Related
..In picking out which is the best droid setup for me.
I was here months back when I setup droid on my Vogue(US Cellular) and over the course of a couple days of trying out different builds and testing, I found that Warm Doughnut was the best working one for me at the time. Unlike the Froyo build on here that I tried, doughnut's data connection worked fine (and right away) without any setup at all whereas I couldn't get it running for the life of me on Froyo.
However, I'm wanting to swap out past doughnut now to a more updated version of Android. Which would you all recommend? I've been reading some good reviews on the Gingerbread build... However, I'm worried about calls/sms/data and all of the other features... Which are working which aren't?
I'd have to have them all working (like current setup on doughnut) to make the switch, else it'll just be pointless for me.
Now I ask the same of the FroYo build on here. Before it worked fine for me, except the data functions... I couldn't get it to connect at all for the life of me.
So, I ask of you all with more experience with this phone than me. What would you suggest? What works for you? Doughnut, Froyo, or Gingerbread?
I want to get Froyo running if I can (about to put it back on and give it a go) but not having a data connection will kill the idea for me. And even better would be if I can get Gingerbread running, but only if I can get in/outgoing calls, sms, data, (gps hopefully) and bluetooth.
Thanks in advance for any/all support you guys can give me!
Superfroyo seems very stable and functional to me. I'm on Sprint. Even MMS works though you have to fiddle with it. Gingerbread's not all there yet stabilitywise.
goducks3620 said:
Superfroyo seems very stable and functional to me. I'm on Sprint. Even MMS works though you have to fiddle with it. Gingerbread's not all there yet stabilitywise.
Click to expand...
Click to collapse
Thanks for the reply! I felt the same when I tried it out months ago, my only issue is getting the data running... Did you have to fiddle with yours a lot to get it working? I know you're on Sprint and I'm on US Cellular, but from what I can tell the two shouldn't be that different to setup. Maybe I didn't give it enough time/work before to get data running (or maybe I was doing it wrong).
Also, I'm going to be using it from my SD card (like I have previously) for a while and make sure its solid before I think about wiping my WM6.1 off and replacing it altogether. Doughnut worked fine off of the SD card, I'm assuming Froyo will as well? Didn't give it too much time before, but when I did have it going on the SD card before I didn't notice it chugging along at all.
Another thing, do I have to use WM6.5 to get this going, or is it ok using WM6.1 like I am? Would prefer not to have to redo (and backup all that nonsense) for my 6.1 if I don't have to.
I totally wiped windows mobile and run off nand. It's snappy enough and data worked straight off. No fiddling.
Sent from my Full Android on Vogue using XDA App
Well, got Froyo running... But no data running yet... Enabled Data, enabled data while roaming (roaming majority of the time anyways) and nothing yet...
Ideas anyone?
M 5hizzle said:
Well, got Froyo running... But no data running yet... Enabled Data, enabled data while roaming (roaming majority of the time anyways) and nothing yet...
Ideas anyone?
Click to expand...
Click to collapse
The typical question is: does it work in winmo?
My girlfriends D3 has gradually been getting worse with poor reception, dropping calls, not being able to make/receive calls or texts.
Data seems to work fine. This weekend it just finally stopped being able to make calls or send texts from our home.
If i drive a few miles down the road or to a higher elevation i was barely able to call *228 to update roaming.
I can still use the browser over 3G and Wifi, just no tethering, phone or text.
The phone shows 3G and a full signal, but as soon as i initiate a call it drops to 1 bar.
Another thing we noticed this morning is that when calling the phone it goes straight to voicemail.
I had tried changing the Network mode from Global to CDMA yesterday and at one point got an error message saying "No CDMA networks were found. Would you like to switch to Global Mode?"
Phone has been rebooted and battery pulled along with some other diagnostic tests that the verizon techs did over the phone yesterday.
The only thing i had done to this phone was i applied the TBH tethering hack without root over a year ago. It worked fine up until now.
The phone has the latest System version 5.7.906.XT862 and the latest Baseband N_03.18.32P.
Im thinking of reverting the TBH Tethering hack back using the instructions in this post
I spoke to Verizon tech support yesterday and they said there was some trouble in our area, but my Droid X is still able to connect so i doubt thats the issue.
Does anyone think that an OTA update from Verizon may have screwed something up due to the TBH hack being applied?
