Is anyone who is using the razr i - "one" mod, also experiencing lags and a really slow system?
the stock rom was a bit slow, too. so i thought i try out this mod, but it even got worse
did anyone try out the JellyAOSP Rom yet? Is it stable and fast ?
thanks!
johnseed2 said:
Is anyone who is using the razr i - "one" mod, also experiencing lags and a really slow system?
the stock rom was a bit slow, too. so i thought i try out this mod, but it even got worse
did anyone try out the JellyAOSP Rom yet? Is it stable and fast ?
thanks!
Click to expand...
Click to collapse
I have been using that MOD for quite a time, first it was very laggy, then reinstalled it with full wipe (every wipe possible), and then it was OK. I recommend it, but just because there aren't many other alternatives (yet)
I just installed 1.30 and I experience a little lag, especially in the dialer when swiping fom numpad and back. It's the blue 'call' bar that needs to load a bit.
---------- Post added at 08:44 PM ---------- Previous post was at 08:00 PM ----------
Oh and the contact are slow too
f3bruary said:
I just installed 1.30 and I experience a little lag, especially in the dialer when swiping fom numpad and back. It's the blue 'call' bar that needs to load a bit.
---------- Post added at 08:44 PM ---------- Previous post was at 08:00 PM ----------
Oh and the contact are slow too
Click to expand...
Click to collapse
I have installed 1.5 with last Omar Avelar's kernel. Really smooth and fast without lags.
If u are experiencing lags u have one option, clean install. Some users reported this problem, i can't give any other solution. Its the same for Omar's Rom and JellyAOSP 1.5 - dirty flash is running for some users, some experiencing lags and other problems.
FourOne82 said:
If u are experiencing lags u have one option, clean install. Some users reported this problem, i can't give any other solution. Its the same for Omar's Rom and JellyAOSP 1.5 - dirty flash is running for some users, some experiencing lags and other problems.
Click to expand...
Click to collapse
Your mod dosen't lag at all. works perfectly fine here.
clean install is the ONLY way to go when flashing a phone imo.
^Yeah u are probably right, so for everyone who is experiencing lags:
Download the latest *.zip file to your SD.
Flash the Motorola JB 4.1.2 EU firmware via RSDlite.
Make sure you have a custom recovery installed (I use CWM Recovery 6.0.1.9).
Boot into your custom recovery of choice.
Select "wipe data/factory reset" and confirm.
Select install zip from external card, and choose the zip file.
Hit Reboot.
U can probably skip part 2, but just to make sure your system partition is fine I recommend flashing the original firmware.
Related
Hi all.
I have Samsung galaxy s i9000 (GT-I9000).
I'm currently using pilotX rom. IBut it has a lot of problems.
So I want to try darky's rom.
What is the most stable one?
What kernel should I use?
Is there a step by step guide for installation?
Thanks,
FeL.
felzilber said:
Hi all.
I have Samsung galaxy s i9000 (GT-I9000).
I'm currently using pilotX rom. IBut it has a lot of problems.
So I want to try darky's rom.
What is the most stable one?
What kernel should I use?
Is there a step by step guide for installation?
Thanks,
FeL.
Click to expand...
Click to collapse
You can follow the steps
Fist install Darkys 10.2RE
http://www.hdtechvideo.com/?p=5
Then install Darky10.2.2 (latest stable release)
http://www.hdtechvideo.com/?p=48
Thanks.
I'll try it today.
P.S.
If there are suggestion for other good, stable rom I will be happy to hear about it.
felzilber said:
Thanks.
I'll try it today.
P.S.
If there are suggestion for other good, stable rom I will be happy to hear about it.
Click to expand...
Click to collapse
This one is good. and stable. Dont try to restore applications if you have a backup. Better install from the beginning..
anukilimanoor said:
This one is good. and stable. Dont try to restore applications if you have a backup. Better install from the beginning..
Click to expand...
Click to collapse
Do you mean once we have flashed darky 10.2 - DONT RESTORE APPS FROM BACKUP, WHY..??
what happens to all apps i purchased or downloaded..??
Rash said:
Do you mean once we have flashed darky 10.2 - DONT RESTORE APPS FROM BACKUP, WHY..??
what happens to all apps i purchased or downloaded..??
