[Q] stuck on "unlocked" and s-on, please help - One (M7) Q&A, Help & Troubleshooting

i have been trying to go back to stock in order to remove a sim lock but everything i try fails.
i am using windows 7 with usb3 (dont have2), i updated all drivers, uninstalled Sync.
i have tried everything to s-off and unlock the phone. when trying to use unlock_code there no errors but also the phone is not being unlocked.
when trying to install ruu or use a back up verification fails.
i have no idea what to try next :crying:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.1700.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4316mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

Looks like this is a converted Google play edition, evident by the ATT CID.
You are toast at the moment unless you can find the ATT KitKat firmware.zip which is higher than 3.62.1700.1

any chance you know where i should look for it ?

Its not out yet. Should be available soon but no one knows the date. You need the firmware.zip from ATT OTA file, and flash it on your device. That is your ONLY hope. As both DEV and Google edition kitkat firmware does NOT allow unlocking bootloader.

no other options, at all ?

b
Sent from my HTC One using XDA Premium 4 mobile app

is there really nothing else i can try to s-off ???

does anyone have any ideas ?

can anyone see if they can help ? please ?
im stuck in a different country with no phone and no way of sim unlocking....

There is nothing else

i see that At&t released the 4.4.2 update, can anyone help find the firmware.zip ?

Grab the ota here http://www.androidfilehost.com/?fid=23329332407573841 and grab firmware.zip zip from inside.

cschmitt said:
Grab the ota here http://www.androidfilehost.com/?fid=23329332407573841 and grab firmware.zip zip from inside.
Click to expand...
Click to collapse
Can I just flash this OTA from TWRP? I have TWRP recovery/Rooted/S-On.

SMaximus7 said:
Can I just flash this OTA from TWRP? I have TWRP recovery/Rooted/S-On.
Click to expand...
Click to collapse
You can try.. Otherwise push to sdcard, flash stock recovery, go to it and use the update.zip option. So may need to rename to update.zip
sent from my mobile device

SaHiLzZ said:
You can try.. Otherwise push to sdcard, flash stock recovery, go to it and use the update.zip option. So may need to rename to update.zip
sent from my mobile device
Click to expand...
Click to collapse
I can't find the ATT 4.3 stock recovery. Would the one from this rom work? or does it have to be the recovery that came with 4.3?

SaHiLzZ said:
You can try.. Otherwise push to sdcard, flash stock recovery, go to it and use the update.zip option. So may need to rename to update.zip
sent from my mobile device
Click to expand...
Click to collapse
what do you think is the best way for me to install this hoping it will fix my issue ????

Download OTA as linked. Extract firmware.zip
Then flash it twice. Reboot to bootloader,unlock using HTC DEV and hope for best
sent from my mobile device
---------- Post added at 08:35 PM ---------- Previous post was at 08:34 PM ----------
Fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
Fastboot reboot-bootloader
sent from my mobile device

still cant unlock even after the update. splash screen is not showing when trying HTC DEV

