[Q] I think some help is needed in urgency and wisdom - Motorola Atrix HD

Hi everyone
After a lot of reading i decided to install a ROM. Now i was able to try to but none of them worked, so i ve been trying now for 3 days. I think i did it all as stated in this forums, it launched but never go to really open the OS, used to get stuck at the motorola or nexus logos or what ever logo from the different ROMs i downloaded.
I was able to go back to the original ROM but today im not being able to do so...
What can i do? Im at recovery and im able to restore boot but at system it says:Error while restoring /system!
I had it backedup at pc so i have also removed the one at sd card and tried with the one from PC.
What can i do (that doesnt involve getting another phone)

You can try RSDLite to flash back stock ROM just be careful and flash right ROM, otherwise you can brick your phone. You can't flash custom ROMs with RSD.

mm166 said:
You can try RSDLite to flash back stock ROM just be careful and flash right ROM, otherwise you can brick your phone. You can't flash custom ROMs with RSD.
Click to expand...
Click to collapse
Attempting in 3..2..1..................

It doesnt let me use decompress and flash... im decompressing and will see if there is an option to flash after that...

Ok my issue is that phone is not recognized by the RSD... i know update the drivers bla blaaa... how if its not recognized and the MDM needs the phone connected to be updated and in my country i know noone else with a damn Motorola phone... ideas ?

MrPersonality said:
Ok my issue is that phone is not recognized by the RSD... i know update the drivers bla blaaa... how if its not recognized and the MDM needs the phone connected to be updated and in my country i know noone else with a damn Motorola phone... ideas ?
Click to expand...
Click to collapse
Boot the phone into bootloader/fastboot?

You have an unlocked bootloader and custom recovery installed? I assume you have both since you were trying to install custom ROMs.

I have tried to the fastboot... im trying AP fastboot and theres where i am stuck right now.
Yes custome recovery and unlocked bootloader there. I had the phone moved to another couple of roms but the never loaded correctly so i went back to my original ROM, i tried a few other ROMs and none worked so this time i try to go back but it doesnt come back anymore... :laugh:

Try downloading PhilzAdvanced CWM Recovery. It is based off the latest CWM and should be able to flash your backups or ROMS. Maybe not your backups unless you made them with a CWM based recovery, but it should get you booted up.

kingatmos said:
Try downloading PhilzAdvanced CWM Recovery. It is based off the latest CWM and should be able to flash your backups or ROMS. Maybe not your backups unless you made them with a CWM based recovery, but it should get you booted up.
Click to expand...
Click to collapse
Is it possible to do that? I mean right now my phone only boots to fastboot you know... i may flash a rom (which didnt work with any from this forum neither with CM) but i cant install anything in my phone so... how can i do that?

MrPersonality said:
Is it possible to do that? I mean right now my phone only boots to fastboot you know... i may flash a rom (which didnt work with any from this forum neither with CM) but i cant install anything in my phone so... how can i do that?
Click to expand...
Click to collapse
1. Read the Myth Tools OP
2. Download Myth Tools
3. Download Philz CWM
4. Download a stock fastboot
5. Place the fastboot zip and the extracted recovery/cwm.img in their respected folders
6. Run Myth's executable and follow the instructions
7. If that doesn't work then read the faqs here and in the RAZR HD forums, all your questions have been answered already.

Still with same issue...
Phone is not recognized by the computer (tried 3 different laptops)
Cannot download the Drivers as its an automated process that begins when you connect the phone...
Does anyone knows an alternative to install AHD drivers ?

MrPersonality said:
Still with same issue...
Phone is not recognized by the computer (tried 3 different laptops)
Cannot download the Drivers as its an automated process that begins when you connect the phone...
Does anyone knows an alternative to install AHD drivers ?
Click to expand...
Click to collapse
Did you not see the mythtools menu option for drivers?
Sent from my MB886 using xda app-developers app

palmbeach05 said:
Did you not see the mythtools menu option for drivers?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Again, my main issue device not detected by pc... so i cant download drivers using automatic tools that detects the phone because again phone is not detected and mythtools goes straight to the motorola device manager which needs a phone connected to act... so in a very bad circle i am... and i would try to use someone else phone but here in Costa Rica i know of noone else with a Motorola phone... everyone thinks it no longer exists... and i havent found a way to download the specific drivers for my specific device in a way it doesnt require to be connected.