The GF is frantic about getting her phone back. I can take out insurance for 6.99 pr/month and pay $100 to get her a new phone, but if reverting the TBH hack and maybe rooting and installing a new ROM might help, im all for it.
Any thoughts? ROM advice? Was reading up about the AOKP Build 40 ROM, but wondering if all the hoop jumping will help or if the D3 has a hardware issue that has just got progressively worse.
Wont you help a poor guy keep the peace with his lady please?
I don't think it's that. It's possible that the 3G in the area is good but 1x is crap. 3G is just used for data while calls/texts are used on 1x. What is the PRL versions your phone and her phone have?
MrObvious said:
I don't think it's that. It's possible that the 3G in the area is good but 1x is crap. 3G is just used for data while calls/texts are used on 1x. What is the PRL versions your phone and her phone have?
Click to expand...
Click to collapse
My Droid X running on VXLR V2.2.0: PRL 53018
Her Droid 3 Stock w/TBH Tethering Hack: PRL 52996
Just tried updating them both and the PRL's stayed the same.
About an hour ago i was in the middle of backing up her phone and it started ringing. I was able to answer the call and now im able to make and receive texts and calls. There must have been a tower issue. The signal still drops to 2 bars when i initiate a call, but at least its working again.
She says its been flaky for quite a while with dropping calls and texts not getting sent. Im all backed up and was thinking of rooting and trying a ROM on this. Not sure if itll help with signal issues, dropped calls or texts not being sent or received.
She was also complaining about the thing pocket dialing, and other random stuff happening like her browser launching and texts being sent etc. I saw it this morning. I picked up her phone to bring it downstairs and saw that there was a text reply box open with a bunch of jibberish typed in it. She says that sort of thing happens all the time.
Think maybe a good stable ROM might help?
After a little more research i came across Minimoto here at XDA. Minimoto Link
Seems to be the way to go if im sticking to a GB ROM. I see you contributed some to it. Would you happen to know where some step by step instructions for getting it installed on a non rooted D3 might be?
1) Root it.
2) Install Safestrap 3.05.
3) Reboot to it, create ROM-Slot 1.
4) Factory reset and wipe cache and delvik.
5) Flash the ROM.
6) Set her up with goodness.
Though if random crap is popping up, I suspect the digitizer is flaky.
MrObvious said:
1) Root it.
2) Install Safestrap 3.05.
3) Reboot to it, create ROM-Slot 1.
4) Factory reset and wipe cache and delvik.
5) Flash the ROM.
6) Set her up with goodness.
Though if random crap is popping up, I suspect the digitizer is flaky.
Click to expand...
Click to collapse
Have you heard of digitizer issues with D3's before?
Any recommendations on which rooting method to use?
Do i have to remove the TBH Tether hack before rooting, installing Safestrap or Flashing the ROM?
So i take it your in agreement that this would be a good choice for a stable no frills GB ROM?
the random stuff can be from from a bad digitizer, dirt/grime on digitizer/edge or a software conflict
try cleaning screen around the edge, and/or flash rom/sbf
you need to remove bootstrap before safestrap, tbh hack should be fine
i haven't use minmo, but many have, also you could look at
http://forum.xda-developers.com/showthread.php?t=2106722
use the Deodexed ROM (Courtesy of thingonaspring) link
sd_shadow said:
the random stuff can be from from a bad digitizer, dirt/grime on digitizer/edge or a software conflict
try cleaning screen around the edge, and/or flash rom/sbf
you need to remove bootstrap before safestrap, tbh hack should be fine
i haven't use minmo, but many have, also you could look at
http://forum.xda-developers.com/showthread.php?t=2106722
use the Deodexed ROM (Courtesy of thingonaspring) link
Click to expand...
Click to collapse
Thanks sd_shadow I think ill stick with minimo most likely. Too many dam ROMS to choose from!.
Ok so from the hours of reading i did yesterday, i found a working link for motofail. It appears it is the best (or only) way to root the D3 if on 906.
From there i thought i could just install Safestrap 3.05 which i managed to track down as well.
I never installed Bootstrap, so does this even apply? Is there a factory bootstrap included with the D3?
I believe i read that minimoto has its own tethering feature included. So are we sure i dont have to revert the TBH tethering hack?
Some great links in your signature by the way. If the digitizer keeps acting up, i may try replacing it. I did clean it last night and will see if things improve.
LOTL said:
Thanks sd_shadow I think ill stick with minimo most likely. Too many dam ROMS to choose from!.
