Hi,
I have the new bootloader and I'm trying to flash the baseband. I have done this before on the old bootloader and it worked just fine. However, on the new bootloader, when the 's/w upgrade' message appears, and SmartFlash is running, at around the time when it says writing RAM, the screen goes off and then at about 50% smartflash times out. Could you help me diagnose what could be the problem so I can smart flash a baseband? Thanks.
Same has happened to me a bunch of times.
This is how I fix it:
There is a box for CP bin and a box below for AP bin. Try to revert the two. So, if you put the CP file in CP bin box before, now try to put CP file in AP bin box and AP file in CP bin box. This always fix it for me
Didn't seem to work mate. Here is the log:
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec SI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec SI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:27.2 Sec :Timeout error is occured
00:27.2 Sec :error!
What I'm about to say might sound ridicolous, but it helps too.
Unplug your phone and reboot your PC. Then try again.
Lol it does help sometimes, just try
I actually fixed it. Turns out, I was removing the battery while trying to smartflash.
happend with me last time .. there is ni way try it again n again and again .. it will start .. but yeah everytim start with 1st step of flashing baseband .. hit thanks if i helped
Sent from my LG-P990 using xda app-developers app
Related
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec SI RAM writing start
00:12.0 Sec :Timeout error is occured
00:12.0 Sec :error!
please help me, my lg optimus 2x can't detect battery status and also signal..inside setting the baseband is unknown..
Try to restore your previous RIL (if you remember which was), it worked for me.
Otherwise, i think it's better if you reflash a stock rom through NVflash (e.g. http://forum.xda-developers.com/showthread.php?t=1007825).
tthatswhy said:
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec SI RAM writing start
00:12.0 Sec :Timeout error is occured
00:12.0 Sec :error!
please help me, my lg optimus 2x can't detect battery status and also signal..inside setting the baseband is unknown..
Click to expand...
Click to collapse
Try to upgrade again. It failed for me the first time too.
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.1 Sec SI RAM writing start
00:02.6 Sec :Trying to communicate with IFX modem
00:07.8 Sec :Confirm IFX communication
00:07.8 Sec SI RAM writing end
00:07.8 Sec :Start PSI RAM
00:07.8 Sec :EBL writing start
00:27.3 Sec :Start EBL
00:27.4 Sec :Set capabilities to be used
00:27.6 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.6 Sec :Set flash ID complete
00:28.2 Sec :Set Infineon CFI Information 1
00:28.3 Sec :Set Infineon CFI Information 2
00:28.3 Sec SI Download start
00:28.6 Sec :Set FLASH address
00:30.0 Sec SI Download success
00:30.0 Sec :SLB Download start
00:30.3 Sec :Set FLASH address
00:52.4 Sec :Timeout error is occured
00:52.4 Sec :error!
00:52.4 Sec :SLB Download fail
please help me
Which baseband are you trying to flash? If you are trying to flash the v20m one, there are 4 file in the zip. Flash the files from the largest to the smallest in size. http://forum.xda-developers.com/showthread.php?t=1401921
Sent from my Optimus 2X using xda premium
finnaly i solve this problem by changing another usb port..
That's great news. Happy ROM flashing.
Sent from my Optimus 2X using xda premium
Bb install normally always fail, you just have to try try again
Sent from my Optimus 2X using Tapatalk
HI,
To start with, I am French. So, I don't speak English fluently.
My LG Optimus 2x seems bricked. It was rooted. Yesterday, I tried to update my phone from Android 2.3.4 to Android 4.0.4(both official) with Smartflash. But an error occured :
00:00.0 Sec : Download Start...
00:02.0 Sec :RomBinary Download start
00:04.1 Sec SI RAM writing start
00:04.1 Sec :Trying to communicate with IFX modem
00:09.3 Sec :Confirm IFX communication
00:09.3 Sec SI RAM writing end
00:09.3 Sec :Start PSI RAM
00:09.3 Sec :EBL writing start
00:28.8 Sec :Start EBL
00:28.9 Sec :Set capabilities to be used
00:29.1 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:29.1 Sec :Set flash ID complete
00:29.7 Sec :Set Infineon CFI Information 1
00:29.8 Sec :Set Infineon CFI Information 2
00:29.8 Sec SI Download start
00:30.1 Sec :Set FLASH address
00:31.5 Sec SI Download success
00:31.5 Sec :SLB Download start
00:31.8 Sec :Set FLASH address
00:35.4 Sec :SLB Download success
00:35.4 Sec :Aeneas Download start
00:36.0 Sec :Erase was executed rightly!
00:36.2 Sec :Set FLASH address
00:42.5 Sec :Aeneas Download success
00:42.5 Sec :Code Download start
00:42.8 Sec :Erase was executed rightly!
00:43.0 Sec :Set FLASH address
02:58.6 Sec :Code Download success
02:58.7 Sec :N05:51.7 Sec artition download complete.
um of partitions are 7
03:07.8 Sec artition download complete.
03:07.9 Sec artition download complete.
03:08.4 Sec artition download complete.
03:11.0 Sec artition download complete.