Related

phone reboots subsequently stuck arhd 5.1 ge rom

i have stucked on on boot on arhd 5.1 google edition
i have no other rom in my sdcard only ge 5.1
and phone reboots suddenly after the choose language option comes i am s_on
and even i cannot s off to directly run ruu
and i even cannot put any rom in my sdcard
i have installed a rom manyy times but it reebots and reboots and reboots??
help guys
first things first, you need a computer with adb and fastboot. as well as proper drivers.
please paste the output of fastboot getvar all here [remove the imei and serial!]
is your bootloader unlocked? do you have a custom recovery installed?
shurahbil said:
i have stucked on on boot on arhd 5.1 google edition
i have no other rom in my sdcard only ge 5.1
and phone reboots suddenly after the choose language option comes i am s_on
and even i cannot s off to directly run ruu
and i even cannot put any rom in my sdcard
i have installed a rom manyy times but it reebots and reboots and reboots??
help guys
Click to expand...
Click to collapse
ipfreelytech said:
first things first, you need a computer with adb and fastboot. as well as proper drivers.
please paste the output of fastboot getvar all here [remove the imei and serial!]
is your bootloader unlocked? do you have a custom recovery installed?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4104mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
yes bootloader unlock
and i can get into recoveryy
we need to get you s-off if you want to run 4.4 GPE roms.
Grab this rom: http://forum.xda-developers.com/showthread.php?t=2224752
i'd recommend the odexed version
boot into recovery and wipe data (and data/media!)
go back to the main menu
choose install zip from sideload
adb sideload zipname.zip
that will push the zip to the phone and install.
reboot and you should have a working 4.3 stock sense rom.
Then try rumrunner to get s-off:
http://rumrunner.us/
once you get s-off you can run the GPE 4.4 conversion ruu. that will get you a totally stock google play edition. from there you can flash a custom recovery and try other 4.4 roms should you choose.
shurahbil said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4104mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
yes bootloader unlock
and i can get into recoveryy
Click to expand...
Click to collapse
ipfreelytech said:
we need to get you s-off if you want to run 4.4 GPE roms.
Grab this rom: http://forum.xda-developers.com/showthread.php?t=2224752
i'd recommend the odexed version
boot into recovery and wipe data (and data/media!)
go back to the main menu
choose install zip from sideload
adb sideload zipname.zip
that will push the zip to the phone and install.
reboot and you should have a working 4.3 stock sense rom.
Then try rumrunner to get s-off:
http://rumrunner.us/
once you get s-off you can run the GPE 4.4 conversion ruu. that will get you a totally stock google play edition. from there you can flash a custom recovery and try other 4.4 roms should you choose.
Click to expand...
Click to collapse
where should i place the stock rom ?????? i cant connect to sdcard ?
sdcard is irrelevant. this phone doesn't even have an sdcard.
did you flash cwm or twrp recovery? if not then do so.
then you install the rom using install from sideload. with the command adb sideload rom.zip
shurahbil said:
where should i place the stock rom ?????? i cant connect to sdcard ?
Click to expand...
Click to collapse
ipfreelytech said:
sdcard is irrelevant. this phone doesn't even have an sdcard.
did you flash cwm or twrp recovery? if not then do so.
then you install the rom using install from sideload. with the command adb sideload rom.zip
Click to expand...
Click to collapse
are bro tell me step by step
ihave downloaded that system dump
now i have cwm recovery i can get into recovery but cannot boot the phonee??
pls help iam noob
what are u saying while into recovery i should connect phone to computer
ipfreelytech said:
sdcard is irrelevant. this phone doesn't even have an sdcard.
did you flash cwm or twrp recovery? if not then do so.
then you install the rom using install from sideload. with the command adb sideload rom.zip
Click to expand...
Click to collapse
how to sent package into phone
yes you connect the phone to the computer while in recovery
choose install zip from sideload in recovery
adb sideload zipname.zip that is the command you need to use. obviously replacing zipname.zip with the actual name of the zipfile you want to flash
shurahbil said:
are bro tell me step by step
ihave downloaded that system dump
now i have cwm recovery i can get into recovery but cannot boot the phonee??
pls help iam noob
what are u saying while into recovery i should connect phone to computer
Click to expand...
Click to collapse
ipfreelytech said:
yes you connect the phone to the computer while in recovery
choose install zip from sideload in recovery
adb sideload zipname.zip that is the command you need to use. obviously replacing zipname.zip with the actual name of the zipfile you want to flash
Click to expand...
Click to collapse
no package recieved
you're doing something wrong.
pate the entire output of your terminal
select install from sideload then do:
adb devices
adb sideload filename.zip
shurahbil said:
no package recieved
Click to expand...
Click to collapse
ipfreelytech said:
you're doing something wrong.
pate the entire output of your terminal
select install from sideload then do:
adb devices
adb sideload filename.zip
Click to expand...
Click to collapse
done thank u very much
but me getvar mani-version is blank!!!!!!!!!!!!!
there seems to be a bunch of people with that issue.
you should try and s-off and then do a full GPE conversion with the RUU
shurahbil said:
done thank u very much
but me getvar mani-version is blank!!!!!!!!!!!!!
Click to expand...
Click to collapse
ipfreelytech said:
there seems to be a bunch of people with that issue.
you should try and s-off and then do a full GPE conversion with the RUU
Click to expand...
Click to collapse
I am at stock now system dump link u have gaved
So will I get ota with main version blank
I heard people said using latest CWR recovery is the best. But TWRP is fine for me. If you s-off, you can put the phone in fastboot (power+vol down) mode and RUU it.
shurahbil said:
i have stucked on on boot on arhd 5.1 google edition
i have no other rom in my sdcard only ge 5.1
and phone reboots suddenly after the choose language option comes i am s_on
and even i cannot s off to directly run ruu
and i even cannot put any rom in my sdcard
i have installed a rom manyy times but it reebots and reboots and reboots??
help guys
Click to expand...
Click to collapse

[Q] HELP with updating HTC One to 4.4...

