This is the cracked bootloader + CWM5.0.2.8(+alpha) for the official V30C ICS firmware of the SU660
Original document found at http://cafe.naver.com/op2x/93882 in Korean
See also http://cafe.naver.com/androidhacker/323 (in Korean)
Known Issues
Formatting system or data partition using the mke2fs in the CWM will break the bootloader and MBR. Im not sure which part is related with this bug
-> The type of data/system partitions are changed from "ext4/ext3" to "auto" to workaround this issue
fixed by arcee!! (MMC_ERASE kernel fix)
Installation procedure
Download
• extract attached zip.
Backup
You have to backup your phone before flashing the bootloader / CWM5 using backup.bat.
Currently, this backup script do backup LNX/SOS/bootloader/bct table and no simple restore method supported.
• Prepare APX mode (you have to install APX driver first)
• Turn off your phone
• disconnect USB
• pull out battery
• hold volume up/down and connect USB while 10~15 seconds
=> "NVidia USB Boot-Recovery" devices appear in the device manager
• execute backup.bat (or sh script/backup.sh in Linux)
• android bot will appear on your phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install Bootloader + CWM5
after backup is completed, disconnect USB and prepare APX mode again
(Please retry previous procedure to enter the APX mode)
• execute win_flash.bat (or sh flash.sh in Linux)
• follow the instruction in the cmd prompt.
• you have to input "1" to install the CWM5 and <ENTER>
Boot logo
after installation the LG Boot logo will be changed like as following.
Screenshot
ChangeLogs
•2012/11/21 - CWM5.0.2.8e(by me) included with MMC_ERASE fix(by arcee)
•2012/09/07 - CWM restore problem workarounded
- singing tool added based on the cbootimage source of the chromeOS.
http://git.chromium.org/gitweb/?p=chromiumos/third_party/cbootimage.git
- no more needed! --odmdata 0xc8000 do the magic job introduced by [email protected]!!
•2012/09/05 - rewrite install/backup scripts
- S/W download spash changed
•2012/09/04 - bootloader cracked by me
FAQ
reserved
ChangeLogs etc.
reserved
Is there going to be a CWM Touch?
Sent from my LG-P999 using xda premium
Thankss :good: :good: :good: :good: :good:
FatalityBoyZahy said:
Is there going to be a CWM Touch?
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
1. CWM 6.x touch recovery is not stable enough. it crashed on some other devices that i have.
2. the touch part of CWM 6.x is NOT open source. we can't fix it we can't modify it.
My device LG SU660 crashed...
it wont install anyother boot loader...also wont install any CWM
basically i get to the lkast screenshot attached and after that... i installed NOVA10HD...it installs ok...but the phone doesnt boot after the intalltion..
nor i can get the "smart flasher tool" to recognise my device (for stock Flashing of the rom)
every NV Flash works...but the phone wont boot with anyother except this one..
nothing's helping after tryin "wkpark"
the phone wont power up..thanks alot
wkpark said:
1. CWM 6.x touch recovery is not stable enough. it crashed on some other devices that i have.
2. the touch part of CWM 6.x is NOT open source. we can't fix it we can't modify it.
Click to expand...
Click to collapse
Awwww, well that's unfortunate.
And how did you manage to change the LG Boot Logo? I've been wanting to replace it with the Nexus One logo for a while now.
danishalirana said:
nothing's helping after tryin "wkpark"
the phone wont power up..thanks alot
Click to expand...
Click to collapse
Huh??? Am I understanding correctly that you are blaming your problem on wkpark? The rule #1 of modding anything (any device, any platform, anytime) is to assume all possible risks and not to take anything for granted. Not to mention having a reasonably clear contingency plan. Remember that you are trusting not only a developer giving you something to play with, but also your own abilities to do it right, or to back out of a possible trouble.
But with just a little bit of reading you could have a good chance of bringing your phone back to life. It's all been done before, and, as many people are saying, O2x is virtually unbrickable, short of a physical damage... Hint: follow the steps described here. For the first step you will need this (it's also on XDA, but I am too lazy to search), or this, or maybe this. After that, restore your last-known-good backup (if you have one), or flash any working SU660 ROM fresh.
FatalityBoyZahy said:
Awwww, well that's unfortunate.
And how did you manage to change the LG Boot Logo? I've been wanting to replace it with the Nexus One logo for a while now.
Click to expand...
Click to collapse
There are some examples and script in the tarball but not documented.
You have to prepare a logo image smaller than the original LG logo..
I'll post howto change the logo of the bootloader in the near future.
Sent from my LG-KU5400 using xda app-developers app
wkpark said:
There are some examples and script in the tarball but not documented.
You have to prepare a logo image smaller than the original LG logo..