You can boot into recovery? If so download the latest philztouch cwm recovery, put it on your sd card, and flash it from recovery. Then flash the ROM you want.
Sent from my MB886 using Tapatalk

kingatmos said:
You can boot into recovery? If so download the latest philztouch cwm recovery, put it on your sd card, and flash it from recovery. Then flash the ROM you want.
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
Nice i managed to flash the philztouch recovery... the damn phone doesn't want to accept any ROM... keeps aborting them. So far thanks a lot... ill read like crazy today again and ill ask for help if failure salutes me again!
:highfive:

If you made a backup of your stock after rooting try flashing that and then hooking your phone up to your pc
Sent from my MB886 using Tapatalk

It finally works
It works... i think somehow the recovery stopped working at some point... now with Philz phone was recognized by pc and i was able to use Myth tools to do the job. I think this will be my last Motorola...
Things to highlight:
1 i did read a lot before doing anything, still somehow screwed up, did read lots before asking here, still needed to ask... got answers, still needed to ask more... it was fun as everyone at work said: " its bricked fool buy a new one and stop playing to be good at something" but hell yeah its fixed!
2 i will try again to install another rom, i wont give up damn it!
3 i might begin with my wife Note 1, its old so its ok to brick it ha ha ha
4 damn it guys you are cool... wish i were 10% of you guys!
5 I think instead of all those different options out there we should recommend only to use the myth tools, its a complete package and its easy to use even with examples for newbies like me.
Again thanks and questions on friday after i brick it again e he he he...

The other stuff is there so you can understand what the automated stuff is actually doing.
Sent from my MB886 using Tapatalk

Ok so i have started the process again. I cant tell what i am doing wrong. I have flashed 2 different roms and none worked... its like im missing something.
I root the device, unlock bootloader... set the recovery with cwm... flash the rom... and it goes to moto logo and then black screen... am i missing something?
I did the exact same for the stock rom and it did work... also i did it all exactly the same using now myth tools... so any ideas? Should i leave the phone alone because its just simply not going to work or am i missing anything?

Related

[Q] htc hero soft bricked can't boot out of recovery. HELP!