03:17.8 Sec artition download complete.
06:49.5 Sec :Timeout error is occured
06:49.5 Sec :error!
Click to expand...
Click to collapse
Since this moment, when I turn on my phone, it stucks at LG logo and I can't access to CWM.
I tried to fix this problem with NvFLash, but when I run the file "flash.bat", the error is :
waiting for bootloader initialize
bootloader failed NvError 0x0
command failure : bootloader download failed.
Click to expand...
Click to collapse
How can I fix this problem ?
Thank you in advance.
Try again with Smartflash. I will link you to a post I made with a few different methods to try to bypass the timeout error-
http://forum.xda-developers.com/showthread.php?p=38840748
Hopefully that will help
Sent from my LG-P990 using Tapatalk 2
Keep flashing the AP .bin file until it is flashed successfully. Change usb ports, restart íyour computer, try on other computer. It will work after many tries
Sent from my LG-P990 using xda app-developers app
Thank you very much !
It was the .bin file that generated the error. I tried several times and now it works. It's a strange way.
Hi guys,
Hope you can help me, well this is the issue with my OB:
First i tried to upgraded to ICS (un-rooted) with the SFT and succeded, then i downgraded it to GB to take it to my mobile company because i had some hardware issues, anyway the point is that my Optimus Black suddenly stop reading the SIM card and the IMEI and MAC address are displayed as UNKNOWN on the phone info.
Then i tried to reflash it to Gingerbread, Froyo and ICS but the process cannot be completed due and error with the SFT, then i tried to use the LG support tool to restore it but an error is displayed and cannot restore my phone.
Pretty much the same thing happens with the SFT this is the error that displays:
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.1 Sec SI RAM writing start
00:02.1 Sec :Trying to communicate with IFX modem
00:07.1 Sec :Confirm IFX communication
00:07.1 Sec SI RAM writing end
00:07.1 Sec :Start PSI RAM
00:07.1 Sec :EBL writing start
00:27.1 Sec :Timeout error is occured
00:27.1 Sec :Start EBL error!
I hope someone can help me,
Best Regards!!
Hi everyone!
My brother gave me a Lg Optimus Black P970 because he says it does not work....and it's true!!
I am trying to hard reset the phone, ease all data, SD, internal memory...everything! but it seems to be impossible!
I have benn reading all day and I tried every tool possible: SmartFlashTool, KDZ, etc... but we the phone restarts, its in the same state as before!
Could u please give me some help!! I would thank you very much!
Thanks!! (sorry about my english )
Pabloku
What version of firmware? Tried hidden menu reset? Does it goes to software update mode? Rooted? Got cwm? Adb and media transfer working or dead usb?
Sent from my LG-P970 using xda premium
viges666 said:
What version of firmware? Tried hidden menu reset? Does it goes to software update mode? Rooted? Got cwm? Adb and media transfer working or dead usb?
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
Hi viges666,
Firmware is 2.3.4 (V20H)
I tried hidden menu (3845#*970#) and I got same result.
Not rooted. Not cwm.
Usb is alive. Adb and media transfer works.
I think it is a really strange issue... It is like if the memory restores every time I restart the phone. For example, I can uninstall a lot of apps, change shorcuts on the screen, etc,but when I restart the phone, everything is as before....
I appreciate so much your help. Any idea??
Root, install cwm (the working one) and try to factory reset via cwm. Or try to resmartflash with another version. What about software update mode? Smartflash procedure all ok? At least, flashing an ics?
In fact, wipping does erase the index of data, not data itself, that shall be the problem. Maybe a file system bug...
Sent from my LG-P970 using xda premium
viges666 said:
Root, install cwm (the working one) and try to factory reset via cwm. Or try to resmartflash with another version. What about software update mode? Smartflash procedure all ok? At least, flashing an ics?
In fact, wipping does erase the index of data, not data itself, that shall be the problem. Maybe a file system bug...
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
I can't root, I can't install cwm... nothing work When I try flashing, the phone restarts and it stucks in LG logo. I have waited more than 8 hours, and LG logo continue on screen. Then, I remove battery and put it on again, so the phone restarts normally but everything is like it was.
Maybe a file system bug...do u think could it be solved?
Pabloku said:
I can't root, I can't install cwm... nothing work When I try flashing, the phone restarts and it stucks in LG logo. I have waited more than 8 hours, and LG logo continue on screen. Then, I remove battery and put it on again, so the phone restarts normally but everything is like it was.
Maybe a file system bug...do u think could it be solved?
Click to expand...
Click to collapse
Download a **** rom and put it in sd card.
Install v20 stock ROOTED rom using smartflash and wipe everything when the phone goes to CWM. Install new rom and reboot.
Enviado desde mi LG-P970 usando Tapatalk 2
ferhpsquad said:
Install v20 stock ROOTED rom using smartflash and wipe everything when the phone goes to CWM. Then reboot.
Enviado desde mi LG-P970 usando Tapatalk 2
Click to expand...
Click to collapse
Ok. I'll try it. Any link to download v20 stock rooted? I'll search it, anyway.
