[NON-DEV] [VZW] Bootloop after 4.4.2 Update - Moto X Q&A

Hey guys,
Tried updating with the 4.4.2 OTA on VZW and my phone got itself stuck in a boot loop. Gets to the android is updating sequence, says starting apps, then "Unfortunately android.proces.acore has stopped" and soft reboots. Totally stock, never rooted.
I got into system recovery and tried wiping cache but no luck with that. There are options to apply updates from sdcard and ADB, so is there a factory image for VZW 4.4 that I can push to my phone and apply it in recovery or am I SOL and have to do a factory reset? I'd hate to have to lose data...
Thanks!

ShredEight02 said:
There are options to apply updates from sdcard and ADB, so is there a factory image for VZW 4.4 that I can push to my phone and apply it in recovery or am I SOL and have to do a factory reset? I'd hate to have to lose data...
Click to expand...
Click to collapse
What version of the bootloader are you on?

Cozume said:
What version of the bootloader are you on?
Click to expand...
Click to collapse
Don't even know how to get to the bootloader on this phone. I can get into fastboot and recovery...

From powered off hold vol down +power for about 5 sec that will take you to the bootloader
Sent from my xt1060vzwDE

jwthompson said:
From powered off hold vol down +power for about 5 sec that will take you to the bootloader
Sent from my xt1060vzwDE
Click to expand...
Click to collapse
There's no way to power down. I can soft reset and get into fastboot but that's about it.

Hold the power button down for 10 sec that should hard shut down the device
Sent from my xt1060vzwDE

jwthompson said:
Hold the power button down for 10 sec that should hard shut down the device
Sent from my xt1060vzwDE
Click to expand...
Click to collapse
No dice, after I let go it boots back up...
I am able to adb sideload and I found this : https://docs.google.com/uc?id=0B9qC3vvamytkd3FTUGE5UlpjUEE&export=download (zip of the 4.4 system image).
Does applying this seem like a legit approach?

Have you tried a factory reset in recovery?
Sent from my xt1060vzwDE

__

jwthompson said:
Have you tried a factory reset in recovery?
Sent from my xt1060vzwDE
Click to expand...
Click to collapse
I haven't but I'd rather not lose texts, app data etc because those aren't saved to the internal sdcard partition, correct?

You won't lose anything that is saved to the sdcard only the app data and system data are factory reset...so yeah you will lose text but not pictures in your gallery or anything else that is saved to the sdcard
Sent from my xt1060vzwDE
---------- Post added at 09:23 PM ---------- Previous post was at 09:22 PM ----------
Imo i would do a factory reset in recovery
Sent from my xt1060vzwDE

jwthompson said:
You won't lose anything that is saved to the sdcard only the app data and system data are factory reset...so yeah you will lose text but not pictures in your gallery or anything else that is saved to the sdcard
Sent from my xt1060vzwDE
---------- Post added at 09:23 PM ---------- Previous post was at 09:22 PM ----------
Imo i would do a factory reset in recovery
Sent from my xt1060vzwDE
Click to expand...
Click to collapse
Alright, guess I'll give it a go

jwthompson said:
You won't lose anything that is saved to the sdcard only the app data and system data are factory reset...so yeah you will lose text but not pictures in your gallery or anything else that is saved to the sdcard
Sent from my xt1060vzwDE
---------- Post added at 09:23 PM ---------- Previous post was at 09:22 PM ----------
Imo i would do a factory reset in recovery
Sent from my xt1060vzwDE
Click to expand...
Click to collapse
Alright, back in business. Thanks for the help
Woah, and I'm on 4.4.2 ...

That's great :high five:
Sent from my xt1060vzwDE

jwthompson said:
You won't lose anything that is saved to the sdcard only the app data and system data are factory reset...so yeah you will lose text but not pictures in your gallery or anything else that is saved to the sdcard
Sent from my xt1060vzwDE
---------- Post added at 09:23 PM ---------- Previous post was at 09:22 PM ----------
Imo i would do a factory reset in recovery
Sent from my xt1060vzwDE
Click to expand...
Click to collapse
I did lose all of my pictures though...

Pictures should have been saved in the dcim/camera folder on the sdcard...it might take a few for the os to build back up the caches
Sent from my xt1060vzwDE

ShredEight02 said:
I did lose all of my pictures though...
Click to expand...
Click to collapse
Did you have Google+ setup to automatically backup your photos by chance?

