When I first got my note I had this problem but found some fix to stop it. Now i upgraded and now have a rom on it and I am having this problem all over again. I have factory reset my phone 3 times and I am still getting it. I was hopping we had a sticky on about this but I am not able to fix a fix. Would anyone be able to tell me how to fix this.
Thanks in advance.
Hmm, I would wipe again, then flash a stock rom and try to go from there
Well I have wiped 2 times. I'm rooted with nc2. I'm using undroids rim which is stock. I will see if I can get a 100% stock rom though.
I will try to find you a leaked stock ROM [emoji4]
---------- Post added at 12:50 AM ---------- Previous post was at 12:45 AM ----------
http://www.android.gs/install-leaked-android-4-4-2-aucucmlg-firmware-on-att-galaxy-note-3/
Here try this
Also When did this problem occur?
xXPINCARXx said:
I will try to find you a leaked stock ROM [emoji4]
---------- Post added at 12:50 AM ---------- Previous post was at 12:45 AM ----------
http://www.android.gs/install-leaked-android-4-4-2-aucucmlg-firmware-on-att-galaxy-note-3/
Here try this
Also When did this problem occur?
Click to expand...
Click to collapse
When i got my note 3 in april i had this problem but found some way to fix it. I then updated to 4.4 and after having problem with google maps force closing on me all the time when trying to use it I though I should do a factory reset.
After the reset I started to have this problem again. I then though maybe if i rooted and then got a good rom I might be able to fix it.
I just tried by doing a factory reset from stock recover and will see if that helps.
Thanks for the links of the rom.
If you're looking for a great ROM that's customizable go with DynamicKat 4.1, Im currently running DynamicKat 4.1 with the Orange GPE theme. I get great battery life and very fast and smooth. Also I would recommend them AllianceROM as well. It's just as customizable.
Here is the links for both ROMS
Alliance ROM:
http://forum.xda-developers.com/showthread.php?t=2778933
DynamicKat:
http://forum.xda-developers.com/showthread.php?t=2709701
---------- Post added at 01:44 AM ---------- Previous post was at 01:31 AM ----------
Also this post should of been posed to the Q&A section, just for future references [emoji14]
Looks like DynamicKat is a nc2 build. I might just have to try that out. Thanks for the info
No problem my friend [emoji4]
Well I installed the DynamicKat rom and I still get the screen freeze. Whats funny is when it happens I can still use the stylist but just not my finder. I wish I could remember what I did before to make the problem go away. Maybe I just have to keep resetting my phone till I get it right. I hope there is a fix for this. Make me not want to get another samsung phone and this is my 4th one.
Hmm it might be hardware related and not software.. But im unsure myself, maybe do some research on google and see if anyone else has had this problem
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
Related
does anyone know how to fix the network on the hero. My 3g is not working , i tried to uncheck and check it on the settings menu. I had also re-installed the rom i was using and still cant get it to work. if anyone can help me please. message me..
Thank you
What ROM is it because some of the ROM do have issues.
Did u add any tweaks or kernels to ur ROM?
Did u get 3g on previous ROMs?if so which ones?
What prl and baseband are u using?
I can also suggest trying other ROMs.... but I cannot suggest until I know what ur current ROM is.
Thx
Sent from my HERO200 using Tapatalk
im using this Rom. [ROM] aospMod | AOSP 2.2.1 (Froyo). here is the link.http://forum.xda-developers.com/showthread.php?t=782320
well everything was working fine. its just happen two days ago...well thanks for the help. and no i havent added new kernels..its all basic how the rom is.
thanks
Flash back to ur backup of the stock ROM to test it.
If u don't have that backup then flash a "sense" ROM like liquid sense or nfx. This is if u call sprint for help the dialer codes they will have u input will work since dialer codes only work on the "sense" ROM.
Once u get it working on the sense ROM, make sure u do a backup of it and save a copy on ur computer as well for emergency purposes.
