Hi guys,
I'm in need of some help, my beloved HTC One has fallen victim to the dreaded Purple Camera issue and I need to send it back.
I'm on HBOOT 1.56 and I need to turn S-ON back on as my phone says that my phone is a "Test Device" in bold red writing if you reset the phone and under About>Help
I don't want any warranty issues with HTC as being in South Africa, support is very limited as it is and they will find any excuse not to try fix it.
If anyone can give out any tips or advice I'd be happy to donate even.
I've done lots of Googling and tried a couple things but it's all for older HBOOT's than mine.
Please and thanks guys. :good:
Terros said:
Hi guys,
I'm in need of some help, my beloved HTC One has fallen victim to the dreaded Purple Camera issue and I need to send it back.
I'm on HBOOT 1.56 and I need to turn S-ON back on as my phone says that my phone is a "Test Device" in bold red writing if you reset the phone and under About>Help
I don't want any warranty issues with HTC as being in South Africa, support is very limited as it is and they will find any excuse not to try fix it.
If anyone can give out any tips or advice I'd be happy to donate even.
I've done lots of Googling and tried a couple things but it's all for older HBOOT's than mine.
Please and thanks guys. :good:
Click to expand...
Click to collapse
First, post the output of ''fastboot getvar all'' (except imei and serialno)
Do NOT S-ON for the moment.
alray said:
First, post the output of ''fastboot getvar all'' (except imei and serialno)
Do NOT S-ON for the moment.
Click to expand...
Click to collapse
Thanks for the speedy response!
This is the getvar info:
D:\htcone\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 4323mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
Terros said:
Thanks for the speedy response!
This is the getvar info:
D:\htcone\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 4323mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
Click to expand...
Click to collapse
ok so you'll need to downgrade your phone first because turning back s-on on hboot 1.56 will trigger the tampered flag in the bootloader.
use the 1.28.401.7 ruu with the guru bootloader reset tool
refer to this guide and follow instructions carefully. Again, do not s-on on hboot 1.55 and above, only do it on 1.44 or 1.54.
alray said:
First, post the output of ''fastboot getvar all'' (except imei and serialno)
Do NOT S-ON for the moment.
Click to expand...
Click to collapse
alray said:
ok so you'll need to downgrade your phone first because turning back s-on on hboot 1.56 will trigger the tampered flag in the bootloader.
use the 1.28.401.7 ruu with the guru bootloader reset tool
refer to this guide and follow instructions carefully. Again, do not s-on on hboot 1.55 and above, only do it on 1.44 or 1.54.
Click to expand...
Click to collapse
Awesome! I just downgraded to 1.44,
Can I go ahead now and use fastboot oem writesecureflag 3 to S-ON the device?
Just wanting to make 100% sure.
Terros said:
Awesome! I just downgraded to 1.44,
Can I go ahead now and use fastboot oem writesecureflag 3 to S-ON the device?
Just wanting to make 100% sure.
Click to expand...
Click to collapse
have you removed tampered and set the phone to locked, and flashed the 1.28.401.7 ruu?
nkk71 said:
have you removed tampered and set the phone to locked, and flashed the 1.28.401.7 ruu?
Click to expand...
Click to collapse
My phone still says Locked, I flashed the 1.28.401.12_hboot_1.44.zip
I haven't actually done the 1.28.401.7 RUU, Is that what I do after I flashed the 1.44 hboot?
My phone is on 4.4.2.
Terros said:
My phone still says Locked, I flashed the 1.28.401.12_hboot_1.44.zip
I haven't actually done the 1.28.401.7 RUU, Is that what I do after I flashed the 1.44 hboot?
My phone is on 4.4.2.
Click to expand...
Click to collapse
DO NOT GO S-ON
first run the RUU.EXE or the flash the RUU.ZIP
then we can consider s-on, with S-On you cannot downgrade!!! and you'll be majorly stuck.
let me know when you've done the ruu
PS: please follow the guide
1- remove tampered set locked
2- run / flash ruu 1.28.401.7
3- boot up once to make sure everything is OK, do NOT take OTA
4- go S-ON if you really need to
.
nkk71 said:
DO NOT GO S-ON
first run the RUU.EXE or the flash the RUU.ZIP
then we can consider s-on, with S-On you cannot downgrade!!! and you'll be majorly stuck.
let me know when you've done the ruu
PS: please follow the guide
1- remove tampered set locked
2- run / flash ruu 1.28.401.7
3- boot up once to make sure everything is OK, do NOT take OTA
4- go S-ON if you really need to
.