I'll post howto change the logo of the bootloader in the near future.
Sent from my LG-KU5400 using xda app-developers app
Click to expand...
Click to collapse
Awesome! Thank you
thnks maan Kt-Froggy
i appologise...its my own fault definately...but nothing went wrong and the post saying "CRASHED ON SOME DEVICES" was a little late for me
other wise i never wouldve tried it
Sorry ma maan WKPARK
anger u know... my bad...
---------- Post added at 10:43 PM ---------- Previous post was at 10:34 PM ----------
well guys... when i use SMARTFLASH TOOL i get this
Originally Posted by danishalirana View Post
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec SI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec SI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:26.9 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.6 Sec :Set Infineon CFI Information 2
00:27.6 Sec SI Download start
00:28.0 Sec :Set FLASH address
00:29.3 Sec SI Download success
00:29.3 Sec :SLB Download start
00:29.6 Sec :Set FLASH address
00:33.1 Sec :SLB Download success
00:33.2 Sec :Aeneas Download start
00:34.0 Sec :Erase was executed rightly!
00:34.3 Sec :Set FLASH address
00:40.5 Sec :Aeneas Download success
00:40.5 Sec :Code Download start
00:41.0 Sec :Erase was executed rightly!
00:41.4 Sec :Set FLASH address
02:55.2 Sec :Code Download success
02:55.2 Sec :Num of partitions are 7
03:05.2 Sec :Timeout error is occured
03:05.2 Sec :error!
and when i try to flash any other CWM (excepet for the first one in the post i.e. CWM5.0.2.8d) i get this
===============================================================
===============================================================
One Click ClockWorkMod Recovery Flash for T-Mobile G2x
External SD Support by Koushik Dutta
Version 5.0.2.0
===============================================================
===============================================================
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 3
chip sku: 0xf
chip uid: 0x033c11c94180a117
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: fastboot.bin
/ 1024992/1024992 bytes sent
fastboot.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
failed executing command 14 NvError 0x120000
command failure: partition download failed
===============================================================
===============================================================
*****Once nvflash has completed successfully then hit any key to close.*****
****If any step failed then repeat the process****
Press any key to continue . . .
So guys...any help about this one...
i tried KDZ flash too...it hangs up...
only thing left untried is LGFLASH TOOL... any guidlines on it???
well i guess you guys can cook something up for me..hm??
danishalirana said:
thnks maan Kt-Froggy
i appologise...its my own fault definately...but nothing went wrong and the post saying "CRASHED ON SOME DEVICES" was a little late for me
other wise i never wouldve tried it
Sorry ma maan WKPARK
anger u know... my bad...
---------- Post added at 10:43 PM ---------- Previous post was at 10:34 PM ----------
well guys... when i use SMARTFLASH TOOL i get this
Originally Posted by danishalirana View Post
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec SI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec SI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:26.9 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.6 Sec :Set Infineon CFI Information 2
00:27.6 Sec SI Download start
00:28.0 Sec :Set FLASH address
00:29.3 Sec SI Download success
00:29.3 Sec :SLB Download start
00:29.6 Sec :Set FLASH address
00:33.1 Sec :SLB Download success
00:33.2 Sec :Aeneas Download start
00:34.0 Sec :Erase was executed rightly!
00:34.3 Sec :Set FLASH address
00:40.5 Sec :Aeneas Download success
00:40.5 Sec :Code Download start
00:41.0 Sec :Erase was executed rightly!
00:41.4 Sec :Set FLASH address
02:55.2 Sec :Code Download success
02:55.2 Sec :Num of partitions are 7
03:05.2 Sec :Timeout error is occured
03:05.2 Sec :error!
and when i try to flash any other CWM (excepet for the first one in the post i.e. CWM5.0.2.8d) i get this
===============================================================
===============================================================
One Click ClockWorkMod Recovery Flash for T-Mobile G2x
External SD Support by Koushik Dutta
Version 5.0.2.0
===============================================================
===============================================================
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 3
chip sku: 0xf
chip uid: 0x033c11c94180a117
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: fastboot.bin
/ 1024992/1024992 bytes sent
fastboot.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
failed executing command 14 NvError 0x120000
command failure: partition download failed
===============================================================
===============================================================
*****Once nvflash has completed successfully then hit any key to close.*****
****If any step failed then repeat the process****
Press any key to continue . . .
So guys...any help about this one...
i tried KDZ flash too...it hangs up...
only thing left untried is LGFLASH TOOL... any guidlines on it???
well i guess you guys can cook something up for me..hm??
Click to expand...
