Related
I had loaded the ginger clone rom and all was well. I then however wanted to swap kernels so i loaded up seitrons cwm 1.5.6 and proceeded to flash through cwm. this has now become the worst day of my life. the phone will not boot past the galaxy s screen. i cannot not get into recovery and both computers now say usb device not recognized when in download trying to flash odin. i am worried that something is corrupted on my phone because not matter how many times i uninstall and reinstall the drivers no luck. i think it is officially bricked and im sol. maybe some great minds can figure it out here.
It's not bricked - issue is trying to get your computer to recognize your phone when in download mode so you can flash it back.
What OS are you running? Also - where did you download the drivers from? Some seem to work better than others.
If you can get to the galaxy screen you might still be able to to get into recovery. pull out the battery and use the 3 button combo. Hold down both volume button then power and let go of the power button after it turns on. then just reinstall the rom
I'm willing to bet you can also get into Download Mode either with button combos, or a JIG. Once in Download, you can use Odin to restore to JF6, and have a working phone to flash around with again.
i can get into download mode no problem. and i think it is quite possible drivers are corrupted on the phone itself. my wifes phone works on the same exact setup. no usb device not recognized error. i have tried the drivers from here and samsung directly with no luck. 3 button combo does not work. sim out sim in battery out and in. but like i said it will just not register with the comp and hers will. so im going to att and seeing about replacing it. but i will see how that goes. ive done this lots of times with no issues ever.
download works
3 button combo does not so no recovery
usb device not recognized error
thanks for the help and keep it coming i will try everything if i haven't already.
Try current usb port
Sent from my SCH-I897 using XDA App
Think I'm in worse shape. Tried flashing just the kernel to get BLN working again (last ROM I put on somehow loaded a non-compatible kernel). Now the phone boots the white ATT screen and just sits there. Can't get it into D/L mode with 3-button and doesn't respond to computer I have been using to flash ROMs for a couple weeks now...
Am I hosed? ANY help would be greatly appreciated...
You could try to use a JIG to force your phone into Download Mode
Okay...well, got into D/L mode finally. Used Odin to get it back to factory. Used the One Click rooter again, except now it boots to recovery 3e, which doesn't let my power button work as the okay button Pulling the battery to reset it, but it will no longer go into D/L mode to use Odin again. It keeps booting to the recovery Utils, which I cant get out of...*sigh*
Thoughts?
at least your able to do something i still cannot get my phone into recovery or to be recognized by the computer. it is not the drivers so i have no idea. i can only think that something got funked up with the kernel flash.
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
magnumrt562 said:
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
Click to expand...
Click to collapse
i actually tried this yes. i had a blackberry cable from the storm (shivers) that was laying around. tried that but no luck with that or my wifes cable as well. but a good tip for others nonetheless
Pirateghost said:
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
Click to expand...
Click to collapse
I just want to quote this to stress the importance.
Thank you, didn't realize that (still sorta new to this)...
I downloaded a zip (I thought from here somewhere) that extracted into the 4 files. Anyone got a link to the JH6 set of files?
I also downloaded DG's "One Click Odin", but it doesn't seem to really do anything when I run it unless I manually load all the files. Also, I don't see a "Master Clean" like the post refer too
are you sure you downloaded the right odin? in the one click version, theres no option to load files at all. only a "start" and "master clear"
make sure the odin one click is open before you connect your phone.
http://forum.xda-developers.com/showthread.php?t=731989
You guys rock! I don't know how, cause I could have sworn I D/L'd it from that link before and I got the generic Odin, but it looks like I have the right one now! Thank you for your patience with us noobs as we start getting into this new world!
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
zippox180 said:
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
Click to expand...
Click to collapse
I was having the same problem. Have you tried powering off, start odin, hold both the volume up/down, then plug in the usb to your phone?
Hi, I have a SS/ATT Galaxy S. It was working fine. I made the mistake of running an update to change the ATT splash screen. The device boots to the ATT splash screens and stays there. You can hear the SS start up sounds as though the unit booted ok.
