[Q] GT-S6500D (jenad) problems with WiFi and SD (internal sdcard0) - Samsung Galaxy Mini

Dont stone me if repost, but believe it is not, I honestly tried to study this and other forums for last almost 2 weeks without any results:
I got Mini2 with GB stock ROM and first rooted (using Poot exploit) and upgraded gradually to CWM 6.0.4.5 and CM 10.1 and later CM 11. Didnt discovered any problems except for sdcard0 mount problem as described may times. sdcard0 is not mountable under CWM 6.0.4.5 and CM11 but I think that this can be solved using other threads in this forums, so not a matter here and now, however, it may hint you what is possibly going on. The main thing is, that after trying to experiment with OC kernel, my WiFi always indicates ERROR when trying to switch it on. No matter if in Stock ROM or CM (any version). I tried to reflash Stock and CM (10.1; 10.2 and 11), even repartitioned with ODIN (3.09) and reflashed Stock ROM. No improvement, no change.
Strange thing is, that it was said, that after flashin CM (or CWM not clear now), the offline battery charging does NOT work and phone alway reboots. That can be confirmed by me, but with that exception, that it does NOT work either after reflashing Stock ROM and Stock RECOVERY. Even after this, phone never switches OFF when connected to the charger, just reboots.
I have always did full WIPE (data,cache, format system).
Currently I have Stock ROM 2.3.6
kernel 2.6.38.6-1248583 [email protected] #1 dated Thu Nov 7 20:39:38 KST 2013
Baseband S6500DXXMK1
Recovery reports "Android system recovery (3e)
During last Stock reflash the baseband got upgraded. I am a PC guy, not an Android specialist, but from everlasting WiFi problems and offline charging not working even with Stock ROM and Stock recovery, it looks, like something somewhere got left from my tries with either OC kernel or CWM/CM and prevents Wifi from being switched on. Curently my Stock is rooted so I can get some logs/info anybody can need willing to help/investigate..
Any help or pointers to troubleshooting are highly appreciated as I really love my little cute Mini II.

Alternative
prgbear said:
Dont stone me if repost, but believe it is not, I honestly tried to study this and other forums for last almost 2 weeks without any results:
I got Mini2 with GB stock ROM and first rooted (using Poot exploit) and upgraded gradually to CWM 6.0.4.5 and CM 10.1 and later CM 11. Didnt discovered any problems except for sdcard0 mount problem as described may times. sdcard0 is not mountable under CWM 6.0.4.5 and CM11 but I think that this can be solved using other threads in this forums, so not a matter here and now, however, it may hint you what is possibly going on. The main thing is, that after trying to experiment with OC kernel, my WiFi always indicates ERROR when trying to switch it on. No matter if in Stock ROM or CM (any version). I tried to reflash Stock and CM (10.1; 10.2 and 11), even repartitioned with ODIN (3.09) and reflashed Stock ROM. No improvement, no change.
Strange thing is, that it was said, that after flashin CM (or CWM not clear now), the offline battery charging does NOT work and phone alway reboots. That can be confirmed by me, but with that exception, that it does NOT work either after reflashing Stock ROM and Stock RECOVERY. Even after this, phone never switches OFF when connected to the charger, just reboots.
I have always did full WIPE (data,cache, format system).
Currently I have Stock ROM 2.3.6
kernel 2.6.38.6-1248583 [email protected] #1 dated Thu Nov 7 20:39:38 KST 2013
Baseband S6500DXXMK1
Recovery reports "Android system recovery (3e)
During last Stock reflash the baseband got upgraded. I am a PC guy, not an Android specialist, but from everlasting WiFi problems and offline charging not working even with Stock ROM and Stock recovery, it looks, like something somewhere got left from my tries with either OC kernel or CWM/CM and prevents Wifi from being switched on. Curently my Stock is rooted so I can get some logs/info anybody can need willing to help/investigate..
Any help or pointers to troubleshooting are highly appreciated as I really love my little cute Mini II.
Click to expand...
Click to collapse
Alternatively, can someone direct me to steps to COMPLETELY WIPE EVERYTHING (I mean really everything to the bone and start with STOCK ROM from scratch?
Thanx.

