[Q] pleas i need help - LG Optimus Black

i make root to my phone and i want to make flash but it give ( security error ) and i try to solve it from flash tool with room V30C_00.kdz
but give the same problem ,my phone is LG p970 and my room was ICS 4.0.4
pleas help me.

which flash tool ? use smartflash with proper files. the firmware should have an integrated recovery mod for letting you doing a factory reset

body_90 said:
i make root to my phone and i want to make flash but it give ( security error ) and i try to solve it from flash tool with room V30C_00.kdz
but give the same problem ,my phone is LG p970 and my room was ICS 4.0.4
pleas help me.
Click to expand...
Click to collapse
you need to install an earlier version (V20X) and then upgrade to version (V30X) 4.0.4 or better go to cm10.1 or 4.2.2 Mackay ... SmartFlash and y need to use bin files ...
ICS 4.0.4 no good for root or use rom manager = security error ...
*sorry bad english , im brazilian ... I'm learning ..

u should flash v10(froyo) using smart flash tool and then root by ginger break and install rom manager and CWM.
if u find v10 rom send its link to me pls!

AZjaguar said:
u should flash v10(froyo) using smart flash tool and then root by ginger break and install rom manager and CWM.
if u find v10 rom send its link to me pls!
Click to expand...
Click to collapse
wrong link sorry ...

Related

[Q] root on 2.3.4...????

it is out there somebody to help me with the cmd on the abd to install superuser.apk?
wich commands shall i use for this operation???
This might help.
http://wiki.cyanogenmod.com/wiki/LG_Optimus_2X:_Full_Update_Guide#Rooting_the_LG_Optimus_2X
many thanks pall...it is what i was looking for...thanks again
it doesn´t work pall...
i´ve flash this new version for lg2x under 2.3.4 and i want to give root persmissions but i can not do it....
1. "V20c-EUR-XX-AUG-02-2011" (you must flash it by smarhflash)
DOWNLOAD
any ideea ....
amnodaniel said:
it doesn´t work pall...
i´ve flash this new version for lg2x under 2.3.4 and i want to give root persmissions but i can not do it....
1. "V20c-EUR-XX-AUG-02-2011" (you must flash it by smarhflash)
DOWNLOAD
any ideea ....
Click to expand...
Click to collapse
That means that your previous ROM wasn't rooted? If it had been you could have flash the Topogigi ROM for example (20C) or the latest leak 20E, which are rooted..
Topogigi ROM 1.3