Click to expand...
Click to collapse
Ok thanks.
Is this the correct RUU > RUU M7 UL JB 50 HTC Europe 1.28.401.7 Radio 4A.13.3231.27 10.31.1131.05 Release 310878 Signed?
Terros said:
Ok thanks.
Is this the correct RUU > RUU M7 UL JB 50 HTC Europe 1.28.401.7 Radio 4A.13.3231.27 10.31.1131.05 Release 310878 Signed?
Click to expand...
Click to collapse
yes,
this one for RUU.EXE method: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
or this one for RUU.ZIP method: http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
remember to check MD5 on the download, to make sure it's not corrupt
.
nkk71 said:
yes,
this one for RUU.EXE method: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
or this one for RUU.ZIP method: http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
remember to check MD5 on the download, to make sure it's not corrupt
.
Click to expand...
Click to collapse
It's now updated to the RUU you listed.
What's next?
Terros said:
It's now updated to the RUU you listed.
What's next?
Click to expand...
Click to collapse
As mentioned:
1- remove tampered set locked
2- run / flash ruu 1.28.401.7
3- boot up once to make sure everything is OK, do NOT take OTA
4- go S-ON if you really need to
so if your bootloader is now:
* untampered,
* LOCKED,
* and the ruu has been successfully installed.
you can go ahead and S-On your device.
.
nkk71 said:
As mentioned:
1- remove tampered set locked
2- run / flash ruu 1.28.401.7
3- boot up once to make sure everything is OK, do NOT take OTA
4- go S-ON if you really need to
so if your bootloader is now:
* untampered,
* LOCKED,
* and the ruu has been successfully installed.
you can go ahead and S-On your device.
.
Click to expand...
Click to collapse
All still LOCKED and installed RUU. So now S-OFF with the writebootflag 3 or what ever correct.
Terros said:
All still LOCKED and installed RUU. So now S-OFF with the writebootflag 3 or what ever correct.
Click to expand...
Click to collapse
You mean S-On, right.
to go s-on: fastboot oem writesecureflag 3
Related
Hey guys,
I have just download 1.28.401.7 RUU to flash on my htc one.
MY htc one Product code is m7_ul and cid is htc_001 and mid is PN710000.
when the ruu is flashing it shows a error and says there is a diff. bootloader version.
What am i doing wrong??
Most likely the current version of a bootloader is newer than that which contains in RUU .To you it is necessary to flash RUU under s-off.
exactly the same ,i desperately need to get back to stock to send phone away,what can we do to to rectify this please PLEASE
tash2013 said:
Most likely the current version of a bootloader is newer than that which contains in RUU .To you it is necessary to flash RUU under s-off.
Click to expand...
Click to collapse
To do S-off do we need to be rooted?
udimars30 said:
To do S-off do we need to be rooted?
Click to expand...
Click to collapse
NOT need!
this is what i get in getver
bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.61.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA33VW903941
(bootloader) imei: 354436050514510
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3964mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.691s
westentertainer said:
this is what i get in getver
bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.61.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA33VW903941
(bootloader) imei: 354436050514510
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3964mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.691s
Click to expand...
Click to collapse
You need
1) Get S-OFF
2) Change CID to unbranded one (HTC__001 for example)
3) Flash the European RUU 1.28.401.7
4) Recieve OTA to latest firmware
if you want to remain on ORANGE, it is necessary to find RUU for orange and you don't need to change CID
anyone please i need to post this phone today or at the latest this weekend,,,because i have relocked the bootloader i can not get out of fast boot screen bahhhh
tash2013 said:
NOT need!
Click to expand...
Click to collapse
i have done to 1st part of S-off but on second it is showing "the system cannot find the specific path"
any thing i'm doing wrong??
edit done and i have s-off now yay
tash2013 said:
NOT need!
Click to expand...
Click to collapse
can i flash the ruu on unlocked bootloader??
udimars30 said:
can i flash the ruu on unlocked bootloader??
Click to expand...
Click to collapse
Under s-off you can flash RUU and then receive OTA with unlocked bootloader.
When got S-ON you need relocked (locked) bootloader to receive OTA correctly.
anyone please i need to post this phone today or at the latest this weekend,,,because i have relocked the bootloader i can not get out of fast boot screen bahhhh
Click to expand...
