3.62.401.1
EMMC-boot 2048MB
OCT 17 2013,23:06:14.0
Android version 4.3
Htc sense 5.5
Software 3.62.401.1
Htc sdk api 5.65
Kernel 3.4.10-gfa33c1e
[email protected]#1
Smp preempt
Smalband 4a.21.3263.04_10.38m.1157.04L
Build nummer 3.62.401.1 cl264544 release keys
Browserversion webkit/534.30
I hope this is enough info on my phone
I already have the OTA update its a zip file, is it possible to unzip the file and install it in recovery mode from CWM.Because if i install from zip with CWM it stops installing...
baleno_467 said:
I already have the OTA update its a zip file, is it possible to unzip the file and install it in recovery mode from CWM.Because if i install from zip with CWM it stops installing...
Click to expand...
Click to collapse
Flash this stock recovery, redownload the ota and install
http://d-h.st/to7
mb_guy said:
Flash this stock recovery, redownload the ota and install
http://d-h.st/to7
Click to expand...
Click to collapse
the file came with an installer program for downloading the exact file youre talking about so because of the installer program i cant download it.
I also looked for firewater s-off but when i download firewater its only a file not an .exe or .zip what should this extension be and how does it work because if i read the tutorial about this it doesnt say how to run the program for example in windows or in CMD mode or maybe CWM.
Please help
baleno_467 said:
the file came with an installer program for downloading the exact file youre talking about so because of the installer program i cant download it.
I also looked for firewater s-off but when i download firewater its only a file not an .exe or .zip what should this extension be and how does it work because if i read the tutorial about this it doesnt say how to run the program for example in windows or in CMD mode or maybe CWM.
Please help
Click to expand...
Click to collapse
You are probably using the wrong download button. It is a very confusing page, full of links
baleno_467 said:
the file came with an installer program for downloading the exact file youre talking about so because of the installer program i cant download it.
I also looked for firewater s-off but when i download firewater its only a file not an .exe or .zip what should this extension be and how does it work because if i read the tutorial about this it doesnt say how to run the program for example in windows or in CMD mode or maybe CWM.
Please help
Click to expand...
Click to collapse
you clicked the wrong download button
you want the recovery.img
then you flash it with fastboot
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
forget about s-off just get your phone working
best option is to just RUU to kitkat 4.4.2
http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
clsA said:
you clicked the wrong download button
you want the recovery.img
then you flash it with fastboot
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
forget about s-off just get your phone working
best option is to just RUU to kitkat 4.4.2
http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
Click to expand...
Click to collapse
So if a use this exe it will return my Phone back to full stock locked and everything Original or is there a change that i brick my device, because i dont have S-off.
baleno_467 said:
So if a use this exe it will return my Phone back to full stock locked and everything Original or is there a change that i brick my device, because i dont have S-off.
Click to expand...
Click to collapse
it's a signed HTC Rom update utility ...nothing will happen to your phone
Its simple
http://forum.xda-developers.com/showthread.php?t=2691787
I unlocked boot loader, rooted, installed TWRP recovery and superSU. My phone is Vodafone UK with 4.4.2 running but the the new update ruined my phone with some very serious and annoying bugs. Can I flash this stock rom intended for PN0710000 without changing my MID of Vodafone? Please help !
It doesnt work it starts with the program to update but within the minute it stops....Proberply because i have CWM recovery in the boot and not the Original HTC recovery and finaly because i dont have s-Off
edit I now have s-off 02:16 AM
I have did it, the S-OFF is a must and now i completely stocked my htc one. Everything works perfect also the over the air (ota) update works. Thanks to you all who made restore possible.:good:
I've been having some problems recently. I've been wanting to update to Kitkat but I have replaced the stock recovery software with CWM, and thus it doesn't work.
To solve this problem I've figured out that I need to get my claws on an RUU, which I have. Hopefully I've grabbed the right one. It doesn't seem like the RADIO serial-thingy matches though. Device has
Code:
4A.21
whilst the RUU has
Code:
4A.23
.
I've tried using the RUU in fastboot but later figured out that I need to have S-OFF for that. That is currently not the case. I've tried using both Firewater and Rumrunner. According to the instructions I'm required to have the phone on in the usual way. As in, not in the bootloader. The problem is that my phone is stuck in some restart loop. When reaching the PIN-screen it will automatically restart/crash after a few seconds. I can however use the phone as usual during this time. Sometimes, it alerts me with an error.
