[Q] Dual boot - I need stock kernel.md5 - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Hello,
I am trying to dual boot my device using the instructions of BOOTMGR, which you can find in this thread.
http://forum.xda-developers.com/showthread.php?t=2521917
But when I am in CM I need the stock kernel, which is an '.md5' file. When I extract the stock firmware from sammobile, I get two bin.md5 files.
I also tried this one http://forum.xda-developers.com/showthread.php?t=1873119 but it is also an .bin.md5 file, and both bin.md5 files don't work. Does anyone know where I can find the stock.md5 file, or how I can get it/convert it?
Thanks.

Take cocore kernel and rename it to stock.md5
Sent from my GT-I9070 using XDA Premium 4 mobile app

wmfaiz said:
Take cocore kernel and rename it to stock.md5
Sent from my GT-I9070 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I did this: I extracted the 'cocore.tar.md5' file. Then I got the 'cocore.bin.md5' file and I renamed this to 'stock.md5'. I placed this file in the stock folder and now it is stuck again on bootscreen.
So I got this on my device: 'Dual Boot'>'Stock'>stock.md5.

MeneerStef said:
I did this: I extracted the 'cocore.tar.md5' file. Then I got the 'cocore.bin.md5' file and I renamed this to 'stock.md5'. I placed this file in the stock folder just and now it is stuck again on bootscreen.
So I got this on my device: 'Dual Boot'>'Stock'>stock.md5.
Click to expand...
Click to collapse
strange, because i also dualboot but i did not get this error

wmfaiz said:
strange, because i also dualboot but i did not get this error
Click to expand...
Click to collapse
I tried it with Paranoid Android and then with CM10.2. If i don't change the kernel it just boots the custom rom. If I change the kernel I need to flash the stock firmware so it will work again.

First before you do anything with dual boot, flash odin. After you got the original firmware then flash cocore kernel. After that take cocore kernel md5 file renamed in into stock.md5 and put it into respective folder. Hope this works for you because it works for me

Help : Dual Boot ... Battery Draining too fast... even when in not use...
hi there..
i am new on xda...
i have installed Dual Boot for my i9070... As primary rom i used Harshjelly 5.0 which is working fine... but as Secondary rom cm11-20140214-unofficial-jenice.. Rom was installed successfully.... as the instruction told in the post http://forum.xda-developers.com/showthread.php?t=2521917 rom is working fine... but my battery is draining so fast... as 1% per minute... either i use it or not....
kindly help me to solve out this problem....
Thanx....

http://forum.xda-developers.com/showthread.php?t=2569798
Powered by CM10.1

R_a_z_v_a_n said:
http://forum.xda-developers.com/showthread.php?t=2569798
Powered by CM10.1
Click to expand...
Click to collapse
thanks... but what about the battery... problem.....

harpal singh said:
thanks... but what about the battery... problem.....
Click to expand...
Click to collapse
Sorry, I do not use DUALBOOT so I can not tell anything about that. Maybe you should ask this in the dedicated topic.
http://forum.xda-developers.com/showthread.php?t=2521917

R_a_z_v_a_n said:
Sorry, I do not use DUALBOOT so I can not tell anything about that. Maybe you should ask this in the dedicated topic.
http://forum.xda-developers.com/showthread.php?t=2521917
Click to expand...
Click to collapse
thanx...

