I'm not developer, but I'm a normal user that trying to help TX user. Go the the link (http://apk.tw/thread-495505-1-1.html) and download those files (TX LT29i 4.3 295 deodex flashable04.zip and Xperia Tx 4.3 Root 懶人工具包.zip). After downloaded (Xperia Tx 4.3 Root 懶人工具包.zip) file, inside contain 4 files (UPDATE-SuperSU-v1.91.zip, XT-lockeddualrecovery2.7.89-BETA.flashable.zip, XT-lockeddualrecovery2.7.89-BETA.installer.zip, and Xperia_TX_LT29i 9.2.A.0.295 USA kernelonly.ftf). Then place files (UPDATE-SuperSU-v1.91.zip, XT-lockeddualrecovery2.7.89-BETA.flashable.zip, and TX LT29i 4.3 295 deodex flashable04.zip) into your phone.
Reminder : First your device have to be Rooted and CWM installed.
Instruction :
1. Boot into CWM
2. Wipe cache, dalvik cache, and personal data
3. Flash TX LT29i 4.3 295 deodex flashable04.zip
4. Then follow by XT-lockeddualrecovery2.7.89-BETA.flashable.zip, and UPDATE-SuperSU-v1.91.zip without reboot.
5. POWER OFF YOUR PHONE (not reboot)
6. Using Flashtool to flash the kernal.ftf file (Xperia_TX_LT29i 9.2.A.0.295 USA kernelonly.ftf)
7. Done
Note : Reported Xposed Installer 2.4.1 having issue.
Sorry for my bad english. Just want to share to TX user. Hope it works. Thanks
joonlin said:
I'm not developer, but I'm a normal user that trying to help TX user. Go the the link (http://apk.tw/thread-495505-1-1.html) and download those files (TX LT29i 4.3 295 deodex flashable04.zip and Xperia Tx 4.3 Root 懶人工具包.zip). After downloaded (Xperia Tx 4.3 Root 懶人工具包.zip) file, inside contain 4 files (UPDATE-SuperSU-v1.91.zip, XT-lockeddualrecovery2.7.89-BETA.flashable.zip, XT-lockeddualrecovery2.7.89-BETA.installer.zip, and Xperia_TX_LT29i 9.2.A.0.295 USA kernelonly.ftf). Then place files (UPDATE-SuperSU-v1.91.zip, XT-lockeddualrecovery2.7.89-BETA.flashable.zip, and TX LT29i 4.3 295 deodex flashable04.zip) into your phone.
Reminder : First your device have to be Rooted and CWM installed.
Instruction :
1. Boot into CWM
2. Wipe cache, dalvik cache, and personal data
3. Flash TX LT29i 4.3 295 deodex flashable04.zip
4. Then follow by XT-lockeddualrecovery2.7.89-BETA.flashable.zip, and UPDATE-SuperSU-v1.91.zip without reboot.
5. POWER OFF YOUR PHONE (not reboot)
6. Using Flashtool to flash the kernal.ftf file (Xperia_TX_LT29i 9.2.A.0.295 USA kernelonly.ftf)
7. Done
Note : Reported Xposed Installer 2.4.1 having issue.
Sorry for my bad english. Just want to share to TX user. Hope it works. Thanks
Click to expand...
Click to collapse
thanks u so much !
it working perfect
hi joonlin
in the main site there is a step install CWM XT-lockeddualrecovery2.7.89-BETA , i wonder if CWM4XperiaT_v8 was installed working or not ?
thanks
Confirmed root to be working, but CWM does not after following the translated steps. I can live without it for now though.
Thank you
blackcat1XIII said:
thanks u so much !
it working perfect
Click to expand...
Click to collapse
devilmaycry2020 said:
hi joonlin
in the main site there is a step install CWM XT-lockeddualrecovery2.7.89-BETA , i wonder if CWM4XperiaT_v8 was installed working or not ?
thanks
Click to expand...
Click to collapse
SammiSaysHello said:
Confirmed root to be working, but CWM does not after following the translated steps. I can live without it for now though.
Thank you
Click to expand...
Click to collapse
I find solution that can make CWM and Xposed installer working! :laugh:
After follow all the instruction on my first post, now:
1. Make sure have to tick unknown source and USB debugging (Abount phone > keep clicking the build number until it show Developer options)
2. Open file (XT-lockeddualrecovery2.7.89-BETA.installer.zip) and run (install.bat)
3. While progressing, check your phone and select OK
4. Done!
5. After installing then open app (NDR Utils), select ClockWordMod and click Reboot into Recovery (don't not press volume up or down while rebooting).
*6. If Reboot into Recovery not working, then manually power off and on again, but I think still having some issue there. Sorry if not working
For Xposed Installer:
1. Download from http://forum.xda-developers.com/showpost.php?p=48484642&postcount=6846
2. Install. Then shut down your phone and power on again.
3. Done.
joonlin said:
I find solution that can make CWM and Xposed installer working! :laugh:
After follow all the instruction on my first post, now:
1. Make sure have to tick unknown source and USB debugging (Abount phone > keep clicking the build number until it show Developer options)
2. Open file (XT-lockeddualrecovery2.7.89-BETA.installer.zip) and run (install.bat)
3. While progressing, check your phone and select OK
4. Done!
5. After installing then open app (NDR Utils), select ClockWordMod and click Reboot into Recovery (don't not press volume up or down while rebooting)
For Xposed Installer:
1. Download from http://forum.xda-developers.com/showpost.php?p=48484642&postcount=6846
2. Install. Then shut down your phone and power on again.
3. Done.
Click to expand...
Click to collapse
This worked!
SammiSaysHello said:
This worked!
Click to expand...
Click to collapse
But I think the CWM not working. Can't flash from sdcard
joonlin said:
But I think the CWM not working. Can't flash from sdcard
Click to expand...
Click to collapse
Hm. I haven't actually tried flashing anything
Have you tried both CWM and TWRP?
SammiSaysHello said:
Hm. I haven't actually tried flashing anything
Have you tried both CWM and TWRP?
Click to expand...
