[Q] Need Help !! My C6602 often dead - Xperia Z Q&A, Help & Troubleshooting

Hi sir, I need your help.
this problem I guess starting when I tried to change my network mode through xposed (FYI: in my country ID doesn't fully support LTE yet, but I try enable all network type) then my phone automatically set to LTE mode and suddenly got turn off when I unlock screen. at the moment I realize that my C6602 isn't LTE
FYI I tried to solve it, here is I've tried:
-Flash stock FTF
-Restore NANDROID but failed (CWM error while restore /system, I've regenerating md5 and it's fine)
-Relock BL
-Remove SDCard
-Remove SIMCard
few main problems:
-when I discharging, sometimes it work normally (didn't turn off) except if I setting my clock time, open camera, and few apps it's suddenly turn off
-however if I tried turn on my phone, it's stuck at sony logo then turn off again and I can't turn it on except if my phone charging it's can boot perfectly
-when I succeed use my phone (with charging attached) then I check network mode there's LTE mode !! how can I fix this network mode? I desire like before (WCDMA preferred/GSM, there's no LTE mode)
so sorry if this thread similar with others but I'm already search and surfing any thread it no result
------------------------------------------------------------------
now my phone on stock 4.3 / LB / without root

anyone alse can help me :/ thanks

ryandxter said:
anyone alse can help me :/ thanks[/QU
which country or carrier is the phone from? make sure you download and flash the appropriate ftf that is only for c6603. flash it with flashtool and it should boot up nicely. if you are having troubles on 4.3 ftf, then possbile try the lower version (4.2.2 or 4.1.2) and then connect it with pc suite and update from there
Click to expand...
Click to collapse

tanny0543 said:
which country or carrier is the phone from? make sure you download and flash the appropriate ftf that is only for c6603. flash it with flashtool and it should boot up nicely. if you are having troubles on 4.3 ftf, then possbile try the lower version (4.2.2 or 4.1.2) and then connect it with pc suite and update from there
Click to expand...
Click to collapse
my county is ID, but I usually using FTF 4.3 SG (singapore) region before and it's works fine
I've already tried using lower version 4.2.2 SG too but still none works

