EDIT [solved]. Slimkat - updating ROM - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

EDIT:
Thread can be closed. Problem solved. I thougt that my phone is "supported" and the version 7.8 is the latest (d2lte). However d2lte is similar phone, and Slimkat for i9305 is ported (but very well ported). I wanted to install ROM for different phone.
--------------------------------------------------------------------------
Hello,
I wanted to update my Slimkat ROM 7.2.1 to newer version because I was little confused by little bugs (ROM is very stable and great) and most of all "not translated everything" to my language.
I downloaded latest version for my i9305 (d2lte=i3905 at the slimkat website) and put into sd card, then run CWM Recovery, did wipe data/factory reset and wipe cache partition. Then I wanted to install Slimkat but after "Mounting" I got error (without any specific name) and I couldn't update. I tried several times, I formatted later also dalvik cache and /system, tried with 7.4 and 7.6 versions but still I'm getting the same problem. I did everything also with "installation FAQ" at slimkat website. I can only install 7.2.1 How can I install newer versions?
EDIT: I tried to change ROM to Stock (4.3 downloaded via sammobile), next install again CWM and Slimkat 7.8 but.... the same error.
I'm getting:
"-- Installing: /storage/sdcard1/Slim-d2lte-4.4.4.build.7.8-WEEKLY-6269.zip
Finding update package...
Opening udpdate package...
Installing update...
<here is ASCII slimkat logo>
Format and Mount Systen. Mount Data...
E: Error in /storage/sdcard1/Slim-d2lte-4.4.4.build.7.8-WEEKLY-6269.zip
(Status 0)
Installation aborted."
And thanks all.

Related

[Q] assert failed: is_mounted("/data")

Hi all,
I'm flashing my LG 2x first time.
I rooted my phone, installed clockworkmod, started clockworkmod and cleared the data and factory settings.
When i try to flash Nova HD Plus rom, it opens aroma and during it starts to install i get these message..
Mount Partition:
Mount /system
Mount /data
assert failed: is_mounted("/data")
but it says, its successfully installed Nova HD Plus.
on Installation completed window,
Congratulation...
Nova HD Plus has been installed into your device.
Installer Status: 7
But the rom is not getting installed.
Please help.
Thanks
have you cleared the dalvick cache??
+1
Exactly the same here; coming from Modaco GR6. Wiped everything including Dalvic cache. It goes through Aroma ok and sets up the install, then bombs out with assert failed: is_mounted("/data"). It says it's successful (but it's instantaneous so obviously didn't). When reboot still in GR6.
solved it..
I had the old version of clockworkmod..
After updating to 5.0, the installation went fine.
http://forum.xda-developers.com/showthread.php?t=1098745
neilperks, you can try the same.
All the best!
I solved the problem by flashing the back2ext3-o2x.zip. The installation went fine after that.

Install Paranoid Android from 2.3.6

Hi, Im trying to install PA but I get an errormessage saying :
Installing update...
set_perm: some changes failed
E:Error in mnt/sdcard/bluetooth/pa_galaxysmtd-1.99_13august2012.zip
(status 7)
Installation aborted
Im running 2.3.6 with latest SpeedMod.
I cleared cache and did factory reset.
Any advice ?
Wich recovery do you use?
I think stock (background is android out a box)
If so:
Download: http://www.mediafire.com/?6qtveztq9997b6n
Put on SD and install it. Reboot phone and then you can install any rom u want!
i have the same error with cwm 6.0.1.0
gonna try this recovery

[Q] Slim Bean 2.8 Install Troubles...