Click to expand...
Click to collapse
It doesnt mean that ... you can try to restore, but if you are facing any problem after restoring, like fc, random boot or lag then you have to worry about the restore. Normally for better performance use a fresh install (it is only my experience). If you are flashing the same version then no problem you can restore the application.
felzilber said:
Hi all.
I have Samsung galaxy s i9000 (GT-I9000).
I'm currently using pilotX rom. IBut it has a lot of problems.
So I want to try darky's rom.
What is the most stable one?
What kernel should I use?
Is there a step by step guide for installation?
Thanks,
FeL.
Click to expand...
Click to collapse
http://www.darkyrom.com/community/index.php?forums/rom-guides.23/
---------- Post added at 03:33 PM ---------- Previous post was at 03:31 PM ----------
anukilimanoor said:
This one is good. and stable. Dont try to restore applications if you have a backup. Better install from the beginning..
Click to expand...
Click to collapse
Totally disagree as 10.2 RE backs up all previous data on your SD, How ever it is recommended to use titanium back up for your apps
---------- Post added at 03:36 PM ---------- Previous post was at 03:33 PM ----------
Rash said:
Do you mean once we have flashed darky 10.2 - DONT RESTORE APPS FROM BACKUP, WHY..??
what happens to all apps i purchased or downloaded..??
Click to expand...
Click to collapse
You can restore from a backup just not a nand one from another rom use titanium backup and save all your apps (system data from CM7 etc will cause problems if you try and restore it) then restore once darkyRom has been flashed.
titanium backup has the nice feature of creating an update zip to flash in CWM after install
Hi, I am also in the same situation. I have been using PilotX for around a month now, but I am still not satisfied with my phone's performance. So I am considering installing Darky.
Did you succeed installing it? The main things I am trying to figure out now are:
1. Do I will need to install a special modem to make it work with Pelephone's network in Israel (my original phone used baseband I9000TJJJP3 if that says anything; with PilotX I now have I9000TUBJV6).
2. Since I am now on a different custom ROM, should I go back to my provider's stock ROM before proceeding with install, or does it not matter?
3. Any extra things to install for Hebrew support? (I don't need Hebrew menus, just properly rendering right-to-left in emails and messages).
I should probably start my own thread with questions (or read up some more about it first), but if you've gone through it now maybe you have tips.
Thanks
................
---------- Post added at 08:39 AM ---------- Previous post was at 08:38 AM ----------
....................
---------- Post added at 08:40 AM ---------- Previous post was at 08:39 AM ----------
...................
erang42 said:
Hi, I am also in the same situation. I have been using PilotX for around a month now, but I am still not satisfied with my phone's performance. So I am considering installing Darky.
Did you succeed installing it? The main things I am trying to figure out now are:
1. Do I will need to install a special modem to make it work with Pelephone's network in Israel (my original phone used baseband I9000TJJJP3 if that says anything; with PilotX I now have I9000TUBJV6).
2. Since I am now on a different custom ROM, should I go back to my provider's stock ROM before proceeding with install, or does it not matter?
3. Any extra things to install for Hebrew support? (I don't need Hebrew menus, just properly rendering right-to-left in emails and messages).
I should probably start my own thread with questions (or read up some more about it first), but if you've gone through it now maybe you have tips.
Thanks
Click to expand...
Click to collapse
Hi.
Sorry for the late answer.
1.I got Pelephone also. No need for special modem.
2. Just follow the manual.
3. You will need an rtl fix that you can find easily, and install hebrew layout for your keyboard.
Felix.
Page is not working
anukilimanoor said:
You can follow the steps
Fist install Darkys 10.2RE
Then install Darky10.2.2 (latest stable release)
PAGE IS NOT WORKING
Click to expand...
Click to collapse
Hey guys,
I recently installed my first Rom onto my Xperia X8, i used Racht's Floyo 1.0 (2.2.5 build 1.5b) but i'm having some issues with this rom such as:
Android Market not working (i.e version that come with the rom, 2.3.4, 3.1.3 and 3.4.4) it continously Force Closes therefor i have to uninstall market updates and use original, but it continually updates itself to my frustration.
