I have upgraded to 4.3 and now the Desk Clock is a mess. I have the digital version showing on the home page, when I open it, all the clocks then, (timer etc) are analogue, cannot find a way to change to digital, but my main problem is the Desk Clock mode.
When in operation it will go to a blank screen when sleep mode is activated and I can find no way of overiding it. Also the figures are now of a boulder construction meaning more light emitted, not good as a night clock.
The previous version would stay on all night, with the time moving around (screensaver) and also was a lot less bright, especially if a soft swipe was used to dim it.
Am I missing something here or as this App taken a massive backward step ??
mmrb said:
I have upgraded to 4.3 and now the Desk Clock is a mess. I have the digital version showing on the home page, when I open it, all the clocks then, (timer etc) are analogue, cannot find a way to change to digital, but my main problem is the Desk Clock mode.
When in operation it will go to a blank screen when sleep mode is activated and I can find no way of overiding it. Also the figures are now of a boulder construction meaning more light emitted, not good as a night clock.
The previous version would stay on all night, with the time moving around (screensaver) and also was a lot less bright, especially if a soft swipe was used to dim it.
Am I missing something here or as this App taken a massive backward step ??
Click to expand...
Click to collapse
Just me then, no one else have this issue ??
Related
I'm not sure if this has been brought up before, but I wouldn't be surprised if it was missed. I am the type of user who likes to use the phone at full brightness, as it does not seem to have a huge negative impact on my battery life in day to day operations.
I was looking carefully at the browser on the Galaxy and wondered why the whites looked so dimmed in comparison to other parts of the operating system.
I had already done the following:
1. Turned the OS brightness all the way up.
2. Turned browser brightness all the way up.
3. Disabled the screen power saving mode.
I then downloaded a flashlight application and maxed it to 100% while switching to the browser with the Home key multitask, and going back and forward between the flashlight app and the browser app, it is very clear that the browser is not pushing max brightness. Even though the brightness settings on both the OS and the browser are maxed, it seems as though the browser is capped to 80% brightness or so.
My friend also verified this during his test run, as he has just bought the Samsung Vibrant and noticed the same thing. I understand many will just leave the auto-brightness setting on, but that's not really addressing the issue here.
Is there a way for an XDA developer to correct this issue through a patch or ROM?
thanks
I checked with the shell and when brightness is at 100% it has an absolute value of 255, the same when I'm at the browser set with full brightness, so it seems it's working as it should.
You can check it with this command
Code:
cat /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/blacklight/s5p_bl/actual_brightness
darksnarfer said:
I checked with the shell and when brightness is at 100% it has an absolute value of 255, the same when I'm at the browser set with full brightness, so it seems it's working as it should.
You can check it with this command
Code:
cat /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/blacklight/s5p_bl/actual_brightness
Click to expand...
Click to collapse
I don't know, I experience the same thing as the OP. Everything's bright, except when surfing the web.
Same issue here. I use Opera in bright daylight.
Sent from my GT-I9000 using XDA App
If you go in to the brightness settings there is an option at the very bottom called "Power saving mode". I'm not sure if that is having any effect on the browser.
Thanks for the numbers, but I gotta say, just comparing the flashlight app and hitting the back arrow to toggle to the browser, it is beyond obvious that the browser is not as bright as the flashlight application. I used google with it's white background and zoomed in to an area that was just white to avoid other distractions.
This is the best way to test since there will be no transition in between the application toggle and you see the screen dim easily.
As indicated by my original post, I have also turned off the power saving feature so that is not a concern. Someone did say that the Behold 2 has the same cap for their browser and that this is a samsung specific setting that's probably there to save battery. I haven't been able to confirm it on that phone yet but just give the flashlight test a chance and you'll see.
oh one last thing i noticed is, when going from the browser back to the flashlight, sometimes the flashlight app is also dimmed at the same level brightness as the browser, but tapping the screen 'wakes' up the app into full brightness.