Now u can reflash the ROM u had or any other one h want.
Check out:
Hero deck
Jaycobs 2.2 and 2.3
Wild hero
iHero
Good luck
Sent from my HERO200 using Tapatalk
i would also call sprint and make sure its not something on there side its pretty rare that a rom would cause full data loss.
---------- Post added at 03:25 PM ---------- Previous post was at 03:23 PM ----------
i would also call sprint and make sure its not something on there side its pretty rare that a rom would cause full data loss.
also i would nand back to a sense rom real quick and update the prl.
thanks a lot...i will download one of the roms and call sprint....
i appreciate it...
Bierce22 said:
i would also call sprint and make sure its not something on there side its pretty rare that a rom would cause full data loss.
---------- Post added at 03:25 PM ---------- Previous post was at 03:23 PM ----------
i would also call sprint and make sure its not something on there side its pretty rare that a rom would cause full data loss.
also i would nand back to a sense rom real quick and update the prl.
Click to expand...
Click to collapse
Before calling sprint, do as Bierce suggested and update profile and prl. It may solve your problem.
Nandroids are for sissies.
Bang.
How do i update my Prl? can u let me know please..thanks
enyce5434 said:
How do i update my Prl? can u let me know please..thanks
Click to expand...
Click to collapse
After you download a stock sense Rom ( like nfx), go to about phone in settings. and then system updates or whatever its called and start updating. Did you ever do an update while running stock? Same thing.
You think Meth is bad? Try being a flash whore with a Gingerbread habit and a legacy device! It ain't pretty.
I'm going to assume you got this working again, but if you're still having issues, you can get your MSL code using this guide (actually pretty easy)
http://forum.xda-developers.com/showpost.php?p=6607745&postcount=1
Then, once you are on a sense rom, go to dialer and type ##786#. This should take you to a menu. When on that menu (if not prompted right away), press menu and select reset. Enter your MSL code as the password and commit. This will "Factory Reset" your phone. May well get the data back up after the hand's free activation processes again.
Hi all.
I have Samsung galaxy s i9000 (GT-I9000).
I'm currently using pilotX rom. IBut it has a lot of problems.
So I want to try darky's rom.
What is the most stable one?
What kernel should I use?
Is there a step by step guide for installation?
Thanks,
FeL.
felzilber said:
Hi all.
I have Samsung galaxy s i9000 (GT-I9000).
I'm currently using pilotX rom. IBut it has a lot of problems.
So I want to try darky's rom.
What is the most stable one?
What kernel should I use?
Is there a step by step guide for installation?
Thanks,
FeL.
Click to expand...
Click to collapse
You can follow the steps
Fist install Darkys 10.2RE
http://www.hdtechvideo.com/?p=5
Then install Darky10.2.2 (latest stable release)
http://www.hdtechvideo.com/?p=48
Thanks.
I'll try it today.
P.S.
If there are suggestion for other good, stable rom I will be happy to hear about it.
felzilber said:
Thanks.
I'll try it today.
P.S.
If there are suggestion for other good, stable rom I will be happy to hear about it.
Click to expand...
Click to collapse
This one is good. and stable. Dont try to restore applications if you have a backup. Better install from the beginning..
anukilimanoor said:
This one is good. and stable. Dont try to restore applications if you have a backup. Better install from the beginning..
Click to expand...
Click to collapse
Do you mean once we have flashed darky 10.2 - DONT RESTORE APPS FROM BACKUP, WHY..??
what happens to all apps i purchased or downloaded..??
Rash said:
Do you mean once we have flashed darky 10.2 - DONT RESTORE APPS FROM BACKUP, WHY..??
what happens to all apps i purchased or downloaded..??
Click to expand...
Click to collapse
It doesnt mean that ... you can try to restore, but if you are facing any problem after restoring, like fc, random boot or lag then you have to worry about the restore. Normally for better performance use a fresh install (it is only my experience). If you are flashing the same version then no problem you can restore the application.
felzilber said:
Hi all.
