hi there, i got my I9305 updated to 4.3 lest week or so. I used an official firmware from sammobile. The problem is that when in booting into Download mode the phone is not seen by ODIN or by the PC. I haved look into the Device manager on Windows and the phone isnt there. I haved the machine and the phone rebooted a few times but still no luck. But, the phone when is turned on ADB and UMS work just fine. Is it because of KNOW bootloader?
OS: windows 8.1
original usb cable
Android 4.3 Germany
s3 lte
dany547 said:
hi there, i got my I9305 updated to 4.3 lest week or so. I used an official firmware from sammobile. The problem is that when in booting into Download mode the phone is not seen by ODIN or by the PC. I haved look into the Device manager on Windows and the phone isnt there. I haved the machine and the phone rebooted a few times but still no luck. But, the phone when is turned on ADB and UMS work just fine. Is it because of KNOW bootloader?
OS: windows 8.1
original usb cable
Android 4.3 Germany
Click to expand...
Click to collapse
Hello
I had once a problema like that, and the solution was change the port usb, try another... check the drivers, instal keez...
Try another port and re-install drivers, that should do it
filipe cunha said:
Hello
I had once a problema like that, and the solution was change the port usb, try another... check the drivers, instal keez...
Click to expand...
Click to collapse
i changed the ports, reinstalled the drivers, but still the phone doesnt show.
Change cable .
I had the same problem. I tried another PC and it worked well.
Yeah, for me it was a combination of trying different pc's, usb ports and cables over and over until one combination finally worked. After that, most seem to work....
Sent from my GT-I9305 using xda app-developers app
If you can't get a new pc then try to clear all drivers (if you don't know how do a windows fresh install) and try again.
Radu Florin said:
I had the same problem. I tried another PC and it worked well.
Click to expand...
Click to collapse
on 4.1.2 worked great but now its not willing to work. I tried a machine running XP, but same problem.l
fotbal5 said:
If you can't get a new pc then try to clear all drivers (if you don't know how do a windows fresh install) and try again.
Click to expand...
Click to collapse
hmm, i tryed that but still no succes. I will do that again today so see if it works. On 4.1.2 work without any problems
still no luck. Is there a way to root the phone from stock recovery? The method for android 4.1 doesnt work,
You don't have kies running or installed do you?
Chemacky said:
You don't have kies running or installed do you?
Click to expand...
Click to collapse
Kies has nothing to do with this problem
dany547 said:
Kies has nothing to do with this problem
Click to expand...
Click to collapse
You need to update the Samsung USB drivers (for 4.3). Search the forums for them.
It's called kies 3
shayind4 said:
You need to update the Samsung USB drivers (for 4.3). Search the forums for them.
Click to expand...
Click to collapse
the problem are not the drivers. The phone is not seen at all.
tried it on another rig running XP, no luck
dany547 said:
still no luck. Is there a way to root the phone from stock recovery? The method for android 4.1 doesnt work,
Click to expand...
Click to collapse
era un root toolkit pe aici pe undeva, iti face root prin adb, nu prin download mode
asta mai exact http://forum.xda-developers.com/showthread.php?t=1979290
darkmage93 said:
era un root toolkit pe aici pe undeva, iti face root prin adb, nu prin download mode
asta mai exact http://forum.xda-developers.com/showthread.php?t=1979290
Click to expand...
Click to collapse
nu suportă 4.3 și nu merge
Related
Not sure when it began but I am unable to connect my tab to any pc. I have tried 4 different ones. It just gives me the error message "usb device not recognized". I have the custom rom from overcome(the latest one) installed. I put the tab in download mode and the same issue remains. I turned on/off usb debugging and it still doesnt work. I even tried the *#7284#. That did not help either. Please help.
Hi..firstly, welcome to XDA Samsung Tablet Forum. I see you already register since Nov 10 but your post so far is only 2 post. So I'm consider you are still newbie (same like me
Anyway, back to your question.
Have you go to samsung webpage and download the kies?
http://www.samsung.com/my/support/d...WDXME&prd_mdl_name=GT-P1000&srchword=GT-P1000
Do that first, after install it, go to >>Tools>>Install driver. Click it.
make sure your tab is connected to your PC via USB.