It also seems like the battery completely empties itself sometimes. This is when trying to restore it, getting in and out from the bootloader and the like.
Here's some software info:
CID: HTC__Y13
MIDN0710000
Bootloader info:
Code:
M7_UL PBT SHIP S-ON RH
Code:
HBOOT-1.55.0000
Code:
RADIO-4A.21.3263.04
Code:
OpenDSP-v32.120.274.0909
Code:
OS-3.62.401.1
Great thanks in advance and pardon my useless formatting (and my lacking knowledge of this forum as there might be some rules I'm not following), I'm damn tired of this device.
Tmplt said:
I've been having some problems recently. I've been wanting to update to Kitkat but I have replaced the stock recovery software with CWM, and thus it doesn't work.
To solve this problem I've figured out that I need to get my claws on an RUU, which I have. Hopefully I've grabbed the right one. It doesn't seem like the RADIO serial-thingy matches though. Device has
Code:
4A.21
whilst the RUU has
Code:
4A.23
.
I've tried using the RUU in fastboot but later figured out that I need to have S-OFF for that. That is currently not the case. I've tried using both Firewater and Rumrunner. According to the instructions I'm required to have the phone on in the usual way. As in, not in the bootloader. The problem is that my phone is stuck in some restart loop. When reaching the PIN-screen it will automatically restart/crash after a few seconds. I can however use the phone as usual during this time. Sometimes, it alerts me with an error.
It also seems like the battery completely empties itself sometimes. This is when trying to restore it, getting in and out from the bootloader and the like.
Here's some software info:
CID: HTC__Y13
MIDN0710000
Bootloader info:
Code:
M7_UL PBT SHIP S-ON RH
Code:
HBOOT-1.55.0000
Code:
RADIO-4A.21.3263.04
Code:
OpenDSP-v32.120.274.0909
Code:
OS-3.62.401.1
Great thanks in advance and pardon my useless formatting (and my lacking knowledge of this forum as there might be some rules I'm not following), I'm damn tired of this device.
Click to expand...
Click to collapse
If the RUU is an .exe file, then try placing it in the same folder as your ADB/FASTBOOT files. Plug-in your phone to your PC so that it is recognized on the PC then double click the RUU.exe file. Follow the on-screen instructions. You don't need S-OFF to run an RUU for your phone with the correct CID & MID providing the RUU is the same version or higher.
majmoz said:
If the RUU is an .exe file, then try placing it in the same folder as your ADB/FASTBOOT files. Plug-in your phone to your PC so that it is recognized on the PC then double click the RUU.exe file. Follow the on-screen instructions. You don't need S-OFF to run an RUU for your phone with the correct CID & MID providing the RUU is the same version or higher.
Click to expand...
Click to collapse
sigh... How could I be so dense? I should know this. Thanks for the quick response. I will try this at once.
majmoz said:
If the RUU is an .exe file, then try placing it in the same folder as your ADB/FASTBOOT files. Plug-in your phone to your PC so that it is recognized on the PC then double click the RUU.exe file. Follow the on-screen instructions. You don't need S-OFF to run an RUU for your phone with the correct CID & MID providing the RUU is the same version or higher.
Click to expand...
Click to collapse
The RUU crashes when launching it, "InstallScript Setup Launcher has stopped working". I'm quite sure I have the required stuff to run it. Running it as admin didn't help.
Tmplt said:
The RUU crashes when launching it, "InstallScript Setup Launcher has stopped working". I'm quite sure I have the required stuff to run it. Running it as admin didn't help.
Click to expand...
Click to collapse
It looks like a PC issue. Check out this post Installscript setup launcher has stopped working! In the reply they list two methods it looks like you did the first one. Sometimes, I just have to reboot the computer to get everything set correctly.
majmoz said:
It looks like a PC issue. Check out this post ** In the reply they list two methods it looks like you did the first one. Sometimes, I just have to reboot the computer to get everything set correctly.
Click to expand...
Click to collapse
Unfortunately, none of these methods helps. The device is supposed to be in Fastboot USB mode when the RUU is launched, yes?
Tmplt said:
Unfortunately, none of these methods helps. The device is supposed to be in Fastboot USB mode when the RUU is launched, yes?
Click to expand...
Click to collapse
what is the ruu version you are trying to use (complete file name)?
easiest way: download this guru reset file, its exactly the same version you have on your phone now.
http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
put TWRP 2.6.3.3 (recommended) recovery on your phone
copy the zip to your SDcard
Enter recovery and flash like you would do with a custom rom
in the Aroma installer, select wipe data, install stock recovery, install stock radio when prompted.
