Related
So I just got back my nexus one from htc, got my mother board changed and preloaded with 2.2. I rooted it with universal root without unlocking my bootloader.
Problem: when I reboot after successfully loading CM6 and have it running, it reboots to the "X" and hangs.
Am I doing something wrong?
For how long is it hanging? I recall having to wait what seemed like forever the first time I booted with CM6... but eventually it 'took'.
rnick1976 said:
For how long is it hanging? I recall having to wait what seemed like forever the first time I booted with CM6... but eventually it 'took'.
Click to expand...
Click to collapse
You have a locked bootloader as well right? I waited a good 30 mins. Maybe i should leave i and give it more time to boot?
All works normally on inital boot of CM6 after install with locked bootloader, just that when i try to reboot the first time manually... it stays at the "X" for an awefully long time.
Did you wipe?
Try wiping data,cache,dalvik-cache.
ya, this is what i did.
1) Universal root with locked biootloader on stock 2.2
2) installed rom manger
3) flashed recovery + downloaded and flashed CM6 + google apps
Boots up fine, runs CM6 flawless. Upon manual reboot, it hangs on the X
Then i tried:
1) reboot into recovery
2) full wipe + davlick cache
3) reinstall CM6 + google apps
Still hangs. I haven't had time to play with it, but ill try to leave it along upon reboot a lil longer to see if it pulls thu~
Please let me know whether after installing the 6.0 cyn. rom and after the initial install you can then reboot and it pulls up and runs as usual. I am getting ready to flash the cyn 6.0 rom I am on stock 2.2 and have never flashed a rom before I have backed up the current rom through Rom Manager and flashed Clockworkmod recovery and I have the unloocked bootloader root as well. I have a question if and when I flash the new rom through Rom Manager does it not wipe and clear data etc. automatically? If not how would i go about doing that. Any and all help is greatly Appreciated!!!!!!!!!!!!!!
tenbeau said:
Please let me know whether after installing the 6.0 cyn. rom and after the initial install you can then reboot and it pulls up and runs as usual. I am getting ready to flash the cyn 6.0 rom I am on stock 2.2 and have never flashed a rom before I have backed up the current rom through Rom Manager and flashed Clockworkmod recovery and I have the unloocked bootloader root as well. I have a question if and when I flash the new rom through Rom Manager does it not wipe and clear data etc. automatically? If not how would i go about doing that. Any and all help is greatly Appreciated!!!!!!!!!!!!!!
Click to expand...
Click to collapse
MY bootloader is LOCKED, i rooted differently. Since you have a UNLOCKED bootloader, you will have no problems booting.
I still never got a chance to play with the N1 yet, ill keep u guys updated
tenbeau said:
I have a question if and when I flash the new rom through Rom Manager does it not wipe and clear data etc. automatically? If not how would i go about doing that. Any and all help is greatly Appreciated!!!!!!!!!!!!!!
Click to expand...
Click to collapse
When you go to flash a new ROM in Manager, it will offer you the option to wipe and/or backup before it applies the ROM.
Thank you so much for the kind replies!! I meant to say that I had a locked bootloader root using the one click root and unroot. I guess this means I would face the same situation as described earlier in this thread. I am very grateful to all the posters for sharing. THANK YOU!!!
Do you mean it hangs on the nexus one X boot animation? Because CM6 has it's own boot animation you shouldn't see that at all.
I would test it with a different Rom to see if you get the same result. If it's only CM6 doing that, maybe try the nightly version.
Since about a week I'm having the following problems:
It is extremely difficult to get my phone running ICS. I tried like 10 different ROMs, the only one currently working is Dark Knight. In between I managed to run CM9 Nighlty (2 days) and Infinitum 2.2 (3 days)
Why is it so difficult? Well - I believe, I'm doing all the correct steps: Flashing JVZ with Odin, rebooting, flashing CF Root, rebooting. Enter CWM, wipe data, cache, dalvik, format system -> Install any ICS rom
Currently, CM9 doens't work at all, I get boot loops after the initial reboot and can't enter recovery
Well, when I finally manage to install any rom (method: install Dark Knight - 5.5 atm - install any rom afterwards - my phone boots up correctly and is perfectly usable
But: Whenever I reboot, I keep getting boot loops with no chance of entering recovery. None of the usual methods work.
