Related
I got my AT&T Moto X yesterday and rooted it on 4.2.2 with SlapMyMoto.
Upgraded to 4.4
Used AdAway
Upgraded to 4.4.2
Lost write permissions, write protection re-enabled
Don't want an edited hosts file that is stuck like that, can't revert permanently
Screwed?
Any ideas?
You lost write permission when you updated to 4.4.2
nhizzat said:
You lost write permission when you updated to 4.4.2
Click to expand...
Click to collapse
I know, but now I can't even restore to stock so I'm basically stuck on 4.4.2 with a modified hosts file and semi-root…
How can I go to stock? I don't care what version?
JacobLukeWood said:
I know, but now I can't even restore to stock so I'm basically stuck on 4.4.2 with a modified hosts file and semi-root…
How can I go to stock? I don't care what version?
Click to expand...
Click to collapse
because write protection became enabled, any changes you make to /system (like reverting to the stock hosts file) will be undone at power off/on. In other words, yes you are stuck with the modified hosts file.
To get back to 100% stock at this point would involve flashing stock system.img with mfastboot, or the entire rom using RSDLite, however this will mean you also lose what little root you retained, AND the 4.4.2 SBF hasn't leaked out yet for ATT so you'd have to wait. (if/when it does leak, it will surely appear on -> http://sbf.droid-developers.org/phone.php?device=0 )
KidJoe said:
because write protection became enabled, any changes you make to /system (like reverting to the stock hosts file) will be undone at power off/on. In other words, yes you are stuck with the modified hosts file.
To get back to 100% stock at this point would involve flashing stock system.img with mfastboot, or the entire rom using RSDLite, however this will mean you also lose what little root you retained, AND the 4.4.2 SBF hasn't leaked out yet for ATT so you'd have to wait. (if/when it does leak, it will surely appear on -> http://sbf.droid-developers.org/phone.php?device=0 )
Click to expand...
Click to collapse
Thanks KidJoe, I guess I'll just have to wait…
Also, when I try to go into recovery I get the following:
Partition (recovery) Security Version Downgraded
Boot up failed
Click to expand...
Click to collapse
Is there anything I can do about this?
JacobLukeWood said:
Thanks KidJoe, I guess I'll just have to wait…
Also, when I try to go into recovery I get the following:
Is there anything I can do about this?
Click to expand...
Click to collapse
Well, you've got miss-matched versions of files/partitions on your phone. You can TRY to flash the recovery.img from the T-Mobile 4.4.2 SBF, otherwise you'll have to wait until the ATT SBF leaks out.
BUT because of the state you are in... I would just sit tight and wait for the ATT 4.4.2 SBF, then use RSDLite to completely flash your phone and get everything, all parts, back to 100% stock.
Yes....do what Kid Joe suggests and wait. If you try the wrong thing now, you could very well brick.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
---------- Post added at 08:34 PM ---------- Previous post was at 08:33 PM ----------
You can recover your phone, on 4.4.2....but you won't see write protection disabled again.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Okay, thanks everyone
Been flashing my devices forever but they have all been samsungs and my phones for the past 4 years so im looking for help
I got a XT1064 for my wife who is still using a Nokia Pureview 808
Its a great little device and I wanted to root and install a customer recovery for it for backup reasons
Ive been over all the forums many times but its never clear 100% that the stuff works for the XT1064
I can root and unlock the bootloader with no issues my main questions are
Is it confirmed that TWRP 2.8.0.1 will work for this variant? If not what recovery would you recommend (links if possible would be great)
I know there are not really many ROM currently but did see some that are pretty much stock but optimized(more ram etc) are any confirmed to work ok on the XT1064?
This is my wifes phone so I cant have her without a working device too long and I am less willing to test since its not my device
Any help would be appreciated
fidorulz said:
Been flashing my devices forever but they have all been samsungs and my phones for the past 4 years so im looking for help
I got a XT1064 for my wife who is still using a Nokia Pureview 808
Its a great little device and I wanted to root and install a customer recovery for it for backup reasons
Ive been over all the forums many times but its never clear 100% that the stuff works for the XT1064
I can root and unlock the bootloader with no issues my main questions are
Is it confirmed that TWRP 2.8.0.1 will work for this variant? If not what recovery would you recommend (links if possible would be great)
I know there are not really many ROM currently but did see some that are pretty much stock but optimized(more ram etc) are any confirmed to work ok on the XT1064?
This is my wifes phone so I cant have her without a working device too long and I am less willing to test since its not my device
Any help would be appreciated
Click to expand...
