Hi
Firstly, I'm new here, so please don't be too harsh
I tried to install SentinelROM into my i9305, but failed.
I followed the exact instructions by putting the ROM in my internal storage
I'm using CWM v5.5.0.4
When I chose the zip file (the ROM) using "choose zip from internal sdcard", this happened:
Code:
-- Installing: /emmc/sentinelrom_v4_75_i9305.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "
m3" || getprop("ro.build.product") == "m3" ||
getprop("ro.product.device") == "m3xx" || g
etprop("ro.build.prouct") == "m3xx" || g
etprop("ro.product.device") == "i9305" || getpro
p("ro.build.product") == "i9305" || getpr
op("ro.product.device") == "GT-I9305" || getprop
("ro.build.product") == "GT-I9305"
E:Error in /emmc/sentinelrom_v4_75_i9305.zip
(Status 7)
Installation aborted.
I copied the above information exactly as shown on my phone
FYI, I do not have external storage (micro sd card)
Please advise
Try using a newer version of CWM or use Philz Touch Recovery!
It's based on the latest build of CWM and it has extra features like touchscreen support!
Here, look for the I9395 version of it and then flash it either with Odin (or Mobile Odin) or flash the zip through CWM.
Hope it helps
Sent from my GT-I9305 using xda premium
Copy the downloaded SentinelROM zip to your Internal Storage.
Boot into your custom recovery
Back up your stock ROM
Enter custom recovery
Factory Reset and wipe Cache and Dalvik Cache
Format System Partition
Install the ROM
jjpro45 said:
Try using a newer version of CWM or use Philz Touch Recovery!
It's based on the latest build of CWM and it has extra features like touchscreen support!
Here, look for the I9395 version of it and then flash it either with Odin (or Mobile Odin) or flash the zip through CWM.
Hope it helps
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
I followed you advice and the ROM has been successfully installed on my i9305
I used Philz Touch Recovery to install it
Thank you very much!! :good::good:
This thread can now be closed :victory:
JJEgan said:
Copy the downloaded SentinelROM zip to your Internal Storage.
Boot into your custom recovery
Back up your stock ROM
Enter custom recovery
Factory Reset and wipe Cache and Dalvik Cache
Format System Partition
Install the ROM
Click to expand...
Click to collapse
Thank you, but this was exactly what I did and then the problem occurred
As it is now solved, I think the problem was due to CWM
I've successfully installed it using Philz Touch Recovery
I have a Samsung I9001 and I tried several mods. For example the
CM10.1 by ADC: http://forum.xda-developers.com/showthread.php?t=2315448
CM10.2 by ADC: http://forum.xda-developers.com/showthread.php?t=2436670
Mokee Open Source: http://forum.xda-developers.com/showthread.php?t=2425024
and AOKP: http://forum.xda-developers.com/showthread.php?t=2190224
I can format /data, /cache, /system, erase Dalvik cache, install zip's (In the CM mods, I have to delete the
Code:
assert(getprop("ro.product.device") == "ariesve" || getprop("ro.build.product") == "ariesve" ||
getprop("ro.product.device") == "GT-I9001" || getprop("ro.build.product") == "GT-I9001");
from the updater-script, or else I cannot install these mods. AOKP installs without a problem.
But when I boot these mods, they all get stuck at the CM booting logo or the "initiating swagger" logo of AOKP.
I tried installing factory mod of T-Mobile / Netherlands, it worked as expected. I could statup apps, call, sms, etcetera. After that installed AOKP, not passing logo. After that installed CM9 mod: http://forum.xda-developers.com/showthread.php?t=1650615. Not passing spinning CM logo....
I don't know what to do next.
What's missing? And what steps should I take now?
First off all there is no need to remove these lines from the updater-script.
To me its weird that your phone aint booting after installing the custom rom and mods you want.
Are you 1000% sure you have a i9001 and not a i9000?
mrjraider said:
First off all there is no need to remove these lines from the updater-script.
To me its weird that your phone aint booting after installing the custom rom and mods you want.
Are you 1000% sure you have a i9001 and not a i9000?
Click to expand...
Click to collapse
Well, I do have a i9001. I see it when I start the phone, behind the battery, on the package, so I don't think I accidentally think it's one.
I did install the CM9: http://forum.xda-developers.com/showthread.php?t=1650615
This one worked! (Still I had to delete those lines from the update script file)
Do you get some sort of error during flashing?