Lag issues, although its stated on Android Forums and on other sites that Racht's rom is the best rom to use, i have noticed a lot of lags and delays throughout this rom, most noticable when scrolling through menu's.
Everything else as far as i can tell works.
Any help would be great.
There Is No Such Thing Is best rom
all rom have pros and cons
detailed about all rom with pros and cons
Here
robbiejuk08 said:
Hey guys,
I recently installed my first Rom onto my Xperia X8, i used Racht's Floyo 1.0 (2.2.5 build 1.5b) but i'm having some issues with this rom such as:
Android Market not working (i.e version that come with the rom, 2.3.4, 3.1.3 and 3.4.4) it continously Force Closes therefor i have to uninstall market updates and use original, but it continually updates itself to my frustration.
Lag issues, although its stated on Android Forums and on other sites that Racht's rom is the best rom to use, i have noticed a lot of lags and delays throughout this rom, most noticable when scrolling through menu's.
Everything else as far as i can tell works.
Any help would be great.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1332836
I think that Minicm is the best so far
until CM9 gets released for X8
Kuyadroid is fast and stable on stock kernel.
Sent from my E15i using XDA App
gdx with stock kernel,without dt module
---------- Post added at 01:54 AM ---------- Previous post was at 01:51 AM ----------
shvelo said:
I think that Minicm is the best so far
until CM9 gets released for X8
Click to expand...
Click to collapse
cm9 will not release for x8..
For me: CM7 with nAa kernel for CM7
Stable, fast, camara, wifi, bt, all works. Low power consumption.
hye
FDE+4,,good for gaming and no bugs,,im use it now,,u shoud try,,it the best 2.3.7:good::fingers-crossed:
1.6 Donut
I have said many times.
Anyways..
If you have a unlock bootloader go for GingerZaraki
And next time be careful not to post such questions. There is no such thing as best rom.
Try it on your own.
i flashed the king 3d rom to my lg thrill it looks amazing but the problem was that when i did i didn't have service and it only 3g and it and lg thrill is a 4g phone so can someone help me get the service on the king 3d room plz i really want it and i like it
You gotta change the flex file. You'll have a pretty weak signal though
Use aria's mms & 4G mod over in the development section
Sent from my LG-P925 using XDA
okay how do i do that i have no idea what you said am sorry am a noob but can you give me clear explanation and were i can get everything plz thanks in advance
cristiano_7 said:
okay how do i do that i have no idea what you said am sorry am a noob but can you give me clear explanation and were i can get everything plz thanks in advance
Click to expand...
Click to collapse
Well first, are you running gingerbread? If you are, what version?
You can't use this over V20P but you can with any other version. I suggest V20C
The link for the fixes is http://forum.xda-developers.com/showthread.php?t=1293947
Help (lg p920 3d rom)
is there any way to revert from king 3d rom to stock rom? cause im having problems with:
/widgets (when i set widgets,if rebooted,everything i put on it will be double copied 1st and 2nd windows will have the same widgets)
/time and date (if the phone was rebooted the date will be set into 1/1/2000 nd time will be 12:00am)
/purchased items on market such as axcel drum recieving messge like (thi software isnt compatible with your device), when i flashed into this rom, some items i payed for,i cant download it anymore unlike the previous rom i have i can install everything
/other downloadable apps i can download some apps but it force closes or automatic closes
/Saving Contacts whenever i save new contacts or replace, my phone hangs.. so i need to remove battery..
From 2.2.2 Froyo(Stock)
>Gingerbread 2.3.5
>then flashed king 3d rom
Well if you made a backup of your stock rom in clockworkmod, then yeah. Just wipe everything and restore your backup. If you didn't make a backup, then you could either flash to a different rom or you could kdz flash back to the stock rom.
i didnt..
could you give me some list of better rom for lg-p920 optimus 3d?
i was planning to flash cyanogen, but i cant seem to have a better reason to flash it, some thoughts are "would it be more stable than king 3d or it might have some more issues than my present rom"
could you give me a list of roms that runs perfectly on lgp920?
something stable to run on my phone? thanks
---------- Post added at 12:53 AM ---------- Previous post was at 12:42 AM ----------
wait.. what do you mean "i could kdz flash back to original rom."?
you mean its possible to revert everything without flashing the LGE stock rom kdz nor using a backup rom?
i tried to download it,found a link to the stock rom download but they are uploaded on fileserve server.. im unable to download it.. pls help..
