Database Develop

[Q] KitKat Firmware Upgrade and S-ON

Hi there,
I´ve got a problem/question about the firmware upgrade to the newest 4.06.1540.3 one. My device is S-On and on 3.62.401.1 at the moment. As written in most guides, you need to s-off your device to flash a new firmware, but my last firmware-upgrade to 3.62.401.1 worked on s-on, when i followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2182823 (you should relock bootloader and then flash firmware.zip) I first tried to flash the 4.06.1540.3.zip like on s-off following Vomer´s guide [ http://forum.xda-developers.com/showthread.php?t=2365506 ], from which i also downloaded that custom zip ( http://d-h.st/Uz6 ). But during both flashing"kinds" (S-on and s-off style), i got the same error in cmd:
C:\HTCONE\Toolkit 2.0 - Squabbi>fastboot flash zip firmware.zip
target reported max download size of 1526722560 bytes
sending 'zip' (28021 KB)...
OKAY [ 2.740s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 6.255s
Click to expand...
Click to collapse
So is there a way, maybe to modify that firmware to work on s-on, or is such a zip downloadable ? or do i have to switch to s-off to upgrade to the new kitkat firmware ??? THX in advance
P.s.:
C:\HTCONE\Toolkit 2.0 - Squabbi>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.069s
Click to expand...
Click to collapse
I locked my bootloader, that´s the status quo.... please help! :good: :good:

Hans_Schlila said:
Hi there,
I´ve got a problem/question about the firmware upgrade to the newest 4.06.1540.3 one. My device is S-On and on 3.62.401.1 at the moment. As written in most guides, you need to s-off your device to flash a new firmware, but my last firmware-upgrade to 3.62.401.1 worked on s-on, when i followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2182823 (you should relock bootloader and then flash firmware.zip) I first tried to flash the 4.06.1540.3.zip like on s-off following Vomer´s guide [ http://forum.xda-developers.com/showthread.php?t=2365506 ], from which i also downloaded that custom zip ( http://d-h.st/Uz6 ). But during both flashing"kinds" (S-on and s-off style), i got the same error in cmd:
So is there a way, maybe to modify that firmware to work on s-on, or is such a zip downloadable ? or do i have to switch to s-off to upgrade to the new kitkat firmware ??? THX in advance
P.s.:
I locked my bootloader, that´s the status quo.... please help! :good: :good:
Click to expand...
Click to collapse
just use rumrunner to s-off then flash any firmware you like
the error was because your CID and MID do not match those in the firmware
you should also edit your post and remove your serial no and IEMI
You should also make note that once your phone is s-off it will be possible to Brick the phone if you don't flash correctly. Be sure to follow any guides you use Exactly as they say. And be sure the file you flash is for your phone. It's also highly recommended to keep s-off once you have it never go s-on

clsA said:
just use rumrunner to s-off then flash any firmware you like
the error was because your CID and MID do not match those in the firmware
you should also edit your post and remove your serial no and IEMI
Click to expand...
Click to collapse
Thank you VERY much, for quick reply, i´ll do that...

Hans_Schlila said:
Thank you VERY much, for quick reply, i´ll do that...
Click to expand...
Click to collapse
your welcome .. I also added more to my post above your's

clsA said:
You should also make note that once your phone is s-off it will be possible to Brick the phone if you don't flash correctly. Be sure to follow any guides you use Exactly as they say. And be sure the file you flash is for your phone. It's also highly recommended to keep s-off once you have it never go s-on
Click to expand...
Click to collapse
So when i have gone s-off, there is no way back to s-on in case of warranty purposes, e.g. to run an ruu.exe?

Hans_Schlila said:
So when i have gone s-off, there is no way back to s-on in case of warranty purposes, e.g. to run an ruu.exe?
Click to expand...
Click to collapse
yes you can but it's not recommended and RUU works great with s-off

clsA said:
yes you can but it's not recommended and RUU works great with s-off
Click to expand...
Click to collapse
Not recommended because of brick risk?

