Related
I've recently brought a new car stereo and bluetooth gateway - both of which connect to my G1 fine, however...
When I connect them (e.g. when they switch on, as both connect automatically), it starts the music player on my phone playing a random track!
This is becoming very annoying, as I typically listen to Podcasts, not music. So my question...
Is there anyway to stop this happening?
And/or automatically start BeyondPod to be the app that launches on a bluetooth connection?
Note: Am running Cyan 4.0.2 on G1, with JG-Cyan theme (default music player, with slightly different skin).
I am wondering if there is a way to stop this also. I have a Ford with the Sync system and when I call someone there will be music playing in the background until I shut off the music player. lol.
Mine is straight with the JVC KW-NX7000BT head unit. What are your guys spec? Are you rooted? What rom? And do you have the newest radio?
supremeteam256 said:
Mine is straight with the JVC KW-NX7000BT head unit. What are your guys spec? Are you rooted? What rom? And do you have the newest radio?
Click to expand...
Click to collapse
Not sure what you mean by 'Mine is straight'.
My head unit is a Clarion FB289, connecting to a rooted G1 with Cyan 4.02 Rom (with JG-Cyan Theme). As far as I'm aware I have the latest radio.
As the problem/action happens with two different BT devices, gotta be something to do with the phone/ROM (?)
smccaldin said:
Not sure what you mean by 'Mine is straight'.
My head unit is a Clarion FB289, connecting to a rooted G1 with Cyan 4.02 Rom (with JG-Cyan Theme). As far as I'm aware I have the latest radio.
As the problem/action happens with two different BT devices, gotta be something to do with the phone/ROM (?)
Click to expand...
Click to collapse
When I said mine is straight just meaning mine doesn't act in the way you guys are having. Go to your settings on your phone and go to about phone and look what your baseband says. Most likely you prolly do have the newest radio but you just wanna check. Without having the newest radio you can run into BT problems.
It has done it not rooted, rooted with JF 1.5, cyan's 3.6.8.1 through 4.02, Hard and the 1.33.2005 SPL, always the latest Radio.
I guess it is the BT device.
New Development
I'm mainly using BeyondPod to listen to podcasts (go figure...).
But was playing with the settings following the last update, I realised that the 'enable headset buttons' wasn't 'on'.
Since switching it on, when I connect to bluetooth devices, it starts up BeyondPod, rather than the music player...
... better for me, would be nice if nothing happened!
+2 year old thread - same problem. Still. It's kinda funny, but then again it's really, really frustrating.
On the same token, cars usually request access to the contact list - and I've found that the phone allows this even if I don't explicitly allow it. If I happen to look at the phone right when the car system makes this request, I can see the notification and I get to "Allow" or "Cancel". But if I don't do anything, it automatically allows it. What gives?
This has to be a flaw of Android. It's a HUGE security risk too. I use rental cars frequently when I travel and I really don't want to give all my contact data to a car that has a new driver every other day or so.
I have a Motorola Atrix btw, not an HTC Dream. Maybe a mod could move this to a general Android forum.
smccaldin said:
I've recently brought a new car stereo and bluetooth gateway - both of which connect to my G1 fine, however...
When I connect them (e.g. when they switch on, as both connect automatically), it starts the music player on my phone playing a random track!
This is becoming very annoying, as I typically listen to Podcasts, not music. So my question...
Is there anyway to stop this happening?
And/or automatically start BeyondPod to be the app that launches on a bluetooth connection?
Note: Am running Cyan 4.0.2 on G1, with JG-Cyan theme (default music player, with slightly different skin).
Click to expand...
Click to collapse
If this does not work try the solution below. I just went out and trouble shooted with my radio. Seems like when I make the pair from the phone to radio I have the problem. When I make the pair from the radio to the phone its a non issue. The first phone I paired was my Galaxy note I went into the radio settings and searched for my phone; paired the phone and it maintains the connection perfect. When I switch between cd, aux and BT audio the phone stays connected. Calls come in voice switches to speaker and then after call if music is playing it resumes via what ever method it was playing pre call. ie CD, FM/AM or media app (pandora).