You'd need to use the LG software (I know, it sucks) but I don't know of any other way without a cmd backup. If it's in a .zip format though, then you should be able to flash it. If not, just search around the forums. There are tons of very stable, very amazing roms made by Thaiaz, Meemo, The Dark Lestat. Just look around.
alright i will.. thank you bro.. ^_^
---------- Post added at 03:20 PM ---------- Previous post was at 02:58 PM ----------
one last question pls..
if i upgraded into gingerbread and flashed a new rom.. would gingerbread still be there?
i mean... roms (king 3d rom) and operating systems (gingerbread) are different installations right? im new with these things...im a bit confused haha..
==thank you for answering my questions..you really did helped me..and for the others who will read this thread ==
The kdz flash method will flash firmware baseband and bloatware cwm doesn't do baseband so you will still be on gingerbread
sent from my acidhazard thrill
Problem reading anything on king 3d rom
Hey I used the rom manager to install the King 3d rom and everything worked fine except now almost all the words are gone so i cant read anything when i open any app even the rom manager app. I tried to restore the original backup i made but it said the md5 had an error while restoring the system. If anyone could help me i would appreciate it!
When I first got my note I had this problem but found some fix to stop it. Now i upgraded and now have a rom on it and I am having this problem all over again. I have factory reset my phone 3 times and I am still getting it. I was hopping we had a sticky on about this but I am not able to fix a fix. Would anyone be able to tell me how to fix this.
Thanks in advance.
Hmm, I would wipe again, then flash a stock rom and try to go from there
Well I have wiped 2 times. I'm rooted with nc2. I'm using undroids rim which is stock. I will see if I can get a 100% stock rom though.
I will try to find you a leaked stock ROM [emoji4]
---------- Post added at 12:50 AM ---------- Previous post was at 12:45 AM ----------
http://www.android.gs/install-leaked-android-4-4-2-aucucmlg-firmware-on-att-galaxy-note-3/
Here try this
Also When did this problem occur?
xXPINCARXx said:
I will try to find you a leaked stock ROM [emoji4]
---------- Post added at 12:50 AM ---------- Previous post was at 12:45 AM ----------
http://www.android.gs/install-leaked-android-4-4-2-aucucmlg-firmware-on-att-galaxy-note-3/
Here try this
Also When did this problem occur?
Click to expand...
Click to collapse
When i got my note 3 in april i had this problem but found some way to fix it. I then updated to 4.4 and after having problem with google maps force closing on me all the time when trying to use it I though I should do a factory reset.
After the reset I started to have this problem again. I then though maybe if i rooted and then got a good rom I might be able to fix it.
I just tried by doing a factory reset from stock recover and will see if that helps.
Thanks for the links of the rom.
If you're looking for a great ROM that's customizable go with DynamicKat 4.1, Im currently running DynamicKat 4.1 with the Orange GPE theme. I get great battery life and very fast and smooth. Also I would recommend them AllianceROM as well. It's just as customizable.
Here is the links for both ROMS
Alliance ROM:
http://forum.xda-developers.com/showthread.php?t=2778933
DynamicKat:
http://forum.xda-developers.com/showthread.php?t=2709701
---------- Post added at 01:44 AM ---------- Previous post was at 01:31 AM ----------
Also this post should of been posed to the Q&A section, just for future references [emoji14]
Looks like DynamicKat is a nc2 build. I might just have to try that out. Thanks for the info
No problem my friend [emoji4]
Well I installed the DynamicKat rom and I still get the screen freeze. Whats funny is when it happens I can still use the stylist but just not my finder. I wish I could remember what I did before to make the problem go away. Maybe I just have to keep resetting my phone till I get it right. I hope there is a fix for this. Make me not want to get another samsung phone and this is my 4th one.
Hmm it might be hardware related and not software.. But im unsure myself, maybe do some research on google and see if anyone else has had this problem
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
Is anyone else having an issue like this? My Note 5 is on the latest T-Mobile firmware. I've got something like 40-70 pieces of bloat disabled, and I still get outrageous keyboard and general OS lag. Here's a look at the typing performance of a hangout.