Click to collapse
Yup. Error on mounting SDcard.
CWM didn't work , error mounting sdcard0, error mounting sdcard1 too. useless if CWM dont work.
devilmaycry2020 said:
CWM didn't work , error mounting sdcard0, error mounting sdcard1 too. useless if CWM dont work.
Click to expand...
Click to collapse
btw try this method by blackcat and report http://forum.xda-developers.com/showthread.php?p=50420194
I'm having problem with super su with this tutorial. i dont know if i miss something or this is really a bug. i did this tutorial two times already today but it come up with the same result everytime i open SuperSU please help me guys.
"There is no SU binary installed,and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 4.3, you need to manually re-root- consult the relevant forums for your device"
Oohhlala said:
btw try this method by blackcat and report http://forum.xda-developers.com/showthread.php?p=50420194
Click to expand...
Click to collapse
Did you try it and cwm work? I dont think it will work, anyway i reverted to 4.1.2, new 4.3 have too many bugs
i don´t understand what do i need to do this, op say sthat i have to be rooted and CWM installed, and i allready have that on 4.1.2 but i do all the steps, wipe everything then flash deodex zip, then flash SU update then recoverry flashable zip and after that turn off the phone and flash only 4.3 kernel on flashtool, but when my phone turns on root is allready lost, can anybody tell me what im doing wrong, is there a problem if i do this from oficial 4.1.2 i have locked bootloader
daniel090588 said:
i don´t understand what do i need to do this, op say sthat i have to be rooted and CWM installed, and i allready have that on 4.1.2 but i do all the steps, wipe everything then flash deodex zip, then flash SU update then recoverry flashable zip and after that turn off the phone and flash only 4.3 kernel on flashtool, but when my phone turns on root is allready lost, can anybody tell me what im doing wrong, is there a problem if i do this from oficial 4.1.2 i have locked bootloader
Click to expand...
Click to collapse
Shouldn't be a problem with locked bootloader. After flashing (TX LT29i 4.3 295 deodex flashable04.zip), try to flash (XT-lockeddualrecovery2.7.89-BETA.flashable.zip), then (UPDATE-SuperSU-v1.91.zip). Mmm.. and my opinion is not to upgrade to sony official 4.3 JB, because having lot of bugs and the most annoying bug is that will turn your phone off when fully charge. Maybe you can try 4.3 leak from EXR
joonlin said:
Shouldn't be a problem with locked bootloader. After flashing (TX LT29i 4.3 295 deodex flashable04.zip), try to flash (XT-lockeddualrecovery2.7.89-BETA.flashable.zip), then (UPDATE-SuperSU-v1.91.zip). Mmm.. and my opinion is not to upgrade to sony official 4.3 JB, because having lot of bugs and the most annoying bug is that will turn your phone off when fully charge. Maybe you can try 4.3 leak from EXR
Click to expand...
Click to collapse
Thanks man i.ve allready try it and i locked the bootloader again and restore the TA backup, i´m testing now with this method http://forum.xda-developers.com/showthread.php?t=2657190 and yes i know about all the bugs on 4.3, personally didn´t see that bug on my phone i leave it all night charging and wake up and its on and 100% charged so there´s no problem there for me, what does really bothers me is the volume bug and low volume system, but with root and CWM installed i guess it can be fixed.
So in order to use this method I should start with rooted 4.1.2? If so unfortunately I've lost root access due to official 4.3 update
XPS_93 said:
So in order to use this method I should start with rooted 4.1.2? If so unfortunately I've lost root access due to official 4.3 update
Click to expand...
Click to collapse
same like me. can i start with rooted 4.1.2?
XPS_93 said:
So in order to use this method I should start with rooted 4.1.2? If so unfortunately I've lost root access due to official 4.3 update
Click to expand...
Click to collapse
lagunabad said:
same like me. can i start with rooted 4.1.2?
Click to expand...
Click to collapse
As long as your phone is rooted and having CWM, then it will works fine.
Related
All credit goes to @zhuhang. I have no contribution to it.
Original thread is here: http://forum.xda-developers.com/showthread.php?p=45344021
This method will help you gain root access on the latest .67 4.2.2 update that Sony recently pushed out.
Disclaimer:
- This requires a PC.
- No CWM needed.
- This installs a Chinese root manager rather than superuser or superSU. But I will teach you how to replace it below.
Instruction:
1. Download the rooting application. (This app can root many other devices )
VRoot_1.6.0.3690
http://www.mediafire.com/download/v3...3690_Setup.exe
2. Install the app. This is a Chinese app so I will guide you. Below is a step by step screenshot attached guide.
3. Start VROOT and root now!
4. Now we need to install SuperSU from play store to replace the Chinese root manager called 授权管理 1.0.4.
5. Go to play store and install SuperSU.
6. Start SuperSU and you will be asked for permission by 授权管理 1.0.4, choose 允许(means allow). (Should be the right side option.)
7. SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.
8. Now, freeze 授权管理 1.0.4 in titanium backup, just in case you need it again.
Note: If you uninstall straight away from app manager, you need to make sure SuperSU updated the binary.
9. Re-run SuperSU to make sure everything is alright. You will be prompt again to install SU binary, just do what it asked.
10. After that, you are rooted with SuperSU and 授权管理 1.0.4 will not be there anymore.
Click to expand...
Click to collapse
djpeesh said:
Can someone upload an ftf with just the kernel.sin and bootloader.sin for the C5503? I tried creating one using C5502 kernel and i got stuck in a boot loop. luckily my battery was just at about 10% and so I quickly flashed back the 4.2.2 Kernel of the 5503 and all is well.
Once we get the kernel only ftf, can test and create guide for rooting 5503 on 4.2.2
Click to expand...
Click to collapse
Tried with the C5503 kernel. Same boot loop. I think we'll have to find an alternate root method, as unlike the Z, the ZR doesnt have .234 firmware [that is also 4.2]
Experimenting with the Z firmware. Wish me luck
Why not flash only kernel from the previous firmware? Isn't working?
