CM Logo Only - Nook HD, HD+ Q&A, Help & Troubleshooting

CM Logo Only - Nook HD, HD+ Q&A, Help & Troubleshooting

http://forum.xda-developers.com/showthread.php?t=2389813
Guys, I tried to install the new stable 10.2 with the 10.2 SD image.
Guess it failed. Seems like CM 10.2 is now my stock, as Nook stock won't boot. Boot CM instead, but logo stuck.
Did this overwrite my EMMC?
It's now stuck at the CM logo.
What should I do next?
Thanks!

mpeg3s said:
http://forum.xda-developers.com/showthread.php?t=2389813
Guys, I tried to install the new stable 10.2 with the 10.2 SD image.
Guess it failed. Seems like CM 10.2 is now my stock, as Nook stock won't boot. Boot CM instead, but logo stuck.
Did this overwrite my EMMC?
It's now stuck at the CM logo.
What should I do next?
Thanks!
Click to expand...
Click to collapse
Sounds like you were wanting to run CM on SD. If that is the case you do not use ROM zips from CM. They are designed for emmc. You must use the ROM zips from verygreen's thread.
To fix your stock, go to my HD/HD+ CWM thread linked in my signature and flash the plain stock zip from item 6. If it still does not boot right, go back to CWM and do a factory reset.
Sent from my BN NookHD+ using XDA Premium HD app

I couldn't get the files to be Read from SDCARD because cwm didn't mount.
Anyways, other things happened after a Factory reset. I got CM 10.2 to work. Had no apps.
Luckily, I still had gapps on the internal EMMC.
After installing gapps for the second time it seems to work.
I still get the CWM SD booting, but it won't work anymore. How can I remove this old boot CWM for SD?
Thanks Again!
leapinlar said:
Sounds like you were wanting to run CM on SD. If that is the case you do not use ROM zips from CM. They are designed for emmc. You must use the ROM zips from verygreen's thread.
To fix your stock, go to my HD/HD+ CWM thread linked in my signature and flash the plain stock zip from item 6. If it still does not boot right, go back to CWM and do a factory reset.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse

mpeg3s said:
I couldn't get the files to be Read from SDCARD because cwm didn't mount.
Anyways, other things happened after a Factory reset. I got CM 10.2 to work. Had no apps.
Luckily, I still had gapps on the internal EMMC.
After installing gapps for the second time it seems to work.
I still get the CWM SD booting, but it won't work anymore. How can I remove this old boot CWM for SD?
Thanks Again!
Click to expand...
Click to collapse
I was mistaken when I told you to flash plain stock and wipe with your existing SD. When you did the factory reset with your existing SD it wiped the SD data. That is why you had no apps. You need to make a new SD from my thread so that you can flash the plain stock and factory reset with that one. That will put stock back on internal. Use a different SD if you want to keep your CM10.2 bootable SD.
Sent from my BN NookHD+ using XDA Premium HD app

A CWM SD is bootable with a different CWM image. Problem is the remnants of an old CWM SD image changed the EMMC.
Without the SD Card I still see it boot, but you can't use it because no boot option. It's a left over from the CWM SD-Hybrid boot I used to flash ROM.
So the EMMC 10.2 boot isn't clean.
Thanks!
leapinlar said:
I was mistaken when I told you to flash plain stock and wipe with your existing SD. When you did the factory reset with your existing SD it wiped the SD data. That is why you had no apps. You need to make a new SD from my thread so that you can flash the plain stock and factory reset with that one. That will put stock back on internal. Use a different SD if you want to keep your CM10.2 bootable SD.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse

mpeg3s said:
A CWM SD is bootable with a different CWM image. Problem is the remnants of an old CWM SD image changed the EMMC.
Without the SD Card I still see it boot, but you can't use it because no boot option. It's a left over from the CWM SD-Hybrid boot I used to flash ROM.
So the EMMC 10.2 boot isn't clean.
Thanks!
Click to expand...
Click to collapse
The problem is not only the CWM version that is on the SD, it is the ROM you were flashing. ROMs are hard coded to be put either on emmc or SD and it does not matter which CWM you use, it tries to put it on what is programmed to do. Now wiping is different. The CWM itself decides what is to be wiped, emmc or SD. That is why when you flashed that zip from the CM site with the CWM built for SD installs, it still put it on emmc instead of SD. But when you wiped, it wiped SD instead of emmc. That is why I told you to use a different SD with the CWM built for emmc to do the wiping of emmc.
Sent from my BN NookHD+ using XDA Premium HD app

Related

[Q] How to get out of honeycomb v4 running internal eMMC

I am running honeycomb for my nook color internally. I flashed it using clockwork mod recovery off the sd. but when i tried to flash back cm7, it didnt boot after i flashed it. help please.

wrong forum but try holding down the "n" nook button during the boot process.