Click to collapse
Was unlocked with HTCdev? and then relocked? just type "fastboot oem unlock"
tash2013 said:
Under s-off you can flash RUU and then receive OTA with unlocked bootloader.
When got S-ON you need relocked (locked) bootloader to receive OTA correctly.
ok i'll flash right now and then tell you
thanks btw
Click to expand...
Click to collapse
tash2013 said:
Under s-off you can flash RUU and then receive OTA with unlocked bootloader.
When got S-ON you need relocked (locked) bootloader to receive OTA correctly
One more thing, note can I change my cid and update to that version??
Sent from my Nexus 10 using Tapatalk 4 Beta
Click to expand...
Click to collapse
udimars30 said:
Under s-off you can flash RUU and then receive OTA with unlocked bootloader.
When got S-ON you need relocked (locked) bootloader to receive OTA correctly
One more thing, note can I change my cid and update to that version??
Sent from my Nexus 10 using Tapatalk 4 Beta
Click to expand...
Click to collapse
For change cid type "fastboot oem writecid XXXXXXXX"
XXXXXXXX - cid to change
You have HTC__001 CID? If yes, you don't need change cid for 1.28.401.7 RUU.
tash2013 said:
For change cid type "fastboot oem writecid XXXXXXXX"
XXXXXXXX - cid to change
You have HTC__001 CID? If yes, you don't need change cid for 1.28.401.7 RUU.
Click to expand...
Click to collapse
yes i have the same and i just want 4.2.2 so should i change my cid??
tash2013 said:
You need
1) Get S-OFF
2) Change CID to unbranded one (HTC__001 for example)
3) Flash the European RUU 1.28.401.7
4) Recieve OTA to latest firmware
if you want to remain on ORANGE, it is necessary to find RUU for orange and you don't need to change CID
Click to expand...
Click to collapse
thanks for reply
how do i get s off
when it states orange ,i actually had the phone from t mobile but unlocked it with a code that i purchased ,i am really panicking now been up all night trying to do this any help would be very appreciated
To get OTAs you will need to change your mid if your going from "Tmobile" to "Dev Edition" make sure your mid and cid matches the RUU
Sent from my HTC One using xda app-developers app
pulling my hair out now i will never ever flash a custom rom again!!!!
You should of made a stock Nandroid backup before you decided to flash roms...have a ladder before you dig a whole thats hard to get out!!
Sent from my HTC One using Xparent BlueTapatalk 2
handman29 said:
You should of made a stock Nandroid backup before you decided to flash roms...have a ladder before you dig a whole thats hard to get out!!
Sent from my HTC One using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
i did do a back up
S on
Hboot 1.55
Main version 3.62.401.1
Cid htc_001 europe
I don't care tamperd and relocked and I don't want to s off
Only I want is stock phone and ota ok
So can I simply use ruu 1.29.401.1it will lead mee to jb4.1?
And while using Mike's guide 1 method with s on am I at complete stock ?
And even 2 method doesn't say about s off?
Help plss
shurahbil said:
S on
Hboot 1.55
Main version 3.62.401.1
Cid htc_001 europe
I don't care tamperd and relocked and I don't want to s off
Only I want is stock phone and ota ok
So can I simply use ruu 1.29.401.1it will lead mee to jb4.1?
And while using Mike's guide 1 method with s on am I at complete stock ?
And even 2 method doesn't say about s off?
Help plss
Click to expand...
Click to collapse
shurahbil said:
can I simply use ruu 1.29.401.1it will lead mee to jb4.1?
Click to expand...
Click to collapse
No, because you need to downgrade to hboot 1.44 to run this ruu and this require s-off
If you don't want to go s-off, you can restore stock rom and recovery by flashing that rom:
http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
Can I receive ota by flashing that rom?
Am I at 100% stock
shurahbil said:
Can I receive ota by flashing that rom?
Am I at 100% stock
Click to expand...
Click to collapse
Yes and Yes, you have to select "stock recovery" when installing the Guru Reset for OTAs to install properly.
BTW: there's nothing newer than 3.62 at the moment
Give me link nkk
shurahbil said:
Give me link nkk
Click to expand...
Click to collapse
1- can you please post a "fastboot getvar all" (remove IMEI and s/n)
2- confirm you're unlocked
3- which recovery do you have
nkk71 said:
1- can you please post a "fastboot getvar all" (remove IMEI and s/n)
2- confirm you're unlocked
3- which recovery do you have
Click to expand...
Click to collapse
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55
(bootloader) version-baseband: 4A.21.