Hans_Schlila said:
Not recommended because of brick risk?
Click to expand...
Click to collapse
s-on a phone with modified hboot = brick
You can s-on after running a RUU without risk.
Other than that the dangers of s-on are only it can be difficult to get s-off back. You only need to search the forums for all the bonuses of having s-off.

[Q] Failed stock rom update now boot loop?

Hello,
i think i have a big problem. After the One of my brother did a provider update, it froze in the update process and it boot loops. I can access it via fastboot but not with adb. But with another One adb is no problem, that confuses me quite a bit.
I unlocked it with htcdev and installed twrp 2.7.0.0.
version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno: 11111111111111
imei: 1111111111111111
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__102
battery-status: good
battery-voltage: 3962mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
I tried the following RUU locked and relocked:
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe
But it failed with Error code 155. I really don't know what to do now.

dre-z said:
Hello,
i think i have a big problem. After the One of my brother did a provider update, it froze in the update process and it boot loops. I can access it via fastboot but not with adb. But with another One adb is no problem, that confuses me quite a bit.
I unlocked it with htcdev and installed twrp 2.7.0.0.
version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno: 11111111111111
imei: 1111111111111111
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__102
battery-status: good
battery-voltage: 3962mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
I tried the following RUU locked and relocked:
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe
But it failed with Error code 155. I really don't know what to do now.
Click to expand...
Click to collapse
Ahh, that RUU will not work because its for an older HBOOT version. That's for HBOOT 1.44, yours is on 1.55
So, u cannot use that RUU.
U will need to update the HBOOT to 1.56 and use this RUU:
http://www.htc1guru.com/2014/03/android-ruu-europe/
Plus, lock the bootloader before using the RUU. RUU will give an error if u have an unlocked bootloader

raghav kapur said:
Ahh, that RUU will not work because its for an older HBOOT version. That's for HBOOT 1.44, yours is on 1.55
So, u cannot use that RUU.
U will need to update the HBOOT to 1.56 and use this RUU:
http://www.htc1guru.com/2014/03/android-ruu-europe/
Plus, lock the bootloader before using the RUU. RUU will give an error if u have an unlocked bootloader
Click to expand...
Click to collapse
:good:

But i can't flash the hboot 1.56 without S-off, can't i? Adb is also not working :\
Everytime i try to flash the hboot i get:
C:\adb>fastboot flash zip firmware.zip
target reported max download size of 1526722560 bytes
sending 'zip' (24681 KB)...
OKAY [ 2.310s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 2.574s

dre-z said:
But i can't flash the hboot 1.56 without S-off, can't i? Adb is also not working :\
Everytime i try to flash the hboot i get:
C:\adb>fastboot flash zip firmware.zip
target reported max download size of 1526722560 bytes
sending 'zip' (24681 KB)...
OKAY [ 2.310s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 2.574s
Click to expand...
Click to collapse
I think ur flashing the wrong firmware. As far as im aware, HBOOT upgrade is possible S-ON, but downgrade requires S-OFF. Give me the link to the firmware ur flashing

raghav kapur said:
I think ur flashing the wrong firmware. As far as im aware, HBOOT upgrade is possible S-ON, but downgrade requires S-OFF. Give me the link to the firmware ur flashing
Click to expand...
Click to collapse
https://mega.co.nz/#!e5pkBDpL!KM_H4wmVCJTCB6XlTLxG5SxyfgoIhnH_ne0fAHdGPM4
Hboot 1.56 Base 4.06
Does it matter if my Bootloader is locked/unlocked when i flash the hboot?

dre-z said:
https://mega.co.nz/#!e5pkBDpL!KM_H4wmVCJTCB6XlTLxG5SxyfgoIhnH_ne0fAHdGPM4
Hboot 1.56 Base 4.06
Does it matter if my Bootloader is locked/unlocked when i flash the hboot?
Click to expand...
Click to collapse
You've flashed the wrong firmware.
http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One/401/
Choose 4.19.401.9
Unlock your bootloader and then flash this firmware

the exe form of ruu in htc1guru.com is corrupt, i checked md8 signatures. but zip form is ok.

hboot is now working with locked bootloader, i will try RUU later. Thanks to all of you to this point!!!
I can't download the ruu, the download speed is so worse, it takes 6 hours and cancles at 100-150mb -.- was googling for another mirror, but didn't find one yet

The phone is working again, you're the best, all of u!!! Big thanks again!!!!!!!