Mr. Orange 645 said:
Did you have Google+ setup to automatically backup your photos by chance?
Click to expand...
Click to collapse
I didn't because having G+ enabled gave me battery drain... I did have an app to sync my pics with G Drive up until Jan 30th, but it wasn't working correctly so I got rid of it...
Think I'm going to use the dropbox auto upload though.
You never think something like this would happen, and bam it does.
It's so weird, I've wiped data before on my Galaxy Nexus which also uses a vitual SDcard, and I never had this happen.

jwthompson said:
Pictures should have been saved in the dcim/camera folder on the sdcard...it might take a few for the os to build back up the caches
Sent from my xt1060vzwDE
Click to expand...
Click to collapse
Yeah it should have but evidently that wasn't the case

ShredEight02 said:
Don't even know how to get to the bootloader on this phone. I can get into fastboot and recovery...
Click to expand...
Click to collapse
Getting into fastboot is the bootloader mode. Hold Volume Down + Power for about 3 seconds and release. You can read what version of the bootloader you have from fastboot mode (aka bootloader mode).

Related

[Q]Brick? o2x Keeps rebooting

Hi, suddenly my O2X lost signal and I turned off it, then I powered on and it started an endless rebooting. I have the stock 2.2.2 firmware, and don't have any microSd..
I'm trying to find a solution but I can't find the stock rom, an the app to flash it, also I didn't want to loose my photos.. =(
keroz said:
Hi, suddenly my O2X lost signal and I turned off it, then I powered on and it started an endless rebooting. I have the stock 2.2.2 firmware, and don't have any microSd..
I'm trying to find a solution but I can't find the stock rom, an the app to flash it, also I didn't want to loose my photos.. =(
Click to expand...
Click to collapse
Is it rooted?
If you have a rooted Device, then you should try to get into the recovery mode by pressing power and volume down key until u see the android(the recovery mode) and then try to restore if you have the nandroid backup....
It isn't rooted, I did the "power and volume down" and it booted, but didn't showed any menu, just booted and reinstalled back to stock, I have lost all my installed app, but no my photos...
=)
keroz said:
It isn't rooted, I did the "power and volume down" and it booted, but didn't showed any menu, just booted and reinstalled back to stock, I have lost all my installed app, but no my photos...
=)
Click to expand...
Click to collapse
Without the root, you are doing the factory setting by this menu...thats what i asked first....sorry about it mate...
---------- Post added at 10:40 PM ---------- Previous post was at 09:55 PM ----------
Mate,
I saw on the google that there is an app which can recover pictures from the sd CARD....TRY IT TO RECOVER if possible....
Don't worry, I have saved all the pictures only the app were lost, but no problem, now I'm waiting LG to lunch ICS officially..

[Q] My Bionic needs a hard rest please HELP, nothings working :SSS

Hey guys, i really need some help here, i would really like to just hard reset my phone back to stock, and then i can start from scratch on rooting and what not. My problem is , the phone just wont reset ahha.
like i go into TWRP, and using this post " http://www.droidforums.net/forum/droid-bionic-hacks/234845-factory-bionic-stock-rom-ics-4-0-4-a.html " try and restore my device. Ive so far encountered probably every problem possible...following that post i DL the file and go to past it onto the device storage but i couldn't find the 3. Copy or Move Folder to your Backups....(Ex). Sdcard-Ext/TWRP/Backup.... so i just paste it into the TWRP file directory.from there i go to boot the device, it automatically boots in to adb usb mode stating that ( flash failed) i then have to hold the volume buttons and power to bring it back to the main recovery menu to boot normally!? thats only one problem, next i have Safestrap installed, it shows the start up screen i can continue or boot into recovery. Now in recovery following the instruction in the link provided i go and i 5. Select Stock ROM slot (Activate) and go select 6. Select Restore but theres noting in it, so i just go to install and find my file that i put there. i then do step 7. Select Factory Bionic Folder and 8. Flash it ( Swipe ). TWRP says it was complete but it only shows it going into the flashing process of installing update... so i reboot the phone and same thing, i get automatically pushed to the ABD USB screen saying flash failed. ... last problem , i go to boot past and theres no OS installed ... just a black screen ... im totally lost i dont know what to do hahah , any help here people??
anyone have any ideas on how to just restore this baby straight to stock ICS? thanks
P.S sorry for the bad quality photos, that what u get for taking pics with a razr haha
Dose anyone have any ideas at all, please??
I'd suggest hooking up your Bionic to a computer and FXZ through RSDlite.
Else if phone is bricked use fastboot and use the FXZ version of the stock image.
If you need the official FXZ for 246 ICS, one place to get it from is here:
http://sbf.droid-developers.org/cdma_targa/list.php
Sent from my DROID BIONIC using Tapatalk 2
---------- Post added at 01:17 PM ---------- Previous post was at 01:13 PM ----------
Need further help?
Google this: fxz fastboot bionic
There should be a YouTube video called 'unbrick factory reset droid bionic with fast boot and fxz', near the top of the search results. Watch it
Sent from my DROID BIONIC using Tapatalk 2
collije said:
I'd suggest hooking up your Bionic to a computer and FXZ through RSDlite.
Else if phone is bricked use fastboot and use the FXZ version of the stock image.
If you need the official FXZ for 246 ICS, one place to get it from is here:
http://sbf.droid-developers.org/cdma_targa/list.php
Sent from my DROID BIONIC using Tapatalk 2
---------- Post added at 01:17 PM ---------- Previous post was at 01:13 PM ----------
Need further help?
Google this: fxz fastboot bionic
There should be a YouTube video called 'unbrick factory reset droid bionic with fast boot and fxz', near the top of the search results. Watch it
Sent from my DROID BIONIC using Tapatalk 2
Click to expand...
Click to collapse
errr, bump? Do you still need help?
Hello Bueller?