Hello, I have a rooted international HTC One currently running 4.3 Android with Sense 5.0. I am trying to perform an OTA system update that I have received... I downloaded the new 4.4 Android (1.1 GB) and I have selected "Install Update". But when the phone restarts, it just enters recovery and opens TWRP by itself!
So then I try to flash the downloaded OTA file via TWRP, but that also fails... Does anyone know how I can get 4.4 on my HTC One? Thank you
arbank94 said:
Hello, I have a rooted international HTC One currently running 4.3 Android with Sense 5.0. I am trying to perform an OTA system update that I have received... I downloaded the new 4.4 Android (1.1 GB) and I have selected "Install Update". But when the phone restarts, it just enters recovery and opens TWRP by itself!
So then I try to flash the downloaded OTA file via TWRP, but that also fails... Does anyone know how I can get 4.4 on my HTC One? Thank you
Click to expand...
Click to collapse
You can't apply ota with a custom recovery, you need your stock recovery.
arbank94 said:
Hello, I have a rooted international HTC One currently running 4.3 Android with Sense 5.0. I am trying to perform an OTA system update that I have received... I downloaded the new 4.4 Android (1.1 GB) and I have selected "Install Update". But when the phone restarts, it just enters recovery and opens TWRP by itself!
So then I try to flash the downloaded OTA file via TWRP, but that also fails... Does anyone know how I can get 4.4 on my HTC One? Thank you
Click to expand...
Click to collapse
Depending on whats been done to the phone you can eather flash stock recovery and try the update from their or you have to ruu back to stock and take the update that way.
fastboot getvar all will tell you what stock recovery you need or what ruu to use
alray said:
You can't apply ota with a custom recovery, you need your stock recovery.
Click to expand...
Click to collapse
So would you recommend getting stock recovery following nkk71's guide in your signature, or should I just flash a 4.4 rom?
arbank94 said:
So would you recommend getting stock recovery following nkk71's guide in your signature, or should I just flash a 4.4 rom?
Click to expand...
Click to collapse
Do what cIsA said. Check the output of "fastboot getvar all". Look at your main-ver # and find the corresponding stock recovery. There is a thread in general section with a collection of stock recovery.
You can post the output of getvar here minus imei/sn and we will link you the correct recovery.
Okay so I ran a fastboot getvar all, and apparently there is no RUU for my device, because it is Latin American with a CID of HTC_332. (I searched almost everywhere)
Now, after flashing a 4.4 rom I downloaded, my HTC device wasn't turning on anymore (it was getting stuck at the HTC boot logo). So I restored from a backup I made in TWRP, and that didn't work either. So now my problem just got 1000x worse because of a mistake I just made now of completely wiping my device and the OS.
So for the moment I'll try to flash a new boot.img, get S-OFF again, and change the CID to 11111111 (as I have read) where I will then download a RUU I can use. I'll let you know what happens.
Whoa there.. No need to flash boot.IMG.
What's you're steps? I think you are about to make it worse
sent from my mobile device
Okay well I'm in a tight situation atm.
My phone is completely wiped, with no OS or anything. The only thing I have access to is fastboot, and the TWRP bootloader. Also considering my phone is wiped, I believe I have S-ON as well.