Related

[MOD] Battery Percentage Mod - alternative version

Hello,
I have made some modifications to MaliciousKen's mod of the battery percentage for stock rom:
Changes:
- the main change is to show the percentage even during charging; I based on MaliciousKen's graphic files and just made some changes in the xml
- based on v10d stock rom's framework-res.apk
- retain music notification in the status bar (i.e. same as stock version, you can disable it in Music's setting; there seems no problem in v10d version on this)
This is my first time modifying an apk! Please have a try and let me know if there is any problem
Any screenshots pls??
Will it work on mcr10?
No. This version is for stock ROM.
How do i install this ?
Read this thread:
http://forum.xda-developers.com/showthread.php?t=1007863
You'll install it as is (archive) with option "install zip from sd card".
It Just rebooted when i got to enter simcode..
MidNightRX said:
It Just rebooted when i got to enter simcode..
Click to expand...
Click to collapse
Same happened to me. Using V10b baseband.
Sent from my LG-P990 using Tapatalk
DO NOT INSTALL THIS !!
If you will make this mistake, do a backup first. In case you don't ,you must flash a new rom.
Just a warning, maybe you have anything else to do these days.
Thank you very much by the way..
Vidroid said:
Same happened to me. Using V10b baseband.
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
Sorry if it has caused trouble. Now I have uploaded another one based on MaliciousKen's version directly. So hopefully this should work for v10a/b/c.
Do make a backup (at least copy out your original framework-res.apk) before you try.
cristian_seven said:
DO NOT INSTALL THIS !!
If you will make this mistake, do a backup first. In case you don't ,you must flash a new rom.
Just a warning, maybe you have anything else to do these days.
Thank you very much by the way..
Click to expand...
Click to collapse
You don't need to flash a new rom, just install MaliciousKen's version. That worked for me.
Sent from my LG-P990 using Tapatalk
dohanin said:
Sorry if it has caused trouble. Now I have uploaded another one based on MaliciousKen's version directly. So hopefully this should work for v10a/b/c.
Do make a backup (at least copy out your original framework-res.apk) before you try.
Click to expand...
Click to collapse
NO, same thing. Maybe you should try first!
cristian_seven said:
NO, same thing. Maybe you should try first!
Click to expand...
Click to collapse
hmm.... I did try before posting these files. I only have v10a and v10d stock rom and the above two mods work fine on my phone, so I'm running out of ideas now.
However, if either of the above works for anyone, please kindly let me know.
As said, it's the first time I modified an apk file, so when I found it successful (on my phone), I'm so excited to share here. Too bad if it only works on my phone
I have re-built the apks with another method and tested ok. Please have a try if you have time
dohanin said:
I have re-built the apks with another method and tested ok. Please have a try if you have time
Click to expand...
Click to collapse
which xml file should I edit in order to build a working apk ?
I tried to modify the stat_sys_battery.xml and stat_sys_battery_charge.xml
and I have also put the image file in correct place..
using APKmanager to compile and sign ...
I just got boot loop afterall -__-
Anything I have missed ?
the 1st xml is for the normal display of the icon while the other one is during charging (animation)
i used apktool 1.3.1
(note the latest apktool is 1.3.2 but this one appears buggy, i also had the boot loop with it)
Sent from my LG-P990 using XDA App
Hi
Can be used with the 29 Sep Gr3 WIP (V20i) MoDaCo Custom ROM?

Official ICS firmware file for Arc S LT18i :)