UPD. I see - not work
djpeesh said:
Tried with the C5503 kernel. Same boot loop. I think we'll have to find an alternate root method, as unlike the Z, the ZR doesnt have .234 firmware [that is also 4.2]
Experimenting with the Z firmware. Wish me luck
Click to expand...
Click to collapse
I have rooted mine already (ie. Android 4.2.2). You have to unlock your bootloader for this method to work.
akash4357 said:
I have rooted mine already (ie. Android 4.2.2). You have to unlock your bootloader for this method to work.
Click to expand...
Click to collapse
Can you say more about your 4.2.2 rooting method?
itandy said:
Can you say more about your 4.2.2 rooting method?
Click to expand...
Click to collapse
Firstly you need to unlock your bootloader. Google that, its easy. OR you can do it through flashtools (not tested).
Enable USB Debugging and unknown sources option on your phone before proceeding.
Download Flashtool, Open it. Flash the the kernel of an old firmware of Xperia ZR which was rootable.
Reboot your Xperia ZR after flashing. Connect to PC in USB Debugging mode.
Do not forget to close FLASHTOOL.
Extract the downloaded “DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip” file and run the “runme_win” file.
Follow onscreen instructions to root Xperia ZR and once it is rooted, device will reboot. Verify that you are rooted, run SuperSU app.
Now switch off your Xperia ZR. OPEN FLASHTOOL.
Now you need to flash the true kernel of Android 4.2.2 10.3.1.A.0.244 firmware of Xperia ZR.
After flashing, disconnect the phone from PC, reboot it and your Xperia ZR is now rooted
Official Thread
akash4357 said:
Firstly you need to unlock your bootloader. Google that, its easy. OR you can do it through flashtools (not tested).
Enable USB Debugging and unknown sources option on your phone before proceeding.
Download Flashtool, Open it. Flash the the kernel of an old firmware of Xperia ZR which was rootable.
Reboot your Xperia ZR after flashing. Connect to PC in USB Debugging mode.
Do not forget to close FLASHTOOL.
Extract the downloaded “DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip” file and run the “runme_win” file.
Follow onscreen instructions to root Xperia ZR and once it is rooted, device will reboot. Verify that you are rooted, run SuperSU app.
Now switch off your Xperia ZR. OPEN FLASHTOOL.
Now you need to flash the true kernel of Android 4.2.2 10.3.1.A.0.244 firmware of Xperia ZR.
After flashing, disconnect the phone from PC, reboot it and your Xperia ZR is now rooted
Click to expand...
Click to collapse
So basically you're doing:
Use FlashTool to flash the 4.2.2 FTF
Downgrade the kernel by using FlashTool back to 4.1.2
Run the DoomLord rooting kit
Flash back 4.2.2 kernel using FlashTool
To flash the kernel you need an unlocked bootloader. What I don't understand is how to flash the kernel only? I found the kernel.sin inside the FTF file. Can I just delete other .sin file and flash the remaining FTF file?
Sorry if my questions are noob.
itandy said:
So basically you're doing:
Use FlashTool to flash the 4.2.2 FTF
Downgrade the kernel by using FlashTool back to 4.1.2
Run the DoomLord rooting kit
Flash back 4.2.2 kernel using FlashTool
To flash the kernel you need an unlocked bootloader. What I don't understand is how to flash the kernel only? I found the kernel.sin inside the FTF file. Can I just delete other .sin file and flash the remaining FTF file?
Sorry if my questions are noob.
Click to expand...
Click to collapse
You need to keep the kernel.sin and bootloader.sin in the ftf and delete the rest. Also don't delete the META-INF file.
Official thread
akash4357 said:
You need to keep the kernel.sin and bootloader.sin in the ftf and delete the rest. Also don't delete the META-INF file.
Official thread
Click to expand...
Click to collapse
The problem is the bootloader? I thought doom's thread said that this was for locked and unlocked bootloader. Unlocking the bootloader will lead to a lot of people avoiding the root method.
Sent from my C5503 using Tapatalk 2
djpeesh said:
The problem is the bootloader? I thought doom's thread said that this was for locked and unlocked bootloader. Unlocking the bootloader will lead to a lot of people avoiding the root method.
Sent from my C5503 using Tapatalk 2
Click to expand...
Click to collapse
So is an unlocked bootloader NEEDED for this method to work for ZR? I thought DoomLord said it works for both.
akash4357 said:
You need to keep the kernel.sin and bootloader.sin in the ftf and delete the rest. Also don't delete the META-INF file.
Official thread
Click to expand...
Click to collapse
Have you managed to root through this method?
djpeesh said:
Have you managed to root through this method?
Click to expand...
Click to collapse
I did manage to root it, but then the phone suddenly restarts. Now I am stuck with bootloops. Strange as I managed to install Superuser from the Play Store.
Edit. I recommend not trying to root using this method. Wait till theres a definitive rooting method.
djpeesh said:
Have you managed to root through this method?
Click to expand...
Click to collapse
I see you got bootloop from the other thread. Did you manage to fix it?
Bump.
itandy said:
I see you got bootloop from the other thread. Did you manage to fix it?
Click to expand...
Click to collapse
Yes. I fixed the bootloop issue. Need any help with the bootloop?
If you've got a bootloop, pull the battery asap as once it dies, you won't be able to flash ftf and the device will be bricked.
To fix bootloop [and still not get root access]
1. Open the 4.2.2 ftf file in flashtool.
2. Exclude everything [tick in the exclude box] except the kernel, and untick everything in the wipe box [data, applog]
3. Flash the kernel by pressing the volume down button while plugging in USB cable [DONT PRESS POWER BUTTON AFTER BATTERY PULL AS OTHERWISE YOU'LL GO BACK INTO BOOTLOOP]
4. After it flashes [should take a couple of seconds], reboot and you should be back to normal
I REPEAT PULL THE BATTERY IF IN A BOOTLOOP OR YOU'LL LAND UP WITH ANOTHER PAPERWEIGHT
djpeesh said:
Yes. I fixed the bootloop issue. Need any help with the bootloop?
If you've got a bootloop, pull the battery asap as once it dies, you won't be able to flash ftf and the device will be bricked.
