Database Develop

[Q] Micro SD ? DOH!!!

So I played around with these Touchpads, and I really like them. I bought one for $100 which was a good deal. But I was under the impression that they had a MicroSD slot from what my friend said.
So what I plan on doing is taking CR2 Raw files from my Canon SLR and putting them onto a MicroSd and show clients right after I took them with the Touchpad. The whole reason for me going down this road. I have tried looking through this site and really couldnt find anything.
So I found an adapter that will plug into the Microusb plug and I was wondering if there was thing better that you guys would suggest and or is this a good buy?
Juiced Systems 5 in 1 MHL Adapter
Thanks!!

glocke6 said:
So I played around with these Touchpads, and I really like them. I bought one for $100 which was a good deal. But I was under the impression that they had a MicroSD slot from what my friend said.
So what I plan on doing is taking CR2 Raw files from my Canon SLR and putting them onto a MicroSd and show clients right after I took them with the Touchpad. The whole reason for me going down this road. I have tried looking through this site and really couldnt find anything.
So I found an adapter that will plug into the Microusb plug and I was wondering if there was thing better that you guys would suggest and or is this a good buy?
Juiced Systems 5 in 1 MHL Adapter
Thanks!!
Click to expand...
Click to collapse
The usb adapter will work if you use a usb y cable and a usb power brick. The touchpads usb port supports usb host but has no power going out

tjsooley said:
The usb adapter will work if you use a usb y cable and a usb power brick. The touchpads usb port supports usb host but has no power going out
Click to expand...
Click to collapse
ok so how do i do this with a microsd card ? I dont want to have to sell this and get a different tablet..

glocke6 said:
So I played around with these Touchpads, and I really like them. I bought one for $100 which was a good deal. But I was under the impression that they had a MicroSD slot from what my friend said.
So what I plan on doing is taking CR2 Raw files from my Canon SLR and putting them onto a MicroSd and show clients right after I took them with the Touchpad. The whole reason for me going down this road. I have tried looking through this site and really couldnt find anything.
So I found an adapter that will plug into the Microusb plug and I was wondering if there was thing better that you guys would suggest and or is this a good buy?
Juiced Systems 5 in 1 MHL Adapter
Thanks!!
Click to expand...
Click to collapse
the internets (including this forum) are trashy w/ how to otg support..
go to you tube . find something by reverendkjr.. he has a bunch of vids..
good luck

glocke6 said:
ok so how do i do this with a microsd card ? I dont want to have to sell this and get a different tablet..
Click to expand...
Click to collapse
um pretty much what he said, the product you are looking at does you no good because there's not another cord stemming off of it in which you could plug into a power supply.
picture attached gives you a ****ty visualization, however i don't know where to find the product you're looking for lol

i bought a solar self powered 4 port hub and an otg cable.. that is your power source for the hptp micro port.. i paid less than 12$ for complete set up..
read this.. i used hub that has all ports inline instead of the OP's suggested hub.. Y cables are messy..
http://forums.webosnation.com/hp-to...ter-touchpad-connect-thumb-drive-kbd-etc.html
there have been major updates concerning the mount/unmount ing..
chainfire put out an app.. one solution of many

Read this post:
http://forum.xda-developers.com/showthread.php?t=1582771
For your setup you'd need an OTG cable with a way to supply power. Something like this should work if you have a USB power source, like your charger or one of those battery powered USB chargers. Then you'll need any USB microSD reader. The card will show up under "/mnt/usbdisk".

spunker88 said:
Read this post:
http://forum.xda-developers.com/showthread.php?t=1582771
For your setup you'd need an OTG cable with a way to supply power. Something like this should work if you have a USB power source, like your charger or one of those battery powered USB chargers. Then you'll need any USB microSD reader. The card will show up under "/mnt/usbdisk".
Click to expand...
Click to collapse
I have to be mobile for this is there any simple way to do this?

did you read about the self powered hub i linked to ?
if you want simpler, you would have to break into the internals and mod the hardware

[Q] Galaxy note charging issue - replaced charging port but still not fixed. help