This file will put you back to fully stock.
Help also
Hi, I'm a newbie and I was supposed to post a thread regarding a problem I'm facing similar to this. So if it's alright, I'll post it here also and ask for your advice. I recently unlocked my HTC One w/ 4.4.2 amd Sense 6.0 a few days ago and was also able to flash CWM custom recovery and root it. I then tried flashing the latest Android Revolution HD, when I rebooted the phone after intallation, it just stays on the first spash screen. I forgot that I needed to S-off my device. So now, I can only access the bootloader and recovery. The status of my device currently is *Tampered*, Unlocked and S-On with 1.57 Hboot. Also, I can't copy files from my PC to the device. I don't know what to do. I've been reading around but I think I need some concrete advice. Thank you in advance.
Baconnugget said:
Hi, I'm a newbie and I was supposed to post a thread regarding a problem I'm facing similar to this. So if it's alright, I'll post it here also and ask for your advice. I recently unlocked my HTC One w/ 4.4.2 amd Sense 6.0 a few days ago and was also able to flash CWM custom recovery and root it. I then tried flashing the latest Android Revolution HD, when I rebooted the phone after intallation, it just stays on the first spash screen. I forgot that I needed to S-off my device. So now, I can only access the bootloader and recovery. The status of my device currently is *Tampered*, Unlocked and S-On with 1.57 Hboot. Also, I can't copy files from my PC to the device. I don't know what to do. I've been reading around but I think I need some concrete advice. Thank you in advance.
Click to expand...
Click to collapse
Best to start your own thread, but on a quick fix, your problem is CWM, you need to use TWRP recovery to flash that rom, also recommend 2.6.3.3
Tampered and unlocked is normal, nothing to worry about, and you don't need s-off to flash custom rom's, just an unlocked bootloader
alray said:
what is the ruu version you are trying to use (complete file name)?
Click to expand...
Click to collapse
Bugger, I have it renamed to RUU.exe and it's md5 doesn't match any file from the site I remember I downloaded it from. I am, however, currently downloading
Code:
RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2.exe
CID and MID matches, but I didn't buy it in the UK. It was bought in Europe.
Seanie280672 said:
Best to start your own thread, but on a quick fix, your problem is CWM, you need to use TWRP recovery to flash that rom, also recommend 2.6.3.3
Tampered and unlocked is normal, nothing to worry about, and you don't need s-off to flash custom rom's, just an unlocked bootloader
Click to expand...
Click to collapse
Thank you, I appreciate your advice. I tried flashing TWRP recovery but when I go into TWRP recovery, my touchscreen doesn't respond. Any thoughts on why? It works when I'm on CWM though.
Tmplt said:
Bugger, I have it renamed to RUU.exe and it's md5 doesn't match any file from the site I remember I downloaded it from. I am, however, currently downloading
Code:
RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2.exe
CID and MID matches, but I didn't buy it in the UK. It was bought in Europe.
Click to expand...
Click to collapse
Did you name that file yourself, that's the wrong file, that one is O2 "206", hence 4.20.206.16 you need 401, 3.62.401.1 which is WWE, the same number under your os information in your first post and the same as the guru reset I linked.
Tmplt said:
Bugger, I have it renamed to RUU.exe and it's md5 doesn't match any file from the site I remember I downloaded it from. I am, however, currently downloading
Code:
RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2.exe
CID and MID matches, but I didn't buy it in the UK. It was bought in Europe.
Click to expand...
Click to collapse
download this file: http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
this is a reset rom
flash it from twrp 2.6.3.3 or from cwm recovery
select to restore stock radio and stock recovery
then you'll be fine to take ota updates.
the file you are currently downloading isnt for your phone.
edit:
well @Seanie280672 already suggested you to do this (just saw his previous post)
will be the easiest and fastest solution in your case.
Seanie280672 said:
easiest way: download this guru reset file, its exactly the same version you have on your phone now.
**
put TWRP 2.6.3.3 (recommended) recovery on your phone
copy the zip to your SDcard
Enter recovery and flash like you would do with a custom rom
in the Aroma installer, select wipe data, install stock recovery, install stock radio when prompted.
This file will put you back to fully stock.
Click to expand...
Click to collapse
TWRP 2.6.3.3 has been flashed and I'm currently downloading the .zip file. Is there a way to put the archive on the device staying in TWRP/Fastboot?
