Related
Hi, i've used this rom via Cwm like this post was written, and i flash ok, but when i'm restarting the phone it always reboot. Can u tell me what ive did wrong?
Now i only can conect to pc via sdcard i put the basic root signed.zip and it didnt recognize.
Can annyone help me? i can copy the link of you tube here to help.
Thankss
Please be a bit more detailed the next time you describe a problem. You should at least give some exact information about what rom you have flashed and how you did it...
I suggest you to read the following and then do a clean flash via odin when you have gained some basic knowledge:
[9001][GUIDE][NOOBFRIENDLY]Starter-Guide
[GUIDE] [Flashing ROMs] Step-by-step
Hi sorry for my late answer. I read all posts for noobs and ive discovered that my phone was boot looping. I flashed the original firmware with odin. Then the basic recovery mod all with odin. After that ive rooted the phone and flashed the New twrp touch recovery mod. Then I flashed a kernel compatible with 4.4.2. And the New rom. O only Can flash the mokee 4.42 and not others I dont know why. But phone is runnig well. Ive even installed the Galaxy w drivers compatible with our phone.
Sent from my GT-I9001 using xda app-developers app
sup xda!?
I was trying to ask for this in the General Thread for CM9 but only found trouble..
After looking through the thread for over an hour, I still couldn't find a comprehensive guide on how to install CM9 on my device..
I know that you need PC-Odin for it, you need gapps and of course the zip of the ROM, but I just can't figure out what to flash, what Kernel to flash and how to..
As I saw many people asking about this, I think it would be greatly appreciated if one of you pros could spare the -minutes- it takes to give us noobs some info..
I am currently on the latest Stunner build and on the LP6-Kernel..
thanks for any help! peace
EDIT:
ok, copperdawgnc sent me to this thread:
http://forum.xda-developers.com/showthread.php?t=1424997
and told me:
"This will show you how to use PC ODIN & has GB roms to download"
so it seems that we need to use PC-Odin, as expected, and install a GB Rom first..
I know how to use Odin a bit but I still don't know what to install..
what Kernel, which ROM, any ROM? and do I really have to flash an unrooted stock and re-root..? why is that necessary?
p
Maybe this can be of some help:
http://jjpda.blogspot.com/2012/03/how-to-install-stock-odex-pre-rooted.html
nickshertzer said:
Maybe this can be of some help:
http://jjpda.blogspot.com/2012/03/how-to-install-stock-odex-pre-rooted.html
Click to expand...
Click to collapse
thanks!
so, it should go like this:
1 get ODEX PRE ROOTED N7000XXLC1 (Europe) or ODEX PRE ROOTED N7000DXLC2 (Malaysia)
2 install via PC-Odin
2.1 get PIT file and choose the 3 (?) files mentioned in the screenshot
3 after it's done: download Mobile ODIN
2. download CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip
3. load CF-Root kernel using Mobile Odin
4. get back into recovery
5. wipe data
6. install cm9 and gapps
7. wipe
8. done?
seriously?
wouldn't it work if we only install the CF-Root-Kernel LC1 (?) and flash CM9 from there through Odin?
LC1 or some other Kernel?
thx
Thanks for posting this question, MrKancho. I can't help, but have the exact same situation myself, with imilka's CM9 rom. Just want to confirm that the installation method you outlined works without any problems before trying it myself.
Thx
Sent from my GT-N7000 using XDA
You want to flash CM9 through Odin?
And how do you propose to flash a zip file using Odin?
:facepalm:
You flash CM9 and Gapps using CWMR.
I already rooted with using superoneclick, and i wanna know how to install ICS on my tab please help me. (super user it there)
Model Number
GT-P1000
Firmware Version
2.3.3
Baseband Version
P1000XXJPZ
Kernel Version
2.6.35.7
[email protected]#2
Build Number
GINGERBREAD.XXJQ1
PLEASE TELL ME HOW TO UPDATE.
Go to http://www.teamovercome.net
Just in case you don't know, overcome is Gingerbread.
You only want overcome kernel as stepping stone so you have a cwm recovery.
Once you have cwm recovery, you can flash anything, including ics.
Since you are already on JQ1, I don't think you need to follow the whole flashing their stock safe rom, since it is also a JQ1.
just grab the overcome kernel 4.0 tar, and also download ics cm9 or aokp ( your pick, go thier individual thread and read up) and latest gapps, put them on sdcard.
I think you do factory reset first, then flash overcome kernel using Odin.