I've tried various Odins they all hang on file analysis. I've tried using different computers per the recommendations in the various threads. I've tried many of the one click and also separate file updaters. They all hang on file analysis.
I am able to use Droid explorer to view the device. I've also put a new update.zip on an sd card but nothing seems to change the splash screen.
I'm not sure how to tell what version the unit is currently on.
I can get to the 3 button state. It says Android System recovery <2e>.
I have the options to reboot, reinstall packages, delete all user data and delete cache data. I've tried each of them, no change.
I have tried to read many threads before bothering anyone. Your input would be appreciated.
Thanks
if you have the update.zip on your phone, in the root of your SD card.. then from 2eRecovery, select reinstall packages.. may have to do it twice. That will boot your phone into clockworkmod recovery.. and from there you should be able to mount storage- put a ROM on your device, flash and be good to go.
Reply to thread
Hi, Thanks for the fast response. I've tried update.zip on both an sd card and also via droid explorer, about 5 times. If I reboot, same thing, the ATT splash is there, and the Galaxy boot sound. I can get into recovery and droid explorer works. If I try Odin it hangs on file analysis. Anything else I can try? Thanks again.
Are you in dl mode when you try this, or recovery?
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
If you can get to dl mode try using AIO Captivate to flash back to stock 2.1. I've had success as I flashed with the partition checked and had to go all the way back using ODIN contained in the AIO Captivate program. Found here
Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
Yeah if you can get into download mode than you are not bricked. I would Odin or Heim back to JF6 and go from there. What happened when you tried reinstalling packages from 2e? I know you said everytime you reboot- but what did it say when selected reinstall packages?
Sent from my SGH-I897 using XDA Premium App
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Great.. glad to hear it
Sent from my SGH-I897 using XDA Premium App
Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Now on to some real ROM flashing!! Glad you got it working. I did almost the same thing and was sweating bullets.
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Delphin9 said:
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Click to expand...
Click to collapse
Of course it is worthed it to move to 2.3 I mean, it comes with so many more features and is running just perfect as a everyday rom. You shouldn't be disapointed
Sent from my Mosaic powered I896 using Tapatalk
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
mrhaley30705 said:
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
Click to expand...
Click to collapse
+1.
I had to make a jig when I soft bricked it. Not fun. Since then I purchased one and am glad I did.
Well, that means I won't have wasted my $2.00.
I saw this and thought it worth to try. http://www.youtube.com/watch?v=D0aoabVtPJ8
In your footer, it says you're using mosaic.
e.g. ROM: Mosaic III, ¤Kernel: Xcal's #14, ¤Modem: JK4, ¤Launcher: ADW Ex
Can you point me to the correct files/process? I guess I'm scared of screwing it up again. when I look on the forum there's almost too much info for a noob to choose which is best. Cheers...
I am working on a friend's captivate (att) and I have him running cognition ROM right now. Unfortunately, it still sucks and he hates his phone. I want to flash cyanogenmod to the phone, but I need to restore it to stock first (I think). I am trying to use AIO tool to flash the phone to stock, but ODIN hangs when I start it. Is there another way to switch ROMS without flashing back to stock first? I don't have to flash to stock with my Optimus V, so why it the Captivate such a PITA phone to mess with? Please help me. I am tired of my buddy complaining about his phone every day.
super coffee said:
I am working on a friend's captivate (att) and I have him running cognition ROM right now. Unfortunately, it still sucks and he hates his phone. I want to flash cyanogenmod to the phone, but I need to restore it to stock first (I think). I am trying to use AIO tool to flash the phone to stock, but ODIN hangs when I start it. Is there another way to switch ROMS without flashing back to stock first? I don't have to flash to stock with my Optimus V, so why it the Captivate such a PITA phone to mess with? Please help me. I am tired of my buddy complaining about his phone every day.
Click to expand...