prgbear said:
Alternatively, can someone direct me to steps to COMPLETELY WIPE EVERYTHING (I mean really everything to the bone and start with STOCK ROM from scratch?
Thanx.
Click to expand...
Click to collapse
Use this code:
*2767*3855#
Click to expand...
Click to collapse

What will it do? Need to know before I use it. Cannot afford to **** it up.
Thanks, Ondrej

prgbear said:
What will it do? Need to know before I use it. Cannot afford to **** it up.
Thanks, Ondrej
Click to expand...
Click to collapse
1 google search : https://www.facebook.com/kasmirnewsagency/posts/384662564983666

Related

[Question/Answer] Ask Here !

I am starting this thread, since it seems a lot of users are posting their problems in the Development section. It has become confusing for the other users who are new to this website to post thier queries in other thread. This thread will generally be answered by experienced users and we will continue to help as long as you guys do not create a mess here -:d
My phone have only 11gb internal memory. Is it normal? I though its 16gb phone
Crazy Ushi said:
My phone have only 11gb internal memory. Is it normal? I though its 16gb phone
Click to expand...
Click to collapse
Ya thats normal 11 gb for user...around 2 gigs is for apps...plus rest for system..
New user of a Galaxy Note, I remarked a strange thing with the way the Galaxy Note manage the wifi connexion. At my home, I've one Wifi network. One access point is into my desk and the second into my living room. When I connect my Note on the wifi into my desk room, I got the Wifi at 100% (of course as I'm at 2m of the antenna ;-) ). Now, if I move from my desk to my living room, the Galaxy Note still remain connected to the Wifi of my desk room witch is not good because I lost the 90% of my wifi power.
My question is now: Does it exist any solution to have my Smartphone switching automatically depending on witch room I am ?
For example, with my iPhone and/or iPad, both device automatically use the more powerfull signal (the one of my desk room when I'm in and as soon as I'm more closer of the antenna of my living room it switch to this antenna).
Last information, same problem with a Galaxy S2.
Is it a limitation of Android or a "specificity" of Samsung devices ?
Thx for your feedback !
Force shutdown every time I runs any application
Hello, newcomer's here. I've rooted my N7000 & installed stable CM 10.1.3 ROM, but I can't run any apps more than 10 minutes or less.
When I runs an app (especially games), even when the battery was 100%, the device will force shut. When I immediately turned it on after the
force shutdown, it will force shut at cynogenmod boot screen, but sometimes when I managed to (barely) get in, the battery bar indicates there's
only 1% charge left. So, I thought I should try BatteryCalibration, but still the same issue. Then I thought maybe it's the ROM, so I
installed the updated nightly version CM 10.2 ROM, and the same issue occurs again. I've searched in "All Forums" and found the idea on "wipe
battery stats" in recovery after install new ROM, but I can't find that option in CWM. Then, I read the idea of wiping battery stats has no effect at
all in the battery issue (http://forum.xda-developers.com/showthread.php?t=2256038). So, I flashed the stock ROM back and I didn't
face any issue on force shut and rapid battery drain anymore. But I've found a similar situation faced by other member in this thread
http://forum.xda-developers.com/showthread.php?t=2506468. Do I have to go that far just for remedy?
Is there any solution for this? Because I like custom ROM than using the stock, it's fast and swift RAM usage. Thanks for any advice on this.
Did you try a different battery to start with.?
my N7000 (factory firmware 4.1.2) was in charging, then suddenly its turn off automatically, then i switch on it, it stuck at boot screen..