Stupid thing: I don't need to reboot. But every other day the phone tends to reboot itself (at least that is what I experienced and sorta guess)
Result: I take it out of my pocket or look at it on my desk and see boot loops after 2 or 3 days
What can I do, why is that? I don't want to run Gingerbread
I am not a noob - I have been running any rom before for one and a half years without problems and flashed mostly without any problems
Believe me - I have tried everything for several days. Flashing the recovery fix with Odin doens't help either. Afterwards I am a able to boot intro recovery but can't install any rom due to build.prop errors. However, I can flash a kernel... Result: boot loop. Solution: Start over with Gingerbread and Odin
The more I think about it, the more I belive there could be an underlying hardware problem. Maybe something with the internal NAND?
I am greatful for any help or new ideas which I haven't tried so far... Thanks a lot in advance!
I know it's a long shot, but maybe you have issues with datadata folder? Use root explorer and see how much free space you have there...
Maybe try this:
After Odin, When in CWM, flash first a new kernel (try devil.072). Make sure to mount folders with CWM before. After flushing, go to advanced and reboot recovery. Now you have a new version of CWM (which supports screen tuch...). Now, from mounts and storage, format everything. Now flush the rom you want - in this case, I recommend Slim 3.4. Don't install anything yet - just let it run after flushing. Just login to your google account.
See if it works.. hope it helps
Thanks a lot! Unfortunately, it didn't work.
I tried your method which didn't even end up in a bootloop but in recovery after every flash/try to reboot.
/edit: Speaking of reboots - I tried to install CM9 afterwards/instead -> boot loop
Hmmm u have a interesting problem. Do u wipe everything and have u tried starting from a different stock gb
If you like my posts hit thanks
Rom: Dark knight 4
Kernel: Devil Kernel
Keep it ANDROID!!!!!!!!
Yes, I wipe everything and tried JVZ and JVU as a starting point. Are there any other recommendations?
which firmware are you odining? maybe bad download?
Bara2 said:
Thanks a lot! Unfortunately, it didn't work.
I tried your method which didn't even end up in a bootloop but in recovery after every flash/try to reboot.
/edit: Speaking of reboots - I tried to install CM9 afterwards/instead -> boot loop
Click to expand...
Click to collapse
Just try it again but do NOT select reboot recovery. It is a common bug that you won't be able to leave recovery again. Just reboot the phone and be sure to quickly press 3 button combo again to get into recovery again. You should then be able to format / reflash and so on. Just make sure you never select reboot recovery when you just came the long way from odin. In doubt just do as I stated: normal reboot and press 3 button combo quickly.
Good luck!
shaharofir said:
which firmware are you odining? maybe bad download?
Click to expand...
Click to collapse
I agree many try a firmware from stock firmware from xda
If you like my posts hit thanks
Rom: Dark knight 4
Kernel: Devil Kernel
Keep it ANDROID!!!!!!!!
swent said:
Just try it again but do NOT select reboot recovery. It is a common bug that you won't be able to leave recovery again. Just reboot the phone and be sure to quickly press 3 button combo again to get into recovery again. You should then be able to format / reflash and so on. Just make sure you never select reboot recovery when you just came the long way from odin. In doubt just do as I stated: normal reboot and press 3 button combo quickly.
Good luck!
Click to expand...
Click to collapse
Ok, That shall be my next try Btw: Another strange effect: I flashed Dark Knight 5.5, did nothing but click through the setup assistant rebooted - and voilà - boot loop.
Will report back in a few minutes Thanks a lot, guys!
/Edit: Well - a litte success... I was able to boot into the system. First thing I did was change lcd density and rebooted - everything was fine. As I didn't have wifi or data connection I wanted to flash another kernel (devil) and hit reboot recovery from the power menu.
--> Boot loop again.
To the other guys: I tried JVU and JVZ with different downloads and two different laptops. Which starting base should I try next?
/Edit2: I'm going to stay on Gingerbread for the day. I need my phone and intend to enjoy the fantastic weather for the rest of the day... Will be back this evening. I am glad for further feedback and ideas
Bara2 said:
Ok, That shall be my next try Btw: Another strange effect: I flashed Dark Knight 5.5, did nothing but click through the setup assistant rebooted - and voilà - boot loop.
Will report back in a few minutes Thanks a lot, guys!