Click to collapse
TWRP 2.8.0.1 does run on the XT1064, however it seems to be buggy. In my experience that recovery will randomly cause the phone to reboot for no reason. I personally prefer CWM, but TWRP 2.7xx has been reported as working well
P.S, don't ever flash your XT1064 back to stock with the mfastboot commands, I did it with the appropriate image for the US GSM model, and now my wifi is dead, and I cant find a workaround
Wish I had an XT1064 nandroid backup!
Bl00dyMurd3r said:
TWRP 2.8.0.1 does run on the XT1064, however it seems to be buggy. I personally prefer CWM, but TWRP 2.7xx has been reported as working well
P.S, don't ever flash your XT1064 back to stock with the mfastboot commands, I did it with the appropriate image for the US GSM model, and now my wifi is dead, and I cant find a workaround
Wish I had an XT1064 nandroid backup!
Click to expand...
Click to collapse
Well after a while I settled on Phil recovery and so far so good
http://forum.xda-developers.com/mot...covery-cwm-philz-touch-6-moto-g-2014-t2896586
As for roms dont seem to find any and im not willing to try
As for the back to stock which image did u use?
Would the correct one not be Android 4.4.4 Blur_Version.21.11.17.titan_retuaws.retuaws.en.US since this isnt the global version?
http://sbf.droid-developers.org/phone.php?device=36
Cant you simply use the right file and do it again?
fidorulz said:
Well after a while I settled on Phil recovery and so far so good
http://forum.xda-developers.com/mot...covery-cwm-philz-touch-6-moto-g-2014-t2896586
As for roms dont seem to find any and im not willing to try
As for the back to stock which image did u use?
Would the correct one not be Android 4.4.4 Blur_Version.21.11.17.titan_retuaws.retuaws.en.US since this isnt the global version?
http://sbf.droid-developers.org/phone.php?device=36
Cant you simply use the right file and do it again?
Click to expand...
Click to collapse
Blur_Version.21.11.17.titan_retuaws.retuaws.en.US was the one I flashed, so it should have worked, but unfortunately... :crying:
A user in another thread suggested that I flash the latest OTA update, but the problem is, the latest OTA update uploaded here isn't for the 1064, so the stock recovery refused to flash it, and with no wifi or mobile data, I can't download the OTA from the phone
Bl00dyMurd3r said:
Blur_Version.21.11.17.titan_retuaws.retuaws.en.US was the one I flashed, so it should have worked, but unfortunately... :crying:
A user in another thread suggested that I flash the latest OTA update, but the problem is, the latest OTA update uploaded here isn't for the 1064, so the stock recovery refused to flash it, and with no wifi or mobile data, I can't download the OTA from the phone
Click to expand...
Click to collapse
Have you tried Blur_Version.21.11.16.titan_retca.retca.en.CA?
Canadian version should have same bands as us version also noticed
retuglb.en.US and retuaws.en.U both show version 21.11.17 which is odd
fidorulz said:
Have you tried Blur_Version.21.11.16.titan_retca.retca.en.CA?
Canadian version should have same bands as us version also noticed
retuglb.en.US and retuaws.en.U both show version 21.11.17 which is odd
Click to expand...
Click to collapse
Didnt know the bands were the same, I'll give it a shot, thanks!
---------- Post added at 03:39 PM ---------- Previous post was at 03:08 PM ----------
Well I flashed the Canadian image, my wifi didnt work and it killed my radio lol
Flashed back to US and now the radio works but still no wifi :silly:
Bl00dyMurd3r said:
Didnt know the bands were the same, I'll give it a shot, thanks!
---------- Post added at 03:39 PM ---------- Previous post was at 03:08 PM ----------
Well I flashed the Canadian image, my wifi didnt work and it killed my radio lol
Flashed back to US and now the radio works but still no wifi :silly:
Click to expand...
Click to collapse
Thats odd. Maybe it has to do with the boot image. Has anyone been able to restore to stock with no issues?
Bl00dyMurd3r said:
Didnt know the bands were the same, I'll give it a shot, thanks!
---------- Post added at 03:39 PM ---------- Previous post was at 03:08 PM ----------
Well I flashed the Canadian image, my wifi didnt work and it killed my radio lol
Flashed back to US and now the radio works but still no wifi :silly:
Click to expand...
Click to collapse
Seems you got the wifi working again
http://forum.xda-developers.com/moto-g-2014/help/xt1064-wifi-reflashing-stock-t2928365
Good to know flashing to stock works now
Forgive me if this is a repeat. I did a search but didn't find anything the same.