HTC One does not load and Start :(

Hey, my HTC One can't Start and when i try to load it, only the red light appears every 2 seconds.
The System is original without root or something Else.
It is possible to come in the bootmenue with Power and volume down Button.
The warranty(garanty) is Not anymore.
So what can i do? Please help me
If you can go into recovery mode wipe everything (incl. cache/date/dalvik's cache)
Simonna said:
If you can go into recovery mode wipe everything (incl. cache/date/dalvik's cache)
Click to expand...
Click to collapse
He can't do that as it's stock recovery
---------- Post added at 10:37 PM ---------- Previous post was at 10:37 PM ----------
Vogelhaus7 said:
Hey, my HTC One can't Start and when i try to load it, only the red light appears every 2 seconds.
The System is original without root or something Else.
It is possible to come in the bootmenue with Power and volume down Button.
The warranty(garanty) is Not anymore.
So what can i do? Please help me
Click to expand...
Click to collapse
Leave it charging for a while and then try again
I leave it charging but always every 2 seconds the red light appears and i think that is wrong too,or?
Doesnt work with long charging.
Yes i cant go in recovery because of stock Rom.
If your phone is fully stock, this sounds like a hardware fault. But you might run the RUU for your device, if there is one.
Ahh now i See that the Display is coming out of the phone a little Bit i realised it since now. Seems like that the glue is Not working anymore. What can i Do?

[Q] LG D415 L90 - Stuck On "udc_start()"