/Edit: Well - a litte success... I was able to boot into the system. First thing I did was change lcd density and rebooted - everything was fine. As I didn't have wifi or data connection I wanted to flash another kernel (devil) and hit reboot recovery from the power menu.
--> Boot loop again.
To the other guys: I tried JVU and JVZ with different downloads and two different laptops. Which starting base should I try next?
Click to expand...
Click to collapse
Umm well I use jvu and have no problems. This might sound stupid but when I had a similar prob (I flashed a kernel on dark knight 4 and got into a bootloop and couldn't enter recovery) I did a factory restset after backing up my SD card data and flashing jvu, then I reflashed jvu. Rooted, wiped rebooted recovery, wiped again, rebooted recovery again, then I flashed dk 3 then dk 4 without a wipe, the restored my apps and copyed my SD data back - I hadn't been able to flash a rom since the bootloop I got it working with dk 3 but then I got no boot animation and I just stopped there, the above process worked for me I know u on dk 5.5 but try dk 3 you should find the link in the dk thread around April 12-16 this year.
If you like my posts hit thanks
Rom: Dark knight 4
Kernel: Devil Kernel
Keep it ANDROID!!!!!!!!
You may flash the new kernel right away after flashing the desired rom. Maybe that would stabilize everything... can't make any more sense of it right now, sorry :/ Maybe you could try to use the ultimate kernel cleaning script AFTER flashing the rom and BEFORE flashing the new kernel (with no reboot in between).
Script is somewhere out there, I'm gonna search it right now...
/EDIT: Wasn't really hard to find after all, there you go: Ultimate Kernel Cleaning Script
try this firmware for odin:
https://www.sugarsync.com/pf/D6246658_3937073_82911
Hi guys, I'm having trouble with new ROM installation. I've been using Gingercruzt ROM since last spring with stock kernel. Bootloader is not unlocked, I've only rooted the phone. It's been working fine until I decided that I want to try something new today. I downloaded the GingerDX rom and installed it with CWM. Everything went fine and I rebooted the system. The phone didn't start, it got stuck on the SE logo. I couldn't enter CWM or xRecovery anymore. It bricked. Using SEUS I brought back the stock rom. I rooted the phone again, installed newer version of CWM from the toolkit, etc. I downloaded the zip again, installed it again - it bricked the phone the same way. Then I tried with two different roms - FroyoPro and Free Dom experience with full wipes on everything before installing - same thing, doesn't start. I was able to enter xRecovery with FroyoPro but no CWM and it get stuck at rom's loading screen.
Help please, what happened to my phone Why doesn't it load a ROM like it did yesterday?
Thanks in advance!
vgaBG said:
Hi guys, I'm having trouble with new ROM installation. I've been using Gingercruzt ROM since last spring with stock kernel. Bootloader is not unlocked, I've only rooted the phone. It's been working fine until I decided that I want to try something new today. I downloaded the GingerDX rom and installed it with CWM. Everything went fine and I rebooted the system. The phone didn't start, it got stuck on the SE logo. I couldn't enter CWM or xRecovery anymore. It bricked. Using SEUS I brought back the stock rom. I rooted the phone again, installed newer version of CWM from the toolkit, etc. I downloaded the zip again, installed it again - it bricked the phone the same way. Then I tried with two different roms - FroyoPro and Free Dom experience with full wipes on everything before installing - same thing, doesn't start. I was able to enter xRecovery with FroyoPro but no CWM and it get stuck at rom's loading screen.
Help please, what happened to my phone Why doesn't it load a ROM like it did yesterday?
Thanks in advance!
Click to expand...
Click to collapse
Did u cleared 'dalvik-cache' in case of froyopro & when u are stuck at 'Sony Ericsson' logo did u checked that u have downloaded thi Rom zip for 'stock kernel' I think this the problem download zip for stock kernel
Hit thanks if this helped u
sent from my W8 using client-server technology
Yes, I cleared all the possible caches, system and other folders. I even formated my sd card, just in case...
I downloaded all the right roms for stock kernel, all three of them. As I said, I've done this before and it worked from first try.
Thanks for trying to help me!
vgaBG said:
Yes, I cleared all the possible caches, system and other folders. I even formated my sd card, just in case...
I downloaded all the right roms for stock kernel, all three of them. As I said, I've done this before and it worked from first try.
Thanks for trying to help me!
Click to expand...