Also here's OS monitors look at my running processes. Any insight?
Thanks for any help.
Anyone else have issues like this?
Yes I was having these issues. It was driving me nuts. I tried debloating, and factory resest, with no succes. After updating arter97 kernel my issues went away. Phone works like it should, no more lag or slugish UI. Are you rooted? What method did you use. I'm rooted, I used TEKHD's method. But he has an older kernel in his instuctions. Here are link to the updated kernel, I used version 11.0 http://forum.xda-developers.com/note5/development/arter97-kernel-galaxy-note-5-t3189907 Hope this help.
whasapening said:
Yes I was having these issues. It was driving me nuts. I tried debloating, and factory resest, with no succes. After updating arter97 kernel my issues went away. Phone works like it should, no more lag or slugish UI. Are you rooted? What method did you use. I'm rooted, I used TEKHD's method. But he has an older kernel in his instuctions. Here are link to the updated kernel, I used version 11.0 http://forum.xda-developers.com/note5/development/arter97-kernel-galaxy-note-5-t3189907 Hope this help.
Click to expand...
Click to collapse
I'm not rooted, as I have the Samsung accidental damage warranty. But dammit I think i might have to. I'm glad at least someone had these issues and I'm not alone.
I get the feeling it's a cpu governer issue or something.
Sent from my SM-N920T using Tapatalk
Anyone else have any suggestions? I've cleaned some more apps and it still seems to be an issue.
Sent from my SM-N920T using Tapatalk
The only solution is Swiftkey as arters kernel will only help and not eliminate it.
Similar Issues with other models
I have had similar issues with my SM-G928F (S6 Edge+) before the latest software update and factory reset that I usually accompany with it, I think there was something wrong with Samsung keyboard on android 5.1.1, but they seem to have fixed it, maybe check options in the keyboard and the phone, maybe turn things like power saving mode off and then on again.
Sent from my rooted G928F (Samsung Galaxy S6 Edge Plus)
I'm having a big trouble with keyboard also.. When I press smiley key it needs up to 1 / 1.5 second to switch to emojis.. It is annoying
Maybe It's up to keyboard? Everything else works fine
Can I re-instal keyboard or put keyboard from S6 or It's the same everywhere
---------- Post added at 10:25 PM ---------- Previous post was at 10:09 PM ----------
I just instaled google keyboard and It runs like hell.. so , so fast..
But I like more the stock one.. so any solutions? on my other phone (S6 Edge) never fel this lag.. never
Boot into recovery and wipe the cache partition. Before I rooted, that's how I'd solve my lag problems, which for me were very rare.
Akw6190 said:
Boot into recovery and wipe the cache partition. Before I rooted, that's how I'd solve my lag problems, which for me were very rare.
Click to expand...
Click to collapse
I did It once. Didn't help. Still slow when I want to go emoji page.
Is there a link to download and after instal/unninstal stock samsung keyboard
rankoradza said:
I did It once. Didn't help. Still slow when I want to go emoji page.
Is there a link to download and after instal/unninstal stock samsung keyboard
Click to expand...
Click to collapse
Nope. The Samsung keyboard, like most other system apps, can't be uninstalled unless you're rooted. If you're not rooted, the best you can do is download an alternative.
Akw6190 said:
Boot into recovery and wipe the cache partition. Before I rooted, that's how I'd solve my lag problems, which for me were very rare.
Click to expand...
Click to collapse
I've done this several times to no avail, thanks though.
Sent from my SM-N920T using Tapatalk
whasapening said:
Yes I was having these issues. It was driving me nuts. I tried debloating, and factory resest, with no succes. After updating arter97 kernel my issues went away. Phone works like it should, no more lag or slugish UI. Are you rooted? What method did you use. I'm rooted, I used TEKHD's method. But he has an older kernel in his instuctions. Here are link to the updated kernel, I used version 11.0 http://forum.xda-developers.com/note5/development/arter97-kernel-galaxy-note-5-t3189907 Hope this help.
Click to expand...
Click to collapse
As a follow up to your post, I've now factory reset and the problem is still occurring.
Sent from my SM-N920T using Tapatalk