Related
Hello,
I have some problems trying to flash my XZ. I'm using Xperia Flashing Tool 0.9.10.2 beta6 on Windows 8 x64 and whenever I try to flash my XZ flashing tool "gets stuck at "Device connected in flash mode" message after which it gets reconnected and if I try again same thing will happen.
So my question is, am I doing something wrong and if so, please advise.
Bluffer said:
Hello,
I have some problems trying to flash my XZ. I'm using Xperia Flashing Tool 0.9.10.2 beta6 on Windows 8 x64 and whenever I try to flash my XZ flashing tool "gets stuck at "Device connected in flash mode" message after which it gets reconnected and if I try again same thing will happen.
So my question is, am I doing something wrong and if so, please advise.
Click to expand...
Click to collapse
have you correctly installed the drivers for it, connect phone in flashmode and does windows drivers load, also in flashtool go to devices>conected devices and what does it say
Maddhouse said:
have you correctly installed the drivers for it, connect phone in flashmode and does windows drivers load, also in flashtool go to devices>conected devices and what does it say
Click to expand...
Click to collapse
I think drivers are installed fine. Screenshot is below.
no doesnt look it, under ADB devices there is no device, Reinstall drivers and try again. Try the way in my sig for win 8
Unfortunately same thing happens - check screenshot below.
Bluffer said:
Unfortunately same thing happens - check screenshot below.
Click to expand...
Click to collapse
thats better you now have a ADB device installed, you should now be able to put your phone into flashmode
power off your phone with usb diconnected, hold vol down and reconnect turned off phone to usb and you should now get green led and flashtool will say device connected in flashmode but you only have about a min in flashmode before phone reboots
Thank you for your help and effort but even now it keeps disconnecting device. I don't know where the problem is, maybe I'm not doing something as I should.
This is the procedure I was trying:
1) I select Flash device in flash tool
2) I select Flashmode mode
3) I choose which firmware to flash and click Flash so flash tool can start it's magic
4) When flash tool shows message that I can remove my device from USB and turn it off I do so
5) I also press volume down and reconnect the device with the PC.
6) Problem happens here
what about if flashtool isnt ready to flash file, does flashtool pick it up (4 and 5)
it will say device connected in flashmode with green led
Yeah, it does pick it up and displays a message "Device connected in flash mode" and after awhile "Device disconnected".
Bluffer said:
Yeah, it does pick it up and displays a message "Device connected in flash mode" and after awhile "Device disconnected".
Click to expand...
Click to collapse
good yer i think its about a min, now try and download another FTF file
part 1
part 2
that works i have got loads of people to flash that
edit: i made it so its self extract version then there is a FTF file for flashtool
As you suggested the problem was in faulty FTF. It's working like a charm now!
Thank you once again!
Bluffer said:
As you suggested the problem was in faulty FTF. It's working like a charm now!
Thank you once again!
Click to expand...
Click to collapse
Good Good, What wasnt helping was you didnt have drivers installed aswell, now you just have to root and your sorted :highfive:
hey i m having same with my x8 after i accidently kept stock rom for nalf kernal... nw i m nt able to open cmw in phone...plz help..
Hello everyone!
My Xperia T LT30P is stuck at "device encrytion failed please reset" everytime I turn it on. The "Reset Device" button on this screen doesn't do anything when tapped.
I tried to flash 7.0.A-Global firmware via Flashtool but it always gets stuck here at 0%:
21/009/2013 12:09:46 - INFO - Loader : S1_Root_7054 - Version : R5F001 / Bootloader status : ROOTABLE
Is there anything else I should try?
Thanks a lot for reading.
flash a latest version of JB,
or better yet, install PCCompanion (Just google it) and repair your phone that way
sikander3786 said:
Hello everyone!
My Xperia T LT30P is stuck at "device encrytion failed please reset" everytime I turn it on. The "Reset Device" button on this screen doesn't do anything when tapped.
I tried to flash 7.0.A-Global firmware via Flashtool but it always gets stuck here at 0%:
21/009/2013 12:09:46 - INFO - Loader : S1_Root_7054 - Version : R5F001 / Bootloader status : ROOTABLE
Is there anything else I should try?
Thanks a lot for reading.
Click to expand...
Click to collapse
did you try Phone Repair option in PC Companion?
Thanks for your replies.
I have also tried LT30p_9.1.A.1.140_CE_Skyfall.ftf but same result. I have also tried different versions of flashtool.
PC Companion can't detect my phone. I have tried 2 different computers and each one is stuck on install MTP drivers. I guess unless the drivers are installed, PC companion won't detect it.
I have also tried connecting the phone in flash mode but PC companion asks to restart the phone in normal mode.
run the driver.exe file in the flashtool installation folder.
choose fastboot, flashmode and tx drivers
try again with pccompanion
gregbradley said:
run the driver.exe file in the flashtool installation folder.
choose fastboot, flashmode and tx drivers
try again with pccompanion
Click to expand...