So what is the first step to just get a boot going? (unless I'm not completely screwed that is..)
EDIT- I have successfully flashed Android Revolution to my phone from TWRP by pushing the zip via adb fastboot. Got my phone running again. Step 1 complete.
Step 2 now is to get S-OFF again...
Step 3- Change my CID to 11111111 using the SuperCID method (there is no RUU for my Latin American CID; HTC_332)
Step 4- Use an appropriate RUU to get 4.4 stock after I have changed my CID.
Before I continue with these steps, can anyone confirm with me if I am on the right path?
Step 2 - Confirmed.
Step 3 & Step 4 ... What is an appropriate RUU? You have not yet posted a fastboot getvar all output yet. (remove imei)
SaHiLzZ said:
Step 2 - Confirmed.
Step 3 & Step 4 ... What is an appropriate RUU? You have not yet posted a fastboot getvar all output yet. (remove imei)
Click to expand...
Click to collapse
I had the same cid when I bought mine. Irc, MID was PN0711000 with s.w. X.XX.599.X.
so he could use the 1.29.401.2 ruu on htc1guru but he have to change cid.
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
arbank94 said:
EDIT- I have successfully flashed Android Revolution to my phone from TWRP by pushing the zip via adb fastboot. Got my phone running again.
Before I continue with these steps, can anyone confirm with me if I am on the right path?
Click to expand...
Click to collapse
You could just stay with arhd, its a very good rom...
alray said:
You could just stay with arhd, its a very good rom...
Click to expand...
Click to collapse
Agreed!:laugh:
alray said:
I had the same cid when I bought mine. Irc, MID was PN0711000 with s.w. X.XX.599.X.
so he could use the 1.29.401.2 ruu on htc1guru but he have to change cid.
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
You could just stay with arhd, its a very good rom...
Click to expand...
Click to collapse
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>adb push htcrom2.zip /sdcard/
3455 KB/s (1180577030 bytes in 333.659s)
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH392W901414
(bootloader) imei: **************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__332
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e0349bfc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
So yeah... there's no RUU as I said.
alray, in order to use that 1.29.401.2 RUU, what do I have to change my CID to?
EDIT: I'll just stick with your suggestion alray and stay with ARHD lol. (but in case I change my mind, what CID should I change to for that RUU?... so that I won't have to bump this thread or make a new one later)
arbank94 said:
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>adb push htcrom2.zip /sdcard/
3455 KB/s (1180577030 bytes in 333.659s)
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH392W901414
(bootloader) imei: **************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__332
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e0349bfc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
So yeah... there's no RUU as I said.
alray, in order to use that 1.29.401.2 RUU, what do I have to change my CID to?
EDIT: I'll just stick with your suggestion alray and stay with ARHD lol. (but in case I change my mind, what CID should I change to for that RUU?... so that I won't have to bump this thread or make a new one later)
Click to expand...
Click to collapse
These CID:
HTC__001
HTC__J15
HTC__A48
HTC__M27
are compatible with the 1.29.401.2 ruu.zip so i'll suggest you to use HTC__001 if you change your mind. Personally, I would stay on ARHD. No benefit to flash that RUU vs ARHD. ARHD is always up to date...