I have Samsung galaxy s i9000 (GT-I9000).
I'm currently using pilotX rom. IBut it has a lot of problems.
So I want to try darky's rom.
What is the most stable one?
What kernel should I use?
Is there a step by step guide for installation?
Thanks,
FeL.
Click to expand...
Click to collapse
http://www.darkyrom.com/community/index.php?forums/rom-guides.23/
---------- Post added at 03:33 PM ---------- Previous post was at 03:31 PM ----------
anukilimanoor said:
This one is good. and stable. Dont try to restore applications if you have a backup. Better install from the beginning..
Click to expand...
Click to collapse
Totally disagree as 10.2 RE backs up all previous data on your SD, How ever it is recommended to use titanium back up for your apps
---------- Post added at 03:36 PM ---------- Previous post was at 03:33 PM ----------
Rash said:
Do you mean once we have flashed darky 10.2 - DONT RESTORE APPS FROM BACKUP, WHY..??
what happens to all apps i purchased or downloaded..??
Click to expand...
Click to collapse
You can restore from a backup just not a nand one from another rom use titanium backup and save all your apps (system data from CM7 etc will cause problems if you try and restore it) then restore once darkyRom has been flashed.
titanium backup has the nice feature of creating an update zip to flash in CWM after install
Hi, I am also in the same situation. I have been using PilotX for around a month now, but I am still not satisfied with my phone's performance. So I am considering installing Darky.
Did you succeed installing it? The main things I am trying to figure out now are:
1. Do I will need to install a special modem to make it work with Pelephone's network in Israel (my original phone used baseband I9000TJJJP3 if that says anything; with PilotX I now have I9000TUBJV6).
2. Since I am now on a different custom ROM, should I go back to my provider's stock ROM before proceeding with install, or does it not matter?
3. Any extra things to install for Hebrew support? (I don't need Hebrew menus, just properly rendering right-to-left in emails and messages).
I should probably start my own thread with questions (or read up some more about it first), but if you've gone through it now maybe you have tips.
Thanks
................
---------- Post added at 08:39 AM ---------- Previous post was at 08:38 AM ----------
....................
---------- Post added at 08:40 AM ---------- Previous post was at 08:39 AM ----------
...................
erang42 said:
Hi, I am also in the same situation. I have been using PilotX for around a month now, but I am still not satisfied with my phone's performance. So I am considering installing Darky.
Did you succeed installing it? The main things I am trying to figure out now are:
1. Do I will need to install a special modem to make it work with Pelephone's network in Israel (my original phone used baseband I9000TJJJP3 if that says anything; with PilotX I now have I9000TUBJV6).
2. Since I am now on a different custom ROM, should I go back to my provider's stock ROM before proceeding with install, or does it not matter?
3. Any extra things to install for Hebrew support? (I don't need Hebrew menus, just properly rendering right-to-left in emails and messages).
I should probably start my own thread with questions (or read up some more about it first), but if you've gone through it now maybe you have tips.
Thanks
Click to expand...
Click to collapse
Hi.
Sorry for the late answer.
1.I got Pelephone also. No need for special modem.
2. Just follow the manual.
3. You will need an rtl fix that you can find easily, and install hebrew layout for your keyboard.
Felix.
Page is not working
anukilimanoor said:
You can follow the steps
Fist install Darkys 10.2RE
Then install Darky10.2.2 (latest stable release)
PAGE IS NOT WORKING
Click to expand...
Click to collapse
I am on CM9 ICS now.Because I have had battery issues on lg stock rom and CM7.The battery worked just fine for 2 days.Now it discharged from 100% to 40 % in 3 hours of standby.The screen flashes while sleepeng.Can i fix that? I had this problem on CM7 too but it drained only 20 %. Now it is awfull.
