Hi, Im trying to install PA but I get an errormessage saying :
Installing update...
set_perm: some changes failed
E:Error in mnt/sdcard/bluetooth/pa_galaxysmtd-1.99_13august2012.zip
(status 7)
Installation aborted
Im running 2.3.6 with latest SpeedMod.
I cleared cache and did factory reset.
Any advice ?
Wich recovery do you use?
I think stock (background is android out a box)
If so:
Download: http://www.mediafire.com/?6qtveztq9997b6n
Put on SD and install it. Reboot phone and then you can install any rom u want!
i have the same error with cwm 6.0.1.0
gonna try this recovery
I've got an i9000, and I've followed the instructions on the site..
Enter CWN
Wipe data
Format /system
Then mounted /system.
Then install the zip and get this error:
"E:Error in /sdcard/Slim-I9000-2.8.0-OFFICIAL.zip"
"(Status 7)"
"Installation aborted."
"Can't mount /emmc/"
I took out my removable sdcard before doing the install so that accounts for the last message.
I had this problem with 2.7 as well.
I'm not sure what I'm doing wrong. Someone wrote something about installing 2.6 first after doing the data wipe and system format since it reconfigures the directory structure. Not sure if this is true. Any help?
i've got the same problem. i mounted system,SD data but i received the error status 7 and an error on file install.sh. now i search possibile solutions
ulisse83 said:
i've got the sale problemi. i mounted system,SD band data bit i received the error status 7 and an error on file install.sh. now i search possibile solutions
Click to expand...
Click to collapse
I did have luck installing the SlimBean 2.6.0 zip file first, then the gapps.zip. Then upgraded to 2.7.0 doing a cache and dalvik cache wipe. No problems... but still can't seem to get 2.8.0 to work. Though 2.7.0 works quite nicely it seems.
I think there's an update app that is supposed to let you do it from the phone itself, but I'm not sure if that's working properly yet.
yes, i have no problems on old version. Now i'm writing through my galaxy s with cyanogenmod 10 and i want to try again slim ROM.
Had the same problem, it was working with 2.7 just fine, tried to update to 2.8 and it didn't work, read there that updating semaphore kernel would work.
Installed semaphore kernel 2.4.4s (via heimdall) and got bootloop.
Tried to flash stock (xxjvu) via heimdall; everything went smoot but
100%
PARAM upload successful
Ending session...
Rebooting device...
Re-attaching kernel driver...
phone never booted, now I can't get to download or recovery mode, phone just stays off, no lights, nothing, I think is bricked.
Just ordered a usb jig via amazon LOL
If you came from another rom then slim 2.6 or 2.7 you have to flash 3 times
Sent from my GT-I9000 using Tapatalk 2
i flashed again the slim bean 2.8.0 for my i9000. I come back from cm10 thus i did wipe data/factory and format system. I mounted the system partition but i have got the same story. Error status 7......problem with install.sh and all aborted.
Is this a problem with the partition layout of cm10 after the cm nightly available from 26 september?
How can i install the slim bean 2.8.0 on my galaxy s?
edit: i can't install slim 2.8.0
Installing update...
assert failed: run_program("/tmp/updater.sh") == 0
Error in /emmc/SlimBean2.7.0/Slim-i9000-2.7.0-OFFICIAL.zip
(Status 7)
Installation aborted
How to install Slim 2.8
Yes! that error is a normal step of the installation!
When you install the zip of 2.8, you get the error. Then install it again and you will reboot. Power off your phone and restart CWM, then install again the zip! after this, you can install the extras!
If you are coming from any rom apart from slim bean 2.6 and 2.7 you will need to flash it 3 times although I think the advice is to flash 2.6 and then flash 2.8 rather than flashing 2.8 directly. I am currently on 2.5 and I'll updated to 2.8 on saturday but will do it step by step 2.6 > 2.8.
dotanby said:
If you came from another rom then slim 2.6 or 2.7 you have to flash 3 times
Click to expand...