cannot go recovery mode,
can go download mode with android logo, not ' ! " logo
flash back factory firmware, ordin stuck at boot.bin..FAIL
help
nokiamodeln91 said:
Did you try a different battery to start with.?
Click to expand...
Click to collapse
Nope, I don't have any spare battery for my device. Just bought it 2 weeks ago.
I'll consider your advice. Thanks.
N7000 screen
Hi, I'm not sure wether this is the right thread, but it is a question and I do need an answer..
Does anyone know wether the display of N7000 is the same as SHV-E160L?
I have one N7000 with a broken glass and LCD, and can get hold of a SHV-E160L for same price as the display only.. Would there be a way to frankenstein the LTE possibilities of SHV-E160L into the N7000?
Hope someone has hands on experience with this.. At least the screen part, since it is the main reason for the project..
LTE would be the icing on the cake..
Not sure of the screen but LTE is the compatibly dependent on SOC. The SHV has a snapdragon processor and Exynos doesn't have.
how to disable custom rom flashing twrp recovery? and just stay on cwmr?
First post ever on forum, sorry if i did something bad
You really can't. If the custom rom (may be you are referring to kitkat) comes only with twrp, you need to live with it till some kernel Dev makes a kernel with cwm compatible 4.4.
nokiamodeln91 said:
You really can't. If the custom rom (may be you are referring to kitkat) comes only with twrp, you need to live with it till some kernel Dev makes a kernel with cwm compatible 4.4.
Click to expand...
Click to collapse
Ah, then i get it, thanks for your help!!
Need Help...Plz
nokiamodeln91 said:
You really can't. If the custom rom (may be you are referring to kitkat) comes only with twrp, you need to live with it till some kernel Dev makes a kernel with cwm compatible 4.4.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2559371
Please help me with my problem if you can. My mobile is seen by odin but i am unable to find a Stock Jellybean Rom for N7000, i.e either .tar or .md5 file in internet.
lord_pmvk said:
http://forum.xda-developers.com/showthread.php?t=2559371
Please help me with my problem if you can. My mobile is seen by odin but i am unable to find a Stock Jellybean Rom for N7000, i.e either .tar or .md5 file in internet.
Click to expand...
Click to collapse
Then install philz kernel using odin. Then boot into recovery. Flash any custom rom.
I now got another question, i have the 4.4.1 alysum omni and i just can't get the "standard email"(the one that is original on stock rom) app working, its giving me messages saying i cant login, i took it out from the "removed apks .rar file" and just installed it on new fresh rom, everything else works but not that.. what can the problem be?
its chewing and chewing for like 5 mins when i press next for login.. and then gives error "cant sign in to server"
thanks
Ate you talking about the Samsung Email app? Then it won't work without a TW framework.
My phone got stuck at boot screen and unable to go into recovery mode but can go into download mode.
Should i flash back stock gingerbread via odin? Do i need to i stall any kernel? Pls help.
My phone got stuck at boot screen and unable to go into recovery mode but can go into download mode.
Should i flash back stock gingerbread via odin? Do i need to i stall any kernel? Pls help.
shokokatana said:
My phone got stuck at boot screen and unable to go into recovery mode but can go into download mode.
Should i flash back stock gingerbread via odin? Do i need to i stall any kernel? Pls help.
Click to expand...
Click to collapse
Flash philz .tar file from download mode and you should have working recovery
Sent from my GT-N7000 using Tapatalk

[Q] Stuck in bootloop - What should I do?