One "this is a test device" help - urgent

Hi guys,
I'm in need of some help, my beloved HTC One has fallen victim to the dreaded Purple Camera issue and I need to send it back.
I'm on HBOOT 1.56 and I need to turn S-ON back on as my phone says that my phone is a "Test Device" in bold red writing if you reset the phone and under About>Help
I don't want any warranty issues with HTC as being in South Africa, support is very limited as it is and they will find any excuse not to try fix it.
If anyone can give out any tips or advice I'd be happy to donate even.
I've done lots of Googling and tried a couple things but it's all for older HBOOT's than mine.
Please and thanks guys. :good:

Terros said:
Hi guys,
I'm in need of some help, my beloved HTC One has fallen victim to the dreaded Purple Camera issue and I need to send it back.
I'm on HBOOT 1.56 and I need to turn S-ON back on as my phone says that my phone is a "Test Device" in bold red writing if you reset the phone and under About>Help
I don't want any warranty issues with HTC as being in South Africa, support is very limited as it is and they will find any excuse not to try fix it.
If anyone can give out any tips or advice I'd be happy to donate even.
I've done lots of Googling and tried a couple things but it's all for older HBOOT's than mine.
Please and thanks guys. :good:
Click to expand...
Click to collapse
First, post the output of ''fastboot getvar all'' (except imei and serialno)
Do NOT S-ON for the moment.

alray said:
First, post the output of ''fastboot getvar all'' (except imei and serialno)
Do NOT S-ON for the moment.
Click to expand...
Click to collapse
Thanks for the speedy response!
This is the getvar info:
D:\htcone\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 4323mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s

Terros said:
Thanks for the speedy response!
This is the getvar info:
D:\htcone\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 4323mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
Click to expand...
Click to collapse
ok so you'll need to downgrade your phone first because turning back s-on on hboot 1.56 will trigger the tampered flag in the bootloader.
use the 1.28.401.7 ruu with the guru bootloader reset tool
refer to this guide and follow instructions carefully. Again, do not s-on on hboot 1.55 and above, only do it on 1.44 or 1.54.

alray said:
First, post the output of ''fastboot getvar all'' (except imei and serialno)
Do NOT S-ON for the moment.
Click to expand...
Click to collapse
alray said:
ok so you'll need to downgrade your phone first because turning back s-on on hboot 1.56 will trigger the tampered flag in the bootloader.
use the 1.28.401.7 ruu with the guru bootloader reset tool
refer to this guide and follow instructions carefully. Again, do not s-on on hboot 1.55 and above, only do it on 1.44 or 1.54.
Click to expand...
Click to collapse
Awesome! I just downgraded to 1.44,
Can I go ahead now and use fastboot oem writesecureflag 3 to S-ON the device?
Just wanting to make 100% sure.

Terros said:
Awesome! I just downgraded to 1.44,
Can I go ahead now and use fastboot oem writesecureflag 3 to S-ON the device?
Just wanting to make 100% sure.
Click to expand...
Click to collapse
have you removed tampered and set the phone to locked, and flashed the 1.28.401.7 ruu?

nkk71 said:
have you removed tampered and set the phone to locked, and flashed the 1.28.401.7 ruu?
Click to expand...
Click to collapse
My phone still says Locked, I flashed the 1.28.401.12_hboot_1.44.zip
I haven't actually done the 1.28.401.7 RUU, Is that what I do after I flashed the 1.44 hboot?
My phone is on 4.4.2.