TGalaxy browser brightness
To me it's very obvious that the browser is dimmed down, I'd say more than to 80%... Having google as the default homepage couldn't make it more obvious when opening the browser! Samsung obviously thought that no one with a decent eyesight will buy their phone. Or anyone who feels capable of managing their phone's battery life themselves.
It's just one of those niggling things that had to be included, lessening the experience of an otherwise rather breathtaking phone. Another one is the compulsory vibration when charging is finished - makes me wonder when others, or the developers for that matter, charge their smartphones! I charge them overnight, and of course every night... or at least used to, as with the Galaxy S, I can no longer sleep.
I think I've been through every menu possible to change these couple of features, with no success... if anyone knows anything, please share.
It happens on the dim-side, too
I have the same problem, but on the dim side. The browser brightens the screen when it comes on if you have the brightness set to zero. I like it dimmed all the way at night if I'm reading in bed when the lights are out and my partner is asleep, but it keeps turning it up so it's pretty bright in the pitch dark. Arrgh. It's my phone, can't I set it the way I want? Grr.
I've read that there are limitations on how much the screen dims and brightens unless you have a rooted phone and you use an app that's not built into the OS.
I rooted mine and there are some configuration apps that will set it to 0, but I think the built-in operating system slider doesn't go all the way to zero and might not go all the way to 255 when you slide it to the very edges. Supposedly it only goes to 10 on the low side from the notes on some apps.
So, probably it's a similar limitation on the slider for the screen brightness in the browser. We're probably stuck with this problem until someone writes an app that lets you change this setting to any value between 0 and 255 since the default sliders don't allow the low side and I'm guessing not the high side either.
So . . . any android developers out there, it would be cool if you could make an app to change this setting if it's available programatically somewhere.
I tried the "Dimmer" and "Brightness!" apps from the market. But none of them 'Keep' the brightness at the minimum always.
Hi all,
Got the Galaxy S for a month, pretty happy with it. Yesterday, the brightness suddenly gone up. The worst part is the display lost the gradient scaling and it is replaced by colour bands!
Apps like the stock video player for example. Before the video is played, you can see the grey control bar at the bottom covers by a lot of colour bands. The colour of the movie is all washed out as if you were playing it in 8 bit colour mode. Where the same avi played okay before, crystal clear and colour was rich.
Same thing with the charging screen while the phone is off. You can see the colour bands on the grey area of the shadow of the green battery. Just wondering if anyone has the same problem?
Cheers!
Factory reset :d
Tried all that full factory wipe, data reset, flash to different rom. Nothing works
Then your device's probably faulty. replace it.
Pretty certain it is. I took a screenshot of the video player and it looks fine but on the screen, you can still see those colour bands meters away.
I guess this indicates the LCD is faulty.
romhunter said:
I guess this indicates the LCD is faulty.
Click to expand...
Click to collapse
The galaxy s has no LCD its LED
Ive noticed when you slide down that tray from the top, when closing it mine has MANY TIMES switched to full brightness. But simply tapping the brightness button on the multi widget thingy makes it go back to how I want.
evil-doer said:
The galaxy s has no LCD its LED
Ive noticed when you slide down that tray from the top, when closing it mine has MANY TIMES switched to full brightness. But simply tapping the brightness button on the multi widget thingy makes it go back to how I want.
Click to expand...
Click to collapse
Thats because you can adjust the brightness by sliding your finger accross the notification bar.... doesnt work if you have auto brightness ticked...
talboy said:
Thats because you can adjust the brightness by sliding your finger accross the notification bar.... doesnt work if you have auto brightness ticked...
Click to expand...
Click to collapse
I have auto brightness ticked, sliding still works for me
Standard rom btw...
Sent from my GT-I9000 using XDA App
Hi I have the exact same problem! But I didn't notice it before now wen I saw this thread. But all the colours are just fine when I play a vid, it's just the grey controlbar that is by many stripes of different colours, looks like 8bit colour. But when the vid starts playing its just fine, because it gets transparent. Should I get this phone changed, have just had it a couple of weeks.