No mobile connectivity after flashing ROM, NEED a fresh start

I recently flashed CM11 on my HTC one sprint to find out that there was no data connectivity, I was able to make calls and send text just not refresh apps over 3g etc. I did a factory reset and then tried flashing over CM 10 and still nothing. Went back and fourth and nothing. Tried Viper ROM and took everything off my phone and had to reinstall CWM onto it. Loaded CM 10 and 11 back onto it and still nothing. Tried GURU Reset method and the touch doesnt work but can still see theres no connection not even phone calls anymore. Is there a way to fix this or be able to start fresh. I dont care if I lose root, ill do it again, I just need my phone to work again.
Thanks for your help,
Tim
Tim, please state output of your fastboot getvar all
SaHiLzZ said:
Tim, please state output of your fastboot getvar all
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.651.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FAxxxxxxx
(bootloader) imei: xxxxxx
(bootloader) meid:xxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3836mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Do not lock bootloader. What guru file did you us
sent from my mobile device
---------- Post added at 11:50 PM ---------- Previous post was at 11:47 PM ----------
http://forum.xda-developers.com/showthread.php?t=2658910
Download the zip file but do not proceed just yet
sent from my mobile device
SaHiLzZ said:
Do not lock bootloader. What guru file did you us
sent from my mobile device
Click to expand...
Click to collapse
Both the sprint version in the tutorial (1.29 and 1.30). And no I didnt lock bootloader. still says "unlocked" at the top.
SaHiLzZ said:
Do not lock bootloader. What guru file did you us
sent from my mobile device
---------- Post added at 11:50 PM ---------- Previous post was at 11:47 PM ----------
http://forum.xda-developers.com/showthread.php?t=2658910
Download the zip file but do not proceed just yet
sent from my mobile device
Click to expand...
Click to collapse
alright its all downloaded...
You can do:
1. Post in HTC One Sprint Q&A: http://forum.xda-developers.com/sprint-htc-one/help
2. Adb push/sideload: http://forum.xda-developers.com/showpost.php?p=50561404&postcount=2
3. Flash Sprint_HTC_One_m7wls_4.06.651.4_RUU.zip from http://forum.xda-developers.com/showthread.php?p=50561404#post50561404, but you will need to lock bootloader, and with touch not working, if this RUU Zip doesn't work you, say good bye.
SaHiLzZ said:
You can do:
1. Post in HTC One Sprint Q&A: http://forum.xda-developers.com/sprint-htc-one/help
2. Adb push/sideload: http://forum.xda-developers.com/showpost.php?p=50561404&postcount=2
3. Flash Sprint_HTC_One_m7wls_4.06.651.4_RUU.zip from http://forum.xda-developers.com/showthread.php?p=50561404#post50561404, but you will need to lock bootloader, and with touch not working, if this RUU Zip doesn't work you, say good bye.
Click to expand...
Click to collapse
awesome thank you so much!
;;
SaHiLzZ said:
You can do:
1. Post in HTC One Sprint Q&A: http://forum.xda-developers.com/sprint-htc-one/help
2. Adb push/sideload: http://forum.xda-developers.com/showpost.php?p=50561404&postcount=2
3. Flash Sprint_HTC_One_m7wls_4.06.651.4_RUU.zip from http://forum.xda-developers.com/showthread.php?p=50561404#post50561404, but you will need to lock bootloader, and with touch not working, if this RUU Zip doesn't work you, say good bye.
Click to expand...
Click to collapse
with the abd/slideload do i install the zip in CWM just like I did for CM11?? and what one should i use between Odexed vs. Deodexed im not quit sure the diffrence
Use either odex or de-odex