Here is the official ICS firmware file for Arc S LT18i
Download here:
http://eddy.uni-duisburg.de/bin4ry/L....0.562_NCB.ftf
c1ae2eef1677a7aa72db7430e516ea4c LT18_4.1.A.0.562_NCB.ftf
credit goes to Bin4ry for providing the file
HAPPY PORTING
Is this leaked version or the final one just released?
Thank for share bro!
how to instal this zip
it is not a zip..use flashtool to flash it...
It is a .zip file.
We need to change the file extension to .ftf then can flash with flashtool
Is it Prerooted?
SS4Serebii said:
Is it Prerooted?
Click to expand...
Click to collapse
No, it's official.
Amor Cbr said:
how to instal this zip
Click to expand...
Click to collapse
LT18i_4.1.A.0.562_Generic.ftf (367.8 Mb)
Its isn't a zip file if you got a zip then something has changed the name, i got several of this problems nowdays :/
LastStandingDroid said:
LT18i_4.1.A.0.562_Generic.ftf (367.8 Mb)
Its isn't a zip file if you got a zip then something has changed the name, i got several of this problems nowdays :/
Click to expand...
Click to collapse
Well .tft are in fact zip files with different extension
It's possible that browser "detected" it as zip and changed extension by itself
Something for Neo ?
what if i flashed my arc s with this version? cn i downgrde to GB like v62, 58,.42? I want to clear this out coz i might not like ICS.. i tried ICS before (beta version) but it seems that GB is more responsive thats why i keep going back to GB...thanks
borjok536 said:
what if i flashed my arc s with this version? cn i downgrde to GB like v62, 58,.42?
Click to expand...
Click to collapse
yes you can
gen_scheisskopf said:
Well .tft are in fact zip files with different extension
It's possible that browser "detected" it as zip and changed extension by itself
Click to expand...
Click to collapse
Wrong, both are compressed but different methods used.
Sent from my LT18i using Tapatalk 2 Beta-6
DOne! i flash nd gt 2 errors, but t works!! ty
ARC.
Nothing for normal ARC?
Normal arc follow the post here : http://forum.xda-developers.com/showpost.php?p=24824342&postcount=223
guys are there any tweaks to increase performance and manage ram?I managed to root and install CWM but I am still on locked BL,so I can't flash a costume kernel(like DoomKernel) and that's why I need any way to boost my device's speed and RAM stabilty...thanks for any help provided..
Plz Enlighten me.
Which one the best GBread or ICSandwich ?
deepakumar said:
Which one the best GBread or ICSandwich ?
Click to expand...
Click to collapse
by popular terms, GB is mature whilst ICS is developing - but it is worth to try, this is a development thread anyway
:-?
So, for the moment u say dat GBread is ready to eat

[N7000][Odin]AllianceROM_N7000-v3.4 Resurrection Edition[smooth n safe][REORGANISING]