Click to collapse
You should not format /system, cause you are actually removing recovery+rom
& are you sure that froyopro supports stock kernel?
Sent from my ULTIMATE using Tapatalk 2
jay-z-s said:
You should not format /system, cause you are actually removing recovery+rom
& are you sure that froyopro supports stock kernel?
Sent from my ULTIMATE using Tapatalk 2
Click to expand...
Click to collapse
yup froyopro support stock
vgaBG said:
Yes, I cleared all the possible caches, system and other folders. I even formated my sd card, just in case...
I downloaded all the right roms for stock kernel, all three of them. As I said, I've done this before and it worked from first try.
Thanks for trying to help me!
Click to expand...
Click to collapse
Then don't format /system
sent from my W8 using client-server technology
try to redownload the rom. flash it again after a full wipe, then reboot.
signature under repair
I cleared the system folder before flashing a new ROM just to make sure I have deleted the stock ROM.
I tried with three different new ROMs, none of them started. Strange thing... everything goes well with the install and then it just won't turn on.
Do you think it's going to be different If I try to unlock the bootloader and flash nAa's kernel? I don't really want to do that but the phone is manufactured before the 29th week so it's capable.
are you sure it doesnt turn on?,first boot may take some minutes...
Yeah, I know, I've left it for more than 15 minutes with any of the tried roms.
I think I should write down the steps I'm taking after the flash back to stock rom with SEUS.
1. Activating debugging mode and unknown applications.
2. I already have the Android SDK, adb server and drivers from before so I open SuperOneClick and root the phone. Busybox is installed and Superuser is on. Everything goes smoothly during the process.
3. Using x8toolkit I install xRecovery and CWM via Dualrecovery.
4. Reset and entering CWM. Full wipe, install from zip, installation goes without problems and says - Go on buddy, restart and start using
5. Reset, Sony Ericsson logo and that's it. Nothing more happens. With GingerDX and Free Dom experience I can't enter recovery any more. FroyoPro's starting screen shows up after the SE logo but that's all it does - it never goes any further. I can enter xRecovery but no CWM.
I tried installing roms with both xRecovery and CWM - all the same. Could it be some physical damage even though the stock rom runs perfectly well? I don't know, I'm a bit desperate as the battery lasts half a day with the stock rom.
Just to end this thread, nothing worked for me so I unlocked the bootloader, flashed nAa's kernel and got a new ROM compatible with it - it works like a charm now. Thanks for your support guys!
Hi fellows,
I need your guidance and expert advice in resolving a situation, I have ran into recently. I was trying to install CM10.1 on my brother's galaxy Note GT-N7000 international version which was running official ICS 4.0.4.
Since, I had experience in installing different ROMs on my Galaxy S2, Nexus 7 and Xperia Arc so I was not worried about it being a big deal. So, I followed the procedure described in this page http://techgoneinsane.blogspot.com/2012/08/installing-cm10-on-galaxy-note-n7000.html?m=1 and used Odin and file from 'speedmod' to gain root access and flash CWM which was successful. Then, as planned, I tried update zip in the CWM recovery for CM10.1 nightly. But, I came across error 'Status 7' installation aborted. This was new to me, so I tried few things like 'factory reset', wipe data etc and even tried installing stock ROM ICS XXLRK which was previously installed but no avail. I tried several other ROMs like stable CM9 and other nightlies but no success. The phone is stuck on the boot Samsung logo with yellow triangle. However, I'm able to go in the recovery and download mode.
Upon doing couple of Google searches, I came to know, quite a number of people have faced this error by I couldn't understand the fix properly so can anyone of you please guide me for the solution. Thanks.
Your help will be greatly appreciated.
perceptorz said:
Hi fellows,
I need your guidance and expert advice in resolving a situation, I have ran into recently. I was trying to install CM10.1 on my brother's galaxy Note GT-N7000 international version which was running official ICS 4.0.4.
Since, I had experience in installing different ROMs on my Galaxy S2, Nexus 7 and Xperia Arc so I was not worried about it being a big deal. So, I followed the procedure described in this page http://techgoneinsane.blogspot.com/2012/08/installing-cm10-on-galaxy-note-n7000.html?m=1 and used Odin and file from 'speedmod' to gain root access and flash CWM which was successful. Then, as planned, I tried update zip in the CWM recovery for CM10.1 nightly. But, I came across error 'Status 7' installation aborted. This was new to me, so I tried few things like 'factory reset', wipe data etc and even tried installing stock ROM ICS XXLRK which was previously installed but no avail. I tried several other ROMs like stable CM9 and other nightlies but no success. The phone is stuck on the boot Samsung logo with yellow triangle. However, I'm able to go in the recovery and download mode.