To fix bootloop [and still not get root access]
1. Open the 4.2.2 ftf file in flashtool.
2. Exclude everything [tick in the exclude box] except the kernel, and untick everything in the wipe box [data, applog]
3. Flash the kernel by pressing the volume down button while plugging in USB cable [DONT PRESS POWER BUTTON AFTER BATTERY PULL AS OTHERWISE YOU'LL GO BACK INTO BOOTLOOP]
4. After it flashes [should take a couple of seconds], reboot and you should be back to normal
I REPEAT PULL THE BATTERY IF IN A BOOTLOOP OR YOU'LL LAND UP WITH ANOTHER PAPERWEIGHT
Click to expand...
Click to collapse
I just learned a lesson! Thanks!
So again you're not successful in rooting 4.2.2 using the kernel switching method?
i think the kernel switching fix will not work on ZR.. we don't have a rootable 4.2 kernel
i think the 423 kernel is 4.2
djpeesh said:
Yes. I fixed the bootloop issue. Need any help with the bootloop?
If you've got a bootloop, pull the battery asap as once it dies, you won't be able to flash ftf and the device will be bricked.
To fix bootloop [and still not get root access]
1. Open the 4.2.2 ftf file in flashtool.
2. Exclude everything [tick in the exclude box] except the kernel, and untick everything in the wipe box [data, applog]
3. Flash the kernel by pressing the volume down button while plugging in USB cable [DONT PRESS POWER BUTTON AFTER BATTERY PULL AS OTHERWISE YOU'LL GO BACK INTO BOOTLOOP]
4. After it flashes [should take a couple of seconds], reboot and you should be back to normal
I REPEAT PULL THE BATTERY IF IN A BOOTLOOP OR YOU'LL LAND UP WITH ANOTHER PAPERWEIGHT
Click to expand...
Click to collapse
I am trying to get 4.2.2, but after flashing the system rom on step 4, I got into a boot loop. I can't seem to use flashtool to recover, Please help! I can't even get to recovery
EDIT: Now I am going somewhere I think, but I don't know if this is serious, I get this from flashmode now
ERROR - Error in processHeader : 1 : Incorrect function.
ERROR - Error flashing. Aborted
EDIT: I think I bricked my device =(
grim_ripper said:
I am trying to get 4.2.2, but after flashing the system rom on step 4, I got into a boot loop. I can't seem to use flashtool to recover, Please help! I can't even get to recovery
EDIT: Now I am going somewhere I think, but I don't know if this is serious, I get this from flashmode now
ERROR - Error in processHeader : 1 : Incorrect function.
ERROR - Error flashing. Aborted
EDIT: I think I bricked my device =(
Click to expand...
Click to collapse
It happened to me also, but it's possible to recover from it.
Install PC Companion on your PC.
Go to Support Zone.
First option -> Update phone / tablet software.
You will see a underlined link that says "repair phone / tablet"
Just follow the instructions.
You will need your phone to have at least 50% battery level. Take out the battery, insert again, and connect your phone to your PC via USB while pressing the Volume + button. You will hear a sound coming from your PC meaning it's been connected.
Sony PC Companion then will flash your phone with the latest firmware. It takes a while and you need to have internet connection, but it works.
As you flashed the Russian system rom, the firmware installed in your phone by Sony PC companion will be the Russian Android 4.2.2. No problem with this as it includes all the languages.
Do this as soon as possible as you need your battery charged and you can't charge the battery in your phone while in the bootloop state.
-------------------------------------------------------------------------
-------------------------------------------------------------------------
I'm not sure what we did wrong to be stuck in a bootloop, but after my ZR being reflashed by Sony PC Companion I just flashed the Nordic 4.2.2 ROM and my phone remains unrooted until there is a easier method to get root
grim_ripper said:
I am trying to get 4.2.2, but after flashing the system rom on step 4, I got into a boot loop. I can't seem to use flashtool to recover, Please help! I can't even get to recovery
EDIT: Now I am going somewhere I think, but I don't know if this is serious, I get this from flashmode now
ERROR - Error in processHeader : 1 : Incorrect function.
ERROR - Error flashing. Aborted
EDIT: I think I bricked my device =(
Click to expand...
Click to collapse
In fact you should read the other thread for a workable root method for 4.2.2. This thread is very old and AFAIK this method doesn't work.
[STOCK][C6602&C6603][4.2.2] Update to 10.3.1.A.0.244 [Rooted & XZDualRecovery][LB/UB]
Requirements:
Flashtool by @Androxyde
XZDualRecovery 2.5 RELEASE or newer.
Current FW version: 10.3.A.0.423, maybe others too, let me know!
Special features:
Superuser integrated in system, FULL root, no reboots when remounting /system RW!
XZDualRecovery 2.7 BETA (CWM ADVANCED 6.0.3.4 & TWRP 2.6.0.0) pre-installed;
Tailored FTF to minimize the chance of accidental system wiping!
No need to clear caches!
@shem2409 created a nice youtube video guide to assist you in your work, be sure to check this post for it! Thanks m8!
The C6603 ROM is based on the FTF provided by @NetSkill in this thread. Thanks dude
The C6602 ROM is based on the FTF provided by @alfiabraham in this thread. Thanks dude
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
C6602: How to update to 10.3.1.A.0.244:
For C6602: Download C6602GI.flashable.244.zip (Bittorrent: 741MB) and C6602_10.3.1.A.0.244_GenericI-stripped.ftf (15MB), save it somewhere you remember;
Put 'C6602GI.flashable.244.zip' on (the external) SDcard1;
Put 'C6602_10.3.1.A.0.244_GenericI-stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in CWM or TWRP and don't forget to backup the contents of 'SDCard0';
Flash 'C6602GI.flashable.244.zip' in TWRP, do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C6602_10.3.1.A.0.244_GenericI-stripped.ftf';
Reboot to system without clearing (dalvik-/)cache.