AllianceROM_N7000 GB v3.4
GingerBread Evolution
Resurrection Edition​
What is Resurrection Check the changelog & info HERE
Check the cool Gingerbread based theme HERE
How to install go HERE
Download AllianceROM_Note v 3.4 GB Evo RE HERE
checksum 3.4 RE :
SHA1: bd41106e69cebff672cc468a07bcc1d8b86dec4f
MD5: da529563e35a3cf0bb207deff7a243f9​
How , what, where , when , why ... FAQ : HERE
Special Thanks to:
Ficeto for all his expertise !
My Closed Beta Testers​Like the ROM help me keep it up
Like the new stability Ficeto provides with his NoteCore 0.1
Hi, Robbie
Do you have any plan to start ICS ROM for note? I like your ROM but ICS is too hot to refuse.
Sent from my GT-N7000
dahuzi said:
Hi, Robbie
Do you have any plan to start ICS ROM for note? I like your ROM but ICS is too hot to refuse.
Sent from my GT-N7000
Click to expand...
Click to collapse
Not on open source ROMs or Roms meant for toher devices.
I will be patient and will wait for a proper N7000 release without risks
Hi !
Counter increase ,and Triangle_away method not working .
doesnt the traingle away just for work for ICS roms and not GB?
since this is a GB rom it wont work...
staffik said:
Hi !
Counter increase ,and Triangle_away method not working .
Click to expand...
Click to collapse
I just updated the method maybe you where to fast but yes the counter will increase as always with odin and custom builds
Robbie Hood said:
I just updated the method maybe you where to fast but yes the counter will increase as always with odin and custom builds
Click to expand...
Click to collapse
Ok, then I need use JIG to reset the counter,is thats operation safe?
To avoid the traingle and custom.counter
Why not flash it with mobile odin?
The new method for triangle working but I need reset counter
All working like a charm (of course I didn't expected less ) TNX for keeping smile on flash maniacs faces.
Hy,
Thanks for the rom !!
Can't flash with mobile odin pro ?
Ok all users please remove the DarkyOTA test app that you have currently in your system with some file browser or adb or whatever and download the DarkyOTA app from the market.
I have just made the first theme flashable via OTA.
So first up in the Visuals section of the OTA tab in the DarkyOTA app is the stock Samsung theme.
Please search under OTA/Updates for the text cleaner zip before you use the stock theme.
More Themes to come soon !!
buzzdr0id said:
Hy,
Thanks for the rom !!
Can't flash with mobile odin pro ?
Click to expand...
Click to collapse
you can use Mobile Odin Pro, i did and all is well/perfect ,but i've only been using it for less than an hour now....later will tell you if Sh*t hits the fan or not otherwise its AYOBA(Great) as we say in South Africa
skyelm said:
you can use Mobile Odin Pro, i did and all is well/perfect ,but i've only been using it for less than an hour now....later will tell you if Sh*t hits the fan or not otherwise its AYOBA(Great) as we say in South Africa
Click to expand...
Click to collapse
Yep worked like a charm
Sent from my GT-N7000 using Tapatalk 2
flashing ASAP
Swype
Hello DarkyFellows
Would anyone be so kind to tell me how to restore Swype?
Although I tried installing the beta version available on the Swype website it doesn't look as before... It has some horrible "theme" and keys with such s ridiculously small size they become unusable.
I actually saw some reference to it in DarkyOTA's DarkyROM section [new, updated one as suggested] but I just couldn't figure out what it was for or how to use it.
Please help...
Please advise...
Cheers.
Hmm not sure if rom related but when I screen shot and send via sms the oic is all blurred and distorted? Anyone else try this?
Sent from my GT-N7000 using Tapatalk 2
@Robbie
Morning mate...
Can you upload somewhere the apks from /system/app and system/framework folders so i can Theme them???
Cause i don't know how to extract them from .img file inside your tar...
Thanks...
kalagas said:
@Robbie
Morning mate...
Can you upload somewhere the apks from /system/app and system/framework folders so i can Theme them???
Cause i don't know how to extract them from .img file inside your tar...
Thanks...
Click to expand...
Click to collapse
use sg2toext4.jar to convert the .img file to ext4(generally factory.img contains the framework and app) and then use the disk linux reader tool and mount the img file which you converted using the sg2toext4. Once it is mounted, then you can double click on mounted icon and then select save to folder.
another solution is to use dsixda kitchen to extract the files!
sorry m8, i did not downloaded this ROM, hence i cant upload, but that is the procedure to be adopted.
grgsiocl said:
use sg2toext4.jar to convert the .img file to ext4(generally factory.img contains the framework and app) and then use the disk linux reader tool and mount the img file which you converted using the sg2toext4. Once it is mounted, then you can double click on mounted icon and then select save to folder.
another solution is to use dsixda kitchen to extract the files!
sorry m8, i did not downloaded this ROM, hence i cant upload, but that is the procedure to be adopted.
Click to expand...
Click to collapse
Thanks a lot mate...
Unfortunatelly as i saw a little from these you told me, to run it correctly it needs some reading...
And i don't have the time right now ...
So i will wait if someone could upload the 2 folders with apks to theme it...

[Q] Problem problem problem!

