Hi, Im trying to install PA but I get an errormessage saying :
Installing update...
set_perm: some changes failed
E:Error in mnt/sdcard/bluetooth/pa_galaxysmtd-1.99_13august2012.zip
(status 7)
Installation aborted
Im running 2.3.6 with latest SpeedMod.
I cleared cache and did factory reset.
Any advice ?
Wich recovery do you use?
I think stock (background is android out a box)
If so:
Download: http://www.mediafire.com/?6qtveztq9997b6n
Put on SD and install it. Reboot phone and then you can install any rom u want!
i have the same error with cwm 6.0.1.0
gonna try this recovery
Hi
Firstly, I'm new here, so please don't be too harsh
I tried to install SentinelROM into my i9305, but failed.
I followed the exact instructions by putting the ROM in my internal storage
I'm using CWM v5.5.0.4
When I chose the zip file (the ROM) using "choose zip from internal sdcard", this happened:
Code:
-- Installing: /emmc/sentinelrom_v4_75_i9305.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "
m3" || getprop("ro.build.product") == "m3" ||
getprop("ro.product.device") == "m3xx" || g
etprop("ro.build.prouct") == "m3xx" || g
etprop("ro.product.device") == "i9305" || getpro
p("ro.build.product") == "i9305" || getpr
op("ro.product.device") == "GT-I9305" || getprop
("ro.build.product") == "GT-I9305"
E:Error in /emmc/sentinelrom_v4_75_i9305.zip
(Status 7)
Installation aborted.
I copied the above information exactly as shown on my phone
FYI, I do not have external storage (micro sd card)
Please advise
Try using a newer version of CWM or use Philz Touch Recovery!
It's based on the latest build of CWM and it has extra features like touchscreen support!
Here, look for the I9395 version of it and then flash it either with Odin (or Mobile Odin) or flash the zip through CWM.
Hope it helps
Sent from my GT-I9305 using xda premium
Copy the downloaded SentinelROM zip to your Internal Storage.
Boot into your custom recovery
Back up your stock ROM
Enter custom recovery
Factory Reset and wipe Cache and Dalvik Cache
Format System Partition
Install the ROM
jjpro45 said:
Try using a newer version of CWM or use Philz Touch Recovery!
It's based on the latest build of CWM and it has extra features like touchscreen support!
Here, look for the I9395 version of it and then flash it either with Odin (or Mobile Odin) or flash the zip through CWM.
Hope it helps
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
I followed you advice and the ROM has been successfully installed on my i9305
I used Philz Touch Recovery to install it
Thank you very much!! :good::good:
This thread can now be closed :victory:
JJEgan said:
Copy the downloaded SentinelROM zip to your Internal Storage.
Boot into your custom recovery
Back up your stock ROM
Enter custom recovery
Factory Reset and wipe Cache and Dalvik Cache
Format System Partition
Install the ROM
Click to expand...
Click to collapse
Thank you, but this was exactly what I did and then the problem occurred
As it is now solved, I think the problem was due to CWM
I've successfully installed it using Philz Touch Recovery
Hello
I tried to install different Rom from different sites but every time I apply the update from the Recovery menu, the installation hangs for error Error in / tmp / sideload / ... (status 0)
I also tried to format the SD card but the error persists ... I also installed cwm ...
I seem to have tried one of these 2 ROM:
...needrom.com/mobile/galaxy-ace-s5830
...needrom.com/mobile/s5830-galaxy-ace
Currently there is Android 2.3.6 and if I install updates, the cel says it is updated
you must install cwm and then at cwm install zip from sdcard and not aplly update
tethering
graineeg said:
you must install cwm and then at cwm install zip from sdcard and not aplly update
Click to expand...
Click to collapse
Now it's works: Now there's cyanogenmod (ANDROID 4.2.1).
The only thing that doesn't works is tethering (and wifi hotspot).
I have vodafone...
Thanks
Stefano
Hi,
I need help because after 20 hours of trying i gave up.
I've tried like 8 guides of how to update the rom and it always failed.
I tried 10+ rom versions and put them on sd card and it fails with "status 7" or just "aborted" with no reason.
i'm using cwm 6.0.3.0, and when i try to update it using odin it also fail.
also when i try to load the original stock rom for my country it fails with no reason just "aborted".
I also tried fastboot in download mode but it wont recognize my device even with correct drivers.
now the worst problem is that when i restore it to the previews backup it works but the device is unusable, stuck after one minute.
I'm really frustrated and i hop to get some help here.
Thanks
Download KitKat ROM, PA Gapps and most recent SuperSU v1.94 http://download.chainfire.eu/supersu
+++ the 1&Only guide +++
- Download Raw kernel r4 r3p2 test > http://ge.tt/m/4wso5Hx
- Flash Raw kernel in your old recovery
- Go to advanced > choose reboot recovery! (Not System)
- Now in Raw kernel recovery CWM 6.0.4.4, you can
--- Flash KitKat ROM
--- Flash PA Gapps (full modular recommended)
--- Flash SuperSU
- Wipe data / factory reset
- Reboot
> You're on KitKat.