I was afraid to post this is Development Forum because it isn´t "Development" in any way. It´s the product of several hours of comparing others work, copy´n´paste, pack/unpack Roms and a lot(!) of frustration..
You may download, test, report and, most important, fix bugs of this. Pretty please!
You are using this at your own risk. I am in no way responsible for bricks...think twice before your doing anything.
What is he talking about ?
My Goal was to get i9505 4.3 AOSP based Roms working on our i9295.
Oh! What is working ?
- Display
- Hardware Keys
- Camera (Pictures)
Nice! What´s the Problem ?
- WLan is broken (I have no Idea) -- Medar has provided a fix here -- Thank you very much!
- Video recording (nope, no Idea)
I want to try, what do I have to do ?
- Download a i9505 AOSP based Rom (4.3 of course)
- Download the Patch
- Reboot into Recovery
- Wipe Data/Factory Reset
- Install the AOSP based Rom of your choice
- Install the Patch
- Wipe Cache, -> advanced- Wipe Dalvik Cache
- Install your Gapps
- Reboot into System
- Done!
--Optional
- Get angry about the bugs
- Fix them
- Tell us
I have tested this on Cyanogenmod "cm-10.2-20131206-NIGHTLY-jfltexx" build and SlimRoms "Slim-jfltexx-4.3.build.2.2-OFFICIAL-1762" build. But it should work on more Roms.
ALL Credits for this go to :
- LeJay for the initial unofficial CM Build
- spegelius for the more up-to-date CM Build
- Cyanogenmod
- WinMerge
- Notepad++
- My Wife for her Laptop
- and in advance to anybody working on a better Version/Bug Fixes
This is so nice I'll try it, new hope for ower active
Wow, i really like the idea behind this project! Thank you so much ohwarumbloss!
Gesendet von meinem GT-I9295 mit Tapatalk
considering the s4 GPE is getting 4.4.2 now... and we are trying to get 4.3 on our 4.2 device... I think this phone has been abandoned ... We are like 3 revisions behind.
Globel said:
considering the s4 GPE is getting 4.4.2 now... and we are trying to get 4.3 on our 4.2 device... I think this phone has been abandoned ... We are like 3 revisions behind.
Click to expand...
Click to collapse
Only 2 versions, and we're scheduled to receive 4.3 on December 24. I think the 4.3 to 4.4 has been a problem because Google released them not even 6 months apart from each other, so while companies were finalizing their 4.3 versions, they dropped 4.4.
mrmartin86 said:
Only 2 versions, and we're scheduled to receive 4.3 on December 24. I think the 4.3 to 4.4 has been a problem because Google released them not even 6 months apart from each other, so while companies were finalizing their 4.3 versions, they dropped 4.4.
Click to expand...
Click to collapse
Would you be kind and reveal the source of the scheduled update for S4 Active International? Thanks.
Globel said:
considering the s4 GPE is getting 4.4.2 now... and we are trying to get 4.3 on our 4.2 device... I think this phone has been abandoned ... We are like 3 revisions behind.
Click to expand...
Click to collapse
Never cared very much about Samsung. Or HTC ... Or whatever.
I have a full functional Cyanogenmod on my HTC Wildfire (4.3) which is really old
Spegelius' build of 4.3.1 10.2 is rock stable.
What we really need is a Developer who likes outdoor activities
Greetings
Thomas
PS: spend some days on building my own CM to learn but failed, yet. But Spegelius seems to be pretty successful so let's hope the best
Sent from my GT-I9295 using xda app-developers app
Hi
Using Slim-jfltexx-4.3.build.2.2-OFFICIAL, your patch and Camera JB+ I've manage to record 480,720 and 1080p videos with no lag. The only problem that I've found so far is no wifi conection. Thanks
medar said:
Would you be kind and reveal the source of the scheduled update for S4 Active International? Thanks.
Click to expand...
Click to collapse
Sorry, I was talking about the AT&T version. I neglected to remember that this was a i9295 thread. However, considering even AT&T is getting an update out, that means Samsung had to have done the legwork already to release an update sometime soon.
It would be cool if the patch can be developed to be used with any I9505 ROM on our I9295
Wifi fix for this patch
Flash this over recovery to fix wifi.
Don't forget to click thanks.
moviecut said:
Wow, i really like the idea behind this project! Thank you so much ohwarumbloss!