correction
my device is 6602

Related

[SOLVED] xperia Tx - No 3G coverage after Upgrading to JB

HIIii Guys
i upgraded my Tx to JB yesterday, everythng is ok .. but no 3G coverage at all
it's telling me that no sim is inserted ..
Mobile network stat : disconnected
network type : UNKNOWN
i rooted th device ..
any ideas ??
what did you do?
How did you update it?
How did you root it?
gregbradley said:
what did you do?
How did you update it?
How did you root it?
Click to expand...
Click to collapse
On ICS i was using 3G normally, then i upgraded to JB via Sony PC companion
i lost the 3G signal
i rooted the device using (Bin4ry_v28 tool), it's fine, no rooting problems at all.
what do u think ?
Dodger86 said:
On ICS i was using 3G normally, then i upgraded to JB via Sony PC companion
i lost the 3G signal
i rooted the device using (Bin4ry_v28 tool), it's fine, no rooting problems at all.
what do u think ?
Click to expand...
Click to collapse
did you root before or after the upgrade?
gregbradley said:
did you root before or after the upgrade?
Click to expand...
Click to collapse
ICS 4.0.4 was not rootable on Tx, i had 2 choices : downgrade OR upgrade
i rooted after upgrading ..
OK
Find a ftf file for your phone (Probably one in the all in one thread) and flash it using flashtool. Just make sure your exclude everything except baseband. That will restore your phone radio settings
gregbradley said:
OK
Find a ftf file for your phone (Probably one in the all in one thread) and flash it using flashtool. Just make sure your exclude everything except baseband. That will restore your phone radio settings
Click to expand...
Click to collapse
i'm totally new to android and xperia .. i've just upgraded from the ugly IOS :laugh:
so i hav no idea about flashing and ftf and such things, i barely rooted my phone
i was reading ur thread in (all in one) section .. but still afraid of doing it wrong ..
so let me check it with u ..
1- i should look for FTF file for xperia Tx JB
2- i should download a flashtool
3- i should flash everythng except baseband .. and this will restore my 3G coverage
is that correct ?
Dodger86 said:
i'm totally new to android and xperia .. i've just upgraded from the ugly IOS :laugh:
so i hav no idea about flashing and ftf and such things, i barely rooted my phone
i was reading ur thread in (all in one) section .. but still afraid of doing it wrong ..
so let me check it with u ..
1- i should look for FTF file for xperia Tx JB
2- i should download a flashtool
3- i should flash everythng except baseband .. and this will restore my 3G coverage
is that correct ?
Click to expand...
Click to collapse
yes. Find flashtool in the first post in the dev section
Flash the ftf using flasdhtool. You will be given options to exclude certain bit of the file. Tick everything except baseband so that only the radio bit of the file is flashed
And welcome back from the dark side...iOS is like swearing here...
gregbradley said:
yes. Find flashtool in the first post in the dev section
Flash the ftf using flasdhtool. You will be given options to exclude certain bit of the file. Tick everything except baseband so that only the radio bit of the file is flashed
And welcome back from the dark side...iOS is like swearing here...
Click to expand...
Click to collapse
HIiii ..
i had troubles downloading the FTF file, so after some googling i decided to make my own 1.
1- i downloaded SUS
2- updated my phone
3- got the 3 update files from the file db
4- downloaded the latest Flashtool 0.9.10.1 from th official page
here comes a problem ..
there's no toolbox in this flash tool, so i wasn't able to decrype the files, i also couldn't fine LT29i in th devices list.
after some googling i downloaded th 0.9.10.2beta6 from this forum, which has a toolbox
1- i ran flashtool 0.9.10.2beta6
2- decrypt th files
3- created the FTF file
4- flash-mode
5- connected my xperia while pressing th volume key
6- phone connected in flash mode .... stuck here
7- nothing happened after that.
so i tried to flash it with 0.9.10.1
i just didn't have the option to exclude baseband from the list.
so :
1- i went back to 0.9.10.2beta6
2- i created a FTF file with baseband excluded from the hole file
3- i put the file in the 0.9.10.1 folders
4- i ran flashtool 0.9.10.1
5- flashed the phone
6- turned my phone on
8- every thing is OK BUT i still dnt have 3G coverage
can u help ?
Have you tried just a repair via PC Companion? Flashtool seems a bit long winded when PCC should do all this for you.
Wobba-Lee said:
Have you tried just a repair via PC Companion? Flashtool seems a bit long winded when PCC should do all this for you.
Click to expand...
Click to collapse
It was after updating using pcc that theproblems started....so he has to take that out of the process
Dodger86 said:
HIiii ..
i had troubles downloading the FTF file, so after some googling i decided to make my own 1.
1- i downloaded SUS
2- updated my phone
3- got the 3 update files from the file db
4- downloaded the latest Flashtool 0.9.10.1 from th official page
here comes a problem ..
there's no toolbox in this flash tool, so i wasn't able to decrype the files, i also couldn't fine LT29i in th devices list.
after some googling i downloaded th 0.9.10.2beta6 from this forum, which has a toolbox
1- i ran flashtool 0.9.10.2beta6
2- decrypt th files
3- created the FTF file
4- flash-mode
5- connected my xperia while pressing th volume key
6- phone connected in flash mode .... stuck here
7- nothing happened after that.
so i tried to flash it with 0.9.10.1
i just didn't have the option to exclude baseband from the list.
so :
1- i went back to 0.9.10.2beta6
2- i created a FTF file with baseband excluded from the hole file
3- i put the file in the 0.9.10.1 folders
4- i ran flashtool 0.9.10.1
