[Q] Moto X dont want to turn on =( - Moto X Q&A

Hello, Sorry for my English =)​
Think i got bricked Moto X. It want's power up, button combo don't help, also i cant load into bootloader. (it was try to update by OTA, when android robo processed an upgrade, phone suddenly turned off)
Plugged into USB on Win8, Win7 nothing happend, but in Win XP provide USB connected sound and moto X shows green light in speaker, then i saw in device manager some HUB device connected (Human Interface Devices) like it have correct driver, and no device with yellow exclamation or "QHSUSB_DLOAD" (like at this post .)
After few (maybe 30) seconds connection lost and provide disconnected sound. Green light on Moto X disappears.
Then if i press vol up+vol down+power combo, and plugging again into USB have the same picture.
Now i tried one more try with win8 and saw that reaction to USB it was connected like "HID-compliant vendor-defined device" but get disconnected after few seconds.
Some one have idea?
Than i have update info:
Now when i plugged to wall-charger phone shows green LED light for 5 sec, than disappearing for few minutes and then light again.... OMG it seems like it is alive, but cant log to bootloader =(
And one's more update info:
I was try car charger that have more than 2.5 A, when i plugged phone, green light saw over the time when it was plugged. But 10 minutes didn't get it from deep sleep... =(

maybe this will help
http://forum.xda-developers.com/showthread.php?t=2629057
.....read everything before flashing.....obiously you update to 4.4 or 4.4.2 and then downdrade.....every post that say downgrade, says that if you take a ota you will hardbrick your phone

Mathaa said:
Hello, Sorry for my English =)​
Think i got bricked Moto X. It want's power up, button combo don't help, also i cant load into bootloader. (it was try to update by OTA, when android robo processed an upgrade, phone suddenly turned off)
Plugged into USB on Win8, Win7 nothing happend, but in Win XP provide USB connected sound and moto X shows green light in speaker, then i saw in device manager some HUB device connected (Human Interface Devices) like it have correct driver, and no device with yellow exclamation or "QHSUSB_DLOAD" (like at this post .)
After few (maybe 30) seconds connection lost and provide disconnected sound. Green light on Moto X disappears.
Then if i press vol up+vol down+power combo, and plugging again into USB have the same picture.
Now i tried one more try with win8 and saw that reaction to USB it was connected like "HID-compliant vendor-defined device" but get disconnected after few seconds.
Some one have idea?
Than i have update info:
Now when i plugged to wall-charger phone shows green LED light for 5 sec, than disappearing for few minutes and then light again.... OMG it seems like it is alive, but cant log to bootloader =(
And one's more update info:
I was try car charger that have more than 2.5 A, when i plugged phone, green light saw over the time when it was plugged. But 10 minutes didn't get it from deep sleep... =(
Click to expand...
Click to collapse
What did you do prior to flashing the ota? Did you flash any firmware? Which one?
Sent on my Lenoto A2109 tablet

flashallthetime said:
What did you do prior to flashing the ota? Did you flash any firmware? Which one?
Sent on my Lenoto A2109 tablet
Click to expand...
Click to collapse
it was running on 4.4.2 software, then i downgrade to 4.2.2. all was fine, but OTA killed it.
So after that, i read that 4.4.2 instaled new bootloader =( that cant be downgraded, and can bricked the phone, it was my mistake =(
So i think i should sent it to Motorola and if i lucky one, they should repair it, or resend new one. or if bad luck i will throw it to the trash =)

Mathaa said:
it was running on 4.4.2 software, then i downgrade to 4.2.2. all was fine, but OTA killed it.
So after that, i read that 4.4.2 instaled new bootloader =( that cant be downgraded, and can bricked the phone, it was my mistake =(
So i think i should sent it to Motorola and if i lucky one, they should repair it, or resend new one. or if bad luck i will throw it to the trash =)
Click to expand...
Click to collapse
You must follow the tutorial and try run the 4.4.2 firmware again.
Do not lose hope.

feelknOck said:
You must follow the tutorial and try run the 4.4.2 firmware again.
Do not lose hope.
Click to expand...
Click to collapse
tried all methods, phone don't wakes up. But still shows green light when i plug too powerful charger (more than 2,5 A)