I bricked my hero trying to flash gingerbread. Either because i didn't flash a kernel or i might have overlooked something i should've read. But my phone bricked. Long story but i ended up having to put my sdcard in a friends phone and formatting it, then downloaded something i found on G1 forum and dropped it on my sdcard (not smart i know). Then i took my sdcard out of his phone with that file on it and put it back in mine. Whatever that file was allowed me to now be able to boot into my recovery again/HBOOT&Fastboot. But i CANNOT boot past recovery. I didn't have a nandroid backup anymore since i formatted so i grabbed a 2.1 ROM off of here, something stable, and figured i could drop it on the sdcard and flash it. but nothing. Either it's not completely flashing the ROM, or sometimes it aborts it. So i tried a cm6 ROM. Same thing. It won't flash ANYTHING. Could my recovery have gotten damaged when i formatted my sdcard? i'm using clockworkmods 2.5. I'm on a mac that i recently had to factory reset. i downloaded sdk last night to try to manually install a different recovery. but i can't use htc sync since it's for pc. so i found a another program that will replace htc sync, but i still can't sync because i have to enable usb debugging for it to sync to my phone. and i don't know how to enable usb debugging from recovery. It has blown my mind. i have no idea what to try anynore. If anyone can help out at ALL. please do.
Try going into recovery and going into the partitions menu.
Inside that menu, format the system before you flash another ROM.
Factory reset skips over the /system file.
Try that and let me know what happens.
(I'm assuming you dont have data or anything since you factory resetted)
I guess. Disclaimer: this deletes data
hmm.
Okay so i booted into recovery.
Did a full wipe even though there isn't anything to wipe.
Then formatted the system.
Then installed zip.
Then Reboot system now.
I gave it 15 minutes just to be sure, and it never left the boot logo.
Again like i said it isn't completely flashing the ROM.
It unzips it and gets to where it says "installing package"
and just stops.
From the time i select the zip file that i want to flash, till the time that it says it's done, takes maybe 5 seconds.
That's why i thinking it's my recovery. It might be damaged or something.
If there was a way to enable usb debugging from clockworks recovery then i could manually install a different recovery. butt... i'm getting no where.
Get to a PC 1st and foremost. Go to the HTC website and download the RUU stock. Nevermind about adk and USB yet. You need to be back to stock to have a clean backup again. Once you have downloaded the stock rom be patient and charge the phone beforehand. Hopefully this gets you to stock again. Google Z4root, download and place in the root of the SD. In the market get an apk installer an install Z4. After run Z4 for root. Download and install clockwork after that and make sure you flash the recovery at the top before backing up. Then after that try installing 2.3 but let me know which rom you are trying to use. The one I have needed an different version of clockwork so read carefully. Hope this helps.
mmm a Gingerbread SuperHero....
Also redownload the rom. Could be a bad download.
mmm a Gingerbread SuperHero....
okay i'm going to try that. it's been so long since i've downloaded an RUU or Rooted. Can i flash the RUU like any other? will it be a zip file? Because back when i rooted and had to download the RUU before i could root, i think i installed it using htc sync. But my phone can only be recognized as a storage device. Since i cant enable debugging. I'll see what happens cause the only way i can think to get the stock ROM on there is to flash it. But seeings as how nothing else in the world is completely flashing i might stumble.
It's definitely not the ROMs i've tried like 5 or 6. Three of them being one's i've recently had on there. Oh and I didn't think there was but one Gingerbread ROM out for the hero. And was it the 3.0 clockworkmod? Cause that's what i skipped over thinking it was just extra, Since i had just updated my clockworkmod in ROM manager to 2.5
Wait if i go back to stock. isn't there a chance of loosing root forever?
KarrmaBeats said:
Wait if i go back to stock. isn't there a chance of loosing root forever?
Click to expand...
Click to collapse
No, you just reroot..
KarrmaBeats said:
Wait if i go back to stock. isn't there a chance of loosing root forever?
Click to expand...
Click to collapse
I "Had" a Similar Problem...
What worked for me was 1 of the 2?
Because I did Both Steps, I'm not really sure what actually fixed it, but all I cared about was it being fixed! With that said, try this!!
1st thing I did was Reflash the Radio, 2.42.02.10.29.zip
2nd thing I did was Wipe Everything, then Flash a New Kernel "I Used Deca's #43" If that Doesn't Work Try DecaFuct #589!
Hope this Helps!
Sent from my HERO200 using XDA App
Okay i'll try that! Because i can't even go back to stock since i can't sync with any computer. Because i can't enable usb debugging. Unless there is a way to flash a stock RUU.. i even tried different things in fastboot but it didn't work apparently because of usb debugging. (that's what someone else said). But I will try that and I'll let you know how it goes!
That didn't work either.
Are you using Windows XP to get all this done? I would try finding a PC that has Vista. Or try another PC all together. IDK, just a thought, give it shot, you don't have anything to lose. I wish you luck my friend.
You definitely need the 3.whatever clockwork flash that goes with the gingerbread that's posted here. Clockwork turns orange once its done right. Also don't use setcpu. Adw fc's a lot with it. But that's for later info. For now..
If your able to get into recovery you can save yourself. Rooting again is very one click simple with Z4 in my first post. You need a stock rom to save yourself now though. GET TO A WINDOWS COMPUTER at least with Vista but works great with 7.
............. mmm a Gingerbread 2.3 SuperHero....
Don't forget to WIPE! VERY IMPORTANT
mmm a Gingerbread SuperHero....
MattCrystal said:
Don't forget to WIPE! VERY IMPORTANT
mmm a Gingerbread SuperHero....
Click to expand...
Click to collapse
LOL I still tell my 18 yo boy that everyday.
lmao! Damn kids
Best bet is to get to a Windows computer, preferably Windows 7. Plug it by USB and you need to get the drivers working for Sync to work at all and get USB debugging back on your phone. Leave the phone off before plugging it in. Plug it in and if the amber light comes on, if so turn on the phone and windows should give a USB notification and try to install drivers. This needs to happen if you want to get back to stock. And you do want back to stock to backup to in case you ever need to take it back to Sprint. They will flag your phone/account so you can't take it anywhere if you show them it's been rooted or custom rom anything. Z4 will also let you unroot the phone to do this.
If all else, I'd try flashing a different rom all together REMEMBER TO WIPE 1ST! then flash the rom. Maybe this will get it to fully install and enable usb, which the 1st thing I'd do when you get going again is get back to stock, root, and backup right away. Hopefully something works for you but let us know please. I'm pretty intrested in how this turns out for you and maybe can help others in this type of case.
Guys please read what all i've said before posting. I'm not completely stupid. i've tried flashing more than just one rom. i tried flashing about 6 roms, a radio, an two different kernels. Nothing flashes. no yellow progress bar... i have a bad recovery. And i can't go back to stock or manually install a new recovery or anything that includes htc sync because i can't enable usb debugging.. i've tried on a windows 7 computer, and have htc sync on it.
If you cant flash anything in recovery, nor can you enable usb debugging. (to convert to stock, or fastboot intalling, or manual intalling, adb, ect... ) then what am i supposed to do?
I think i'm the first person in the world to have this problem on a hero.
MattCrystal said:
lmao! Damn kids
Best bet is to get to a Windows computer, preferably Windows 7. Plug it by USB and you need to get the drivers working for Sync to work at all and get USB debugging back on your phone. Leave the phone off before plugging it in. Plug it in and if the amber light comes on, if so turn on the phone and windows should give a USB notification and try to install drivers. This needs to happen if you want to get back to stock. And you do want back to stock to backup to in case you ever need to take it back to Sprint. They will flag your phone/account so you can't take it anywhere if you show them it's been rooted or custom rom anything. Z4 will also let you unroot the phone to do this.
If all else, I'd try flashing a different rom all together REMEMBER TO WIPE 1ST! then flash the rom. Maybe this will get it to fully install and enable usb, which the 1st thing I'd do when you get going again is get back to stock, root, and backup right away. Hopefully something works for you but let us know please. I'm pretty intrested in how this turns out for you and maybe can help others in this type of case.
Click to expand...
Click to collapse
haha if you turn it on while it's plugged in, it goes into fastboot usb. Which i tried running commands but like i said.. there's no way to enable debugging so i get "device not found" in return on cmd.
Hey Karrma, go to this post and try this. http://forum.xda-developers.com/showthread.php?p=8551240&highlight=hercimg.zip#post8551240
It worked for me after I borked my hero and couldn't do anything but fastboot.
Hope it works for you.