I need to send it for warranty and i need to put everything in place as it was when i got the phone.Can anyone tell me how to put everything back on?
I used NVflash for flashing.
Please help me!!!
andreiharpa said:
I am on CM9 ICS now.Because I have had battery issues on lg stock rom and CM7.The battery worked just fine for 2 days.Now it discharged from 100% to 40 % in 3 hours of standby.The screen flashes while sleepeng.Can i fix that? I had this problem on CM7 too but it drained only 20 %. Now it is awfull.
I need to send it for warranty and i need to put everything in place as it was when i got the phone.Can anyone tell me how to put everything back on?
I used NVflash for flashing.
Please help me!!!
Click to expand...
Click to collapse
you can update it through LG update tool...or first get it on stock based ROMs available on dev site.not the custom ROMs but rebuild ones...
normally there should not be a problem if the device is rooted but no idea about how your contract is...so unroot it finally or updating through the LG update from your laptop will unroot it anyway
or if you want to flash the NVflash method, which version you had...i have a few versions in my minus folder...can help u
---------- Post added at 03:19 PM ---------- Previous post was at 03:13 PM ----------
there is one thread already....
check : http://forum.xda-developers.com/showthread.php?t=1560975
SREEPRAJAY said:
you can update it through LG update tool...or first get it on stock based ROMs available on dev site.not the custom ROMs but rebuild ones...
normally there should not be a problem if the device is rooted but no idea about how your contract is...so unroot it finally or updating through the LG update from your laptop will unroot it anyway
or if you want to flash the NVflash method, which version you had...i have a few versions in my minus folder...can help u
---------- Post added at 03:19 PM ---------- Previous post was at 03:13 PM ----------
there is one thread already....
check : http://forum.xda-developers.com/showthread.php?t=1560975
Click to expand...
Click to collapse
I don't understand well the exact meaning of ROM and the differece from ROM and firmware. If i have an lg rom but it is not the one i have had on my phone when i got it, updating it will update the firmware on this ROM or the ROM itself? cause there are lots of ROMs depending of your country.
Firmware and rom are the same thing.
Sent from my Optimus 2X using XDA
You can flash some older (not the newest LG release) firmware with smartflash tool.
Instructions are here http://forum.xda-developers.com/showthread.php?t=1008070
Then you can use Lg upgrade tool and upgraded it to the latest version to be sure that you have the right version for your country.
andreiharpa said:
I am on CM9 ICS now.Because I have had battery issues on lg stock rom and CM7.The battery worked just fine for 2 days.Now it discharged from 100% to 40 % in 3 hours of standby.The screen flashes while sleepeng.Can i fix that? I had this problem on CM7 too but it drained only 20 %. Now it is awfull.
I need to send it for warranty and i need to put everything in place as it was when i got the phone.Can anyone tell me how to put everything back on?
I used NVflash for flashing.
Please help me!!!
Click to expand...
Click to collapse
Hello. If you will put the stock rom you will have the surprise that your phone don´t lose anymore the signal or problem with the battery and to sand it to warranty won´t help you. I suggest you to put the a rom that contains the stock firmware 20q http://forum.xda-developers.com/showthread.php?t=1544105 and the patch to disable the fd http://forum.xda-developers.com/showthread.php?t=1510926
good luck
vladutz9 said:
Hello. If you will put the stock rom you will have the surprise that your phone don´t lose anymore the signal or problem with the battery and to sand it to warranty won´t help you. I suggest you to put the a rom that contains the stock firmware 20q http://forum.xda-developers.com/showthread.php?t=1544105 and the patch to disable the fd http://forum.xda-developers.com/showthread.php?t=1510926
good luck
Click to expand...
Click to collapse
You're saying the problem is with the custom ROMs?
Because I'm using custom and I have no problems whatsoever. Why would the ROM work perfectly for most people and not so well for some people other than hardware problems?
LarsPT said:
You're saying the problem is with the custom ROMs?