Mathaa said:
Hello, Sorry for my English =)​
Think i got bricked Moto X. It want's power up, button combo don't help, also i cant load into bootloader. (it was try to update by OTA, when android robo processed an upgrade, phone suddenly turned off)
Plugged into USB on Win8, Win7 nothing happend, but in Win XP provide USB connected sound and moto X shows green light in speaker, then i saw in device manager some HUB device connected (Human Interface Devices) like it have correct driver, and no device with yellow exclamation or "QHSUSB_DLOAD" (like at this post .)
After few (maybe 30) seconds connection lost and provide disconnected sound. Green light on Moto X disappears.
Then if i press vol up+vol down+power combo, and plugging again into USB have the same picture.
Now i tried one more try with win8 and saw that reaction to USB it was connected like "HID-compliant vendor-defined device" but get disconnected after few seconds.
Some one have idea?
Than i have update info:
Now when i plugged to wall-charger phone shows green LED light for 5 sec, than disappearing for few minutes and then light again.... OMG it seems like it is alive, but cant log to bootloader =(
And one's more update info:
I was try car charger that have more than 2.5 A, when i plugged phone, green light saw over the time when it was plugged. But 10 minutes didn't get it from deep sleep... =(
Click to expand...
Click to collapse
Even i have the same problem please help
i really dont want to lose this phone
:crying:

Sanjith2908 said:
Even i have the same problem please help
i really dont want to lose this phone
:crying:
Click to expand...
Click to collapse
Can't help you, after when i try all methods described on XDA phone didn't woke up.
Then, I got warranty replacement.

Mathaa said:
Can't help you, after when i try all methods described on XDA phone didn't woke up.
Then, I got warranty replacement.
Click to expand...
Click to collapse
how did u get the replacement?
i have warranty too

Sanjith2908 said:
how did u get the replacement?
i have warranty too
Click to expand...
Click to collapse
Click here, after go to chat with Moto and they will provide all information. But didn't tell them about bricking.
Tell something like: my phone doesn't turn on, i don't know what happend. Provide them IMEI or ESN....

Mathaa said:
Click here, after go to chat with Moto and they will provide all information. But didn't tell them about bricking.
Tell something like: my phone doesn't turn on, i don't know what happend. Provide them IMEI or ESN....
Click to expand...
Click to collapse
thank u
im gonna try and get a replacement