Good evening guys!
So I'm stuck in a bootloop, and it doesn't look that I will come out of it. I'm running ROCKET ROM V22, and the Abyss3.9 kernel.
So what do you recomend me to do?
I'll now over the night keep my phone on, to try to get out of the bootloop. But I would need som advice what I shall do.
The problem is that the phone won't mount as a storage device in the computer. And I have no backup in my phone, only on the computer, so I can't restore it easy.
Help me! *said with panic on my voice*
Best regards MinnesotaVikings1961
Hi there,
Bootloops happen every now and then, if something collides or is misconfigured.
In my very own experience most boot loops happen to be script related.
This is why you should´t worry too much.
You still can enter CWM?
If so enter CWM and wipe completely (factory, cache, dalvik) and after that (NO REBOOT!!!) just reflash the ROM which just didn´t happen to work properly.
If it still is in boot loop there might be something wrong with the ROM.
> Rom is guarantied completet? No broken Download?
> Rom is really for the exact telephone model you got? (Galaxy S for example has several submodels which slightly differ from original)
In case you do not have a rooted device without CWM only thing you can do, is to begin from scratch by flashing an official ROM from Samsung via odin.
With that you should flash a kernel with CWM next time, cause it much easier to recover your device including you´ll keep all your private stuff.
Flashing the Samsung-Rom via odin will kill anything saved but the external SD.
hope this helps
# Rodger #
DJ-Tumor said:
Hi there,
Bootloops happen every now and then, is somethine collides or is misconfigured.
In my very own experience most boot loops happen to be skript related.
This is why you should´t worry too much.
You still can enter CWM?
If so Enter CWM, wipe completely (factory, cache, dalvik) and after that (NO REBOOT!!!) just reflash the ROM which just didn´t happen to work properly.
If ist still is in bootloop there might be something wrong with the ROM.
> Rom is guarantied completet? No broken Download?
> Rom is really for the exact telephone model you got? (Galaxy S for example has several submodel which slightly differ from originall)
In case do not have a rooted device without CWM only thing you can do, is to begin from scrath by flashing an official ROM from Samsung via odin.
With that you should flash a kernel with CWM next time, cause it much easier to recover your device incl. you keep all your private stuff.
Flashing the Sasmung-Rom via odin will kill anything saved but the external SD.
hope this helps
# Rodger #
Click to expand...
Click to collapse
Have done as you said, but still problems.
One of the problems maybe can be that it isn't CWM but RedPill.
Yes, I did download the whole file, so no strange abort of the download.
And this is the correct ROM for the Galaxy Note.
If I still have this problems in 24 hours I will contact my store and let them know what I think. I want my money back. I can also add that I'm studying law, so I let the lawbook speek for itself.
But thanks for a fast answer!
Well sad to hear that. Laws have to be different from those in germany
You´re obviously trying to flash inofficial stuff on your own. There is no way the shop could be made resposible for.
So take my advice and reflash official ROM before you return the device.
That will help enormously.
But before runnign too fast, try to give some more information to us here:
What ROM are you trying to flash?
What ROM is installed before trying to flash?
What Kernel is used to flash?
Are you using mobile Odin?
Try to answer questiones I just dind´t think of
DJ-Tumor said:
Well sad to hear that. Laws have to be different from those in germany
You´re obviously trying to flash inofficial stuff on your own. There is no way the shop could be made resposible for.
So take my advice and reflash official ROM before you return the device.
That will help enormously.
But before runnign too fast, try to give some more information to us here:
What ROM are you trying to flash?
What ROM is installed before trying to flash?
What Kernel is used to flash?
Are you using mobile Odin?
Try to answer questiones I just dind´t think of
Click to expand...
Click to collapse
The laws are maybe a little bit diffrent. For example, the first 6 months, the seller or shop needs to prove that the product was working when the sold it. Something that they have very hard to prove.
I'm trying to install the ROCKET ROM V22 for SGN.
I had the MidNote V2.0
The Abyss3.9 kernel (I think that it's the correct way of spelling it).
No, I'm not using mobile Odin.
Edit: Can I install a stocket ROM, with my phone in bootloop, and non mountin as a drive in the computer?
MinnesotaVikings1961 said:
Good evening guys!