After you click the install driver, kies will download the driver for you and it will automatically detect your USB tab.
please try.
Is your pc windows xp or 7? W7 doesnt need any drivers installed, but W xp needs drivers.
rangercaptain said:
Is your pc windows xp or 7? W7 doesnt need any drivers installed, but W xp needs drivers.
Click to expand...
Click to collapse
Is that true?? Mine is W7, but it could not detect my tab. only after install driver it can detect
naimmkassim said:
Is that true?? Mine is W7, but it could not detect my tab. only after install driver it can detect
Click to expand...
Click to collapse
Sounds like a fault with windows. Try running updates or use a registry cleaner/fixer see if that helps.
CCleaner has one.
[EDIT] Ah I misread, looks like you have tried other systems with same issue. Not sure then.
I'm assuming you're not using the same cable with all of them, otherwise you'd want to try a different cable. If you've tried the different cables between the different devices and still the same issue, you might roll one of them back to stock and see if that fixes the issue or not. It's possible you have bad usb ports, but more than likely it's a software issue on the tab.
naimmkassim said:
Hi..firstly, welcome to XDA Samsung Tablet Forum. I see you already register since Nov 10 but your post so far is only 2 post. So I'm consider you are still newbie (same like me
Anyway, back to your question.
Have you go to samsung webpage and download the kies?
Do that first, after install it, go to >>Tools>>Install driver. Click it.
make sure your tab is connected to your PC via USB.
After you click the install driver, kies will download the driver for you and it will automatically detect your USB tab.
please try.
Click to expand...
Click to collapse
Even though I tried this step before, I went though these steps again..and the same problem occurs.
rangercaptain said:
Is your pc windows xp or 7? W7 doesnt need any drivers installed, but W xp needs drivers.
Click to expand...
Click to collapse
They all are windows xp computers. It was working fine up until a few days ago. Then it just stopped working. Im trying to flash back to stock rom just incase some software went haywire but I can't bec odin doesn't recognize my tab
Have you tried a different USB port?
I had the same problem with Odin/Kies. Updated Kies to latest version and reinstalled drivers and works now
muli82 said:
Have you tried a different USB port?
I had the same problem with Odin/Kies. Updated Kies to latest version and reinstalled drivers and works now
Click to expand...
Click to collapse
How about the usb cable? Possibility is high due to cable itself. Since you using the same cable with all PC. You should try to change it.
Sent from my GT-P1000 using XDA App
Bad cable or bad tab. Borrow a cable to eliminate that.
Not sure, When i was reading instruction for how to update with overcome rom it said that if Odin doesnt recognise the tab try a different USB port.
guys i recently changed my hardware i am running on windows xp i have want to use the flash tool but when i connect my phone in flash mode the pc gets hanged up
i have been faced this problem before too but somehow managed to slove it i think its most probably driver problem any solution to solve this????????
ankitxperia said:
guys i recently changed my hardware i am running on windows xp i have want to use the flash tool but when i connect my phone in flash mode the pc gets hanged up
i have been faced this problem before too but somehow managed to slove it i think its most probably driver problem any solution to solve this????????
Click to expand...
Click to collapse
Use Flashtool 0.2.9.1 or switch to a more recent version of Windows if you want to run Flashtool 0.6.x.x
B.Jay said:
Use Flashtool 0.2.9.1 or switch to a more recent version of Windows if you want to run Flashtool 0.6.x.x
Click to expand...
Click to collapse
thanks for the reply cause i think the problem causing is due to driver
previously in my old machine i used gordon driver at that time every thing worked fine
lol, wtf do you mean, changed driver? you got rid of the driver?
meh, never mind.
ankitxperia said:
thanks for the reply and what about drivers should i install drivers which came from flashtool ot the gordon driver
cause i think the problem causing is due to driver previously in my old machine i used gordon driver at that time every thing worked fine
Click to expand...
Click to collapse
Your call. Either install PCC to have the SEMC drivers installed or use the Gordon's Gate setup that comes with Flashtool.
B.Jay said:
Your call. Either install PCC to have the SEMC drivers installed or use the Gordon's Gate setup that comes with Flashtool.