Click to collapse
If the phone doesnt have the gb bootloaders then you can flash CM7 using any kernel with clockworkmod recovery.
Sent from my SGH-I897 using XDA Premium App
I really wouldn't recommend CM7 if your friend isn't into phone development on his own, especially the nightly builds. However, if you're dead set on doing that, just do it without the AIO tool. Flash to stock with Odin one-click and root the phone some way (superoneclick is preferred) and then just follow the steps. Well, you actually don't require stock so long as your phone is rooted and not running GB bootloaders, but it's always safe to just go back to stock anyways.
For some reason though, ODIN will not flash to stock. Sometimes it will get as far as flashing modem.bin, but then it just hangs. It made it all the way to filesystem.rfs once, but again, it hung up. What is going on here? Is it my PC or do these phones just do that?
It could be a variety of problems. I'd reinstall the drivers and ODIN on your computer, because something may not have installed correctly. I know that I've never had any issues going back to stock with ODIN.
Now after failing so many times to flash the phone, I can't even get it to go into download mode anymore. I am using the volume up+volume down and plug usb method, but that all of a sudden will no longer start the phone. I am afraid that I may have bricked it. Any ideas?
super coffee said:
Now after failing so many times to flash the phone, I can't even get it to go into download mode anymore. I am using the volume up+volume down and plug usb method, but that all of a sudden will no longer start the phone. I am afraid that I may have bricked it. Any ideas?
Click to expand...
Click to collapse
Is it doing anything? Showing any power?
Sent from my SGH-I897 using XDA Premium App
super coffee said:
Now after failing so many times to flash the phone, I can't even get it to go into download mode anymore. I am using the volume up+volume down and plug usb method, but that all of a sudden will no longer start the phone. I am afraid that I may have bricked it. Any ideas?
Click to expand...
Click to collapse
Try the ADB method, instructions on this page:
http://forum.xda-developers.com/showthread.php?t=884364
If all else fails, building a jig is very easy and cheap. My best guess is you had something installed incorrectly on your computer and when ODIN tried to do its thing it froze and then "software-bricked" your friend's captivate.
Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.
yakobo said:
Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.
Click to expand...
Click to collapse
You'll have to use the full Odin program and grab a stock ROM from the development section. Once your in download flash stock ROM with through Odin or heimdall. I'm not next to my computer so I don't feel like fishing for links ..but should be fairly easy!
Sent from my SGH-I897 using xda premium
yakobo said:
Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.
Click to expand...
Click to collapse
This is a Odin 1 click for KB1 2.2 stock. After that follow any roms instructions except if it says stock 2.1 ignore it and assume its stock 2.2
I was wondering if I should follow this thread??
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Might I ask do you need to get to 2.1?
prbassplayer said:
Might I ask do you need to get to 2.1?
Click to expand...
Click to collapse
When I got my phone (about a two weeks ago) it came with 2.2 already on the phone. I don't need to get to 2.1 but I was thinking I'd go to 2.1 and then upgrade to 2.2 using att? If I can?
But why? If you got it as is and its stock its att's 2.2. At any rate If your so inclined on flashing 2.1 the one you mentioned thats using full Odin with pit should work. I suggest doing it if and only if you have that jig handy. Also keep in mind that .tar probably has bootloaders in it (wich is a risk you really dont need to take) just my 2 cents
prbassplayer said:
This is a Odin 1 click for KB1 2.2 stock. After that follow any roms instructions except if it says stock 2.1 ignore it and assume its stock 2.2
Click to expand...
Click to collapse
Links in that thread seem to be broken:/ So I suppose I can't use that.
Ive never used this one but it is also a KB1 2.2 KB1
My ultimate goal is to get Andromeda3 on my cappy. It seems to be a good rom. Could I just flash that using oden? (put it in the pda slot) or will that not work until I go back to stock?
With this new thread you linked me to, Just put in odin and I should be good to go? Thank you for your help by the way.