Tmplt said:
TWRP 2.6.3.3 has been flashed and I'm currently downloading the .zip file. Is there a way to put the archive on the device staying in TWRP/Fastboot?
Click to expand...
Click to collapse
with your phone booted in twrp main menu, and the rom.zip in the same folder of adb.exe and fasboot.exe:
Code:
adb push guru_reset_m7_3.62.401.1.zip /sdcard/
wait for the file to transfer (5-10 min) (there is no progress bar just wait adb to tell you the file transfer is complete)
then in twrp hit "install" and then choose guru_reset_m7_3.62.401.1.zip
alray said:
with your phone booted in twrp main menu, and the rom.zip in the same folder of adb.exe and fasboot.exe:
Code:
adb push guru_reset_m7_3.62.401.1.zip /sdcard/
wait for the file to transfer (5-10 min) (there is no progress bar just wait adb to tell you the file transfer is complete)
then in twrp hit "install" and then choose guru_reset_m7_3.62.401.1.zip
Click to expand...
Click to collapse
Thanks!
On an unrelated side-note; if I "thank" someone in the forum, does that count as an upvote or a complete fix regarding my problem (like StackOverflow works)?
Tmplt said:
if I "thank" someone in the forum, does that count as an upvote or a complete fix regarding my problem (like StackOverflow works)?
Click to expand...
Click to collapse
no, hitting the "thank" button doesn't count as an upvote like on other forum. This is only to say thank you to a person who helped you.
Seanie280672 said:
easiest way: download this guru reset file, its exactly the same version you have on your phone now.
**
put TWRP 2.6.3.3 (recommended) recovery on your phone
copy the zip to your SDcard
Enter recovery and flash like you would do with a custom rom
in the Aroma installer, select wipe data, install stock recovery, install stock radio when prompted.
This file will put you back to fully stock.
Click to expand...
Click to collapse
alray said:
download this file: **
this is a reset rom
flash it from twrp 2.6.3.3 or from cwm recovery
select to restore stock radio and stock recovery
then you'll be fine to take ota updates.
the file you are currently downloading isnt for your phone.
edit:
well @Seanie280672 already suggested you to do this (just saw his previous post)
will be the easiest and fastest solution in your case.
Click to expand...
Click to collapse
alray said:
with your phone booted in twrp main menu, and the rom.zip in the same folder of adb.exe and fasboot.exe:
Code:
adb push guru_reset_m7_3.62.401.1.zip /sdcard/
wait for the file to transfer (5-10 min) (there is no progress bar just wait adb to tell you the file transfer is complete)
then in twrp hit "install" and then choose guru_reset_m7_3.62.401.1.zip
Click to expand...
Click to collapse
The ROM was successfully installed and I'm currently configuring my phone! The phone did not implode when restarting, something I take as a sign of a functional phone! A truckload of thanks for the both of ya!
My friend's phone is stuck in bootloop and I believe it's soft bricked.
It's a stock brand new HTC One M7.
It was updating one day and he said it might have got corrupted because it just shut down and when it booted back up it was stuck at the HTC Screen and wouldn't do anything.
Over the last week I have been trying to unbrick it.
It's LOCKED and S-ON Sprint HTC One M7.
I did a factory reset, wiped cache, dalvic cache, reboot. I tried putting in fastboot and flashing RUU on it but it kept failing because the RUU I had was a lower version of the image than the current one on the phone and I read online that I can only flash backwards if it's S-OFF.
Any help?
Thanks!
technocrat7 said:
My friend's phone is stuck in bootloop and I believe it's soft bricked.
It's a stock brand new HTC One M7.
It was updating one day and he said it might have got corrupted because it just shut down and when it booted back up it was stuck at the HTC Screen and wouldn't do anything.
Over the last week I have been trying to unbrick it.
It's LOCKED and S-ON Sprint HTC One M7.
I did a factory reset, wiped cache, dalvic cache, reboot. I tried putting in fastboot and flashing RUU on it but it kept failing because the RUU I had was a lower version of the image than the current one on the phone and I read online that I can only flash backwards if it's S-OFF.
Any help?
Thanks!
Click to expand...
Click to collapse
if the phone is new (never tampered with) and still under warranty, send it back for repair or replacement
s-off and run the ruu
unlock bootloader, flash a custom recovery and flash a rom or a nandroid backup
post in the sprint htc one forum for more detailed info
So the first step is S-OFF because I don't think k the warranty is on it.