I sold my LG G2 and was looking for an inexpensive replacement. The Nexus 5 is an obvious choice as it is powerful, proven and inexpensive.
But I saw that Staples here in Canada has an unlocked Moto G 2014 for a good price and decided to test drive.
Used Nexus 5 = same $$$ as new Moto G
Overall, a great device to be sure!
But... I do feel a little lag here and there. I can live without LTE if needed but lag bothers me.
So, since my G doesn;t have Lollipop yet, I am looking for insight from those who have the upgrade.
Does Lollipop smooth out the Moto G enough to make it a contender vs the Nexus?
Or is it a minor upgrade and not much smoother than the G on Kitkat?
Thanks in advance.
Nothing will change the fact that the Nexus 5 has a Snapdragon 800 and 2GB of RAM, whilst the Moto G has a Snapdragon 400 and 1GB of RAM. Assuming you account for the difference by running less background processes and multitasking less intensively, the Moto G is perfectly suitable as a general workhorse, but it will always hit performance bottlenecks earlier than a Nexus 5, regardless of what version of the operating system is installed.
It does seem that processes are killed pretty aggressively at the moment on Motorola's Android 5.0, just as they are on 4.4.4, but this can be adjusted to suit your preferences. It's a case of trading redraws for a bit more lagginess in general. Ultimately, if you can't adjust to the lesser performance of the Moto G and can do without Micro SD support, dual SIMs (if you have the XT1068/9) and no warranty, a secondhand Nexus 5 in good condition is a better choice.
Thank you kindly for that very solid response. I will keep an eye out for a used NX5.
On that note, you have to love when Staples of all places offers unlocked phones with a 14 day return policy.
Sandman2749 said:
Thank you kindly for that very solid response. I will keep an eye out for a used NX5.
On that note, you have to love when Staples of all places offers unlocked phones with a 14 day return policy.
Click to expand...
Click to collapse
I was faced with the same choice, but use 2 SIMs and don't like to carry 2 phones. I almost grabbed a Nexus 5 16GB for a little more than the Moto G.... The other great thing about the Nexus is you can testdrive Ubuntu and Sailfish...
The multitasking issue is the BIGGEST negative against Moto G 2014. If you ever plan to use maps and another app like chrome or music, or want to listen to music and another app (maps/chrome etc) at the same time, DO NOT get the Moto G 2014 as it is not able to do so. If you do not plan on doing any multitasking, then it is a worthy phone for the price. Has minimal lag, good screen, dual speakers, sd car slot.
Trekker56 said:
The multitasking issue is the BIGGEST negative against Moto G 2014. If you ever plan to use maps and another app like chrome or music, or want to listen to music and another app (maps/chrome etc) at the same time, DO NOT get the Moto G 2014 as it is not able to do so. If you do not plan on doing any multitasking, then it is a worthy phone for the price. Has minimal lag, good screen, dual speakers, sd car slot.
Click to expand...
Click to collapse
The second update of lollipop addressed the issue of memory management which caused lag and the phone is MUCH faster and smoother and I would recommend it to anyone now that the issue is fixed. I have tested the phone out and have not experienced lag ever since updating.
I am waiting for the update anxiously. I have Consumer Cellular branded Moto G 2014, which I manually flashed to 5.0 after installing the retail rom, but am unable to flash the 2nd OTA update and get the signature error
That's the xt1063 or xt1064?
Lamech242 said:
That's the xt1063 or xt1064?
Click to expand...
Click to collapse
xt1064
Trekker56 said:
xt1064
Click to expand...
Click to collapse
You need to go back to stock and flash the files from there.. I think the correct firmware that would allow you to update is the 21.11.17.. There's a windows tool over in android development that should help you to get back to stock.. Then manually flash the other two files with stock recovery..
Lamech242 said:
You need to go back to stock and flash the files from there.. I think the correct firmware that would allow you to update is the 21.11.17.. There's a windows tool over in android development that should help you to get back to stock.. Then manually flash the other two files with stock recovery..
Click to expand...
Click to collapse
I have already flashed first 5.0 OTA, looking for a way to flash the second 5.0 OTA.
Trekker56 said:
I have already flashed first 5.0 OTA, looking for a way to flash the second 5.0 OTA.
Click to expand...
Click to collapse
If you're getting an error while trying to flash the latest OTA you would need to go back to stock. That's the only way to fix that problem.
Lamech242 said:
If you're getting an error while trying to flash the latest OTA you would need to go back to stock. That's the only way to fix that problem.
Click to expand...
Click to collapse
What do you mean by stock? I'm already on stock 5.0.
___________________
Sent from my BN NookHD+ using Tapatalk Pro.