Related

[Q] HTC ONE no power or led

Hi, I posted a question on this already but the situation has changed. So firstly what happened was i rooted, flashed cwm recovery and was running the sinless rom GPE. this was fine for about a month and then i decided to s-off...the s-off process went smoothly and the phone powered back on like normal. Then i flashed another rom and there was a cyan colour filling the screen at boot so I decided to restore from a previous backup. However this backup was done before the s-off process. After restoring successfully I clicked "reboot phone" on CWM and since that the phone never turned on or show any signs of life.
At first it would connect to the computer but show up in device manager as QHSUSB_DLOAD but now when I connect the phone to the computer it jus disconnects and reconnects over and over.
Things I tried:
Holding power button for over 2 minutes (with and without bright light on the sensor).
Left charging for over 4 days.
Holding Power+VOL down for over 2 minutes.
Holding Power+VOL up for over 2 minutes.
Holding all three hardware buttons for over 2 minutes.
In the process of trying all these things not once did the led even blink or did the phone even show any signs of life. Can anyone help with this situation?
devon4786 said:
Hi, I posted a question on this already but the situation has changed. So firstly what happened was i rooted, flashed cwm recovery and was running the sinless rom GPE. this was fine for about a month and then i decided to s-off...the s-off process went smoothly and the phone powered back on like normal. Then i flashed another rom and there was a cyan colour filling the screen at boot so I decided to restore from a previous backup. However this backup was done before the s-off process. After restoring successfully I clicked "reboot phone" on CWM and since that the phone never turned on or show any signs of life.
At first it would connect to the computer but show up in device manager as QHSUSB_DLOAD but now when I connect the phone to the computer it jus disconnects and reconnects over and over.
Things I tried:
Holding power button for over 2 minutes (with and without bright light on the sensor).
Left charging for over 4 days.
Holding Power+VOL down for over 2 minutes.
Holding Power+VOL up for over 2 minutes.
Holding all three hardware buttons for over 2 minutes.
In the process of trying all these things not once did the led even blink or did the phone even show any signs of life. Can anyone help with this situation?
Click to expand...
Click to collapse
Hi mate, as i know, the QHSUSB_DLOAD mode, is the same to say: bricked phone...
So, probably, you have to send it to htc for warranty and they have to change your motherboard...
Guich said:
Hi mate, as i know, the QHSUSB_DLOAD mode, is the same to say: bricked phone...
So, probably, you have to send it to htc for warranty and they have to change your motherboard...
Click to expand...
Click to collapse
I was hoping that wasn't the case..but oh well...would they be able to know if I was s-off or anything?
devon4786 said:
I was hoping that wasn't the case..but oh well...would they be able to know if I was s-off or anything?
Click to expand...
Click to collapse
Theoretically no, because the mainboard won't work...
I think is the possibility that your phone is bricked is hard
HTC One, Froze, Restart, Cannot turn on, NO LED etc.
Guich said:
Theoretically no, because the mainboard won't work...
I think is the possibility that your phone is bricked is hard
Click to expand...
Click to collapse
I also had the case of my HTC One, my battery was still at 55% while I was watching a video until it froze, so I decided to shut it down to reboot but when I tried to switch it on, it already does not show the Red LED, did any possible combinations of power on and pressing down the volume also under bright light, but there's no luck on it. However, I tried plugging my phone to the PC and there are still the sounds that it has connected. I checked it on the devmgmt.msc but it says that:
Base System Device, QHSUSB_DLOAD and Unidentified Device - All appeared to say "No Driver Found"
It has been a day since I left my phone wall charged, plugged it in the PC with the USB detected sounds but still can't turn it on. Is there any other way to turn on the phone again? Since I badly wanted to recover all my photos and other stuff from the phone Any possible help/tip/advice would be much appreciated! Would there be any way before sending it to the HTC Company? Thank you in advance!
There is a possible fix for that around here somewhere, a Guide to fix hard bricks, typical I cant find it now.
EDIT: Here it is, only supports M7_UL devices though, never had to use it so I cant answer any further queries on it, if you have any problems trying it you'll have to post in that thread.
http://forum.xda-developers.com/showthread.php?t=2770684