And then custom recovery and what was the part with a custom nandroid backup? Can I run someone else's nandroid?
And if I put S-OFF on it, I can flash an older version of RUU right?
Sent from my HTC One_M8 using XDA Free mobile app
I'm pretty sure that in order to S-off you will need to be booted up first? The good news is that you can flash the full factory RUU with a s-on boot loader locked device so you may need to figure out how to do that first. Do you have an adb/fastboot environment set up? If so you are practically there. On a side note, I have seen no less than 3 m7s fail and softbrick on the first attempt at applying an ota, but it was always after S-off and a conversion to fully stock gpe (these were gsm models). I figured it was just because of the mods but who knows. Anyway, if you can locate and install a fully stock sprint RUU you should be back to where you were before the ota at which point you can proceed with whatever else you want to do.
technocrat7 said:
So the first step is S-OFF because I don't think k the warranty is on it.
And then custom recovery and what was the part with a custom nandroid backup? Can I run someone else's nandroid?
And if I put S-OFF on it, I can flash an older version of RUU right?
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
sorry for the confusion, this was not steps to follow (1-2-3-4) but either 1 or 2 or 3 or 4
if you go for option 2, yes you can flash older ruu.
for option 3, yes you can flash someone else nandroid, but it must be for your phone variant (sprint) and the ideal nandroid backup should be the same OS version.
---------- Post added at 02:34 PM ---------- Previous post was at 02:29 PM ----------
dougeedug said:
I'm pretty sure that in order to S-off you will need to be booted up first?
Click to expand...
Click to collapse
Right, you need a booted rom to s-off. (at least for the M7_UL dont know for the srpint variant)
The good news is that you can flash the full factory RUU with a s-on boot loader locked device so you may need to figure out how to do that first.
Click to expand...
Click to collapse
Not exactly, you can only flash ruu with a s-on device (and locked/relocked bootloader) if the ruu is same of higher version. In that case the OP need to find another ruu (if any available)
Yeah, I have a 4.2 image when loading RUU, therefore I'm not able to use an RUU.
So what else do I need to do?
And I do have an adb and fastboot environment set up, yes.
Should I instead just S-OFF It, put a custom bootloader on it and then flash a custom recovery?
Yes if you can achieve s-off you can put any RUU you want on it and that will rule out software issues.
Okay so I unlocked it.
However I looked online how to do S-OFF and all the articles I found said the phone has to be on an functional to enable USB debugging mode and to run the appropriate programs to make it S-OFF.
Is there any other way to do it?
Now that you are bootloader unlocked, flash a custom recovery and from there a rom. That should get you back to life so you can proceed however you wish.
I have a custom recovery.
TWRP 2.6.0.0 or something. And I loaded into it and my phone got stuck and the touch wouldn't work. It says "slide to unlock" and sliding doesn't work.
What do I do now? I can't even reboot the light keeps flashing and I even tried under a bright light and still nothing.
I'm letting the battery die to restart. When u do restart it, what do I do about the bad bootloader? Can I just put another one on there? I want Philz now after that terrible experience.
technocrat7 said:
I have a custom recovery.
TWRP 2.6.0.0 or something. .
Click to expand...
Click to collapse
This is very alarming! Be double sure you are flashing exactly what you need. The CWM you would need is 6.0.4.8 found on this page. I'm not sure what TWRP version is suitable as I don't use it. I don't dislike it. I have used it and it has worked.
Can I just do the same thing I did before to install a custom recovery?
Will it override the one I have currently?
Thanks!
technocrat7 said:
Can I just do the same thing I did before to install a custom recovery?
Will it override the one I have currently?
Thanks!
Click to expand...
Click to collapse
We will have to see what it does after you let it die. The way your phone is acting is not good. Unfortunately, we must keep in mind that it may be a hardware fault causing all of this from the start. If it will still charge offline, then you'll get a chance to see if you can power it up into the bootloader and get fastbootUSB.
technocrat7 said:
Can I just do the same thing I did before to install a custom recovery?
Will it override the one I have currently?
Thanks!
Click to expand...
Click to collapse
why are you waiting for it to die ? if you want to get out of recovery and tough isn't working, just hold down the power button and the volume down until the lights on the bottom flash 10 to 15 times, when it goes off, release the power button but continue to hold the volume down, you are now in the bootloader, or should be.
and yes, if you flash another recovery it will overwrite the one that's on there, unfortunately, most rom's require TWRP
---------- Post added at 03:28 AM ---------- Previous post was at 03:22 AM ----------
I also just noticed you have the Sprint M7, you cant use the normal recoveries or rom's, they wont work, you need to use the ones built for your phone, which is different to the normal gsm version.