Then boot into cwm recovery by pressing volume up and power on at the same time.
From recovery flash ics and then flash gapps.
Sent from my GT-P1000 using XDA
Actually more choices of rom now, SGT7 ICS by cdesai (also recommended) and Gummy (not recommended for now seems very buggy, although it has better theme).
After following priyana's instruction,
Remember, as mentioned in each instruction on the perspective rom's thread,
You will get a strange 'recovery loop' as if it's failing to install. Just go back to recovery mode (power + volume up)
and reflash the ICS-ROM .zip file.
Welcome to the world of ICS.
thank you guys very much for the information. i am a noob and i really can't see anything how to do this.. please tell me step by step how to do that if so that will be very easy me to do.. i don't know anything about rooting but i already rooted it with superoneclick root and super user is there too i don;'t know what to do with it. please help me.
Have you even visited the site that I recommended?
To help you further,
Go to
http://forum.xda-developers.com/showthread.php?p=20974872
See the guy phloke posted a cached copy of the overcome guide.
Download it, it is a .PNG graphic file.
Read it ten times.
Follow that exactly, and let us know how it goes.
Edit: after that we talk about ics.
Sent from my GT-P1000 using XDA
cj.handy said:
I already rooted with using superoneclick, and i wanna know how to install ICS on my tab please help me. (super user it there)
Model Number
GT-P1000
Firmware Version
2.3.3
Baseband Version
P1000XXJPZ
Kernel Version
2.6.35.7
[email protected]#2
Build Number
GINGERBREAD.XXJQ1
PLEASE TELL ME HOW TO UPDATE.
Click to expand...
Click to collapse
goto this forum first page #1 http://forum.xda-developers.com/showthread.php?p=23097605. it will guide you...
ISC for my GT-p1000 at&t
priyana said:
Have you even visited the site that I recommended?
To help you further,
Go to
http://forum.xda-developers.com/showthread.php?p=20974872
See the guy phloke posted a cached copy of the overcome guide.
Download it, it is a .PNG graphic file.
Read it ten times.
Follow that exactly, and let us know how it goes.
Edit: after that we talk about ics.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
First, thank you for reading this. I had rooted & unlocked my at&t GT-P1000 using custom ROM 4.1.0 from teamovercom in January, 2012. Today, I like to something new and curiousity that can I install ICS custom ROM. But I am still not confident by reading from here: " http://rootzwiki.com/topic/22246-ro...ung-galaxy-tab-p1000ln-gsm-build-38-11062012/ " (please no quote). Now, I'm asking for your generousity and patient to show me what other steps I need to do to flash ICS custom ROM after follow teamovercome user guide, and my tab still able to make/receive call and I have now, thanks again. Pleae, please, and please reply to " [email protected] ".
Best regard,
Van.
you already have Overcome, so it is dead simple
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot
To go back to GB you need to do the Odin restock all over again though.
I just put cyanogenmode 9 beta 7 and i really dont like it. So i want to downgrade to 2.3.6.
Before i upgrade to 4.0.4 i did a recovery for the 2.3.6. Do i need to install that recovery and go back to 2.3.6. , or i need to root it back?
I did a backup. not a recovery
vladrain27 said:
I just put cyanogenmode 9 beta 7 and i really dont like it. So i want to downgrade to 2.3.6.
Before i upgrade to 4.0.4 i did a recovery for the 2.3.6. Do i need to install that recovery and go back to 2.3.6. , or i need to root it back?
I did a backup. not a recovery
Click to expand...
Click to collapse
You can flash any custom rom irrespective of android version
so there is no problem in downgrading from 4.0.4 to 2.3.6
but if u want to flash the stock rom then u need odin and after flashing stock rom, flash the recovery using odin
then you can restore from recovery
Well as the person above me replied , if you were using cm7 based rom then just reboot into cwm recovery and restore the nandroid backup (if you made one ). That's all about it. Do wipe CACHE and DATA before restoring.
vishalthedevil005 said:
You can flash any custom rom irrespective of android version
so there is no problem in downgrading from 4.0.4 to 2.3.6
but if u want to flash the stock rom then u need odin and after flashing stock rom, flash the recovery using odin
then you can restore from recovery
Click to expand...
Click to collapse
Man, i really dont understand what you tried to say to me. i suck. i just want so simple steps to go back to my 2.3.6 (which i did it with odin)
and i dindt do a nandroid backup . So what do i do?
vladrain27 said:
and i dindt do a nandroid backup . So what do i do?
Click to expand...