Click to collapse
PC companion still can't detect the phone. I have installed/re-installed all the drivers you mentioned.
As Flashtool isn't able to flash the .ftf firmware to the phone, is there any other firmware available that can be flashed via fastboot?
No.
Try downloading Sony's EMMA program and repairing with that
Sent whilst sat on the toilet.
gregbradley said:
No.
Try downloading Sony's EMMA program and repairing with that
Sent whilst sat on the toilet.
Click to expand...
Click to collapse
Thanks for your suggestion.
Seems like EMMA only works with unlocked bootloaders. And my Xperia T can't be unlocked as USB debugging is off and there is no way I can turn it back on.
Further help needed, please.
Sorry for this thread.
MY ENGLISH NOT GOOD. :crying:
I Follow " http://forum.xda-developers.com/showthread.php?t=2392865 ".
1. Flash 10.1.1.A.1.310 with all Wipes using flashtools (All data will be erased.)
2. Obtain Root using the toolkit.
3. Flash this Recovery to your device.
4. Download the System only Rom and put it on the sd-card.
5. Go into Recovery (when the press "Volume up" when the blue LED lights up)
6. Search for the previously downloaded System only Rom file and flash it in CWM recovery .
7. Boot into flash mode (when booting from USB-connected cable to press "Volume down")
8. Flash 10.3.1.A.0.244 through FlashTool without system (tick the box Exclude) / / After loading you will have the new firmware./ /
9. Flash Recovery again.
10. Download the latest version SuperSU (at the bottom of the link to the zip file), add this file to the sd-card.
11. Go into Recovery, flash the archive SuperSU / / After loading you will have the new firmware with the normal working Root privileges./ /
I have proplem with step 7 and 8.
In step 6. I setup Rom from SD Card and reboot and Unplug the device.
When My phone Reboot. I open Flashtool -> Selec Firmware Russ 10.3.1.A.0.244 -> UnTick DATA, CACHE, APPSLOCK and tick all the box Exclude -> Click Flash -> Press Volume down my phone + Plug USB cable with Laptop -> When Flash Finish, Unplug device and press PoWer .... My phone die on LOGO sony.
Help me PLS.
IF Thread not post here, i sorry admin. => New member.
Anyone help me..?
Help me pls..!!!!1 :crying:
SonyZR said:
Help me pls..!!!!1 :crying:
Click to expand...
Click to collapse
I also tried to follow the instructions above and now phone is dead!
Does not start up , not even sony logo.
Please help.:crying:
Normal
jackman17 said:
I also tried to follow the instructions above and now phone is dead!
Does not start up , not even sony logo.
Please help.:crying:
Click to expand...
Click to collapse
Step 1 : Open your Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
2 : Now, You Hold Volume Down and conection cable with ur computer. ( If your computer search driver for your phone, Flashtool will be error, but your computer has driver your phone )
3: Close table flashtool and unplug cable.
4: Open again Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
5: One moretime Hold Volume Down and conection cable with ur computer. Your computer will be flash FW on your phone =>
6 : When finish , unplug cable and hold power. => Done
Sorry. my english not good.
SonyZR said:
Step 1 : Open your Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
2 : Now, You Hold Volume Down and conection cable with ur computer. ( If your computer search driver for your phone, Flashtool will be error, but your computer has driver your phone )
3: Close table flashtool and unplug cable.
4: Open again Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
5: One moretime Hold Volume Down and conection cable with ur computer. Your computer will be flash FW on your phone =>
6 : When finish , unplug cable and hold power. => Done
Sorry. my english not good.
Click to expand...
Click to collapse
My phone does not not boot up, it is not recognised by FlashTool anymore.
When I push power button , only red led at the bottom of phone blink a couple of times en then nothing.
Is there any other way.?
Yes.
jackman17 said:
My phone does not not boot up, it is not recognised by FlashTool anymore.
When I push power button , only red led at the bottom of phone blink a couple of times en then nothing.
Is there any other way.?
Click to expand...
Click to collapse
Do you have try my tutorial.?
If my tutorial not success
And you can not login logo sony
I think your phone has brick. You need go to warranty center.
tried your tutorol, but fkashtool does not see phone when connect.
I think I have to buy new one.:crying:
jackman17 said:
tried your tutorol, but fkashtool does not see phone when connect.
I think I have to buy new one.:crying:
Click to expand...
Click to collapse
Pull your battery out. Run the flashtool, click the lightning button and flash in fastboot (the first option) and then select the ftf file for 4.1.2 or 4.2.2 (there's a thread in the development section with the FTF files).