Sent from my GT-I9000 using XDA App
Hi Radat,
I posted more info in the other forum including some screenshots. http://forums.whirlpool.net.au/forum-replies.cfm?t=1520586
Hope yours okay. I am going to call Samsung tomorrow.
romhunter,
yup, saw the screenshots, looks like quantization problem i.e. that colours are using fewer bits than normal. For example, RGB screen might use 24 bits per pixel, 8 bits per r/g/b colour, the screenshots seem to suggest only 5 or 6 bits per colour.
Hopefully this is just a software glitch, though you said you already tried factory reset / wipe, could it be a loose cable wire somewhere or maybe a problem with the screen to mainboard connector?
talboy said:
Thats because you can adjust the brightness by sliding your finger accross the notification bar.... doesnt work if you have auto brightness ticked...
Click to expand...
Click to collapse
awesome. theres so many little shortcuts like this ive yet to learn. thanks
On my sgs, there is a green colour attached to to the grey colours, I can see it really good when using Screen test app on the gray scale screen, all grey is sort of green!
romhunter said:
Hi all,
Got the Galaxy S for a month, pretty happy with it. Yesterday, the brightness suddenly gone up. The worst part is the display lost the gradient scaling and it is replaced by colour bands!
Cheers!
Click to expand...
Click to collapse
Just got a brand new device. Used it for about an hour, then the exact same thing happened - out of the blue.
Any possible home-front solutions? Having to take it to be serviced is a PITA for me ATM.
Mine definitely seems to have banding in the video player control pane before the video playback starts. Can someone please post a screenshot of how it should be? I haven't seen the banding issue anywhere else except the battery charging indicator when charging the phone when it's turned off. And as far as I remember they were always like that.
So can someone please post a screenshot of how it should be for me to compare.
I have the same problem appeared after upgrading to Froyo. Brightness increased (even it is high in the lowest setting) and color saturation also increased. As a result, i see bandings or lines where a color gradient exist. I added an example photo from "Samsung Apps" page. You can easily see bandings on the bottom. I see such things in a PC screen if color adjustment is not optimum. So there must be a way to adjust screen saturation and brightness by a software through registry i think. It seems like a software problem. I think it is a very rare problem, i found few people on the web complaining about it. Mostly HTC Desire, which use also Samsung Amoled screen, users complaining about it.
I did everything said on forums to solve it but no way. I flashed many different roms both eclair and froyo, use a software given in HTC forums to change RGB color, changed color settings through video player etc. Nothing worked. Please help
victor79 said:
I have the same problem appeared after upgrading to Froyo. Brightness increased (even it is high in the lowest setting) and color saturation also increased. As a result, i see bandings or lines where a color gradient exist. I added an example photo from "Samsung Apps" page. You can easily see bandings on the bottom. I see such things in a PC screen if color adjustment is not optimum. So there must be a way to adjust screen saturation and brightness by a software through registry i think. It seems like a software problem. I think it is a very rare problem, i found few people on the web complaining about it. Mostly HTC Desire, which use also Samsung Amoled screen, users complaining about it.
I did everything said on forums to solve it but no way. I flashed many different roms both eclair and froyo, use a software given in HTC forums to change RGB color, changed color settings through video player etc. Nothing worked. Please help
Click to expand...
Click to collapse
I looked at ur pic. I honestly dont see any problem with it. What is this banding ur talking about?
Sent from my GT-I9000 using XDA App
Bottom of the screen, around "2010 Samsungs Electronics". This part should be a smooth color transition from blue to transparent but there are circular lines between colors. Is your screen the same.
Another example. The one on the phone looks white on the upper part where a color transition from dark to light black exist and there are visible lines. But normally it was looking like the other picture (taken from notebook screen) before this problem
ah on that screen i already see 8 shades of blue, most be around 4k colors .. bummer though, it's normally a software problem, doubt that a conector has come loose. (but possible if it's a pimped up composite plug with Y/Pr/Pb, .. eh still impossible cos it's getting decoded before that)
Hi Guys,
Is there a way to automatically turn off the screen at night (during a specific time).