5- flashed the phone
6- turned my phone on
8- every thing is OK BUT i still dnt have 3G coverage
can u help ?
Click to expand...
Click to collapse
The problem is the file that pccompanion is downloading for you. It has the wrong baseband. That's why you need to get another ftf file for your phone.
If you create a ftf file from your pccompanion (Or SUES) download you will still be using the wrong files.
What was the issue with downloading the ftf file?
gregbradley said:
It was after updating using pcc that theproblems started....so he has to take that out of the process
The problem is the file that pccompanion is downloading for you. It has the wrong baseband. That's why you need to get another ftf file for your phone.
If you create a ftf file from your pccompanion (Or SUES) download you will still be using the wrong files.
What was the issue with downloading the ftf file?
Click to expand...
Click to collapse
i tried to download th global version from josenoguera.es .. it seems like the link is not alive.
i also found it on 4shared .. but it was sooo slaw and unstable download.
would you plz give me a link for a good FTF file for Xperia TX ?
and i also need a flashtool with a toolbox for TX
Thanks
Any of these
Xperia TX 9.1.B.0.411
[STOCK FIRMWARE]LT29i_9.1.B.0.411_Global.ftf by thejosetree
[STOCK FIRMWARE] [FTF] Xperia TX (LT29i) 9.1.В.0.411 (cust.1266-6178)Russia - Android 4.1.2 Jelly Bean by dogsly
[STOCK FIRMWARE][STOCK FW] Xperia TX LT29i 9.1.B.0.411 Jelly Bean France FTF by BreckZeBoulay
[STOCK FIRMWARE][STOCK FW] Xperia TX LT29i 9.1.B.0.411 Jelly Bean Malaysian FTF by AmeiN
[STOCK FIRMWARE][Stock][FTF][TX/LT29i] 9.1.B.0.411 Taiwan by zx4636313
[STOCK FIRMWARE]Xperia TX Jelly Bean Hong Kong (Version not provided) by m2toby
Find them in post 3 of the all in one thread.
For flashtool, find it in the first post of the first thread in the dev section.
If PCC is downloading the wrong basband shouldnt it have killed the 3G on everyones TX who has updated to JB using PCC?
IMHO I feel that something went wrong at the time of update specific to this user and rerunning the process would fix it.
Wobba-Lee said:
If PCC is downloading the wrong basband shouldnt it have killed the 3G on everyones TX who has updated to JB using PCC?
IMHO I feel that something went wrong at the time of update specific to this user and rerunning the process would fix it.
Click to expand...
Click to collapse
No, he already tried that.
It seems it is downloading a wrong ftf file because of a corrupt build.prop or some changes made prior to using pccompanion.
If you change the device name to something else it prompts pccompanion to download another set of files.
That's how people manage to download multiple ftf files for different regions and different operators. They change their build.prop.
This is the first step in a problem solving process and if it doesn't work it could be something else, but he has stated he has already tried repairing using pccompanion
gregbradley said:
No, he already tried that.
It seems it is downloading a wrong ftf file because of a corrupt build.prop or some changes made prior to using pccompanion.
If you change the device name to something else it prompts pccompanion to download another set of files.
That's how people manage to download multiple ftf files for different regions and different operators. They change their build.prop.
This is the first step in a problem solving process and if it doesn't work it could be something else, but he has stated he has already tried repairing using pccompanion
Click to expand...
Click to collapse
Fair enough. I cant see the post were they stated they had already tried that. I was under the impression the build.prop hadnt been touched as they stated root wasnt available to them until after the upgrade. Also I would assume TX is TX it is not like T/TL if the wrong update was pushed via PCC the deivce would not boot at all.
Yeah, I just looked back through the thread, I may be getting mixed up, I have so many people I am currently helping on this forum and in PM....
@OP
Did you try to repair the phone using PCCompanion or SUES yet?
gregbradley said:
Yeah, I just looked back through the thread, I may be getting mixed up, I have so many people I am currently helping on this forum and in PM....
@OP
Did you try to repair the phone using PCCompanion or SUES yet?
Click to expand...
Click to collapse
i was on ICS 4.0.4 .. working on 3G sim
upgraded to JB 4.1.2 via PCC .. no 3G coverage
rooted the phone .. no 3G coverage
reparing via PCC ,, no 3G coverage
updated via SUS .. no 3G coverage
flashed with my own FTF excluding baseband .. no 3G coverage
now flashed with (LT29i_9.1.B.0.411_FR_Unbranded.ftf) using flashtool 0.9.8.0 excluding baseband .. still no 3G coverage
GSM sim is working normally in all previous processes
now dnt know what to do !!
i basically bought xperia Tx to use 3G sim
any other ideas ??
Dodger86 said:
i was on ICS 4.0.4 .. working on 3G sim
upgraded to JB 4.1.2 via PCC .. no 3G coverage
rooted the phone .. no 3G coverage
reparing via PCC ,, no 3G coverage
updated via SUS .. no 3G coverage
flashed with my own FTF excluding baseband .. no 3G coverage
now flashed with (LT29i_9.1.B.0.411_FR_Unbranded.ftf) using flashtool 0.9.8.0 excluding baseband .. still no 3G coverage
GSM sim is working normally in all previous processes
now dnt know what to do !!
i basically bought xperia Tx to use 3G sim
any other ideas ??
Click to expand...
Click to collapse
why are you excluding baseband...the whole point is to exclude everything EXCEPT baseband!
the baseband controls the radio.
try your FTF file again in flashtool and tick all exclude options EXCEPT baseband
let me know how it goes
Just out of curiosity have you tried: Settings -> Xperia -> Internet Settings?