C6603: How to update to 10.3.1.A.0.244:
For C6603: Download C6603CE.flashable.244.zip (Bittorrent: 688MB) and C6603_10.3.1.A.0.244_GenericCE-stripped.ftf (15MB), save it somewhere you remember;
Put 'C6603CE.flashable.244.zip' on (the external) SDcard1;
Put 'C6603_10.3.1.A.0.244_GenericCE-stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in CWM or TWRP and don't forget to backup the contents of 'SDCard0';
Flash 'C6603CE.flashable.244.zip' in TWRP, do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C6603_10.3.1.A.0.244_GenericCE-stripped.ftf';
Reboot to system without clearing (dalvik-/)cache.
The first boot will be considerably slower and after a long wait at the boot animation you will see Android optimizing the apps on your phone.
I have done this myself along side @Tamirwig, using this method and we have not found any problem yet, again! :fingers-crossed:
NOTE: You will eventually/inevitably get the triangle screen again after doing this update (typically after you shut down your phone to reboot it without an actual reboot command), you will have to sit this one out it seems, it keeps coming back until it's done...
DO NOT INTERRUPT IT, LET IT RUN AND DO IT'S THING! you have been warned!
Enjoy! :laugh:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore a /system ONLY using any means you are familiar with so you can try again.
Root it using [Z][ROOT] DooMLoRD Easy Rooting Toolkit.
Install XZDualRecovery and then try to update again using TWRP. This time you can skip the FTF as it has already done it's job.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /tmp/XZDualRecovery, pack them up and send them to me.
Thank you
Works great! Thanks.
Flashing everything and not only baseband?
Gesendet von meinem C6603 mit Tapatalk 4 Beta
Just flash it (The stripped ftf) as is, you don't need to exclude anything or mess with the flashing settings.
This is awesome stuff! Can I flash this on my 6602? I have the XZ Dual recovery already installed with a C6603 stock rom.
carlsbad28 said:
This is awesome stuff! Can I flash this on my 6602? I have the XZ Dual recovery already installed with a C6603 stock rom.
Click to expand...
Click to collapse
you can, just don't expect LTE to magically work all of a sudden
[NUT] said:
you can, just don't expect LTE to magically work all of a sudden
Click to expand...
Click to collapse
Lol! Yes, of course! Downloading now!
[NUT] said:
you can, just don't expect LTE to magically work all of a sudden
Click to expand...
Click to collapse
ja deodexei this build but I have error when installing the system to move files deodex
anyone know why it reboots to mount rw
Thank you.
Just making sure this won't delete any of my current data, files, etc? I've made a backup of them already on cwm but just making sure
Currently using excelsus ROM by zero
Xperia Z Vanilla
bootloop here
Coming from monxdified Honami 01-03 rom.
Is this newer than.... 423??
Sent from my C6603 using xda app-developers app
Yes, .244 is newer than .423
just flashed the stock .244 yesterday.
I had a dual recovery before (somewhen...).... but i guess thats gone now ? (even flashed a few doom kernels between)
If i just flash this in CWM will it work ? Or is it essential to install Dual recovery before ?
P.S could you please consider using a different hoster for your .torrent files ? i use my NAS as external download station. Instead of just using the link Copy&Paste i had to wait 10sec, download the .torrent file and configure the download manually.
Or just a direct link to the .torrent file wihout waiting time, that would be awesome.
Flashed this successfully following instructions on the OP on my C6602.
One thing I noticed though, after flashing the zip, I went back to Menu in TWRP then tapped on Reboot. A prompt came up saying Root permissions are lost and a swipe to fix was shown. I did not attempt to fix and proceeded to next instruction and flashed through Flashboot.
Thanks for this update and guide @[NUT] Amazing piece of work.
EDIT: BTW, after the phone booted, I did not lose any data. Just an FYI. Oh, I still haven't seen that Triangle you mentioned in the OP. Hope it doesn't pop up.
carlsbad28 said:
Flashed this successfully following instructions on the OP on my C6602.
One thing I noticed though, after flashing the zip, I went back to Menu in TWRP then tapped on Reboot. A prompt came up saying Root permissions are lost and a swipe to fix was shown. I did not attempt to fix and proceeded to next instruction and flashed through Flashboot.
Thanks for this update and guide @[NUT] Amazing piece of work.
EDIT: BTW, after the phone booted, I did not lose any data. Just an FYI. Oh, I still haven't seen that Triangle you mentioned in the OP. Hope it doesn't pop up.
Click to expand...
Click to collapse
try rebooting after first boot
Thanks [NUT] I have updated my Z and I didn't even have to use titanium backup to restore anything, this is by far the easiest update I have ever done :good:
juanmaasecas said:
bootloop here
Coming from monxdified Honami 01-03 rom.
Click to expand...
Click to collapse
Same here, doesn't work for me I'm afraid...
is there any exploit to root an already updated version via pc-companion.
i have run the DooMLoRD-easy-rootkit_v18 and is not working (linux / windows)
BeetoCarvalho said:
ja deodexei this build but I have error when installing the system to move files deodex
anyone know why it reboots to mount rw
Thank you.
Click to expand...
Click to collapse
If you look at /tmp in a file manager app there should be 2 files there: killedric and remountedrootfs . If they are not there then the RIC service is probably active... can you check that for me?
dreamville said:
Just making sure this won't delete any of my current data, files, etc? I've made a backup of them already on cwm but just making sure
Currently using excelsus ROM by zero
Xperia Z Vanilla
Click to expand...
Click to collapse
Nope, the backup is in case something fails... but you should not lose anything if it all works as planned.
juanmaasecas said:
bootloop here
Coming from monxdified Honami 01-03 rom.
Click to expand...
Click to collapse
To migrate from a custom rom to stock is asking for problems sir... sorry but if you really want to use this ROM, make sure you have app backups and do a factory reset.
Haldi4803 said:
just flashed the stock .244 yesterday.
I had a dual recovery before (somewhen...).... but i guess thats gone now ? (even flashed a few doom kernels between)
If i just flash this in CWM will it work ? Or is it essential to install Dual recovery before ?