HTC One Not Charging :(

I don't know what to do now, I'm feeling depressed just by thinking about my problem. Okay, so just to give ya the backstory (nothing big), my phone's battery died when going home to the gym (automatically shut down), didn't think much about it. I got home, after awhile, I plugged in my HTC One into the charger and it wouldn't charge at all!!! :crying: Never happened to me before, I'm running on the latest TWRP, and on the Google Edition rom. Now on to what I did next.
I tried just leaving it on there for a few hours, NOT A PEEP, no LED light, nada just completely dead. Then I plugged it into the laptop USB port, it doesn't recognizes the device but it did install a driver too (forgot what it was called though). And the computer does indeed recognizes the device's existence cuz I hear the computer make that sound when you hook it up to the computer. Also in the the Devices and Printers on Windows 7, it either says Unknown Device or USB Input Device depending on what USB port I hook it up to. And after a few hours charging from the PC, the LED light did come back but only the low battery is dead pulsing (dunno what else to call it lol, its not the solid LED light). And it only does it for a few minutes, goes away then repeats. So does that mean there is some glimmer of hope? I've tried holding the Power button for a minute or 2, nothing. Power button + Vol Up? Nope. Power button + Vol Down? Nope. Do all of those while the LED light is pulsing? Nope. When its completely black? Nope.
So what can I do?! I can't claim warranty because I bought this off Craigslist (plus I'm rooted, so that would be moot anyways), can someone help this depressed as heck man? Its like I'm watching my best friend die slowly. :crying: lol. Sorry if it was a long read, just wanted to put everything in OP, would appreciate the help!
NumairRana said:
I don't know what to do now, I'm feeling depressed just by thinking about my problem. Okay, so just to give ya the backstory (nothing big), my phone's battery died when going home to the gym (automatically shut down), didn't think much about it. I got home, after awhile, I plugged in my HTC One into the charger and it wouldn't charge at all!!! :crying: Never happened to me before, I'm running on the latest TWRP, and on the Google Edition rom. Now on to what I did next.
I tried just leaving it on there for a few hours, NOT A PEEP, no LED light, nada just completely dead. Then I plugged it into the laptop USB port, it doesn't recognizes the device but it did install a driver too (forgot what it was called though). And the computer does indeed recognizes the device's existence cuz I hear the computer make that sound when you hook it up to the computer. Also in the the Devices and Printers on Windows 7, it either says Unknown Device or USB Input Device depending on what USB port I hook it up to. And after a few hours charging from the PC, the LED light did come back but only the low battery is dead pulsing (dunno what else to call it lol, its not the solid LED light). And it only does it for a few minutes, goes away then repeats. So does that mean there is some glimmer of hope? I've tried holding the Power button for a minute or 2, nothing. Power button + Vol Up? Nope. Power button + Vol Down? Nope. Do all of those while the LED light is pulsing? Nope. When its completely black? Nope.
So what can I do?! I can't claim warranty because I bought this off Craigslist (plus I'm rooted, so that would be moot anyways), can someone help this depressed as heck man? Its like I'm watching my best friend die slowly. :crying: lol. Sorry if it was a long read, just wanted to put everything in OP, would appreciate the help!
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=2301007
moha_moha20106 said:
try this http://forum.xda-developers.com/showthread.php?t=2301007
Click to expand...
Click to collapse
Thank you for responding. Yeah, I tried those 2 steps, so far no good. I'm just very confused because when I charge the One by my PC, the LED orange light just blinks for awhile then goes away, then the cycle continues, does that mean the battery isn't 100% completely dead? god I'm so confused and sad at the same time lol.
This seems to be happening with TWRP 2.7.x. If you can possibly flash a different recovery you may resurrect your phone...
Sent from my HTC One using xda app-developers app
NxNW said:
This seems to be happening with TWRP 2.7.x. If you can possibly flash a different recovery you may resurrect your phone...
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
How can I flash anything when the phone wont wake up? ugh, the only hope I'm getting is that the LED is blinking from time to time, meaning there's at least something going on.
Anyone else?
Anyone? I guess theres nothing else to do huh?
*If* twrp 2.7.0.0 caused your issue (which is hard to say since we don't know which recovery you are using) then somehow you have to overwrite the recovery in fastboot.
The phone needs to be able to boot into HBOOT and then go into fastboot. the battery will have to have enough charge for the recovery flash to succeed.
i honestly don't know the next step for your case, maybe someone else can help.
Sent from my HTC One using xda app-developers app