Click to collapse
What's not clear to me is when they say flash 3 times, do they mean just try installing the 2.8.0 zip 3 times? Or do a wipe cache/dalvik cache between each try? Or reboot between tries?
I've got 2.7.0 running fine but it gives me an error on the 2.8.0 flash even if I try 5 times, and that's trying both with and without cache wipes between attempts.
I went from CM10 to slim bean 2.8. All I did was factory reset, wipe + cache and dalvik cache (I didn't mount system or anything like that).
ROM installed normally, no errors and no reboots. Been using it fine for the last few hours now.
Sent from my GT-I9000 using xda premium
I solved the issue in this way. we assume that it is correct to try mountind the system partition but if the error continues then it isn't the solution!
The slim bean team, cunningly, modified the file "Slim-I9000-2.8.0-OFFICIAL.zip"! they changed at 2012-10-25 00:07:28 thus, all those who download the file yesterday, they have the error status 7 etc...
You redownload the slim rom and then to follow the standard procedure:
- enter in recovery
- wipe data/factory
- format system (in mount and storage menu)
- install zip from sd (or external) card
- install slim gapps
- install optional gapps
- enjoy
ulisse83 said:
I solved the issue in this way. we assume that it is correct to try mountind the system partition but if the error continues then it isn't the solution!
The slim bean team, cunningly, ha modificato il file "Slim-I9000-2.8.0-OFFICIAL.zip"! they changed at 2012-10-25 00:07:28 thus, all those who download the file yesterday, they have the error status 7 etc...
You redownload the slim rom and then to follow the standard procedure:
Click to expand...
Click to collapse
You are correct. Just re-downloaded the 2.8.0 zip, SREC update and Gapps update files and everything installed nicely over 2.7.0 with just a cache/dalvik cache wipe.
Nice!
very good. i like very much this ROM. fast and with many RAM.392 mb ! it already includes the semaphore kernel 2.4.4s.excellent.
Back to stokc > Cm10 > Slimbean 2.7 > Slimbean 2.8
Hello, I have problems installing Xposed on my Samsung Galaxy Tab 2 7.0, Android versión 4.0.3 unrooted with cwm Philz Touch 6 versión 6.0.4.6.
I have tried installing it in the classical way and it says the latest version of xposed is currently not active.
I have tried installing it in the Recovery Automatically and it keep saying the latest version of xposed is currently not active, I managed to make that message dissapear if I make a soft reboot antes installing but antes I reboot normally it goles back to the same message.
And when installing in Recovery Manually it brings an error, it says:
In recovery Mode
Did not find /data/data/de. robv.android.Xposed.installer/bin/app_process
Pleas make sure to press install / update in the xposed installer app before flashing this zip.
E: Error in
data/media/files/Xposed-Installer-Recovery
(Status 1)
Installation aborted .
I would appreciate any help since I am new to the forum and if I posted in the wrong section please move it dont delete it.
i have the same problem trying to install Xposed on my Samsung Galaxy S2 4G (GT-i9210T) Android 4.0.4 ROOTED
1) installing using CLASSICAL - starts install/update then crashes
2) installing using RECOVERY (flash zip automatically) - starts install/update then says...
-copying Xposed-Disabler-Recovery.zip...
-copying Xposed-Installer-Recovery.zip...
-Could not copy Xposed-Installer-Recovery.zip to /cache
3)installing using RECOVERY (write zip to SD card, flash manually) - it starts install/update. Tells me to boot to recovery mode.
When entering recovery mode, It cant find the xposed files to extract and install in the SD card.
Anyone that can help would be greatly appreciated. thanks
Have you checked the FAQ? If that doesn't help, please post a logcat.
GermainZ said:
Have you checked the FAQ? If that doesn't help, please post a logcat.
Click to expand...