I wanted to flash over clock kernel on my cm 11 i opned ukf but it showed device not supported is there some other way to flash the kernel? any help would be appreciated thanx in advance.
ash5618 said:
I wanted to flash over clock kernel on my cm 11 i opned ukf but it showed device not supported is there some other way to flash the kernel? any help would be supported thanx in advance.
Click to expand...
Click to collapse
I am on AOSP 4.4, and I can use UKF. On what CM11 are you?
shut_down said:
I am on AOSP 4.4, and I can use UKF. On what CM11 are you?
Click to expand...
Click to collapse
i am on cm 11 by maclaw. i even tried using ukf on liquidsmooth it still showed not supported
ash5618 said:
i am on cm 11 by maclaw. i even tried using ukf on liquidsmooth it still showed not supported
Click to expand...
Click to collapse
You can't even browse for kernel or?
shut_down said:
You can't even browse for kernel or?
Click to expand...
Click to collapse
no i cant do nything.whenever i open the app it shows not supprtd and i cant do nything
ash5618 said:
no i cant do nything.whenever i open the app it shows not supprtd and i cant do nything
Click to expand...
Click to collapse
Why don't you ask Frapeti on his thread? He made that app. To see what is the problem.
shut_down said:
Why don't you ask Frapeti on his thread? He made that app. To see what is the problem.
Click to expand...
Click to collapse
can i flash the kernel using odin?
ash5618 said:
can i flash the kernel using odin?
Click to expand...
Click to collapse
Yes, if you make it Odin flashable. But I am not sure if it is possible on CM, I never did it.
You can use dd command in terminal emulator, but be very carefull. It is explained on CoCore thread I think.
P.S. There was some other app for PC to flash kernel. Look on our section, if I find it I will post you here.
Here it is: http://forum.xda-developers.com/showthread.php?t=2119676
It does the same like you would in terminal emulator with dd command, and Universal Kernel flasher is doing the same. Just with GUI.
shut_down said:
Yes, if you make it Odin flashable. But I am not sure if it is possible on CM, I never did it.
You can use dd command in terminal emulator, but be very carefull. It is explained on CoCore thread I think.
P.S. There was some other app for PC to flash kernel. Look on our section, if I find it I will post you here.
Here it is: http://forum.xda-developers.com/showthread.php?t=2119676
It does the same like you would in terminal emulator with dd command, and Universal Kernel flasher is doing the same. Just with GUI.
Click to expand...
Click to collapse
i am currently away from my pc so is there any other way arnd for example can i replace the default boot.img which comes with the rom with the over clock version ( boot.img only) will it work? and i tried it through solid explorer but it cant replace the boot.img. any other file browser to replace it? thanx in advance
ash5618 said:
i am currently away from my pc so is there any other way arnd for example can i replace the default boot.img which comes with the rom with the over clock version ( boot.img only) will it work? and i tried it through solid explorer but it cant replace the boot.img. any other file browser to replace it? thanx in advance
Click to expand...
Click to collapse
Try with this app https://play.google.com/store/apps/details?id=com.frapeti.ukflash2&hl
ash5618 said:
i am currently away from my pc so is there any other way arnd for example can i replace the default boot.img which comes with the rom with the over clock version ( boot.img only) will it work? and i tried it through solid explorer but it cant replace the boot.img. any other file browser to replace it? thanx in advance
Click to expand...
Click to collapse
Yes with Root Explorer (paid version) just search for the latest APK on google.
Sent from my GT-I9070 using xda app-developers app

[help] files of sensors to fix xiaomi mi a2

Hi guys since i lost my sensors system(gyroscope,accelerometer, rotation, etc) i would like to try something i need some archieves of the system folder.
who could send me the system folder of the mi a2 please?
or the folders
system/bin
system/etc
system/lib
please
As far as I know you need to flash persists.img. Download your room and extract it from the Rom.
r_kalar_2 said:
As far as I know you need to flash persists.img. Download your room and extract it from the Rom.
Click to expand...
Click to collapse
How do i Flash that ?
With twrp...
Sent from my MI 6X using Tapatalk
Actually i'm on pixel experience , do i have to come back to stock ? And after of that Flash that img ?
Because when i Flashed the stock rom the sensor still not detected by my phone ...
Please ask on the PE thread.
r_kalar_2 said:
Please ask on the PE thread.
Click to expand...
Click to collapse
i installed stock again , so do i just install it using twrp ?
r_kalar_2 said:
As far as I know you need to flash persists.img. Download your room and extract it from the Rom.
Click to expand...
Click to collapse
when i use the installer on twrp it says "cannot flash images to file systems"
benjamin23 said:
i installed stock again , so do i just install it using twrp ?
Click to expand...
Click to collapse
Answer is here: https://forum.xda-developers.com/mi-a2/how-to/how-to-fix-sensors-camera-stock-pie-10-t3914885

Categories

Resources