[Q] baseband problem

i just wanted to install a custom firmware which is gingerxperia v10, i already have the latest baseband(xx015) , but when i booted up to xrecovery and try to install the firmware, the process says: "update to latest baseband first", and i already have the latest baseband, it still wont install (sony ericsson w8).. ( help please? im just a noob
Jus22 said:
i just wanted to install a custom firmware which is gingerxperia v10, i already have the latest baseband(xx015) , but when i booted up to xrecovery and try to install the firmware, the process says: "update to latest baseband first", and i already have the latest baseband, it still wont install (sony ericsson w8).. ( help please? im just a noob
Click to expand...
Click to collapse
hi.can u please help me out.i am using SE w8 and its similar to x8..i need to upgrade it to minicm7....can u tell me how to change the baseband from 06 to 015..i tried ,but showed error readind that reinstall the drivers and try again can u please help...i tried a lot of steps...but nothing showed an effect
TrazerWalker said:
hi.can u please help me out.i am using SE w8 and its similar to x8..i need to upgrade it to minicm7....can u tell me how to change the baseband from 06 to 015..i tried ,but showed error readind that reinstall the drivers and try again can u please help...i tried a lot of steps...but nothing showed an effect
Click to expand...
Click to collapse
try reinstall PCC again
download new baseband file (I tot maybe your baseband file corrupted)
flash baseband file again
after finnish try to install the rom
nelikp said:
try reinstall PCC again
download new baseband file (I tot maybe your baseband file corrupted)
flash baseband file again
after finnish try to install the rom
Click to expand...
Click to collapse
when i tried to install 2.3.7 on my w8 it said kernal "na06" not found..
what do i need to do now?
Maybe this help!
TrazerWalker said:
when i tried to install 2.3.7 on my w8 it said kernal "na06" not found..
what do i need to do now?
Click to expand...
Click to collapse
You must download flash tool, download the correct baseband first (xx15), put the baseband file in the folder FIRMWARE, run the program and follow the instructions.
If this help you hit the THANKS button!
Jimmy Thrashmetal said:
You must download flash tool, download the correct baseband first (xx15), put the baseband file in the folder FIRMWARE, run the program and follow the instructions.
If this help you hit the THANKS button!
Click to expand...
Click to collapse
you did helped me.
i am now running 2.3.7 on my w8.
thanks.
please let me know any higher updates available for x8/w8
Which ROM are you using now?
TrazerWalker said:
you did helped me.
i am now running 2.3.7 on my w8.
thanks.
please let me know any higher updates available for x8/w8
Click to expand...
Click to collapse
Nowadays i'm using GingerCruzt revision 8.4 with stock kernel, pretty good for me!
Everytime i flash my w8 e16i baseband to .15 it remains the same and when i open the pcc it recommends me to update to latest software but my software is already the latest pls HELP ME....
try to reflash baseband 015

Install CWM, Zeus ROM on v20a

Hello. I am trying to install CWM on my p970, but it says: permission dienied. And I know why. Because it's not rooted. I want to install Zeus ROM, but I can't, cause I don't have CWM. Maybe someone knows how to install custom ROM without root.
panorisi said:
Hello. I am trying to install CWM on my p970, but it says: permission dienied. And I know why. Because it's not rooted. I want to install Zeus ROM, but I can't, cause I don't have CWM. Maybe someone knows how to install custom ROM without root.
Click to expand...
Click to collapse
which software version you got? 20A?
timvdhoorn said:
which software version you got? 20A?
Click to expand...
Click to collapse
Yes, I have stock ROM 20A
NO ROOTING = NO ZEUS
if u are NOT rooted,then u cannot install CWM...downgrade 2 froyo, root it and then install the 20N Repackaged/Zeus v1, whichever u want
downgrading to the v10 would be temporary as u wud root it immediately and install back zues/20N....i do it almost regularly (yes, i brick my phone pretty often ).
for a backup,i have v10D and the CMD scripts for rooting (via blackjack) and installing CWM.
hope i helped
you have to downgrade to V10 (with SmartFlash Tool) then root that version and use Recovery to Flash with Zip File!!

[Q] How to patch stock Rom?