P.S could you please consider using a different hoster for your .torrent files ? i use my NAS as external download station. Instead of just using the link Copy&Paste i had to wait 10sec, download the .torrent file and configure the download manually.
Or just a direct link to the .torrent file wihout waiting time, that would be awesome.
Click to expand...
Click to collapse
You will be faster off when not using this package but rooting it with the workaround by DooMLoRD and installing the current XZDualRecovery....
For you and people like you i will add a direct link to the file on the download screen.
carlsbad28 said:
Flashed this successfully following instructions on the OP on my C6602.
One thing I noticed though, after flashing the zip, I went back to Menu in TWRP then tapped on Reboot. A prompt came up saying Root permissions are lost and a swipe to fix was shown. I did not attempt to fix and proceeded to next instruction and flashed through Flashboot.
Thanks for this update and guide @[NUT] Amazing piece of work.
EDIT: BTW, after the phone booted, I did not lose any data. Just an FYI. Oh, I still haven't seen that Triangle you mentioned in the OP. Hope it doesn't pop up.
Click to expand...
Click to collapse
TWRP expects a certain permission on the su executable... which is basically the same as with my packages. Even DooMLoRD sets the same... i was going to report a bug on that to Team Win about that soon... it's annoying. Root works fine either way.
spazzy1912 said:
try rebooting after first boot
Click to expand...
Click to collapse
Shutting down is more the trigger...
dazjp71 said:
Thanks [NUT] I have updated my Z and I didn't even have to use titanium backup to restore anything, this is by far the easiest update I have ever done :good:
Click to expand...
Click to collapse
You're welcome, here to please
[NUT] said:
Nope, the backup is in case something fails... but you should not lose anything if it all works as planned.
To migrate from a custom rom to stock is asking for problems sir... sorry but if you really want to use this ROM, make sure you have app backups and do a factory reset.
Click to expand...
Click to collapse
Hmmm but I'm on excelsus by zero ROM....would that cause an issue if updated like you said to the other person in the above quote?
Xperia Z Vanilla
I have xperia z1 C6903 and i want to root it and install new rom
i am downloading now this one
HONAMI_430_290_MONX
030002P_REL
676.16MB
and i need help with steps
what shall i do exactly please someone help me with every single step to root my device and install that rom
NightZeus said:
I have xperia z1 C6903 and i want to root it and install new rom
i am downloading now this one
HONAMI_430_290_MONX
030002P_REL
676.16MB
and i need help with steps
what shall i do exactly please someone help me with every single step to root my device and install that rom
Click to expand...
Click to collapse
Use this guide first to get root and recovery on .290
Then go to recovery and flash the mondified zip. After flash clear cache and dalvik and reboot. DONE
DO NOT CREATE NEW THREADS FOR SOMETHING THAT HAS BEEN ASKED 100s OF TIMES !!!
this man too fast i dont understand many things i just download now the flashtool ok then i download this file C6903_14.2.A.0.290_Stripped.ftf ok lets forget about installing new rom i just wanna root my xperia z do i download this 2 files what i have to do else ? for just rooting my device ?
NightZeus said:
this man too fast i dont understand many things i just download now the flashtool ok then i download this file C6903_14.2.A.0.290_Stripped.ftf ok lets forget about installing new rom i just wanna root my xperia z do i download this 2 files what i have to do else ? for just rooting my device ?
Click to expand...
Click to collapse
If you can't follow the video, read the thread:
http://forum.xda-developers.com/showthread.php?t=2572988
i think i did something wrong my xperia z1 not working anymore i try to open it it shown sony and black screen and not start up anymore what can i do
anybody can help me to fix it on team viewer anybody can do that i wanna root my mobile and now its not working anymore guys
NightZeus said:
i think i did something wrong my xperia z1 not working anymore i try to open it it shown sony and black screen and not start up anymore what can i do
Click to expand...
Click to collapse
This is called a bootloop. All you need to do is press VOL UP + POWER, then connect your phone to your computer in flashmode (connect USB while holding VOL DOWN button) and flash .534 using Flashtool
Yep, just Hold Volume Down, connect to PC and flash a Stock FTF.
shem2409 said:
If you can't follow the video, read the thread:
http://forum.xda-developers.com/showthread.php?t=2572988
Click to expand...
Click to collapse
sir I follow the link and successful rooted and install recovery everything.now I want flash this HONAMI_430_290_MONX. Do I still need to flash kernel and recovery again or just make a wipe and flash?
paullu said:
sir I follow the link and successful rooted and install recovery everything.now I want flash this HONAMI_430_290_MONX. Do I still need to flash kernel and recovery again or just make a wipe and flash?
Click to expand...
Click to collapse
No just go into recovery, flash the monxdified rom zip and then clear cache and dalvik. I have done the same thing and it works perfectly fine. You can flash any 4.3 rom in this way, as you are on the same firmware.
shem2409 said:
No just go into recovery, flash the monxdified rom zip and then clear cache and dalvik. I have done the same thing and it works perfectly fine. You can flash any 4.3 rom in this way, as you are on the same firmware.
Click to expand...
Click to collapse
sorry for stupid question I just want make sure
So I just need to flash rom.no need ti flash kernel
Also do I need to make a factory reset before flash?and you said after flashed rom need to clean cache and dalvik?
paullu said:
sorry for stupid question I just want make sure
So I just need to flash rom.no need ti flash kernel
Also do I need to make a factory reset before flash?and you said after flashed rom need to clean cache and dalvik?
Click to expand...
Click to collapse
Monxdified, iHackers and all stock based roms don't need a custom kernel (that's why you don't need to be bootloader unlocked to use them)
Just go into your recovery flash the zip. After the zip is flashed you will get an option to clear dalvik and cache.
It is always recommended to do a factory reset before flashing a custom rom, as it might misbehave. You can however try it without factory reset and then if you see that it doesn't work properly just do a factory reset and flash the rom zip again.
Known CWM recovery, greatly improved with touch ui and many useful features by Phil3759.
Original Xperia T thread
Compatible with Rom Manager (reboot recovery, backup, install,...)
As the title says, this recovery has some needed modifications included, so you can use it with unmodified stock kernel (locked bootloader).