Click to expand...
Click to collapse
still no luck using flash tooll version 0.53 installed gordon drivers from the flash tool folder rebooted the pc i m running on xp professional sp2
when i put my phone in flash mode i get "semc new hardware found" then the pc gets completely hanged so i need to directly turnoff the pc so any solutions ???
Thanks in advance
ankitxperia said:
still no luck using flash tooll version 0.53
Click to expand...
Click to collapse
Use Flashtool 0.2.9.1
Newer versions won't work with your crap of an severly outdated OS.
ankitxperia said:
still no luck using flash tooll version 0.53 installed gordon drivers from the flash tool folder rebooted the pc.
Thanks in advance
Click to expand...
Click to collapse
No!, Not flashtool 0.53, flashtool 2.9.1
Where the hell did you get 0.53 from anyway?
ankitxperia said:
i m running on xp professional sp2
when i put my phone in flash mode i get "semc new hardware found" then the pc gets completely hanged so i need to directly turnoff the pc so any solutions ???
Click to expand...
Click to collapse
1st: Your computer OS is a bit old, outdated........That is one of the reason's why it crashes
I suggest you get a new OS or update your OS
I.E
LinuxMint (what i use, but im still unable to use flashtool at all LOL)
OR
Move to a newer version of windows I.E: Windows vista or Windows 7
Hope it helps
-wilbso
wilbso said:
Where the hell did you get 0.53 from anyway?
Click to expand...
Click to collapse
Most likely out of my "Flashtool" folder on MediaFire as I keep a collection of different versions there.
B.Jay said:
Most likely out of my "Flashtool" folder on MediaFire as I keep a collection of different versions there.
Click to expand...
Click to collapse
it makes sense now
wilbso said:
No!, Not flashtool 0.53, flashtool 2.9.1
Where the hell did you get 0.53 from anyway?
Click to expand...
Click to collapse
i got this version from here not from hell
http://androxyde.github.com/Flashtool/
i will check and report soon thanks
Hello guys,
I am trying to get DarkysROM on my Galaxy S. However, I am not able to root (CF-root) my phone with neither ODIN or SuperOneClick. I have tried different tutorials and on top of that with different cable, pc, factory reset and even another phone! Obivously is ODIN not reading my phone in the download mode, but instead when it is turn on properly.
Please guys help me out, I am very desperate, as the ROM sounds promising.
I am running it on 2.3.3 GGB.
CHeers.
mattibrr said:
Hello guys,
I am trying to get DarkysROM on my Galaxy S. However, I am not able to root (CF-root) my phone with neither ODIN or SuperOneClick. I have tried different tutorials and on top of that with different cable, pc, factory reset and even another phone! Obivously is ODIN not reading my phone in the download mode, but instead when it is turn on properly.
Please guys help me out, I am very desperate, as the ROM sounds promising.
I am running it on 2.3.3 GGB.
CHeers.
Click to expand...
Click to collapse
Do you have samsung kies installed on your pc? If not you may need samsung drivers
medovici said:
Do you have samsung kies installed on your pc? If not you may need samsung drivers
Click to expand...
Click to collapse
I have installed all the requirements which are needed, as well as the USB drivers.
In fact, it is not working. Are there alternatives to root?
Same problem here, KIES not recognizing galaxy s phone, tried several computers.
mattibrr said:
I have installed all the requirements which are needed, as well as the USB drivers.
In fact, it is not working. Are there alternatives to root?
Click to expand...
Click to collapse
to root it try this app http://forum.xda-developers.com/showthread.php?t=2130276
I'm having a problem with Flasshtool latest version i installed it and won't run. My laptop OS is windows 8. It just won't run after i installed it and open it. Just loading a bit and then nothings happen. I also tried the previous version of it and have the same problem.
try the version 0.9.22.3
gelotalion said:
I'm having a problem with Flasshtool latest version i installed it and won't run. My laptop OS is windows 8. It just won't run after i installed it and open it. Just loading a bit and then nothings happen. I also tried the previous version of it and have the same problem.
Click to expand...
Click to collapse
try the version 0.9.22.3
soujirock said:
try the version 0.9.22.3
Click to expand...