Hello
I need to Root my stock ROM, I try all software and methods , no one work for me (V20a) , and I know I can use SmartFlash Tool to flash new ROM patched, but I will lose Arabic Menu, and I know I can use any patched ROM without wipe after install it and I will keep old ROM, but the problem is the old ROM will not work correct.
Q: How to patch stock Rom?
I found stock ROM here
and I need to patch it ( make it Root ) before flash it to my phone.
Best Regards
thedark1979 said:
Hello
I need to Root my stock ROM, I try all software and methods , no one work for me (V20a) , and I know I can use SmartFlash Tool to flash new ROM patched, but I will lose Arabic Menu, and I know I can use any patched ROM without wipe after install it and I will keep old ROM, but the problem is the old ROM will not work correct.
Q: How to patch stock Rom?
I found stock ROM here
and I need to patch it ( make it Root ) before flash it to my phone.
Best Regards
Click to expand...
Click to collapse
You can check this method if you didn't try it.hope it helps you
http://forum.xda-developers.com/showthread.php?t=1512203
It is specifically for kdz files.
Sent from my P-970 using Tapatalk 2
Find your ROM
extract files bin / fls
@EDIT: Use this link if you have already bin / fls v20
cracyPC Oliver
Thank you,
I try the method above but I failed
Please can anyone make this ROM Patched ( Root )
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/AARETL/V20a_00/V20A_00.kdz
I will use SmartFlash Tool to flash it to my phone.
Best Regards
ok you bin/fls V20A
use SmartFlashTool_External
end of the flashing starts CWM
flash superuser.zip
vervactor said:
@EDIT: Use this link if you have already bin / fls v20
Click to expand...
Click to collapse
What kind of v20a is it? I already rooted the UAE version. If you add additional info, I might do it for you, if I got time
vervactor said:
ok you bin/fls V20A
use SmartFlashTool_External
end of the flashing starts CWM
flash superuser.zip
Click to expand...
Click to collapse
thank you sir,
but this ROM not root, it's same stock ROM
and also after end of flash, the phone run as normal, the CWM not started.
I need the same file you upload to me but Root
Please Friends, I still need your Help.
N00BY0815 said:
What kind of v20a is it? I already rooted the UAE version. If you add additional info, I might do it for you, if I got time
Click to expand...
Click to collapse
wow, you are great man, million thanks for you.
after search in forum I found the link for ROM V20a UAE Rooted you made it.
God bless you
Finally: I want to thanks "gsal" & "vervactor" to try Help me.