I've got an i9000, and I've followed the instructions on the site..
Enter CWN
Wipe data
Format /system
Then mounted /system.
Then install the zip and get this error:
"E:Error in /sdcard/Slim-I9000-2.8.0-OFFICIAL.zip"
"(Status 7)"
"Installation aborted."
"Can't mount /emmc/"
I took out my removable sdcard before doing the install so that accounts for the last message.
I had this problem with 2.7 as well.
I'm not sure what I'm doing wrong. Someone wrote something about installing 2.6 first after doing the data wipe and system format since it reconfigures the directory structure. Not sure if this is true. Any help?
i've got the same problem. i mounted system,SD data but i received the error status 7 and an error on file install.sh. now i search possibile solutions
ulisse83 said:
i've got the sale problemi. i mounted system,SD band data bit i received the error status 7 and an error on file install.sh. now i search possibile solutions
Click to expand...
Click to collapse
I did have luck installing the SlimBean 2.6.0 zip file first, then the gapps.zip. Then upgraded to 2.7.0 doing a cache and dalvik cache wipe. No problems... but still can't seem to get 2.8.0 to work. Though 2.7.0 works quite nicely it seems.
I think there's an update app that is supposed to let you do it from the phone itself, but I'm not sure if that's working properly yet.
yes, i have no problems on old version. Now i'm writing through my galaxy s with cyanogenmod 10 and i want to try again slim ROM.
Had the same problem, it was working with 2.7 just fine, tried to update to 2.8 and it didn't work, read there that updating semaphore kernel would work.
Installed semaphore kernel 2.4.4s (via heimdall) and got bootloop.
Tried to flash stock (xxjvu) via heimdall; everything went smoot but
100%
PARAM upload successful
Ending session...
Rebooting device...
Re-attaching kernel driver...
phone never booted, now I can't get to download or recovery mode, phone just stays off, no lights, nothing, I think is bricked.
Just ordered a usb jig via amazon LOL
If you came from another rom then slim 2.6 or 2.7 you have to flash 3 times
Sent from my GT-I9000 using Tapatalk 2
i flashed again the slim bean 2.8.0 for my i9000. I come back from cm10 thus i did wipe data/factory and format system. I mounted the system partition but i have got the same story. Error status 7......problem with install.sh and all aborted.
Is this a problem with the partition layout of cm10 after the cm nightly available from 26 september?
How can i install the slim bean 2.8.0 on my galaxy s?
edit: i can't install slim 2.8.0
Installing update...
assert failed: run_program("/tmp/updater.sh") == 0
Error in /emmc/SlimBean2.7.0/Slim-i9000-2.7.0-OFFICIAL.zip
(Status 7)
Installation aborted
How to install Slim 2.8
Yes! that error is a normal step of the installation!
When you install the zip of 2.8, you get the error. Then install it again and you will reboot. Power off your phone and restart CWM, then install again the zip! after this, you can install the extras!
If you are coming from any rom apart from slim bean 2.6 and 2.7 you will need to flash it 3 times although I think the advice is to flash 2.6 and then flash 2.8 rather than flashing 2.8 directly. I am currently on 2.5 and I'll updated to 2.8 on saturday but will do it step by step 2.6 > 2.8.
dotanby said:
If you came from another rom then slim 2.6 or 2.7 you have to flash 3 times
Click to expand...
Click to collapse
What's not clear to me is when they say flash 3 times, do they mean just try installing the 2.8.0 zip 3 times? Or do a wipe cache/dalvik cache between each try? Or reboot between tries?
I've got 2.7.0 running fine but it gives me an error on the 2.8.0 flash even if I try 5 times, and that's trying both with and without cache wipes between attempts.
I went from CM10 to slim bean 2.8. All I did was factory reset, wipe + cache and dalvik cache (I didn't mount system or anything like that).
ROM installed normally, no errors and no reboots. Been using it fine for the last few hours now.
Sent from my GT-I9000 using xda premium
I solved the issue in this way. we assume that it is correct to try mountind the system partition but if the error continues then it isn't the solution!
The slim bean team, cunningly, modified the file "Slim-I9000-2.8.0-OFFICIAL.zip"! they changed at 2012-10-25 00:07:28 thus, all those who download the file yesterday, they have the error status 7 etc...
You redownload the slim rom and then to follow the standard procedure:
- enter in recovery
- wipe data/factory
- format system (in mount and storage menu)
- install zip from sd (or external) card
- install slim gapps
- install optional gapps
- enjoy
ulisse83 said:
I solved the issue in this way. we assume that it is correct to try mountind the system partition but if the error continues then it isn't the solution!
The slim bean team, cunningly, ha modificato il file "Slim-I9000-2.8.0-OFFICIAL.zip"! they changed at 2012-10-25 00:07:28 thus, all those who download the file yesterday, they have the error status 7 etc...
You redownload the slim rom and then to follow the standard procedure:
Click to expand...
Click to collapse
You are correct. Just re-downloaded the 2.8.0 zip, SREC update and Gapps update files and everything installed nicely over 2.7.0 with just a cache/dalvik cache wipe.
Nice!
very good. i like very much this ROM. fast and with many RAM.392 mb ! it already includes the semaphore kernel 2.4.4s.excellent.
Back to stokc > Cm10 > Slimbean 2.7 > Slimbean 2.8