Trekker56 said:
What do you mean by stock? I'm already on stock 5.0.
___________________
Sent from my BN NookHD+ using Tapatalk Pro.
Click to expand...
Click to collapse
Stock as in KitKat.. But there's a TWRP flashable zip in android development with the latest lollipop version, so you won't need to use the backup, just flash TWRP with fastboot then flash the file.. I'll get the link.
---------- Post added at 02:55 AM ---------- Previous post was at 02:53 AM ----------
Lamech242 said:
Stock as in KitKat.. But there's a TWRP flashable zip in android development with the latest lollipop version, so you won't need to use the backup, just flash TWRP with fastboot then flash the file.. I'll get the link.
Click to expand...
Click to collapse
http://forum.xda-developers.com/mot...-stock-rom-t2970427/post57436527#post57436527 here you go. He says it'll overwrite the TWRP recovery with the stock recovery so you should be good to go.
Thanks for the link. It says it is for xt1063, safe to flash on xt1064?
___________________
Sent from my BN NookHD+ using Tapatalk Pro.
Trekker56 said:
Thanks for the link. It says it is for xt1063, safe to flash on xt1064?
___________________
Sent from my BN NookHD+ using Tapatalk Pro.
Click to expand...
Click to collapse
I apologize, I was helping someone else with a xt1063 and forgot you said you had an xt1064 variant, I'm not sure if its safe to flash, I would suggest you don't, but I'm told there's not much difference between them.. I'll check for you tho.
Lamech242 said:
I apologize, I was helping someone else with a xt1063 and forgot you said you had an xt1064 variant, I'm not sure if its safe to flash, I would suggest you don't, but I'm told there's not much difference between them.. I'll check for you tho.
Click to expand...
Click to collapse
No need to apologize. Thanks for all the help.
Lamech242 said:
I apologize, I was helping someone else with a xt1063 and forgot you said you had an xt1064 variant, I'm not sure if its safe to flash, I would suggest you don't, but I'm told there's not much difference between them.. I'll check for you tho.
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g-2014/development/guide-lollipop-xt1064-north-edition-t2955076 have you tried using this guide? Like I said the key to getting updates to work with stock recovery is by going back to android 4.4.4 KitKat for your device.
Lamech242 said:
http://forum.xda-developers.com/moto-g-2014/development/guide-lollipop-xt1064-north-edition-t2955076 have you tried using this guide? Like I said the key to getting updates to work with stock recovery is by going back to android 4.4.4 KitKat for your device.
Click to expand...
Click to collapse
So to flash the second 5.0 OTA, I should go back to 4.4.4? This doesn't sound right.
Can you help me flash the TWRP recovery. I get the partition size error when I try to flash it. If I get that flashed, then I can use the link you provided to flash the rom with second 5.0 OTA.
Trekker56 said:
So to flash the second 5.0 OTA, I should go back to 4.4.4? This doesn't sound right.
Can you help me flash the TWRP recovery. I get the partition size error when I try to flash it. If I get that flashed, then I can use the link you provided to flash the rom with second 5.0 OTA.
Click to expand...
Click to collapse
When you go back to stock you flash each file in stock recovery. Flash one file then boot up into android and set everything up, then go back into stock recovery and flash the other file.
If you're getting the partition size error that means TWRP flashed successfully. Just use volume down to select recovery then press volume up to enter TWRP. Then you can flash the file I provided.
Hello mighty XDA developers,
Reason(?):
I have f**ked my XT1097 (Bootloader unlocked, Telus, Canada). I tried to root my Lollipop phone with bhp090808's multi-tool V4.1. Somehow the tool was unsuccessful on rooting my phone. It installed supersu and that was that.
With Supersu installed, apps were somehow unable to download from Google Play, therefore I disabled it and the problem was gone. I was then in vacation so I have no access of Windows so I left it at that for a week, phone ran normally.
After I got back form vacation, I reverted my phone back to stock recovery and 4.4.4 with the Multi-tool, in order to try re-rooting the phone. I might or might not have started the root process when I was in 4.4.4 (I honestly don't remember). Afterwards my phone's wifi stopped working (cannot be turned on or off, with the status of "Turning Wifi On"). The phone also reboots itself after around 1 minute.
I have a bad flash, now whenever I update to Lollipop, my wifi stops working and I get nonstop reboots. Phone is perfectly fine when I stay in KK
and I have lost my IMEI
Tried methods:
- I have tried erasing the phone by going into the backup and reset menu to reset the phone,the same problems remain.
- I have tried clearing the phone by erasing data and catch from stock recovery, the same problems remain.