unable to flash from german stock g rom to indian stock gb rom

guys i was on 4.0.4 german stock rom.and i am from india.now i am on german stock gb rom.now the problem is if i want to upgrade or downgrade to any indian stock rom through pc odin.....it fails......i am every time successful in flashing any german rom but every time unable to flash to any stock indian rom.......why my phone is stick with the german...please help
Will you please explain what steps you are following while flashing a GB Rom ?
sahilarora2003 said:
Will you please explain what steps you are following while flashing a GB Rom ?
Click to expand...
Click to collapse
i downloaded an indian stock gb rom (2.3.6 indian N7000XXKL3_N7000ODDKL1_INU) from dr.ketan's guide as he said it is easily rootable.but the issue is am on german gb rom (2.3.6 german N7000XXLC1_N7000OXALC1_DBT) and if i go back to any indian stock rom using pc odin i get a fail message.....steps which i am following are as below-
first i unzipped the rom to my desktop and unzip the pc odon 1.83 to desktop
and now i put my phone in downloading mode nd starts odin nd select pda and then select the tar file...
nw i connect my sgn to odin nd it shws yellow
nw i click on start and after sometime during factoryfs i got fail many times
NOTE-IF I WILL FLASH MY SGN TO ANY GERMAN ROM THEN I GOT SUCCESSFUL........
Change the CSC
*#272*IMEI#
Select the Indian Code and you will able to get OTA Updates from the country you selected.(Warning - This will do a hard reset on your phone)
Did you do any wipes on 4.0.4 ?? If yes , then you are screwed
Otherwise , Download Pre-rooted GB LC1 from 'bodivas' thread and flash in Odin 1.85. Make sure that it is in tar or md5 format.
Sent from my GT-N7000 using Tapatalk 2
sahilarora2003 said:
Change the CSC
*#272*IMEI#
Select the Indian Code and you will able to get OTA Updates from the country you selected.(Warning - This will do a hard reset on your phone)
Click to expand...
Click to collapse
thank you very much first of all
buddy there is no indian codein this.....just few foreign codes are here...please help
indiandroid said:
Did you do any wipes on 4.0.4 ?? If yes , then you are screwed
Otherwise , Download Pre-rooted GB LC1 from 'bodivas' thread and flash in Odin 1.85. Make sure that it is in tar or md5 format.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
yes i did unfortunately....nd forgot not to wipe.....sorry but my phone is working absolutely fine with german roms and not with any indian roms.....even i tried the csc *#272*imei# but there is no indian code.......a big question from you is my sgn is soft brick?please tell me if it is
shivg86 said:
yes i did unfortunately....nd forgot not to wipe.....sorry but my phone is working absolutely fine with german roms and not with any indian roms.....even i tried the csc *#272*imei# but there is no indian code.......a big question from you is my sgn is soft brick?please tell me if it is
Click to expand...
Click to collapse
If you wiped using ICS stock rom then it must be soft bricked I think.
sahilarora2003 said:
If you wiped using ICS stock rom then it must be soft bricked I think.
Click to expand...
Click to collapse
yes it was a stock 4.0.4 rom and i wiped it....and now what should i do to get back to indian stock gb rom as my phone is soft bricked......but it is working absolutely fine on german rom....no issues....please tell me how can i get back to indian rom......
shivg86 said:
yes it was a stock 4.0.4 rom and i wiped it....and now what should i do to get back to indian stock gb rom as my phone is soft bricked......but it is working absolutely fine on german rom....no issues....please tell me how can i get back to indian rom......
Click to expand...
Click to collapse
Do you have warranty ? If so then best way to get mobo replaced.
If not then check this thread. Maybe this could help.
http://forum.xda-developers.com/showthread.php?t=1661590
Sorry for the brick
shivg86 said:
nw i connect my sgn to odin nd it shws yellow
nw i click on start and after sometime during factoryfs i got fail many times
NOTE-IF I WILL FLASH MY SGN TO ANY GERMAN ROM THEN I GOT SUCCESSFUL........
Click to expand...
Click to collapse
I dont think your device is bricked, as other ROM you are flashing successfully, but it is weired issue.
Anyway currently your device is rooted and on safe kernel?
dr.ketan said:
I dont think your device is bricked, as other ROM you are flashing successfully, but it is weired issue.
Anyway currently your device is rooted and on safe kernel?
Click to expand...
Click to collapse
thank god ketan,u r a real super duper helper....really awesome....as sahil made me scared that i bricked my sgn...
nd mnt rooted nd nw m on german gb rom whc is from you(N7000XXLC1_N7000OXALC1_DBT)......i wiped 4.0.4 as it was nt responding
nd my phone is working absolutely fine with this rom
but i wanna go to cm9....nd please tell me my phone is fine.....cn i flash it to cm9 by using ur guide......
shivg86 said:
thank god ketan,u r a real super duper helper....really awesome....as sahil made me scared that i bricked my sgn...
nd mnt rooted nd nw m on german gb rom whc is from you(N7000XXLC1_N7000OXALC1_DBT)......i wiped 4.0.4 as it was nt responding