Is there any app to do this ? Or tasker/IFTTT/Tockle profile to do the same ?
I would like a swipe-from-the-right switch similar to the mute switch (swipe from top) which puts the watch into airplane mode and deactivates the always on mode, too. (=night mode)
WatchMaker app just got (after the last update) tasker plugin. You can switch different faces based on different parameters. If you build a face with dim mode - off and you will activate-it after midnight (as an example), then you will get exactly what you want.
Any example for this.. I am unable to figure this out
You need to install "tasker" also, in parallel with "watchmaker".'Go to watchmaker app and create the watch face you desire (or download one from the internet - there are plenty to choose from).
Take the watchface of your choice and create a duplicate.
On the duplicate add a BLACK png file on top of everything and activate-it only in dim mode.
Then, set-u tasker to switch on the duplicate face while it's night and to the original face in the rest of the day.
Now, you will basically have the same watchface in all circumstances, but at night, the dim mode will just be black (which, in the amoled world, means, screen off).
ro_explorer said:
You need to install "tasker" also, in parallel with "watchmaker".'Go to watchmaker app and create the watch face you desire (or download one from the internet - there are plenty to choose from).
Take the watchface of your choice and create a duplicate.
On the duplicate add a BLACK png file on top of everything and activate-it only in dim mode.
Then, set-u tasker to switch on the duplicate face while it's night and to the original face in the rest of the day.
Now, you will basically have the same watchface in all circumstances, but at night, the dim mode will just be black (which, in the amoled world, means, screen off).
Click to expand...
Click to collapse
you can do the same thing without Tasker:
add a BLACK png file- or even better: a shape with the color black and size of 512x512px - on top of everything and activate-it only in dim mode
then use the following formula in the opacity field:
{dh23} > 18 and 100 or {dh23} < 7 and 100 or 0
red indicates the time in which to apply the filter (in my case between 19:00 and 07:00)
praddz said:
Hi Guys,
Is there a way to automatically turn off the screen at night (during a specific time).
Is there any app to do this ? Or tasker/IFTTT/Tockle profile to do the same ?
Click to expand...
Click to collapse
I'm just using "Slumber for Android Wear"
It makes the screen black when you put the watch on his cradle.
No airplane mode though
2k4ever said:
you can do the same thing without Tasker:....
Click to expand...
Click to collapse
Oh .. you are sooo right ... I missed that possibility ... it was a situation of not seeing the forest because of the trees
ro_explorer said:
Oh .. you are sooo right ... I missed that possibility ... it was a situation of not seeing the forest because of the trees
Click to expand...
Click to collapse
yes, WatchMaker is great on its own - but I really love the tasker integration!
I'm using the above formula to set a 50% opacity shade during the night hours in order to dim the screen
btw: the same thing should be possible with Facer
2k4ever said:
yes, WatchMaker is great on its own - but I really love the tasker integration!
I'm using the above formula to set a 50% opacity shade during the night hours in order to dim the screen
btw: the same thing should be possible with Facer
Click to expand...
Click to collapse
i have used tasker to set the black watch face in the night. but 1 problem, watchmaker works only when one of the faces from watchmaker is selected. If i select any of stock watchface, the tasker thing does not work as it is mentioned in watchmaker app description that to change the face one of the watchmaker faces should be selected on the watch..
Of course it's working like that, seriously, what have you expected?
If/when the main wear app will allow changing faces remotely via tasker (or it will offer an API for that) then we will be able to do that.
Anyway, my watch is turning off by itself while it's placed in the charger. It will not turn off immediately but after few minutes.
praddz said:
i have used tasker to set the black watch face in the night. but 1 problem, watchmaker works only when one of the faces from watchmaker is selected. If i select any of stock watchface, the tasker thing does not work as it is mentioned in watchmaker app description that to change the face one of the watchmaker faces should be selected on the watch..
Click to expand...