I would try twrp 2.6.3.3 or this http://mdmower.cmphys.com/twrp-m7spr/ a newer custom compiled twrp so your os version dont get wiped on bootloader.
Dang, being with Sprint complicates things?
So will that one be safe to put on my phone? And that means I can't get Philz huh?
technocrat7 said:
Dang, being with Sprint complicates things?
So will that one be safe to put on my phone? And that means I can't get Philz huh?
Click to expand...
Click to collapse
No it doesn't complicate things, it's the same procedure, it's like with anything, you just have to make sure you get the right files. Your phone is cdma not gsm.
---------- Post added at 04:28 AM ---------- Previous post was at 04:17 AM ----------
http://forum.xda-developers.com/sprint-htc-one?nocache=1&z=1858146956656128
You can find all of those right files there
Okay thank you!
It is unlocked, rooted and had a custom recovery on it!
Now the last thing I need help with is, getting S-OFF because I still can't boot up the phone.
So now I just need to get S-OFF and then flash a custom ROM image on there and flash a custom image on it or something.
All I see when it boots up is the HTC screen.
technocrat7 said:
Okay thank you!
It is unlocked, rooted and had a custom recovery on it!
Now the last thing I need help with is, getting S-OFF because I still can't boot up the phone.
So now I just need to get S-OFF and then flash a custom ROM image on there and flash a custom image on it or something.
All I see when it boots up is the HTC screen.
Click to expand...
Click to collapse
You need a working Rom on it to go s-off, all s-off tools are run from an android booted phone, so download a Rom of your choice, in your case a sense Rom, make sure you get it from the link I supplied earlier for your particular phone, move it to the same folder where your adb and fastboot are on your computer, boot your phone into recovery (main screen only, no sub menus) and plug it into your computer, the type
adb push NAME_OF_ROM.zip /sdcard/
Takes a while so be patient, the command window will let you know when it's done.
Unplug your phone and in recovery select install, select your Rom from the list and follow the instructions
Seanie280672 said:
You need a working Rom on it to go s-off, all s-off tools are run from an android booted phone, so download a Rom of your choice, in your case a sense Rom, make sure you get it from the link I supplied earlier for your particular phone, move it to the same folder where your adb and fastboot are on your computer, boot your phone into recovery (main screen only, no sub menus) and plug it into your computer, the type
adb push NAME_OF_ROM.zip /sdcard/
Takes a while so be patient, the command window will let you know when it's done.
Unplug your phone and in recovery select install, select your Rom from the list and follow the instructions
Click to expand...
Click to collapse
So there's a slight problem.
"ADB Devices" doesn't show anything, it says "Devices not found"
The reason I would say is because it does not have USB Debugging enabled.
And I can't get into the phone to enable it because i'm not at that point yet.
Is there anything else I can do besides "adb push" to get the file on there?
Fastboot stuff works fine.
I went to the link you provided and found CynogenMod 11 I wanted to put on there.
After looking inside of the ZIP I downloaded there's a .img file inside called "boot.img" can I do anything with that?
Thanks!
I really messed my phone up its got no OS and its stuck in bootloop iv tried pushing cm-12 onto it and installing it but i keep getting error codes with what you see in the picture. can anyone help.
Burky1996 said:
I really messed my phone up its got no OS and its stuck in bootloop iv tried pushing cm-12 onto it and installing it but i keep getting error codes with what you see in the picture. can anyone help.
Click to expand...
Click to collapse
Try re download the zip (or try an other rom)maybe you just got an false download. i also had some trouble with my m7 back in the day.
But in your case now you are stuck with no os or bootloop, i give you as advice to follow an soft unbrick method it worked for me, or if you have an usb otg cable and usb or and usb otg thumbstick, put the rom on that usb and connect it to your phone and then try to flash it (if your using twrp you have an option to choose from wich storage you want to use)
Also a piece of advice, when flashing roms, kernels etc please have your phone charged above 50% (just in case).
Sent from my HUAWEI P7-L10 using XDA Free mobile app
---------- Post added at 09:28 PM ---------- Previous post was at 09:27 PM ----------
its the peanut said:
Try re download the zip (or try an other rom)maybe you just got an false download. i also had some trouble with my m7 back in the day.