- I have tried using the Muti-Tool to revert back to stock. but then the phone restarts every time before adb can do anything
- I have tried using RSD, flashing the Brazilian XT1097 .img into the phone. Despite a successfully flash, the same problems remain.
Problem:
- Phone's wifi is stuck
- Phone keeps rebooting (safe mode or not)
- When phone is powered off, it will restart itself and then go on the reboot loop again (even when i boot into safe mode and turn it off form there)
- Phone does not turn off without rebooting itself other than powering off from Recovery
- Phone Cannot be charged
Help needed!
I really messed my phone up and need help! Please can someone suggest a solution? I dont have TWRP so I cannot wipe system and reinstall
Motosurf
BlueEditionE6 said:
After I got back form vacation, I reverted my phone back to stock recovery and 4.4.4
Click to expand...
Click to collapse
It is dangerous to downgrade a Moto X. This is not a Nexus device.
---------- Post added at 03:59 AM ---------- Previous post was at 03:57 AM ----------
BlueEditionE6 said:
I dont have TWRP so I cannot wipe system and reinstall
Click to expand...
Click to collapse
Press and hold the power button to shut it off and then immediately press and hold the vol down and then press and hold power. Hold both for about 4 seconds and release. This should put you into fastboot mode. Then plug the device into your computer and start Motorola Device Manager.
---------- Post added at 04:00 AM ---------- Previous post was at 03:59 AM ----------
BlueEditionE6 said:
ps. the phone's battery is so low that it cant do anything. Wondering if the phone charges in Recovery mode. Battery status says charging, but I am not sure?
Click to expand...
Click to collapse
Do you have a turbo charger or know anyone who does?
JulesJam said:
It is dangerous to downgrade a Moto X. This is not a Nexus device.
---------- Post added at 03:59 AM ---------- Previous post was at 03:57 AM ----------
Press and hold the power button to shut it off and then immediately press and hold the vol down and then press and hold power. Hold both for about 4 seconds and release. This should put you into fastboot mode. Then plug the device into your computer and start Motorola Device Manager.
---------- Post added at 04:00 AM ---------- Previous post was at 03:59 AM ----------
Do you have a turbo charger or know anyone who does?
Click to expand...
Click to collapse
yea i wasnt having trouble getting into fastbootmode. And turns out the phone does charge while in recovery
BlueEditionE6 said:
yea i wasnt having trouble getting into fastbootmode. And turns out the phone does charge while in recovery
Click to expand...
Click to collapse
OK so did you reflash system?
JulesJam said:
OK so did you reflash system?
Click to expand...
Click to collapse
reflashed KK, when i update to L, it does the same thing again.
BlueEditionE6 said:
reflashed KK, when i update to L, it does the same thing again.
Click to expand...
Click to collapse
Are you taking the OTA to get back to L? And if so, are you completely stock when you take the OTA?
JulesJam said:
Are you taking the OTA to get back to L? And if so, are you completely stock when you take the OTA?
Click to expand...
Click to collapse
Reverted to KK from the multi-tool and used the ota (XT1095), as well as reverted back to KK and used the xt1097 ota. same issue. I cannot find the XT1097 KK img
BlueEditionE6 said:
Reverted to KK from the multi-tool and used the ota (XT1095), as well as reverted back to KK and used the xt1097 ota. same issue. I cannot find the XT1097 KK img
Click to expand...
Click to collapse
If you are not completely stock 100%, it is best not to take the OTA b/c the OTA is a patch.
I would revert back to whatever version of KK system you did before, and also have a stock recovery. Then use Motorola Device Manager to get back to L. MDM should flash the correct version of system for your device.
Do you have MDM on your computer?
JulesJam said:
If you are not completely stock 100%, it is best not to take the OTA b/c the OTA is a patch.
I would revert back to whatever version of KK system you did before, and also have a stock recovery. Then use Motorola Device Manager to get back to L. MDM should flash the correct version of system for your device.
Do you have MDM on your computer?
Click to expand...
Click to collapse
Motorola Device Manager? Does it work like that ? No the problem is I dont have my original firmware, The web does not seem to have victara_retca.retca.en.ca.tkpca. kk nor L. Put up a seperate post asking if anyone has it on xda and on MotoFirmware
BlueEditionE6 said:
Motorola Device Manager? Does it work like that ? No the problem is I dont have my original firmware, The web does not seem to have victara_retca.retca.en.ca.tkpca. kk nor L. Put up a seperate post asking if anyone has it on xda and on MotoFirmware
Click to expand...