On my GS2 I tried making the connection from the phone first. ie making the phone seek the radio's BT signal. This is where I had problems. The stock music app would start after every call. ie send or recieve. I also got the annoying music starting everytime the device reconnected. ie the phone would dissconect everytime I switched the radio's input method between cd, aux or bt.
Soulution 1) Make the pair from your head unit and not the phone. Temporairly set your phone to visible and make the pair that way.
Solution 2) Headset block. Stops unwanted headset controls. In this case play on connect. Just remember to open app and hit the toggle button to on on your first use. found in the Play Store.
Solution 3) More of a work around. Media Button Router : App that lets you select what app you want to auto open on BT audio connect, or you can have it just display choices and cancel them out when you turn on the screen.
Both work well with the first being the better of the 2, but the second addresses you secondary criteria "or automatically start BeyondPod to be the app that launches on a bluetooth connection".
I think its solved now my this thread RIP. It frustrated the heck out me, but nowhere actually had a solution. Hope it does not come back in 4.0.
hi
Well Dec 2012 and I am still struggling with this...
I have a Subaru and a Subaru Factory radio with BT streaming. I cannot do "solution 1" as the car stereo does not have option to search for available devices.
The problem I have is not only the above but more...
0. I have the XXLSJ based Neatrom (Jelly Bean) on my galaxy S2
1. It automatically launches either "Power Amp" or the default JB music player. (earlier it used to do Power Amp, but lately it is doing the JB player)
2. I have switched off bluetooth controls in PowerAmp.
3. There is no option for switching off bluetooth in the default JB music player.
After I start the car, I usually switch on "google listen" and the try to play the podcast I want to hear,
next it starts playing and in a secon or two gets muted, (as some music app tries to autolaunch I guess)
then I do vol+ or vol- on the car stero and it starts playing the podcast, and then the phone freezes (hence it mutes again)
and I get a message "poweramp force closed" at this time if I am luck the bluetooth connection stays or sometimes
it resets, and then I have to go through the procedure again!
If I am lucky the bluetooth stays and I am able to listen to the podcast...
If I use the seek+ or seek- buttons on the car I can switch podcasts which is fine, but the Meta-tags shown on the screen are
not of the podcasts, they are still comming from poweramp. If I hit vol+ and vol- on the PHONE (not the car) then the meta-tags
switch to the next or previous song. Note that as the metatags switch I am still listening to 'google listen' and not poweramp.
I would have liked this to work cleanly.. but well...
G
I recently installed a new head unit in my car, Kenwood DDX470, which I believe is compatible with the revolution. The phones bluetooth connects and allows the track controls to control music, both on spotify and all access. I switched from spotify to all access because there was a 4 steps process that had to be followed in order to successfully sync the bluetooth, and because I heard that spotify was not necessarily very compatible with android devices, and because I heard that all access might show the track information once linked up. I'm pretty sure the phone has the ability to transmit metadata, track info, because it does so no problem with music stored on the device, but unfortunately it does not do so when streaming through all access or spotify.
I saw that there is a link to install a 3rd party app for the samsung SG3 and tab but it didn't work for my phone. I've talked to all access support, lg support, best buy, and verizon, and there appears to be no solution. I know that transmitting metadata is possible while streaming, since my brother is able to transmit this information on his iphone for both music streaming subscriptions. I'm, assuming this has something to do with the blue tooth stack of the phone, but I really don't know. Any insight into this problem would be great. I travel a lot for work and am a bit of an audiophile and this is the last problem I am having getting the system linked up properly. Hopefully one of the genius' at xda will have a solution. Thanks!!
christhorpeIM said:
I recently installed a new head unit in my car, Kenwood DDX470, which I believe is compatible with the revolution. The phones bluetooth connects and allows the track controls to control music, both on spotify and all access. I switched from spotify to all access because there was a 4 steps process that had to be followed in order to successfully sync the bluetooth, and because I heard that spotify was not necessarily very compatible with android devices, and because I heard that all access might show the track information once linked up. I'm pretty sure the phone has the ability to transmit metadata, track info, because it does so no problem with music stored on the device, but unfortunately it does not do so when streaming through all access or spotify.