But in your case now you are stuck with no os or bootloop, i give you as advice to follow an soft unbrick method it worked for me, or if you have an usb otg cable and usb or and usb otg thumbstick, put the rom on that usb and connect it to your phone and then try to flash it (if your using twrp you have an option to choose from wich storage you want to use)
Also a piece of advice, when flashing roms, kernels etc please have your phone charged above 50% (just in case).
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
Also make sure you downloaded the rom made for your phone model!
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Burky1996 said:
I really messed my phone up its got no OS and its stuck in bootloop iv tried pushing cm-12 onto it and installing it but i keep getting error codes with what you see in the picture. can anyone help.
Click to expand...
Click to collapse
Can you please post the output of
Code:
fastboot getvar all
please remove your imei and serial number.
Depending on which variant of the M7 you have you probably just need a different version of recovery to install a CM rom. I think they prefer TWRP 2.7.x.x. Post the getvar and we can see what you have. then I can give you a better informed instruction. :good:
P.s also check the md5 of the rom zip you downloaded. Use this tool www.winmd5.com the correct md5 should be listed with the link you downloaded the rom from
failed to mount /dev/block/blah blah blah = needs "block:by-name" support which twrp 2.6.3.3 doesn't have
everything explained here
So update your recovery
and do what danny said above so he can confirm you have the right rom/recovery for your device.
Burky1996 said:
I really messed my phone up its got no OS and its stuck in bootloop iv tried pushing cm-12 onto it and installing it but i keep getting error codes with what you see in the picture. can anyone help.
Click to expand...
Click to collapse
Your getvar looks fine this rom should work fine with your device. Download this version of TWRP https://www.androidfilehost.com/?fid=23501681358561860 (2.7.1.2). dropthe file in your fastboot folder and flash it with fastboot.
Code:
fastboot flash recovery "name-of-recovery".img
fastboot erase cache
fastboot reboot-bootloader
Once thats done reflash the rom with the new version of TWRP. It should flash just fine :good:
iv managed to flash cm12.1 now, thanks guys, is there anyway i could get the HTC software back on.
Burky1996 said:
iv managed to flash cm12.1 now, thanks guys, is there anyway i could get the HTC software back on.
Click to expand...
Click to collapse
There are a number of ways to return to stock software. You can simply flash a stock rom through twrp or use a stock nandroid. look for rom that match your version main. 7.19.401.22
I think there is even an lollipop 7.19.401.22 RUU for your device but I'm not sure if it will work with s-on though because it's a zip but it certainly wouldnt hurt to try it though. You will need to relock your bootloader and flash it with fastboot.
I'll edit this post with links when I find them unless some one beats me to it
Hey Dan do you think we could skype and you could talk me through it, it would be much easier?
Burky1996 said:
Hey Dan do you think we could skype and you could talk me through it, it would be much easier?
Click to expand...
Click to collapse
Sorry I am at work so availability is scetchy. I found the ruu but it's for the older 7.19.401.2 lollipop, this won't work for you because your s-on. Downgrading firmware is only possible with s-off.
You can use this stock rom though http://forum.xda-developers.com/htc-one/development/rom-100-pure-stock-5-0-2-7-19-401-2-t3044041 just flash it with twrp. The thread recommends TWRP 2.8.5.X no need to relock the bootloader or anything silly, just flash it like any other rom :good:
You'll notice that this rom is also for the older 7.19.401.2 so you will need to install the last OTA update to bring your rom in line with your firmware. Flash this recovery with the same method as twrp. (Stock recovery required for installing the OTA) http://sourceforge.net/projects/htcone/files/Recovery/STOCK/7.19.401.2_recovery.img/download reboot then just go to Settings>About>Check for updates.
Danny201281 said:
Sorry I am at work so availability is scetchy. I found the ruu but it's for the older 7.19.401.2 lollipop, this won't work for you because your s-on. Downgrading firmware is only possible with s-off.
You can use this stock rom though http://forum.xda-developers.com/htc-one/development/rom-100-pure-stock-5-0-2-7-19-401-2-t3044041 just flash it with twrp. The thread recommends TWRP 2.8.5.X no need to relock the bootloader or anything silly, just flash it like any other rom :good:
You'll notice that this rom is also for the older 7.19.401.2 so you will need to install the last OTA update to bring your rom in line with your firmware. Flash this recovery with the same method as twrp. (Stock recovery required for installing the OTA) http://sourceforge.net/projects/htcone/files/Recovery/STOCK/7.19.401.2_recovery.img/download reboot then just go to Settings>About>Check for updates.