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S
(bootloader) serialno: FA35WW902409
(bootloader) imei: 354436058606037
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4261mV
(bootloader) partition-layout: Generi
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dir
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
bootloader relocked
stock recoveryy
used system dump guide of mike 1986
i have used system dump to go back to stock
http://forum.xda-developers.com/showthread.php?t=2224752
see this is the link of system dump
http://forum.xda-developers.com/showthread.php?t=2265618
an this is mikes guide back to stock see last part of poST
1 METHOD OF GOING BACK TO STOCK
"SO I JUST WANT TO CONFIRM THAT THESE ALL THINGS I HAVE DONE WITH S-ON
SO AM I AT 100% STOCK WITHOUT RESPECT TO TAMPERED AND RELOCKED TAG"
AND WILL I RECIEVE OTA FURTHER
shurahbil said:
C:\android>fastboot getvar all
(bootloader) version-bootloader: 1.55
(bootloader) version-baseband: 4A.21.
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
bootloader relocked
stock recoveryy
used system dump guide of mike 1986
Click to expand...
Click to collapse
shurahbil said:
i have used system dump to go back to stock
http://forum.xda-developers.com/showthread.php?t=2224752
see this is the link of system dump
http://forum.xda-developers.com/showthread.php?t=2265618
an this is mikes guide back to stock see last part of poST
1 METHOD OF GOING BACK TO STOCK
"SO I JUST WANT TO CONFIRM THAT THESE ALL THINGS I HAVE DONE WITH S-ON
SO AM I AT 100% STOCK WITHOUT RESPECT TO TAMPERED AND RELOCKED TAG"
AND WILL I RECIEVE OTA FURTHER
Click to expand...
Click to collapse
a- edit your post and remove IMEI and s/n
b- would have been nice to include all the output of getvar (you cut off after some 30 characters or so), so couldn't see if s-on or s-off
(bootloader) version-misc: PVT SHIP S
Click to expand...
Click to collapse
, i'll assume s-on
c- bootloader relocked
so here it goes
WITHOUT RESPECT TO TAMPERED AND RELOCKED TAG
Click to expand...
Click to collapse
1- unlock bootloader again
2- flash custom recovery again
3- install this rom using custom recovery: http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
----> select WIPE, select "stock recovery", root and radio are up to you
you're all done, you will receive OTAs without any problems.
* You do not need to lock or relock bootloader, you can if you want but it's not necessary.
* if you choose root, then you may (or may not) loose it after OTAs, but it will not affect the OTA upgrade.
Hope that helps.
listen one more problrm i have deleted data of google service framework
someone told that by doing this u will recieve ota
now i knew its all fake
now my google apps is giving problem and even app
now how should i install google service framework properlyy????????
shurahbil said:
listen one more problrm i have deleted data of google service framework
someone told that by doing this u will recieve ota
now i knew its all fake
now my google apps is giving problem and even app
now how should i install google service framework properlyy????????
Click to expand...
Click to collapse
reflash the same rom, without selecting wipe (known as a "dirty flash").
there are no OTAs after 3.62 at the moment, and when they become available they'll work fine without messing with google services.
Hi guys. I'm a noob​ so I kinda need some help. My HTC One is the M7UL and its on S-ON. Its on an unofficial CM11 custom ROM. Could anyone please give me detailed instructions on how 2 go back to Sense 5.5 and how to remove the "Tampered" on the bootloader menu? Thx a mile
raghav kapur said:
Hi guys. I'm a noob​ so I kinda need some help. My HTC One is the M7UL and its on S-ON. Its on an unofficial CM11 custom ROM. Could anyone please give me detailed instructions on how 2 go back to Sense 5.5 and how to remove the "Tampered" on the bootloader menu? Thx a mile
Click to expand...
Click to collapse
1- why not just flash a custom Sense ROM?
2- If you really need/want to go back to 100% stock (eg for warranty), you can check out my guide (in my signature), but you'll need go to S-Off first, and once you are, I recommend staying S-Off.
3- if you just want a quick and easy way just to get back a stock Sense ROM, you can also you a Guru Reset ROM, compatible with your firmware: http://www.htc1guru.com/downloads/stock-rom-downloads/
nkk71 said:
1- why not just flash a custom Sense ROM?
2- If you really need/want to go back to 100% stock (eg for warranty), you can check out my guide (in my signature), but you'll need go to S-Off first, and once you are, I recommend staying S-Off.