This is the first issue with an android phone I've had in a while where I have absolutely no idea what I should do next.
The music player was beginning to stutter a LOT on my install of CM11, and I was having issues where if I selected a song to play on my music player, the volume would suddenly spike to THE HIGHEST LEVEL, and I had to adjust the volume down to get it to reset back to normal. So I figured I'd wipe everything clean and re-install CM11. I didn't just wipe /data and /cache, but I also wiped /system because I believe the issues mentioned above came from a Sony Walkman Mod ZIP I flashed. So after formatting all of the partitions, I went to the "Install" button of TWRP (by the way, I am using TWRP 2.8.1.0) to re-install the CM11 ROM. When I tried to open the CM11 ZIP, TWRP gave me an error saying it couldn't open the file to flash it. I tried using adb sideload as well but adb sideload gave me a similar error.
So I figured it was just an issue with TWRP and that I'd have to boot into fastboot and flash a different recovery image that I know works, like shinobisoft's CWM. I power off the phone, hold the volume up button while plugging the phone back in to the USB port and I am greeted with the Download Mode screen as usual. Here's where things start to get unusual: instead of the phone taking about 1-2 seconds and presenting me with a "Fastboot Ready" line of text or something similar to that, the Download Mode screen hangs on [270] udc_start().
What should I do from here? I tried flashing back to the stock KDZ, but Download Mode needs to be working to do that. Also, I can still get into TWRP recovery just fine, and TWRP can still see all of my partitions.
jasonmerc said:
This is the first issue with an android phone I've had in a while where I have absolutely no idea what I should do next.
The music player was beginning to stutter a LOT on my install of CM11, and I was having issues where if I selected a song to play on my music player, the volume would suddenly spike to THE HIGHEST LEVEL, and I had to adjust the volume down to get it to reset back to normal. So I figured I'd wipe everything clean and re-install CM11. I didn't just wipe /data and /cache, but I also wiped /system because I believe the issues mentioned above came from a Sony Walkman Mod ZIP I flashed. So after formatting all of the partitions, I went to the "Install" button of TWRP (by the way, I am using TWRP 2.8.1.0) to re-install the CM11 ROM. When I tried to open the CM11 ZIP, TWRP gave me an error saying it couldn't open the file to flash it. I tried using adb sideload as well but adb sideload gave me a similar error.
So I figured it was just an issue with TWRP and that I'd have to boot into fastboot and flash a different recovery image that I know works, like shinobisoft's CWM. I power off the phone, hold the volume up button while plugging the phone back in to the USB port and I am greeted with the Download Mode screen as usual. Here's where things start to get unusual: instead of the phone taking about 1-2 seconds and presenting me with a "Fastboot Ready" line of text or something similar to that, the Download Mode screen hangs on [270] udc_start().
What should I do from here? I tried flashing back to the stock KDZ, but Download Mode needs to be working to do that. Also, I can still get into TWRP recovery just fine, and TWRP can still see all of my partitions.
Click to expand...
Click to collapse
Check your PM's
shinobisoft said:
Check your PM's
Click to expand...
Click to collapse
I tried your suggestion of holding the power button but that didn't work. And this is the ONE TIME where I did not make any backups. I couldn't because TWRP couldn't read my /data partition since my phone was encrypted, but before this whole thing happened I formatted /data as EXT4 (which I did before without issue), so I don't think it should be encrypted anymore.
jasonmerc said:
I tried your suggestion of holding the power button but that didn't work. And this is the ONE TIME where I did not make any backups. I couldn't because TWRP couldn't read my /data partition since my phone was encrypted, but before this whole thing happened I formatted /data as EXT4 (which I did before without issue), so I don't think it should be encrypted anymore.
Click to expand...
Click to collapse
What I said about the power button was only to help you get out of fastboot mode so you could try to get to fastboot mode again. LOL.
BTW, I always have a least 2 backups on my sdcard.
You're in a bit of a pickle... I need to think about this for a few...
**BUMP***
I went back to TWRP and tried flashing a PurePerformances .zip and it was able to flash just fine. But even with a fresh download of the CM11 ZIP It still doesn't work. Maybe I'll try flashing a different ROM.
jasonmerc said:
**BUMP***
I went back to TWRP and tried flashing a PurePerformances .zip and it was able to flash just fine. But even with a fresh download of the CM11 ZIP It still doesn't work. Maybe I'll try flashing a different ROM.
Click to expand...
Click to collapse
That's really strange. As I stated in my ROM thread, I haven't changed anything with the last build...
Whoa, just noticed the 12/2 build! I was trying to flash the 10/22 this whole time. I'll try flashing 12/2.
I tried the new build with ADB Side load. It was able to load the zip!
But the device could not be found...
Sent from my MB520 using XDA Free mobile app
jasonmerc said:
I tried the new build with ADB Side load. It was able to load the zip!
But the device could not be found...
Sent from my MB520 using XDA Free mobile app
Click to expand...
Click to collapse
So ADB debugging isn't enabled in TWRP 2.8.1.0? Have you tried another recovery? And why sideload? Why not straight flash?
shinobisoft said:
So ADB debugging isn't enabled in TWRP 2.8.1.0? Have you tried another recovery? And why sideload? Why not straight flash?
Click to expand...
Click to collapse
I can't load another recovery on here without going into fastboot. And I am currently in the process of attempting a straight flash. I am going to save the rom on an SD card on another phone then inset it in the L90.
Sent from my MB520 using XDA Free mobile app
...And the moral of this story is: change your USB cables
I'm feeling a little stupid right now...
Sent from my MB520 using XDA Free mobile app
jasonmerc said:
...And the moral of this story is: change your USB cables
I'm feeling a little stupid right now...
Sent from my MB520 using XDA Free mobile app
Click to expand...
Click to collapse
LMFAO. Lesson learned I hope. LOL
shinobisoft said:
LMFAO. Lesson learned I hope. LOL
Click to expand...
Click to collapse
I've never had this happen to me before. What's weird is the cable was able to transmit power to the device, but not data.
Sent from my LG-D415 using XDA Free mobile app
jasonmerc said:
I've never had this happen to me before. What's weird is the cable was able to transmit power to the device, but not data.
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
Ya got me. I use the same cable for PC communication. My main charger is a hardwire charger so I basically just leave my data cable attached to my PC. In fact, it's the same cable I started modding my P506 with about 2 years ago .
jasonmerc said:
...And the moral of this story is: change your USB cables
I'm feeling a little stupid right now...
Sent from my MB520 using XDA Free mobile app
Click to expand...
Click to collapse
Speaking of feeling stupid, is that the fastboot screen? Like, if I have that screen and it says "hold up till download mode" does that mean I can do fastboot commands like that????? Maybe I DID enable fastboot mode????
whodisname said:
Speaking of feeling stupid, is that the fastboot screen? Like, if I have that screen and it says "hold up till download mode" does that mean I can do fastboot commands like that????? Maybe I DID enable fastboot mode????
Click to expand...
Click to collapse
Yes, that is the fastboot screen in the picture and it passed the UDC START. What you have to do is power off the phone, hold volume up while inserting USB cable to phone, and KEEP HOLDING VOLUME UP until you see something like "fastboot: processing commands". Then you will be in fastboot.
Sent from my LG-D415 using XDA Free mobile app
How long you got to hold it? I been holding it for about 3 min and counting'
---------- Post added at 11:42 PM ---------- Previous post was at 11:27 PM ----------
http://forum.xda-developers.com/showthread.php?t=2559363
---------- Post added at 11:42 PM ---------- Previous post was at 11:42 PM ----------
For your problem
whodisname said:
How long you got to hold it? I been holding it for about 3 min and counting'
---------- Post added at 11:42 PM ---------- Previous post was at 11:27 PM ----------
http://forum.xda-developers.com/showthread.php?t=2559363
---------- Post added at 11:42 PM ---------- Previous post was at 11:42 PM ----------
For your problem
Click to expand...
Click to collapse
Its only for a few seconds.
Sent from my LG-D415 using Tapatalk
I don't think I got it. It goes into the screen but if I hold down the button it stays the same. I unplugged the coed and plugged it back in (saw something about that here but I can't find it again) fastball devices comes back with nothing. Fastboot OEM unlock gets "waiting for device" as does fastboot reboot and fastboot flash recovery recovery.IMG (I have twrp in my fastboot folder called recovery.IMG) does download mode look like all the rest of the LG phones I have seen with the S/W UPGRADE IN PROGRESS DO NOT TURN OFF TARGET. Just asking because these things are subject to change!
whodisname said:
I don't think I got it. It goes into the screen but if I hold down the button it stays the same. I unplugged the coed and plugged it back in (saw something about that here but I can't find it again) fastball devices comes back with nothing. Fastboot OEM unlock gets "waiting for device" as does fastboot reboot and fastboot flash recovery recovery.IMG (I have twrp in my fastboot folder called recovery.IMG) does download mode look like all the rest of the LG phones I have seen with the S/W UPGRADE IN PROGRESS DO NOT TURN OFF TARGET. Just asking because these things are subject to change!
Click to expand...
Click to collapse
Download mode and fastboot mode are the same. S/W Upgrade mode is totally different. S/W Upgrade mode is what you should have if you DIDN'T zero out your laf partition. If you did zero out your laf partition, then you should have access to fastboot/download mode.
If the fastboot executable isn't recognizing your device, then you must be in S/W Upgrade mode, or fastboot mode on the device had become corrupted somehow.
I remember reading in the Android Original Development section that you used the script to increase your internal data storage. Does that script mess with the laf partition? If so, there's your issue.