Ive never used that rom. Follow their instructions and assume stock is 2.2 for you. Also The original link i sent you should have worked. Aperrantly mediafire.com is having issues tonight.
installing Andromeda3 doesnt require going back to stock, 2.2 or 2.1.
ODIN flash a custom CWM kernel
boot to recovery
flash rom
thats it
Pirateghost said:
installing Andromeda3 doesnt require going back to stock, 2.2 or 2.1.
ODIN flash a custom CWM kernel
boot to recovery
flash rom
thats it
Click to expand...
Click to collapse
I can't because I bricked my cappy. i can't go into recovery right now. I need a jig to get back into download mode to fix it.
prbassplayer said:
Ive never used that rom. Follow their instructions and assume stock is 2.2 for you. Also The original link i sent you should have worked. Aperrantly mediafire.com is having issues tonight.
Click to expand...
Click to collapse
Once I get my jig hopefully mediafire is up and I can download from the first link you sent me. That seems to be my best bet right now. Thank you for your help. I sure hope I can get my phone backXD
yakobo said:
I can't because I bricked my cappy. i can't go into recovery right now. I need a jig to get back into download mode to fix it.
Click to expand...
Click to collapse
you are stuck in a boot loop right?
if you power your phone off, hold down both vol buttons and hold down the power button until the ATT screen comes up, let go, does it not go into recovery mode?
or
download mode:
power off, while holding both vol buttons, plug in usb. does that not work?
yakobo said:
My ultimate goal is to get Andromeda3 on my cappy. It seems to be a good rom. Could I just flash that using oden? (put it in the pda slot) or will that not work until I go back to stock?
With this new thread you linked me to, Just put in odin and I should be good to go? Thank you for your help by the way.
Click to expand...
Click to collapse
Get ursa minor back on your phone, then mount usb in mounts and storage, then copy the Andromeda3 zip to the drive. You were almost there.
Fish around in the usb port with 301kOhms of resistance from radio shack. You will hit pins 4 abd 5 and you will be in download mode.
Pirateghost said:
you are stuck in a boot loop right?
if you power your phone off, hold down both vol buttons and hold down the power button until the ATT screen comes up, let go, does it not go into recovery mode?
or
download mode:
power off, while holding both vol buttons, plug in usb. does that not work?
Click to expand...
Click to collapse
No:/ no button combos work to get me in recovery or download mode. Getting a jig (hopefully today) so I can fix all this. Yes it is in a boot loop
AdamOutler said:
Get ursa minor back on your phone, then mount usb in mounts and storage, then copy the Andromeda3 zip to the drive. You were almost there.
Fish around in the usb port with 301kOhms of resistance from radio shack. You will hit pins 4 abd 5 and you will be in download mode.
Click to expand...
Click to collapse
Thanks. I tried putting the Andromeda on the phone by copying it over to the phone through the mounted sd card but it was all of a sudden "write protected" and showed up as a cd instead of an sd card. :/ I know I was real close but I made some mistakes along the way
also, when you say fish around the usb port. you mean inside the phone? Is there any danger of hitting the wrong pins and possibly hurting my phone? (say i hit pins 3 and 5 by mistake or something) or is it all pretty safe? I was going to try and attempt the jig method that only used the resistors but n oticed the pins were horrible small in the phone:/
yakobo said:
Thanks. I tried putting the Andromeda on the phone by copying it over to the phone through the mounted sd card but it was all of a sudden "write protected" and showed up as a cd instead of an sd card. :/ I know I was real close but I made some mistakes along the way
also, when you say fish around the usb port. you mean inside the phone? Is there any danger of hitting the wrong pins and possibly hurting my phone? (say i hit pins 3 and 5 by mistake or something) or is it all pretty safe? I was going to try and attempt the jig method that only used the resistors but n oticed the pins were horrible small in the phone:/
Click to expand...