Upon doing couple of Google searches, I came to know, quite a number of people have faced this error by I couldn't understand the fix properly so can anyone of you please guide me for the solution. Thanks.
Your help will be greatly appreciated.
Click to expand...
Click to collapse
If you are on Speedmod's recovery (which is safe), you can try this:
1) Download the latest CM10.1 kernel and save it to your SD card.
2) Flash it in Recovery (Install zip from sdcard > choose zip from sdcard), then reboot in the new Recovery (advanced > reboot recovery).
3) Do a full wipe (even format preload and system in "mounts")
3) Flash the latest CM10.1 build
4) Flash the 4.2.2 Gapps
5) Do a data wipe / factory reset
6) Reboot
You got a yellow triangle because you flashed an unofficial kernel through Odin. To get rid of it, use TriangleAway.
Good luck!
Solved
Kortxero said:
If you are on Speedmod's recovery (which is safe), you can try this:
1) Download the latest CM10.1 kernel and save it to your SD card.
2) Flash it in Recovery (Install zip from sdcard > choose zip from sdcard), then reboot in the new Recovery (advanced > reboot recovery).
3) Do a full wipe (even format preload and system in "mounts")
3) Flash the latest CM10.1 build
4) Flash the 4.2.2 Gapps
5) Do a data wipe / factory reset
6) Reboot
You got a yellow triangle because you flashed an unofficial kernel through Odin. To get rid of it, use TriangleAway.
Good luck!
Click to expand...
Click to collapse
Thanks a lot man. Issue has been resolved by following your procedure and phone is working all fine with CM10.1 on it. Xda rocks!!!
perceptorz said:
Thanks a lot man. Issue has been resolved by following your procedure and phone is working all fine with CM10.1 on it. Xda rocks!!!
Click to expand...
Click to collapse
You're welcome. Glad I could help . If you feel like it, hit the Thanks button on Chasmodo's first message in the repository (where you downloaded your CM10.1 kernel). He really deserves it. You may also want to do the same on Entropy's first post in the unofficial CM10.1 thread :good: That way, you'll show your support and appreciation :angel:.
So the case was I reset my device, and later after i flashed a ROM into my device, it does not boot. Instead, it goes into TWRP recovery. And it goes to TWRP every time i boot my device.
I have done this for so many times and I cannot even know what is going wrong this time. I am quite frustrated and I did googled a lot but it did not solve my problem. So, I want to know if anyone else encounter similar problem and solution towards it.
I tried:
1. Wipe the dalvik cache.
2. Remove the battery for half an hour
3. Reflash the twrp
Any efforts and reply is much appreciated.
Thank you.
Mine's exactly the same, I factory reset so I could pass the phone on; and now it will not install custom roms, I've tried about 7 or 8, and it will only boot into twrp 3.0.2-5. Soft brick, but I'm unable to find any solution.
Here's hoping someone will come and help.
I think I'll have to reinstall twrp by connecting the phone to the computer, but I've no idea how to do this.
slifer225 said:
So the case was I reset my device, and later after i flashed a ROM into my device, it does not boot. Instead, it goes into TWRP recovery. And it goes to TWRP every time i boot my device.
I have done this for so many times and I cannot even know what is going wrong this time. I am quite frustrated and I did googled a lot but it did not solve my problem. So, I want to know if anyone else encounter similar problem and solution towards it.
I tried:
1. Wipe the dalvik cache.
2. Remove the battery for half an hour
3. Reflash the twrp
Any efforts and reply is much appreciated.
Thank you.
Click to expand...
Click to collapse
Exactly the same issue here too, installed lineage 14.1, was working great, I was selling to a friend, did a factory reset, now stuck at twrp, roms install etc, but after a reset, every time straight back to TWRP.
Looks like I might need to flash back to stock somehow.