[Q] Switching To Developers Edition

Hey, Im s-off on bell mobility in canada. Hboot 1.57. Was wondering what my best way to change over to a developers edition would be>
Howie3045 said:
Hey, Im s-off on bell mobility in canada. Hboot 1.57. Was wondering what my best way to change over to a developers edition would be>
Click to expand...
Click to collapse
I changed my India Rom to US dev edition Rom
1 S Off
2 Install TWRP
3 use Aroma MID changer tool change MID to PN0712000
4 change CID BS_US001
5 now flash any US dev edition firmware
6 Flash RUU of US dev edition
yatindroid said:
I changed my India Rom to US dev edition Rom
1 S Off
2 Install TWRP
3 use Aroma MID changer tool change MID to PN0712000
4 change CID BS_US001
5 now flash any US dev edition firmware
6 Flash RUU of US dev edition
Click to expand...
Click to collapse
which firmware should i install if i am using this ruu.exe http://www.htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_brightstarus_wwe_4-19-1540-9_radio_4a-23-3263-28_10-38r-1157-04l_release_353887_signed_3-exe/
my htc one isnt a dual sim. its the bell mobility one
Howie3045 said:
which firmware should i install if i am using this ruu.exe http://www.htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_brightstarus_wwe_4-19-1540-9_radio_4a-23-3263-28_10-38r-1157-04l_release_353887_signed_3-exe/
my htc one isnt a dual sim. its the bell mobility one
Click to expand...
Click to collapse
if you flash the 3.22.1540.1 decrypted ruu from htcguru.com, you dont need to flash the firmware, just follow yatin's instructions. firmware is included in the ruu.
alray said:
if you flash the 3.22.1540.1 decrypted ruu from htcguru.com, you dont need to flash the firmware, just follow yatin's instructions. firmware is included in the ruu.
Click to expand...
Click to collapse
where would i find these instructions. would love some sort of guide so i dont mess this up lol.
Howie3045 said:
where would i find these instructions. would love some sort of guide so i dont mess this up lol.
Click to expand...
Click to collapse
yatin and me can assist you in this thread.
first post the output of "fastboot getvar all" so we can determine what steps are required for you to do the conversion. dont post your IMEI nor the SERIALNO strings of your getvar
alray said:
yatin and me can assist you in this thread.
first post the output of "fastboot getvar all" so we can determine what steps are required for you to do the conversion. dont post your IMEI nor the SERIALNO strings of your getvar
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4152mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Howie3045 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4152mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
1st change cid to BS_US001
Flashing Firmware 3.22.1540.1
fastboot oem rebootRUU
fastboot flash zip firmware.zip (2 times)
fastboot flash zip firmware.zip
fastboot reboot-bootloader
after that Run RUU 4.19.1540.9 then update OTA
Howie3045 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4152mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
ok in your case, this will be very easy :good:
first backup every important file (if any) from your phone to your computer, everything will be wiped, including your sdcard content (picture, song, video)
reboot phone in bootloader mode by holding power and volume down
when in bootloader, open a terminal window from your fastboot/adb folder and type:
Code:
fastboot oem writecid BS_US001
fastboot reboot-bootloader
then download this ruu and save it to your adb/fastboot folder. you can rename it ruu (ruu.zip), it will be easier in the terminal.
with phone still on bootloader mode, from the terminal window type:
Code:
fastboot oem rebootRUU
make sure "RUU" in rebootRUU are capital letters. you will now see a black screen with silver htc logo
type:
Code:
fastboot flash zip ruu.zip
it will say something like: "failed, flush image again immediately" so do the same command again:
Code:
fastboot flash zip ruu.zip
then
Code:
fastboot reboot
now your phone will boot normally (first boot can take longer than usual).
when phone is booted, go trough the setup process and then go in settings ---> phone ---> software update.
download and install each ota update from 3.22.1540.1 to 6.07.1540.1 (6 updates total)
or you can proceed like @yatindroid said, 2 differents ways for the same result. both method will works.
alray said:
ok in your case, this will be very easy :good:
first backup every important file (if any) from your phone to your computer, everything will be wiped, including your sdcard content (picture, song, video)
reboot phone in bootloader mode by holding power and volume down
when in bootloader, open a terminal window from your fastboot/adb folder and type:
Code:
fastboot oem writecid BS_US001
fastboot reboot-bootloader
then download this ruu and save it to your adb/fastboot folder. you can rename it ruu (ruu.zip), it will be easier in the terminal.
with phone still on bootloader mode, from the terminal window type:
Code:
fastboot oem rebootRUU
make sure "RUU" in rebootRUU are capital letters. you will now see a black screen with silver htc logo
type:
Code:
fastboot flash zip ruu.zip
it will say something like: "failed, flush image again immediately" so do the same command again:
Code:
fastboot flash zip ruu.zip
then
Code:
fastboot reboot
now your phone will boot normally (first boot can take longer than usual).
when phone is booted, go trough the setup process and then go in settings ---> phone ---> software update.
download and install each ota update from 3.22.1540.1 to 6.07.1540.1 (6 updates total)
or you can proceed like @yatindroid said, 2 differents ways for the same result. both method will works.
Click to expand...
Click to collapse