Hi All,
I have read other threads and can not find answer so that is why i am creating this thread.
basic things to know...
1. Got my Galaxy Note (GN) off ebay. It came with the following major issue: "cannot be charged via laptop's usb port or wall socket"
2. GN does not have a custom rom. It is unlocked to any network. So, i am assuming it has a "stock rom". can someone tell me how to verify that?
3. I looked into various threads and ultimately decided to replace my usb charging port.
4. I should mention that before any replacement of parts whatsoever, i could see my device on windows and transfer files etc. via usb connection.
5. before and after replacement, it says its "charging" but nothing gets charged. If anything the battery level goes down. This suggests to me that there is an issue with charging circuitry somewhere? anyone can shed light on it?
6. Currently i am using an external charger to charge up my battery. Battery is fine as it gets charged up, just fine.
7. What other options do i have to find out the solution to my charging issues. Anything i can do to narrow down the issue further?
Any help will be greatly appreciated.
Regards,

Ebay is your best friend. You can change the charging usb port for less than 10 dollars. I bought mine from chinese supplier. The board cost me less than 9 dollars, shipped. It came within 2 weeks. You must open up your phone (8 tiny screws- see youtube video on how to open up n7000). The board comes out easily. You must check the revision on the usb port. Mine is 1.0. It also comes in 0.0, 0.8 and 2.0. I got the exact one with matching colors as the original part. I saw the same board in different revisions and with different colored boards. I got the same exact one, looking at the ebay picture. I was able to change my board in less than 10 minutes. problem solved.

aftabbabar said:
Ebay is your best friend. You can change the charging usb port for less than 10 dollars. I bought mine from chinese supplier. The board cost me less than 9 dollars, shipped. It came within 2 weeks. You must open up your phone (8 tiny screws- see youtube video on how to open up n7000). The board comes out easily. You must check the revision on the usb port. Mine is 1.0. It also comes in 0.0, 0.8 and 2.0. I got the exact one with matching colors as the original part. I saw the same board in different revisions and with different colored boards. I got the same exact one, looking at the ebay picture. I was able to change my board in less than 10 minutes. problem solved.
Click to expand...
Click to collapse
I have already changed the usb port and the problem persists.
How much of an issue will it be if the revision number do not match up with original one?
i dont have tools infront of me so i cant check whether there is a direct match or not.
thanks for reply.
regards,

troll_buster77 said:
I have already changed the usb port and the problem persists.
How much of an issue will it be if the revision number do not match up with original one?
i dont have tools infront of me so i cant check whether there is a direct match or not.
thanks for reply.
regards,
Click to expand...
Click to collapse
I think matching the revision is important. you must have your original part to verify which was the original revision. I have seen on threads where the revision was not matched and the part didn't help solve the problem.

troll_buster77 said:
Hi All,
I have read other threads and can not find answer so that is why i am creating this thread.
basic things to know...
1. Got my Galaxy Note (GN) off ebay. It came with the following major issue: "cannot be charged via laptop's usb port or wall socket"
2. GN does not have a custom rom. It is unlocked to any network. So, i am assuming it has a "stock rom". can someone tell me how to verify that?
3. I looked into various threads and ultimately decided to replace my usb charging port.
4. I should mention that before any replacement of parts whatsoever, i could see my device on windows and transfer files etc. via usb connection.
5. before and after replacement, it says its "charging" but nothing gets charged. If anything the battery level goes down. This suggests to me that there is an issue with charging circuitry somewhere? anyone can shed light on it?
6. Currently i am using an external charger to charge up my battery. Battery is fine as it gets charged up, just fine.
7. What other options do i have to find out the solution to my charging issues. Anything i can do to narrow down the issue further?
Any help will be greatly appreciated.
Regards,
Click to expand...
Click to collapse
Check if U607 and R619 are good, they are on the main board.
Download service manual to identify those parts and first check for bad solder joint.

I hqve the same priblem but i didnt check the part numbers gunna have a look for them now. In all honesty i thought it wouldnt matter as they may have been all the exact same
Sent from my GT-N7000 using xda app-developers app

lionelia said:
Check if U607 and R619 are good, they are on the main board.
Download service manual to identify those parts and first check for bad solder joint.
Click to expand...
Click to collapse
Whoah, seriously? Seems kinda like overkill. What I've heard most is having to hold the cable in 'just' the right position for it to charge, which doesn' t sound like a mainboard issue, since the charge port is connected via a ribbon block (and an antenna cable).
What's odd is that the charge port board on mine has this problem, but it is ROCK SOLID and the connector blade inside is totally clean. Pushing the plug down towards the back of the phone would, based on the physical layout of the internal USB pins, if anything, REDUCE contact pressure. It seems like this is a non-permanent problem and I SWEAR I saw an amazon post somewhere where a guy describes a simple physical mod that suddenly lets all normal charges work fine. Just can't find it...