Click to collapse
Motorola Device Manager should download it and install it to your phone if you flash back to kit kat and then run MDM with your phone connected to your computer.
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Also, you will end up with a copy of the firmware on your computer in :
c:\programdata\motorola\sue\firmwares
JulesJam said:
Motorola Device Manager should download it and install it to your phone if you flash back to kit kat and then run MDM with your phone connected to your computer.
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Also, you will end up with a copy of the firmware on your computer in :
c:\programdata\motorola\sue\firmwares
Click to expand...
Click to collapse
just to be sure, even if i flash into a 1095 kk, mdm would flash me back to 1097?
BlueEditionE6 said:
just to be sure, even if i flash into a 1095 kk, mdm would flash me back to 1097?
Click to expand...
Click to collapse
You have to flash the stock Telus firmware.
Use rsdlite or mfastboot to return your phone to stock 5.0.1.
You can download it here: (yes it will take a few hours)
http://www.filefactory.com/file/7hv608q62qc5/RETCA_XT1097_5.0.1_LXE22.46-22_cid14_CFC.xml.zip
Steve-x said:
You have to flash the stock Telus firmware.
Use rsdlite or mfastboot to return your phone to stock 5.0.1.
You can download it here: (yes it will take a few hours)
http://www.filefactory.com/file/7hv608q62qc5/RETCA_XT1097_5.0.1_LXE22.46-22_cid14_CFC.xml.zip
Click to expand...
Click to collapse
OH WOW THANKS! i have been looking for this all along!
BlueEditionE6 said:
just to be sure, even if i flash into a 1095 kk, mdm would flash me back to 1097?
Click to expand...
Click to collapse
All you can do is try, you have flashed back to KK before so you know it doesn't brick your phone. I am only talking about flashing the SYSTEM (system.img) back to kit kat, not the bootloader or the partition table. If you have a custom recovery, I don't think it will work though. I think you need a stock recovery. The recovery can be lollipop.
When I flash my Verizon XT1096 back to kitkat system, with lollipop stock recovery, MDM will flash my system back to lollipop.
I understand about the issue with the different models, and I can't tell you whether MDM will have a problem with that or not, but if it does, it will just do nothing. You have flashed back to XT1095 KK before so I don't see why it would hurt to see what MDM does. It will be able to tell you have an XT1097 so it won't try to install a system for an XT1095.
Steve-x said:
You have to flash the stock Telus firmware.
Use rsdlite or mfastboot to return your phone to stock 5.0.1.
You can download it here: (yes it will take a few hours)
http://www.filefactory.com/file/7hv608q62qc5/RETCA_XT1097_5.0.1_LXE22.46-22_cid14_CFC.xml.zip
Click to expand...
Click to collapse
Hi steve, I am getting "Failed flashing process. 3/21 flash partition "gpt.bin" -> Phone returned FAIL
Did i do something wrong?
EDIT: replaced the gpt file and the motoboot file with the 5.0.1 file.
EDIT 2: at 4.4.4 rectca, imei and radio is back, but there is no update to L, if I rsd the 5.0.1 rectca, the same issue comes back
What else have you all flashed, if you tried the 5.1 soak you likely will have to skip flashing gpt and motoboot.
Steve-x said:
What else have you all flashed, if you tried the 5.1 soak you likely will have to skip flashing gpt and motoboot.
Click to expand...
Click to collapse
I have tried flashing the 5.0 update front the multi tool. I tried removing get and process stopped
Sent from my XT1080 using XDA Premium 4 mobile app
Well I really feel like there is something you're not telling us that you've done in the past to the phone. Please try to give detailed answers.
#1 - Are you 100% sure it is a Telus phone and not a Wind Mobile XT1097?
#2 - When flashing the Telus 5.0.1 image what does the phone say when the process fails?
#3 - You mention flashing 4.4.4 - do you mean a full image or just some of the files like you are mixing and matching some 4.4.4 and some 5.0.1?
#1 - Are you 100% sure it is a Telus phone and not a Wind Mobile XT1097?
No, I won this poem from Motorola and it arrived to my doorsteps unlocked. It might be on Wind, sorry I didn't think of this possibility
#2 - When flashing the Telus 5.0.1 image what does the phone say when the process fails?