Click to collapse
It's not inside the phone... it's the USB port on the phone. One pin is on top and the other is on the bottom. If you don't have a JIG, that's the easy way to do it. There's no power on the USB port. This is a quick way to do it. You'll be fine. It's safe.
AdamOutler said:
It's not inside the phone... it's the USB port on the phone. One pin is on top and the other is on the bottom. If you don't have a JIG, that's the easy way to do it. There's no power on the USB port. This is a quick way to do it. You'll be fine. It's safe.
Click to expand...
Click to collapse
Sorry, that is what I meant. I meant to place where the charger is plugged in to. Just seems like the pins are really really tiny. Thank you for your help gonna get my resistors hopefully today and get my phone working again.
I have a Samsung Captivate which has been rooted and unlocked...it was running 2.3.5 uckk4
I believe I got a virus from downloading some app that was not on the market well long story short I tried to flash it back to a different version
I believe I put something in odin bootload that I wasnt suppose to it was an accident as you see I am a total noob at this then I use the 1 click unbrick now my phone keeps rebooting itself but i looked at the about phone which i get to for a few seconds before it reboots itself again and this is what it says
Firmware
2.3.3
Baseband
1879UCKF1
Kernel Version
1897UCKK414489
BUILD
gingerbreadUCKF1
I have tried a master reset since I could get it into debug just that it keeps looping and it worked in odin but not on my phone and this is what it generated
<?xml version="1.0" encoding="UTF-8" ?>
- <REFLASH>
- <UNIT>
<ESN>00000000000000 /0</ESN>
<TIMESTAMP>20120424002823</TIMESTAMP>
<RESULT>_20120424002823</RESULT>
<SOFTWARE_NAME>Downloader</SOFTWARE_NAME>
<SOFTWARE_VER>3.00</SOFTWARE_VER>
<OEM_NAME>SAMSUNG</OEM_NAME>
</UNIT>
</REFLASH>
PLEASE HELP ME....if you can get my phone operational again I WILL DONATE MONEY TO YOU!
I have tried EVERYTHING and searched FAR AND WIDE!!!! I almost forgot Odin does not display my device anymore...ie such as com4...I really have tried everything that's why I am willing to donate/ pay you if you can solve my problem....if odin recognizes my device then it gets stuck halfway through. As of today my computer recognizes my device but Odin does not!
I have read and tried everything here
http://forum.xda-developers.com/showthread.php?t=858765
and here
http://forum.xda-developers.com/showthread.php?t=731989
and alot of other things listed and not listed on this site
NEW IFO: now I'm stuck at ATT logo and can not get into download mode
This thread will selfdestruct in 5...4...3...2...1....
DANG IT wrong section? SORRY MODERATORS!!!! SORRY
Please dont delete please just move it please!!!!
oh goodness... No need for donation but all you need to do is download a stock package odin like kk4 which is the most recent. Flash in download mode. There a sticky at the top of the thread list with all the packages.
In the future post in the questions/help section.
diskjockee said:
DANG IT wrong section? SORRY MODERATORS!!!! SORRY
Click to expand...
Click to collapse
Ok I gave you the only warning in the PM. I have moved this thread. A word from the wise. Learn what you are doing before you do it. This is not something to be taken lightly. You could very easily mess something up beyond repair. Take a few hours to spend reading and researching.
ThisWasATriumph said:
oh goodness... No need for donation but all you need to do is download a stock package odin like kk4 which is the most recent. Flash in download mode. There a sticky at the top of the thread list with all the packages.
In the future post in the questions/help section.
Click to expand...
Click to collapse
I have tried that it doesnt work. thats was one of the 1st things I tried
try this
http://forum.xda-developers.com/showthread.php?t=1266172
Make sure you're using a usb port that is on the motherboard (back of computer). Before you plug in your phone to flash, set up Odin first. Put all the files you are going to flash in the right places. After Odin is fully set up, plug in the usb to the back of your computer, then to you phone. Make sure you are in download mode. If the usb still isn't working, try a different USB port that is on the back of the computer. Connecting the usb to the back of the pc is very important. Odin doesn't recognize my phone when it's plugged in the front, when the phone is in download mode. Only the back usb ports.