I have a Samsung Note 2, same thing...not charging through the port, battery is good, charger is good, changed the charge port circuit and nothing...re installed the operating system, it's unlocked, rooted..works fine as long as I charge the battery externally...I have no idea what to do or which direction to go...any help...and I'll keep everyone posted as to the results of any suggestions...goo part is...I know how to get the thing apart....Blessings, As Always...

Same here - changed micro usb board and still not charging
Hi
I have the same problem. Have samd=sung galaxy note N7000 and suddenly stopped charging.
I changed the micro-usb port - it is the same version as the one inside. The mobile is still not charging! :crying:
Has anyone found a solution to this ?

even stranger
Have just noticed that the mobile charges fine in the car with the charger that originally caused the problem.
However it will charge with nothing else - neither USB port of PC not directly to wall socket.
Could the car charger have set it to charge at a higher voltage?
anes2828 said:
Hi
I have the same problem. Have samsung galaxy note N7000 and suddenly stopped charging.
I changed the micro-usb port - it is the same version as the one inside. The mobile is still not charging! :crying:
Has anyone found a solution to this ?
Click to expand...
Click to collapse

did you try different cables? bit silly answer but anyway try it.
Maybe different battery?
or a wall battery charger?
Sent from my GT-N7000 using Tapatalk 2

Hi all,
Sorry to revive an ageing thread but this still seems to be an issue at large.
I have a question:
I am a little confused. After seeing a number of these charge port PCB's on Ebay, some sellers are saying only for Rev 0.8 and others say nothing at all, yet in ALL the images from numerous sellers, the PCB's have Rev 1.0 written on them including my own N7000's charge port PCB.
Please could someone enlighten me?
Many thanks!

changed usb port after charging probs
Hi there,
I am having the same damn problem. After having charging probs and a loose connection, I decided to buy a new usb port and everything should be fine again. After replacing the port i tried to charge before installing the back case part and everything worked! But after putting the phone back into the case it went back to the problem like before replacing the port. It is loose and i cant get a pc connection to work.
So after disassembling it several times and reading forum posts in several boards i found this thread which has not the answer for the problem but some suggestions what could cause the problem.
I think it is not worth it to change the Motherboard too but if someone could test it that would help I think.
In another board someone wrote he had 3 port boards bought and they were all dead on arrival. So i believe this could also be the problem what do you think? Did anyone try different replacement parts from different shops?
And is yours charging if you do not install the backplate/backcase?

where did you buy the port? and is it same revision that was in their.
I think a new cable (proper quality) fixes it
that or pc driver reinstall
Sent from my GT-N7000 using Tapatalk 2

Hello,
Got a similar problem. Samsung note 1 (n7000) wasn't charging the battery. Holding the mini usb down was the trick.
I bought a new charging port and replaced it. The thing....it is charging now...but giving me: Emergency calls only!
Send back that part and got it replaced.... Just installed it and again: Emergency calls only...
It does show that it has reception. It's not due to my carrier as sim in another phone is working ok. Replacing the old part solves the problem.
If anyone has an idea how to solve this problem.....PLEASE let me know.
Regards

Moesab said:
Hello,
Click to expand...
Click to collapse
is it same revision? connectors and touchpoints on same place?
try these:
4llerbuntu said:
Open up the phone again. and check the screws that hold down the usb port
the speaker is attached to the plastic cover on top of the usb port. it is not making contact with the right points.
try it whilst the phone is on, play a audio or video file and hold down that part with your fingers. u will see that it will work.
meaning that the screws are either loose or too tight and not properly aligned.
Click to expand...
Click to collapse
nCoder said:
Click to expand...
Click to collapse

baz77 said:
is it same revision? connectors and touchpoints on same place?
try these:
Click to expand...
Click to collapse
Hello,
Yes, I should have mentioned that. Same revision. Connectors seem to be in the same place.
Please check picture. The one above is the original and the one with the white sticker is the replacement part.
Thanks for your response!

where did you get it?
try parts4repair.com they sell working ones and dustplugs for your usb hole
the bottum one is damaged on the chip on the left
Sent from my GT-N7000 using Tapatalk 2

baz77 said:
where did you get it?
try parts4repair.com they sell working ones and dustplugs for your usb hole
the bottum one is damaged on the chip on the left
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Damaged....really? I got it from Ebay (UK).
But 2 parts with the same problem? I will buy from another seller.
Thanks for your answer!