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
Thanks
I like the fact that it seems to work, slowly, but we're getting activity for our active
medar said:
Using Slim-jfltexx-4.3.build.2.2-OFFICIAL, your patch and Camera JB+ I've manage to record 480,720 and 1080p videos with no lag. The only problem that I've found so far is no wifi conection. Thanks
Click to expand...
Click to collapse
Did you try the WiFi fix provided by medar?
gtchuah said:
It would be cool if the patch can be developed to be used with any I9505 ROM on our I9295
Click to expand...
Click to collapse
4.4 needs real Development but for 4.2 and 4.3 I think, there should be a way.
I don't use Sammy anymore, CM10.2 runs fantastic on my Device.
But, for 4.2 Sammy, you may start with a backed up boot.img from i9295 and restore it after you flashed i9505 Rom. There's nothing you can lose but a lot to win. And, don't we all need a Bootloop here and there, sometimes?
Seriously, worst case would be that you need Odin to flash a working recovery after a fail. Still, it's your own risk
medar said:
Flash this over recovery to fix wifi.
Don't forget to click thanks.
Click to expand...
Click to collapse
Awesome, thanks
Nice to see this!
Sent from my GT-I9295 using xda app-developers app
@ohwarumbloss: could you include a link to medar's fix in the original posting? Otherwise I fear people won't find it when the thread grows
pen² said:
@ohwarumbloss: could you include a link to medar's fix in the original posting? Otherwise I fear people won't find it when the thread grows
Click to expand...
Click to collapse
Yes, doing it right now
I am a fan of MIUI ROM. Coming to SGS4A, there is no porting of this MIUI ROM to SGS4A anymore.
This patch comes to my delight that there may be hope. Hence, with this patch, I'm planning to flash I9505's MIUI ROM (miuiandroid_multi_jfltexx_3.12.13_jb-4.2) to I9295 and flash the patch to see whether it works or not.
However, to my dismay, when I flash the MIUI ROM with CWM 1.2, I encountered the following messages:
assert(getprop("ro.product.device") == "jflte" ||
getprop("ro.build.product") == "jflte" ||
getprop("ro.product.device") == "jfltexx" || getprop("ro.build.product") == "jfltexx" ||
getprop("ro.product.device") == "i9505" || getprop("ro.build.product") == "i9505" ||
getprop("ro.product.device") == "GT-I9505" || getprop("ro.build.product") == "GT-I9505" ||
getprop("ro.product.device") == "jgedlte" || getprop("ro.build.product") == "jgedlte" ||
getprop("ro.product.device") == "i9505g" || getprop("ro.build.product") == "i9505g" ||
getprop("ro.product.device") == "GT-I9505G" || getprop("ro.build.product") == "GT-I9505G")
The installation aborted.
What should I do? Appreciate your expert advice.
hy
I am a fan of MIUI ROM too.. please post back if u made miui working on i9295 thx
Posted this to SlimRom forums: http://forum.slimroms.net/topic/100-galaxy-s4-active/?p=4479
Anyways, got a SlimRom build done and it seems to work. Merry christmas .
gtchuah said:
I am a fan of MIUI ROM. Coming to SGS4A, there is no porting of this MIUI ROM to SGS4A anymore.
This patch comes to my delight that there may be hope. Hence, with this patch, I'm planning to flash I9505's MIUI ROM (miuiandroid_multi_jfltexx_3.12.13_jb-4.2) to I9295 and flash the patch to see whether it works or not.
However, to my dismay, when I flash the MIUI ROM with CWM 1.2, I encountered the following messages:
assert(getprop("ro.product.device") == "jflte" ||
getprop("ro.build.product") == "jflte" ||
getprop("ro.product.device") == "jfltexx" || getprop("ro.build.product") == "jfltexx" ||
getprop("ro.product.device") == "i9505" || getprop("ro.build.product") == "i9505" ||
getprop("ro.product.device") == "GT-I9505" || getprop("ro.build.product") == "GT-I9505" ||
getprop("ro.product.device") == "jgedlte" || getprop("ro.build.product") == "jgedlte" ||
getprop("ro.product.device") == "i9505g" || getprop("ro.build.product") == "i9505g" ||
getprop("ro.product.device") == "GT-I9505G" || getprop("ro.build.product") == "GT-I9505G")
The installation aborted.
What should I do? Appreciate your expert advice.