So I'm stuck in a bootloop, and it doesn't look that I will come out of it. I'm running ROCKET ROM V22, and the Abyss3.9 kernel.
So what do you recomend me to do?
I'll now over the night keep my phone on, to try to get out of the bootloop. But I would need som advice what I shall do.
The problem is that the phone won't mount as a storage device in the computer. And I have no backup in my phone, only on the computer, so I can't restore it easy.
Help me! *said with panic on my voice*
Best regards MinnesotaVikings1961
Click to expand...
Click to collapse
You need to flash rocket rom v20 before v22 that i belive is or problem if u can mount sdcard to computer u may have to take sdcard out of your phone and put in something else to load the program on the card then put back on phone and then flash v20 of rocket rom and then see if it boots up if it dose then u can flash v22
Sent from my GT-N7000 using XDA Premium HD app
Edit: Can I install a stocket ROM, with my phone in bootloop, and non mountin as a drive in the computer?[/QUOTE]
U could in download mode with odin pc
Sent from my GT-N7000 using XDA Premium HD app
Quick google search shows boot loops are pretty well known with this rom.
No you only can flash original rom with odin.
If there are important data on the device connect it cia usb and boot into cwm.
Now wath what happens. If you´re lucky mass storage mode is enables in the kernel and you got your storage mounted automated.
If not it´s time to cross fingers and search for an option to mount by hand.
I´m completely new to NOTE - all my knowledge comes from my i9000 which is a mega active community compared to the one of the NOTE
There is have the choice between 5 different ICS kernels alone
Each one has it´s abilities, so does one have the option to mount storage by hand.
This option can be found in "advanced". Hope this menu option is present in your rom
good luck!
# Rodger #
MinnesotaVikings1961 said:
The laws are maybe a little bit diffrent. For example, the first 6 months, the seller or shop needs to prove that the product was working when the sold it. Something that they have very hard to prove.
I'm trying to install the ROCKET ROM V22 for SGN.
I had the MidNote V2.0
The Abyss3.9 kernel (I think that it's the correct way of spelling it).
No, I'm not using mobile Odin.
Edit: Can I install a stocket ROM, with my phone in bootloop, and non mountin as a drive in the computer?
Click to expand...
Click to collapse
Yeah you can. Just go to this thread. Get a rootable rom downloaded. Just follow the instructions to the word of how to flash via odin. And you will have stock rom. And you can again root and install custom rom!! No need to run back to store !
Links-
Roms and guide- http://forum.xda-developers.com/showthread.php?t=1424997
Rooting and odin - http://forum.xda-developers.com/showthread.php?t=1329360
Midnote 2, as in ICS Midnote? You couldn't have been on AbyssNote 3.9, because it's a gingerbread kernel.
Perhaps it was Angelom's stock ICS rooted kernel?
Or did you flash AbyssNote 3.9 from Recovery, trying to go back to GB?
chasmodo said:
Midnote 2, as in ICS Midnote? You couldn't have been on AbyssNote 3.9, because it's a gingerbread kernel.
Perhaps it was Angelom's stock ICS rooted kernel?
Or did you flash AbyssNote 3.9 from Recovery, trying to go back to GB?
Click to expand...
Click to collapse
Well, I had been using ICS MidNote for a short time, due to a friend mine wanted to see ICS for the Note.
Now I tried to get back to my regular GB ROM.
/ Jimmy
You have me utterly confused here...What is the latest rom you were on before this bootloop? Midnote 2 or RR 22?
If Midnote 2 (ICS) with Angelom's kernel, and you did a factory reset at some point, there's hardly anything you can do except take your phone to Samsung service. If you had CF--Root ICS kernel, then try to follow this little set of instructions:
http://forum.xda-developers.com/showpost.php?p=22758543&postcount=6
chasmodo said:
You have me utterly confused here...What is the latest rom you were on before this bootloop? Midnote 2 or RR 22?
If Midnote 2 (ICS) with Angelom's kernel, and you did a factory reset at some point, there's hardly anything you can do except take your phone to Samsung service. If you had CF--Root ICS kernel, then try to follow this little set of instructions:
http://forum.xda-developers.com/showpost.php?p=22758543&postcount=6
Click to expand...
Click to collapse
Sorry for being confusing you!
Before this bootloop I was running MidNote V2.0, ICS. I then tried to flash ROCKET ROM, V22. And when I started up, this bootloop came up, and isn't solved in writing moment, very many hours later.
/ Jimmy
Case closed
I can now say that the case is closed. What I did is very simple. In fact, so simple I never thinked about it. The only thing I did was to unroot my phone using Odin.
But thanks for all tips and support!
/ Jimmy