Bricked my captivate, Tried many thing

So i replace an odex file which i shouldnt have and the phone wouldnt boot. I tried to delete cache and partition to reinstall a rom but CWM wouldnt read my sd, just the interal one. My phone was recognizing in odin one click and now it says device not recognized. I can still enter download mode with the volume up/down but it still wont recognize. I really need help so anything would be great.
Thanks - MaDDaWg
Boot into the bootloader if you can and do a full complete recovery back to stock settings and reroot from there.
I Haz 3D!
Im kind of a noob, i only know how to go into download mode on the phone. how do i get into bootloader. also what would i recover it.
thanks.
MaDDaWg836 said:
Im kind of a noob, i only know how to go into download mode on the phone. how do i get into bootloader. also what would i recover it.
thanks.
Click to expand...
Click to collapse
Since I dont know about the captivate that much it should not be different by much since its android. You need to download the STOCK ROM for your phone. Basically it is the software your phone came with out of the box. You need to put it on your zipcard and boot into bootloader(ask a fellow captivate owner how to get into this) and it will recognize the stock rom zip if named correctly and automatically update/restore your phone. Then you can reroot and install your recovery and start all over.
I Haz 3D!
Thanks for the help man, i was able to reflash it eventually. the weird thing is that now if i connect as mass storage once, it wont do it again without restarting the phone.
Are you plugging your phone into a USB port that's closest to the motherboard? Odin is finicky. Is your USB cable good? What Rom were you running when you messed up your phone?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
I was using the front USB ports. the cable is good i just got the phone and its been working. I was using 2.2, which is what came on it. i dont know the exact rom that was on it but i believe it was stock. i was thinking about putting the cyanogenmod on it now. Do you think its better than stock?
MaDDaWg836 said:
I was using the front USB ports. the cable is good i just got the phone and its been working. I was using 2.2, which is what came on it. i dont know the exact rom that was on it but i believe it was stock. i was thinking about putting the cyanogenmod on it now. Do you think its better than stock?
Click to expand...
Click to collapse
Anything is better than stock. I haven't tried CM7, I am using Continuum.
Sent from my SAMSUNG-SGH-I897 using Tapatalk