I saw that there is a link to install a 3rd party app for the samsung SG3 and tab but it didn't work for my phone. I've talked to all access support, lg support, best buy, and verizon, and there appears to be no solution. I know that transmitting metadata is possible while streaming, since my brother is able to transmit this information on his iphone for both music streaming subscriptions. I'm, assuming this has something to do with the blue tooth stack of the phone, but I really don't know. Any insight into this problem would be great. I travel a lot for work and am a bit of an audiophile and this is the last problem I am having getting the system linked up properly. Hopefully one of the genius' at xda will have a solution. Thanks!!
Click to expand...
Click to collapse
First off, the iphone is a whole other animal when it comes to car audio. You cannot compare what you do with an apple product in your car to any other device. Period. Now, second, I have never been able to get meta data to show through bt on the revo. I have had this phone for 2 christmas's and can't recall ever seeing meta data displayed.
Pandora and Spotify work absolutely flawless on my wifes jvc w/o metadata. You could try and search the playstore for a manufacturer app for the radio. I know pioneer, jvc, sony have them. See if that helps. But most likely, you will have to upgrade your phone to get that to work.
I've been a car audio installer for over 10 yrs and android is the blacksheep of the car audio world. Now, the pioneer app radio, through hdmi, works flawlessly with the revo. You can even get screen mirroring to out put the revo's display to your other monitors if you have them. :victory:
I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
fury683 said:
I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
Click to expand...
Click to collapse
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Thanks. I wasn't able to test it on 4.2.2 (it took right away OTA out of the box) with my Moto X, but it was working fine on my Droid Razr Maxx on 4.1.2 Jelly Bean before I got the Moto X.
I will have to try and see how it works with just the A2DP device without the handsfree. I rarely ever talk on the phone, and with the Touchless Controls I could call people and just pick up the phone. Or turn the phone portion back on for the A2DP device so the sound would come through my speakers but I'd still have to use the mic on my phone...
Still annoying. Thanks again for the reply.
gtg465x said:
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
Click to expand...
Click to collapse
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
I have a Dension BT gateway for my car that provides BT audio and hands free. My phone connects automatically as long is bluetooth is turned on. I also connect to a BT OBD2 adapter sometimes, and I tried it today, and I kept playing Pandora via BT and also connected to the OBD2 adapter and had data going from both of them.
fury683 said:
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
Click to expand...
Click to collapse
Yeah, but they aren't a separate connection I don't think. Pretty sure the one connection handles both.
Seems to be an issue with the A2DP device specifically. I unpaired my car and the dmzmusic device and repaired them both, same result. I added just the dmzmusic, and got the same thing.
I changed my Tasker profile to just flash a toast message to show it connecting and disconnecting instead of firing Pandora to see if that mattered and it didn't. I did not try disabling the Tasker actions entirely to see if that worked.
I have a pair of Bluetooth headphones at home that I may try as well to see if it will connect to those. They fire the same task as the dmzmusic does to launch Pandora when they connect, and kill it when they disconnect.
Hoping this gets fixed, because it's VERY annoying.
Is it possible to submit this to Google/Moto as a bug if it is a larger problem with all A2DP devices?
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
gtg465x said:
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
Click to expand...
Click to collapse
Thanks. I will try it with the Philips bluetooth headphones as well. The device in my car is pretty cheap. I don't know what version of Bluetooth it has, but it was only about $5. Anyone know of a similar device that can receive a Bluetooth audio signal and convert it to 3.5mm, and is powered by USB?
totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Well I sort of solved this. There's an app in the Play Store called Bluetooth Auto Connect. This can connect to bluetooth devices with a set of conditions and states, and works as a plug-in to Tasker. I told it to connect to dmzmusic upon connection to any other bluetooth device (in this case, my General Motors hands free). Worked perfectly. Thought you'd like to try it out for your dual device setup.
However, I also have a new issue. It seems the reason my phone call wasn't on bluetooth at first was due to some sort of connection issue with the General Motors unit. While driving home tonight, every few minutes my car radio said Connected. And every time I turned the car screen on to thumb up a song on Pandora, it flashed Connected to a trusted device. Which implied to me that it was disconnecting periodically. No idea why it would do this. Didn't see any setting for it in bluetooth, and battery saver isn't on.
Anyone seen something like this? Will try tomorrow without the trusted device settings to see if that matters....