Won't boot after flashing DerTeufel'S [ROM] Jellybean [4.1.1]

Hello,
I tried searching for my problem in the forums but I didn't find my exact setup and don't want to brick my phone. (Well maybe it already is)
I had Cyanogenmod 7 for quite a while and tried the Nightlies for 9 some months ago. In the early days of my phone I used ODIN to flash the newest Stock firmwares and then used the chroot kernel to root my phone and install cwm. Since then I installed Cyanogenmod 7 and later Cyanogenmod 9 Nightlies with cwm recover and there was never a problem.
Today I tried the ROM from DerTeufel1980 http://forum.xda-developers.com/showthread.php?p=28819140
I flashed the rom, the addons, the superuser and google now fix. Then I flashed the kernel Devil3_1.0.0-Rc5_datadata_i9000_CFS_BLN_CMC_20120719.zip and fixed permissions. After that my phone wouldn't boot. The boot animation was the old standard android logo.
I managed to get into Devil Kernel Recovery and thought to try a reflash of just the ROM but when I try to "choose a zip" it always tells me
E:can't mount /sdcard/
After that I flashed the kernel with odin and now the phone seems to boot but veeeery slow and it has a ton of flickering the whole time. The bootanimation is the cyanogenmod 9 boot animation. I got into Devil Recovery and I still can't mount the sdcard. And it seems that it doesn't detect my sim card.
I hope you can help me.
Edit: Actually after rebooting several times the boot sped up and I could get into the ROM. I still can't mount the internal sdcard though and I have no phone functionality. It seems that my IMEI number is gone.
Hey
Downgrade your sgs to 2.3.6 valuepack using odin3...
Then root it and use it for a day atleast..
Then flash CM9 nightly..use that for a day too..
Then flash JB...not the same one u did earlier..
Instead Goto teamjellybean.noez.in (ad www.)
Find d latest version of jb and follow the instruction there..
Cheers
Sent from my GT-I9000 using xda app-developers app
Thanks that's exactly what I have done and it worked.
I've seen a lot of folks saying that they might have bricked their phones when some issue occured while flashing a new rom.
Personally whenever I face issues, I just goto the Download mode and Flash a GB rom and then move my way up (GB --> ICS --> JB).
As long as you can go into Download mode, shouldnt be a problem
Fwiw, I lost my IMEI for the first time trying out the JBs. Not sure if it was Slim or DerTeufel's. I ended up with the kind that allows you to connect to your mobile provider, a fake but working IMEI. But when I saw that I tried to go to GB and it didn't come back automagically. And the IMEI was totally wiped so I couldn't even register on the network. Ended up getting to ICS and only then did Root Browser let me write to the efs folder.
Lesson, in short: make a backup zip of your efs folder (to preserve permissions) and double back it up using Nitrality from the Play store.
Glad you got yours back, too.
sent from a telephonic device
tchindalia said:
Hey
Downgrade your sgs to 2.3.6 valuepack using odin3...
Then root it and use it for a day atleast..
Then flash CM9 nightly..use that for a day too..
Then flash JB...not the same one u did earlier..
Click to expand...
Click to collapse
OK, so I'm *definitely* a crappy speed-reader, because I missed this part about waiting on each version. What does the waiting do? I'm now wondering if that means I need to use the phone and, with the restored /efs folder, sometimes later /dev/block/stl3 will repopulate itself with the proper info.
Hey
I asked to wait on roms coz it can just make a few things working...like data..if it doesnt work on 1 rom it would not (probably) work on the next update..(personal experience)..
Cheers
If my post helped, don't mind hitting the Thanks button..

Can't boot CyanogenMod 9 on Motorola Milestone!