Status 7 > you need a recovery which is full SELinux compatible.
AA1973 said:
- Flash Raw kernel in your old recovery
Click to expand...
Click to collapse
Should i do it within bootloader or odin?
***
tried to flash raw within recovery mode and got:
"E:Can't open /sdcard/raw_kernel_r3p2_test.zip
(bad)
Installation aborted."
From which recovery are you flashing right now?
Screenshot of about phone information, please?
Are you on stock recovery 3e right now.
Some more details of your exact setup, please.
Or bad download of raw kernel. Can you open the zip file?
Ok solved it,
Thanks man!
How?
AA1973 said:
How?
Click to expand...
Click to collapse
I solved my last problem by copying the files to the sd card again.
i'm using "omni-4.4.2-20140328-n7000-NIGHTLY" rom right now
Got stuck trying to update to kitkat (me too)
Dear Experts,
I believe my case is very similar to that starting this thread so I thought I'd just continue (hopefully not violating rules).
My Android was ICS stock version and my wish was to upgrade to KitKat.
(I did not make any backup.)
I followed these steps:
I rooted my system and installed PhilZ Touch 3 CWM Base version 6.0.2.7.
Then I proceeded to the upgrade following this guide:
"Update Galaxy Note N7000 to Android 4.4.2 KitKat Lightning ROM"
[sorry, am not allowed yet to insert ext links]
Step 10 resulted for me in:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/N7000-STABLEv1.zip
(Status 7)
Installation aborted
I retried step 10 using SlimKat - N7000 but with the same (Status 7) result.
This CWM seems ready further actions although it keeps looping even upon switch-offs (needed to remove battery to switch off effectively).
I hope all details have been given.
Please do advise me about further steps.
Thank you,
R.
raphele said:
Dear Experts,
I believe my case is very similar to that starting this thread so I thought I'd just continue (hopefully not violating rules).
My Android was ICS stock version and my wish was to upgrade to KitKat.
(I did not make any backup.)
I followed these steps:
I rooted my system and installed PhilZ Touch 3 CWM Base version 6.0.2.7.
Then I proceeded to the upgrade following this guide:
"Update Galaxy Note N7000 to Android 4.4.2 KitKat Lightning ROM"
[sorry, am not allowed yet to insert ext links]
Step 10 resulted for me in:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/N7000-STABLEv1.zip
(Status 7)
Installation aborted
I retried step 10 using SlimKat - N7000 but with the same (Status 7) result.
This CWM seems ready further actions although it keeps looping even upon switch-offs (needed to remove battery to switch off effectively).
I hope all details have been given.
Please do advise me about further steps.
Thank you,
R.
Click to expand...
Click to collapse
Simple download the latest philz touch, flash it with recovery reboot your recovery and flash the rom u desired. Your recovery is outdated hence status seven error
Sent from my GT-I9300 using XDA Premium 4 mobile app
Thank you Nic2215 and hello every helping soul!
I downloaded the latest file, MD5 checked OK.
Was not sure to be able to boot into recovery but kept the three buttons pressed while inserting the battery (current way to switch on) but I believe I succeeded in that.
Later I just chose boot into ecovery from within CWM menu.
Anyway it's been no success for me:
E:Error in /sdcard/philz_touch_6.25.0-n7000.zip
(Status 7)
Installation aborted
BTW I noticed one detail - in the About section of CWM it reads among other lines:
Build version: 3.99 - i9100
I am quite sure I'd followed all rooting steps correctly:
http://forum.xda-developers.com/showthread.php?t=2217840
and picked a zip file compatible with N7000 and my kernel XXLRI:
http://forum.xda-developers.com/showthread.php?t=1901191
-> PhilZ-cwm6 v3.99 with CWM 6.0.2.7 based recovery
-> PhilZ-cwm6-XXLRI-AUT-v3.99
Anybody able to help?
R.
You must have CWM 6.0.<b>4.4</b> or higher, which is fully SELinux compatible for KitKat.<br />
Just flash Raw kernel r4, reboot in recovery (of raw kernel ) and then do your flash and wipes.<br />
You can't simply install a newer recovery on our device, as kernel and recovery are bound together, but ...THIS IS BASIC KNOWLEDGE FOR OUR DEVICE!!! <br />
#failĀ²<br/>
I appreciate your help.
Following your advice I found this resource:
-> [KERNEL][AOSP][10 Dec.] Raw Kernel r5 -- simple&fast kernel -- some KitKat love
but I can see:
Download :
r5 for KK4.4 (announce)
r4 for JB4.3 (announce)
Just would like to make sure that r4 - not r5 - fits my needs towards KitKat.