I noticed a similar auto-connect issue with mine, when I was attempting to troubleshoot the stuttering A2DP issues I'm having. If I have the HFP and A2DP profiles both enabled, they both connect right up when the ignition is on. If I have the HFP profile disabled, and only A2DP enabled, it doesn't connect right away and I usually have to manually force it. Very strange. This whole BT situation on this phone has been a pretty big disappointment for me, since I had everything working great with my GNex (running 4.3) and now it's like I've lost the heart of my car audio system.
I bought the Kinovo BT dongle for my wife for Christmas, so it will be interesting to see how that works with her Moto X. I'm pretty excited about trying out the AptX encoding for lossless audio, but I doubt she will even notice the difference.
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
totempole said:
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Did you look at the auto connect app? It worked fine for me. My Bluetooth stopped working for a day or two because I froze a process without realizing what it was so BT wouldn't turn on at all. I think I have to remove and repair both of my devices to get the same setup I had on my Razr Maxx on 4.1.2,
The connecting/disconnection and/or 1-2 minute lag from my General Motors hands-free connection was annoying too. Have to see if that persists. I tried making the A2DP device the trusted one to see if that changes anything.
Really hoping this is something that Moto can/does fix, especially through a Play Store push like they've done with Active Display and the camera app.
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
640k said:
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
Click to expand...
Click to collapse
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
fury683 said:
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
Click to expand...
Click to collapse
not rooted/haven't wiped.
640k said:
not rooted/haven't wiped.
Click to expand...
Click to collapse
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
fury683 said:
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
Click to expand...
Click to collapse
could be completely device specific too. if your vehicle is BT v2.x or whatever. my tunelink specifically has problems with data/audio stream with the X that my X doesn't have problems with on other devices. could be software/hardware incompatibility issues.
FWIW, my vtech BT phone @ home would NEVER pair with other devices. i would always have to manually pair.
I just emailed Moto about this, because I'm having bugs too. I think that you're on to something, 640k. My Pioneer headunit (FH-P800BT) has BT 2.0, and while HSP connects fine, A2DP only works on the first pair, and after disconnecting once and reconnecting, it won't ever connect A2DP. I have to completely unpair the phone and re-pair it to get both A2DP and HSP working. My phone also gets stuck on "Connecting..." under BT whenever it's having issues connecting with A2DP. Here's the email I sent off to Moto"
I've noticed an issue with my new Moto X that I never had with my Samsung Galaxy Nexus. The phone itself performs way better than my older phone, but I've had a specific bluetooth problem. I have a Pioneer headunit that supports A2DP as well as HSP (music playback and headset functionality) and with my Galaxy Nexus, it worked great, I paired my phone up with the headunit, and both A2DP and HSP would pair at the same time, and work perfectly. With my Moto X, when I first pair the phone to the headunit, it pairs both profiles, but after I've disconnected (turned car off or turned bluetooth off) and come back, it only pairs HSP, and when I try to pair A2DP, my phone gets stuck on "Connecting..." under bluetooth to the headunit, and never will connect to A2DP unless I unpair and re-pair the entire phone. I've tried resetting my headunit and phone and still the same problem exists. Looks like other people are having issues with bluetooth too, as per this article on a popular Android forum > http://forum.xda-developers.com/showthread.php?t=2562186 < I'd like you all to check this out. Seems it's just on 4.4, and wasn't present on 4.2.2 (I never checked myself on 4.2.2, as I immediately upgraded to 4.4 when I got my phone. This doesn't seem to be a hardware problem, but more of a software problem. Please check into this, and don't just read this and act like it's only a problem a handful of people are having. I'd like to have this fixed, and while it's not a deal-breaker for me to use the phone, it does make me a bit frustrated. Thanks in advance!
Click to expand...
Click to collapse
Hey All,
I've done a quick and dirty search for this problem, but I haven't found anything that's exactly the same.
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
I have done the unpair/re-pair thing a couple of times, but nothing changes.
I had an HTC phone before this, and it'd reconnect automagically to my cars BT server, so I suspect it's nothing to do with the car's BT radio. I really miss that...