Because I'm using custom and I have no problems whatsoever. Why would the ROM work perfectly for most people and not so well for some people other than hardware problems?
Click to expand...
Click to collapse
Really i don´t know why but in my case yes. I tried a lot of rooms, cm7, cm7.1, cm7 nighties ics4.0.3 , other rooms with gingerbread but only this 20q with the patch for disable FD is allowing my to not lose anymore the signal. Since i put this room i don´t have losing signal problems but the problem with the usb conection yes. My phone don´t connect to a pc from a long time ago.
Is anyone who is using the razr i - "one" mod, also experiencing lags and a really slow system?
the stock rom was a bit slow, too. so i thought i try out this mod, but it even got worse
did anyone try out the JellyAOSP Rom yet? Is it stable and fast ?
thanks!
johnseed2 said:
Is anyone who is using the razr i - "one" mod, also experiencing lags and a really slow system?
the stock rom was a bit slow, too. so i thought i try out this mod, but it even got worse
did anyone try out the JellyAOSP Rom yet? Is it stable and fast ?
thanks!
Click to expand...
Click to collapse
I have been using that MOD for quite a time, first it was very laggy, then reinstalled it with full wipe (every wipe possible), and then it was OK. I recommend it, but just because there aren't many other alternatives (yet)
I just installed 1.30 and I experience a little lag, especially in the dialer when swiping fom numpad and back. It's the blue 'call' bar that needs to load a bit.
---------- Post added at 08:44 PM ---------- Previous post was at 08:00 PM ----------
Oh and the contact are slow too
f3bruary said:
I just installed 1.30 and I experience a little lag, especially in the dialer when swiping fom numpad and back. It's the blue 'call' bar that needs to load a bit.
---------- Post added at 08:44 PM ---------- Previous post was at 08:00 PM ----------
Oh and the contact are slow too
Click to expand...
Click to collapse
I have installed 1.5 with last Omar Avelar's kernel. Really smooth and fast without lags.
If u are experiencing lags u have one option, clean install. Some users reported this problem, i can't give any other solution. Its the same for Omar's Rom and JellyAOSP 1.5 - dirty flash is running for some users, some experiencing lags and other problems.
FourOne82 said:
If u are experiencing lags u have one option, clean install. Some users reported this problem, i can't give any other solution. Its the same for Omar's Rom and JellyAOSP 1.5 - dirty flash is running for some users, some experiencing lags and other problems.
Click to expand...
Click to collapse
Your mod dosen't lag at all. works perfectly fine here.
clean install is the ONLY way to go when flashing a phone imo.
^Yeah u are probably right, so for everyone who is experiencing lags:
Download the latest *.zip file to your SD.
Flash the Motorola JB 4.1.2 EU firmware via RSDlite.
Make sure you have a custom recovery installed (I use CWM Recovery 6.0.1.9).
Boot into your custom recovery of choice.
Select "wipe data/factory reset" and confirm.
Select install zip from external card, and choose the zip file.
Hit Reboot.
U can probably skip part 2, but just to make sure your system partition is fine I recommend flashing the original firmware.
Hi,
I bought a J1 Mini (SM-105Y) as a stopgap cheapo phone last year when my long-suffering Galaxy Note IV decided to finally throw in the towel.
The thing is crazy slow with stock Droid. Is there any sense in even trying to put a custom ROM on it, or will this be more trouble than it's worth? I've gotten TWRP working, but can't seem to find any mainstream-ish custom OS that works with this phone. Or should I just leave well enough alone and keep it around as a backup phone?
Thanks for any suggestions.
Hi
@johnsalomon
How did you get TWRP running? I've got a SM-J105Y but I can't get it to work
can confirm v2.8.5.0 running on my sm-j105y
be aware versions can be hit or miss
---------- Post added at 02:16 PM ---------- Previous post was at 02:16 PM ----------
but cant get magisk to work