Flash (and leave the boxes as they are ) --> Once it prepares the phone for flashing, it will ask you to to connect the phone in fastboot mode.
DONT TOUCH THE POWER BUTTON
Hold the volume down button while plugging in the cable. It should flash.
Let me know if it worked.
djpeesh said:
Pull your battery out. Run the flashtool, click the lightning button and flash in fastboot (the first option) and then select the ftf file for 4.1.2 or 4.2.2 (there's a thread in the development section with the FTF files).
Flash (and leave the boxes as they are ) --> Once it prepares the phone for flashing, it will ask you to to connect the phone in fastboot mode.
DONT TOUCH THE POWER BUTTON
Hold the volume down button while plugging in the cable. It should flash.
Let me know if it worked.
Click to expand...
Click to collapse
fastboot is the second option in my flashtool menu, which should i choose?
ps and should I leave battery out?
THANK YOU DJpeesh,
you saved my day:fingers-crossed::fingers-crossed:
followed your instructions ( 1e option flashmode with battery still removed ) an successfuly flashed phone.
I think it went wrong when I flashed boot.img file from cmw recovery with fastboot from cl when phone was also still connected throw Flashtool.
I use all linux tools (flashtool, adb, fastboot , doomlord-rooting kit)
ps By your opinion, is it still save to follow intructions on the link in my first post to get my xperia zR on latest firmware and have root access?
Jackman17. Try updating through Sony update service and then use vroot (can send you thread link later).
I'm running 4.2.2 and I'm rooted.
Sent from my C5502 using Tapatalk 4
I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally corrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
wmiswm said:
I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally disrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
Click to expand...
Click to collapse
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1~2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
YudiA1 said:
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1~2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you very much for your reply. But I am already using the PC Companion repair option, and the response is as stated above.
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Reply
wmiswm said:
I cannot use flashtool to flash the stock rom back because usb debug mode is off
Click to expand...
Click to collapse
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
gm007 said:
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
many thanks, done.
shysparrow said:
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
Click to expand...
Click to collapse
yes, you are right. Yesterday I check everything on the right panel and it does not work. Today I leave all option unchecked and flash properly. Many thanks anyway.
maxam73 said:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
Click to expand...
Click to collapse
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
wmiswm said:
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
Click to expand...
Click to collapse
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
maxam73 said:
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
Click to expand...
Click to collapse
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
YudiA1 said:
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Solved...j know that phones must be off, the problem was flashtool, j used other version (beta 4) on other pc running xp instead of win7 and all goes good.
Thanks to all for helping me
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
theVenerable said:
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
Click to expand...
Click to collapse
The above didn't work for me because I received error based on my type of phone.
This guide however did help: http://forum.xda-developers.com/showthread.php?t=2240614
I had to reboot windows to a settings to enable unsigned drivers. Installed Flashtool and it's drivers,
First unlocked the bootloader(BLU button, got the IMEI, used the sony form (http://unlockbootloader.sonymobile.com/instructions))
Then I downloaded the stock sony xperia z ftf image, placed it in Flashtool's firmware folder, then flashed it (flash device > flash mode).
Now my phone's working again.
HTH,
George
brick,unbrick,xperia z problem,flashtool
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
shayanster said:
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
Click to expand...
Click to collapse
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
visualfighter said:
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
Click to expand...
Click to collapse
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
shayanster said:
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
Click to expand...
Click to collapse
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
androidtweaker1 said:
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
Click to expand...
Click to collapse
when it is connected into flashmode the computer showing error your USB not recognized
shayanster said:
when it is connected into flashmode the computer showing error your USB not recognized
Click to expand...
Click to collapse
Is it Windows 7 or 8?
I flashed my Xperia SP with from Jellybeam to CM13 rom. I didn't create any backup, wiped clean everything including cache using twrp recovery. While the setup installed CM13 without any error but I downloaded the wrong gapps and the setup didn't accept those. So I chose to reboot the cell and since then it just stopped responding. Although it is showing the green led while plugged in via USB, it won't start in neither fastboot nor recovery mode.
I'm stuck here and have no idea what to do.
I tried installing PC companion, flashtools, SP flashtools, emma, everything. None of these detect my cell. I'm using Windows 10 (64 bit) and am at a dead end.
Any help would be appreciated.
UPDATE:
I managed to flash it with errors and now it's stuck in a SONY logo bootloop. Its starts, shows SONY logo for a while and then turns off again. Again it's not getting recognised by any flash tool, sony companion etc.
Help please.
Disable driver enforce on windows 10
Install driver fastboot and viskan driver
Use xperia flashtool, and flash stock rom ftf
hafizhlf said:
Disable driver enforce on windows 10
Install driver fastboot and viskan driver
Use xperia flashtool, and flash stock rom ftf
Click to expand...