Click to collapse
Try a different usb port ?
tried ports and everything...still stuck at the splash screen logo..
may b some other CWM would wok...anyways working on it...will update soon
in the mean time im open to suggestions
danishalirana said:
tried ports and everything...still stuck at the splash screen logo..
may b some other CWM would wok...anyways working on it...will update soon
in the mean time im open to suggestions
Click to expand...
Click to collapse
nvflash froyo rom. flash with nvflash. this should work
ongkal said:
nvflash froyo rom. flash with nvflash. this should work
Click to expand...
Click to collapse
Where do i find this nvflash froyo rom
any ways..i dont know where i am messing up.i tried NVFLASH from RESTY's EXCELLENT NVFLASH. i think its CWM 5.0.2.0
and now the phone keeps looping on the LG Logo
danishalirana said:
.i dont know where i am messing up.i tried NVFLASH from RESTY's EXCELLENT NVFLASH. i think its CWM 5.0.2.0
and now the phone keeps looping on the LG Logo
Click to expand...
Click to collapse
I am not sure where you are "messing up", but the sequence is supposed to be rather simple. Just make sure you follow the steps. Sorry, I don't have an SU660, just trying to explain what I read about the issue, because is kinda makes sense to me... As for "Where do i find this nvflash froyo rom", I gave you the link to Paul's package -- this is exactly it.
1. As described here (quoted text below), use nvflash with a stock P990 ROM. This is to make sure the boot and recovery partitions are in order (it's all explained there).
2. Now, with the P990 ROM, you phone won't boot -- this is expected. Therefore, after the first step you need to either restore from your SU660 backup (if you have one), or flash an SU660 ROM from scratch.
ongkal said:
the SU660's partition number for CWM is the same partition number for the master boot partition of P990 so when you flash an SU660 CWM while using a P990/P993 rom, both CWM boots are flashed into the main boot partition and the recovery boot partition. Its hard to explain but the fix for this problem is detailed by xsat in post #44 above.
Flash a stock P990 NV Flash rom to reconfigure the boot partitions of the phone(your phone wont boot without any mods using a P990/P993 rom), turn off the phone. Go to CWM recovery (hold home button and volume down button for a few seconds then hold power button). Mount USB storage through CWM, copy a CWM backup to a folder in: /clockworkmod/backup/ then unmount, go to restore, then restore your backup. voila!
Click to expand...
Click to collapse
danishalirana said:
Where do i find this nvflash froyo rom
any ways..i dont know where i am messing up.i tried NVFLASH from RESTY's EXCELLENT NVFLASH. i think its CWM 5.0.2.0
and now the phone keeps looping on the LG Logo
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1867292
hey. sorry man. i thought i pasted the right link. someone made an su660 nvflash rom so you need not use a p990 nvflash rom anymore. i posted that fix before someone created this su660 nvflash rom. theoretically, this should fix your phone. try it and test. if it works, then clicking thanks will be appreciated.
kt-Froggy said:
I am not sure where you are "messing up", but the sequence is supposed to be rather simple. Just make sure you follow the steps. Sorry, I don't have an SU660, just trying to explain what I read about the issue, because is kinda makes sense to me... As for "Where do i find this nvflash froyo rom", I gave you the link to Paul's package -- this is exactly it.
1. As described here (quoted text below), use nvflash with a stock P990 ROM. This is to make sure the boot and recovery partitions are in order (it's all explained there).
2. Now, with the P990 ROM, you phone won't boot -- this is expected. Therefore, after the first step you need to either restore from your SU660 backup (if you have one), or flash an SU660 ROM from scratch.
Click to expand...
Click to collapse
Downloading...
i think im messing up at the PARTITIONS, have any idea how i restore partiotions??
Hi,
I have the new bootloader and I'm trying to flash the baseband. I have done this before on the old bootloader and it worked just fine. However, on the new bootloader, when the 's/w upgrade' message appears, and SmartFlash is running, at around the time when it says writing RAM, the screen goes off and then at about 50% smartflash times out. Could you help me diagnose what could be the problem so I can smart flash a baseband? Thanks.
Same has happened to me a bunch of times.
This is how I fix it:
There is a box for CP bin and a box below for AP bin. Try to revert the two. So, if you put the CP file in CP bin box before, now try to put CP file in AP bin box and AP file in CP bin box. This always fix it for me
Didn't seem to work mate. Here is the log:
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec SI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec SI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:27.2 Sec :Timeout error is occured
00:27.2 Sec :error!
What I'm about to say might sound ridicolous, but it helps too.
Unplug your phone and reboot your PC. Then try again.