[Q] Xperia Z1 C6903 won't turn up, just red light blinking

Hello, sorry if this question had been posted before. I just confusing with my Xperia Z1. It's just blank screen, no Sony logo, no boot animation, etc.
I've tried to hold power+vol up but nothing happen. When i put the charge on and i press the power+vol up, it vibrate three times and nothing happen.
What should i do with this?? I hope it's not hardware failure.
Thx for the answer and suggestion.
did you flash anything prior to it going like that?
Sent from my C6903 using Tapatalk
7supreme said:
Hello, sorry if this question had been posted before. I just confusing with my Xperia Z1. It's just blank screen, no Sony logo, no boot animation, etc.
I've tried to hold power+vol up but nothing happen. When i put the charge on and i press the power+vol up, it vibrate three times and nothing happen.
What should i do with this?? I hope it's not hardware failure.
Thx for the answer and suggestion.
Click to expand...
Click to collapse
When you hear the three times vibration then you shutting down your phone and after that the phone is turned off completely, then leave it under wall charger via USB or Dock for minimum 4 hours, if it do not turn on then you have to flash a new Firmware OR Repair via PC Companion. Download Official Sony PC Companion and repair your phone. Other way is to use Flashtool and download the latest FTF from Mega Collection and flash it. Then it should turn on.
hi
i have the same problem with my z1 xperia
the pc companion wont see my phone to preform any kind of repair
any ideas
thanks
if nothing is happening just the LED red blinks even when you put the device in the charge, its hard bricked and will be fixed just with opening the phone and relive it with test point ...
maybe this thread will help you:
http://forum.xda-developers.com/showthread.php?t=2646405
7supreme said:
Hello, sorry if this question had been posted before. I just confusing with my Xperia Z1. It's just blank screen, no Sony logo, no boot animation, etc.
I've tried to hold power+vol up but nothing happen. When i put the charge on and i press the power+vol up, it vibrate three times and nothing happen.
What should i do with this?? I hope it's not hardware failure.
Thx for the answer and suggestion.
Click to expand...
Click to collapse
If it's brick, no prob, let's begin
Requirements:
The latest Flash Tools version, the latest FTF file of your phone, or any FTF file you want
Plug your phone to AC charger for about one or two minutes, and if you see red LED, now your phone is OK
1) If your phone has more than 50 percent charges, you can unplug it
2) If it has less 50 percent, let it charge for about an hour or more till it reaches 70 percent
So, no matter the first way or second, after you unplug it, now you can now connect your phone via USB and flash it
If you do everything correctly and if nothing goes wrong, after flashing, you can use your phone without any problem
If you couldn't do it, inform me to help you more
Look at the micro sd slot. Is there a red stripe? Or white?
If red, it's a water damage
Sent from my C6903 using XDA Free mobile app
I had also a blinking light.. it was a broken accu.
l92 said:
Look at the micro sd slot. Is there a red stripe? Or white?
If red, it's a water damage
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
It happened exactly the same with mine. I was on stock rom, and went to the swimming pool with it. But the stripe is white.
I cannot turn it on and only get the red light blinking when is plugged into the charger...
Help...
Miguel Pereira said:
It happened exactly the same with mine. I was on stock rom, and went to the swimming pool with it. But the stripe is white.
I cannot turn it on and only get the red light blinking when is plugged into the charger...
Help...
Click to expand...
Click to collapse
Try the hard brick fix (if you have warranty send to Sony instead). I doubt it'll do anything because it seems by your decription the hardware is damaged physically, but its worth a shot.
kentexcitebot said:
Try the hard brick fix (if you have warranty send to Sony instead). I doubt it'll do anything because it seems by your decription the hardware is damaged physically, but its worth a shot.
Click to expand...
Click to collapse
I already sent it to the warranty. Now we play the waiting game...
zony xperia z1 bricked