Thanks. I'll tell you in a minutes if it helps me
ferhpsquad said:
Download a **** rom and put it in sd card.
Install v20 stock ROOTED rom using smartflash and wipe everything when the phone goes to CWM. Install new rom and reboot.
Enviado desde mi LG-P970 usando Tapatalk 2
Click to expand...
Click to collapse
Problem persists
I flashed a v20S stock Rooted with CW but when smartflash finish, the phone restarts and stucks in LG logo
This is the smartflash Log (maybe it helps):
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.2 Sec SI RAM writing start
00:02.2 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec SI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:23.4 Sec :Start EBL
00:23.4 Sec :Set capabilities to be used
00:24.5 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:24.5 Sec :Set flash ID complete
00:24.5 Sec :Set Infineon CFI Information 1
00:24.5 Sec :Set Infineon CFI Information 2
00:24.5 Sec SI Download start
00:24.6 Sec :Set FLASH address
00:24.8 Sec SI Download success
00:24.8 Sec :SLB Download start
00:24.9 Sec :Set FLASH address
00:26.5 Sec :SLB Download success
00:26.5 Sec :Aeneas Download start
00:27.2 Sec :Erase was executed rightly!
00:27.4 Sec :Set FLASH address
00:30.6 Sec :Aeneas Download success
00:30.6 Sec :Code Download start
00:31.0 Sec :Erase was executed rightly!
00:31.2 Sec :Set FLASH address
01:52.9 Sec :Code Download success
01:52.9 Sec :EMMC writing start
01:52.9 Sec :Success to erase
01:52.9 Sec artition size is 128 KBytes
01:53.0 Sec :Success to erase
01:53.0 Sec artition size is 128 KBytes
01:53.1 Sec :Success to erase
01:53.1 Sec artition size is 384 KBytes
01:53.2 Sec :Success to erase
01:53.2 Sec artition size is 4992 KBytes
01:54.1 Sec :Success to erase
01:54.1 Sec artition size is 5248 KBytes
01:55.1 Sec artition size is 0 KBytes
01:55.1 Sec :Success to erase
01:55.1 Sec artition size is 2048 KBytes
01:55.5 Sec artition size is 0 KBytes
01:55.5 Sec :Success to erase
01:55.5 Sec artition size is 419072 KBytes
03:09.5 Sec artition size is 0 KBytes
03:09.5 Sec artition size is 0 KBytes
03:09.6 Sec artition size is 0 KBytes
03:09.6 Sec :Success to erase
03:09.6 Sec artition size is 128 KBytes
03:09.6 Sec artition size is 0 KBytes
03:09.6 Sec :RomBinary Download success
03:09.6 Sec :Target is resetting
03:09.6 Sec ownload complete
Now, If I disconnect phone from USB and I switch it on, it is as it was before...nothing changed...
Try the kdz workaround maybe, or try to restore it with the lg tool.
Sent from my LG-P760 using xda app-developers app
N00BY0815 said:
Try the kdz workaround maybe, or try to restore it with the lg tool.
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
I tried both, but nothing works
Pabloku said:
I tried both, but nothing works
Click to expand...
Click to collapse
Hi again! Im trying to repare this Lg P790 again buy Im having the same problem. It is like if it has a read-only mode on and I don't know how to resolve it.
Any new help please????
Thanks in advance!
Writing flash from file : LG-P970_LGP970AT-00-V30b-EUR-XXX-NOV-29-2012_BOS_CZ_DA_GER_EN_ES_EE_FR_MAC_CRO_ICL_IT_LV_LT_HU_NL_NO_PL_PT_RO_SLO_SK_FIN_SW_TR_GR_BUL_RU_SERB_KOR_CN.crc
Extracting flash files, please wait ... OK
Connect powered OFF phone to P999 USB cable
(with 910k resistor) ... OK
Opening USB Port (COM37) ... OK
----------------------------------------------------------
Writing CP flash ...
Getting CP params ... OK
Loading PBL, please wait ... OK
Loading SBL, please wait ...
No ACK after SBL uploading
Operation failed
tried in smart flash tool also-error as
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.1 Sec SI RAM writing start
00:02.1 Sec :Trying to communicate with IFX modem
00:07.1 Sec :Confirm IFX communication
00:07.1 Sec SI RAM writing end
00:07.1 Sec :Start PSI RAM
00:07.1 Sec :EBL writing start
00:27.1 Sec :Timeout error is occured
00:27.1 Sec :Start EBL error!
at 50% error as above.why?
I got the same error recently because of twrp. I've finally managed to revive my device after dozens of attemps. Erase entire CP, then try with V30D
Ilko said:
I got the same error recently because of twrp. I've finally managed to revive my device after dozens of attemps. Erase entire CP, then try with V30D
Click to expand...
Click to collapse
how erase entire cp?
in smart flash tool this option not active
help me
you must run windows enabler and switch it to on first. then click on the gray parts to enable them
Sent from my LG-P970 using xda app-developers app
can u help me for version 30d file for smart flasher?
i have tried in vygis 30d flash file-but error
help me
http://lg-phone-firmware.com/index.php?id_mod=1