Did you have Clockwork running on your SD card? Did you remove the SD card before you booted?

I am pretty new to this, so I may me wrong. But to me it sound like a you need to fix your boot partition.
I had the same problem which I fixed it by wiping my system/data/boot and restoring from a backup. Then installing the custom rom.
You could also try...
http://forum.xda-developers.com/showthread.php?p=11591197#post11591197
or
http://forum.xda-developers.com/showthread.php?t=945838

Yeah sorry for that. You can flash my repartition zip file in my nook color restore to stock thread (bottom)..
Then flash CM.
Sam
Sent from my Desire HD using XDA App

[Q] [Panic] HD+ stuck in bootloop HELP!

So, I just got a HD+ and I was ready to try out CM10.1 emmc.
I got all the required files and such ready.
I booted into CWM sdcard, and I forgot to take a backup, and I flashed TWRP recovery. I rebooted and now when I remove the sd card, it's stuck in a boot loop.
The nook logo comes up, the screen dims after a few seconds, and then it reboots, and repeats forever.
I tried flashing stock recovery from another thread this file : http://forum.xda-developers.com/showpost.php?p=41392480&postcount=4
Still nothing.
I backed everything else up AFTER flashing recovery. So if I can just fix this, I can take a proper backup and proceed with the CM10.1 install.
Thanks

First off, if you are interested in using the emmc recovery for making backups and restores, don't use TWRP. That feature is broken in that version.
If you want to go back to stock first so you can back it up, go to my HD/HD+ CWM thread linked in my signature and get my plain stock 2.1.0 from item 6 and flash that with your bootable CWM SD. That will put everything back to stock, including recovery.
Then just start over again with your bootable CWM card. Backup, then flash the CWM emmc recovery, the CM10.1 zip and gapps, wipe data and reboot.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
First off, if you are interested in using the emmc recovery for making backups and restores, don't use TWRP. That feature is broken in that version.
If you want to go back to stock first so you can back it up, go to my HD/HD+ CWM thread linked in my signature and get my plain stock 2.1.0 from item 6 and flash that with your bootable CWM SD. That will put everything back to stock, including recovery.
Then just start over again with your bootable CWM card. Backup, then flash the CWM emmc recovery, the CM10.1 zip and gapps, wipe data and reboot.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Nevermind, I just tried something and it worked. (Complete accident btw didn't know what I was doing)
I long pressed hom button while it was booting, and the Adobe disclaimer from the bottom dissapeared a blue bar started loading under the Nook logo. It loaded twice and then it booted up
Any idea what just happened?

prabhjan said:
Nevermind, I just tried something and it worked. (Complete accident btw didn't know what I was doing)
I long pressed hom button while it was booting, and the Adobe disclaimer from the bottom dissapeared a blue bar started loading under the Nook logo. It loaded twice and then it booted up
Any idea what just happened?
Click to expand...
Click to collapse
Yes, you booted into stock recovery it repaired itself.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Yes, you booted into stock recovery it repaired itself.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Oh, cool. Well it appears to have been factory reset, and it seems to have gone down to 2.0.0 or something (even though it came with 2.1.0 out of the box). Now it's running 2.0.6. It told me that 2.1.0 is available to update, and I started it. But it doesn't appear to be moving forward. Will come back on the status of that in a bit again.

prabhjan said:
Oh, cool. Well it appears to have been factory reset, and it seems to have gone down to 2.0.0 or something (even though it came with 2.1.0 out of the box). Now it's running 2.0.6. It told me that 2.1.0 is available to update, and I started it. But it doesn't appear to be moving forward. Will come back on the status of that in a bit again.
Click to expand...
Click to collapse
Yes that is how it repairs itself. But it needs the stock recovery to do that. Once you put that back, it took over and proceeded to reset itself.
Just let it do its thing.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Yes that is how it repairs itself. But it needs the stock recovery to do that. Once you put that back, it took over and proceeded to reset itself.
Just let it do its thing.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Sweet. Okay, I'm back to how it was when I first bought it. Going to put CM10.1 now.
Okay, so I need to take a backup first, then flash CWM, CM10.1, and then GApps. That's it right?