3- if you just want a quick and easy way just to get back a stock Sense ROM, you can also you a Guru Reset ROM, compatible with your firmware: http://www.htc1guru.com/downloads/stock-rom-downloads/
Click to expand...
Click to collapse
Thx a lot. But I believe that I can S-OFF only if I'm on stock HTC ROM. Or if im mistaken, could you please send me the link to S-OFF while I'm on the CM ROM itself.
Thx again
raghav kapur said:
Thx a lot. But I believe that I can S-OFF only if I'm on stock HTC ROM. Or if im mistaken, could you please send me the link to S-OFF while I'm on the CM ROM itself.
Thx again
Click to expand...
Click to collapse
can you post a "fastboot getvar all" (remove IMEI and s/n)
and please explain on what your ultimate goal is.
nkk71 said:
can you post a "fastboot getvar all" (remove IMEI and s/n)
and please explain on what your ultimate goal is.
Click to expand...
Click to collapse
Thx for your time and reply. My ultimate goal is to install Android Revolution HD ROM 5.2 which requires S-OFF
I'm uploading the fastboot var all in a minute
raghav kapur said:
Thx for your time and reply. My ultimate goal is to install Android Revolution HD ROM 5.2 which requires S-OFF
I'm uploading the fastboot var all in a minute
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH39CW903873
(bootloader) imei: 357864058941160
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4167mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
raghav kapur said:
C:\fastboot>fastboot getvar all
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
finished. total time: 0.047s
Click to expand...
Click to collapse
no version-main, again
you're on hboot 1.55, HTC__J15, PN0710, so you're firmware should be 3.62.401.1, you can try one of the following ROMs, to get S-Off using rumrunner: either ARHD 31.6 http://forum.xda-developers.com/showthread.php?t=2183023
or Guru Reset: http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/ (select ROOT, unselect "stock recovery")
and try to get s-off using rumrunner
PS: remove IMEI and s/n from your post
nkk71 said:
no version-main, again
you're on hboot 1.55, HTC__J15, PN0710, so you're firmware should be 3.62.401.1, you can try one of the following ROMs, to get S-Off using rumrunner: either ARHD 31.6 http://forum.xda-developers.com/showthread.php?t=2183023
or Guru Reset: http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/ (select ROOT, unselect "stock recovery")
and try to get s-off using rumrunner
PS: remove IMEI and s/n from your post
Click to expand...
Click to collapse
Saying thanks a mile would be an understatement . Have a good day
P.S. what is version-main
raghav kapur said:
Saying thanks a mile would be an understatement . Have a good day
P.S. what is version-main
Click to expand...
Click to collapse
it's your firmware version, been seeing quite a few posts where the number doesnt show up, but cant figure out why.
So you S-Off, all good?
Feel free to hit the thanks button if i've helped, and add [SOLVED] to main thread title if all is good. cheers
Hi,
I am trying to go back to stock (S-on and probably bootloader unlocked since it's a dev edition) so I could send the phone for repairs. I successfully flashed:
RUU Zip M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1-decrypted
but my hboot did not change and is 1.55. A lot of posts say it should be stock before trying to S-On or locking the bootloader. Does "stock" mean the one which the phone came with (1.44) or the one flashed with the RUU (probably 1.55)?
Also, if I successfully S-on with hboot 1.55, after I get the phone back is there a chance I will not be able to S-off again?
my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.22.1540.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4138mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-fe1214a4f2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
RUU.ZIP method (read posts #1, #2, and #4) from here: http://forum.xda-developers.com/showthread.php?t=2541082
using this ruu.zip http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_brightstarus_wwe_1-29-1540-3-zip/
and I guess you can skip setting LOCKED since it's a US Dev Edition
nkk71 said:
RUU.ZIP method (read posts #1, #2, and #4) from here: http://forum.xda-developers.com/showthread.php?t=2541082
using this ruu.zip http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_brightstarus_wwe_1-29-1540-3-zip/
and I guess you can skip setting LOCKED since it's a US Dev Edition
Click to expand...
Click to collapse
Thanks a lot, this will downgrade my hboot?,
Could you explain why the RUU which I flashed is not a good one? and just for future reference:
Does "stock hboot" mean the one which the phone came with (1.44) or the one flashed with the RUU (probably 1.55)? Or just a not modified one?
Also, if I successfully S-on with hboot 1.55, after I get the phone back is there a chance I will not be able to S-off again?
n3xas said:
Thanks a lot, this will downgrade my hboot?,
Could you explain why the RUU which I flashed is not a good one? and just for future reference:
Does "stock hboot" mean the one which the phone came with (1.44) or the one flashed with the RUU (probably 1.55)? Or just a not modified one?