Main LB script with logging was created by cray_Doze.
My modifications are firstly based on recovery from davidmarco, then I found big help and better (PhilZ) recovery in [NUT]´s thread and that it´s better to unmount selinux fs so it cannot be redefined and checking files is probably stopped (?) in recovery, so I´ve had to use init binary that does not need selinux.
Installation:
1. Root your device
2. Install modified Flash Gordon app (no busybox installation needed)
3. Download this recovery to SDcard
4. Launch the app and allow it root access
5. Tap "select zip", find the zip, "flash now"
6. Don´t try to reboot with the app, but do regular reboot in power menu
Upgrading from 4.1 with CWM for LB to stock 4.3:
1. Download stock 4.3 rom zip to SDcard
2. Download this recovery to SDcard
3. Reboot to 4.1 CWM and flash 4.3 rom
4. Flash this recovery (optionally flash SU too)
5. Power off the device
6. Flash 4.3 ftf - tick all wipes, and exclude system from installation or you will do it all again from scratch
Or if you already have some recovery on 4.3, just flash this in recovery.
Caution:
Don´t try to flash rom zip made in the recovery. It is too big. It goes first to tmpfs, which has only around 433000kB.
System will be formated, but then can´t be extracted from zip and copied to /system. No /system = you will do it all again from scratch
Changelog:
v1.7
- proximity sensor fix (with big help of steveboss and his V)
- reboot recovery working from all applications (quick settings, rom manager, recovery, etc.)(tested on T)
Download:
T4.3_PhilZCWM_6.0.4.7_LB_v1.7.zip
Screenshots
Thanks DaRk-LorD and steveboss for testing. If anything won´t work, PM them. ... Joke
Good work, peetr_
Sent from Xperia V: uniQue 2.1.3 - touch of perfection
Awesome work bro
Sent from my LT30p using Tapatalk
peetr_ said:
Caution:
Don´t try to flash rom zip made in the recovery. It is too big. It goes first to tmpfs, which has only around 433000kB.
System will be formated, but then can´t be extracted from zip and copied to /system. No /system = you will do it all again from scratch
Download:
T4.3_PhilZCWM_6.0.4.7_LB_v1.3.zip
Thanks DaRk-LorD and steveboss for testing. If anything won´t work, PM them. ... Joke
Click to expand...
Click to collapse
First thanks u for work ill give it a try when come back home and feedback
In last caution : this mean we cant use backup and restore feature in recovery? And could you provide update_su?
Oohhlala said:
First thanks u for work ill give it a try when come back home and feedback
In last caution : this mean we cant use backup and restore feature in recovery? And could you provide update_su?
Click to expand...
Click to collapse
You can use backup and restore, this is a working version, just don't flash an update.zip made with the recovery (there is an option for creating that). For SuperSU CWM flashable zip look at the download section of the original SuperSU topic
Screenshots fyp
norti said:
Screenshots fyp
Click to expand...
Click to collapse
Thanks, I will add your post to OP.
Great work bro!
peetr_ said:
Thanks, I will add your post to OP.
Click to expand...
Click to collapse
mate, plz tell me more clear about step 6 in upgrade from 4.1 instalation method.
after flash 4.3 flashable rom zip then use flashtool to flash stock rom 4.3 ftf or just kernel and in the Exclude box of flashtool, i must tick all but except System ?, sorry i'm newbie
Oohhlala said:
mate, plz tell me more clear about step 6 in upgrade from 4.1 instalation method.
after flash 4.3 flashable rom zip then use flashtool to flash stock rom 4.3 ftf or just kernel and in the Exclude box of flashtool, i must tick all but except System ?, sorry i'm newbie
Click to expand...
Click to collapse
Keep the previously installed system with recovery in your phone.
So only don't tick system (exclude system from ftf flashing). Everything else leave ticked. It's also better to wipe data between 4.1 and 4.3.
peetr_ said:
Keep the previously installed system with recovery in your phone.
So only don't tick system (exclude system from ftf flashing). Everything else leave ticked. It's also better to wipe data between 4.1 and 4.3.
Click to expand...
Click to collapse
i've got bootloop , stuck in sony logo
Data wiped in flashtool? You can't even get to recovery? Blue led is shining??
Oohhlala said:
i've got bootloop , stuck in sony logo
Click to expand...
Click to collapse
Had this the other day trying to upgrade. If you can't get into CM, Use sony pc companion to bring it back - repair option
tested on TX 4.3 official stock system
and confirmed it works
both externel and internal storage can be used to flash
:highfive::highfive:
I found one bug (your mac address and other things are not restored after factory reset). I have it already fixed. I will upload fixed version today or tomorrow. There should be no need to do factory reset again, after installation of the fix.
First post updated with fixed import from TA after factory reset - 1.4 version.
Oohhlala said:
i've got bootloop , stuck in sony logo
Click to expand...
Click to collapse
I think theres a confusion here, in flashtool you tick to wipe data, appslog and cache but below that is the list of things to exclude from flashing so if you tick on it you will not flash that part of the rom so if you tick everything here but dont tick system, everything will be excluded but system won´t son the only thing you are flashing is the system folder and so thers no kernel you´ll have a bootloop
Oh, that looks like the reason. Sorry. I will edit the OP.
daniel090588 said:
I think theres a confusion here, in flashtool you tick to wipe data, appslog and cache but below that is the list of things to exclude from flashing so if you tick on it you will not flash that part of the rom so if you tick everything here but dont tick system, everything will be excluded but system won´t son the only thing you are flashing is the system folder and so thers no kernel you´ll have a bootloop
Click to expand...
Click to collapse
Yeah, i think so, exclude kernel made my device stuck in logo.could you tell me how you get root for LB. I tries some way but none if all successful
Oohhlala said:
Yeah, i think so, exclude kernel made my device stuck in logo.could you tell me how you get root for LB. I tries some way but none if all successful
Click to expand...
Click to collapse
Flash back a 4.1.2 rom with Flashtool, root it, put a cwm on it and continue with 'Upgrading from 4.1 with CWM for LB to stock 4.3' section of the first post You can find everything in the All in One post in the Q&A section of this forum.