well you can check it, I am no expert but it looks damaged.
Sent from my GT-N7000 using Tapatalk 2

[Q] problem with mhl-hdmi adaptor

Good afternoon, everybody. I can not find the problem, on the Russian Forums Help is not found. (I am from Moscow). such a problem-acquired mhl-hdmi adapter. connecting entirely in accordance with the instructions is nothing happens. no pop-up window on the connected hdmi no display on the screen. the problem is clearly not in the adapter. I believe that I have something extra frozen / deleted. please if someone knows tell me what process / system file is responsible for displaying the image on the hdmi.thank you all in advance. and please do not delete the question if he is in the wrong section. move to the desired section please.

Make sure you are using 11pin (not 5 pin) adapter. Can you check adapter with another Note 2 to make sure that adapter is ok?
Sent from my SGH-T889 using xda app-developers app

you can also test the adapter with a Galaxy S3, and probably S4. I don't believe the S4 changed anything in the HML or USB port, so it's very likely the same as GN2 and S3.
Also, if you are using a HML adapter, make sure it has enough power. Not all adapters pulled enough power from the phone, so you will need an external power source. Most just use the USB cable and charger that come with the phone.

lovekeiiy said:
you can also test the adapter with a Galaxy S3, and probably S4. I don't believe the S4 changed anything in the HML or USB port, so it's very likely the same as GN2 and S3.
Also, if you are using a HML adapter, make sure it has enough power. Not all adapters pulled enough power from the phone, so you will need an external power source. Most just use the USB cable and charger that come with the phone.
Click to expand...
Click to collapse
unfortunately I have not the opportunity to try something different to what note2 or s3. if I had the chance I would not have asked for help. I just ask somebody to check on his device and see what process start when adapter connect to the phone and tv. sorry for any mistakes

the idea was to confirm that your GN2 wasn't working correct, and it wasn't the adapter. If the adpater worked, then it's the phone. If not, the it may be the adapter.
Depending on your adapter, it's possible there may not be enough power, thus, it's possible the HML isn't registering. I'm assuming you're not using some one directional HDMI cable.
I use an adapter as well. I needed a 5pin to 11pin adapter. I have to use the phone charger to power the adapter. The above video shows the setup and it working.
Maybe you can let someone at the store where you got the phone to test another phone with the adapter or an adapter with your phone. Hopefully they have TV with HDMI to test with. Maybe try an electronics store.

lovekeiiy said:
the idea was to confirm that your GN2 wasn't working correct, and it wasn't the adapter. If the adpater worked, then it's the phone. If not, the it may be the adapter.
Depending on your adapter, it's possible there may not be enough power, thus, it's possible the HML isn't registering. I'm assuming you're not using some one directional HDMI cable.
I use an adapter as well. I needed a 5pin to 11pin adapter. I have to use the phone charger to power the adapter. The above video shows the setup and it working.
Maybe you can let someone at the store where you got the phone to test another phone with the adapter or an adapter with your phone. Hopefully they have TV with HDMI to test with. Maybe try an electronics store.
Click to expand...
Click to collapse
Thank you very much. Today decided to move - to unfreeze all applications and restore all avtostarts. We'll see tomorrow at work. The results unsubscribe. By the way today went to the office store Samsung - I have the original cable. It turns out that the case in my phone. Charging and tried to 1A and 1.5A - no way. I really hope that everything will turn out tomorrow. Thanks for the video
By the way your adapter is not like mine. Apparently, in different regions of different designs.

gguitarist88 said:
Thank you very much. Today decided to move - to unfreeze all applications and restore all avtostarts. We'll see tomorrow at work. The results unsubscribe. By the way today went to the office store Samsung - I have the original cable. It turns out that the case in my phone. Charging and tried to 1A and 1.5A - no way. I really hope that everything will turn out tomorrow. Thanks for the video
By the way your adapter is not like mine. Apparently, in different regions of different designs.
Click to expand...
Click to collapse
It's don't work It is a pity. Don't know what's next search. What's the problem

the adapter I have is a generic one I got from Monoprice; they're a company that sells cheaper electronic, which is usually made in China. Thus, it is not the official sumsung one.
it looks like you're still in the situation where you don't know if it is your phone or the MHL adapter where the problem lies. I would consider going to an electronics store that sells TVs, phones, video games, and so forth; whatever is the similar to Best Buy in the USA. I don't know the stores that would be in Moscow. Bring your phone and adapter and see if they will let you hook up to one of their TVs. Also, see if they will let you test out another adapter, maybe one that they sell. And maybe they can let you test Samsung Galaxy S3, S4 or Note 2 with your adapter.
I think it may be the easiest way to figure it out based on your don't know anyone locally with any of the Samsung phones list above. There's just too many variables right now to effectively to say one way or the other.