Terros said:
My phone still says Locked, I flashed the 1.28.401.12_hboot_1.44.zip
I haven't actually done the 1.28.401.7 RUU, Is that what I do after I flashed the 1.44 hboot?
My phone is on 4.4.2.
Click to expand...
Click to collapse
DO NOT GO S-ON
first run the RUU.EXE or the flash the RUU.ZIP
then we can consider s-on, with S-On you cannot downgrade!!! and you'll be majorly stuck.
let me know when you've done the ruu
PS: please follow the guide
1- remove tampered set locked
2- run / flash ruu 1.28.401.7
3- boot up once to make sure everything is OK, do NOT take OTA
4- go S-ON if you really need to
.

nkk71 said:
DO NOT GO S-ON
first run the RUU.EXE or the flash the RUU.ZIP
then we can consider s-on, with S-On you cannot downgrade!!! and you'll be majorly stuck.
let me know when you've done the ruu
PS: please follow the guide
1- remove tampered set locked
2- run / flash ruu 1.28.401.7
3- boot up once to make sure everything is OK, do NOT take OTA
4- go S-ON if you really need to
.
Click to expand...
Click to collapse
Ok thanks.
Is this the correct RUU > RUU M7 UL JB 50 HTC Europe 1.28.401.7 Radio 4A.13.3231.27 10.31.1131.05 Release 310878 Signed?

Terros said:
Ok thanks.
Is this the correct RUU > RUU M7 UL JB 50 HTC Europe 1.28.401.7 Radio 4A.13.3231.27 10.31.1131.05 Release 310878 Signed?
Click to expand...
Click to collapse
yes,
this one for RUU.EXE method: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
or this one for RUU.ZIP method: http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
remember to check MD5 on the download, to make sure it's not corrupt
.

nkk71 said:
yes,
this one for RUU.EXE method: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
or this one for RUU.ZIP method: http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
remember to check MD5 on the download, to make sure it's not corrupt
.
Click to expand...
Click to collapse
It's now updated to the RUU you listed.
What's next?

Terros said:
It's now updated to the RUU you listed.
What's next?
Click to expand...
Click to collapse
As mentioned:
1- remove tampered set locked
2- run / flash ruu 1.28.401.7
3- boot up once to make sure everything is OK, do NOT take OTA
4- go S-ON if you really need to
so if your bootloader is now:
* untampered,
* LOCKED,
* and the ruu has been successfully installed.
you can go ahead and S-On your device.
.

nkk71 said:
As mentioned:
1- remove tampered set locked
2- run / flash ruu 1.28.401.7
3- boot up once to make sure everything is OK, do NOT take OTA
4- go S-ON if you really need to
so if your bootloader is now:
* untampered,
* LOCKED,
* and the ruu has been successfully installed.
you can go ahead and S-On your device.
.
Click to expand...
Click to collapse
All still LOCKED and installed RUU. So now S-OFF with the writebootflag 3 or what ever correct.

Terros said:
All still LOCKED and installed RUU. So now S-OFF with the writebootflag 3 or what ever correct.
Click to expand...
Click to collapse
You mean S-On, right.
to go s-on: fastboot oem writesecureflag 3

[q] needed ruu file for htc one asia varient

i want ruu file for htc one m7(asia varient)
for hboot-1.57.0000
radio-4t.27.3218.14

mohanvital95 said:
i want ruu file for htc one m7(asia varient)
for hboot-1.57.0000
radio-4t.27.3218.14
Click to expand...
Click to collapse
Above info doesn't help, what is your CID, MID and OS version? S-ON/S-OFF? bootloader locked/unlocked? You will probably need s-off to use a RUU, your hboot is 1.57 so you'll need to downgrade because there is no RUU for 1.57 hboot and downgrading require s-off

alray said:
Above info doesn't help, what is your CID, MID and OS version? S-ON/S-OFF? bootloader locked/unlocked? You will probably need s-off to use a RUU, your hboot is 1.57 so you'll need to downgrade because there is no RUU for 1.57 hboot and downgrading require s-off
Click to expand...
Click to collapse
i dont know what is cid and mid
i dont have a os in it ...it shows like "os:"
i have s-on on the mobile