[Q] GT-S5830 - Error in /tmp/sideload/... (status 0)

Hello
I tried to install different Rom from different sites but every time I apply the update from the Recovery menu, the installation hangs for error Error in / tmp / sideload / ... (status 0)
I also tried to format the SD card but the error persists ... I also installed cwm ...
I seem to have tried one of these 2 ROM:
...needrom.com/mobile/galaxy-ace-s5830
...needrom.com/mobile/s5830-galaxy-ace
Currently there is Android 2.3.6 and if I install updates, the cel says it is updated
you must install cwm and then at cwm install zip from sdcard and not aplly update
tethering
graineeg said:
you must install cwm and then at cwm install zip from sdcard and not aplly update
Click to expand...
Click to collapse
Now it's works: Now there's cyanogenmod (ANDROID 4.2.1).
The only thing that doesn't works is tethering (and wifi hotspot).
I have vodafone...
Thanks
Stefano

HEEEEELP.

I download this roms
-Resurrection Remix V.5.4.4
And also download this.
V.5.7 Remix -Resurrection
Download the gapps and did the normal procedure for installation.
what happens is that after attempting to install the ROM. I get this error.
(Enclose all text that I no longer like spending a capture)
Installing: Storage - sd card1-Resurrecction Remix_Lp_v.5.4.4
finding update package
opening update
installing Update
Detected Fylesystem ext4 for /Dev/block/plataform/msm_sdcc.l/by-name/system
mount: Failed to mount /dev/block/plataform/msm_sdcc.l/by-name/system at / system: Invalid argument
unmouunt of / system failed: no such volume
patching system unconditionally
E: error in /storage/sdcard1/REsurrectionRemix_Lp_v5.4.4-20150511
(Status 0)
instalation aborted
This is me 2 rom mentioned.
after that the micro sd is disabled and must be reintroduced to recognize it the team
Try installing the ROM CM By beto, and is not installed not simply do nothing and pass the phone around two hours in the instalalcion and never proceeded
Now my phone does not pass the logo of motorola
help-'
Did you perform a „factory reset” wipe? Changing ROMs kind of requires you to - a factory reset wipes the old sd-ext, and you still have it.
And are you sure you downloaded the right ROM? I can't access the RR site now, but they don't have ROMs for Thea.
What phone do you have, actually?
FCorvin said:
Did you perform a „factory reset” wipe? Changing ROMs kind of requires you to - a factory reset wipes the old sd-ext, and you still have it.
And are you sure you downloaded the right ROM? I can't access the RR site now, but they don't have ROMs for Thea.
What phone do you have, actually?
Click to expand...
Click to collapse
I have xt1045 4g
I've done all the procedures to install the rom .
but gave those mistakes.
try putting on a rom 5.1 stock xt1045 according to what I found here on xda but I do not install it .
the phone did not stay at the logo and not as most do.
Then you need to flash this ROM: CM Peregrine
Or this one: RR Peregrine
See the ROM's discussion thread here.
You are also on the wrong part of this forum - you'll get better advice here: Moto G

Categories

Resources