thank you very much for the advice. yesterday went to the official store samsung. asked to check but no one helped me. so I will look for original cable and test all over again. today tried my cable on another galaxy note 2. no reaction. even tried to connect another cable hdmi, the more expensive and high quality. It seems the problem is still in the adapter.
lovekeiiy said:
the adapter I have is a generic one I got from Monoprice; they're a company that sells cheaper electronic, which is usually made in China. Thus, it is not the official sumsung one.
it looks like you're still in the situation where you don't know if it is your phone or the MHL adapter where the problem lies. I would consider going to an electronics store that sells TVs, phones, video games, and so forth; whatever is the similar to Best Buy in the USA. I don't know the stores that would be in Moscow. Bring your phone and adapter and see if they will let you hook up to one of their TVs. Also, see if they will let you test out another adapter, maybe one that they sell. And maybe they can let you test Samsung Galaxy S3, S4 or Note 2 with your adapter.
I think it may be the easiest way to figure it out based on your don't know anyone locally with any of the Samsung phones list above. There's just too many variables right now to effectively to say one way or the other.
Click to expand...
Click to collapse

lovekeiiy said:
the adapter I have is a generic one I got from Monoprice; they're a company that sells cheaper electronic, which is usually made in China. Thus, it is not the official sumsung one.
it looks like you're still in the situation where you don't know if it is your phone or the MHL adapter where the problem lies. I would consider going to an electronics store that sells TVs, phones, video games, and so forth; whatever is the similar to Best Buy in the USA. I don't know the stores that would be in Moscow. Bring your phone and adapter and see if they will let you hook up to one of their TVs. Also, see if they will let you test out another adapter, maybe one that they sell. And maybe they can let you test Samsung Galaxy S3, S4 or Note 2 with your adapter.
I think it may be the easiest way to figure it out based on your don't know anyone locally with any of the Samsung phones list above. There's just too many variables right now to effectively to say one way or the other.
Click to expand...
Click to collapse
not aware of the USB debugging should be enabled or not? and then perhaps because of this problem?

that should not effect the HDMI/HML. Mine is always enableed, but only triggers when connected to a PC. Most likely, the HML uses more pins than the USB for a PC, which is why it doesn't trigger.

lovekeiiy said:
that should not effect the HDMI/HML. Mine is always enableed, but only triggers when connected to a PC. Most likely, the HML uses more pins than the USB for a PC, which is why it doesn't trigger.
Click to expand...
Click to collapse
May be you sell me your own ? :laugh: obviously work. or tell me where you bought?

MHL 3.0 Adapter...

I have been scouring the web & even overseas manufacturers looking for anyone that can provide a MHL 3.0 Adapter. Has anyone seen one on the market yet? Some of the overseas sites are poorly worded, MHL 3.0 USB, but upon further investigation, all have been MHL 2.0 with support for USB 3.0.
If anyone has a source for these, in either single unit or batch lots for resale, please let me know.

GSLEON3 said:
I have been scouring the web & even overseas manufacturers looking for anyone that can provide a MHL 3.0 Adapter. Has anyone seen one on the market yet? Some of the overseas sites are poorly worded, MHL 3.0 USB, but upon further investigation, all have been MHL 2.0 with support for USB 3.0.
If anyone has a source for these, in either single unit or batch lots for resale, please let me know.
Click to expand...
Click to collapse
http://www.ebay.com/itm/MHL-3-0-Mic...Phone_PDA_Cables_Adapters&hash=item27df8f9066

Only 3.0 is compatible with m8?