[Q] How to fully restore Xperia Z1

Hi,
Im trying to restore Xperia Z1 original firmware (that can get updates from Sony) and I cant seem to succeed...
I have used flashtool but the software is just not right:
I can't use Wi-Fi, the sim is not working anymore (Im from Israel), everytime the phone get shut down - it asks me in what language do I want to use...
`I have tried using PC companion (Repair) also` but it tells me that my phone doesnt have an update.
I dont know what to do anymore
any advice?
Just download a rom for your model z1 and use, 'Flashtool' to flash the image.
sm.vassallo said:
Just download a rom for your model z1 and use, 'Flashtool' to flash the image.
Click to expand...
Click to collapse
I did that.
The IMEI is gone. Nothing seems to work ...
its probably because the flash version is not compatible with the baseband. Try flashing an older version (for eg. .108 version : u can get it from mega ftf thread in general section) and then after the flash, pc companion should detect and install the latest update.

HELP: Upgraded from stock 4.2.2 to 4.4 and lost network connectivity

Hello All,
Tried searching for a case peculiar as mine, wasnt able to find one so here is the lowdown.
1. Xperia C6603 , originally had 4.2.2 stock ROM which was working fine with my local network. Dont remember the baseband version.
2. Used XperiFirm to download the latest firmware as reported in the list. Dont know what does the suffix RxD (R1D--R8D) means. Anyone please explain. As per the below screenshot downloaded version "C6603_Customized HK_1270-5695_10.5.1.A.0.292_R1D" .
3. Before flashing the downloaded firmware I flashed the dualrecovery from XZDualRecovery. I made a TWRP backup of the 4.2.2 stock ROM on an external SD card, for all partitions including TA,system,boot etc.
4. Used Flashtool to convert the downloaded (step 2) firmware "FILES" format to a flashable FTF file. Flashed the firmware , which went on smoothly.
5. At the first startup I got the following screen , telling me that it is a prototype device/firmware . I went on to see that the network which was working fine with stock ROM 4.2.2 was no longer available.
I tried to go to settings to check and search for networks, which shows available networks, but unable to get itself registered to the SIM providers network. Tried all the settings combinations in menu "*#*#4636*#*#" , nothing makes it work to get the GSM network connectivity back. It is supposedly on the correct setting of LTE/WCDMA/GSM which my current operator supports. Following is the "About" screen for current baseband version.
Tried going in the "Service" menu via "*#*#7378423#*#*" , with the following info, having an unknown modem configuration.
6. Tried reverting back to the old TWRP backup, for which I needed the TWRP recovery loaded on the phone. So ran the XZDualRecovery script again (with the new 4.4 ROM on the phone), however the script hangs around in the end and never reboots the phone with the TWRP recovery. So i am unable to revert and use the stock ROM backups .
7. I dont want to root/unlock the bootloader, however I tried installing TWRP via its "XZrecovery.apk", but it requires busybox (which requires a rooted phone). So i tried the rooting script from [GUIDE] How to root 10.5.1.A.0.283 / 10.5.1.A.0.292 [Locked Bootloader], but it also hangs around in the end and never delivers a rooted phone.
8. Tried looking around for assortment of xperia Z baseband files to check and see if flashing it separately can make it work, however to no avail the the condition persists.
Either ways having a prototype version on the phone which transmits all data back to sony is not desirable at all. So need to replace it for sure. Currently I am stuck in the middle without a clue of how to go back and restore the 4.2.2 TWRP backup, or to actually flash a "non-prototype" or retail version of 4.4.x .
Any help/guidance/suggestions to remedy would be appreciated.
Thanks.
=====================UPDATE
Ok followed the instructions at [GUIDE] How to root 10.5.1.A.0.283 / 10.5.1.A.0.292 [Locked Bootloader] , read carefully again to flash the .230 kernel. Flashed the XZDualRecovery and got the TWRP recovery back.
Restored the old 4.2.2 TWRP backup , hoping that everything would go back to normal. However with a successul restore and a reboot, I was amazed to see I still have no network connectivity. The baseband version is "9x15A-ACEFWMAZQ-30110068-44" . Another noticeable thing was that after the restore and first boot, I still got the "prototype device" message again, which was not there when I first booted the device with original stock 4.2.2 ROM before this flashing adventure began.
Any ideas what may have gone bad.
Thanks.
=======================================
Just got to know that my device is a BROWN device, its IMEI number starts from 0044 so it is a prototype. Any ideas is it really good or bad to have one. Also I see that after another restore of the original stock 4.2.2 ROM it is barely getting the signals indoor (1 bar only). The signal reception is very weak and sporadic . Should i keep the device or not and is there any remedy or network signal strength.
Thanks.
HyperEscape said:
Hello All,