Thanks for any suggestions anyone might have in how to remedy this. Fwiw, I'm willing to go through a diagnostic procedure if someone would clue me in to just how to do that.
cheers,
john
I've had issues with the bluetooth and pairing. When I was on 4.2.2 (I think..) it wouldn't connect automatically at all, and I used an app to connect for me. I have a Chevrolet Cobalt and it wouldn't connect to my built in bluetooth for calls or a small bluetooth dongle that I use for playing music through the AUX input on the stock radio.
https://play.google.com/store/apps/details?id=org.myklos.btautoconnect&hl=en
Once I was on 4.4.2 it seemed to work much better. I have no real issues now on 4.4.4. The only time I notice it not really working right is when I try to connect to the bluetooth speaker in our bathroom at home. If I turn the speaker on, it almost always connects to my girlfriends phone nearly instantly, even though I open the bluetooth menu and tap the paired device to manually initiate right when I turn on the speaker. It usually takes me a few tries to get mine to connect before hers, or I ask her to shut her bluetooth off for a moment while I connect. She uses the speaker every day because she leaves for work after me, so it only happens to me 1-2 times per month on the off chance that I want to listen to music or a baseball game in the shower, so it never really bothered me much.
I think the bluetooth radio in this phone could be better.. I never had any similar issues with my Droid X or Moto Razr Maxx so I'm not sure what the deal is...
Edit: forgot to mention I also have an XT1060, but not dev edition. My bootloader is unlocked and I am rooted, but using the official 4.4.4 VZW rom with Xposed.
I have never had any issues pairing Bluetooth - on either my car or moto 360 watch (even simultaneously).
However, I have noticed that the Bluetooth connects much quicker on custom ROMs when compared to stock.
I think tour connection issue may be a setting or rogue app related.
Sent from my Moto X using XDA Free mobile app
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
jrredho said:
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
Click to expand...
Click to collapse
You may need to delete the profile for the Bluetooth pairing in your car. Could be a conflict there.
Otherwise, try looking at your Bluetooth settings on the phone.
Sent from my Moto X using XDA Free mobile app
jrredho said:
...
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
Click to expand...
Click to collapse
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
KidJoe said:
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
Click to expand...
Click to collapse
Guys, thanks for staying with me on this. One thing I've definitely learned is that the bluetooth thing is something I'm pretty ignorant on. I can see that I'm going to have to study it a bit before too long. Gad, that HTC spoiled me rotten---at least in that way.
I haven't tried the phone with any other BT devices. This is mostly because I don't own but two, the car and a travel speaker, and I haven't had the speaker out of its case since I scored the phone six or eight weeks ago. Also, I did some housecleaning, so I have only a small fraction, maybe 20%, of the same apps on the MotoX that I had on the HTC. I have no apps on the MotoX that I didn't have on the latter.
As for some of the car-related suggestions, it's a 2015 Subaru Forester Premium 2.5i, which is really only level up from the base model of that line. I can't find that there is a bluetooth profile setting in the car that I can change; I think that it's too basic. The relevant user manual simply states the following:
Media format
Bluetooth audio devices cannot be
connected if they are not compatible with
the following Bluetooth® profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
I don't even know what either of those mean!
Anyway, what I did do is go to the phone settings, and uncheck the Media box that shows up once the car's BT server is detected. Then I try to connect with the Phone box checked. It'll still fail to connect several times, but (a) it doesn't take as long to fail to connect, (b) it doesn't take as many tries (it seems) to make the connection, and (c) when it fails, it fails totally, so I don't have to disconnect from 'Media-only Connected (No Phone)' connection. That makes it easier I suppose. Then once the connection is established, it's a simple matter to go back to settings, and check the Media box. That add-on connection happens pretty quickly, but the process is still a little overwrought, imo.
Of course, KidJoe, up until you mentioned a Headset Profile, I didn't know one existed. But when I try to play music on my phone using PowerAmp, well, the app doesn't hook up to the BT anyway. That's a key difference between the HTC and the MotoX. In PowerAmp, I have "Play over Bluetooth on Detection" selected. The headset isn't being detected at all. So maybe that goes some distance to explaining what I'm encountering.
Again thanks to both of guys for hanging in there with me! I'll keep trudging "onward through the fog," as it were...
cheers,
john
A2DP and AVRC are used for Bluetooth Stereo audio streaming (like playing Pandora on your phone via your car stereo). Not phone calls.