I have this one from monoprice, just have to find it and see if it will work with my M8.
http://www.monoprice.com/Product?c_...83314&p_id=8675&seq=1&format=2#specifications

Vesponew said:
Only 3.0 is compatible with m8?
Click to expand...
Click to collapse
NO> Any that aupprts the 5-pin should work fine. It is just that 2.0 & 3.0 don't need external power, if supported by the device, & 3.0 has greater speed & bandwidth capabilities. 4K video & 7.1 surround sound (L-PCM) support.

scooterman said:
http://www.ebay.com/itm/MHL-3-0-Mic...Phone_PDA_Cables_Adapters&hash=item27df8f9066
Click to expand...
Click to collapse
Except that one states in big red letter that external power is REQUIRED. WHich would make it MHL 1.0. It also states 1080p, again MHL 3.0 supports 4k video. Most of the MHL 2.0 devices also support at least USB 3.0, that one supports USB 2.0, which again supports it being an MHL 1.0 device.
That's the thing, I have found a few that claim to be MHL 3, but none of them seem to pan out to actually be MHL 3.0. Most of the time when you contact to call them on it, or inquire, you get zero response. Ebay is pretty notorious for knock offs too, like the 128Gb & even 64Gb UH1 Micro SD cards.

So there is no mhl 3.0 5pin out there adapter yet.
Which 2.0 5 pin adapter should I be
buying for the HTC One m8?

Badelhas said:
So there is no mhl 3.0 5pin out there adapter yet.
Which 2.0 5 pin adapter should I be
buying for the HTC One m8?
Click to expand...
Click to collapse
Good question. I am researching that now. I find it hard to believe that a year old standard still isn't supported by accessory manufacturers, even though it is by the device manufacturers.
I'll let you know what ones I try & how it goes.

GSLEON3 said:
Good question. I am researching that now. I find it hard to believe that a year old standard still isn't supported by accessory manufacturers, even though it is by the device manufacturers.
I'll let you know what ones I try & how it goes.
Click to expand...
Click to collapse
Nice, thanks m8

MoNsTeReNeRgY22 said:
I have this one from monoprice, just have to find it and see if it will work with my M8.
http://www.monoprice.com/Product?c_...83314&p_id=8675&seq=1&format=2#specifications
Click to expand...
Click to collapse
That's the same exact one I bought for my LG G2. I assumed the G2 supported MHL, but in fact it supported DisplayPort, so I had this laying around for a while, and it works just fine for the M8.

GSLEON3 said:
Good question. I am researching that now. I find it hard to believe that a year old standard still isn't supported by accessory manufacturers, even though it is by the device manufacturers.
I'll let you know what ones I try & how it goes.
Click to expand...
Click to collapse
It might be a year old standard, but devices/phones supporting it are only just now being released. So, accessory manufacturers have had no reason to manufacture any adapters until now. Hopefully it won't be too long until we start seeing some now that there are some devices that can take advantage of it.

Anyone found a working MHL adapter that sells to Europe? Monoprice dosent and I bought one from eBay and it dosent work

Hey Guys!
1 st post here !
Would this work ?
The Rocketfish RF-G1171
I m a newbie I can t post links lol

Badelhas said:
Anyone found a working MHL adapter that sells to Europe? Monoprice dosent and I bought one from eBay and it dosent work
Click to expand...
Click to collapse
http://www.ebay.co.uk/itm/1080P-Mic..._MobilePhoneDataCables_JN&hash=item27e2c0cb36

Thanks. That's the one I tried and didn't work but maybe it was defective. Did anyone bought that one also? Does it work on the HTC One m8?

For what its worth the one I bought I have to plug things in in a specific order or it won't work. I believe it is power, then HDMI, then MHL into M8. I have to do this each time, if I unplug it from the phone and just plug it back in it won't work until I unplug everything and reconnect in that order.

Nice, thanks for the tip

zenisnotchosen said:
For what its worth the one I bought I have to plug things in in a specific order or it won't work. I believe it is power, then HDMI, then MHL into M8. I have to do this each time, if I unplug it from the phone and just plug it back in it won't work until I unplug everything and reconnect in that order.
Click to expand...
Click to collapse
I finally received a different MHL adapter I bought but it still dosent work. I did what you said, first power, then HDMI and then MHL to the phone. The symbol of MHL beeing connected appears but there is onde more no image on the TV. I even tried connecting first power, then MHL and then HDMI but it´s the same thing. Can someone give me some tips, please? I am getting desperate

Did you ever get this figured out? I just used mhl for the first time on my m8. I used the same cable I did for my m7. It's a
Skiva 6.5 feet MHL (Micro USB) to male HDMI cable. I had trouble at first but here's how I got it to work flawlessly: first I plugged everything in, no particular order... Next I plugged in the micro usb part to my m8 while the tv input was still on my normal everyday input... I waited until my red charging light turned on my m8 then I switched to the correct tv input. My m8 went into mhl mode and I streamed a movie perfectly.
I tried switching the tv input first then plugging in my phone and it wouldn't work. But, when I left it on my normal input, then plugged my phone in and saw it was charging, then changed inputs.... Success!