I think your the only person to say that for the d3 lol. Most of us are flash- a-holics and we love lots of roms to chose from.
Ok so from the hours of reading i did yesterday, i found a working link for motofail. It appears it is the best (or only) way to root the D3 if on 906.
From there i thought i could just install Safestrap 3.05 which i managed to track down as well.
I never installed Bootstrap, so does this even apply?
Just install safestrap on your safe system after root don't worry about bootstrap.
Is there a factory bootstrap included with the D3?
No
I believe i read that minimoto has its own tethering feature included. So are we sure i dont have to revert the TBH tethering hack?
No you do not have to undo the tether hack it is a hardwear hack not a software hack and will work on any rom no matter if the rom already has tethering in it.
Some great links in your signature by the way. If the digitizer keeps acting up, i may try replacing it. I did clean it last night and will see if things improve.
Click to expand...
Click to collapse
Sent from my DROID3 using XDA
replacing the digitizer is a pain
some [how to] links in my list
Is anyone else that's running CM10.2 on Droid 4 having data connection issues? Have you fixed them? If so, how? Does the code need to bake a while longer before data starts working?
I'm running CM 10.22010831-NIGHTLY-maserati
WIFI is working, but I can't get data to work otherwise. I did a factory reset and started fresh. I've tried flashing the ROM and gapps package multiple times. I wiped cache and Dalvik. I tried repairing permissions.
Any Ideas?
Thanks,
Marty
martygwilliams said:
Is anyone else that's running CM10.2 on Droid 4 having data connection issues? Have you fixed them? If so, how? Does the code need to bake a while longer before data starts working?
I'm running CM 10.22010831-NIGHTLY-maserati
WIFI is working, but I can't get data to work otherwise. I did a factory reset and started fresh. I've tried flashing the ROM and gapps package multiple times. I wiped cache and Dalvik. I tried repairing permissions.
Any Ideas?
Thanks,
Marty
Click to expand...
Click to collapse
Try the 9/2 build. No issues yet.
Sent from my XT894 using xda app-developers app
rruleford said:
Try the 9/2 build. No issues yet.
Sent from my XT894 using xda app-developers app
Click to expand...
Click to collapse
Tried that and still no love.
I think i need to update my baseband radio, but I can't find a more recent baseband version for the Droid 4.
I'm currently using CDMA_N_05.11.01P LTEDC_U_09.11.00.
Anyone have a link for a newer version or any idea how to get one?
Thanks,
Marty
Do u have the issue on stock rom slot? If so then take it back to stock with the latest utility floating around the forum. Check for system updates if there is one dl and install to make sure u have latest radio if problem persist then it's a Good possibility it's A coverage issue or hardware related problem..
Sent from my XT894 using xda app-developers app
rruleford said:
Do u have the issue on stock rom slot? If so then take it back to stock with the latest utility floating around the forum. Check for system updates if there is one dl and install to make sure u have latest radio if problem persist then it's a Good possibility it's A coverage issue or hardware related problem..
Sent from my XT894 using xda app-developers app
Click to expand...
Click to collapse
Ok, here's where I'm at now.
I updated my stock rom. baseband is now at 5.25.00. Still won't work on CM10.2.
3g will work on my stock ROM, but not on CM.
I've screwed with the mobile network settings and I can't get any difference in results.
LTE works great with CM10.2, but as soon as I'm in 3g territory, I'm dead in the water. I can receive and place voice calls and I get text messages through the messaging app, but anything that requires an actual data connection, like google voice or the browser, it won't work.
Help!?
updated PRL, still no love.
In some versions i needed to add APN manually, then it would work. In earlier version i had the same problem that 3g would not work. Also problem with reception bars - it would always show like 1 bar or smth like this but would work just fine.
jannox1 said:
In some versions i needed to add APN manually, then it would work. In earlier version i had the same problem that 3g would not work. Also problem with reception bars - it would always show like 1 bar or smth like this but would work just fine.
Click to expand...
Click to collapse
It already has several APNs set up. The one I have selected is: APN: vzwinternet, MCC:311, MNC:480. Most everything else isn't set.
Thanks,
Marty
Set adrift without data.
Day 10: I've run out of water. The sea gulls... they mock me... with their wings... and beaks... and of course their raucous calls. They are scheming against me. My only friend is the lone shark that circles me constantly. He's attentive like that. A bit forward though. Keeps trying to kiss me. I tell him "NO KISSES FOR YOU! Not until the second date."