mohanvital95 said:
i dont know what is cid and mid
i dont have a os in it ...it shows like "os:"
i have s-on on the mobile
Click to expand...
Click to collapse
post the output of "fastboot getvar all" except your IMEI and serialno

alray said:
Above info doesn't help, what is your CID, MID and OS version? S-ON/S-OFF? bootloader locked/unlocked? You will probably need s-off to use a RUU, your hboot is 1.57 so you'll need to downgrade because there is no RUU for 1.57 hboot and downgrading require s-off
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.5
(bootloader) version-baseband: 4T.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP
(bootloader) serialno: FA36LW901951
(bootloader) imei: 354435052924677
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 3790mV
(bootloader) partition-layout: Gener
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: di
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.057s

version-main empty Cant flash the RUU file

Hello Guys
i have a problem with my
HTC One M7 AT&T
MID: PN0712000
CID: CWS__001
cant get it back to stock. showing error that it is not the right RUU file
i am trying to flash this one RUU_M7_UL_JB_50_Cingular_US_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04_release_326691_signed_2_2
plz help me.....!
And it also show version-main empty
Only showing this display
***TAMPERED***
***RELOCKED***
*** Security warning***
m7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4m.27.3218.14
OpenDSP-v32.120.274.0909
OS-

amir_khan007 said:
Hello Guys
i have a problem with my
HTC One M7 AT&T
MID: PN0712000
CID: CWS__001
cant get it back to stock. showing error that it is not the right RUU file
i am trying to flash this one RUU_M7_UL_JB_50_Cingular_US_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04_release_326691_signed_2_2
plz help me.....!
and it also show version-main empty
Only showing this display
***TAMPERED***
***RELOCKED***
*** Security warning***
m7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4m.27.3218.14
OpenDSP-v32.120.274.0909
OS-
Click to expand...
Click to collapse
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here

alray said:
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here
Click to expand...
Click to collapse
will it still flash with version-main empty?
I am a noob at these things so kindly help me!!

You could to try flash 1.44 HBOOT, then give it a try (not to try a RUU flash, but back to stock, update everything and then try to RUU if needed)

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT361W902272
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4316mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.094s
These are my Getvar all Details...

amir_khan007 said:
will it still flash with version-main empty?
Click to expand...
Click to collapse
Yes
teetx said:
You could to try flash 1.44 HBOOT, then give it a try (not to try a RUU flash, but back to stock, update everything and then try to RUU if needed)
Click to expand...
Click to collapse
You can't downgrade the hboot with S-ON and you don't want to downgrade it if flashing a 7.xx.xxx.x RUU, you need at least hboot 1.57.

alray said:
Yes
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_Radio_4M.32.3218.06_10.46.1718.01L_release_449059_signed_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
 @Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!
Click to expand...
Click to collapse

alray said:
Yes
You can't downgrade the hboot with S-ON and you don't want to downgrade it if flashing a 7.xx.xxx.x RUU, you need at least hboot 1.57.
Click to expand...
Click to collapse
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_R adio_4M.32.3218.06_10.46.1718.01L_release_449059_s igned_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
 @Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!

amir_khan007 said:
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_R adio_4M.32.3218.06_10.46.1718.01L_release_449059_s igned_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!
Click to expand...
Click to collapse
These errors don't look right at all. Did you read the "How to flash" instructions on the link @alray gave you.
Also be sure to use an admin cmd window

mb_guy said:
These errors don't look right at all. Did you read the "How to flash" instructions on the link @alray gave you.
Also be sure to use an admin cmd window
Click to expand...
Click to collapse
'How to flash' in the link is for zip RUU. my one is EXE file...!
PLZ TELL ME HOW TO GET RID OF THIS ERROR....!!

Try with another computer, looks like a Windows problem not related to the ruu itself. Do you have the latest C++ redistr installed on your computer?

alray said:
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here
Click to expand...
Click to collapse
OH MY GOODNESS
ITS DONE
ITS BACK
I CANT BELIEVE IT
@alray I dont know how to thank you. but I will pray to GOD to give you all the heavens HE made.................!!!
Amen
thanks buddy
thank you really very much....!!