The process doesn't fail while fishing to L, it only failed when I tried to flash it from the broken L to KK. When my phone is on L, the wifi, signal doesn't work, and it reboots. As shown in the video
https://youtu.be/pDCCr2BE4n0
#3 - You mention flashing 4.4.4 - do you mean a full image or just some of the files like you are mixing and matching some 4.4.4 and some 5.0.1?[/QUOTE]
Well like I said I tried flashing the KK that you linked to me, but then it gets stuck at gpt and motoboot. So I got the two files from the L zip and KK flashes successfully. Works like a charm too. Other than that fact that it doesn't update
Extra info. I have had TWRP and CM12.1 just because it was the only way for the phone to charge
Sent from my XT1080 using XDA Premium 4 mobile app
It all sounds pretty weird. I suspect the phone may actually be a Wind mobile retail edition. They come factory unlocked, the Telus version would be locked.
The link I gave was Lollipop 5.0.1 for the Telus version. Being I think you have the Wind mobile here is the link for the Wind mobile 4.4.4:
http://www.filefactory.com/file/38yhbfahth0p/RETCA_XT1097_4.4.4_KXE21.187-52_cid14_CFC.xml.zip
When you download the file and try to flash using rsdlite gpt and motoboot will fail as they cannot be downgraded. This is not a problem. Just edit the xml file to remove them and then flash the entire package with rsdlite. When done you will be on factory 4.4.4. At that point you should get prompted to update to 5.0.1.
Hey guys,
I am trying to intall a custom rom on my blu vivo xl. My worries are that i either soft-brick the phone or boot the new rom and having no signal due to no imei, or no 4G due to band change if it's even possible. I'll leave you with some reliable data:
-arch64 procesor
-5.1 stock android : BLU_V0030UU_V07_GENERIC 25-01-2016
- 3.10.65+ kernel
- Rooted with kingoroot
- Previously had xposed, but uninstalled due to random reboots.
I was looking to install aospextended rom:
https://forum.xda-developers.com/vivo-xl/development/rom-aospextended-rom-v4-1-t3592932
I'd really appreciate if you could orient me or refer me to a post with instructions, since i didn't find one. It's been some years since i don't do this back to the legendary HTC HD2 and i'm missing it btw
Thanks!
Nacho
https://forum.xda-developers.com/vivo-xl/how-to/fix-soft-brickedcannot-enter-recovery-t3594733
Unfortunately most custom ROMs in this forum were based off Gionee so likely you will get no SIM. Use your stock ROM /etc/firmware folder to replace that in ROM.
min1968 said:
https://forum.xda-developers.com/vivo-xl/how-to/fix-soft-brickedcannot-enter-recovery-t3594733
Unfortunately most custom ROMs in this forum were based off Gionee so likely you will get no SIM. Use your stock ROM /etc/firmware folder to replace that in ROM.
Click to expand...
Click to collapse
Thank you for your response.
I've already got twrp installed for 5.1
So i should just install this MM based ROM i said on the post and replace /etc/firmware folder?
Or i need to install stock MM from ota first?
Thing is, i cant OTA update, it says that the system is corrupted, i even tried from twrp but no luck
I've seen that i need stock mm to be able to install most of the custom rom's in xda
Thing is i can't install any OTA update. Should i flash 5.1 stock rom on top of the modified one i'm running?
By modified i am talking about the root and xposed, which is the cause i cant OTA
Nacholer said:
I've seen that i need stock mm to be able to install most of the custom rom's in xda
Thing is i can't install any OTA update. Should i flash 5.1 stock rom on top of the modified one i'm running?
By modified i am talking about the root and xposed, which is the cause i cant OTA
Click to expand...
Click to collapse
Follow my steps exactly then you can do OTA to MM.
The key is to use the 8 files backup to restore stock 5.1, not the backup only includes 4 files.
min1968 said:
Follow my steps exactly then you can do OTA to MM.
The key is to use the 8 files backup to restore stock 5.1, not the backup only includes 4 files.
Click to expand...
Click to collapse
Alright, ill do that. Tried with the 4 files backup last night, didn't work as you just told.
Do you have a link to the 5.1 stock recovery i should flash with sp flash tool? I can't find it anywhere. It wont work if i still have twrp installed, right?
Thanks! i really appreciate it, and great guide btw
min1968 said:
Follow my steps exactly then you can do OTA to MM.
The key is to use the 8 files backup to restore stock 5.1, not the backup only includes 4 files.
Click to expand...
Click to collapse
I installed the 11 files backup and i still can't get ota. I should install the stock recovery, right? got a link for that?
Thank you in advance!
In my case I have a fully working STOCK but ROOTED Marshmallow Blu Vivo XL with working IMEI, but as soon as I wipe and install say AEX rom, I lose both IMEI functions and also get the dreaded wifi NVRAM error (but working wifi).
I also restored the etc/firmware directory to AEX but it wont help regain IMEI functionality.
MTK Engineering mode does not work on AEX because it complains not being stock rom so it closes.