Click to collapse
Thanks i will try that. Hope it will work
I tried it but still no good. I also tried the old version but nothing happens too.
gelotalion said:
I tried it but still no good. I also tried the old version but nothing happens too.
Click to expand...
Click to collapse
look I had a similar problem, what I did was reinstall the drivers according to the phone model drivers install companion xperia download the latest version of flashtool and I worked
soujirock said:
look I had a similar problem, what I did was reinstall the drivers according to the phone model drivers install companion xperia download the latest version of flashtool and I worked
Click to expand...
Click to collapse
Thanks for your reply I'll try this now
soujirock said:
look I had a similar problem, what I did was reinstall the drivers according to the phone model drivers install companion xperia download the latest version of flashtool and I worked
Click to expand...
Click to collapse
I did what you said and still won't work
i successfully launched flashtool the problem is in mozilla firefox plugin i guess. The only problem is my flashtool said No Device registered even if i installed all the drivers correctly. When I'm trying to sync in github it's just stuck on it nothing happens.
17/036/2016 10:36:56 - ERROR - No device is registered in Flashtool.
17/036/2016 10:36:56 - ERROR - You can only flash devices.
gelotalion said:
i successfully launched flashtool the problem is in mozilla firefox plugin i guess. The only problem is my flashtool said No Device registered even if i installed all the drivers correctly. When I'm trying to sync in github it's just stuck on it nothing happens.
17/036/2016 10:36:56 - ERROR - No device is registered in Flashtool.
17/036/2016 10:36:56 - ERROR - You can only flash devices.
Click to expand...
Click to collapse
look I have windows 7 and I had problems with earlier versions of flashtool, what I recommend is that you make a test on another pc since apparently it is problem of your USB ports, or failing that should see if the USB port your phone works properly.
soujirock said:
look I have windows 7 and I had problems with earlier versions of flashtool, what I recommend is that you make a test on another pc since apparently it is problem of your USB ports, or failing that should see if the USB port your phone works properly.
Click to expand...
Click to collapse
I made it thanks for the help. I also root my z1. I just have one question if i update it to lollipop is the root access will gone or it will not?
[SOLVED]
Try updating your USB drivers. Might help or try connecting to another pc
Sent from my Le X526 using Tapatalk
DayWalker said:
Try updating your USB drivers. Might help or try connecting to another pc
Sent from my Le X526 using Tapatalk
Click to expand...
Click to collapse
Please Read the 3rd line of my post. I have said already "I have also tried formatting my le 2 and my pc but still the same"
And also as i know about these things being a developer myself and having rooted and developed some things for some few phones before, i have also tried uninstalling the drivers completely also tried installing other drivers which i find compatible. But still the Same Problem....
Can you please do 1 thing, can you use a tool named DrvBk and backup your le 2 related drivers? And then give it to me so i can try installing that...
It will be very helpful of you.
Thanks in advance.
Rishabh Rao said:
Please Read the 3rd line of my post. I have said already "I have also tried formatting my le 2 and my pc but still the same"
And also as i know about these things being a developer myself and having rooted and developed some things for some few phones before, i have also tried uninstalling the drivers completely also tried installing other drivers which i find compatible. But still the Same Problem....
Can you please do 1 thing, can you use a tool named DrvBk and backup your le 2 related drivers? And then give it to me so i can try installing that...
It will be very helpful of you.
Thanks in advance.
Click to expand...
Click to collapse
Well i thought you only formatted le2 anyway yeah i supposed i could. Ill See to it
Sent from my Le X526 using Tapatalk
I dont think its the driver problem. The might be the USB code running on the phone is failing. I was unable to find driver(INF file with VID and PID) for LEECO Le 2(You can find PID/VID using USBVIEW). Suggest to use AIRDROID or SHAREIT that is if your WIFI is working Or USB OTG(I thing you have thought this).
DayWalker said:
Well i thought you only formatted le2 anyway yeah i supposed i could. Ill See to it
Click to expand...
Click to collapse
Thanks
caldran said:
I dont think its the driver problem. The might be the USB code running on the phone is failing. I was unable to find driver(INF file with VID and PID) for LEECO Le 2(You can find PID/VID using USBVIEW). Suggest to use AIRDROID or SHAREIT that is if your WIFI is working Or USB OTG(I thing you have thought this).