prabhjan said:
Sweet. Okay, I'm back to how it was when I first bought it. Going to put CM10.1 now.
Okay, so I need to take a backup first, then flash CWM, CM10.1, and then GApps. That's it right?
Click to expand...
Click to collapse
Yes. Then wipe data/factory reset.
Sent from my Nook HD+ running CM10.1 on emmc.

Okay, btw. I took the backup, and I selected reboot, before I proceeded with the flashing.
It asked me if I should flash stock recovery and if I should enable root access (I selected no for both as selecting yes was the cause of the problem before)

prabhjan said:
Okay, btw. I took the backup, and I selected reboot, before I proceeded with the flashing.
It asked me if I should flash stock recovery and if I should enable root access (I selected no for both as selecting yes was the cause of the problem before)
Click to expand...
Click to collapse
Why did you reboot?
You lost me on that last statement. What asked if you should enable root access? Something in stock?
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Why did you reboot?
You lost me on that last statement. What asked if you should enable root access? Something in stock?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Okay basically. I made two SD cards with CWM. One which I'll leave as a permanent backup card, and another with the other packages (it kept formatting to 856MB after I made it a bootable card no matter how big the actual card is, and so I couldnt fit both the backup and the CM10.1+Gapps zips on a single card)
I first made the backup on one card, and I hit reboot system, to swap it for the other one.
But when I pressed reboot, it asked me this:
ROM may flash stock recovery on boot. Fix?
THIS CAN NOT BE UNDONE.
-No
-No
-No
-No
-No
-No
-No
-Yes- Disable recovery flash
-No
-No
-No
I hit no.
Then it followed up with this:
Root access is missing. Root Device?
THIS CAN NOT BE UNDONE.
-No
-No
-No
-No
-No
-No
-No
-Yes - Root device (/system/xbin/su)
-No
-No
-No
I hit no for this too, since it didn't quite make sense.
So yeah. I'm pretty confused. Never ran into anything like that before on other devices.

prabhjan said:
Okay basically. I made two SD cards with CWM. One which I'll leave as a permanent backup card, and another with the other packages (it kept formatting to 856MB after I made it a bootable card no matter how big the actual card is, and so I couldnt fit both the backup and the CM10.1+Gapps zips on a single card)
I first made the backup on one card, and I hit reboot system, to swap it for the other one.
But when I pressed reboot, it asked me this:
ROM may flash stock recovery on boot. Fix?
THIS CAN NOT BE UNDONE.
-No
-No
-No
-No
-No
-No
-No
-Yes- Disable recovery flash
-No
-No
-No
I hit no.
Then it followed up with this:
Root access is missing. Root Device?
THIS CAN NOT BE UNDONE.
-No
-No
-No
-No
-No
-No
-No
-Yes - Root device (/system/xbin/su)
-No
-No
-No
I hit no for this too, since it didn't quite make sense.
So yeah. I'm pretty confused. Never ran into anything like that before on other devices.
Click to expand...
Click to collapse
Go to my HD/HD+ CWM thread linked in my signature. See item 1a. There is a new procedure to make a bootable CWM SD on any size card. I suggest you use that. Then you have room for backups and zips. My card works equally well with verygreen's, but is bigger. You may have to use SDFormatter with size adjustment like I say in the thread to get your full size back from the verygreen SD.
Those CWM messages are harmless, just keep saying no. My cards give the first message, but I have never seen the second one before.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Go to my HD/HD+ CWM thread linked in my signature. See item 1a. There is a new procedure to make a bootable CWM SD on any size card. I suggest you use that. Then you have room for backups and zips. My card works equally well with verygreen's, but is bigger. You may have to use SDFormatter with size adjustment like I say in the thread to get your full size back from the verygreen SD.
Those CWM messages are harmless, just keep saying no. My cards give the first message, but I have never seen the second one before.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks, I finished installing CM10.1.
But there seems to be a bit of lag. When I tried it with the SD card boot (not emmc), I assumed that it was slow because of the SD card. But it's the same even on this. Anyway to speed things up?

prabhjan said:
Thanks, I finished installing CM10.1.
But there seems to be a bit of lag. When I tried it with the SD card boot (not emmc), I assumed that it was slow because of the SD card. But it's the same even on this. Anyway to speed things up?
Click to expand...
Click to collapse
You need to ask those kinds of questions on verygreen's thread.
Sent from my Nook HD+ running CM10.1 on emmc.