Click to expand...
Click to collapse
i did what you said when i applied the system update my phone turned on booted to a white screen with the green htc logo then it turned off the battery symbol came up its like its turned off. i tryed to lock the boot loader to see if it would work then but it never, when i appy the update it dosent even boot into the recovery.
i did what you said when i applied the system update my phone turned on booted to a white screen with the green htc logo then it turned off the battery symbol came up its like its turned off. i tryed to lock the boot loader to see if it would work then but it never, when i appy the update it dosent even boot into the recovery.
Burky1996 said:
i did what you said when i applied the system update my phone turned on booted to a white screen with the green htc logo then it turned off the battery symbol came up its like its turned off. i tryed to lock the boot loader to see if it would work then but it never, when i appy the update it dosent even boot into the recovery.
Click to expand...
Click to collapse
Okay try this. Download the OTA but select the option "Install Later" connect your m7 to your pc and browse your storage. In the download folder on your phone you should find the OTA in zip format. Copy it to your pc.
Now open the OTA zip on your pc. Inside you'll find another zip called "firmware.zip" extract it then open it. Inside you'll find a recovery.img. extract the recovery file and flash it with fastboot. Now reboot to android and continue to install the OTA. :fingers-crossed:
Sent from my SM-T230 using Tapatalk
im going to have to unlock the boot loader again and then do it
Burky1996 said:
im going to have to unlock the boot loader again and then do it
Click to expand...
Click to collapse
Yes you will need to unlock the bootloader to flash the recovery, Dont forget to fastboot erase cache after flashing the recovery that is cruicial. You don't need to be relocked to install the OTA though.
When you select install now, the device should reboot to the Stock Recovery. At first the screen will just be black for a short while. Then you'll see an image of a phone with a Green ring and download arrow. If you hold Volume up and press the power button you will see the Stock Recovery and its progress in installing the OTA.
I'm not sure why your device was hanging on boot after installing the OTA. Maybe a bad recovery.img. that's why I say to get the recovery from the OTA file.
its still not working so i mite just install twrp and restore to cm12.1
Burky1996 said:
im going to have to unlock the boot loader again and then do it
Click to expand...
Click to collapse
Yes you will need to unlock the bootloader to flash the recovery, Dont forget to fastboot erase cache after flashing the recovery that is cruicial. You don't need to be relocked to install the OTA though.
When you select install now, the device should reboot to the Stock Recovery. At first the screen will just be black for a short while. Then you'll see an image of a phone with a Green ring and download arrow. If you hold Volume up and press the power button you will see the Stock Recovery and its progress in installing the OTA.
I'm not sure why your device was hanging on boot after installing the OTA. Maybe a bad recovery.img. that's why I say to get the recovery from the OTA file.
Danny201281 said:
Sorry I am at work so availability is scetchy. I found the ruu but it's for the older 7.19.401.2 lollipop, this won't work for you because your s-on. Downgrading firmware is only possible with s-off.
You can use this stock rom though http://forum.xda-developers.com/htc-one/development/rom-100-pure-stock-5-0-2-7-19-401-2-t3044041 just flash it with twrp. The thread recommends TWRP 2.8.5.X no need to relock the bootloader or anything silly, just flash it like any other rom :good:
You'll notice that this rom is also for the older 7.19.401.2 so you will need to install the last OTA update to bring your rom in line with your firmware. Flash this recovery with the same method as twrp. (Stock recovery required for installing the OTA) http://sourceforge.net/projects/htcone/files/Recovery/STOCK/7.19.401.2_recovery.img/download reboot then just go to Settings>About>Check for updates.
Click to expand...
Click to collapse
could it be not working coz my hboot has changed to 1.51.
Burky1996 said:
could it be not working coz my hboot has changed to 1.51.
Click to expand...
Click to collapse
Your still stuck with this? Try starting the process over, but do not relock your bootloader at any point.
Wipe system data and cache partitions with TWRP Advanced wipe
Flash the Rom with twrp as a clean install.
Reboot and download the OTA. Choose install later, then copy the OTA to your pc. Extract the Stock Recovery and flash it with fastboot. Reboot and install the OTA.
But do not relock your boot loader. Because when you unlock the bootloader, it wipes the device including the data/preload folder. If the preload folder is not intact the OTA will fail
Sent from my M7 Running ARHD 92.x