Tried searching for a case peculiar as mine, wasnt able to find one so here is the lowdown.
1. Xperia C6603 , originally had 4.2.2 stock ROM which was working fine with my local network. Dont remember the baseband version.
2. Used XperiFirm to download the latest firmware as reported in the list. Dont know what does the suffix RxD (R1D--R8D) means. Anyone please explain. As per the below screenshot downloaded version "C6603_Customized HK_1270-5695_10.5.1.A.0.292_R1D" .
3. Before flashing the downloaded firmware I flashed the dualrecovery from XZDualRecovery. I made a TWRP backup of the 4.2.2 stock ROM on an external SD card, for all partitions including TA,system,boot etc.
4. Used Flashtool to convert the downloaded (step 2) firmware "FILES" format to a flashable FTF file. Flashed the firmware , which went on smoothly.
5. At the first startup I got the following screen , telling me that it is a prototype device/firmware . I went on to see that the network which was working fine with stock ROM 4.2.2 was no longer available.
I tried to go to settings to check and search for networks, which shows available networks, but unable to get itself registered to the SIM providers network. Tried all the settings combinations in menu "*#*#4636*#*#" , nothing makes it work to get the GSM network connectivity back. It is supposedly on the correct setting of LTE/WCDMA/GSM which my current operator supports. Following is the "About" screen for current baseband version.
Tried going in the "Service" menu via "*#*#7378423#*#*" , with the following info, having an unknown modem configuration.
6. Tried reverting back to the old TWRP backup, for which I needed the TWRP recovery loaded on the phone. So ran the XZDualRecovery script again (with the new 4.4 ROM on the phone), however the script hangs around in the end and never reboots the phone with the TWRP recovery. So i am unable to revert and use the stock ROM backups .
7. I dont want to root/unlock the bootloader, however I tried installing TWRP via its "XZrecovery.apk", but it requires busybox (which requires a rooted phone). So i tried the rooting script from [GUIDE] How to root 10.5.1.A.0.283 / 10.5.1.A.0.292 [Locked Bootloader], but it also hangs around in the end and never delivers a rooted phone.
8. Tried looking around for assortment of xperia Z baseband files to check and see if flashing it separately can make it work, however to no avail the the condition persists.
Either ways having a prototype version on the phone which transmits all data back to sony is not desirable at all. So need to replace it for sure. Currently I am stuck in the middle without a clue of how to go back and restore the 4.2.2 TWRP backup, or to actually flash a "non-prototype" or retail version of 4.4.x .
Any help/guidance/suggestions to remedy would be appreciated.
Thanks.
=====================UPDATE
Ok followed the instructions at [GUIDE] How to root 10.5.1.A.0.283 / 10.5.1.A.0.292 [Locked Bootloader] , read carefully again to flash the .230 kernel. Flashed the XZDualRecovery and got the TWRP recovery back.
Restored the old 4.2.2 TWRP backup , hoping that everything would go back to normal. However with a successul restore and a reboot, I was amazed to see I still have no network connectivity. The baseband version is "9x15A-ACEFWMAZQ-30110068-44" . Another noticeable thing was that after the restore and first boot, I still got the "prototype device" message again, which was not there when I first booted the device with original stock 4.2.2 ROM before this flashing adventure began.
Any ideas what may have gone bad.
Thanks.
=======================================
Just got to know that my device is a BROWN device, its IMEI number starts from 0044 so it is a prototype. Any ideas is it really good or bad to have one. Also I see that after another restore of the original stock 4.2.2 ROM it is barely getting the signals indoor (1 bar only). The signal reception is very weak and sporadic . Should i keep the device or not and is there any remedy or network signal strength.
Thanks.
Click to expand...
Click to collapse
Firstly I love the detail you have provided which would save you and me a lot of time to pinpoint the exact problem and work it accordingly.
Firstly, I would suggest that if you have a box or any other receipt that shows your exact device name with its basebands. Where did you buy it from and what is your exact location so we can guess your region. This is the time to show it now. Also which basebands work in your location can also help us out.
The problem you have made it flashed basebands of a different variant which has resulted in loss of network. So to fix it we need, and there are three ways about it.
First, download Sony PC companion and try to repair your phone and see if that helps.
Secondly, download flashtool and ftf for your device (make sure you select the right variant this time. Choosing for wrong device can hard brick your phone. so beware) and flash your phone with it.
If all this fails, you go to Sony flashtool called Emma. Download it and try to flash it with that.
You can google how to use every tool on xda and I am sure you would find a lot of guides for that.
Quote me back in case you expect an answer