If Odin still doesn't recognize the phone, try a different USB cable. But do everything else the exact same way as I described.
Also make sure you fully setup Odin before you plug your phone in to the usb.
Sent from my Serendipity VII flashed Captivate using xda premium
Limitz Cash said:
Make sure you're using a usb port that is on the motherboard (back of computer). Before you plug in your phone to flash, set up Odin first. Put all the files you are going to flash in the right places. After Odin is fully set up, plug in the usb to the back of your computer, then to you phone. Make sure you are in download mode. If the usb still isn't working, try a different USB port that is on the back of the computer. Connecting the usb to the back of the pc is very important. Odin doesn't recognize my phone when it's plugged in the front, when the phone is in download mode. Only the back usb ports.
If Odin still doesn't recognize the phone, try a different USB cable. But do everything else the exact same way as I described.
Also make sure you fully setup Odin before you plug your phone in to the usb.
Sent from my Serendipity VII flashed Captivate using xda premium
Click to expand...
Click to collapse
I just tried that....it worked but now I'm stuck at the ATT logo
You probably have mismatch kernel and bootloader loader. Maybe you can try to wipe data / factory reset in recovery.
Sent from my Serendipity VII flashed Captivate using xda premium
If you continue to go into a bootloop then I recommend a USB jig for the galaxy s series. I had had that happen before, Nothing worked, couldnt get it into download mode, couldnt get into recovery, Until I got the USB jig, Fixed my problem right away, and I flashed back to stock. The USB jig is only 6 bucks on ebay. Ill link you if you are interested.
Limitz Cash said:
You probably have mismatch kernel and bootloader loader. Maybe you can try to wipe data / factory reset in recovery.
Sent from my Serendipity VII flashed Captivate using xda premium
Click to expand...
Click to collapse
I know you're trying to be helpful, but there is no such thing as a kernel/bootloader mismatch...
b-eock said:
I know you're trying to be helpful, but there is no such thing as a kernel/bootloader mismatch...
Click to expand...
Click to collapse
Are you sure? Becuz I tried to flash an overclock kernel on my rom, and kept getting a bootloop. Then after flashing a few different kernels, the kernel that came with my rom didn't even work. I had to go back to stock and reflash my rom.
Idk, maybe it was just me then. I apologize. thank you for correcting me, that's how we learn what's right, and what's wrong.
Sent from my Serendipity VII flashed Captivate using xda premium
noob advice
I'm a noob, so this comment might just serve to show how little I know, but whenever I find myself in a bootloop situation, I've noticed that the problem starts with the initial attempt of installing a rom via a kernel with an older version of CWM. During the post-install boot sequence, I'll see the AT&T splash screen, a CWM screen with script running, and then a reboot. Usually, accessing the CWM (now on a higher version) and reinstalling the rom will get it working. Not quite kernel / bootloader mismatch, but close.
whisky23 said:
I'm a noob, so this comment might just serve to show how little I know, but whenever I find myself in a bootloop situation, I've noticed that the problem starts with the initial attempt of installing a rom via a kernel with an older version of CWM. During the post-install boot sequence, I'll see the AT&T splash screen, a CWM screen with script running, and then a reboot. Usually, accessing the CWM (now on a higher version) and reinstalling the rom will get it working. Not quite kernel / bootloader mismatch, but close.
Click to expand...
Click to collapse
Ohh ok. That might have been my problem before. Thank you.
Sent from my Serendipity VII flashed Captivate using xda premium
Try this.
Buy a jig. Either off of Ebay or mobiletechvideos.com
That week get you into download mode.
Then find the HEIMDALL flasher for a build. (my favorite was the one click for saurom Kk4)
Install heimdall drivers, and flash. Boom. Functioning phone.