Hello,
I have my ZR (5503) rooted with 4.4 the bootloader is locked. Since I am not a dev or something i want to test it first. I tell what i did if a dev want to know how i did it.
I had a ZR with 4.1/rooted/recovery on it.
I used a 10.5.A.0.530 NCB file for to start.
I followed this guide (thread) http://forum.xda-developers.com/showthread.php?t=2307311
Almost at the end you have to flash the created zip in recovery. After that i flashed the SuperSU_fix.zip and update-SuperSU-v1.86.zip (i dont know if it was needed).
Then i switch the mobile off and flash the FTF file (10.5.A.0.530NCB) with system excluded (flashtool).
After this i boot in 4.4 and then checked if i had root and it was. The recovery was lost but i managed to get it back with the ZRDUALRECOVERY
Now i go to do the proces again and make a tutorial and maybe put the files somewhere.
I am happy already,
Try to use the Remount reboot fix by nut
and use foldermount and check as this is the most important thing to me
John98Zakaria said:
Try to use the Remount reboot fix by nut
and use foldermount and check as this is the most important thing to me
Click to expand...
Click to collapse
root is working good..... I am repeating the steps now and then i go to try it.
hans3103 said:
root is working good..... I am repeating the steps now and then i go to try it.
Click to expand...
Click to collapse
foldermount works....
[Stock ROM][LB/??][4.4] Pre-Rooted 10.5.A.0.230
Hello,
I found a way for to get root with kitkat 4.4 and a locked bootloader.
Try at won risk! I am not responsible for things that go wrong.
what you need for to start :
working recovery and root 4.1, 4.2 or 4.3 (i had a 4.1 android version)
Flashtool
steps:
download :
zrkitkat5503.zip https://mega.co.nz/#!DYZwTRhL!6kYealPTKNZT_YX7Zgp3gvs6BP7dcBcVa7FyZBw72qg
stripped rom 4.4 : https://mega.co.nz/#!2YZn3LyB!JKCaBQdMpkqxiO6UbbsXeF3aNgvaoe9Z6iNEERCF7aY
Update Super SU: https://mega.co.nz/#!LEIwGDCS!KVxVB-wYlClhblPY-g5MQ71D_7U2acd7hwwqAxJj20c
Recovery: https://mega.co.nz/#!GIpWEJjJ!0gEIZawEwKuvmEZ4LQm-4ZCmduoy7kxwxDLSResqvUQ
copy kitkatzr5503.zip to your external memorycard.
unzip the su-binary fix and copy it to memorycard.
boot in recovery and wipe cache partition,wipe Dalvik cache and wipe Data/Factory reset.
flash the kitkatzr5503.zip and after that flash the su-binary fix.
DONT BOOT!
power off and get your phone in flashmode , flash the stipped 4.4 rom with flashtool.
reboot and you will have root, install zrdualrecovery again and then everything works.
for sure someone else can make a more nice way for to install it but this works. And if someone make a better tutorial let me know. Also i dont have experience with MEGA for file sharing. If there is a better way let me know.
succes
hans3103 said:
Hello,
I have my ZR (5503) rooted with 4.4 the bootloader is locked. Since I am not a dev or something i want to test it first. I tell what i did if a dev want to know how i did it.
I had a ZR with 4.1/rooted/recovery on it.
I used a 10.5.A.0.530 NCB file for to start.
I followed this guide (thread) http://forum.xda-developers.com/showthread.php?t=2307311
Almost at the end you have to flash the created zip in recovery. After that i flashed the SuperSU_fix.zip and update-SuperSU-v1.86.zip (i dont know if it was needed).
Then i switch the mobile off and flash the FTF file (10.5.A.0.530NCB) with system excluded (flashtool).
After this i boot in 4.4 and then checked if i had root and it was. The recovery was lost but i managed to get it back with the ZRDUALRECOVERY
Now i go to do the proces again and make a tutorial and maybe put the files somewhere.
I am happy already,
Click to expand...
Click to collapse
My kernal is not the same as the one in the screenshot can i follow the same way?
I dont know for sure, i used a standard rom for to make this....
Sent from my C5503 using XDA Premium 4 mobile app
hans3103 said:
Hello,
I found a way for to get root with kitkat 4.4 and a locked bootloader.
Try at won risk! I am not responsible for things that go wrong.
what you need for to start :
working recovery and root 4.1, 4.2 or 4.3 (i had a 4.1 android version)
Flashtool
steps:
download :
zrkitkat5503.zip https://mega.co.nz/#!DYZwTRhL!6kYealPTKNZT_YX7Zgp3gvs6BP7dcBcVa7FyZBw72qg
stripped rom 4.4 : https://mega.co.nz/#!2YZn3LyB!JKCaBQdMpkqxiO6UbbsXeF3aNgvaoe9Z6iNEERCF7aY
Update Super SU: https://mega.co.nz/#!LEIwGDCS!KVxVB-wYlClhblPY-g5MQ71D_7U2acd7hwwqAxJj20c
Recovery: https://mega.co.nz/#!GIpWEJjJ!0gEIZawEwKuvmEZ4LQm-4ZCmduoy7kxwxDLSResqvUQ
copy kitkatzr5503.zip to your external memorycard.
unzip the su-binary fix and copy it to memorycard.
flash the kitkatzr5503.zip and after that flash the su-binary fix.
DONT BOOT!
power off and get your phone in flashmode , flash the stipped 4.4 rom with flashtool.
reboot and you will have root, install zrdualrecovery again and then everything works.
for sure someone else can make a more nice way for to install it but this works. And if someone make a better tutorial let me know. Also i dont have experience with MEGA for file sharing. If there is a better way let me know.
succes
Click to expand...
Click to collapse
Can I just flash the stock 4.4 FTF and unchecking the system instead of using the stripped rom you have provided?
Yes you can as the kernel in the picture expresses the version of the 4.4 version of android
I already done it. http://forum.xda-developers.com/showthread.php?t=2765062