I have the same problem !! PLS HELP !! THE PHONE IS DEAD !! My pc don`t recognize the phone !! no led... the phone not charging! what to do?? help please my z1 bricked today while updating Monster'$ Rom my Phone is entirely lifeless ... no LED light, NOTHING
When connect to PC... nothing at all happens, doesn't even pick up the phone!
Have tried VOL + and power
VOL - + power
VOL - and power
Still NOTHING... phone is DEAD
Please help me friends
Please Help any Dev!!
Please i need help, i hard bricked my z1 c6903 ,restoring a backup with unlocked bootloader , this time the pone is totally dead. When in plugg in it blinks a red light.Im reading all about this and im a bit confused ,can anyone help me please?I really appreciate if u can.Best regards
SANTUMIL said:
Please i need help, i hard bricked my z1 c6903 ,restoring a backup with unlocked bootloader , this time the pone is totally dead. When in plugg in it blinks a red light.Im reading all about this and im a bit confused ,can anyone help me please?I really appreciate if u can.Best regards
Click to expand...
Click to collapse
srichinu said:
I have the same problem !! PLS HELP !! THE PHONE IS DEAD !! My pc don`t recognize the phone !! no led... the phone not charging! what to do?? help please my z1 bricked today while updating Monster'$ Rom my Phone is entirely lifeless ... no LED light, NOTHING
When connect to PC... nothing at all happens, doesn't even pick up the phone!
Have tried VOL + and power
VOL - + power
VOL - and power
Still NOTHING... phone is DEAD
Please help me friends
Click to expand...
Click to collapse
7supreme said:
Hello, sorry if this question had been posted before. I just confusing with my Xperia Z1. It's just blank screen, no Sony logo, no boot animation, etc.
I've tried to hold power+vol up but nothing happen. When i put the charge on and i press the power+vol up, it vibrate three times and nothing happen.
What should i do with this?? I hope it's not hardware failure.
Thx for the answer and suggestion.
Click to expand...
Click to collapse
ali_assaf said:
hi
i have the same problem with my z1 xperia
the pc companion wont see my phone to preform any kind of repair
any ideas
thanks
Click to expand...
Click to collapse
NiM72NiK said:
if nothing is happening just the LED red blinks even when you put the device in the charge, its hard bricked and will be fixed just with opening the phone and relive it with test point ...
maybe this thread will help you:
http://forum.xda-developers.com/showthread.php?t=2646405
Click to expand...
Click to collapse
Drain your battery completely
By Pressing and holding volume up and power button for 15 second, no vibration dont worry just hold it for 15 seconds and forget your phone for 1-2 days
Get working charger and usb cable check it then connect charger to phone there should be red light
Leave your phone for 3-4 hours
Now disconnect your phone from charger
Again check usb cable and drivers in pc
Open flashtool and get stock ftf ready for flashing
Once the dialog box appears with phone's animation
press and hold just volume down button and connect your phone with pc and immediately Release volume down button as soon as dialogue box disappears
Then disconnect phone when instructed in flashtool and wait for 4-5 minutes
Now try to turn on the phone.
Main thing is to have patience
This should work as i have my phone in same hardbricked state twice and this brought life in my phone back..!
This fixed mine
https://www.youtube.com/watch?v=GelRGJrL08s
sony z1 red light blinking problem
i have sony z1 with red light blinking problem while charging or powering on i tried flashtool with ftf and pc companion my pc not recognice it please help me
I've had exactly the same problem, nothing but the blinking red light. I replaced the battery (around $6 on aliexpress) and the phone worked again!
Berenpak02 said:
I've had exactly the same problem, nothing but the blinking red light. I replaced the battery (around $6 on aliexpress) and the phone worked again!
Click to expand...
Click to collapse
I hope, your solution works for me too. I ordered a battery and waiting for delivering it. If it won't work, I'll write here to help someone like us who wants to order a new battery.
Edit:
After battery changing, the phone worked. I don't know why, but it had been locked and rebooted repeatedly. Then I resetted to the factory settings. After that, it has been started to run well.