Click to collapse
thanks germainZ
i shouldve read the FAQ first. (im a noob)
I installed XposedInstallerStaticBusyBox_v1.apk in my phone then i successfully installed the new framework! AMAZING. :good:
If you didnt tell me to read the FAQ page, i wouldnt have know. UR THE MAN! thank you so much GermainZ
Hi, i have a problem upgrading from CM 11-20140216-UNOFFICIAL-dev_connection_team-ariesve (4.4.2 I9001XXKF8)
to CM11 (4.4.4) on my Samsung Galaxy S plus
http://forum.xda-developers.com/showthread.php?t=2579431
The problem is, that my existing CWM 6.0.3.5 refuses to update
to the required 6.0.4.9. I created a copy of these files on my phones internal
memory listed in the thread for latest CWM and TWRP. Checksums are ok.
Then i booted into CWM recovery -> install zip -> choose zip from sdcard -> and so on
But it quits installation with this error message:
Code:
Can't open /sdcard/blablabla.zip (bad)
The path is existing and so are the files. The displayed path is ok.
Does anyone know what to do? The last updates just went fine,
except my previous custom recovery was replaced by CWM when upgrading from CM9 to 10.
I think it was TWRP before, but i am not really sure. When it is possible i would like to replace CWM with TWRP again.
Bitmuncher said:
Hi, i have a problem upgrading from CM 11-20140216-UNOFFICIAL-dev_connection_team-ariesve (4.4.2 I9001XXKF8)
to CM11 (4.4.4) on my Samsung Galaxy S plus
http://forum.xda-developers.com/showthread.php?t=2579431
The problem is, that my existing CWM 6.0.3.5 refuses to update
to the required 6.0.4.9. I created a copy of these files on my phones internal
memory listed in the thread for latest CWM and TWRP. Checksums are ok.
Then i booted into CWM recovery -> install zip -> choose zip from sdcard -> and so on
But it quits installation with this error message:
Code:
Can't open /sdcard/blablabla.zip (bad)
The path is existing and so are the files. The displayed path is ok.
Does anyone know what to do? The last updates just went fine,
except my previous custom recovery was replaced by CWM when upgrading from CM9 to 10.
I think it was TWRP before, but i am not really sure. When it is possible i would like to replace CWM with TWRP again.
Click to expand...
Click to collapse
I had the same problem a couple of times before. I found out that zip file was corrupt, hence the Can't open .zip (bad) error.
EDIT:
Thread can be closed. Problem solved. I thougt that my phone is "supported" and the version 7.8 is the latest (d2lte). However d2lte is similar phone, and Slimkat for i9305 is ported (but very well ported). I wanted to install ROM for different phone.
--------------------------------------------------------------------------
Hello,
I wanted to update my Slimkat ROM 7.2.1 to newer version because I was little confused by little bugs (ROM is very stable and great) and most of all "not translated everything" to my language.
I downloaded latest version for my i9305 (d2lte=i3905 at the slimkat website) and put into sd card, then run CWM Recovery, did wipe data/factory reset and wipe cache partition. Then I wanted to install Slimkat but after "Mounting" I got error (without any specific name) and I couldn't update. I tried several times, I formatted later also dalvik cache and /system, tried with 7.4 and 7.6 versions but still I'm getting the same problem. I did everything also with "installation FAQ" at slimkat website. I can only install 7.2.1 How can I install newer versions?
EDIT: I tried to change ROM to Stock (4.3 downloaded via sammobile), next install again CWM and Slimkat 7.8 but.... the same error.
I'm getting:
"-- Installing: /storage/sdcard1/Slim-d2lte-4.4.4.build.7.8-WEEKLY-6269.zip
Finding update package...
Opening udpdate package...
Installing update...
<here is ASCII slimkat logo>
Format and Mount Systen. Mount Data...
E: Error in /storage/sdcard1/Slim-d2lte-4.4.4.build.7.8-WEEKLY-6269.zip
(Status 0)
Installation aborted."
And thanks all.