Click to expand...
Click to collapse
Here´s what you need to do :
- get a tool like 7zip to unpack your downloaded Rom
- after you extracted it, navigate to /META-INF/com/google/android
- get Notepad++ and open the "updater-script"
- delete all lines that include "assert(getprop("ro.product.device") =="
- save the "updater-script"
- use 7zip (or similar) to include
Code:
[I] -META-INF
-system
-boot.img
-file_contexts (if there is such a file)[/I]
- into one .zip File again (like i.e. myrom.zip)
- Place your zip on your SD Card...reboot into recovery...do what you have to do
Don´t forget steps from opening Post, of course.
As always, you´re all alone with this, proceed with caution and at your own risk !!!
Good luck!
spegelius said:
Posted this to SlimRom forums: http://forum.slimroms.net/topic/100-galaxy-s4-active/?p=4479
Anyways, got a SlimRom build done and it seems to work. Merry christmas .
Click to expand...
Click to collapse
Can´t wait to try that out, this is great News !!! Going to be busy with da Family but maybe 26./27. of December I´ll be ready
Merry Christmas to you all
This is what I did from the beginning:
- Using Odin3 v3.07 to flash the original "I9295XXUBMK3"
- Using Odin3 v3.07 to root with "CF-Auto-Root-jflte-jfltexx-gti9505"
- Using Odin3 v3.07 to install "CWM-Recovery-gt-i9295_v1-2"
- Extract "miuiandroid_multi_jfltexx_3.12.13_jb-4.2" and open "\META-INF\com\google\android\updater-script" with Notepad
- Deleted "assert(getprop("ro.product.device") == "jflte".....till..... "GT-I9505G");"
- Re-zip "miuiandroid_multi_jfltexx_3.12.13_jb-4.2"
- Copy "miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip" and "patch.zip" to phone's root folder
- Reboot into Recovery
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Install "miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip"
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Install "patch.zip"
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Reboot
During installation:
-- Installing: /sdcard/0/miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip
Finding update package...
Opening update package...
Installing update...
Formatting system...
Installing system files...
Creating system links...
Set permission...
Update Boot image...
Install from sdcard complete.
-- Installing: /sdcard/0/patch.zip
Finding update package...
Opening update package...
Installing update...
Flasing Patch
Flashing Boot Image...
Don t forget to wipe caches!
Install from sdcard complete."
When I reboot, it just stops at the startup screen, ie, "Samsun Galaxy S4 Active I-9295" indefinitely... no bootloop whatsoever.
What went wrong? And how do I rectify that?
Thanks a million for your help.
gtchuah said:
This is what I did from the beginning:
- Using Odin3 v3.07 to flash the original "I9295XXUBMK3"
- Using Odin3 v3.07 to root with "CF-Auto-Root-jflte-jfltexx-gti9505"
- Using Odin3 v3.07 to install "CWM-Recovery-gt-i9295_v1-2"
- Extract "miuiandroid_multi_jfltexx_3.12.13_jb-4.2" and open "\META-INF\com\google\android\updater-script" with Notepad
- Deleted "assert(getprop("ro.product.device") == "jflte".....till..... "GT-I9505G");"
- Re-zip "miuiandroid_multi_jfltexx_3.12.13_jb-4.2"
- Copy "miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip" and "patch.zip" to phone's root folder
- Reboot into Recovery
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Install "miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip"
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Install "patch.zip"
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Reboot
During installation:
-- Installing: /sdcard/0/miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip
Finding update package...
Opening update package...
Installing update...
Formatting system...
Installing system files...
Creating system links...
Set permission...
Update Boot image...
Install from sdcard complete.
-- Installing: /sdcard/0/patch.zip
Finding update package...
Opening update package...
Installing update...
Flasing Patch
Flashing Boot Image...
Don t forget to wipe caches!
Install from sdcard complete."
When I reboot, it just stops at the startup screen, ie, "Samsun Galaxy S4 Active I-9295" indefinitely... no bootloop whatsoever.
What went wrong? And how do I rectify that?
Thanks a million for your help.
Click to expand...
Click to collapse
The Kernel inside the "Patch.zip" is a 4.3 Kernel.
But you try to use a Miui port based on a 4.2..
This means you need another Kernel.