Z1 AU SOl23 No simcard could be recognized

Hi everyone,
I use rom 5.1.1 for Z1 C6903 to upgrade my phone (Z1 AU SOL23).
In previous time I used flashtool 0.9.18.4 to flash rom 5.0.2 C6903 (I ticked at Exclude Partition and Baseband). And everything is ok.
But at this time I used flashtool 0.9.19.8 to flash rom 5.1.1 C6903. In this version of flashtool have no BASEBAND option and I can only tick at PARTITION. And now I can't receive incomming call. Outgoing calls and receive SMS is ok.
And I tried to flash to original firmware 4.2.2 (SOL23_KDDI JP_1275-6766_14.3.C.0.239_R21C). My phone say "No SIM card could be recognized and the phone can only be used offline, with Wi-Fi, and for emegency calls"
I continue to try to flash C6903 5.1.1 firmware by flashtool 0.9.18.4, I ticked at Exclude PARTITION AND BASEBAND but the Baseband still be upgraded to newer version and the phone recognize simcard but can't receive calls
Formely when I tick at Eclude BASEBAND and it keep old version of original firmware and I can receive incomming calls.
There a way to get rid of "No SIM card couldbe recognized"?
I've just found the solution, that I go to Setting => More => Mobile Networks => Network Mode => And select Overseas Auto. Then the phone recognize my simcard immediately. And I flash one more time 5.1.1 International firmware. Now all things work like charm
reallove0810 said:
I've just found the solution, that I go to Setting => More => Mobile Networks => Network Mode => And select Overseas Auto. Then the phone recognize my simcard immediately. And I flash one more time 5.1.1 International firmware. Now all things work like charm
Click to expand...
Click to collapse
is nfc work in international firmware?? if work please explain me, thxb4