Hey guys, I'm having a problem
Sorry if I'm posting this in a wrong area
Well, I'm using CyanogenMod 7.2.0 stable by Kabaldan for Milestone A853. Then I tried to install CyanogenMod 9 Nightly (from Skrilax build bot), the latest version. Everything was going well, then when I tried to boot, a screen about "Android is updating applications" appeared, and then after updating, the phone hard rebooted, back to the M logo. Then I left it booting again, and it rebooted again, though this time the update screen didn't appeared. Sometimes I get the first screen to appear, but I can't even touch the phone because it reboots before I try to do so. I tried installing CyanogenMod 10 (Skrilax nightly build bot again) and the same error happened! What is happening to my phone? I've never found anyone with this problem
Please help me! Thanks.
Did you perform a full wipe before applying CM9/10?
Eiertschik said:
Did you perform a full wipe before applying CM9/10?
Click to expand...
Click to collapse
If by full wipe you mean the three wipe options in OpenRecovery (Dalvik, Data and Cache) then yes. I even deleted the /system folder and nothing!
UPDATE: I tried to install CM10, removed system, data and cache through ADB and dalvik cache, installed CM10 and gapps. When booting, the first screen asking for language rapidly appears, and reboots. I tried to boot again, then I rapidly touched the screen when the screen appeared, and it didn't reboot! Well, that's better, but CM10 is too lagged for daily use, that's why I want to install CM9!
I'm using CM10 from couple of days..
I get enough RAM to run apps that I daily use...check for unwanted apps that are not being used, disable it through hwa setting app. Just use it for a day .. IMO CM10 is better than CM9.
BTW I removed gtalk, maps, email, exchange service and other unwanted apps from OR...which I don't use at all..
Sent from my Milestone using xda app-developers app
Hell Angel 1910 said:
Hey guys, I'm having a problem
Sorry if I'm posting this in a wrong area
Well, I'm using CyanogenMod 7.2.0 stable by Kabaldan for Milestone A853. Then I tried to install CyanogenMod 9 Nightly (from Skrilax build bot), the latest version. Everything was going well, then when I tried to boot, a screen about "Android is updating applications" appeared, and then after updating, the phone hard rebooted, back to the M logo. Then I left it booting again, and it rebooted again, though this time the update screen didn't appeared. Sometimes I get the first screen to appear, but I can't even touch the phone because it reboots before I try to do so. I tried installing CyanogenMod 10 (Skrilax nightly build bot again) and the same error happened! What is happening to my phone? I've never found anyone with this problem
Please help me! Thanks.
Click to expand...
Click to collapse
If nothing solves your problem, you should reflash the SBFs and start all over again. I had to do this sometimes. Formatting the SDCard (after backing-up your personal data) also helps to prevent this from ocurring.
Well, never mind, I was robbed saturday. Thanks for the help folks
Sad! But it's a chance to get a better phone. Good luck!
Tiago Costa said:
Sad! But it's a chance to get a better phone. Good luck!
Click to expand...
Click to collapse
Really sorry to know that you have said goodbye to your great milstone... Anyway, I'd like to share what I did when I was in your situation:
- Flash the stock ROM to come back to stock 2.1
- Erase and format SD card
- Partion the SD card angain
- Root the fone and flash to the latest CM10
And now, my stone works like a charm and I have not yet to have idea to change to a new phone now :victory:
Just for sharing!
justforlove said:
Really sorry to know that you have said goodbye to your great milstone... Anyway, I'd like to share what I did when I was in your situation:
- Flash the stock ROM to come back to stock 2.1
- Erase and format SD card
- Partion the SD card angain
- Root the fone and flash to the latest CM10
And now, my stone works like a charm and I have not yet to have idea to change to a new phone now :victory:
Just for sharing!
Click to expand...
Click to collapse
and BPSW for 2.1.1 is needed? or optional?
It's optional.
You only have to wipe data,dalvik-cache and data (you will lose all your information, so backup everything) and to create an ext partition on your sdcard.