But I did find this, but not yet tried.
https://www.reddit.com/r/LineageOS/comments/5riech/how_fix_twrp_recovery_boot_loop_after_lineageos/
andydgg said:
Mine's exactly the same, I factory reset so I could pass the phone on; and now it will not install custom roms, I've tried about 7 or 8, and it will only boot into twrp 3.0.2-5. Soft brick, but I'm unable to find any solution.
Here's hoping someone will come and help.
I think I'll have to reinstall twrp by connecting the phone to the computer, but I've no idea how to do this.
Click to expand...
Click to collapse
Well i have took the ultimate solution. Back to stock firmware fix everything. Well, i guess not much to mention on stock firmware=)
I think you should do the same thing too. Good luck.
slifer225 said:
Well i have took the ultimate solution. Back to stock firmware fix everything. Well, i guess not much to mention on stock firmware=)
I think you should do the same thing too. Good luck.
Click to expand...
Click to collapse
That is good to know, I shall attempt to do the same, did you later install a custom rom and everything was fine afterwards?
Yes, i flashed custom recovery and ROM afterward. Even several attempt on wipe and flash the new ROM. So i guess it should be fixed
Thank you.
andydgg said:
Mine's exactly the same, I factory reset so I could pass the phone on; and now it will not install custom roms, I've tried about 7 or 8, and it will only boot into twrp 3.0.2-5. Soft brick, but I'm unable to find any solution.
Here's hoping someone will come and help.
I think I'll have to reinstall twrp by connecting the phone to the computer, but I've no idea how to do this.
Click to expand...
Click to collapse
As slifer225 mentioned you can downgrade to stock firmware by installing the stock MM rom s433 version using spftools.
Download and Install stock MM rom using spftools.
Here is the link- https://cloud.mail.ru/public/Cco5/JYk3ytrW1
For further info follow this post- https://forum.xda-developers.com/k3-...3#post71749243
Follow this step by step guide to go back to unrooted stock rom. If you want to root after that then try installing custom recovery(twrp) again using spftools and flash supersu.zip using recovery. Do take a backup though before rooting your device.
---------- Post added at 10:11 AM ---------- Previous post was at 10:04 AM ----------
justwondering said:
That is good to know, I shall attempt to do the same, did you later install a custom rom and everything was fine afterwards?
Click to expand...
Click to collapse
Everything is working perfectly as I myself had gone through the same issue and did everything to fix the problem until I downgraded back to stock. Did root on my device again and installed lineage 7.1.1 and it works like a charm. One thing I love about this rom is the efficient ram management, lag free but battery management is not upto the mark but I guess we can work it out.
Whatever you do never forget taking a backup of functional rom.
Yes, I can confirm the solution worked for me, I left it with stock rom for my friend, I tried lineage 14.1 and did a factory reset, but ended once again with softbrick , lineage will install and work perfectly, but as soon as you do a factory reset, soft brick
Now I've hard bricked it. I loaded up a 'looprecovery' when it rebooted there's nothing, no charge light no vibrations PC doesn't see it, land fill?
Wondering...
justwondering said:
Exactly the same issue here too, installed lineage 14.1, was working great, I was selling to a friend, did a factory reset, now stuck at twrp, roms install etc, but after a reset, every time straight back to TWRP.
Looks like I might need to flash back to stock somehow.
But I did find this, but not yet tried.
https://www.reddit.com/r/LineageOS/comments/5riech/how_fix_twrp_recovery_boot_loop_after_lineageos/
Click to expand...
Click to collapse
I think that solution only works on Snapdragons. It didn't for me. Is there a solution for MTK devices?
the solution for this(FIX)
all we need to do is reinstall a stock recovery and the again reinstall the TWRP
https://forum.xda-developers.com/k3-note/general/ufficial-thread-lenovo-k3-note-t3102997
follow this link..my phone just got fixed
My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE
Infinity loop recovery
andydgg said:
Now I've hard bricked it. I loaded up a 'looprecovery' when it rebooted there's nothing, no charge light no vibrations PC doesn't see it, land fill?
Click to expand...
Click to collapse
hI MY FRIEND , you have been able to fix your K3 note, I have the same problem, I made twrp flash and went into infinite loop. Can you help? thank you
I smashed it and put it in the bin. I think once you can't get a charge light after tyring for a couple of week, it's dead.
Not working for Lenovo K3 Note.
My K3 note stuck in the twrp recovery after factory reset from the RR. I tried this solution but it didn't work.
Please help.