Click to collapse
I haven't tried it myself, but FaceLift could be what you are looking for
it should allow you to switch to watchmaker (which you have to pre-set with a black image) and back to the stock face at certain times
ro_explorer said:
Anyway, my watch is turning off by itself while it's placed in the charger. It will not turn off immediately but after few minutes.
Click to expand...
Click to collapse
As I understand it, praddz wants the watch to turn off during a certain time frame, not when charging
If you want the watch to turn off immediately when charging and are willing to enable developer options, for me it works to set the keep screen on option to enabled
At night I just deactivate Screen Alway ON to have screen off while charging. So easy that changing face or other workaround no ? Long press button and just click on screen parameter.
ro_explorer said:
Of course it's working like that, seriously, what have you expected?
If/when the main wear app will allow changing faces remotely via tasker (or it will offer an API for that) then we will be able to do that.
Anyway, my watch is turning off by itself while it's placed in the charger. It will not turn off immediately but after few minutes.
Click to expand...
Click to collapse
Figured I'd chime in that changing faces from the app is confirmed for the Lollipop/Wear 2.0 update rolling out this week. On another note, it would be cool to have the 5.0 notification system integrated into Wear, so things like Quiet Hours, Priority interruptions, etc. Maybe someday.
Am i missing something? My watch automatically turns the screen off when it's on the cradle, after about 10 minutes.
cashisback said:
Am i missing something? My watch automatically turns the screen off when it's on the cradle, after about 10 minutes.
Click to expand...
Click to collapse
I am there with you bud...
I said the same thing...
I was wondering if anyone knew of a way to force night colors in android auto. The day colors look so washed out for some reason and was hoping to just use night colors all day long. Thanks!
And while I am at it, does anyone else think that the traffic symbols in Google Maps is way too thin to see clearly. Would rather have it more like it is on the actual phone.
dogyears said:
I was wondering if anyone knew of a way to force night colors in android auto. The day colors look so washed out for some reason and was hoping to just use night colors all day long. Thanks!
And while I am at it, does anyone else think that the traffic symbols in Google Maps is way too thin to see clearly. Would rather have it more like it is on the actual phone.
Click to expand...
Click to collapse
On my 4100NEX, I have the ability to manually set the night/day mode trigger. It can be auto-triggered by the headlights, or set on a timer. You could probably set it to run on a timer, and set it so it pretty much stays in night mode all of the time.
dogyears said:
I was wondering if anyone knew of a way to force night colors in android auto. The day colors look so washed out for some reason and was hoping to just use night colors all day long. Thanks!
And while I am at it, does anyone else think that the traffic symbols in Google Maps is way too thin to see clearly. Would rather have it more like it is on the actual phone.
Click to expand...
Click to collapse
I messed around with the the settings for a couple days. First, I had it set go into (and out of) night mode at a specific time. Around the same time as sunrise/sunset. Now I just have it set to night mode because I too prefer that setting. It also seems to make the traffic lines more visible. Would be nice if satellite layer was an available option too.
settings/system/dimmer settings/day/night
John
Thanks so much for the replies......I appreciate the support!
Activate developer mode in Android Auto and one of the dev options is to force night mode.
Hi,
I find that the camera really underperforms when inside under artificial lighting - shots seem underexposed. Does anybody know a way of quickly and easily adjusting the brightness of a photo before taking it. For example on an iphone you can touch to focus and then slide the bar to the right of the focus area to adjust brightness.
When touching to focus on the p9 a small "sun" image appears next to the focus point but this disappears almost instantly - i'm not sure if this is meant to stick around for longer so that you can adjust the brightness?
I know that you can hold to focus and then manually adjust the metering point, however this isn't ideal when trying to take a quick photo.
Thanks
You can use the little "sun" icon to adjust exposure on the fly. I've heard somewhere that in certain firmware versions the icon disappears very quickly (just like the little "iris" icon in wide-aperture mode). Maybe pretending that it were there and sliding up and down right next to the focus ring (where the "sun" icon shows up) still works even though the icon already disappeared from your screen. Apart from that, there's an exposure slider in the "Pro" mode, but that's not as convenient as the little "sun" icon.