I'm in recovery bootloop hell!
I just received my Nook HD+ yesterday and immediately tried to root it using the Nook HD+ for dummies thread.
I used NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13) for my bootable SD card.
I added these files cm-10.1-20130630-UNOFFICIAL-ovation-emmc.zip
cwm-recovery-ovation-2.zip
gapps-jb-20130301-signed.zip
(also used twrp on the first attempt but read about not being fully functional so I stopped using it)
I made a backup of the original ROM which I already registered with B&N.
Booted into CWM recovery and proceeded to wipe data/factory reset, flash cwm-recovery-ovation-2.zip, cm-10.1-20130630-UNOFFICIAL-ovation-emmc.zip, and gapps-jb-20130301-signed.zip in that order. Eject sd card and reboot.
Now all I get is four reboots and it goes back to CMW recovery everytime. I can restore back to stock (thankfully) if I want to but I really want to get this working. You think my partition 2 is damaged and needs repair?
Any help will be deeply appreciated!
BR

blackrain74 said:
I just received my Nook HD+ yesterday and immediately tried to root it using the Nook HD+ for dummies thread.
I used NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13) for my bootable SD card.
I added these files cm-10.1-20130630-UNOFFICIAL-ovation-emmc.zip
cwm-recovery-ovation-2.zip
gapps-jb-20130301-signed.zip
(also used twrp on the first attempt but read about not being fully functional so I stopped using it)
I made a backup of the original ROM which I already registered with B&N.
Booted into CWM recovery and proceeded to wipe data/factory reset, flash cwm-recovery-ovation-2.zip, cm-10.1-20130630-UNOFFICIAL-ovation-emmc.zip, and gapps-jb-20130301-signed.zip in that order. Eject sd card and reboot.
Now all I get is four reboots and it goes back to CMW recovery everytime. I can restore back to stock (thankfully) if I want to but I really want to get this working. You think my partition 2 is damaged and needs repair?
Any help will be deeply appreciated!
BR
Click to expand...
Click to collapse
No, the partition 2 repair thing is for the Nook Color. I recommend redownloading the CM10.1 zip and try flashing again.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
No, the partition 2 repair thing is for the Nook Color. I recommend redownloading the CM10.1 zip and try flashing again.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
That did the trick!!! Wow, I even downloaded the file twice and it was corrupt!!! Third time was a charm!!! Development is way ahead on the HD + compared to the Fire 8.9! Thanks for the quick response!

leapinlar said:
If you want to go back to stock first so you can back it up, go to my HD/HD+ CWM thread linked in my signature and get my plain stock 2.1.0 from item 6 and flash that with your bootable CWM SD. That will put everything back to stock, including recovery.
Then just start over again with your bootable CWM card. Backup, then flash the CWM emmc recovery, the CM10.1 zip and gapps, wipe data and reboot.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks for putting up this file. Great use in future if something gets bonked.

[solved] Reboot to recovery fails

I have carbon ROM installed. However the power menu and ROM manager options to reboot to recovery do not work. They just take me to the nook install failed screen. I like to mess with ROMs and I would love to must be able to install ROMs on the fly. I can get into recovery if in install my origal boot SD I used to get cwm into the device. Anyone have any advice for that?

kud0s said:
I have carbon ROM installed. However the power menu and ROM manager options to reboot to recovery do not work. They just take me to the nook install failed screen. I like to mess with ROMs and I would love to must be able to install ROMs on the fly. I can get into recovery if in install my origal boot SD I used to get cwm into the device. Anyone have any advice for that?
Click to expand...
Click to collapse
It is booting to recovery, stock recovery.
If you want CWM or TWRP recovery internally, you must install them. Go to verygreen's emmc CM10.1 thread and he has flashable zips to put one on your internal memory, replacing stock recovery.
Or, as you said, you could just boot to your CWM SD that you used to install Carbon.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
It is booting to recovery, stock recovery.
If you want CWM or TWRP recovery internally, you must install them. Go to verygreen's emmc CM10.1 thread and he has flashable zips to put one on your internal memory, replacing stock recovery.
Or, as you said, you could just boot to your CWM SD that you used to install Carbon.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Yes I have it fixed now. Thanks. Finally can reformat my 4gb sd card back to 32gb
Thanks for the quick reply.