Also, if I successfully S-on with hboot 1.55, after I get the phone back is there a chance I will not be able to S-off again?
Click to expand...
Click to collapse
1- yes it will downgrade, wipe, and restore everything to 100% stock.
2- "stock hboot" doesn't mean 1.44; 100% stock refers to the ROM + firmware (hboot is included in firmware) being HTC stock, i.e. nothing custom. It could be any version, so if you go buy a new M7 at the moment, high chances it already comes with hboot 1.57 (or at least 1.56)
3- there's nothing "wrong" with the ruu you suggested, but hboots above 1.54 (at least some), have shown to trigger "tamper detected - rebooting" and tampered being back in the bootloader screen, when going from S-Off to S-On
so to be safer, I suggested an older RUU
so if you intend on going S-ON, then I highly recommend you do it on hboot 1.44 or 1.54 (ROM/firmware version 1.xx.xxx.x or 2.xx.xxx.x respectively)
Hello Guys
i have a problem with my
HTC One M7 AT&T
MID: PN0712000
CID: CWS__001
cant get it back to stock. showing error that it is not the right RUU file
i am trying to flash this one RUU_M7_UL_JB_50_Cingular_US_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04_release_326691_signed_2_2
plz help me.....!
And it also show version-main empty
Only showing this display
***TAMPERED***
***RELOCKED***
*** Security warning***
m7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4m.27.3218.14
OpenDSP-v32.120.274.0909
OS-
amir_khan007 said:
Hello Guys
i have a problem with my
HTC One M7 AT&T
MID: PN0712000
CID: CWS__001
cant get it back to stock. showing error that it is not the right RUU file
i am trying to flash this one RUU_M7_UL_JB_50_Cingular_US_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04_release_326691_signed_2_2
plz help me.....!
and it also show version-main empty
Only showing this display
***TAMPERED***
***RELOCKED***
*** Security warning***
m7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4m.27.3218.14
OpenDSP-v32.120.274.0909
OS-
Click to expand...
Click to collapse
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here
alray said:
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here
Click to expand...
Click to collapse
will it still flash with version-main empty?
I am a noob at these things so kindly help me!!
You could to try flash 1.44 HBOOT, then give it a try (not to try a RUU flash, but back to stock, update everything and then try to RUU if needed)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT361W902272
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4316mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.094s
These are my Getvar all Details...
amir_khan007 said:
will it still flash with version-main empty?
Click to expand...
Click to collapse
Yes
teetx said:
You could to try flash 1.44 HBOOT, then give it a try (not to try a RUU flash, but back to stock, update everything and then try to RUU if needed)
Click to expand...
Click to collapse
You can't downgrade the hboot with S-ON and you don't want to downgrade it if flashing a 7.xx.xxx.x RUU, you need at least hboot 1.57.
alray said:
Yes
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_Radio_4M.32.3218.06_10.46.1718.01L_release_449059_signed_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!
Click to expand...
Click to collapse
alray said:
Yes
You can't downgrade the hboot with S-ON and you don't want to downgrade it if flashing a 7.xx.xxx.x RUU, you need at least hboot 1.57.
Click to expand...
Click to collapse
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_R adio_4M.32.3218.06_10.46.1718.01L_release_449059_s igned_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!
amir_khan007 said:
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_R adio_4M.32.3218.06_10.46.1718.01L_release_449059_s igned_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!
Click to expand...
Click to collapse
These errors don't look right at all. Did you read the "How to flash" instructions on the link @alray gave you.
Also be sure to use an admin cmd window
mb_guy said:
These errors don't look right at all. Did you read the "How to flash" instructions on the link @alray gave you.
Also be sure to use an admin cmd window
Click to expand...
Click to collapse
'How to flash' in the link is for zip RUU. my one is EXE file...!
PLZ TELL ME HOW TO GET RID OF THIS ERROR....!!
Try with another computer, looks like a Windows problem not related to the ruu itself. Do you have the latest C++ redistr installed on your computer?
alray said:
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here
Click to expand...
Click to collapse
OH MY GOODNESS
ITS DONE
ITS BACK
I CANT BELIEVE IT
@alray I dont know how to thank you. but I will pray to GOD to give you all the heavens HE made.................!!!
Amen
thanks buddy
thank you really very much....!!