Also, still no data.
martygwilliams said:
Set adrift without data.
Day 10: I've run out of water. The sea gulls... they mock me... with their wings... and beaks... and of course their raucous calls. They are scheming against me. My only friend is the lone shark that circles me constantly. He's attentive like that. A bit forward though. Keeps trying to kiss me. I tell him "NO KISSES FOR YOU! Not until the second date."
Also, still no data.
Click to expand...
Click to collapse
First off, thanks for the chuckle
Secondly, you're getting no data at all? Are you on Verizon? If so, do you have LTE in your area? My personal experience has been LTE data is working fine but 3G has been REAL spotty. I did see dhacker on twitter post a new razr build with some 3G tweaks he was testing. So that is being worked on and should filter down to us when it does get figured out.
kwyrt said:
First off, thanks for the chuckle
Secondly, you're getting no data at all? Are you on Verizon? If so, do you have LTE in your area? My personal experience has been LTE data is working fine but 3G has been REAL spotty. I did see dhacker on twitter post a new razr build with some 3G tweaks he was testing. So that is being worked on and should filter down to us when it does get figured out.
Click to expand...
Click to collapse
3G was working fine on 10.1, but is nonexistent on 10.2. It actually acts like it wants to connect to a roaming tower if I switch it to GSM, but it can only see it and won't pass traffic.
I could just go back to 10.1 or run stock, but my pigheadedness, that's a word now, won't allow it.
On the brighter side, I am learning a great deal more about my phone that I had previously known.
The problem seemed to rectify itself around the nightly build on 9-15 or 9-16.
I know I'm a bit late, but I always do the * # * # 4636 # * # * in dialer and I turn off the radio, set the radio to cdma/lte and turn it back on, usually it isn't letting all those other antennas run and it seems to pick 4G LTE faster in my experience.
I think it's a CM10.2 issue...
Hi, my friend with a Galaxy S3 is having the exact same data retention issues we are having on our Droid 4's, which makes me think this is a bug in CM10.2 on various devices more than an issue with our phones. I can get LTE data when I have service, but find that once I loose service, even for a moment, the phone then never re-connects to LTE again and just sits there with white bars instead. Toggling data or airplane mode seems to usually trick it into reconnecting to LTE, but it is becoming annoying to have to constantly check and toggle around to get data back. I've tried every nightly and the M1 and have found the issue remains through the 11/19 build. I've installed the ROM into slot1, I'm not sure if overwriting the stock ROM and using the stock slot with CM10.2 helps matters at all, has anyone had any experience with using CM10.2 in the stock slot instead of Sot 1?
Hi guys!
So I've been a lurker on here for forever (since my Touch Pro actually...whoa), but haven't participated much before now. Either way, I don't think I'm too much of a noob. However, today I took the plunge and rooted my One. I haven't messed around with this stuff since my Evo 4G so I tried to follow directions and do everything right. I then went to install a custom ROM (really a series of ROMs because of this mess), and everything seems to work well enough. However, when I got to set up my phone, the setup process hung on "Activate mobile data service" before telling me it couldn't connect. I figured it was just an error with the nightly I was using so I switched to another ROM and the same thing happened.
In this order, I've tried
Pac ROM
Liquid
Beanstalk
CM11
and have had the same issue every time. Clean flash and everything. I figured maybe it was an issue with CM based ROMs, but twrp fails every time I try to install AOKP and I haven't seen a real, current fix for this issue (tried changing APN), nor many people talking about any problems over the past few months.
Anybody that can help, I GREATLY appreciate it! I seriously don't know where to look now. I feel like I've searched everywhere but no luck.
EDIT: Additionally, I just tried to flash SlimKat. When it got to the "Activate mobile data service" it dialed a number which replied with "The feature code you have entered is not valid" .....WHAT?
I'm having a similar issue on my G2. I wasn't flashing ROMs, but was using an Xposed module. Wifi works, but mobile data does not. I just made a thread about this myself.
I've had this problem since CM 10.2 and have never found a resolution.
Whenever I lose wifi/lte/3g connection, be it leaving a wifi phone or going into an elevator or anything like that, I have to toggle airplane mode several times. I might get data back, if not, I have to reset the entire phone.
Safestrap 3.73 installed on Slot 1
Any recommendations, logs to view, etc?