Xperia SP is Dead

HELP! My Xperia SP is dead after unlocking bootloader with official way!
It won't turn on even when I tried to boot it up by connecting via usb to laptop.
I tried to charge it, but it's useless
I also tried to force restart it from restart button but it doesn't wake up
HELPP! :crying:
#UPDATE: By some miracle, the phone boots itself up and get working again. All apps are gone (like factory reset). It shut down about 2 hours then suddenly it came back to life. Still don't get it why this can be happening though. But thank God!
reynaldi3 said:
HELP! My Xperia SP is dead after unlocking bootloader with official way!
It won't turn on even when I tried to boot it up by connecting via usb to laptop.
I tried to charge it, but it's useless
I also tried to force restart it from restart button but it doesn't wake up
HELPP! :crying:
Click to expand...
Click to collapse
Have you tried the OFF button on the back?
You should try to connect your phone to pc, press volume button and keep it pressed. Then without releasing the volume button, press the restart button on the back until you see the led (blue or green depending on the volume you pressed). This means you have at the same time : usb + volume + reset button on the back.
You should keep it pressed during 3 to 15 seconds. If this doesn't work, put your phone to charge (on wall charger and preferably with stock charger) during 1-2 hours and try again.
Try reflash a stock ftf
Please provide more information to the things you did. Did you use EMMA or FLASHTOOL?
TLDGames said:
Have you tried the OFF button on the back?
Click to expand...
Click to collapse
Yes, I tried but it still doesn't work, the phone heats up while there is no sign of life. But after 2 hours it turns back on! Weird
pec0ra said:
You should try to connect your phone to pc, press volume button and keep it pressed. Then without releasing the volume button, press the restart button on the back until you see the led (blue or green depending on the volume you pressed). This means you have at the same time : usb + volume + reset button on the back.
You should keep it pressed during 3 to 15 seconds. If this doesn't work, put your phone to charge (on wall charger and preferably with stock charger) during 1-2 hours and try again.
Click to expand...
Click to collapse
I did that multiple times but there was no sign of life. No led pulse, dead screen, but only warm phone. But it came back on after 2 hours
lucasgta95 said:
Try reflash a stock ftf
Click to expand...
Click to collapse
I can't since it won't connect to anything (wall charger, usb, etc). But thank God it has come to life !
Furrydaus said:
Please provide more information to the things you did. Did you use EMMA or FLASHTOOL?
Click to expand...
Click to collapse
I use cmd since flashtool won't recognize my phone even I have install the correct driver. I read all the instructions from Sony web about unlocking bootloader and I suffer this situation. But after 2 hours it turns back on...
reynaldi3 said:
I use cmd since flashtool won't recognize my phone even I have install the correct driver. I read all the instructions from Sony web about unlocking bootloader and I suffer this situation. But after 2 hours it turns back on...
Click to expand...
Click to collapse
You should have followed the unofficiall methods and not sony
reynaldi3 said:
I did that multiple times but there was no sign of life. No led pulse, dead screen, but only warm phone. But it came back on after 2 hours
Click to expand...
Click to collapse
I have the same problem now and you made my hopes up. I was on PAC rom, normally working, but when i picked up my phone, it wasn't responding, OFF button isn't doing anything and my PC even doesn't recognize the phone over USB. So i hope it will be working again later. :fingers-crossed:
Edit: 12 hours later and still no signs of life, so im' doiwnloading ftf and i'm going to try flashing it...
Make sure you have the driver installed for your phone.
1. Download, install and run the driver update utility. Here's the link where you can download it.
http://www.driverscape.com/download/xperia-sp
2. If it doesn't detect your phone, download flashtool from here:
http://www.flashtool.net/downloads.php
Make sure you have the latest ftf image in order to flash to your phone. You can download from here.
http://forum.xda-developers.com/showthread.php?t=2311964
3. Make sure your phone is off by force shut down (clicking the OFF hard key in the back)
4. Open flashtool. Press and hold the volume down key and then connect your phone to the computer by USB.
5. The notification bar will light green indicating that it is connected in flash mode.
You can then follow instructions on how to flash through Google search. If you are able to reach step 5 and don't know how to flash, let me know.
daubh said:
Make sure you have the driver installed for your phone.
1. Download, install and run the driver update utility. Here's the link where you can download it.
http://www.driverscape.com/download/xperia-sp
2. If it doesn't detect your phone, download flashtool from here:
http://www.flashtool.net/downloads.php
Make sure you have the latest ftf image in order to flash to your phone. You can download from here.
http://forum.xda-developers.com/showthread.php?t=2311964
3. Make sure your phone is off by force shut down (clicking the OFF hard key in the back)
4. Open flashtool. Press and hold the volume down key and then connect your phone to the computer by USB.
5. The notification bar will light green indicating that it is connected in flash mode.
You can then follow instructions on how to flash through Google search. If you are able to reach step 5 and don't know how to flash, let me know.
Click to expand...
Click to collapse
Thanks, i know how to flash ftf, but my phone shows no signs of life, when plugged to charger, the LED doesn't light up and i can't go to flash mode aswell. So now it seems that the only thing i can do is to take my phone to repair, as it seems there is some hardware problem...
Dead Xperia SP Also
I have same situation since 21st of December.. I left my Phone on. When I was going to bed. I woke Up and saw this fuzzy blank grey screen, then I pressed the reset button at the back of the phone thinking all will be fine, But since then I've been battling with it. First, No sign of life after plugging, then a day later after I left it connected to my PC, The LED LIGHT turned red, but dead screen. About 15MINS later it goes off, Then comes up again (LED LIGHT) I've tried connecting to PC, it recognises it for about 4seconds and it disconnects automatically, I've tried practically all the method I saw on here.. Rubber band trick,leaving it to charge all night connected to wall charger / PC..All proved abortive, I have been trying to get the MAGIC green LED LIGHT (FLASHMODE) but it never works.. I took it to a repair shop (NOT SONY) He said he only deals with HARDWARE that it wasn't hardware problem, and they then went ahead to flash it.. (I'm out of warranty) STILL NO LUCK.. I'll be glad if anyone can guide me through or come up with a Plausible SOLUTION, 'cause my BREAK has been horrible since my PHONE went M.I.A..... Thank you GUYS
So, finally I'm going to pick up my repaired SP :fingers-crossed:. They thought it was a problem caused by the reset button pushed too hard, but since they've informed me they've changed whole motherboard, the problem must have been somwhere else, maybe they'll tell me where.
(And it seems that despite the fact i've unlocked the bootloader and flashed ROM on it, they will accept it as a warranty repair, because i think they weren't able to get to know that )
My XSP must really hate me. After less than a week since i've picked it up from the repair, it's dead again (everything tried - reset button, leaving it to charge, usb) with no signs of life ... I guess there must be a much bigger problem than just motherboard That means another two weeks with my old slow LG OO. I'm gonna die without it, i've maintained almost a month without it back then, but i had a tablet borrowed for a review. Now it's worse...
Maybe they should give me another XSP instead of trying to repair this one again...
have you considered about the battery?
the battery might be dead for all we know
That may be the problem, but i must also keep in mind that it had its motherboard changed a week ago. Anyway, i took it to the service again, they also said that charger may be causing it, but battery seems more logical to me as there were no problems with charging.
So i have to wait another two long weeks and then i'll know what was it...