Erovia said:
It's optional.
You only have to wipe data,dalvik-cache and data (you will lose all your information, so backup everything) and to create an ext partition on your sdcard.
Click to expand...
Click to collapse
yeah I know, I read the dev thread but can't make replies there. I am now on CM10 from 09/24 (last 4.1.1) and considering about CM10 4.2 but I was little bit confused about BPSW. And will there be problem If I will uprgade from 2.2? Because I don't have nandroid backup of 2.1
(FYI, the current CM10 is based on Android 4.1.2.
4.2 will be the next version of Android and probably CM11 will be based on it.)
Anyway, i upgraded from 2.2 to 4.0.4 and then to 4.1.1 and now 4.1.2.
I believe you can upgrade from 2.2 to 4.1.2 without any problem.
(but always make a nandroid before upgrading)
Yes, it's perfectly possible upgrade from 2.2 Stock ROM, although it's more difficult to root it.
I did it without any problems.
Is there any difference between upgrading from 2.1 or from 2.2?
Erovia said:
(FYI, the current CM10 is based on Android 4.1.2.
4.2 will be the next version of Android and probably CM11 will be based on it.)
Anyway, i upgraded from 2.2 to 4.0.4 and then to 4.1.1 and now 4.1.2.
I believe you can upgrade from 2.2 to 4.1.2 without any problem.
(but always make a nandroid before upgrading)
Click to expand...
Click to collapse
Yeah, sorry for that mistake, my fault. I upgraded from 2.2 to 4.0.4 and now I have 4.1.1. I tried to upgrade to 4.1.2 from 4.1.1 but it was laggy (10/16 and 10/17) so I restore it back to 4.1.1 which is pretty stable and I will wait to better time for this upgrade, because it is my main phone and my boss is upset when I am not available when he calls me
Tiago Costa said:
Yes, it's perfectly possible upgrade from 2.2 Stock ROM, although it's more difficult to root it.
I did it without any problems.
Is there any difference between upgrading from 2.1 or from 2.2?
Click to expand...
Click to collapse
I've read somewhere, that one must upgrade to 2.2 because upgrading from 2.1 will cause problem with some hardware module.
zemko said:
Yeah, sorry for that mistake, my fault. I upgraded from 2.2 to 4.0.4 and now I have 4.1.1. I tried to upgrade to 4.1.2 from 4.1.1 but it was laggy (10/16 and 10/17) so I restore it back to 4.1.1 which is pretty stable and I will wait to better time for this upgrade, because it is my main phone and my boss is upset when I am not available when he calls me
Click to expand...
Click to collapse
Kabaldan is working on it. It seems, if the CPU's clockspeed is under 600MHz, then something is wrong with the GPU performance. (So you should consider using Performance CPU governor.)
Erovia said:
Kabaldan is working on it. It seems, if the CPU's clockspeed is under 600MHz, then something is wrong with the GPU performance. (So you should consider using Performance CPU governor.)
Click to expand...
Click to collapse
I know that someone wrote it in dev thread for CM9 or CM10, but my battery is pretty weak, I am glad that with Juice defender it lasts for 12 hours and Performance governor is pretty aggressive to battery drain. Anyway thanks for answering my nooby questions

[Q] VERY worried about flashing miui rom and new bootloader.

I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Jeffril said:
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Click to expand...
Click to collapse
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
NoDze said:
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
Click to expand...
Click to collapse
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Jeffril said:
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Click to expand...
Click to collapse
Okay, This is SFSP by @sgspluss which is a pretty fast, stable and battery-friendly slimmed down version of stock ICS. It is available for both Old and NewBL, so you might want to try that first. This is AIO Toolkit. I know that you've used it and bricked your phone, but try again, and for the love of God install the nvflash drivers because most people skip that part. You have to do it manually and if you're running Windows 8 you need to disable Driver Signature Verification. But yeah, you switch bootloaders with this.

Categories

Resources