with your method i dont have to flash firmware first? just change the CID and flash the RUU? I noticed my MID is the same as the Developer Edition anyway.
i wanna say thanks. sure i can click a button but i want you guys to know you've been very help and i appreciate it. ive been pulling my hair out with this phone every since i rooted it. I think after i do this ill be back to where i want to be. Id love to be Bell stock again but i find bell stuff hard too find. Developers Edition shud suit me just fine
Howie3045 said:
with your method i dont have to flash firmware first? just change the CID and flash the RUU? I noticed my MID is the same as the Developer Edition anyway.
Click to expand...
Click to collapse
yes you can try this way but if RUU give error try you need flash firmware
yatindroid said:
yes you can try this way but if RUU give error try you need flash firmware
Click to expand...
Click to collapse
where can i grab that firmware just in case
Howie3045 said:
with your method i dont have to flash firmware first? just change the CID and flash the RUU? I noticed my MID is the same as the Developer Edition anyway.
Click to expand...
Click to collapse
exactly.
MID is already correct
just change mid to BS_US001
and flash the 3.22.1540.1 ruu.
advantage of my method is that its simpler
disadvantage is that its an old version and you'll have to download and install 6 ota updates.
advantage of yatin's method is that its a less old version and will only require 2 ota updates
disadvantage (not really big disadvantage) is to flash the firmware first, if not the ruu.exe will not flash. Personally i don't use 4.xx.xxx.x RUU because I never found any clue that they are official ruu released by HTC (not on their website). But it seem to works fine, I think yatin converted his phone using that ruu
both solution are good, just make sure you flash the right firmware if you go with the 4.xx.1540 ruu
alray said:
exactly.
MID is already correct
just change mid to BS_US001
and flash the 3.22.1540.1 ruu.
advantage of my method is that its simpler
disadvantage is that its an old version and you'll have to download and install 6 ota updates.
advantage of yatin's method is that its a less old version and will only require 2 ota updates
disadvantage (not really big disadvantage) is to flash the firmware first, if not the ruu.exe will not flash. Personally i don't use 4.xx.xxx.x RUU because I never found any clue that they are official ruu released by HTC (not on their website). But it seem to works fine, I think yatin converted his phone using that ruu
both solution are good, just make sure you flash the right firmware if you go with the 4.xx.1540 ruu
Click to expand...
Click to collapse
bootloader will stay unlocked correct? i like simple lol. im downloading the RUU for your method now. I already have all my pictures backed up on a flash drive. ill have to back up a cpl other small things but ill prob give this a try tonight.
Howie3045 said:
bootloader will stay unlocked correct? i like simple lol. im downloading the RUU for your method now. I already have all my pictures backed up on a flash drive. ill have to back up a cpl other small things but ill prob give this a try tonight.
Click to expand...
Click to collapse
yes bootloader will stay unlocked and no need to relock it since dev edition phone came with an unlock bootloader from factory.
alray said:
yes bootloader will stay unlocked and no need to relock it since dev edition phone came with an unlock bootloader from factory.
Click to expand...
Click to collapse
I ran the RUU this morning. phone booted up fine. downloading first update as i type this. awesome. thank you guys so much
and updates are installing....very happy right now.
question though, once i get fully update to date with the dev edition, can i install TWRP and when any new updates come just install the stock recovery? i like using HTC One Tweaker and Sense 6 toolbox.
Howie3045 said:
and updates are installing....very happy right now.
question though, once i get fully update to date with the dev edition, can i install TWRP and when any new updates come just install the stock recovery? i like using HTC One Tweaker and Sense 6 toolbox.
Click to expand...
Click to collapse
if your bootloader is already unlocked, yes you can flash a custom recovery and then revert back to the stock 6.07.1540.1 recovery and install ota.
if your bootloarder is locked, you'll need to unlock it in order to flash a custom recovery and that will wipe /data/preload files and you'll will not be able to install ota directly.
to install ota, you need:
stock recovery
untouched /data/preload files
untouched /system files
Best thing to do is to make a nandroid backup right after flashing twrp. So if some /system files get modified (with a custom kernel for example) you'll be able to restore the backup, flash the stock recovery and install ota.
in last resort you can always flash your phone back to stock with a ruu and apply all ota.
alray said:
if your bootloader is already unlocked, yes you can flash a custom recovery and then revert back to the stock 6.07.1540.1 recovery and install ota.
if your bootloarder is locked, you'll need to unlock it in order to flash a custom recovery and that will wipe /data/preload files and you'll will not be able to install ota directly.
to install ota, you need:
stock recovery
untouched /data/preload files
untouched /system files
Best thing to do is to make a nandroid backup right after flashing twrp. So if some /system files get modified (with a custom kernel for example) you'll be able to restore the backup, flash the stock recovery and install ota.
in last resort you can always flash your phone back to stock with a ruu and apply all ota.
Click to expand...
Click to collapse
im back up and running with all updates. i just ran the RUU u suggested so i assume my bootloader should still be unlocked. i didnt relock it or anything