For phone calls, usually a Headset or Handsfree profiles are used, and sometimes BT Phone Book Access (so you can see your phone's contact names/numbers on the car's screen).
I've run into compatibility issues between some phones and some Headset/Handfree devices (mostly cars, but a few bluetooth headsets too). Often times when this happens, you're stuck. Each side will blame the other (i.e. Moto will blame the Subaru car stereo, and Subaru will blame the phone).
I have had issues re-connecting to my car (a 2011 Saab 9-4x with Bose/Nav), IF I had my Moto S11 Flex HD headset connected to my Moto X before I got in the car (even if the S11 was powered off/disconnected from the X before I started the car). Usually toggling the X's bluetooth off/on, and sometimes worst case rebooting the phone, has always fixed it.. Another time I had troubles connecting to my Saab's car kit was when my wife was using her phone to stream audio. The next time I got in the car, I had to manually connect my phone. The car always tries to connect to the the last phone used, so it was looking for my wifes and it took a while before it timed out. When it did time out, it didn't look for mine.
Since you have a 2015 Subaru, I would consider visiting your car dealer, ask them to help with pairing the phone properly, and making sure its working right. See what they have to say.
My bluetooth in my car stopped pairing the other day, and it turns out it was an app that updated and requested permissions related to bluetooth. I didn't notice them because it's an app I trust so I accepted the new permissions without really looking at it.
I used App Settings (Xposed module) to disable the permissions and my bluetooth works fine again.
I could still pair with things if I went to the bluetooth paired device list and manually tapped on the device I wanted to connect with, but it would not pair automatically (like when I got in my car). Once I disabled that permission, it started working again without issue.
May be worth a look through your installed apps to see if anything has access to bluetooth and may be interfering.
Hey All,
Thanks again for the continued help!
It's true, I didn't do any research on app interference before I posted this thread topic, but since a couple of you have brought it up, I decided to do a little research. I installed a permissions app, and took a look at the permissions that allows an app to automatically seek out, and pair with, Bluetooth servers. I have to admit, I got some surprises there. (Who would've thought that Beautiful Widgets needed that permission; it is now gone.)
Anyway, most of the remaining apps are either system/Moto-related, or ones I would really like to keep. I'll report back on what I learn. If there are other permissions that I need to reference besides the two pairing-connecting to Bluetooth ones please let me know...
cheers,
john
Hello,
I own a Hyundai I35 2014,
I have the phone connected via Bluetooth, and i can make and receive calls just fine, all is loud and clear.
But it will not play Music (not from YouTube, not from google Music) when i hit AD2P
I checked some forums and other sites, i tried unpairing, i tried force stop and remove data and clear cache, i tried to do almost anything - nothing worked.
i also do not have the "Media Audio" option under options in Bluetooth device properties (when you click the round icon next to the car device name) - but also ,
My brother has LG G3 (android 5.0) and he is ABLE to play music just fine - He also do not have the "Media Audio" option in bluetooth device properties.
Both phones properties look the same, but only the LG G3 is playing music once AD2P is chosen in the Car.
any help would be much appreciated.
thanks !
Sounds like a vehicle issue - most phones will not stream audio to a device which doesn't present it with the A2DP profile. Maybe you need to master reset your car's stereo or check with the dealership for a stereo FW update.
Ford just recently released an updated firmware for Sync and now I get mp3 metadata on the display and it auto-reconnects to BT after shutting the truck off.
I`v actually done that, but how can i blame the car when my brother's LG G3 works great with it, and my Wife's iPhone 6Plus works great as well ?
Just from a quick Google search it seems the bluetooth in that car (I'm gonna assume you have a Hyundai ix35, since no "i35" exists) is flaky and problematic.
I would call the dealer and ask if there's a system update to fix BT issues.
I've had an ongoing issue with my Pioneer head unit where it will stop working with Media Playback and continue to connect for call audio. Each time it does this I have to clear the Bluetooth memory on my Pioneer unit. Perhaps your Hyundai has a similar option? They you can repair the device and it should work.
Edit: I should add that this was never an issue with my previous 2 phones (a Samsung Captivate and Nexus 4).