Thanks, I will try if that works. But I've got little hopes, to be honest

Weird charging problem...

Hi,
I' ve a weird problem about charging. 2 days ago, i plugged the charger and saw the red light. When i woke up, the phone completely gone. I tried to charge several adaptors but none of them worked.
Then, i plugged the laptop via usb, phone starts to charging. I can charge my phone only this way.
Do you have any idea about this problem ?
I do not want to send guarantee, because i don't trust them, they always says this was a user fault vs.
At the end, if powerbank charge my phone, i will buy a one which fast charger to solve the problem.

I finally charged my phone via unnamed traveller charging adaptor. But i can not charge with original Samsung charging adaptor. Do you any idea about this ???
Same adaptor works s8, doesn't work note 8.

ixuss40 said:
I finally charged my phone via unnamed traveller charging adaptor. But i can not charge with original Samsung charging adaptor. Do you any idea about this ???
Same adaptor works s8, doesn't work note 8.
Click to expand...
Click to collapse
Sounds to me like the original Samsung charging adaptor might be broken and not anything regarding your phone.

Max_Terrible said:
Sounds to me like the original Samsung charging adaptor might be broken and not anything regarding your phone.
Click to expand...
Click to collapse
Two different original Samsung adaptor doesn't work, but unnamed adaptor works.
I guess need to try before buying a adaptor

Same here, only charger that works is with my old Huawei. Took my phone for warranty repair but they told me the warranty was void because I root it. So frustrating with this phone

Max_Terrible said:
Sounds to me like the original Samsung charging adaptor might be broken and not anything regarding your phone.
Click to expand...
Click to collapse
He just said he tried numerous Adapters and I would assume cables.... So It may be a charging port problem.... Or the Converse of his procedures he used different Adapters but same cable leading me to the cable being Suspect... Either way It doesn't feel like its a phone issue...

If you have tried using different cable and different Official Samsung Adaptive Fast Chargers. Then there is some wrong with your device. You would have to get it repaired however seeing as you have already rooted it. You would have to take it to a 3rd party repair specialist and let them take a look at it.

studiorat said:
He just said he tried numerous Adapters and I would assume cables.... So It may be a charging port problem.... Or the Converse of his procedures he used different Adapters but same cable leading me to the cable being Suspect... Either way It doesn't feel like its a phone issue...
Click to expand...
Click to collapse
Yes, that's pretty much what I said. I don't think it's the phone either. He didn't say anything about different cables, so I'm assuming it's the same cable. I still think it's the Samsung adaptor that's the problem.

I have the same issue. my n950f only charge with powerbank or unknown wall chargers and with the notebook usb port but, the worst is that Windows dont recognize the phone, only charge it. I installed various kernels but the issue still persists.

bigcalvin said:
I have the same issue. my n950f only charge with powerbank or unknown wall chargers and with the notebook usb port but, the worst is that Windows dont recognize the phone, only charge it. I installed various kernels but the issue still persists.
Click to expand...
Click to collapse
Then you need to get another Samsung Adaptive Fast Charger as yours is broken and needs replaced. This sort thing happens quite easily with chargers as they generate allot of heat to convert the power to your device to charge it.

iceepyon said:
Then you need to get another Samsung Adaptive Fast Charger as yours is broken and needs replaced. This sort thing happens quite easily with chargers as they generate allot of heat to convert the power to your device to charge it.
Click to expand...
Click to collapse
men I did it. various chargers and various cables. only wireless charge works.

bigcalvin said:
men I did it. various chargers and various cables. only wireless charge works.
Click to expand...
Click to collapse
In that case you need to take your device to a Service Center and let them take a look at it. They will probably repair it free of charge if it is still under warranty.

bigcalvin said:
men I did it. various chargers and various cables. only wireless charge works.
Click to expand...
Click to collapse
You need to replace the USB charging port. Simple as that, and no wire or 3rd party sh!t is going to fix it!!