Click to expand...
Click to collapse
Yes but im just confused about 1 thing i even did factory reset and even full wipe and flash on my le2 and also usb works well in fastboot mode. So i can't figure out what's the problem.....
And also i would have got the driver INF file
But the phone is just giving no driver to my pc
And pc says device descriptor request failed. So means pc can't even identify phone. so how can i get the pid or vid cause i dont even have any drivers....
And share it or airdroid wont work for me as my pc doesn't have a wifi card
So rerouting file thru my modem would be very slow for transferring file of more than 10 gb size. So it would take hours maybe for that
So only solution i have now if usb not solved is to buy a new usb otg cable as my old one got ripped. So if i dont get any solution within a few days, then thats my only option :crying:
Rishabh Rao said:
Thanks
Click to expand...
Click to collapse
Here's the link of my Driver Backup. Hope it would help.
https://drive.google.com/open?id=0B_U5K4aTA3J3cWQ1Y2tTajc3Nms
First check your pc usb port is work perfectly
sandip121 said:
First check your pc usb port is work perfectly
Click to expand...
Click to collapse
Please Read the Post properly and then comment..
I have said already
IF according to u my pc usb port is not well, then how could i connect it in fastboot and how could it work there?
And also i have even tried it in different ports but still the same.
What happened with the drivers? Were you able to get your phone back to work?
Sent from my Le X526 using Tapatalk
DayWalker said:
What happened with the drivers? Were you able to get your phone back to work?
Sent from my Le X526 using Tapatalk
Click to expand...
Click to collapse
No actually not
My usb is still the same
But @caldran gave me the idea of using airdroid
And thats working well
I dont get speeds of usb with it
But atleast
Something is better than nothing right...
So i gotta live with it....
Anyway thanks for ur help
Hey bro, try pda.net
BhaiDon said:
Hey bro, try pda.net
Click to expand...
Click to collapse
Bro if you dont know the solution, then please dont give foolish answers....
Read the full post again before answering please......:silly:
And if phone will disconnect as soon as connected even in AT mode then how could PdaNet Work, BTW FYI i tried it already.... By my AIO Toolkit.
Bro, My Le2 was also not connecting to PC..same problem as you
But Then I tried pda.net both on my pc & phone..and whooooop....my phone connected to pc
And by the way, I am new to XDA, but not foolish....
I run my own mobile repair centre at Ahmedabad:good:
BhaiDon said:
Bro, My Le2 was also not connecting to PC..same problem as you
But Then I tried pda.net both on my pc & phone..and whooooop....my phone connected to pc
And by the way, I am new to XDA, but not foolish....
I run my own mobile repair centre at Ahmedabad:good:
Click to expand...
Click to collapse
Bro im sorry if i hurt u by any means, i didn't mean it.
I just wanted to say that PdaNet doesnt work for me
And actually i thing ur problem was with drivers.
But now i realize mine isnt
My problem is maybe in the usb port/hardware of my le2
It connects well in fastboot mode
But now when i connect in android or recovery mode it says not recognized
Anyways thanks for trying to help me
Sent from my Le 2 using XDA Labs
Rishabh Rao said:
Bro im sorry if i hurt u by any means, i didn't mean it.
I just wanted to say that PdaNet doesnt work for me
And actually i thing ur problem was with drivers.
But now i realize mine isnt
My problem is maybe in the usb port/hardware of my le2
It connects well in fastboot mode
But now when i connect in android or recovery mode it says not recognized
Anyways thanks for trying to help me
Click to expand...
Click to collapse
Its alright bro
I don't know if this'll work for you
i had the same problems all i did was Right click and updated driver then
click on browse driver
then click on let me pick
Then select MTP USB driver and then click next
It worked for me and it may be too standard but try it might work
lesterjoel123 said:
I don't know if this'll work for you
i had the same problems all i did was Right click and updated driver then
click on browse driver
then click on let me pick
Then select MTP USB driver and then click next
It worked for me and it may be too standard but try it might work
Click to expand...
Click to collapse
No bro it doesn't work.
Tried a 100 times already