DroidTurbo XT1254 fails to load fully (Solved)

Stock n locked DT 1254 6.0.1 latest ota rom. When turning on phone boots until stock rom supposed to work. Then toast pops up Unfortunately system UI has stopped. When you tap ok it goes away for a few seconds then comes back no matter how many times you try it. You can push power to shut down and after vibrate tap ok and tap shutdown and will shut down. You can boot into fastboot but when you go to recovery it seems to be gone. Followed root junky's restore with rsdlight several times with latest software but didn't work. Using windows 10 pc to do this. Any help appreciated...
Found this will study up...
https://forum.xda-developers.com/ge...torola-usb-drivers-rsd-lite-firmware-t3042687
Had to use an updated win7 PC for it to function correctly and restore the turbo. Must be a bug with win10 and rsd or moto drivers even tho it said it worked...
newbe1droidx said:
Stock n locked DT 1254 6.0.1 latest ota rom. When turning on phone boots until stock rom supposed to work. Then toast pops up Unfortunately system UI has stopped. When you tap ok it goes away for a few seconds then comes back no matter how many times you try it. You can push power to shut down and after vibrate tap ok and tap shutdown and will shut down. You can boot into fastboot but when you go to recovery it seems to be gone. Followed root junky's restore with rsdlight several times with latest software but didn't work. Using windows 10 pc to do this. Any help appreciated...
Found this will study up...
https://forum.xda-developers.com/ge...torola-usb-drivers-rsd-lite-firmware-t3042687
Click to expand...
Click to collapse
You get this fixed?
Which bootloader?
using QUARK_VERIZON_6.0.1_MCG24.251-5-5_cid2_subsidy-DEFAULT_CFC.xml.zip
sd_shadow said:
You get this fixed?
Which bootloader?
using QUARK_VERIZON_6.0.1_MCG24.251-5-5_cid2_subsidy-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
No caing for very senior father and don't have all the time I want, do have 5-5 from root junky but didn't work. Possibly from using win 10. Am restoring a HP win 7 machine now doing updates and etc to try it. Thanks for checking up on me I appreciate all you've done since droid x days. Will keep updating as I can...
newbe1droidx said:
No caing for very senior father and don't have all the time I want, do have 5-5 from root junky but didn't work. Possibly from using win 10. Am restoring a HP win 7 machine now doing updates and etc to try it. Thanks for checking up on me I appreciate all you've done since droid x days. Will keep updating as I can...
Click to expand...
Click to collapse
Windows 10 can be a problem.
Sent from my Moto E (4) using Tapatalk
@sd_shadow Windows 7 machine did the trick, but getting it updated was tricky, had to make sure security essentials was installed and activated. then updates would happen. Used Motorola device mgr and rsdlite 6.2.4 then flashed QUARK_VERIZON_6.0.1_MCG24.251-5-5_cid2_subsidy-DEFAULT_CFC.xml.zip. So far signing in ok and restoring apps and data from google, see what gets restored. But still no recovery available. Did I miss something?
newbe1droidx said:
@sd_shadow Windows 7 machine did the trick, but getting it updated was tricky, had to make sure security essentials was installed and activated. then updates would happen. Used Motorola device mgr and rsdlite 6.2.4 then flashed QUARK_VERIZON_6.0.1_MCG24.251-5-5_cid2_subsidy-DEFAULT_CFC.xml.zip. So far signing in ok and restoring apps and data from google, see what gets restored. But still no recovery available. Did I miss something?
Click to expand...
Click to collapse
Why are you trying to get to recovery, it's mostly useless, on a Motorola
just trying to get it back to factory, not my phone for a friend. Thats all
OK found this for stock recovery when you see a dead andy with no command: In the dead andy screen press vol up + power for 4 seconds. if nothing happens try again, is a little tricky. Seems an update changed how you access recovery. Thanks for the help
newbe1droidx said:
just trying to get it back to factory, not my phone for a friend. Thats all
Click to expand...
Click to collapse
Rsd lite didn't wipe the device?
that's default.
Sent from my Moto E (4) using Tapatalk
---------- Post added at 06:52 PM ---------- Previous post was at 06:49 PM ----------
Motorola Firmware with CFC in the name will wipe data as part of the flashing process.
---------- Post added at 06:53 PM ---------- Previous post was at 06:52 PM ----------
Did you verify md5 of firmware file?
Yes all confirmed good, on another site they said after an ota the change took place on accessing recovery, this friend always took ota's. Maybe part of 5-5? I don't know
newbe1droidx said:
Yes all confirmed good, on another site they said after an ota the change took place on accessing recovery, this friend always took ota's. Maybe part of 5-5? I don't know
Click to expand...
Click to collapse
What step are you using to get to recovery?
Sent from my Moto E (4) using Tapatalk
Vol down and power, then vol down to recovery, then power and see the dead Andy with no command, then supposed to push down button hold and push power then let up and will be at recovery. Still waiting for apps and data to finish restoring before I try it.
newbe1droidx said:
Vol down and power, then vol down to recovery, then power and see the dead Andy with no command, then supposed to push down button hold and push power then let up and will be at recovery. Still waiting for apps and data to finish restoring before I try it.
Click to expand...
Click to collapse
sounds right, I've sometimes found the button combination at the no command screen a little tricky.
You may need to adjust how long you press the buttons, to get into recovery.
Sent from my XT1254 using Tapatalk
OK thanks very much, I guess using a win7 machine is what made it work for me. All set to use again. Thanks so much!

Categories

Resources