Suppose r4, then please assure me that my plan is correct:
1. Download raw_kernel_r4_j43.zip
2. On N7000 VolUp+Home+Pwr -> Install Zip -> Choose zip from sdcard -> raw_kernel_r4_j43.zip
3. Advanced -> Reboot Recovery
4. -> Install Zip -> Choose zip from sdcard -> N7000-STABLEv1.zip (Lightning Rom Android 4.4.2 ROM )
Please excuse my basic questions - I just realize I may not allow myself further mistakes. Certainly did not mean to offend or irritate anybody here.
Regards,
R.
raphele said:
I appreciate your help.
Following your advice I found this resource:
-> [KERNEL][AOSP][10 Dec.] Raw Kernel r5 -- simple&fast kernel -- some KitKat love
but I can see:
Download :
r5 for KK4.4 (announce)
r4 for JB4.3 (announce)
Just would like to make sure that r4 - not r5 - fits my needs towards KitKat.
Suppose r4, then please assure me that my plan is correct:
1. Download raw_kernel_r4_j43.zip
2. On N7000 VolUp+Home+Pwr -> Install Zip -> Choose zip from sdcard -> raw_kernel_r4_j43.zip
3. Advanced -> Reboot Recovery
4. -> Install Zip -> Choose zip from sdcard -> N7000-STABLEv1.zip (Lightning Rom Android 4.4.2 ROM )
Please excuse my basic questions - I just realize I may not allow myself further mistakes. Certainly did not mean to offend or irritate anybody here.
Regards,
R.
Click to expand...
Click to collapse
You may download either r4 or r5,r4 is cwm and r5is twrp. I would suggest to go with r4 and then flash r4 first, reboot recovery, do the wipes and then flash rom with gapps (or without) and superSU.
Sent from my GT-N7000 using Tapatalk
Try Forest kernel
Nic2215 said:
Simple download the latest philz touch, flash it with recovery reboot your recovery and flash the rom u desired. Your recovery is outdated hence status seven error
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try to flash forest kernal first then reboot recovery then flash the zip
AA1973 said:
You must have CWM 6.0.<b>4.4</b> or higher, which is fully SELinux compatible for KitKat.<br />
Just flash Raw kernel r4, reboot in recovery (of raw kernel ) and then do your flash and wipes.<br />
You can't simply install a newer recovery on our device, as kernel and recovery are bound together, but ...THIS IS BASIC KNOWLEDGE FOR OUR DEVICE!!! <br />
#failĀ²<br/>
Click to expand...
Click to collapse
do we need to make partition on sd card for flashing KK cusrom?
cause i got problem with this, my storage can not read in file manager after flash CarbonRom
hi i dont know english so much.I download cm 12.1 a mean cyanogenmod 5.1.1
I open recovery mod and i select file.Im waiting uploading and its crashed thats error:
warning: no file_contextsdetected filesystem ext4 for /dev/block/mmcblk0p22
Can't install this package on top of incompatible data. Please try another package or run a factory reset
E:Error in /sdcard/cm12.11_golden.nova.20160615.zip
(Status 7)
Installation aborted.
please help me
my phone is s3 mini i8190
socialfox said:
hi i dont know english so much.i download cm 12.1 a mean cyanogenmod 5.1.1
i open recovery mod and i select file.im waiting uploading and its crashed thats error:
Warning: No file_contextsdetected filesystem ext4 for /dev/block/mmcblk0p22
can't install this package on top of incompatible data. Please try another package or run a factory reset
e:error in /sdcard/cm12.11_golden.nova.20160615.zip
(status 7)
installation aborted.
Please help me
my phone is s3 mini i8190
Click to expand...
Click to collapse
i need help !!
SocialFox said:
i need help !!
Click to expand...
Click to collapse
Try doing a normal wipe
Sent by a Cool Guy using XDA-Developers mobile app
[/COLOR]
SocialFox said:
hi i dont know english so much.I download cm 12.1 a mean cyanogenmod 5.1.1
I open recovery mod and i select file.Im waiting uploading and its crashed thats error:
warning: no file_contextsdetected filesystem ext4 for /dev/block/mmcblk0p22
Can't install this package on top of incompatible data. Please try another package or run a factory reset
E:Error in /sdcard/cm12.11_golden.nova.20160615.zip
(Status 7)
Installation aborted.
please help me
my phone is s3 mini i8190
Click to expand...
Click to collapse
Make sure that your phone has a recovery which is compatible with the version of Android you are trying to install. I had a similar issue with TWRP when installing CM12.1. My version was too old and it kept giving me an installation error when I tried to install the zip file. Updating your recovery might help.
Just my thoughts on the subject.
Good luck