Xperia (Z1) IMEI Null, Baseband Unknown and Sim is not being detected.

I Have a Xperia Z1 C6903 run Lollipop 5.1
One day when i switched on the phone , the IMEI was NULL, the baseband was unknown and i was not getting signals from my network provider.
I flashed stock rom but it is still in the same condition
Ive tried many other methods but they also didnt work.
If anyone Knows a fix plz lemme know
Zoom-X said:
I Have a Xperia Z1 C6903 run Lollipop 5.1
One day when i switched on the phone , the IMEI was NULL, the baseband was unknown and i was not getting signals from my network provider.
I flashed stock rom but it is still in the same condition
Ive tried many other methods but they also didnt work.
If anyone Knows a fix plz lemme know
Click to expand...
Click to collapse
i had this problem couple of times, and i just open phone app and try to make a call, then it will detect baseband and get signal
test it
check this http://www.mashinie.com/trick-to-create-sony-stock-ftf-rom.html
flash all files and you might be done !!!!
Imei null , baseband unknown
My mobile was not switching on 3 weeks ago (this happened when my imei was null and baseband was unknown) , so i connected it to my pc and did something and my IMEI came back , baseband too came back everything was working fine.
But yesterday my mobile froze and it was completely not responding , it was not even switching off, so i pressed power and volume up button it switched off, but when i switched it on again, the imei & baseband was gone .
What to do now?
Zoom-X said:
My mobile was not switching on 3 weeks ago (this happened when my imei was null and baseband was unknown) , so i connected it to my pc and did something and my IMEI came back , baseband too came back everything was working fine.
But yesterday my mobile froze and it was completely not responding , it was not even switching off, so i pressed power and volume up button it switched off, but when i switched it on again, the imei & baseband was gone .
What to do now?
Click to expand...
Click to collapse
is your device switching to flashmode ?
if it goes in flash mode then follow this steps
download pc companion and install it,then open it and click on start in support zone section, then select repair my phone
Then select your device and download the original firmware, then after downloading the original files ....minimize pc companion and download flashtool from here dl-developer.sonymobile.com/tools/Flash_tool_for_Xperia_7.zip now install flashtool and drivers (drivers will be in flashtool folder in c drive) now open my computer and navigate to here C:\ProgramData\Sony Mobile\Update Engine\localstorage\13740270
now make a ftf file of this (how to make ftf file https://talk.sonymobile.com/t5/Xperia-mini-pro/How-to-get-ftf-ROM-from-PC-companion-update/td-p/178996)
now flash that ftf in flashmode
if helped give a thanks
xperia z1
I had the same problem and occurred when I mistakenly installed rom for 6903 to 6902 , did not recognize the phone sim card , wireless did not work , the IMEI number is not showing.
error in the software
gile78-gaga89 said:
I had the same problem and occurred when I mistakenly installed rom for 6903 to 6902 , did not recognize the phone sim card , wireless did not work , the IMEI number is not showing.
error in the software
Click to expand...
Click to collapse
i reinstalled the correct firmware , but still
also , Everything was working fine , but one day the mobile froze and when i rebooted it, everything gone

Categories

Resources