Click to collapse
Installed the driver and flashed it with a rom but it's still stuck on the SONY logo. One more thing, It's bootloader wasn't unlocked when I messed up at the beginning. What can I do to save my phone?
goatface17 said:
Installed the driver and flashed it with a rom but it's still stuck on the SONY logo. One more thing, It's bootloader wasn't unlocked when I messed up at the beginning. What can I do to save my phone?
Click to expand...
Click to collapse
Unlock first
Use flashtool to unlock bootloader
Boot to fastboot > unlock bootloader using flashtool > enter unlock code
hafizhlf said:
Unlock first
Use flashtool to unlock bootloader
Boot to fastboot > unlock bootloader using flashtool > enter unlock code
Click to expand...
Click to collapse
Whether I try to flash it or unlock, phone boots up before the process is completed. I'm completely stumped here.
Hi! Still have the problem? I faced the same two days ago when I tried to change the on on my SP. But finally I could save the Phone by searching a bit on the net. Pls tell me if matter is still on and I try to translate the steps to english.
NagyAti said:
Hi! Still have the problem? I faced the same two days ago when I tried to change the on on my SP. But finally I could save the Phone by searching a bit on the net. Pls tell me if matter is still on and I try to translate the steps to english.
Click to expand...
Click to collapse
Yes, still stuck there. Can't flash it because phone boots mid-process and flashing aborts. Please help me out here.
goatface17 said:
Yes, still stuck there. Can't flash it because phone boots mid-process and flashing aborts. Please help me out here.
Click to expand...
Click to collapse
Hey!
Sad to hear, but maybe (I hope) this method will help you. Basically what you will get is an original Xperia SP with 4.1 android as it came from the factory.
You will need:
1. Sony Mobile Flasher by Androxyde" version 0.9.18.6. Don't know if newer version came or better. You can find it here in forums. http://forum.xda-developers.com/showthread.php?t=2489955
2. The basic ROM "12.0.A.2.254".
The method that helped me:
SP turned off. Cable not connected.
Start Sony Mobile Flasher (Flashtool) , give administrator rights.
Top left cornet click on the bolt and choose flashmode, then in firmware selector you can find and select the downloaded ROMs and kernels. Choose the official 4.1 (12.0.A.2.254). Click falsh so it starts to proceed.
Then a windows appears called "wait for flashmode".
Now. Grab your turned off SP press volume down and connect the usb to pc. Keep holding volume down button till flashtool starts to upload the system. (Hopefully it will be fast enough, and phone will not turn on. For me it was)
After flashtool is finished you will see:
09:50:53 - INFO - Flashing finished.
09:50:53 - INFO - Please unplug and start your phone
09:50:53 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
09:50:54 - INFO - Device connected in flash mode
Unplug and start the SP
If everything went as planned you have your phone back with stock 4.1 and 12.0.A.2.254 kernel.
you can find the firmwares here: https://mega.nz/#F!1xME0bZB!lGvex2Gc3cZFr3NoEFFWww!hgN3GBAC
NagyAti said:
Hey!
Sad to hear, but maybe (I hope) this method will help you. Basically what you will get is an original Xperia SP with 4.1 android as it came from the factory.
You will need:
1. Sony Mobile Flasher by Androxyde" version 0.9.18.6. Don't know if newer version came or better. You can find it here in forums. http://forum.xda-developers.com/showthread.php?t=2489955
2. The basic ROM "12.0.A.2.254".
The method that helped me:
SP turned off. Cable not connected.
Start Sony Mobile Flasher (Flashtool) , give administrator rights.
Top left cornet click on the bolt and choose flashmode, then in firmware selector you can find and select the downloaded ROMs and kernels. Choose the official 4.1 (12.0.A.2.254). Click falsh so it starts to proceed.
Then a windows appears called "wait for flashmode".
Now. Grab your turned off SP press volume down and connect the usb to pc. Keep holding volume down button till flashtool starts to upload the system. (Hopefully it will be fast enough, and phone will not turn on. For me it was)
After flashtool is finished you will see:
09:50:53 - INFO - Flashing finished.
09:50:53 - INFO - Please unplug and start your phone
09:50:53 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
09:50:54 - INFO - Device connected in flash mode
Unplug and start the SP
If everything went as planned you have your phone back with stock 4.1 and 12.0.A.2.254 kernel.
you can find the firmwares here: https://mega.nz/#F!1xME0bZB!lGvex2Gc3cZFr3NoEFFWww!hgN3GBAC
Click to expand...
Click to collapse
Thanks a lot brother. At first it didn't work when I flashed it with the latest version of Flasher. Then I installed the exact version you mentioned (0.9.18.6) and phone didn't boot during the flashing and now it's back to normal with the default 4.1 stock.
Thanks a bunch, you're a life saver for me. :highfive: