[SOLVED] Problem in installing SentinelROM - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

Hi
Firstly, I'm new here, so please don't be too harsh
I tried to install SentinelROM into my i9305, but failed.
I followed the exact instructions by putting the ROM in my internal storage
I'm using CWM v5.5.0.4
When I chose the zip file (the ROM) using "choose zip from internal sdcard", this happened:
Code:
-- Installing: /emmc/sentinelrom_v4_75_i9305.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "
m3" || getprop("ro.build.product") == "m3" ||
getprop("ro.product.device") == "m3xx" || g
etprop("ro.build.prouct") == "m3xx" || g
etprop("ro.product.device") == "i9305" || getpro
p("ro.build.product") == "i9305" || getpr
op("ro.product.device") == "GT-I9305" || getprop
("ro.build.product") == "GT-I9305"
E:Error in /emmc/sentinelrom_v4_75_i9305.zip
(Status 7)
Installation aborted.
I copied the above information exactly as shown on my phone
FYI, I do not have external storage (micro sd card)
Please advise

Try using a newer version of CWM or use Philz Touch Recovery!
It's based on the latest build of CWM and it has extra features like touchscreen support!
Here, look for the I9395 version of it and then flash it either with Odin (or Mobile Odin) or flash the zip through CWM.
Hope it helps
Sent from my GT-I9305 using xda premium

Copy the downloaded SentinelROM zip to your Internal Storage.
Boot into your custom recovery
Back up your stock ROM
Enter custom recovery
Factory Reset and wipe Cache and Dalvik Cache
Format System Partition
Install the ROM

jjpro45 said:
Try using a newer version of CWM or use Philz Touch Recovery!
It's based on the latest build of CWM and it has extra features like touchscreen support!
Here, look for the I9395 version of it and then flash it either with Odin (or Mobile Odin) or flash the zip through CWM.
Hope it helps
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
I followed you advice and the ROM has been successfully installed on my i9305
I used Philz Touch Recovery to install it
Thank you very much!! :good::good:
This thread can now be closed :victory:

JJEgan said:
Copy the downloaded SentinelROM zip to your Internal Storage.
Boot into your custom recovery
Back up your stock ROM
Enter custom recovery
Factory Reset and wipe Cache and Dalvik Cache
Format System Partition
Install the ROM
Click to expand...
Click to collapse
Thank you, but this was exactly what I did and then the problem occurred
As it is now solved, I think the problem was due to CWM
I've successfully installed it using Philz Touch Recovery

Related

[Q] Root S3 I9305 4.1.2 I9305 JZO54K.I9305XXBMB5

Hi,
I want root my S3 I9305 4.1.2 I9305 JZO54K.I9305XXBMB5
Can I use ToolKit V7.0 ?
Which select International LTE (GT-I9305)
15. Android 4.1.2 (Build JZO54K BLL3)
or
16. Android 4.1.2 (Build JZO54K BLL5)
How I can root it please help me step bay step?
1. Download and copy zipfile (avatar-3.0-arion-1361-20130629-i9305.zip ROM version choice) to internal or external SD card. Check MD5.
2. Boot to recovery.
3. Wipe cache, dalvic cache, wipe data
4. Install zip from SD Card > choose zip
5. select avatar-3.0-arion-1361-20130629-i9305.zip install
6. GET ERROR
Installing update...
assert failed: getprop("ro.product.device") == "m3" || getprop("ro.build.product.device")== "m3xx"||getprop("ro.build.product") =="m3xx"||getprop("ro.product.device")=="i9305"||getprop("ro.build.product") =="i9305"|| getprop("ro.build.product.device")== "GT-I9305"
E: Error in sdcard/roms/avatar-3.0-arion-1361-20130629-i9305.zip
(Status 7)
Installation aborted.
What I did wrong ?
I should ask in that roms thread .
jje
Use framaroot app to root, search my thread.
Sent from my GT-I9305 using xda premium
If you want to root your device, I suggest you use CF-Auto Root.This method is a high success rate.Before I used this method root in I9305ZHBMD1.
Sorry for my bad English :banghead:

Tried several mods, don't get past logo's

I have a Samsung I9001 and I tried several mods. For example the
CM10.1 by ADC: http://forum.xda-developers.com/showthread.php?t=2315448
CM10.2 by ADC: http://forum.xda-developers.com/showthread.php?t=2436670
Mokee Open Source: http://forum.xda-developers.com/showthread.php?t=2425024
and AOKP: http://forum.xda-developers.com/showthread.php?t=2190224
I can format /data, /cache, /system, erase Dalvik cache, install zip's (In the CM mods, I have to delete the
Code:
assert(getprop("ro.product.device") == "ariesve" || getprop("ro.build.product") == "ariesve" ||
getprop("ro.product.device") == "GT-I9001" || getprop("ro.build.product") == "GT-I9001");
from the updater-script, or else I cannot install these mods. AOKP installs without a problem.
But when I boot these mods, they all get stuck at the CM booting logo or the "initiating swagger" logo of AOKP.
I tried installing factory mod of T-Mobile / Netherlands, it worked as expected. I could statup apps, call, sms, etcetera. After that installed AOKP, not passing logo. After that installed CM9 mod: http://forum.xda-developers.com/showthread.php?t=1650615. Not passing spinning CM logo....
I don't know what to do next.
What's missing? And what steps should I take now?
First off all there is no need to remove these lines from the updater-script.
To me its weird that your phone aint booting after installing the custom rom and mods you want.
Are you 1000% sure you have a i9001 and not a i9000?
mrjraider said:
First off all there is no need to remove these lines from the updater-script.
To me its weird that your phone aint booting after installing the custom rom and mods you want.
Are you 1000% sure you have a i9001 and not a i9000?
Click to expand...
Click to collapse
Well, I do have a i9001. I see it when I start the phone, behind the battery, on the package, so I don't think I accidentally think it's one.
I did install the CM9: http://forum.xda-developers.com/showthread.php?t=1650615
This one worked! (Still I had to delete those lines from the update script file)
Do you get some sort of error during flashing?

Some kind of patch for i9295 to use AOSP based 4.3 Roms

I was afraid to post this is Development Forum because it isn´t "Development" in any way. It´s the product of several hours of comparing others work, copy´n´paste, pack/unpack Roms and a lot(!) of frustration..
You may download, test, report and, most important, fix bugs of this. Pretty please!
You are using this at your own risk. I am in no way responsible for bricks...think twice before your doing anything.
What is he talking about ?
My Goal was to get i9505 4.3 AOSP based Roms working on our i9295.
Oh! What is working ?
- Display
- Hardware Keys
- Camera (Pictures)
Nice! What´s the Problem ?
- WLan is broken (I have no Idea) -- Medar has provided a fix here -- Thank you very much!
- Video recording (nope, no Idea)
I want to try, what do I have to do ?
- Download a i9505 AOSP based Rom (4.3 of course)
- Download the Patch
- Reboot into Recovery
- Wipe Data/Factory Reset
- Install the AOSP based Rom of your choice
- Install the Patch
- Wipe Cache, -> advanced- Wipe Dalvik Cache
- Install your Gapps
- Reboot into System
- Done!
--Optional
- Get angry about the bugs
- Fix them
- Tell us
I have tested this on Cyanogenmod "cm-10.2-20131206-NIGHTLY-jfltexx" build and SlimRoms "Slim-jfltexx-4.3.build.2.2-OFFICIAL-1762" build. But it should work on more Roms.
ALL Credits for this go to :
- LeJay for the initial unofficial CM Build
- spegelius for the more up-to-date CM Build
- Cyanogenmod
- WinMerge
- Notepad++
- My Wife for her Laptop
- and in advance to anybody working on a better Version/Bug Fixes
This is so nice I'll try it, new hope for ower active
Wow, i really like the idea behind this project! Thank you so much ohwarumbloss!
Gesendet von meinem GT-I9295 mit Tapatalk
considering the s4 GPE is getting 4.4.2 now... and we are trying to get 4.3 on our 4.2 device... I think this phone has been abandoned ... We are like 3 revisions behind.
Globel said:
considering the s4 GPE is getting 4.4.2 now... and we are trying to get 4.3 on our 4.2 device... I think this phone has been abandoned ... We are like 3 revisions behind.
Click to expand...
Click to collapse
Only 2 versions, and we're scheduled to receive 4.3 on December 24. I think the 4.3 to 4.4 has been a problem because Google released them not even 6 months apart from each other, so while companies were finalizing their 4.3 versions, they dropped 4.4.
mrmartin86 said:
Only 2 versions, and we're scheduled to receive 4.3 on December 24. I think the 4.3 to 4.4 has been a problem because Google released them not even 6 months apart from each other, so while companies were finalizing their 4.3 versions, they dropped 4.4.
Click to expand...
Click to collapse
Would you be kind and reveal the source of the scheduled update for S4 Active International? Thanks.
Globel said:
considering the s4 GPE is getting 4.4.2 now... and we are trying to get 4.3 on our 4.2 device... I think this phone has been abandoned ... We are like 3 revisions behind.
Click to expand...
Click to collapse
Never cared very much about Samsung. Or HTC ... Or whatever.
I have a full functional Cyanogenmod on my HTC Wildfire (4.3) which is really old
Spegelius' build of 4.3.1 10.2 is rock stable.
What we really need is a Developer who likes outdoor activities
Greetings
Thomas
PS: spend some days on building my own CM to learn but failed, yet. But Spegelius seems to be pretty successful so let's hope the best
Sent from my GT-I9295 using xda app-developers app
Hi
Using Slim-jfltexx-4.3.build.2.2-OFFICIAL, your patch and Camera JB+ I've manage to record 480,720 and 1080p videos with no lag. The only problem that I've found so far is no wifi conection. Thanks
medar said:
Would you be kind and reveal the source of the scheduled update for S4 Active International? Thanks.
Click to expand...
Click to collapse
Sorry, I was talking about the AT&T version. I neglected to remember that this was a i9295 thread. However, considering even AT&T is getting an update out, that means Samsung had to have done the legwork already to release an update sometime soon.
It would be cool if the patch can be developed to be used with any I9505 ROM on our I9295
Wifi fix for this patch
Flash this over recovery to fix wifi.
Don't forget to click thanks.
moviecut said:
Wow, i really like the idea behind this project! Thank you so much ohwarumbloss!
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
Thanks
I like the fact that it seems to work, slowly, but we're getting activity for our active
medar said:
Using Slim-jfltexx-4.3.build.2.2-OFFICIAL, your patch and Camera JB+ I've manage to record 480,720 and 1080p videos with no lag. The only problem that I've found so far is no wifi conection. Thanks
Click to expand...
Click to collapse
Did you try the WiFi fix provided by medar?
gtchuah said:
It would be cool if the patch can be developed to be used with any I9505 ROM on our I9295
Click to expand...
Click to collapse
4.4 needs real Development but for 4.2 and 4.3 I think, there should be a way.
I don't use Sammy anymore, CM10.2 runs fantastic on my Device.
But, for 4.2 Sammy, you may start with a backed up boot.img from i9295 and restore it after you flashed i9505 Rom. There's nothing you can lose but a lot to win. And, don't we all need a Bootloop here and there, sometimes?
Seriously, worst case would be that you need Odin to flash a working recovery after a fail. Still, it's your own risk
medar said:
Flash this over recovery to fix wifi.
Don't forget to click thanks.
Click to expand...
Click to collapse
Awesome, thanks
Nice to see this!
Sent from my GT-I9295 using xda app-developers app
@ohwarumbloss: could you include a link to medar's fix in the original posting? Otherwise I fear people won't find it when the thread grows
pen² said:
@ohwarumbloss: could you include a link to medar's fix in the original posting? Otherwise I fear people won't find it when the thread grows
Click to expand...
Click to collapse
Yes, doing it right now
I am a fan of MIUI ROM. Coming to SGS4A, there is no porting of this MIUI ROM to SGS4A anymore.
This patch comes to my delight that there may be hope. Hence, with this patch, I'm planning to flash I9505's MIUI ROM (miuiandroid_multi_jfltexx_3.12.13_jb-4.2) to I9295 and flash the patch to see whether it works or not.
However, to my dismay, when I flash the MIUI ROM with CWM 1.2, I encountered the following messages:
assert(getprop("ro.product.device") == "jflte" ||
getprop("ro.build.product") == "jflte" ||
getprop("ro.product.device") == "jfltexx" || getprop("ro.build.product") == "jfltexx" ||
getprop("ro.product.device") == "i9505" || getprop("ro.build.product") == "i9505" ||
getprop("ro.product.device") == "GT-I9505" || getprop("ro.build.product") == "GT-I9505" ||
getprop("ro.product.device") == "jgedlte" || getprop("ro.build.product") == "jgedlte" ||
getprop("ro.product.device") == "i9505g" || getprop("ro.build.product") == "i9505g" ||
getprop("ro.product.device") == "GT-I9505G" || getprop("ro.build.product") == "GT-I9505G")
The installation aborted.
What should I do? Appreciate your expert advice.
hy
I am a fan of MIUI ROM too.. please post back if u made miui working on i9295 thx
Posted this to SlimRom forums: http://forum.slimroms.net/topic/100-galaxy-s4-active/?p=4479
Anyways, got a SlimRom build done and it seems to work. Merry christmas .
gtchuah said:
I am a fan of MIUI ROM. Coming to SGS4A, there is no porting of this MIUI ROM to SGS4A anymore.
This patch comes to my delight that there may be hope. Hence, with this patch, I'm planning to flash I9505's MIUI ROM (miuiandroid_multi_jfltexx_3.12.13_jb-4.2) to I9295 and flash the patch to see whether it works or not.
However, to my dismay, when I flash the MIUI ROM with CWM 1.2, I encountered the following messages:
assert(getprop("ro.product.device") == "jflte" ||
getprop("ro.build.product") == "jflte" ||
getprop("ro.product.device") == "jfltexx" || getprop("ro.build.product") == "jfltexx" ||
getprop("ro.product.device") == "i9505" || getprop("ro.build.product") == "i9505" ||
getprop("ro.product.device") == "GT-I9505" || getprop("ro.build.product") == "GT-I9505" ||
getprop("ro.product.device") == "jgedlte" || getprop("ro.build.product") == "jgedlte" ||
getprop("ro.product.device") == "i9505g" || getprop("ro.build.product") == "i9505g" ||
getprop("ro.product.device") == "GT-I9505G" || getprop("ro.build.product") == "GT-I9505G")
The installation aborted.
What should I do? Appreciate your expert advice.
Click to expand...
Click to collapse
Here´s what you need to do :
- get a tool like 7zip to unpack your downloaded Rom
- after you extracted it, navigate to /META-INF/com/google/android
- get Notepad++ and open the "updater-script"
- delete all lines that include "assert(getprop("ro.product.device") =="
- save the "updater-script"
- use 7zip (or similar) to include
Code:
[I] -META-INF
-system
-boot.img
-file_contexts (if there is such a file)[/I]
- into one .zip File again (like i.e. myrom.zip)
- Place your zip on your SD Card...reboot into recovery...do what you have to do
Don´t forget steps from opening Post, of course.
As always, you´re all alone with this, proceed with caution and at your own risk !!!
Good luck!
spegelius said:
Posted this to SlimRom forums: http://forum.slimroms.net/topic/100-galaxy-s4-active/?p=4479
Anyways, got a SlimRom build done and it seems to work. Merry christmas .
Click to expand...
Click to collapse
Can´t wait to try that out, this is great News !!! Going to be busy with da Family but maybe 26./27. of December I´ll be ready
Merry Christmas to you all
This is what I did from the beginning:
- Using Odin3 v3.07 to flash the original "I9295XXUBMK3"
- Using Odin3 v3.07 to root with "CF-Auto-Root-jflte-jfltexx-gti9505"
- Using Odin3 v3.07 to install "CWM-Recovery-gt-i9295_v1-2"
- Extract "miuiandroid_multi_jfltexx_3.12.13_jb-4.2" and open "\META-INF\com\google\android\updater-script" with Notepad
- Deleted "assert(getprop("ro.product.device") == "jflte".....till..... "GT-I9505G");"
- Re-zip "miuiandroid_multi_jfltexx_3.12.13_jb-4.2"
- Copy "miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip" and "patch.zip" to phone's root folder
- Reboot into Recovery
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Install "miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip"
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Install "patch.zip"
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Reboot
During installation:
-- Installing: /sdcard/0/miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip
Finding update package...
Opening update package...
Installing update...
Formatting system...
Installing system files...
Creating system links...
Set permission...
Update Boot image...
Install from sdcard complete.
-- Installing: /sdcard/0/patch.zip
Finding update package...
Opening update package...
Installing update...
Flasing Patch
Flashing Boot Image...
Don t forget to wipe caches!
Install from sdcard complete."
When I reboot, it just stops at the startup screen, ie, "Samsun Galaxy S4 Active I-9295" indefinitely... no bootloop whatsoever.
What went wrong? And how do I rectify that?
Thanks a million for your help.
gtchuah said:
This is what I did from the beginning:
- Using Odin3 v3.07 to flash the original "I9295XXUBMK3"
- Using Odin3 v3.07 to root with "CF-Auto-Root-jflte-jfltexx-gti9505"
- Using Odin3 v3.07 to install "CWM-Recovery-gt-i9295_v1-2"
- Extract "miuiandroid_multi_jfltexx_3.12.13_jb-4.2" and open "\META-INF\com\google\android\updater-script" with Notepad
- Deleted "assert(getprop("ro.product.device") == "jflte".....till..... "GT-I9505G");"
- Re-zip "miuiandroid_multi_jfltexx_3.12.13_jb-4.2"
- Copy "miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip" and "patch.zip" to phone's root folder
- Reboot into Recovery
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Install "miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip"
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Install "patch.zip"
- Wipe Data/Factory Reset
- Wipe Dalvik Cache
- Reboot
During installation:
-- Installing: /sdcard/0/miuiandroid_multi_jfltexx_3.12.13_jb-4.2.zip
Finding update package...
Opening update package...
Installing update...
Formatting system...
Installing system files...
Creating system links...
Set permission...
Update Boot image...
Install from sdcard complete.
-- Installing: /sdcard/0/patch.zip
Finding update package...
Opening update package...
Installing update...
Flasing Patch
Flashing Boot Image...
Don t forget to wipe caches!
Install from sdcard complete."
When I reboot, it just stops at the startup screen, ie, "Samsun Galaxy S4 Active I-9295" indefinitely... no bootloop whatsoever.
What went wrong? And how do I rectify that?
Thanks a million for your help.
Click to expand...
Click to collapse
The Kernel inside the "Patch.zip" is a 4.3 Kernel.
But you try to use a Miui port based on a 4.2..
This means you need another Kernel.
One way could be to backup your Galaxy S4 active Sammy ROM after you flashed CWM recovery, then install the Miui port, go straight back to ->backup & restore ->advanced restore->choose your backup and restore "boot.img".
Then wipe cache & dalvik cache and reboot.
This may work, it should, but there is no guarantee.
Good luck
Sent from my GT-I9295 using xda app-developers app

[Q] Problem installing PacMan

I've sucessfully flashed several ROMs to my htc One m7ul, I've followed the convert your device to a google plus edition changing my model name and I've been able to install other m7ul based roms on my device (AOKP for example) but when i download the pacman roms from the official Pacman site under their Other and Stable section for the m7ul and try to install it (after making a wipe) i get the following in my log:
+------------------------------------------------------------------------------------------------+
Installing '/sdcard/Download/pac_m7ul_4.3-build(rest cut off?)
Checking for MD5 file . . .
Skipping MD5 check: no MD5 file found.
assert failed: getprop("ro.product.device") == (rest cut off?)
getprop("ro.product.device") == "m7ul" | (rest cut off?)
E: Error excuting updater binary in zip '/sdcar (rest cut off?)
Error flashing zip '/sdcard/Download/pac_m7ul_4 (rest cut off?)
Updating partition details . . .
+------------------------------------------------------------------------------------------------+
the "(rest cut off)" being where i think theres more text to the error but due to the screen formatting it looks like its being cut, I'm using TWRP recovery, have an unlocked bootloader and have s-off, Can anyone help me?
I've been able to install the ROM by using AndroidKitchen to extract the updater-script and edit it. The homescreen is very buggy, no wallpaper display, bootloop issues. I'm Changin the kernels to try and help but im not sure if this is a rom issue or a kernel issue. Does anyone have this ROM installed? and if so what kernel are you using?

[GT-I9001][Q] problem while installing new recovery

hay,
i want to install new 4.4.2 rom, and i have the stock rom GB.
i have to install new recovery: http://forum.xda-developers.com/showthread.php?t=2463347
but i tried to install:
20130929 TWRP v2.6.3.0 Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.0)
and
20130929 CWM v6.0.3.8 No Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.0)
but they both have the same problem. im connecting to the recovery, install zip from sdcard, choose zip from internal sdcard and choose the file. it working and then showing me:
installing update...
assert failed: getprop("ro.product.device") == "ariesve" || getprop(ro.build.product) == "aroesve" || getprop(ro.product.device) == "GT-I9001" || getprop(ro.build.product) == "GT-I19001"
E: error in /emmc/TWRP_2.6.3.0_ariesve_20130929_ADCT_fixed_singed.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
how can i change rom with this recovery? this recovery is stupid and nor works fine.
help plz.
DanielMit said:
hay,
i want to install new 4.4.2 rom, and i have the stock rom GB.
i have to install new recovery: http://forum.xda-developers.com/showthread.php?t=2463347
but i tried to install:
20130929 TWRP v2.6.3.0 Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.0)
and
20130929 CWM v6.0.3.8 No Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.0)
but they both have the same problem. im connecting to the recovery, install zip from sdcard, choose zip from internal sdcard and choose the file. it working and then showing me:
how can i change rom with this recovery? this recovery is stupid and nor works fine.
help plz.
Click to expand...
Click to collapse
Can you send me the updater-script? If you don't know what it is, It'll be located in the ROM zip in META-INF>com>google>android. All you have to do is extract the file Updater-script and send it to me.
NOTE: DO NOT extract the whole ROM itself.

Categories

Resources