[Q] Need to straight up nuke my I9000 - Many an issue

Hey guys, it's been a while!
Anyway, before I even got my I9000 I had everything sorted to install Darky's ROM and the Speedmod kernel. Some time between them working perfectly and now, I plugged the phone in to Kies and it has tried to update me to GB. SM and DR did not like this.
I managed to do a factory reset (or whatever it is in CWM), and that got the phone to boot, but it isn't pretty. I get the kind of graphical messing up that a dying GPU would render whilst booting the phone, it reboots 25% of the time I am using the music player, and I can NOT boot in to download or recovery any more. I already tried plugging it in to Kies in the hopes it could just wipe the phone over and start again, but it simply does not recognise it.
Likewise, I would look in to the files I need to just do the equivalent of a full format with Odin/ADB, but without download mode I don't think that would even work.
So, the question is; just what the **** am I supposed to do?
USB recovery jig.
can you get into your phone ??????????? I mean can you reach Settings ???? because I didnt read all your speech .
Search for "recovery.tar" and flash it with MOBILE Odin, this would give u cwm and flash a new rom in cwm or flash a stock rom with mobile Odin. Good luck
snapper.fishes said:
USB recovery jig.
Click to expand...
Click to collapse
Hmm, good idea. I'll see what I can do.
hassanalip21 said:
can you get into your phone ??????????? I mean can you reach Settings ???? because I didnt read all your speech .
Click to expand...
Click to collapse
Phone is more or less functional, it's just that I can't get in to Recovery or Download. At all.
zodiaxe66 said:
Search for "recovery.tar" and flash it with MOBILE Odin, this would give u cwm and flash a new rom in cwm or flash a stock rom with mobile Odin. Good luck
Click to expand...
Click to collapse
Mobile Odin? Interesting, will look in to it.
EDIT: This recovery.tar; should it be on my phone already or do I have to find one? Because Astro can't find jack **** on my phone.
EDIT2: Scratch that, found it. Trying to flash it using "Open File..." has just resulted in it being stuck at:
"Flashing...
Flashing Kernel..."
for the last 10 minutes...
Thanks for the replies so far guys!
solved it ???????????
Nope. Sorry, I have been editing that post rather than enter new posts (until someone else posts, of course).
EDIT: Still flashing...
Ok, it now won't boot at all (stuck at the Samsung splash load screen), BUT, importantly, I can get in to download mode and CWM recovery.
What do I download and do to entirely wipe the **** out of this phone and start again?
EDIT:
Fixed. Sorted. Thanks for your help guys, it is much appreciated.

I have a paperweights, help...