nd my phone is working absolutely fine with this rom
but i wanna go to cm9....nd please tell me my phone is fine.....cn i flash it to cm9 by using ur guide......
Click to expand...
Click to collapse
Bro I didn't meant to scare you.As it seems like you might bricked your device because ICS stock kernels are dangerous to wipe.
CM9 uses a safe kernel. Just use these steps and let us know if its going smoothly.
Download Abyss 4.2 from here. http://forum.xda-developers.com/showthread.php?t=1362424
Download CM9 from here http://get.cm/?device=n7000
Download Gapps from here http://goo.im/gapps/gapps-ics-20120429-signed.zip
Now Reboot phone in recovery mode.
Flash Abyss 4.2 (Redpill Original Logo Preferred)
Go to Advanced
Reboot Recovery
Full Wipe(Cache/Dalvik/Data)
Now Flash CM9
Flash Gapps
Reboot System
Hope it helps
sahilarora2003 said:
Do you have warranty ? If so then best way to get mobo replaced.
If not then check this thread. Maybe this could help.
http://forum.xda-developers.com/showthread.php?t=1661590
Sorry for the brick
Click to expand...
Click to collapse
thanks for your reply sahil ji but dnt mind
you are scaring me by saying it is bricked....as per you it is soft bricked not hard one...
and i just once again successfully flashed another gb german stock rom from ketan's guide....m successful in this.....so how cn my phone is bricked......
shivg86 said:
thank god ketan,u r a real super duper helper....really awesome....as sahil made me scared that i bricked my sgn...
nd mnt rooted nd nw m on german gb rom whc is from you(N7000XXLC1_N7000OXALC1_DBT)......i wiped 4.0.4 as it was nt responding
nd my phone is working absolutely fine with this rom
but i wanna go to cm9....nd please tell me my phone is fine.....cn i flash it to cm9 by using ur guide......
Click to expand...
Click to collapse
Shahil have just shown probability b'coz stuck at factoryfs with wiping hystory on ICS always bad sign., and we have to first rule out it, though I am not in favor of brick right now.
Root your device and Install this
And read your PM
dr.ketan said:
Shahil have just shown probability b'coz stuck at factoryfs with wiping hystory on ICS always bad sign., and we have to first rule out it, though I am not in favor of brick right now.
Root your device and Install this
And read your PM
Click to expand...
Click to collapse
ok ketan sir....sahil sir helped me and i can understand that ics can easily brick any sgn.....well i will root it now nd check it through the brickbug......afterthat i will let you know
sahilarora2003 said:
Bro I didn't meant to scare you.As it seems like you might bricked your device because ICS stock kernels are dangerous to wipe.
CM9 uses a safe kernel. Just use these steps and let us know if its going smoothly.
Download Abyss 4.2 from here. http://forum.xda-developers.com/showthread.php?t=1362424
Download CM9 from here http://get.cm/?device=n7000
Download Gapps from here http://goo.im/gapps/gapps-ics-20120429-signed.zip
Now Reboot phone in recovery mode.
Flash Abyss 4.2 (Redpill Original Logo Preferred)
Go to Advanced
Reboot Recovery
Full Wipe(Cache/Dalvik/Data)
Now Flash CM9
Flash Gapps
Reboot System
Hope it helps
Click to expand...
Click to collapse
Sorry if i said something wrong but you can understand my situation......
and sahil ji i just flashed my sgn with gb rom of german from ketan sir guide.....and guess what....it is successful
i am having problem in flashing any indian rom sir......
shivg86 said:
thanks for your reply sahil ji but dnt mind
you are scaring me by saying it is bricked....as per you it is soft bricked not hard one...
and i just once again successfully flashed another gb german stock rom from ketan's guide....m successful in this.....so how cn my phone is bricked......
Click to expand...
Click to collapse
Ok Dear. Mah Bad. But stucking at factoryfs or datafs is most probably the sign of a bricked device. Since your device is not bricked(As you claim) I am happy bro. Cheers.
shivg86 said:
Sorry if i said something wrong but you can understand my situation......
and sahil ji i just flashed my sgn with gb rom of german from ketan sir guide.....and guess what....it is successful
i am having problem in flashing any indian rom sir......
Click to expand...
Click to collapse
You mean right now you are on German GB ROM??
---------- Post added at 06:07 PM ---------- Previous post was at 06:03 PM ----------
@ Shahi
Plz dont mind sahil, it is just different opinion, and i can't say device is not bricked 100%, but i think this is still not in condition to stamp it, so better we rule out then will decide.
Regards.
sahilarora2003 said:
Ok Dear. Mah Bad. But stucking at factoryfs or datafs is most probably the sign of a bricked device. Since your device is not bricked(As you claim) I am happy bro. Cheers.
Click to expand...
Click to collapse
still not confirmed sirji.......but hope for the good....and thank you very much sahil
now please tell me...its a question from you only.....how to rrot my sgn
now i am on 2.3.6 GERMAN easily rootable N7000XXKK9_N7000OXAKK9_DBT which is from ketan.....
i have heard about cf root but i am confused how to do it from cf root
i am confused as i am unable to understand ketan's guide on root through cf root....
please you tell me

Categories

Resources