Click to collapse
Bro don't worry.
step 1. download the respective firmware of the region where you live from here
step 2. Make sure you installed the drivers for sgm correctly
step 3. Download ODIN and ops file
step 3. Boot in download mode by pressing home+vol down+power key simultaneously. And finally connect the device to pc through USB.
step 4. Just select one package on odin choose OPS file and the md5 file downloaded in step 1, then start the process
step 5. Boom its done.
Need further help go here.
Just a simple, download cm7 rom and flash same as you flash cm9.wipe data and cache before.
Sent from my GT-S5570 using xda premium
Please don't confuse the OP by giving suggestions about custom ROMs. I guess, he simply want to revert back to stock 2.3.6 ROM.
Anyways you are good to follow this : http://forum.xda-developers.com/showpost.php?p=31766582&postcount=6
zacky86 said:
Just a simple, download cm7 rom and flash same as you flash cm9.wipe data and cache before.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
the person who posted the question wanted to downgrade to android 2.3.6 and you're asking him to download CM7?
vladrain27 said:
I just put cyanogenmode 9 beta 7 and i really dont like it. So i want to downgrade to 2.3.6.
Before i upgrade to 4.0.4 i did a recovery for the 2.3.6. Do i need to install that recovery and go back to 2.3.6. , or i need to root it back?
I did a backup. not a recovery
Click to expand...
Click to collapse
BETA 7?????????? It's the old GalaxyICS build. You should give give a shot again to ICS. Try TheWisp's version. It's perfectly stable and usable for everyday.
xperia mini
Where can I find android 2.3 firmware for my xperia mini?
Please help
aritra31 said:
Where can I find android 2.3 firmware for my xperia mini?
Please help
Click to expand...
Click to collapse
This is the forum of Galaxy Mini. Please ask this at the correct place.
Sent from my GT-S5570 using xda premium
Want to downgrade ICS 4.3 to 2.2
I have updated my mobile LG Optimus P970 but it is not getting started after upgrading it is showing olleh in the screen and its not getting started.. plz help
Hi all, I need somebody to give me some advice please.
I'm trying to root/install CM9 on my Galaxy Note (already running official ICS), I've tried several versions, all of which have entirely failed to get me past step one:
Heimdall: when I use CMD to initialize the zImage flash, it tells me "Failed to send data!"
Odin: Phone refuses to appear in Odin
Can somebody please help me?
TheRealCJ said:
Hi all, I need somebody to give me some advice please.
I'm trying to root/install CM9 on my Galaxy Note (already running official ICS), I've tried several versions, all of which have entirely failed to get me past step one:
Heimdall: when I use CMD to initialize the zImage flash, it tells me "Failed to send data!"
Odin: Phone refuses to appear in Odin
Can somebody please help me?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1329360
Everything is there..
Swyped From My Flavoured Juicy AOKP JB.
sahilarora2003 said:
http://forum.xda-developers.com/showthread.php?t=1329360
Everything is there..
Swyped From My Flavoured Juicy AOKP JB.
Click to expand...
Click to collapse
Thankyou for the help, but the problem is that Odin will not recognise my phone in Download mode.
TheRealCJ said:
Thankyou for the help, but the problem is that Odin will not recognise my phone in Download mode.
Click to expand...
Click to collapse
Do you have all the required drivers installed? Maybe you should install Kies first to have all the required driver files.
TheRealCJ said:
Thankyou for the help, but the problem is that Odin will not recognise my phone in Download mode.
Click to expand...
Click to collapse
You need not to use PC odin
Just look to thread shahil have said you
follow method 1A (if your kernel is listed there) and you are readyu to flash custom ROM, just wipe cache and data before flashing custom ROM
If your kernel is not there
Then choose method 1B
followed by flash Safe kernel like Hydarcore and with Mobile Odin
and make wipe cache and data and proceed to custom ROM installation
dr.ketan said:
You need not to use PC odin
Just look to thread shahil have said you
follow method 1A (if your kernel is listed there) and you are readyu to flash custom ROM, just wipe cache and data before flashing custom ROM
If your kernel is not there
Then choose method 1B
followed by flash Safe kernel like Hydarcore and with Mobile Odin
and make wipe cache and data and proceed to custom ROM installation
Click to expand...
Click to collapse
Thankyou, I'm sorry, I'm new to such in-depth rooting. I have it working now, thank you all for your help.
There is a Thanks button to thank people.
I think these kind of people prefer showing their appreciation by typing it... instead of 'clicking it'