I have root and unlocked bootloader. I did an update of lg and thereafter blocked, do not know if this was the problem.
Install the CWM by room (room enox iodak08 +), I can enter the bootloader, installing, when reboot the sistem entering the boot but does not start with the system and back to CWM after being taken. I can not get into the room and I can get into CWM. I've done factory reset and wipecache, I returned instal to the room, and nothing, enters the boot but does not start with the room.
I'm in a tricky situation, I stopped to have a mobile phone and I stick one paperweights. Need a little help.
Manholas said:
I have root and unlocked bootloader. I did an update of lg and thereafter blocked, do not know if this was the problem.
Install the CWM by room (room enox iodak08 +), I can enter the bootloader, installing, when reboot the sistem entering the boot but does not start with the system and back to CWM after being taken. I can not get into the room and I can get into CWM. I've done factory reset and wipecache, I returned instal to the room, and nothing, enters the boot but does not start with the room.
I'm in a tricky situation, I stopped to have a mobile phone and I stick one paperweights. Need a little help.
Click to expand...
Click to collapse
As always - flash a kdz and start from scratch if you can't get it working. And ... SEARCH
SimonTS said:
As always - flash a kdz and start from scratch if you can't get it working. And ... SEARCH
Click to expand...
Click to collapse
I can not get the pc to recognize the phone. I already have the KDZ file (V20A_00.kdz)
Manholas said:
I can not get the pc to recognize the phone. I already have the KDZ file (V20A_00.kdz)
Click to expand...
Click to collapse
Install or reinstall latest drivers from LG and try again when it does'nt work change usb port or try it on other PC.
Good Luck..
as I am in CWM recovery, removed the sd card and put a room.zip and flash. Did the installation but when "reboot sistem" back to cwm recovery.
The problem is that the Phone was locked into CWM recovery. And I have no way to recognize the phone on PC. Is there any way to unlock the CWM recovery v6.0.4.5?
Manholas said:
The problem is that the Phone was locked into CWM recovery. And I have no way to recognize the phone on PC. Is there any way to unlock the CWM recovery v6.0.4.5?
Click to expand...
Click to collapse
no. boot into s/w mode and flash kdz. there are plenty of guides. if your pc cant detect your phone while it's in s/w mode, then reinstall drivers
Manholas said:
The problem is that the Phone was locked into CWM recovery. And I have no way to recognize the phone on PC. Is there any way to unlock the CWM recovery v6.0.4.5?
Click to expand...
Click to collapse
As you stated in your first post...
Manholas said:
I have root and unlocked bootloader. I did an update of lg and thereafter blocked, do not know if this was the problem.
Click to expand...
Click to collapse
It has been stated time and time again that your must NEVER carry out a vendor OTA on a rooted or modified device. It causes a problem 90% of the time as the OTA has no flexibility to deal with something it isn't expecting to find - so you get exactly what you have.
Just be thankful that it is almost impossible to hard-brick our device or you really would have a paperweight. Instead you just need to search and read a little to get it back up and running.
Flying_Bear said:
no. boot into s/w mode and flash kdz. there are plenty of guides. if your pc cant detect your phone while it's in s/w mode, then reinstall drivers
Click to expand...
Click to collapse
If you turn on the mobile it goes into CWM recovery. The problem is that the Phone was locked into CWM recovery. And I have no way to recognize the phone on PC. Is there any way to unlock the CWM recovery v6.0.4.5?
SimonTS said:
As you stated in your first post...
It has been stated time and time again that your must NEVER carry out a vendor OTA on a rooted or modified device. It causes a problem 90% of the time as the OTA has no flexibility to deal with something it isn't expecting to find - so you get exactly what you have.
Just be thankful that it is almost impossible to hard-brick our device or you really would have a paperweight. Instead you just need to search and read a little to get it back up and running.
Click to expand...
Click to collapse
Ok, thanks for the warning was a real oversight. But, .. and help. I'm just locked into CWM recovery and I can not enter the phone otherwise. thanks
Flying_Bear said:
no. boot into s/w mode and flash kdz. there are plenty of guides. if your pc cant detect your phone while it's in s/w mode, then reinstall drivers
Click to expand...
Click to collapse
Manholas said:
Ok, thanks for the warning was a real oversight. But, .. and help. I'm just locked into CWM recovery and I can not enter the phone otherwise. thanks
Click to expand...
Click to collapse
As @Flying_Bear has already said to you...
Manholas said:
Ok, thanks for the warning was a real oversight. But, .. and help. I'm just locked into CWM recovery and I can not enter the phone otherwise. thanks
Click to expand...
Click to collapse
You need to get your PC to recognise the phone, thats the first step in this repair (unless the usb port is broken, there's no reason why it wont recognise, whats your OS and version, usb 2 or 3?)
why not put cm10.1 on a microsd and flash it from there?
JoinTheRealms said:
You need to get your PC to recognise the phone, thats the first step in this repair (unless the usb port is broken, there's no reason why it wont recognise, whats your OS and version, usb 2 or 3?)
why not put cm10.1 on a microsd and flash it from there?
Click to expand...
Click to collapse
it still won't work, after upgrading it ota while having custom recovery installed, a person will be locked to recovery for some reason (atleast other people were). the only way to fix it that i know of is to reflash a kdz
Manholas said:
If you turn on the mobile it goes into CWM recovery. The problem is that the Phone was locked into CWM recovery. And I have no way to recognize the phone on PC. Is there any way to unlock the CWM recovery v6.0.4.5?
Click to expand...
Click to collapse
cmon, pay some attention you don't need to turn on the phone, or boot into the system itself to boot into s/w mode. now, there are tons (like 3 or 4 guides, plus many other topics opened by people with exact same problem like you) threads that tell you what to do (hint: figure out how to boot into s/w mode), so i'll let you search around for the guide.
I suggest using this method: http://forum.xda-developers.com/showthread.php?t=2682146
It's easier, faster and safer than flashing a .kdz file. (Plus, it tells you how to get into the s/w upgrade mode!)
Greetings from my Nexus 7 FHD!
balloon27 said:
I suggest using this method: http://forum.xda-developers.com/showthread.php?t=2682146
It's easier, faster and safer than flashing a .kdz file. (Plus, it tells you how to get into the s/w upgrade mode!)
Greetings from my Nexus 7 FHD!
Click to expand...
Click to collapse
I think this method also flashes a kdz, but does it automatically for you. But yeah, this one is easier than manually flashing. Thanks for posting it
Also, thiy method will format internal sd card. My suggestion is to do a data/system format from cwm before you go in to flashing a kdz, either manually or automatically, so you don't end up with formatted internal sd card
A big thanks to SimonTS, JoinTheRealms, Flying_Bear and balloon27. This is a fantastic forum and you guys are spectacular. Due to professional reasons only going back to the forum after seven days, I go to the sea and I'm without net. Got this getaway just to thank you for the care provided, the mobile phone is the same and will just touch it after a week. Once again, thank you very much.
I just make the process advised by balloon27 (http://forum.xda-developers.com/show....php?t=2682146). I have my 4X hd back .... yupi, yupi, yupi, yupi, yupi, ..... you guys are just the greatest. Once again a big thank you all of you. The 4X HD is working like a charm, a thank-you to the forum.