For the life of me, I can't make a connection to the PC through SP Flash Tool too.
Any pointers?
TIA!
Nacholer said:
I installed the 11 files backup and i still can't get ota. I should install the stock recovery, right? got a link for that?
Thank you in advance!
Click to expand...
Click to collapse
Yes need stock recovery to do OTA.
https://forum.xda-developers.com/vivo-xl/development/recovery-t3311601
---------- Post added at 03:00 PM ---------- Previous post was at 02:56 PM ----------
Rayan said:
In my case I have a fully working STOCK but ROOTED Marshmallow Blu Vivo XL with working IMEI, but as soon as I wipe and install say AEX rom, I lose both IMEI functions and also get the dreaded wifi NVRAM error (but working wifi).
I also restored the etc/firmware directory to AEX but it wont help regain IMEI functionality.
MTK Engineering mode does not work on AEX because it complains not being stock rom so it closes.
For the life of me, I can't make a connection to the PC through SP Flash Tool too.
Any pointers?
TIA!
Click to expand...
Click to collapse
Read above my #2 post on customer ROMs in this forum.
And my this post to rescue your Blu Vivo XL :
https://forum.xda-developers.com/vivo-xl/how-to/fix-soft-brickedcannot-enter-recovery-t3594733
min1968 said:
Yes need stock recovery to do OTA.
https://forum.xda-developers.com/vivo-xl/development/recovery-t3311601
Thank you!! i'll try that and report back.
Click to expand...
Click to collapse
min1968 said:
Yes need stock recovery to do OTA.
https://forum.xda-developers.com/vivo-xl/development/recovery-t3311601
---------- Post added at 03:00 PM ---------- Previous post was at 02:56 PM ----------
Read above my #2 post on customer ROMs in this forum.
And my this post to rescue your Blu Vivo XL :
https://forum.xda-developers.com/vivo-xl/how-to/fix-soft-brickedcannot-enter-recovery-t3594733
Click to expand...
Click to collapse
Thanks for the reply Min1968!
Yes, I know how to recover IMEI on the stock ROM and I'm currently running stock MM rooted with working IMEI.
The problem I have is that I can't run custom ROMs even if I try the etc/firmware trick you mentioned.
What is the stock TWRP partition that has the modem and IMEI? Maybe if I flash it back through TWRP once I get AEX rom up and running?
Thanks!
min1968 said:
Yes need stock recovery to do OTA.
https://forum.xda-developers.com/vivo-xl/development/recovery-t3311601
---------- Post added at 03:00 PM ---------- Previous post was at 02:56 PM ----------
Click to expand...
Click to collapse
Hey, i got into deep trouble. i Factory reseted the phone. Then did fastboot oem unlock, flashed by fastboot flash recovery, the stock recovery img. After that, the phone boot-loops. I installed back twrp and it sais : Unable to mount /data
Now i can't access my internal memory and i'm stuck. Please help me!
Thanks, i really appreciate this
Nacholer said:
Hey, i got into deep trouble. i Factory reseted the phone. Then did fastboot oem unlock, flashed by fastboot flash recovery, the stock recovery img. After that, the phone boot-loops. I installed back twrp and it sais : Unable to mount /data
Now i can't access my internal memory and i'm stuck. Please help me!
Thanks, i really appreciate this
Click to expand...
Click to collapse
Okay, i fixed it reformatting the data partition on twrp. Thing is, when i want to install the recovery that happens. Maybe if i dont oem unlock?
well, i did that and it booted with the stock recovery. But i still can't OTA, i really dont know why, i even could not when i bought the phone
Nacholer said:
Hey guys,
I am trying to intall a custom rom on my blu vivo xl. My worries are that i either soft-brick the phone or boot the new rom and having no signal due to no imei, or no 4G due to band change if it's even possible. I'll leave you with some reliable data:
-arch64 procesor
-5.1 stock android : BLU_V0030UU_V07_GENERIC 25-01-2016
- 3.10.65+ kernel
- Rooted with kingoroot
- Previously had xposed, but uninstalled due to random reboots.
I was looking to install aospextended rom:
https://forum.xda-developers.com/vivo-xl/development/rom-aospextended-rom-v4-1-t3592932
I'd really appreciate if you could orient me or refer me to a post with instructions, since i didn't find one. It's been some years since i don't do this back to the legendary HTC HD2 and i'm missing it btw
Thanks!
Nacho
Click to expand...
Click to collapse
to get imei working https://forum.xda-developers.com/vivo-xl/help/solution-to-sim-detected-flashing-t3620224