One way could be to backup your Galaxy S4 active Sammy ROM after you flashed CWM recovery, then install the Miui port, go straight back to ->backup & restore ->advanced restore->choose your backup and restore "boot.img".
Then wipe cache & dalvik cache and reboot.
This may work, it should, but there is no guarantee.
Good luck
Sent from my GT-I9295 using xda app-developers app
hay,
i want to install new 4.4.2 rom, and i have the stock rom GB.
i have to install new recovery: http://forum.xda-developers.com/showthread.php?t=2463347
but i tried to install:
20130929 TWRP v2.6.3.0 Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.0)
and
20130929 CWM v6.0.3.8 No Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.0)
but they both have the same problem. im connecting to the recovery, install zip from sdcard, choose zip from internal sdcard and choose the file. it working and then showing me:
installing update...
assert failed: getprop("ro.product.device") == "ariesve" || getprop(ro.build.product) == "aroesve" || getprop(ro.product.device) == "GT-I9001" || getprop(ro.build.product) == "GT-I19001"
E: error in /emmc/TWRP_2.6.3.0_ariesve_20130929_ADCT_fixed_singed.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
how can i change rom with this recovery? this recovery is stupid and nor works fine.
help plz.
DanielMit said:
hay,
i want to install new 4.4.2 rom, and i have the stock rom GB.
i have to install new recovery: http://forum.xda-developers.com/showthread.php?t=2463347
but i tried to install:
20130929 TWRP v2.6.3.0 Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.0)
and
20130929 CWM v6.0.3.8 No Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.0)
but they both have the same problem. im connecting to the recovery, install zip from sdcard, choose zip from internal sdcard and choose the file. it working and then showing me:
how can i change rom with this recovery? this recovery is stupid and nor works fine.
help plz.
Click to expand...
Click to collapse
Can you send me the updater-script? If you don't know what it is, It'll be located in the ROM zip in META-INF>com>google>android. All you have to do is extract the file Updater-script and send it to me.
NOTE: DO NOT extract the whole ROM itself.
Hallo, I hope someone in this forum can help me with a problem with my SM-T819 TWRP.
I tried to install a CustomRom without making a back-up copy and apparently I removed all details on the tablet.
The installation of TWRP was succesful, however all my recent trials to install a CustomRom failed with the following comments:
Updating partition details….
…done
Full SELinux support is present
MTP enabled
Installing zip file `/sdcard1/lineage-16.0-20181203_161503-Unofficial-gts210velte.zip`
Checking for digest file...
Updater process ended with ERROR: 7
Error installing zip file `/sdcard1/lineage-16.0-20181203_161503-Unofficial-gts210velte.zip`
Updating partition details…
…done
installing zip file `/ sdcard1/lineage-16.0-20181203_161503-Unofficial-gts210velte.zip`
Checking for digest file...
Warning: No file_contexts
Comparing TZ version TZ.BF.3.0.3-00054 to TZ.BF.3.0.3-00077
Comparing TZ version TZ.BF.3.0.3-00064 to TZ.BF.3.0.3-00077
Comparing TZ version TZ.BF.3.0.3-00067 to TZ.BF.3.0.3-00077
Comparing TZ version TZ.BF.3.0.3-00071 to TZ.BF.3.0.3-00077
assert failed: samsung.verify_trustzone ("TZ.BF.3.0.3-00054", "TZ.BF.3.0.3-00044",
"TZ.BF.3.0.3-00067", "TZ.BF.3.0.3-00071") == "1"
Updater process ended with ERROR: 7
Error installing zip file `/sdcard1/lineage-16.0-20181203_161503-Unofficial-gts210velte.zip`
Updating partition details…
… done
I have done this trial with various TWRP and Lineage varieties but in vain and always with the identical error.
The only thing I could do was via TWRP the installation of “SMT819_Deodex_Debloated Custom Rom” (based on Stock-Samsung-Firmware.
I have also tried via Odin (several versions) to apply the original firmware. The installation proceeds without error, the tablet starts,
the progress is shown on the blue screen and every time it is cancelled after 25 % and 32%. Then the tab shuts down and starts again and remains in a continous loop with the splash screen.
Well, what is the reason to install a ... REALLY REALLY OLD version like this?
Try this https://lineageos.wickenberg.nu/gts210velte/ or that https://drive.google.com/drive/folders/1VsHc9-k4LA3-n19dp6Gkvqwf0GZLTRcA depending on what you want to have, LOS 16 or 17.1