[Q] Can I send a rooted phone in to LG for repair?

OTA bricked phone, still booting to Cyanogen, can't restore from nandroid, just boots back into CWM...if I send that in to LG as a last ditch effort, is it covered?
JoeProcopio said:
OTA bricked phone, still booting to Cyanogen, can't restore from nandroid, just boots back into CWM...if I send that in to LG as a last ditch effort, is it covered?
Click to expand...
Click to collapse
Can you get into Download mode?
http://forum.xda-developers.com/showthread.php?t=2448960
Hey Matt, no download mode...only CWM...when I try to restore a backup, it goes through the restore and then boots back into CWM. I've tried everything I can that I have found on here...even the ubuntu way, but I can't even see the device with ubuntu...something about qualcom drivers that I can't install.
the LG Flash tool requires download, I've been through that process before. I was hoping that since I can still get into CWM, i would still be good, but alas, NOTHING WORKS, lol.
JoeProcopio said:
Hey Matt, no download mode...only CWM...when I try to restore a backup, it goes through the restore and then boots back into CWM. I've tried everything I can that I have found on here...even the ubuntu way, but I can't even see the device with ubuntu...something about qualcom drivers that I can't install.
the LG Flash tool requires download, I've been through that process before. I was hoping that since I can still get into CWM, i would still be good, but alas, NOTHING WORKS, lol.
Click to expand...
Click to collapse
Are you using the LG cable that came with the phone for your download mode attempt? I thought I read others have issues when not using it. If you are, sorry, no other ideas here.
mjones73 said:
Are you using the LG cable that came with the phone for your download mode attempt? I thought I read others have issues when not using it. If you are, sorry, no other ideas here.
Click to expand...
Click to collapse
yes, the LG cable that came with the phone
i can get into sideload mode, but can't send any other rom to the phone, only CM roms start to load, but then nothing...everything else says cannot read sideload
ADB push isn't working right either, maybe I'm doing something wrong with the command, but i've done it before on other phones...maybe LG is weird

Categories

Resources