stock restore help for nook hd+

Hi all
I'm sorry for making this post. But I've lost my stock backup and I need to restore my nook HD+. I saw a post earlier but now I carnt seem to find it and I have been searching for a while.
I hope somebody can point me into the right direction
Thank you.

http://forum.xda-developers.com/showthread.php?t=2062613
Section 6 deals with restoring

Stock revert for dummies!?
For those of us that are thick, could someone step us through the factory restore process?
Did the Android upgrade for my wife but she does not like it. She wants to revert back to Nook HD+ stock firmware!
Thanks in advance.

khitomer said:
For those of us that are thick, could someone step us through the factory restore process?
Did the Android upgrade for my wife but she does not like it. She wants to revert back to Nook HD+ stock firmware!
Thanks in advance.
Click to expand...
Click to collapse
Go to my HD/HD+ CWM thread linked in my signature and read item 6. Download plain stock 2.1.0 and flash it with the same CWM that you flashed CM10.1 with. Then do a factory reset with the same CWM. That should take you completely back to unregistered stock.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Go to my HD/HD+ CWM thread linked in my signature and read item 6. Download plain stock 2.1.0 and flash it with the same CWM that you flashed CM10.1 with. Then do a factory reset with the same CWM. That should take you completely back to unregistered stock.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks for the pointers! Excuse my noobiness!

leapinlar said:
Go to my HD/HD+ CWM thread linked in my signature and read item 6. Download plain stock 2.1.0 and flash it with the same CWM that you flashed CM10.1 with. Then do a factory reset with the same CWM. That should take you completely back to unregistered stock.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
When you refer to CWM, do you mean the initial bootable CWM on the sd card or the CWM subsequently installed on the unit?
Can we load the stock firmware zip onto a blank sd card, reboot to the installed cwm recovery, wipe cache and do a factory reset, then use the 'install zip from sd card" option to flash the stock firmware?
After flashing the stock firmware zip, will it be completely stock (i.e. recovery, kernel, rom)? Thanks.

banditsw said:
When you refer to CWM, do you mean the initial bootable CWM on the sd card or the CWM subsequently installed on the unit?
Can we load the stock firmware zip onto a blank sd card, reboot to the installed cwm recovery, wipe cache and do a factory reset, then use the 'install zip from sd card" option to flash the stock firmware?
After flashing the stock firmware zip, will it be completely stock (i.e. recovery, kernel, rom)? Thanks.
Click to expand...
Click to collapse
Either CWM is ok.
Yes to your second paragraph, but you do not need to wipe cache since the factory reset does that too.
And yes, if you flash that plain stock 2.1.0 and factory reset, it is completely stock. Your media files on internal memory remain though. If you want them gone too you must go to mounts and storage and format 'data and datamedia' before you reboot.
Sent from my Galaxy Tab 2 using XDA Premium

Nook HD+ cannot boot into Cyanogen or stock ROM ( soft brick?)

Hi guys,
I have bought the Nook HD+ and I tried to install CM 10.1 to the Nook by following this one
1. restore the CWM img to the micro SD ( my own is 16Gb one )
2. I did not make a backup in CWM ( the guide didn't say so and Im just a newbie of Android ). After that, I did install CM 10.1 ( downloaded from homepage) zip file, also Goo Apps as well.
Kind of simple one. Now my nook jsut boot in CM 10.1 with the logo and staying at this stage ( without micro SD card). In case I keep the micro SD card inside the Nook, it just continue booting into CWM. I did not do any format option in CWM. Did I make any mistake? What can I do now?

You must do a factory reset with CWM after installing CM10.1. You need to get rid of those stock settings.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
You must do a factory reset with CWM after installing CM10.1. You need to get rid of those stock settings.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
yep! the problem is even when I choose to install from zip file then I did wipe all setting, clear cache. I still cannot boot into CM 10.1 Now I just can boot into CWM. What can I do now?

I just did it successful. Thank for your supporting
:laugh:

Database Develop

welcome