[SOLVED]HTC one M7 - Not Starting - Issue while updating to Lollipop

I have tried updating the htc one m7 to lollipop and during installation phone went into recovery mode. this is the getvar log from device. currently i have an unlocked bootloader.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.07.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4116mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
can some one guide on how to proceed forward?
One more issue is im unable to connect the phone to laptop. i have tried installing a custom ROM.
[email protected] said:
I have tried updating the htc one m7 to lollipop and during installation phone went into recovery mode. this is the getvar log from device. currently i have an unlocked bootloader.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.07.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4116mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
can some one guide on how to proceed forward?
One more issue is im unable to connect the phone to laptop. i have tried installing a custom ROM.
Click to expand...
Click to collapse
its very easy to fix, all you have to do is run the dev edition RUU again to make sure everything is fully stock for the update to work, however, your real issue is the fact it wont connect to your laptop, why not ? whats it doing ? what does device manager say ?
Ok. Connecting to computer im least bothered. I need it to be up and running.
I have unlocked bootloader, installed TWRP 2.7.1.1. Where can i get the dev edition RUU? Can i just run it from system by connecting phone in fastboot?
[email protected] said:
Ok. Connecting to computer im least bothered. I need it to be up and running.
I have unlocked bootloader, installed TWRP 2.7.1.1. Where can i get the dev edition RUU? Can i just run it from system by connecting phone in fastboot?
Click to expand...
Click to collapse
your computer needs to see the phone whilst the phone is in fastboot mode in the bootloader for anything to work, but the the updated lollipop RUU is here: http://forum.xda-developers.com/htc-one/general/guide-convert-m7-developer-edition-t2840311
Yeah, system is able to read commands from fastboot. So i have follow the 2nd part of the link above?
[email protected] said:
Yeah, system is able to read commands from fastboot. So i have follow the 2nd part of the link above?
Click to expand...
Click to collapse
yes just the 2nd part as your already on dev edition, if it fails, you may have to download and install the firmware first, due to you running a custom recovery, you can find the firmware here, thanks to @alray https://www.androidfilehost.com/?w=files&flid=20283, you will want the 6.07.1540.2 firmware which matches your version main.
I have connected the device in fastboot and ran the RUU, but it failed saying Recovery, and then it exited the process on computer. But my phone is still in the same silver htc logo, does it mean its installing or it failed to install? And BTW how do i install that firmware and also there a few versions if the same firmware!
If you can help me with sorting out this it would be of great help!! Thanks in advance for all the help till now...
[email protected] said:
I have connected the device in fastboot and ran the RUU, but it failed saying Recovery, and then it exited the process on computer. But my phone is still in the same silver htc logo, does it mean its installing or it failed to install? And BTW how do i install that firmware and also there a few versions if the same firmware!
If you can help me with sorting out this it would be of great help!! Thanks in advance for all the help till now...
Click to expand...
Click to collapse
here you go, easy way, download this: https://www.androidfilehost.com/?fid=95897840722641610 rename it to rom.zip for ease
place it in the same folder as adb and fastboot on your computer, then open a command window there. first you need to get out of RUU mode, so type fastboot reboot-bootloader, your phone should return to the bootloader screen, then enter recovery on your phone, hopefully twrp recovery still, then type adb push rom.zip /sdcard/, takes a while but it will let you know when its done, it will look like its doing nothing whilst its pushing.
unplug your phone and flash the rom, select stock radio and stock recovery when prompted, when the phone starts back up, check for updates, as you are s-on your bootloader will need to be relocked to update.
Thanks man for the help.
let me try and install that thing. Need to know why to relock the boot loader? and how can i relock it?
[email protected] said:
Thanks man for the help.
let me try and install that thing. Need to know why to relock the boot loader? and how can i relock it?
Click to expand...
Click to collapse
just type fastboot oem lock with your phone in fastboot mode, if you need to unlock in the future, just use the unlock token again or goto HTC Dev to get a new one.
Can i locck it belore running RUU or flashing rom?
[email protected] said:
Can i locck it belore running RUU or flashing rom?
Click to expand...
Click to collapse
no, it needs to be unlocked for flashing the reset rom in order to use the custom recovery.
locked / re-locked for running RUU
C:\Users\USER\Desktop\OneDrivers_Fastboot\Fastboot>adb push rom.zip /sdcard/
error: device not found
Im getting this on pushing from recovery mode. How can i resolve this?
[email protected] said:
C:\Users\USER\Desktop\OneDrivers_Fastboot\Fastboot>adb push rom.zip /sdcard/
error: device not found
Im getting this on pushing from recovery mode. How can i resolve this?
Click to expand...
Click to collapse
when your phone is in recovery, have a look in device manager, see what it says for your phone ?
Its not able to find my device properly. Attaching it
[email protected] said:
Its not able to find my device properly. Attaching it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=52135024
See Question (2 in this faq post to fix your drivers
That worked great man!! I have pushed it to device and now installing.
Its been 10 mins and i can still see the Installing bar running with 0.00%.. Is it correct or abnormal?
[email protected] said:
That worked great man!! I have pushed it to device and now installing.
Its been 10 mins and i can still see the Installing bar running with 0.00%.. Is it correct or abnormal?
Click to expand...
Click to collapse
no that doesnt sound right, has it done anything in aroma, like wipe partitions etc ?
Seanie280672 said:
your computer needs to see the phone whilst the phone is in fastboot mode in the bootloader for anything to work, but the the updated lollipop RUU is here: http://forum.xda-developers.com/htc-one/general/guide-convert-m7-developer-edition-t2840311
Click to expand...
Click to collapse
Seanie280672 said:
no that doesnt sound right, has it done anything in aroma, like wipe partitions etc ?
Click to expand...
Click to collapse
I have choose to wipe partition. Shall i not?
[email protected] said:
I have choose to wipe partition. Shall i not?
Click to expand...
Click to collapse
yes you should, but has the aroma installer done that part yet is what im asking ?

Categories

Resources