M7 bricked (?), possibly bootloader is wiped, can it be saved?

So, I let a friend of mine use my old M7 in order to repartition/format an sd card (using an OTG adapter). Came back with phone completely dead. I do suspect he ended up partitioning or formatting one of the system partitions in there (possibly the bootloader?) phone was rooted so...
Anyway, situation is as follows: Phone looks dead. Long pressing the power button does nothing, no vibration, no keys light up, no screen comes on.
BUT, when connecting it to the computer I get the usb connection sound on my Windows 10. If I long press the power button for ~10 seconds, i do get the usb disconnection sound, followed again by the usb connection sound. So "something" is alive in there. Also, power+vol down button does reboot the phone.
However there's no way to access recovery, bootloader, adb/fastboot, or even flash a RUU.
It isn't even charging when I plug it in, no red led.
Anything else I could try before giving up?
Thank you.
akpe said:
So, I let a friend of mine use my old M7 in order to repartition/format an sd card (using an OTG adapter). Came back with phone completely dead. I do suspect he ended up partitioning or formatting one of the system partitions in there (possibly the bootloader?) phone was rooted so...
Anyway, situation is as follows: Phone looks dead. Long pressing the power button does nothing, no vibration, no keys light up, no screen comes on.
BUT, when connecting it to the computer I get the usb connection sound on my Windows 10. If I long press the power button for ~10 seconds, i do get the usb disconnection sound, followed again by the usb connection sound. So "something" is alive in there. Also, power+vol down button does reboot the phone.
However there's no way to access recovery, bootloader, adb/fastboot, or even flash a RUU.
It isn't even charging when I plug it in, no red led.
Anything else I could try before giving up?
Thank you.
Click to expand...
Click to collapse
When you here that USB sound when connecting to your pc, go to the windows device manager and look for devices in the usb section. Is the phone showing as "QHSUSB_DLOAD" or simply "HTC Phone" ?
alray said:
When you here that USB sound when connecting to your pc, go to the windows device manager and look for devices in the usb section. Is the phone showing as "QHSUSB_DLOAD" or simply "HTC Phone" ?
Click to expand...
Click to collapse
Hey, thanks for the reply, sorry for the delay. Yeah, it shows something similar to QHSUSB_DLOAD. Looked it up a bit, guess it's completely borked.
akpe said:
Hey, thanks for the reply, sorry for the delay. Yeah, it shows something similar to QHSUSB_DLOAD. Looked it up a bit, guess it's completely borked.
Click to expand...
Click to collapse
Yep sounds like your phone is in Qualcomm download mode. Usually this can happens for 2 reasons.
1- Hardware failure
2- Bad firmware flash
this thread can help: https://forum.xda-developers.com/showthread.php?t=2770684
Hard to tell since we don't know what your friend exactly did or what was used from that usb-otg drive.
A phone shop that can connect to your phone using jtag/riff could maybe fix it but doesn't worth the $$ asked for a 2013 phone, imo.
alray said:
Yep sounds like your phone is in Qualcomm download mode. Usually this can happens for 2 reasons.
1- Hardware failure
2- Bad firmware flash
this thread can help: https://forum.xda-developers.com/showthread.php?t=2770684
Hard to tell since we don't know what your friend exactly did or what was used from that usb-otg drive.
A phone shop that can connect to your phone using jtag/riff could maybe fix it but doesn't worth the $$ asked for a 2013 phone, imo.
Click to expand...
Click to collapse
As far as he told me, he just used an app to try to format the otg drive, multiple times, and after a reboot phone died. He couldn't remember which app he used, but since phone was rooted, I can only guess he actually tried to format some system partition.
I will give the unbricking project a go, need to find a linux machine first. I really know jack about linux, but I guess it's no harm trying it Thank you!

Categories

Resources