Lol it does help sometimes, just try
I actually fixed it. Turns out, I was removing the battery while trying to smartflash.
happend with me last time .. there is ni way try it again n again and again .. it will start .. but yeah everytim start with 1st step of flashing baseband .. hit thanks if i helped
Sent from my LG-P990 using xda app-developers app
Hi guys,
Hope you can help me, well this is the issue with my OB:
First i tried to upgraded to ICS (un-rooted) with the SFT and succeded, then i downgraded it to GB to take it to my mobile company because i had some hardware issues, anyway the point is that my Optimus Black suddenly stop reading the SIM card and the IMEI and MAC address are displayed as UNKNOWN on the phone info.
Then i tried to reflash it to Gingerbread, Froyo and ICS but the process cannot be completed due and error with the SFT, then i tried to use the LG support tool to restore it but an error is displayed and cannot restore my phone.
Pretty much the same thing happens with the SFT this is the error that displays:
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.1 Sec SI RAM writing start
00:02.1 Sec :Trying to communicate with IFX modem
00:07.1 Sec :Confirm IFX communication
00:07.1 Sec SI RAM writing end
00:07.1 Sec :Start PSI RAM
00:07.1 Sec :EBL writing start
00:27.1 Sec :Timeout error is occured
00:27.1 Sec :Start EBL error!
I hope someone can help me,
Best Regards!!
Writing flash from file : LG-P970_LGP970AT-00-V30b-EUR-XXX-NOV-29-2012_BOS_CZ_DA_GER_EN_ES_EE_FR_MAC_CRO_ICL_IT_LV_LT_HU_NL_NO_PL_PT_RO_SLO_SK_FIN_SW_TR_GR_BUL_RU_SERB_KOR_CN.crc
Extracting flash files, please wait ... OK
Connect powered OFF phone to P999 USB cable
(with 910k resistor) ... OK
Opening USB Port (COM37) ... OK
----------------------------------------------------------
Writing CP flash ...
Getting CP params ... OK
Loading PBL, please wait ... OK
Loading SBL, please wait ...
No ACK after SBL uploading
Operation failed
tried in smart flash tool also-error as
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.1 Sec SI RAM writing start
00:02.1 Sec :Trying to communicate with IFX modem
00:07.1 Sec :Confirm IFX communication
00:07.1 Sec SI RAM writing end
00:07.1 Sec :Start PSI RAM
00:07.1 Sec :EBL writing start
00:27.1 Sec :Timeout error is occured
00:27.1 Sec :Start EBL error!
at 50% error as above.why?
I got the same error recently because of twrp. I've finally managed to revive my device after dozens of attemps. Erase entire CP, then try with V30D
Ilko said:
I got the same error recently because of twrp. I've finally managed to revive my device after dozens of attemps. Erase entire CP, then try with V30D
Click to expand...
Click to collapse
how erase entire cp?
in smart flash tool this option not active
help me
you must run windows enabler and switch it to on first. then click on the gray parts to enable them
Sent from my LG-P970 using xda app-developers app
can u help me for version 30d file for smart flasher?
i have tried in vygis 30d flash file-but error
help me
http://lg-phone-firmware.com/index.php?id_mod=1
Hello!
I'm writed other question, OTG not working: https://forum.xda-developers.com/t/usb-otg-not-working.4297787/
After downgrade HUAWEI P20 PRO CLT-L09 C432 with official HiSuite (with proxy to old 8.1 firmware), flashing end = error. After power off, only blank screen. No recovery, no eRecovery, no power on.
After pressed power, the CPU started heating and still hand warm. USB not powered (no 5V out). (After attached USB cable, PC detected in fastboot mode (with/without accu) "Android Sooner Single ADB Interface". Test pins shorted (below flasher led), no reaction.
Bootloader locked, Multi-Tool or Miracle Box flasher/unbricker "stock service flash" downloaded to phone and failed (download to phone ok, CRC ok, no write permission).
Waiting for Phone...
Phone Found..
Read Info Skipped..
Writing Data : Please Wait
Writing Data : Please Wait
Max Write Size : 471859200 bytes
Uploading : crc
Size : 88 KB
Verifying.. ok
Writing : crc
FAILED (remote: Command not allowed)
Done..
Writing Data : Please Wait
Writing Data : Please Wait
Max Write Size : 471859200 bytes
Uploading : verlist
Size : 0 KB
Verifying.. ok
Writing : verlist
FAILED (remote: Command not allowed)
Done..
Writing Data : Please Wait
Hisuite not support this phone recovery. No other method to unbrick, only SD-update.
The phone not powered OTG = SD-update not working!
Test with powered USB hub?
Cable tested other type phone, good. Cable tested other working P20 Pro (not available menu to "reverse charge" = phone not supported OTG).
How to reflash firmware?
Thanks!
Ps.: Chat the Huawei service: No home recover method. 5-10 day in a service time and if mainboard change too big money. (Now changed LCD and need new battery + service fee... --> phone go to trash.) ...or other home servicing???